Today I though let's get cm9 on my nice nitro.
What did I do:
Rooted and installed cwm bytes version
installed custom 0.3 of kernelpanic
Today I installed cmw from the market and installed the new version.
Then I installed the cm9 but it stated that the sd card was not mounted (sdcard pointer wasn't right or something).
I tried all kind of things, but cmw would not work.
So I tried to install cwm bytes version again
[HOW TO]Install ClockworkMod Recovery The easy way
and did: dd if=/dev/block/mmcblk0p6 of=/sdcard/mmcblk0p6.backup bs=4096 and dd if=/sdcard/_ExternalSD/recovery.img of=/dev/block/mmcblk0p6 bs=4096
Then I did a restart
Nothing happened, nothing at all
No screen no download mode
When I connected it to the pc, it has some usb drivers:
qualcomm hs-usb qdloader 9008
Now what?
I am from holland, so getting it back to the US is not a good option, I also don't have an email address from the seller (ebay). I already send him an ebay message, but I don't know if he is still member or something (2 months ago I bought it).
Does someone has a solution?
The name of the windows driver is Qualcomm HS-USB Qdloader 9008
Oh ****, it looks like you flashed CWM to the wrong partition. Um, I think you're going to have to try to unbrick using a .kdz, possibly the SU640 one. My unbricking guide is out of date (my fault, but real life has kept me busy), but all the information you will need is in this thread somewhere. Please read all the posts, particularly ones toward the end of the thread that will tell you how to edit your hosts file and set up a server so that the kdz update tool will let you flash the .kdz file.
Edit, I forgot to mention this will only work if you are able to get into Download Mode. Please confirm if this is the case.
Malnilion said:
Oh ****, it looks like you flashed CWM to the wrong partition. Um, I think you're going to have to try to unbrick using a .kdz, possibly the SU640 one. My unbricking guide is out of date (my fault, but real life has kept me busy), but all the information you will need is in this thread somewhere. Please read all the posts, particularly ones toward the end of the thread that will tell you how to edit your hosts file and set up a server so that the kdz update tool will let you flash the .kdz file.
Edit, I forgot to mention this will only work if you are able to get into Download Mode. Please confirm if this is the case.
Click to expand...
Click to collapse
I doubt it. p6 is the SBL (secondary bootloader), I think emergency mode depends on it.
I cannot get into download mode, I only see ethe qualcomm driver in windows, nothing else. No screen, no nothing.
Your situation is not good. Your best bet at this point is probably getting it repaired by LG/AT&T unless aremcee or someone more knowledgeable than myself can help you rescue it somehow. Whoever's post you followed that told you to flash to p6 was horribly, horribly misguided. Unfortunately, as you know now, flashing roms the manual way can be really dangerous if you overwrite the incorrect partition. I'm sorry it ended the way it did for you...
Yeah I think I screwed up... I just wanted to get ICS on the phone, anyway.
How can I repair it? My seller does not respond, is there a possibility that someone else can get it to at&t for repairs? or wouldn't that be possible?
maybe ask someone to pull (dd if=) their sbl p6 and you could try to overwrite whatever is on yours now.
worth a shot, I know on samsung phones if this happens you need a .pit files, which will help repartition. I dont know if LG has a similar option.
what software do I have to use to get the new p6 on the phone, for samsung there is ODIN, but for lg?
See, that's the thing, the closest thing we have to Odin is the KDZ update tool and as far as I know they both kind of have a caveat of needing the emergency/download mode intact. I really don't know if there is any way to rescue your device without physically getting in it and reflashing, which most people are not equipped to do.
adb probably is no go as well huh? or you would see android/LG driver...
if this was another device I may have more ideas, but I have no exp. with LG.
{tell them you just hooked it up to Itunes to sync your playlist....an it went all weird.. hahahah}
Not sure how releveant this is but I think one of the Qualcomm Phone tools may have an option for raw memory read & raw memory write.
For example READ_MEM from address 0x0200000 to 0x0250000 (from a device with a working sbl of course) and dump it to a file.
Then WRITE_MEM and cross your fingers. Very dangerous and would take some research to find the sbl memory address.
A long shot more geared towards the technically inclined.
Is there someone who can make my phone work again? I can pay you for it, otherwise I will sell the phone, broken as it is.
My seller won't respond, so I have nowhere to go. If someone want to help me, you are welcome.
search an try a jtag solution
roydejong said:
Is there someone who can make my phone work again? I can pay you for it, otherwise I will sell the phone, broken as it is.
My seller won't respond, so I have nowhere to go. If someone want to help me, you are welcome.
Click to expand...
Click to collapse
You know, you could always ship it off to LG. I sent them mine after having the EXACT same problem, and they fixed it and it's on its way home right now!
Did you have to pay for this? Do you have the contact info? Thanks.
foxdl99 said:
Did you have to pay for this? Do you have the contact info? Thanks.
Click to expand...
Click to collapse
Don't have to pay, they can't turn it on, so how would they know ? Just go to their website and fill out a warranty support form.
rani9990 said:
Don't have to pay, they can't turn it on, so how would they know ? Just go to their website and fill out a warranty support form.
Click to expand...
Click to collapse
Does it have to be within one year of original purchase and do you have to show proof of original purchase?
Sent from my LG-P930 using xda app-developers app
i can help with jtag method
or you can buy the medusa box (like me) but it's not easy to solder the wire
nickmatine said:
i can help with jtag method
or you can buy the medusa box (like me) but it's not easy to solder the wire
Click to expand...
Click to collapse
i have the same issue with my lg connect ms 840.
would you mind to share how to unbrick it.
i only have riff box here
tyvm
For the jtags you first need to check if the cpu is supported. If it is, all you have to do is disassemble the device, locate the pins solder up and go for it. Some other model may have same pinout. Just make sure it is same layout, and check if vref and gnd are in the same place. If successful connection is achieve, you just need converted files from box support. Send them full stock rom for your model. If cpu is not supported, it will take longer and will be harder. Get into the forum support of either, medusa and riff. For the OP, see if you can send it to LG but if you can't, someone at forum that lives nearby you could help you. Only solution afaik is jtag.
