Rogers OTA - AT&T, Rogers, Bell, Telus Samsung Galaxy S III

Hey,
I got an update notification this morning on Rogers. It is 86mb. I dont know what is new since i didnt install. Can I install over top of Clockwork recovery? If not how do I put stock recovery back on (Prefer not having to wipe data).
Thanks,
-Luke

Also received one on Telus gonna unroot first, apply and get back as soon as I can
Sent from my SGH-I747M using xda app-developers app

Jordayum said:
Also received one on Telus gonna unroot first, apply and get back as soon as I can
Sent from my SGH-I747M using xda app-developers app
Click to expand...
Click to collapse
Do you have cwm? Can I just flash the root without screwing up the flash counter again ?
Sent from my SGH-I747M using xda app-developers app

I received one on Telus this morning as well. I didn't download b/c I'm not on wifi, but I'm curious as to what it is.

BAreEhD said:
I received one on Telus this morning as well. I didn't download b/c I'm not on wifi, but I'm curious as to what it is.
Click to expand...
Click to collapse
I assume its the brightness in notifications.
Sent from my SGH-I747M using xda app-developers app

I downloaded the update but could not install it since I don't have the stock recovery. It tries to boot into the stock recovery but because I have TWRP installed it booted into that. I'll try a Kies update later to see if that works.

I got my notice and automatic download for mine as well on the Bell network. Samsung Canada along with the main carriers have put out the new I747MVLALH1 Firmware. Our OTA updates are smaller and will very by carrier because they only contain the files that need to be updated rather then the whole firmware itself.
This is very good news for all us Canadian 747 users because the LH1 Modem along with the firmware changes include a great deal of proformance/bug fixes, our launch firmware with our phones was kinda the ****s to say the least so this new one should really help out.
As for keeping root. I am using SuperSU root paid for the Pro version which has a Root keeper funtion in it when you update via OTA. However the update does require the stock recovery so if you have flashed CWM recovery you will need to flash the stock one back first then apply the update.
Just finishing my phone backup atm to my computer then will try the OTA Root Keeper and see how well it works out for me.

Any chance someone could post the modem I747MVLALH1?

I'm still home and downloading as we speak. I will cancel before the installation and if its still not posted online by the time I get to work, I will upload it somewhere.
BTW, the Rogers update is the same size. I have a feeling this update will include the removal of Universal search.
Sent from my SGH-I747M using xda app-developers app

Did the update this morning on bell it was 100mb... I notice the brightness slider but haven't seen anything else yet...

xpirozx said:
Did the update this morning on bell it was 100mb... I notice the brightness slider but haven't seen anything else yet...
Click to expand...
Click to collapse
Ditto
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my Radio Shack TRS - 80

I installed the telus update this morning and universal search still works and we have the screen brightnes bar . Also seem to get a better signal when runing modem on Lte.
Sent from my SGH-I747M using XDA Premium HD app

That's good news, hopefully same for Rogers since my network connection hasn't been great compared to SGS2
Sent from my SGH-I747M using xda app-developers app

Anyone have a flashable version of this for the rooted folks?

Ymodem-G said:
Anyone have a flashable version of this for the rooted folks?
Click to expand...
Click to collapse
I updated via the OTA, I try'd out Chainfires SuperSU Pro version which has a Root Keeper function to maintain root while updating on OTA, it did not work for our Canadian Models unfortunately but that is okay it is an experimental function anyways. At any rate I simpled flash CWM and push the SuperSU root app back onto my phone via CWM just fine to retain my root, and you can quickly and easily use chainfires Triangle away app to reset your flash counters.
Everything has worked fine for me. I am using the new LH1 firmware on my Bell phone and I am completed Rooted ^_^
For those less experianced and dont mind waiting for a root injected rom that is all good. For others you can take the steps I did and so far so good OMG I am loving LH1 over what we got out of the box!

You can also get the rogers and telus update through samsung-updates.com. ot will be a odin flash. I will do a modem cwm zip when i get home from work.
Sent from my SGH-I747M using XDA Premium HD app

dbzgod said:
I updated via the OTA, I try'd out Chainfires SuperSU Pro version which has a Root Keeper function to maintain root while updating on OTA, it did not work for our Canadian Models unfortunately but that is okay it is an experimental function anyways. At any rate I simpled flash CWM and push the SuperSU root app back onto my phone via CWM just fine to retain my root, and you can quickly and easily use chainfires Triangle away app to reset your flash counters.
Everything has worked fine for me. I am using the new LH1 firmware on my Bell phone and I am completed Rooted ^_^
For those less experianced and dont mind waiting for a root injected rom that is all good. For others you can take the steps I did and so far so good OMG I am loving LH1 over what we got out of the box!
Click to expand...
Click to collapse
Is there a way to restore stock recovery? I'm asking because I have a backup of my touchwiz rom (currently running cm10) and I want to restore to that to get the OTA

I'm on rogers and it says there's no update. I want a brightness slider! I've missed it from my crappy on aokp. But I get my computer back this week. Time to play again.
Sent from my SGH-I747M using Tapatalk 2

Yes there is, one way is to flash the stock rogers odin firmware. It can be found at samsung-updates.com. the stock software has the stock recovery
Sent from my SGH-I747M using XDA Premium HD app

This came up and disappeared when I went to update. Now its saying I have no updates available.

Related

[Solved] Unable to install OTA updates after rooting

Edit: Solved via flashing radio ROM in ODIN, see here: http://forum.xda-developers.com/showpost.php?p=31934326&postcount=22
I rooted my Sprint Galaxy Nexus using the Galaxy Nexus Toolkit 6.1. When the FD02 update came out, I couldn't install it OTA, but could install the radio and other updates in CWM recovery by downloading the files from here on XDA and installing them. Now that FG01 is out, I'm seeing the same problem of not being able to install OTA updates. I googled around and saw that one problem could be having CWM instead of the stock recovery, so I used the Galaxy Nexus Toolkit 6.1 to ReFlash Stock Recovery. I forced the OTA update through clearing/stopping Google Services Framework, and my phone rebooted and started to install, but halfway through I got the red exclamation mark screen.
What else do I need to do to be able to install OTA updates while rooted?
DanAdamKOF said:
I rooted my Sprint Galaxy Nexus using the Galaxy Nexus Toolkit 6.1. When the FD02 update came out, I couldn't install it OTA, but could install the radio and other updates in CWM recovery by downloading the files from here on XDA and installing them. Now that FG01 is out, I'm seeing the same problem of not being able to install OTA updates. I googled around and saw that one problem could be having CWM instead of the stock recovery, so I used the Galaxy Nexus Toolkit 6.1 to ReFlash Stock Recovery. I forced the OTA update through clearing/stopping Google Services Framework, and my phone rebooted and started to install, but halfway through I got the red exclamation mark screen.
What else do I need to do to be able to install OTA updates while rooted?
Click to expand...
Click to collapse
The radio, bootloader, and the ROM all has to be same model (or type). Try reflashing all the radio, bootloader and the image that is all yakju or takju
Sent from my Galaxy Nexus using xda app-developers app
I'm on the stock ROM, the FD02 radio from here, and I'm not sure what, if anything, is different about the bootloader, other than that it's unlocked now.
DanAdamKOF said:
I'm on the stock ROM, the FD02 radio from here, and I'm not sure what, if anything, is different about the bootloader, other than that it's unlocked now.
Click to expand...
Click to collapse
Um... what is the version of your Galaxy Nexus? Yakju or takju? Because mine is L03...
Sent from my Galaxy Nexus using xda app-developers app
DanAdamKOF said:
I'm on the stock ROM, the FD02 radio from here, and I'm not sure what, if anything, is different about the bootloader, other than that it's unlocked now.
Click to expand...
Click to collapse
OK never mind. L03 is the bootloader derp... but I still know if you are yakju or takju and then give me the bootloader and radio.
Sent from my Galaxy Nexus using xda app-developers app
You didn't need to revert to stock recovery. CWM will flash the OTA update just fine, you just have to tell it to. The OTA update will download as a zip file to /cache (or you can use the URLs posted over in the General forum to download the zip file yourself)... just boot into CWM and flash it. This also gives you a chance to also flash SuperSU before rebooting so you don't lose root (since the OTA update will unroot you).
This is how I install my OTA updates. I download the zip from URLs posted in this forum, boot to CWM and flash it, then flash SuperSU, reboot. Done. The bit about needing the correct bootloader and radio still applies, of course.
kyokeun1234 said:
OK never mind. L03 is the bootloader derp... but I still know if you are yakju or takju and then give me the bootloader and radio.
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
No. He's not running either of them, probably. He's on Sprint, which means his stock radios could be different from gsm yakju/takju (i believe sprint's model is lte/cdma? I may be wrong though..).
Sent from my i9250
bk201doesntexist said:
No. He's not running either of them, probably. He's on Sprint, which means his stock radios could be different from gsm yakju/takju (i believe sprint's model is lte/cdma? I may be wrong though..).
Sent from my i9250
Click to expand...
Click to collapse
I'm sorry, I've should've asked him about that. I am on mobile xda app, so I don't know whether he's on Sprint or not. My fault
Radio will be different from gsm.
Sent from my Galaxy Nexus using xda app-developers app
LOL. I said Sprint in the OP I think the Sprint Galaxy Nexus is called "Toro Plus" or "Toroplus" in this context.
Anyway, the problem I had before with CWM was that I could start the FD02 OTA update within CWM, and I'd get, as I recall, the red exclamation mark screen, instead of a successful install. I had the same issue when I tried the FG01 OTA update outright, it rebooted, went to CWM, and gave me a red exclamation mark. From searching around on google, it seemed that this was due to my current non-bone-stock setup (rooted/CWM recovery/unlocked/stock ROM), so is it actually unusual for this setup to not install OTA updates properly?
Thanks for the help so far, this is my first Android phone after a long line of WinCE/PPC/WM6 devices, and there's a lot that I'm unfamiliar with
Sent from my GT-I9100 using xda app-developers app
rooted = no effect on OTA updates (assuming you haven't messed around with anything in /system - if you have, all bets are off)
unlocked bootloader = no effect on OTA updates
CWM = will not install OTA updates automatically, but will install them manually by flashing the zip
stock ROM = required for OTA updates, and must be the build that the OTA update is meant for