Sent from my Abacus
Related
I am now owner of what may very well be a Hard Bricked Samsung Galaxy S3 with the inability to reach Download Mode and computer not recognizing my handheld. It ll happen't as I unlocked my bootloader to go in fastboot mode, it was then, all over. But of course as desperate as it may look like I've done some researches on Google and some people with different models managed to have some magic done in a situation like mine, but since I didn't own the same device the solutions were of no avail for me. So my question is, is there any sort of trickery to help me come out of this misery? Such as force installing new QHSUSB_DLOAD specifically for a Samsung Galaxy S3 or some battery related magic that could help me reach Download Mode where I could flash a stock rom back in and get back to normal? Any help would be much appreciated.
this just happened to me as well today, not to happy, my heart sank in, did u find any solutions as far as fixing this qhusb thing?
AFAIK there is no fix, same deal on all phones with the same SoC, like the one x. I could be way wrong though and I hope I am. Hope you guys get up and running soon.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
http://forum.xda-developers.com/showthread.php?t=1522351
these guys were able to fix the QHSUSB problem, i just need these samsung s3 files like they have for the sensation xe only thing is i dont kno where to get them. ;/
Sent it under warranty hoping for the best.
Bibiquadium said:
Sent it under warranty hoping for the best.
Click to expand...
Click to collapse
Most likely they will say that you voided your warranty so you may have to take it in to a JTAG service.
Bibiquadium said:
Sent it under warranty hoping for the best.
Click to expand...
Click to collapse
Any update on this? My phone did this to me last night when updating CWM. I'm about to go to Radio Shack to buy some resisters to see if I can force download mode, like on Captivates.
EDIT: Even though this video (http://www.youtube.com/watch?v=TrZUrE5Nqj0) shows that the Jig works with the GS3, I was not successful in putting it into download mode. I was able to with my captivate, just to make sure I was on the correct pins.
Hopefully the AT&T store will just swap it out and leave it at that, since I pay for insurance...I don't want to have to send it away to mobiletechvideos.com for JTAG repair, but will if necessary.
Bibiquadium said:
I am now owner of what may very well be a Hard Bricked Samsung Galaxy S3 with the inability to reach Download Mode and computer not recognizing my handheld. It ll happen't as I unlocked my bootloader to go in fastboot mode, it was then, all over. But of course as desperate as it may look like I've done some researches on Google and some people with different models managed to have some magic done in a situation like mine, but since I didn't own the same device the solutions were of no avail for me. So my question is, is there any sort of trickery to help me come out of this misery? Such as force installing new QHSUSB_DLOAD specifically for a Samsung Galaxy S3 or some battery related magic that could help me reach Download Mode where I could flash a stock rom back in and get back to normal? Any help would be much appreciated.
Click to expand...
Click to collapse
You can look all you want for a solution, there is NOT one for this problem, other than find a jtag service. Period!
---------- Post added at 10:20 AM ---------- Previous post was at 10:12 AM ----------
DjRevler said:
http://forum.xda-developers.com/showthread.php?t=1522351
these guys were able to fix the QHSUSB problem, i just need these samsung s3 files like they have for the sensation xe only thing is i dont kno where to get them. ;/
Click to expand...
Click to collapse
Wow, this is a complete waste of time. This will not work with SG3
Talking about "waist of time" you are in the wrong forum, the att sgs3 doesn't have locked bootloader (this is the att/bell/Rogers forum) Go to the Verizon sgs3 forum...
Sent from my SGH-I747M using Tapatalk
TRusselo said:
Talking about "waist of time" you are in the wrong forum, the att sgs3 doesn't have locked bootloader (this is the att/bell/Rogers forum) Go to the Verizon sgs3 forum...
Sent from my SGH-I747M using Tapatalk
Click to expand...
Click to collapse
Regardless of where the phone came from the end result is still the same... you guys are hard bricked. The only available solutions to you atm (and trust me on this I hard bricked mine aswell) is
A - Send your phone in for warrenty/insurance, dont worry about everyone saying you cant because of voided warrenty... your bootloader is screwed and they wouldnt be able to tell anything about rooting/cwm etc.
B - if warrenty/insurance is unavailable to you then your only other options are to send it to samsung to get it repaired on your own dime. Or save yourself a bit of money and send it for jtag repair which is what I did. If you live in the states the guy can have your phone back in your hands usually within 4-5 business days.
hi there
i have an SDcard of 4GB i tried on 4 S3 i747M hard bricked phones its worked ....this card let them alive to download mode by pressing volume down key +home key + power. i want to share this image but when ever i connect this card to my PC (windows) its shows (need to format your card)
is there any software so i can make image and share...to help those who hard-bricked their phones.
regards
fallenkirmit said:
Regardless of where the phone came from the end result is still the same... you guys are hard bricked. The only available solutions to you atm (and trust me on this I hard bricked mine aswell) is
A - Send your phone in for warrenty/insurance, dont worry about everyone saying you cant because of voided warrenty... your bootloader is screwed and they wouldnt be able to tell anything about rooting/cwm etc.
B - if warrenty/insurance is unavailable to you then your only other options are to send it to samsung to get it repaired on your own dime. Or save yourself a bit of money and send it for jtag repair which is what I did. If you live in the states the guy can have your phone back in your hands usually within 4-5 business days.
Click to expand...
Click to collapse
I reject your reality, and substitute my own! Ah, anyway.. any updates on this? Its been a year or so.. I have the sprint s3, but i believe it had an insecure boot image flashed to it. The emmc boot method has failed me thus far. Not sure if it's because mine is a 32gb and the debrick files for for 16gb '(which shouldn't matter), if the board for my 32gb is affected by a brick bug, or what.. The qpst tool just seems like it's the perfect tool to fix a bad bootloader on any qualcomm phone, but all the guides I've found are for other phones still. I accidentally dd'd an image of my EFS partition to the sbl2 partition. I looked up the international s3 table by mistake
---------- Post added at 06:45 PM ---------- Previous post was at 06:39 PM ----------
rasgula said:
hi there
i have an SDcard of 4GB i tried on 4 S3 i747M hard bricked phones its worked ....this card let them alive to download mode by pressing volume down key +home key + power. i want to share this image but when ever i connect this card to my PC (windows) its shows (need to format your card)
is there any software so i can make image and share...to help those who hard-bricked their phones.
regards
Click to expand...