radio = must be the version the OTA update expects
bootloader = must be the version the OTA update expects (actually not 100% sure on that, but it doesn't hurt...)
If everything is right and it still won't go, I'm not sure. Flashing with CWM might actually give you more of an error message indicating what's wrong. I think the stock recovery just gives you the exclamation mark and nothing more.
P
DanAdamKOF said:
LOL. I said Sprint in the OP I think the Sprint Galaxy Nexus is called "Toro Plus" or "Toroplus" in this context.
Anyway, the problem I had before with CWM was that I could start the FD02 OTA update within CWM, and I'd get, as I recall, the red exclamation mark screen, instead of a successful install. I had the same issue when I tried the FG01 OTA update outright, it rebooted, went to CWM, and gave me a red exclamation mark. From searching around on google, it seemed that this was due to my current non-bone-stock setup (rooted/CWM recovery/unlocked/stock ROM), so is it actually unusual for this setup to not install OTA updates properly?
Thanks for the help so far, this is my first Android phone after a long line of WinCE/PPC/WM6 devices, and there's a lot that I'm unfamiliar with
Click to expand...
Click to collapse
Yeah, I was unsure about toroplus being the sprint version.
Not sure whats going on, although i wouldn't think much about it and go full stock. Have you tried the updates thread on dev section? Have you tried TWRP?
Since i'm on maguro, i flashed yakju factory image, booted twrp with fastboot, flashed a supersu zip, reboot. Full stock achieved, with root. Nothing to it. Backup your root if you want with OTA root keeper or whatever people use (i would just repeat the first steps i mentioned after the ota installed, except reflash factory image, of course), then accept the ota.
Sent from my i9250
So you're saying, return the GNex to full stock, unlock and root again (perhaps using a different "toolkit" type utility, or just using adb commands), and see what happens? And I haven't visited any update threads other than when I installed the FD02 radio + other updates.
I'll ask the same thing I asked other dude with the same question, why?? Who wants an ICS OTA with borked search? For the love of all things butter, just flash JB!!
Seriously, should I have to explain myself? I want Sprint TV since I'm paying for it anyway. I want things to "just work" and not mess with JB ROMs using a hacked ICS radio. I don't want to put on ROMs with broken stuff in it (there's one ROM whose OP just says "Broken: you tell me." for crying out loud). I'm not going to argue this any further. Obviously if I wanted to put on a community ROM, I would just do so.
DanAdamKOF said:
Seriously, should I have to explain myself? I want Sprint TV since I'm paying for it anyway. I want things to "just work" and not mess with JB ROMs using a hacked ICS radio. I don't want to put on ROMs with broken stuff in it (there's one ROM whose OP just says "Broken: you tell me." for crying out loud). I'm not going to argue this any further. Obviously if I wanted to put on a community ROM, I would just do so.
Click to expand...
Click to collapse
I'm sorry if I came off confrontational, I was sincerely trying to help. I've been using JB ROMs since they were released and nothing is broken and I would never even consider going back to ICS now. But, of course, it's your phone and you'll do what you want with it.
DanAdamKOF said:
LOL. I said Sprint in the OP I think the Sprint Galaxy Nexus is called "Toro Plus" or "Toroplus" in this context.
Anyway, the problem I had before with CWM was that I could start the FD02 OTA update within CWM, and I'd get, as I recall, the red exclamation mark screen, instead of a successful install. I had the same issue when I tried the FG01 OTA update outright, it rebooted, went to CWM, and gave me a red exclamation mark. From searching around on google, it seemed that this was due to my current non-bone-stock setup (rooted/CWM recovery/unlocked/stock ROM), so is it actually unusual for this setup to not install OTA updates properly?
Click to expand...
Click to collapse
Rooting has nothing to do with it.
As was mentioned earlier, CWM will install an OTA update file but it will NOT install it over-the-air. What I mean is, if you download the update yourself ( from the "update" link in my signature), you can use CWM. If you get the notification that there is an OTA update and you click accept and try to have it install while CWM is installed , it will fail. See the difference?
Sent from my Galaxy Nexus using Tapatalk 2
I am so so sorry for this but I can't figure out how to take a screenshot in recovery mode.
When I install the OTA update in CWM (flashed it back), this happens:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is what happened last time with FD02, more or less.
DanAdamKOF said:
I am so so sorry for this but I can't figure out how to take a screenshot in recovery mode.
When I install the OTA update in CWM (flashed it back), this happens:
This is what happened last time with FD02, more or less.
Click to expand...
Click to collapse
You are getting that error because you are using a custom kernel. You need to be running the stock kernel for the build you are running.
Sent from my Galaxy Nexus using Tapatalk 2
efrant said:
You are getting that error because you are using a custom kernel. You need to be running the stock kernel for the build you are running.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
Thank you so much. That's news to me. How do I shove a stock kernel into it?