Click to collapse
Yes. Download a live linux distro, like knopix or such. Any linux distribution will work, really. Then in a terminal you would do something like
Code:
sudo dd if=/dev/sdX of=debrick-image.img
Where the "X" in "sdX" corresponds to the sdcard you want to copy. After you insert the card, in a terminal do:
Code:
dmesg | tail
and you should be able to see that it is sdb, sdc, sdd, etc. Google the usage of "dd" if you need more info.
Thanks for info i'll try this today
Regards
Sent from my C6506 using Tapatalk
rasgula said:
Thanks for info i'll try this today
Regards
Sent from my C6506 using Tapatalk
Click to expand...
Click to collapse
did you ever get that image? i could really use it right now... :crying:
johneightyone said:
did you ever get that image? i could really use it right now... :crying:
Click to expand...
Click to collapse
yes ....i have this image now on 3 sd cards. works fine for me...but image size is too large, about 3.7 GB.
regards
Hi all (sorry for my English)!
I bricked my E986 phone while I was attempting to flash a KDZ file on it. The LG Mobile Support Tool stuck at 95%, leaving my phone in a deep brick status.
The internal partition scheme should be messed up (hence the hard brick), so it can be reflashed only using the QPST tool.
I don't want to use jtag and I'd prefer not to send it to LG... it's my main smartphone and I'd like to fix it in time for my summer holidays.
Has anyone got the necessary files to restore the low-level data that allow the phone to be recognized again by the LG Mobile Support Tool?
I think that I need these files:
- MPRG8064.hex (or the specific similar file for the Snapdragon 600 CPU)
- 8064_msimage.mbn (it should contain the partition scheme)
- g_emmc.img (i found only the F240 version of this file)
I think that there's also a way to get all those files from a working phone... any help will be appreciated.
Thank you!!!
Il Palazzo said:
Hi all (sorry for my English)!
I bricked my E986 phone while I was attempting to flash a KDZ file on it. The LG Mobile Support Tool stuck at 95%, leaving my phone in a deep brick status.
The internal partition scheme should be messed up (hence the hard brick), so it can be reflashed only using the QPST tool.
I don't want to use jtag and I'd prefer not to send it to LG... it's my main smartphone and I'd like to fix it in time for my summer holidays.
Has anyone got the necessary files to restore the low-level data that allow the phone to be recognized again by the LG Mobile Support Tool?
I think that I need these files:
- MPRG8064.hex (or the specific similar file for the Snapdragon 600 CPU)
- 8064_msimage.mbn (it should contain the partition scheme)
- g_emmc.img (i found only the F240 version of this file)
I think that there's also a way to get all those files from a working phone... any help will be appreciated.
Thank you!!!
Click to expand...
Click to collapse
Sorry to say that so far jtag is the only way to fix that kind of brick. I've seen it on the OG forums too and so far nobody has been able to fix it.
luisoman2000 said:
Sorry to say that so far jtag is the only way to fix that kind of brick. I've seen it on the OG forums too and so far nobody has been able to fix it.
Click to expand...
Click to collapse
But I saw a tutorial for the optimus G (not the 'Pro' model) in chinese that should solve the problem, with the right files... Do you mean that there are no files available on the net? Or you're just saying that there isn't a suitable method at all?
Since I don't want to disassemble the phone, I think that I will send it to LG if there is no solution left.
I havent seen anyone manage to revive a phone with that issue without the use of jtag.
I had the same problem and have sent in for repairs to LG. They have repaired the phone without asking a single question.
But that was within 1 year manufacturer's warranty..
PS I have sent it to JTAG (RIFF box) repair service before that and they were NOT able to repair it.
Il Palazzo said:
Hi all (sorry for my English)!
I bricked my E986 phone while I was attempting to flash a KDZ file on it. The LG Mobile Support Tool stuck at 95%, leaving my phone in a deep brick status.
The internal partition scheme should be messed up (hence the hard brick), so it can be reflashed only using the QPST tool.
I don't want to use jtag and I'd prefer not to send it to LG... it's my main smartphone and I'd like to fix it in time for my summer holidays.
Has anyone got the necessary files to restore the low-level data that allow the phone to be recognized again by the LG Mobile Support Tool?
I think that I need these files:
- MPRG8064.hex (or the specific similar file for the Snapdragon 600 CPU)
- 8064_msimage.mbn (it should contain the partition scheme)
- g_emmc.img (i found only the F240 version of this file)
I think that there's also a way to get all those files from a working phone... any help will be appreciated.
Thank you!!!
Click to expand...
Click to collapse
Not sure if you were able to fix your problem. I also had the QSHUSB_DLOAD. My phone (E980) was fully bricked. Would not turn on no matter what I did. After 2 days of no sleep and lots of reading and testing...I was able to get my phone back and it is now fully working. I wrote a tutorial here on xda. Here is the link http://forum.xda-developers.com/optimus-g-pro/help/fix-hard-bricked-e980-t2829684 Hope this helps.
ricanares said:
Not sure if you were able to fix your problem. I also had the QSHUSB_DLOAD. My phone (E980) was fully bricked. Would not turn on no matter what I did. After 2 days of no sleep and lots of reading and testing...I was able to get my phone back and it is now fully working. I wrote a tutorial here on xda. Here is the link http://forum.xda-developers.com/optimus-g-pro/help/fix-hard-bricked-e980-t2829684 Hope this helps.
Click to expand...
Click to collapse
Thank you... I will ask you questions on that thread
Il Palazzo said:
Thank you... I will ask you questions on that thread
Click to expand...
Click to collapse
were you ever able to get it unbricked and if yes how were you able to get it unbricked?
Hello all. Please help me. I have a v495 with root replaced by su. all was fine till I was getting ready to install the TWRP recovery. I did not even install it but I did install flashify and twrp manager approving root access but never installed/flashed the revovery img. After installing twrp manager it asked for me to select a device but did not see the v495,496 or 498 so I just exited. I restarted the device and it just sat at the at&t boot logo. again I did not install anything other than flashify and twrp manager. Anyway I panicked and searched online to reset the device thinking I could just start over. I found the directions (hold power and vol down. release power hold vol up down and power). I was able to do factory reset but now its still stuck at the a&t logo and it won't shut off.
Is there anything else I can do?
It is against XDA forum rules to post the same question in multiple threads. Please don't do this in the future. I answered you in the other (first) thread you posted about this problem.
Hi, Sorry for the duplicate post I was not aware.. I thought we just couldn't create new threads with same topic.
Anyway thanks but the waiting did not help. I installed LG Bridge and trying to do software update but I keep getting LGE MTP driver failed install errors.. Holding the up and power buttons allowed me to shut the device off and enter charge only state. Wish there was a way to reload the stock rom but I have not found any software or roms as of yet.
SOL
unfortunately for any ATT customer it is the hardest to get any firmware for any of their devices. I dont know why they feel the need to make it proprietary. I had run into the same problem and I am not getting anywhere with it. There is chinese website that says it has the stock kdz file for it but you need 5 coins or some type of BS to even look at it.
Well this socks...
I guess my car tab project will have to wait till we get some dev support. Im surprised there are so few of us seeing how these things were practically being given away at one point.
Bryan858 said:
I guess my car tab project will have to wait till we get some dev support. Im surprised there are so few of us seeing how these things were practically being given away at one point.
Click to expand...
Click to collapse
Sorry I don't have any other ideas. I feel your pain. It's a similar situation with my VK810 but at least there has been some development and TWRP was updated thankfully, plus Verizon releases the firmware.
atxdave said:
unfortunately for any ATT customer it is the hardest to get any firmware for any of their devices. I dont know why they feel the need to make it proprietary. I had run into the same problem and I am not getting anywhere with it. There is chinese website that says it has the stock kdz file for it but you need 5 coins or some type of BS to even look at it.
Click to expand...
Click to collapse
Please could you link to the Chinese site for some of us who have no alternatives? If the site does really have the firmware I don't mind paying to get it, but be certain I will re-upload and link here. Thanks.
ezeuba said:
Please could you link to the Chinese site for some of us who have no alternatives? If the site does really have the firmware I don't mind paying to get it, but be certain I will re-upload and link here. Thanks.
Click to expand...
Click to collapse
Probably the same as for my device. http://www.lgbbs.com:41/thread-838-1-1.html. Not willing to pay for it since I don't need it, but if you need it bad enough I think it equates to 10 U.S. dollars last I checked. Note that the one I linked to is supposed to be the one for my device, the VK810.
roirraW "edor" ehT said:
Probably the same as for my device. http://www.lgbbs.com:41/thread-838-1-1.html. Not willing to pay for it since I don't need it, but if you need it bad enough I think it equates to 10 U.S. dollars last I checked. Note that the one I linked to is supposed to be the one for my device, the VK810.
Click to expand...
Click to collapse
Thanks for the link, but I didn't find my model's firmware there - V495 AT&T... I would willingly pay to download this firmware so I can fix my issue. I rooted mine, didn't like the Kingroot su manager and changed it to SuperSU with Supersume and the tab didn't boot again. It just hangs at the LG logo, or if I leave it for long it will show the AT&T logo and that's all. I wish I never messed with it. Just brand new off ebay.
ezeuba said:
Thanks for the link, but I didn't find my model's firmware there - V495 AT&T... I would willingly pay to download this firmware so I can fix my issue. I rooted mine, didn't like the Kingroot su manager and changed it to SuperSU with Supersume and the tab didn't boot again. It just hangs at the LG logo, or if I leave it for long it will show the AT&T logo and that's all. I wish I never messed with it. Just brand new off ebay.
Click to expand...
Click to collapse
Kick me if this is too obvious, but have you tried Googling:
Code:
V495 TOT
or
Code:
V495 KDZ
?
Although I might be wrong, but I think I heard that Sprint and AT&T don't provide KDZs for LG devices.
Is it still under LG's warranty? Do you have the IMEI/serial number for it that you can try to RMA it through LG? I got excellent warranty service for my model when I needed it. Don't tell them what you tried doing to it, though.
It gets worse... From really bad to terribly worse... I searched and searched and searched for the V495 KDZ to no avail, but I saw for V490 and V496. I downloaded both. I tried with V490 and it flashed and booted but touchscreen was not responsive. I guess due to not being for the exact same version. I tried the V496 which is the same model but the T-Mobile variant. The flashing went well until around 85% when the screen went blank and although the flashing completed, the screen never came up again, yet it makes a sound when connected to the laptop. So I went into Device Manager on my laptop to see how things were, and what it was seeing it as was HSUSB DQLoader 9008 or something like that. A hard brick!!! All because I tried to root this device... Some things are better left without messing around with them... However, if there's any help I would appreciate it very much; this is a new tab, still with the cover screen unremoved...
ezeuba said:
It gets worse... From really bad to terribly worse... I searched and searched and searched for the V495 KDZ to no avail, but I saw for V490 and V496. I downloaded both. I tried with V490 and it flashed and booted but touchscreen was not responsive. I guess due to not being for the exact same version. I tried the V496 which is the same model but the T-Mobile variant. The flashing went well until around 85% when the screen went blank and although the flashing completed, the screen never came up again, yet it makes a sound when connected to the laptop. So I went into Device Manager on my laptop to see how things were, and what it was seeing it as was HSUSB DQLoader 9008 or something like that. A hard brick!!! All because I tried to root this device... Some things are better left without messing around with them... However, if there's any help I would appreciate it very much; this is a new tab, still with the cover screen unremoved...
Click to expand...
Click to collapse
I'm really sorry to hear about that. That sucks. Unfortunately, recovering from QHBUSB BULK 9008 mode requires a TOT file, although I've wondered if it might also work with a KDZ, but in your case you can't find either so there's really no hope.
Are you going to see if it's under warranty with LG and try to RMA it?
I guess you know this now, but never, ever flash something that's made for a different model/variant, although in your case it didn't really hurt to try since either way you were bricked.
---------- Post added at 08:01 AM ---------- Previous post was at 07:54 AM ----------
@ezeuba, I did a variation of one of the previous searches I suggested. I Googled for:
Code:
at&t v495 tot
The second and third links look promising.
roirraW "edor" ehT said:
I'm really sorry to hear about that. That sucks. Unfortunately, recovering from QHBUSB BULK 9008 mode requires a TOT file, although I've wondered if it might also work with a KDZ, but in your case you can't find either so there's really no hope.
Are you going to see if it's under warranty with LG and try to RMA it?
I guess you know this now, but never, ever flash something that's made for a different model/variant, although in your case it didn't really hurt to try since either way you were bricked.
---------- Post added at 08:01 AM ---------- Previous post was at 07:54 AM ----------
@ezeuba, I did a variation of one of the previous searches I suggested. I Googled for:
Code:
at&t v495 tot
The second and third links look promising.