[Q] (question) rooting and stock rom

hi...
i am planning on rooting my SGN2 this weekend but i have some questions in my mind i wanna clear up first
1. if i root my SGN2 (JB 4.1.1), and still use stock rom, will i get OTA updates or will i need to unroot?
2. if i root my SGN2 (JB 4.1.1), and still use stock rom, will i lose any stock functions or will it just be the same as an UNROOTED SGN2?
3. are there any known issues of rooting SGN2 and stay on Stock rom?
4. if i root my SGN2 (JB 4.1.1), and still use stock rom, will there be any differences from my UNROOTED STOCK rom, from a ROOTED STOCK rom? what are they?
thanks guys, and more power..
hope to hear some replies
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
richard.ryan24 said:
hi...
i am planning on rooting my SGN2 this weekend but i have some questions in my mind i wanna clear up first
1. if i root my SGN2 (JB 4.1.1), and still use stock rom, will i get OTA updates or will i need to unroot?
2. f i root my SGN2 (JB 4.1.1), and still use stock rom, will i lose any stock functions or will it just be the same as an UNROOTED SGN2?
3. are there any known issues of rooting SGN2 and stay on Stock rom?
Click to expand...
Click to collapse
1. rooting will break OTA, sometimes unrooting with factory reset needs to get OTA, so i straight way like to say, don't expect OTA too simple if you want to root. and be prepared for flashing full ROM with Odin
2.You won't lose function but learning hub OR skyGo and some banking application known to stop working as long as you have rooted device.
3.Rooting voids warranty, and you have to unroot (as well reset counter,if you have it raised)before sending to service station.
follow up
dr.ketan said:
1. rooting will break OTA, sometimes unrooting with factory reset needs to get OTA, so i straight way like to say, don't expect OTA too simple if you want to root. and be prepared for flashing full ROM with Odin
2.You won't lose function but learning hub OR skyGo and some banking application known to stop working as long as you have rooted device.
3.Rooting voids warranty, and you have to unroot (as well reset counter,if you have it raised)before sending to service station.
Click to expand...
Click to collapse
thank you...
ok, so if i root my SGN2 (JB 4.1.1), then an update comes out for example, 4.1.2, i will have to
1. unroot, (which is no problem)
and 2. factory reset, which will cause me to lose all my data and back ups? which can be trouble some
am i understanding it right?
and what do you mean by "and be prepared for flashing full ROM with Odin" i wont get to keep stock rom?
Just use CF root,flash with Odin now you will be rooted on stock rom if you want to update to 4.1.2 just download the FW from sammobile,go ahead and flash it using Odin again now you will be no longer rooted. But before you flash the stock FW be sure to reset the counters(triangle away)
And yes a factory reset you will loose everything.you will not loose whats on your external memory card
Sent from my GT-N7100 using xda app-developers app
factory reset you will lose data but once you are rooted, there is lot option to backup, titanium is one of best.
"and be prepared for flashing full ROM with Odin" means in any case you won't get update, you can anytime download full ROM and flash it with odin. when OTA release, sametime you can also find full ROM for that update.
you will find most of answer here
http://forum.xda-developers.com/showthread.php?t=1896696
read first page of thread.
so basically...
dr.ketan said:
1. rooting will break OTA, sometimes unrooting with factory reset needs to get OTA, so i straight way like to say, don't expect OTA too simple if you want to root. and be prepared for flashing full ROM with Odin
2.You won't lose function but learning hub OR skyGo and some banking application known to stop working as long as you have rooted device.
3.Rooting voids warranty, and you have to unroot (as well reset counter,if you have it raised)before sending to service station.
Click to expand...
Click to collapse
dr.ketan said:
factory reset you will lose data but once you are rooted, there is lot option to backup, titanium is one of best.
"and be prepared for flashing full ROM with Odin" means in any case you won't get update, you can anytime download full ROM and flash it with odin. when OTA release, sametime you can also find full ROM for that update.
you will find most of answer here
http://forum.xda-developers.com/showthread.php?t=1896696
read first page of thread.
Click to expand...
Click to collapse
========================================================================================================
got it... thank you again...
so... if i was to root it, what method would you recommend me using? id would like to update it time to time using "odin" and i will just dowload the update from this site "http://samsung-updates.com/device/?id=GT-N7100" right? the XTC region. right?
btw, are you filipinos?
thank you
Hally79 said:
Just use CF root,flash with Odin now you will be rooted on stock rom if you want to update to 4.1.2 just download the FW from sammobile,go ahead and flash it using Odin again now you will be no longer rooted. But before you flash the stock FW be sure to reset the counters(triangle away)
And yes a factory reset you will loose everything.you will not loose whats on your external memory card
Sent from my GT-N7100 using xda app-developers app
Click to expand...
Click to collapse
========================================================================================================
got it... thank you again...
cf root? is that a way to root my note 2? where do i get it?
"if you want to update to 4.1.2 just download the FW from sammobile,go ahead and flash it using Odin again now you will be no longer rooted" - how do i root again? same steps? CF root?
"But before you flash the stock FW be sure to reset the counters(triangle away)" - why do i need to do this? i think my unit does not have warranty its from greenhills, it only has service waranty for 6months
thank you
richard.ryan24 said:
========================================================================================================
got it... thank you again...
so... if i was to root it, what method would you recommend me using? id would like to update it time to time using "odin" and i will just dowload the update from this site "http://samsung-updates.com/device/?id=GT-N7100" right? the XTC region. right?
btw, are you filipinos?
thank you
Click to expand...
Click to collapse
For your current version method 3 in thread i said you (post#2)
That even won't raise counter and you need not to use triangle away.
In future when you update to 4.1.2, method 3 won't work.
Just read said thread post #2 and 3 particularly and you will get answer of your most of questions
Sent from my GT-N7100 using xda premium
thank you dr ketan
dr.ketan said:
For your current version method 3 in thread i said you (post#2)
That even won't raise counter and you need not to use triangle away.
In future when you update to 4.1.2, method 3 won't work.
Just read said thread post #2 and 3 particularly and you will get answer of your most of questions
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
==========================================================================================================
just last question, (i will root later , cannot wait)
last question is...
after using "ExynosAbuse apk" to root like you said, what is next step to update Firmware to 4.1.2?
and for example, if v4.1.3 comes out, what method will i use to update again since i did not use odin to flash rom and u said "In future when you update to 4.1.2, method 3 won't work. "
thank you very much...
you are kind to reply and spend time with a noob like me...
a billion thanks to you...
You can unroot from exynos abuse and try to get ota
If fails try wiping data and most probably you should get ota, but remember i said most probably, i have seen case after wiping you may fail to get ota, in that case you will have only option to update is odin (you may try Kies too)
When new update will available most probably other methods should work(as of now other both method works till rom released today) , but when there is no 4.1.3,it is difficult to say, so stay tuned to thread I mentioned few post back.
Sent from my GT-N7100 using xda premium
dr.ketan said:
For your current version method 3 in thread i said you (post#2)
That even won't raise counter and you need not to use triangle away.
In future when you update to 4.1.2, method 3 won't work.
Just read said thread post #2 and 3 particularly and you will get answer of your most of questions
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
==========================================================================================================
if i use method 3... exynosabuse method
how do i back up my phone? i did not install cwm recovery here so i cannot have nandroid backup right? well how do i back it up if ever things get messed up..
what backup recovery do i have if i use method 3?
thanks...
If you want nandroid backup then you have to use method 2
Otherwise with just root, you can backup your data with titanium backup or other similar application.
Sent from my GT-N7100 using xda premium
rooted already...
dr.ketan said:
If you want nandroid backup then you have to use method 2
Otherwise with just root, you can backup your data with titanium backup or other similar application.
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
==========================================================================================================
i did method 2.. thank you so much....
I used mskip's toolkit and it worked well. I have the exact same initial settings as you had.
http://forum.xda-developers.com/showthread.php?t=1923956
Flash the latest stock rom should be dll7 or newer. Then use cfautoroot.
If an update comes out in future then do a factory reset and flash stock rom.
Sent from my GT-N7100 using xda app-developers app