Click to expand...
Click to collapse
If only I could read Chinese... Google Translate doesn't work for that site... I wouldn't mind paying to download the file, if I could see how...
ezeuba said:
If only I could read Chinese... Google Translate doesn't work for that site... I wouldn't mind paying to download the file, if I could see how...
Click to expand...
Click to collapse
Although the "Translate this page" link next to each search result didn't work, it still translated fine for me after loading both pages the normal way.
If only there was a way to 'make' a tot file from another V495 tab's files... I got the second one now and have no intention of messing with it again. I only wonder if it were possible to 'create' a tot file one can use in unbricking the bricked one... Just a thought...
ezeuba said:
If only there was a way to 'make' a tot file from another V495 tab's files... I got the second one now and have no intention of messing with it again. I only wonder if it were possible to 'create' a tot file one can use in unbricking the bricked one... Just a thought...
Click to expand...
Click to collapse
I've wondered about the same - possibility to create KDZs and TOTs out of partition image files. After all, there are tools to extract both, so although possibly more difficult, theoretically it should be possible to create both. I have no knowledge that would help look into the possibility, however.
Did you pursue any further getting to that page? I can still get to it fine.
roirraW "edor" ehT said:
I've wondered about the same - possibility to create KDZs and TOTs out of partition image files. After all, there are tools to extract both, so although possibly more difficult, theoretically it should be possible to create both. I have no knowledge that would help look into the possibility, however.
Did you pursue any further getting to that page? I can still get to it fine.
Click to expand...
Click to collapse
Yea, I could get to that page but still cannot make out how to pay to download the KDZ. It would be great if any mandarin speakers could help us out...
ezeuba said:
Yea, I could get to that page but still cannot make out how to pay to download the KDZ. It would be great if any mandarin speakers could help us out...
Click to expand...
Click to collapse
Did you get it to translate by choosing to translate *after* loading the webpage? You should first register on the site in the upper right corner.
You probably have to buy credits using PayPal, then use those credits to buy the link to the TOT, lower on the page.
First of all: Do not continue if you don't know what a hard brick is!!!
so well its that simple: Either my method will work or fail.
Please follow the story here now:
https://forum.xda-developers.com/g4/general/bl-unlock-unlock-bootloader-proof-t3648288
Previously this was the OP:
if not: this could result in a completely unusable device (soft or even hard bricks are possible)
If it works: you could unlock your phone in fastboot with a simple command - no unlock key is required (but even when the method WORKS its possible that this produces other issues. we can not know all impacts yet)
So AGAIN
The whole process is dangerous but the chance to get an unlocked phone would be worth it - maybe. It depends on you.
I can't test it atm by myself because my device is on its way to LG (due to another issue)..
My method does not modify something within the bootloader like others tried already - because this would definitively break the boot chain.
I will not release any details to the public until there is anything proofed or verified. The whole process is very risky and as said: I have currently no device to test it.
The only thing which is proofed is the theory. It should work as long as nothing unpredictable happens: As long as we do not own the complete sources of all parts of the boot chain there is still a risk.
Keeping the details under the hood is not to make things mysterious. It's just for safety reasons until I can proof anything.
If you still ask for details here or by PM they will not be answered.
If you not able to join an IRC channel you better leave it directly.
I'm not 24/7 online but usually from Mo-Fr for sure so it is important to wait for answers while in the IRC because depending on your timezone this can take some hours (hey I have to sleep somewhen!)
Once I have my device back from LG I can test the method by myself on a H815 EUR version. It doesn't matters that this can be officially unlocked though. The risks are the same.
So if you're too scared for the moment just wait about 2 weeks or so and then I can tell if it worked on my device at least.
.... and if you do not want to wait: Follow me into the IRC for instructions
If you never were in touch with IRC before here are some client examples for you:
PC (HexChat and Pidgin are only 2 of them! This list is not complete!)
Android (Yaaic, AndChat, HoloIRC, AndroIRC are only a few of them! This list is not complete!)
The IRC channel is: #Carbon-user
The IRC server network is: freenode
Once you're connected with the IRC network I need this from you:
your phone model
the currently installed EXACT firmware (link to the used KDZ would be most helpful. If you have none check the phone details and e.g. make screenshots)
.
reserved
Super excited about the possible G4 unlock! Wish I could test it but my phone is my daily driver and my source of internet at home so if it breaks, I'm screwed for my online classes. Thanks for your hard work as always!
steadfasterX said:
reserved
Click to expand...
Click to collapse
ima see if i can get her to boot up since mines about trashed anyways lol
ls991
zv6 firmware
lol i got the perfect test subject if she will boot
cant try it on a g5 can you
Good luck to the testers, we're all rooting for an unlocked H818p Brazil.
TheMadScientist420 said:
ima see if i can get her to boot up since mines about trashed anyways lol
ls991
zv6 firmware
lol i got the perfect test subject if she will boot
cant try it on a g5 can you
Click to expand...
Click to collapse
is download mode working?
zv6 is LL or MM?
Go familiar with IRC asap then.. see u there
.
steadfasterX said:
is download mode working?
zv6 is LL or MM?
Go familiar with IRC asap then.. see u there
.
Click to expand...
Click to collapse
no she wont boot anything dead as can be like no power no nothing pc dont even been when plugged in
---------- Post added at 06:59 AM ---------- Previous post was at 06:48 AM ----------
ive took her apart like 5 times hoping something stupid shes got a hairline crack in the motherboard rite by the main camera rite on the top
Unbrick
TheMadScientist420 said:
no she wont boot anything dead as can be like no power no nothing pc dont even been when plugged in
---------- Post added at 06:59 AM ---------- Previous post was at 06:48 AM ----------
ive took her apart like 5 times hoping something stupid shes got a hairline crack in the motherboard rite by the main camera rite on the top
Click to expand...