just received OTA update to UCAMA4

I suspect it's the Exynos security fix, but I haven't tried to verify that.
Addendum: After it installed, the device status was Modified. But I restarted the phone again, and now the status is back to Normal. (It's always been fully stock, never rooted.)
which carrier?
kasdepwel said:
which carrier?
Click to expand...
Click to collapse
AT&T.
Just updated mine. 8.45 MB
Sent from my SAMSUNG-SGH-I317 using xda premium
Got mine too. My status was normal after update completed. Running stock ATT not rooted.
Anyone know what the update does?
Sent from the TermiNOTEr 2!
borijess said:
Anyone know what the update does?
Sent from the TermiNOTEr 2!
Click to expand...
Click to collapse
Its just a security update
nakizzzle805 said:
Its [sic] just a security update
Click to expand...
Click to collapse
That was my guess too, but I don't have any confirmation of that. Do you?
Addendum: AT&T says the update "includes a chipset security enhancement":
https://www.att.com/esupport/article.jsp?sid=KB418382#fbid=KorIN7eImNt
Just did the update.
I was rooted before - showing as modified.
Downloaded and installed fine.
Still rooted, still modified.
Sent from my Note ][
you are lucky; usually doing an ota update kills root
It removed the option #4 when doing the free sim unlock.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SAMSUNG-SGH-I317 using Tapatalk HD
The pic is after I used odin to put the original 4.1.1 rom back on. When it was ucama4, the #4 option was the rat.
Sent from my SAMSUNG-SGH-I317 using Tapatalk HD
htc.user said:
It removed the option #4 when doing the free sim unlock.
View attachment 1733104
Sent from my SAMSUNG-SGH-I317 using Tapatalk HD
Click to expand...
Click to collapse
bastards
livingaboard said:
bastards
Click to expand...
Click to collapse
So if you had done the option 4 free unlock is it not unlocked now?...noticed T-mo N2 didn't have that option the other day
Can you dump your kernel and radio plz
Someone. ..anyone.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
quarlow said:
Just did the update.
I was rooted before - showing as modified.
Downloaded and installed fine.
Still rooted, still modified.
Sent from my Note ][
Click to expand...
Click to collapse
How were u able to do that? I tried to do the ota update and my phone didn't update, but I'm still rooted (modified).
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Prob was rooted with stock recovery
Sent from my SAMSUNG-SGH-I317 using Tapatalk HD
i have not received update yet
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
lilmama2879 said:
How were u able to do that? I tried to do the ota update and my phone didn't update, but I'm still rooted (modified).
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
I was at one time running cleanrom. But, I bought a AllShare Cast Hub with my 50% coupon. I can only get that to work on stock. So, I went back to bone unrooted stock, took the OTA than granted multi view, then ran the auto root with Odin. Then I took the newer ota. It still says modified, and super su is still installed. When I open super su I didn't get any sort of error. So, I ASSumed I was still rooted.
But, when I dig deeper and tried to get root access I am not actually rooted anymore. I wonder why it says modified then. I expected to lose root, but I also expected it to remove super su.
The ota downloaded, rebooted, installed, with no hitch, when I was rooted. So, root doesn't prevent the ota from downloading. But, root was the only modification I made, nothing else, otherwise the AllShare cast doesn't work.
Sent from my Note ][
quarlow said:
I was at one time running cleanrom. But, I bought a AllShare Cast Hub with my 50% coupon. I can only get that to work on stock. So, I went back to bone unrooted stock, took the OTA than granted multi view, then ran the auto root with Odin. Then I took the newer ota. It still says modified, and super su is still installed. When I open super su I didn't get any sort of error. So, I ASSumed I was still rooted.
But, when I dig deeper and tried to get root access I am not actually rooted anymore. I wonder why it says modified then. I expected to lose root, but I also expected it to remove super su.
The ota downloaded, rebooted, installed, with no hitch, when I was rooted. So, root doesn't prevent the ota from downloading. But, root was the only modification I made, nothing else, otherwise the AllShare cast doesn't work.
Sent from my Note ][
Click to expand...
Click to collapse
I did a similar update with the LK7 OTA update. I was stock rooted with all status at normal and flash counter at zero. I installed Voodoo OTA RootKeeper (v2.0.3) and ran it to get a protected copy su binary. Then let the phone flash the OTA update and reboot. I too still had SuperuserSU and appeared to be rooted, but when I tried to launch Titanium it couldn't get permission. I had to open RootKeeper and re-apply the protecyed copy of root, then everything was fine.