Click to collapse
It happened to mine 818p too, you need to disasseble it and short two pins on the motherboard while starting it. (They are in the upper left corner on the MB.) This page (forum.gsmhosting.com/vbb/f779/unbrick-lg-g4-brick-hs-usb-qdloader-9008-without-box-2211744/) has the entire process explained but I was unable to sucessfully use the QFIL app, it didnt recover anything, at least the phone was seen on PC as the 9008 serial port. I hope it helps
P.S: Sorry for my bad english.
i hope you get it going man. so lots of users can enjoy this device like it should be.. youll be saving LG G4.. am glad that what i mentioned you got your brain thinking and finding ways i beleive this all was what i mention on fish. good luck to all of you.:fingers-crossed:
Tomonok said:
It happened to mine 818p too, you need to disasseble it and short two pins on the motherboard while starting it. (They are in the upper left corner on the MB.) This page (forum.gsmhosting.com/vbb/f779/unbrick-lg-g4-brick-hs-usb-qdloader-9008-without-box-2211744/) has the entire process explained but I was unable to sucessfully use the QFIL app, it didnt recover anything, at least the phone was seen on PC as the 9008 serial port. I hope it helps
P.S: Sorry for my bad english.
Click to expand...
Click to collapse
Its not bricked. I thre it about 6 months ago. Destroyed her. It cracked the mb ruined the rear camera. The earpice speaker. Ir port. And wifi antenna.
I put a old cracked screen on her and been using it since til about 2 or weeks ago it just shut off. Dead. It has heavy damage interiorly. I got the multimeter out and not getting any voltage any where on the board. Thats why i say if itll boot i got a perfect canidate
---------- Post added at 01:45 PM ---------- Previous post was at 01:43 PM ----------
raptorddd said:
i hope you get it going man. so lots of users can enjoy this device like it should be.. youll be saving LG G4.. am glad that what i mentioned you got your brain thinking and finding ways i beleive this all was what i mention on fish. good luck to all of you.:fingers-crossed:
Click to expand...
Click to collapse
Im trying to solder a coulple point together on mb to see if shell boot. But im jot even gettin charging lights.
---------- Post added at 01:45 PM ---------- Previous post was at 01:45 PM ----------
Like i said ill throw down my g5 on nougat lol. If it work for her should for g4
TheMadScientist420 said:
Its not bricked. I thre it about 6 months ago. Destroyed her. It cracked the mb ruined the rear camera. The earpice speaker. Ir port. And wifi antenna.
I put a old cracked screen on her and been using it since til about 2 or weeks ago it just shut off. Dead. It has heavy damage interiorly. I got the multimeter out and not getting any voltage any where on the board. Thats why i say if itll boot i got a perfect canidate
Click to expand...
Click to collapse
Oh, sorry, I thought it was bricked, not physically broken.
Tomonok said:
Oh, sorry, I thought it was bricked, not physically broken.
Click to expand...
Click to collapse
Yea i still used it for about 6 months. Put the fish to her. Even still vred with thr cracked screen. Like i said. Went to check the time and nothin. So im assuming shes dead. Ive done got a g5.no root and no twrp. Yea. Just the way i like it. I know i know. If i wanted root i shoulda bought an unlockable model. But i take what i can get cheap. Bought my sprint g5 for 25 bucks at a police auction
steadfasterX said:
is download mode working?
zv6 is LL or MM?
Go familiar with IRC asap then.. see u there
.
Click to expand...
Click to collapse
Hi, I have the model H815T but... now it Hard Bricked haha. Anyway, I can boot it like LS991 model (with QFIL), and Download Mode it's working too. So... is useful for your method?
steadfasterX said:
First of all: Do not continue if you don't know what a hard brick is!!!
so well its that simple: Either my method will work or fail.
if not: this could result in a completely unusable device (soft or even hard bricks are possible)
If it works: you could unlock your phone in fastboot with a simple command - no unlock key is required (but even when the method WORKS its possible that this produces other issues. we can not know all impacts yet)
So AGAIN
The whole process is dangerous but the chance to get an unlocked phone would be worth it - maybe. It depends on you.
I can't test it atm by myself because my device is on its way to LG (due to another issue)..
My method does not modify something within the bootloader like others tried already - because this would definitively break the boot chain.
I will not release any details to the public until there is anything proofed or verified. The whole process is very risky and as said: I have currently no device to test it.
The only thing which is proofed is the theory. It should work as long as nothing unpredictable happens: As long as we do not own the complete sources of all parts of the boot chain there is still a risk.
Keeping the details under the hood is not to make things mysterious. It's just for safety reasons until I can proof anything.
If you still ask for details here or by PM they will not be answered.
If you not able to join an IRC channel you better leave it directly.
I'm not 24/7 online but usually from Mo-Fr for sure so it is important to wait for answers while in the IRC because depending on your timezone this can take some hours (hey I have to sleep somewhen!)
Once I have my device back from LG I can test the method by myself on a H815 EUR version. It doesn't matters that this can be officially unlocked though. The risks are the same.
So if you're too scared for the moment just wait about 2 weeks or so and then I can tell if it worked on my device at least.
.... and if you do not want to wait: Follow me into the IRC for instructions
If you never were in touch with IRC before here are some client examples for you:
PC (HexChat and Pidgin are only 2 of them! This list is not complete!)
Android (Yaaic, AndChat, HoloIRC, AndroIRC are only a few of them! This list is not complete!)
The IRC channel is: #Carbon-user
The IRC server network is: freenode
Once you're connected with the IRC network I need this from you:
your phone model
the currently installed EXACT firmware (link to the used KDZ would be most helpful. If you have none check the phone details and e.g. make screenshots)
.
Click to expand...
Click to collapse
Now out of curiosity would a bootlooped g4 work. Most of em boot into dl mode and if it bricks dl modde youd know rite away anyways right?
the_naxhoo said:
Hi, I have the model H815T but... now it Hard Bricked haha. Anyway, I can boot it like LS991 model (with QFIL), and Download Mode it's working too. So... is useful for your method?
Click to expand...
Click to collapse
Qcom 9008 mode? It could be fixed afaik.. You can also try the sdcard boot method for this kind of brick. you should try that first in any case..
I'm not sure if my method will work in that kind of brick mode you are in but if you nevertheless want to test you need Linux / best is using FWUL because it has everything needed inside.
Once ready went to IRC on Mo-Fr and stay until Im there.
TheMadScientist420 said:
Now out of curiosity would a bootlooped g4 work. Most of em boot into dl mode and if it bricks dl modde youd know rite away anyways right?
Click to expand...
Click to collapse
it depends. When it stays in download mode without looping.. yes - maybe!
I need access to to the partitions which may work even in download mode via a special shell but it may requires MM and will not work for LL firmware (strange right? normally one would expect the other way around..).
That has to be tested though. On my device (locked H815) I had access but that may differ from other models.