[Q] How do I do an OTA update on a rooted Sprint Note 2 with TWRP?

I have TWRP recovery installed on my Note 2 (Sprint) and I saw the OTA Jelly Bean update is available. When I tried to install it, the phone restarts to TWRP without installing the update...
I have the stock rom installed with root. I am still a noob when it comes to rooting and all the details, so explain everything like I'm 5 please...
http://forum.xda-developers.com/showthread.php?t=2148604
Download the ma7 rom and flash it in your custom TWRP recovery just like a rom. This us tje rooted ota that u are trying to get. In order to get the ota u have to have stock recovery and u don't. You have TWRP. So tje easiest way to keep root is to flash the rom in tje link I posted for u
Sent from my SCH-I535 using xda premium
Master Thief-117 said:
I have TWRP recovery installed on my Note 2 (Sprint) and I saw the OTA Jelly Bean update is available. When I tried to install it, the phone restarts to TWRP without installing the update...
I have the stock rom installed with root. I am still a noob when it comes to rooting and all the details, so explain everything like I'm 5 please...
Click to expand...
Click to collapse
Yep, what he said.
Otherwise you gotta go all the way back. Its a hassle, it took me an hour cuz I did it right when it happened after the roms got loaded.
Sent from my SPH-L900 using Tapatalk 2
musclehead84 said:
http://forum.xda-developers.com/showthread.php?t=2148604
Download the ma7 rom and flash it in your custom TWRP recovery just like a rom. This us tje rooted ota that u are trying to get. In order to get the ota u have to have stock recovery and u don't. You have TWRP. So tje easiest way to keep root is to flash the rom in tje link I posted for u
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
Perfect...so I just dl the Stock L900VPAMA7 All-In-One Firmware one and then use TWRP to flash it?
I also feel like a bit of a noob...is this JB 4.2.1 or 4.1.2?
You have to go back to a stock UNROOTED rom. Without TWRP or anything.
Then you download the OTA update.
In in the stock recovery boot.
Then once the OTA update applies you can root and do whatever.
Sent from my SPH-L900 using xda premium
Master Thief-117 said:
Perfect...so I just dl the Stock L900VPAMA7 All-In-One Firmware one and then use TWRP to flash it?
I also feel like a bit of a noob...is this JB 4.2.1 or 4.1.2?
Click to expand...
Click to collapse
Correct. Just flash thru twrp recovery then flash an MA7 rom.
Sent from my SPH-L900 using xda app-developers app
musclehead84 said:
http://forum.xda-developers.com/showthread.php?t=2148604
Download the ma7 rom and flash it in your custom TWRP recovery just like a rom. This us tje rooted ota that u are trying to get. In order to get the ota u have to have stock recovery and u don't. You have TWRP. So tje easiest way to keep root is to flash the rom in tje link I posted for u
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
There are 6 links, what one do we download? I rooted using the tool kit, I did notthing else if this helps.
Thank you.
jaykull said:
There are 6 links, what one do we download? I rooted using the tool kit, I did notthing else if this helps.
Thank you.
Click to expand...
Click to collapse
Download the third one Down that says all in one firmware and flash in TWRP. That is the modem and other things for ma7. Then download either the first or second link depending on if u want odex or deodexed rom. If u don't want any themes then go odex. Then flash that in TWRP wiping cache and dalvik. Then u are on ma7.
Sent from my SCH-I535 using xda premium
devynbf said:
You have to go back to a stock UNROOTED rom. Without TWRP or anything.
Then you download the OTA update.
In in the stock recovery boot.
Then once the OTA update applies you can root and do whatever.
Sent from my SPH-L900 using xda premium
Click to expand...
Click to collapse
Exactly. Unless you install a rom that has the latest update built in the only way to take the actual ota from Sprint/Samsung is to unroot and install stock recovery. Before you unroot you need to make sure that your binary counter isn't more than one. If you don't know what that is then run the app "triangle away". If your counter is more than 2 you'll need to run it that many times till it's back to 1. After that you need to unroot preferably with something like supersu that can clean everything up before unrooting. Then you have to flash it back to stock recovery. There is a tutorial video in galaxynote2root.com. I had to do this to mine since I was just rooted with stock rom and didn't feel like installing a rom with the update already in it. Good luck
Sent from my Amazing Galaxy Note 2!
yankees45us said:
Exactly. Unless you install a rom that has the latest update built in the only way to take the actual ota from Sprint/Samsung is to unroot and install stock recovery. Before you unroot you need to make sure that your binary counter isn't more than one. If you don't know what that is then run the app "triangle away". If your counter is more than 2 you'll need to run it that many times till it's back to 1. After that you need to unroot preferably with something like supersu that can clean everything up before unrooting. Then you have to flash it back to stock recovery. There is a tutorial video in galaxynote2root.com. I had to do this to mine since I was just rooted with stock rom and didn't feel like installing a rom with the update already in it. Good luck
Sent from my Amazing Galaxy Note 2!
Click to expand...
Click to collapse
Is the modem in the all and one?
Stock L900VPAMA7 All-In-One Firmware: http://www.androidfilehost.com/?fid=9390288116658474979
md5: a7157e76198e89970529eb2ff385d86b
Stock L900VPAMA7 Modem: http://www.androidfilehost.com/?fid=9390288116658474573
md5: ceb5f9b4c1cbd383ae6caa522deb6290
I was thinking I would need to flash these in TWRP in this order:
1. Stock L900VPAMA7 All-In-One Firmware: http://www.androidfilehost.com/?fid=9390288116658474979
md5: a7157e76198e89970529eb2ff385d86b
2. Odex Version: http://www.androidfilehost.com/?fid=9390288116658475185
md5: 1a9a98254d2c7b87506c34e57c0a8982
Or custom ROM like SynergyRom http://forum.xda-developers.com/showthread.php?t=2090160
3. Stock L900VPAMA7 Modem: http://www.androidfilehost.com/?fid=9390288116658474573
md5: ceb5f9b4c1cbd383ae6caa522deb6290
----------
OTA
Just search xda for the modded OTA update files and then flash them through TWRP
This is so confusing. I have searched everywhere and the help on this is so limited. Can someone who successfully updated their note 2 to ma7 please do a walkthrough on how they did it. And please do it for us 5 year olds without acronyms and such.
Where do you find the modded ota update?
Sent from my SPH-L900 using xda app-developers app
Master Thief-117 said:
I have TWRP recovery installed on my Note 2 (Sprint) and I saw the OTA Jelly Bean update is available. When I tried to install it, the phone restarts to TWRP without installing the update...
I have the stock rom installed with root. I am still a noob when it comes to rooting and all the details, so explain everything like I'm 5 please...
Click to expand...
Click to collapse
Did you ever get updated? If so, what process did you go through?
musclehead84 said:
http://forum.xda-developers.com/showthread.php?t=2148604
Download the ma7 rom and flash it in your custom TWRP recovery just like a rom. This us tje rooted ota that u are trying to get. In order to get the ota u have to have stock recovery and u don't. You have TWRP. So tje easiest way to keep root is to flash the rom in tje link I posted for u
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
i did this just as suggested and while my baseband has changed to MA7, jellybean did not update from 4.1.1 to 4.1.2? see below:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
musclehead84 said:
Download the third one Down that says all in one firmware and flash in TWRP. That is the modem and other things for ma7. Then download either the first or second link depending on if u want odex or deodexed rom. If u don't want any themes then go odex. Then flash that in TWRP wiping cache and dalvik. Then u are on ma7.
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
I just wanted to say thanks. I had the same questions as the OP, and this (with the link posted earlier in this thread) was just what I needed.
Download the latest ota(rooted)
Sent from my Nexus 7 using xda app-developers app
blmvxer said:
Download the latest ota(rooted)
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
So you downloaded the latest OTA and it did not affect root ??
still getting ota notification
flashed the all-one , and the odexed ma7 rom, the phone shows that I am running 4.1.2 but I am still getting the ota notification that I have an update downloaded and ready to install.
Any ideas on what went wrong or how to stop the notification???
Don't quote me on this, but from what I have read, On a custom recovery it will fail when trying to install and never show you the notification message again for you to install again. Try and see, worst case scenario it will not install and no harm no fowl.
toyomerc said:
flashed the all-one , and the odexed ma7 rom, the phone shows that I am running 4.1.2 but I am still getting the ota notification that I have an update downloaded and ready to install.
Any ideas on what went wrong or how to stop the notification???
Click to expand...
Click to collapse