Having root access makes things so much more easier
Testing if it would be possible on a bootlooping device would be simple:
You best use FWUL (recommended because here is all installed and working) or any other Linux with the LGLaf shell.
You would then connect while in download mode and you will have a shell like in adb.
I can guide you but again IRC is the best way to go here..
I'm searching since several days for such looping and even otherwise broken/defect devices but they all want to have a plenty of money for it (80-150 €!!)
.
steadfasterX said:
Qcom 9008 mode? It could be fixed afaik.. You can also try the sdcard boot method for this kind of brick. you should try that first in any case..
I'm not sure if my method will work in that kind of brick mode you are in but if you nevertheless want to test you need Linux / best is using FWUL because it has everything needed inside.
Once ready went to IRC on Mo-Fr and stay until Im there.
.
Click to expand...
Click to collapse
Yes, QCOM 9008 mode. I can't flash the H815 image and make my G4 H815 again so, the only way to booting, it's flashing the LS991 image (and with Fastboot; I flashing every partition one by one).
I have Linux Mint whit adb/fastboot drivers, It's enough?
the_naxhoo said:
Yes, QCOM 9008 mode. I can't flash the H815 image and make my G4 H815 again so, the only way to booting, it's flashing the LS991 image (and with Fastboot; I flashing every partition one by one).
I have Linux Mint whit adb/fastboot drivers, It's enough?
Click to expand...
Click to collapse
Hmm I can't help you unbricking. I just know that there are ways to do so. You need the correct drivers etc.. But well if you tried all this already we can try
Any Linux is ok as long as you can handle it
Havin TeamViewer installed may help too...
Well so if you like go to IRC Monday to Friday and we will see
Edit:
--------
Do you have seen this? https://forum.xda-developers.com/g4/help/lg-g4-force-to-enter-qhsusbbulk-t3633583
.
Sent from my LG-H815 using XDA Labs
So... This has been quite quiet... Has anyone tried this method yet??
Sent from my LG-H870 using Tapatalk
U
lmiked said:
So... This has been quite quiet... Has anyone tried this method yet??
Click to expand...
Click to collapse
Yes. today I have bad and good news.
First of all I had 1 single tester who was brave enough going the first approach I had. Unfortunately my first idea failed.
JL if you see this come back I said I can unbrick your device!!!
Ok so the good news are: I'm able to give you a near unlocked experience with all the things you love like installing custom kernel, recovery and ROM. Without actually unlocking!!! It's all tested on a h815 device which was never unlocked !
Near unlocked means it will behave like an unlocked device without actually unlocking the bootloader. Or to say it in other words: The boot chain verification is ignored.
The bad news: the process is not cleaned out yet but it requires one thing for sure: it will convert your whole device bootloader stack. The basic idea is to replace the whole bootloader stack with a modified one which allows all the mentioned things.
That way is very risky and I HARD bricked my device over 30 times until getting to the finally working result.
It also means that once your device is converted there is no way back atm. Flashing an original kdz will BRICK your device in 9008 mode! Not that bad because you can recover at any time but that's one thing you have to have in mind. It may never be a h811, h812..... whatever again. Until we find a corresponding and working bootloader replacement which may never happen. So no LG up or LG flash tools anymore! Instead you will have the qfil tool.
Again I know no way back to original state so warranty will be very very likely refused once you do this. Ok there is a way to blank out all partitions just for the case you need to send it really back. This should delete then most traces of this hack but no guarantees.
Besides this I don't know if there are any issues in functionality after doing all this. I havent made any tests for this yet. That includes phone calls, WiFi etc. I just checked booting ROM, booting TWRP, flashing supersu, getting root.
I will upload a video asap to show you the current result.
I need to test things further and of course I need testers with other devices. Again that process is risky and even if it worked for me it may not work for you (very unlikely but who knows). Manually forcing the 9008 is very easy and it may be required to do so. This may requires opening the device (I think it will work even without but I need testers.. ) so if you want to test... See you in the IRC.
If all this is working and verified by others I will provide the whole story ofc!
....can't believe that all these above took me 5 days in full time of work. And for what? I mean I do not need it because I can unlock my device OFFICIALLY..
BUT it was all for educational learning. I learned really a LOT of android and qcom during all these hours ...
Ok but Now I need some couple of hours of sleep
See u on the other site..
sfX
.
Sent from my LG-H815 using XDA Labs
so........what now ? i have a F500k device . and i'm willing to test your method . but i'm not sure what you are saying here. ( i didn't understand a single word) . but if it means that i can't flash official KDZ or can't use LGUP....no problem to me.
just share to me how i'll do it and if i hardbrick how i'll restore it. thats all.
Hi guys;
So i bought a second hand unlocked D851 ( TMOBILE) with kitkat (cloudy rom) wanted to upgrade it to lolipop but i hard bricked it then used board diag program to bring it back to life but i extracted a d850 rom TOT since the d851 didnt work so now my lg g3 is at&t and permenantly locked ,been trying for a week now to unlocked it for nothing then I read somewhere in this forum that its easy to unlock the d851 using the tmobile app. so is there any way to change it back to D851.
Anyone has any idea?!!
how u use the board diag cuz im stock in qualcomm hs-usb qdloader 9008 and the threadt is closed now
ipus89 said:
how u use the board diag cuz im stock in qualcomm hs-usb qdloader 9008 and the threadt is closed now
Click to expand...
Click to collapse
Try this thread... it is still open & active: https://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359
startswithPendswithOOH said:
Try this thread... it is still open & active: https://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359
Click to expand...
Click to collapse
how about my problem??!!!
nice8man said:
how about my problem??!!!
Click to expand...
Click to collapse
1)What do you mean permanently locked...carrier/sim, mcafee security, something else? If it's carrier you can order a sim unlock code off of ebay for @$4.00 us, or use any other sim unlock services out there.
2)If you changed a d851 to a d850 using board diag and manually loading the partitions - then why not extract a d851 tot and do the same thing?
startswithPendswithOOH said:
1)What do you mean permanently locked...carrier/sim, mcafee security, something else? If it's carrier you can order a sim unlock code off of ebay for @$4.00 us, or use any other sim unlock services out there.
2)If you changed a d851 to a d850 using board diag and manually loading the partitions - then why not extract a d851 tot and do the same thing?
Click to expand...
Click to collapse
thank you for the reply.
1- its carrier unlock + i have no online wallet and i cant get one
2- thats what im looking for is there a way to manually load d851 partitions i mean when i loaded d850 partitions my phone was in dload mode ( hard bricked) do i have to hard unbrick now again?
by the way i can search for other carriers and i find mine under rat:GSM but i m unable to connect to it .
nice8man said:
thank you for the reply.
1- its carrier unlock + i have no online wallet and i cant get one
2- thats what im looking for is there a way to manually load d851 partitions i mean when i loaded d850 partitions my phone was in dload mode ( hard bricked) do i have to hard unbrick now again?
by the way i can search for other carriers and i find mine under rat:GSM but i m unable to connect to it .
Click to expand...
Click to collapse
1) I don't know of a free way to get an unlock code, so if you can't order one you're probably stuck. Pay a friend who can order one for you?
2) If we're on the same page here and you previously used the board diag tool then that should work again. Hard brick usually shows up in your device manager as qualcomm 9008 instead of an lg device, so to get back to that condition you would have to open the phone up and short a pin -
follow the guide in the link I posted before and you should be good to go. I don't have links for any d851 tot files though...sorry, not my variant.
startswithPendswithOOH said:
1) I don't know of a free way to get an unlock code, so if you can't order one you're probably stuck. Pay a friend who can order one for you?
2) If we're on the same page here and you previously used the board diag tool then that should work again. Hard brick usually shows up in your device manager as qualcomm 9008 instead of an lg device, so to get back to that condition you would have to open the phone up and short a pin -
follow the guide in the link I posted before and you should be good to go. I don't have links for any d851 tot files though...sorry, not my variant.
Click to expand...
Click to collapse
so i need to hard brick my phone again?
nice8man said:
so i need to hard brick my phone again?
Click to expand...
Click to collapse
Unfortunately...I think so. If you were to try and use the lg flash tool and try and tot a d851 file into a d850 it'll probably throw some errors - model check, for ex - and won't flash. You can try and see for yourself if you'd like...here's a link for a couple tools; the 1st is kdz method, second is tot: https://forum.xda-developers.com/showthread.php?t=2785089
To brick it again follow guide I linked( https://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359), short that 2nd jtag pin in the pic for @5 seconds, plug in the usb, and it should go to qualcomm 9008. You already know how to do the rest as far as loading partitions and such, and if you don't the guide will tell you what to do.
Good luck :good:
startswithPendswithOOH said:
Unfortunately...I think so. If you were to try and use the lg flash tool and try and tot a d851 file into a d850 it'll probably throw some errors - model check, for ex - and won't flash. You can try and see for yourself if you'd like...here's a link for a couple tools; the 1st is kdz method, second is tot: https://forum.xda-developers.com/showthread.php?t=2785089
To brick it again follow guide I linked( https://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359), short that 2nd jtag pin in the pic for @5 seconds, plug in the usb, and it should go to qualcomm 9008. You already know how to do the rest as far as loading partitions and such, and if you don't the guide will tell you what to do.
Good luck :good:
Click to expand...
Click to collapse
the link you attached is for mobiles that are already hard bricked mine is not
nice8man said:
the link you attached is for mobiles that are already hard bricked mine is not
Click to expand...
Click to collapse
Yeah....and?
Re-read your previous post where you asked if you'll have to brick it again.
I said yes, and gave you a link on how to do it. Did you read the link? My guess would be no, since the 1st 4 steps tell you how to brick it and enter qualcomm9008 mode.
You're on your own now. Good luck. And you're welcome for the time I spent trying to help you.
startswithPendswithOOH said:
Yeah....and?
Re-read your previous post where you asked if you'll have to brick it again.
I said yes, and gave you a link on how to do it. Did you read the link? My guess would be no, since the 1st 4 steps tell you how to brick it and enter qualcomm9008 mode.
You're on your own now. Good luck. And you're welcome for the time I spent trying to help you.
Click to expand...
Click to collapse
Thank you for your replies man i really appriciate it...i have read that topic like 5 times; maybe i dont understand english very well but when i read the title LG G3 Hard Brick Recovery+ Required Materials:Bricked LG G3 i thought he meant that this topic is for people that has thier phone bricked and need to recover them.
nice8man said:
Thank you for your replies man i really appriciate it...i have read that topic like 5 times; maybe i dont understand english very well but when i read the title LG G3 Hard Brick Recovery+ Required Materials:Bricked LG G3 i thought he meant that this topic is for people that has thier phone bricked and need to recover them.
Click to expand...
Click to collapse
It's cool. Yes the guide is for already bricked phones, but what I was trying to say is since you have a functional phone rt now you're gonna have to brick it, and by brick it I mean qualcomm9008 mode, and that's what the 1st part of the guide shows you how to do by shorting out the pin. Once you get to Qualcomm mode you can then use the board diag tool and load your partitions that you extracted from the tot and hopefully get back to your original d851 phone and get back up and running. Does that make more sense?
Again...good luck
startswithPendswithOOH said:
It's cool. Yes the guide is for already bricked phones, but what I was trying to say is since you have a functional phone rt now you're gonna have to brick it, and by brick it I mean qualcomm9008 mode, and that's what the 1st part of the guide shows you how to do by shorting out the pin. Once you get to Qualcomm mode you can then use the board diag tool and load your partitions that you extracted from the tot and hopefully get back to your original d851 phone and get back up and running. Does that make more sense?
Again...good luck
Click to expand...
Click to collapse
I did not know that you can hard brick the phone by shorting the pins; thank you.
startswithPendswithOOH said:
It's cool. Yes the guide is for already bricked phones, but what I was trying to say is since you have a functional phone rt now you're gonna have to brick it, and by brick it I mean qualcomm9008 mode, and that's what the 1st part of the guide shows you how to do by shorting out the pin. Once you get to Qualcomm mode you can then use the board diag tool and load your partitions that you extracted from the tot and hopefully get back to your original d851 phone and get back up and running. Does that make more sense?
Again...good luck
Click to expand...
Click to collapse
I hard bricked it again and then extracted another D851 tot and then loaded all the necessary partitions but the phone still on qload mode i copied the sbl1.mbm of the D850 and tried them with D851 partitions the phone revived but not in download mode.
I managed tp recover all partitions and the phone is on dowloading mode but still detected as d850 so i have the dll cross error everytime i try to flash a rom even with using the custon dll file.