[Q] update stock 4.3 with clockworkmod

Hi Guys,
I am trying to update to 4.3 and installed team win recovery a long time ago. Running 4.1.2 now and when i do the update from settings --> about device --> software update when it restarts it just shows me the regular recovery screen. How do I make it continue with install, I dont care if I lose root etc. Or where can i download the stock recovery. Open to any suggestions but need 4.3 for knox at work, better than using a Blackberry......
plz dont kill me i did a lot of searching the only similar blog post is http://forum.xda-developers.com/showthread.php?t=2390127 but I can't find the zip online.
moddin said:
Hi Guys,
I am trying to update to 4.3 and installed team win recovery a long time ago. Running 4.1.2 now and when i do the update from settings --> about device --> software update when it restarts it just shows me the regular recovery screen. How do I make it continue with install, I dont care if I lose root etc. Or where can i download the stock recovery. Open to any suggestions but need 4.3 for knox at work, better than using a Blackberry......
plz dont kill me i did a lot of searching the only similar blog post is http://forum.xda-developers.com/showthread.php?t=2390127 but I can't find the zip online.
Click to expand...
Click to collapse
I think you should strat by reseting your phone to its original state and you can to this following the tread of the toolbox(i'm browsing woth tapatalk now so i will try to come back and post the link but it should be easy to find). You will use triangle away in the process.
Then update your phone trough samsung kies.
Voila complete stock 4.3 with knox
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Is there anyway to put the stock recovery tool back and doing the update without resetting the phone back to original state? I'm not exactly following what you mean by toolbox
Is there anyway to put the stock recovery tool back and doing the update without resetting the phone back to original state? I'm not exactly following what you mean by toolbox. I can't find stock recovery anywhere and i would rather just keep everything as is.
moddin said:
Is there anyway to put the stock recovery tool back and doing the update without resetting the phone back to original state? I'm not exactly following what you mean by toolbox. I can't find stock recovery anywhere and i would rather just keep everything as is.
Click to expand...
Click to collapse
I think you are looking for 4.1.2 stock recovery right???? Just making sure I understand, if I'm right I have what you need.
Hi, yes I just want to replace the clockwork recovery with the original Samsung recovery so I can upgrade to 4.3 over the air.
If that's what you are talking about please send a link.
They're are downloads for the t mobile Sprint ave Verizon variants but not AT&T...
Thanks
Sent from my SAMSUNG-SGH-I317 using Tapatalk
moddin said:
Hi, yes I just want to replace the clockwork recovery with the original Samsung recovery so I can upgrade to 4.3 over the air.
If that's what you are talking about please send a link.
They're are downloads for the t mobile Sprint ave Verizon variants but not AT&T...
Thanks
Sent from my SAMSUNG-SGH-I317 using Tapatalk
Click to expand...
Click to collapse
Here's the link to stock recovery for MH3
http://forum.xda-developers.com/showthread.php?t=2484338
This may interest you also.
Stock 4.3 without the bootloader lock down.
http://forum.xda-developers.com/showthread.php?t=2589891
You can update to 4.3 with a custom recovery, or flash it via ODIN.
Check it out before you do OTA.
dicksteele said:
Here's the link to stock recovery for MH3
http://forum.xda-developers.com/showthread.php?t=2484338
This may interest you also.
Stock 4.3 without the bootloader lock down.
http://forum.xda-developers.com/showthread.php?t=2589891
You can update to 4.3 with a custom recovery, or flash it via ODIN.
Check it out before you do OTA.
Click to expand...
Click to collapse
I flashed the recovery below and tried to do OTA but it fails at 25% of the update process... Am I missing something?
http://forum.xda-developers.com/showthread.php?t=2484338
CWM AT&T i317 UCAMH3 Stock *Recovery* Note 2
What 4.1.2 firmware version are you on and how did you get there? Have you made any mods? Removed system apps?
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I didn't remove anything first I thought I didn't have enough space on the root card but now I have 4 gigs left.
Sent from my SAMSUNG-SGH-I317 using Tapatalk
ahhh. You're in between LJ2 and MH3. I'll post mc3 recovery unless Zen beats me to it
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
Go for it.... I do have it if needed.. Otherwise, two files can be pushed to system to get the phone to do it for you ..
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
Zen Arcade said:
Go for it.... I do have it if needed.. Otherwise, two files can be pushed to system to get the phone to do it for you ..
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
You win. :laugh:
I just have the unzipped .img from Nunhuggers ATTI317UCAMC3RootedCWM.zip.
You talking adb push ??
Looks like I'm gonna learn something again !
I'll do anything you guys tell me to do I just dont know what you guys are saying lol. You can tell I have been very active since i had my Tytn II lol
moddin said:
I'll do anything you guys tell me to do I just dont know what you guys are saying lol. You can tell I have been very active since i had my Tytn II lol
Click to expand...
Click to collapse
Can you still get to TWRP ? team win recovery ?? ....
But I think Zen's plan will be better.....
Here's the cwm/twrp zip for ucamc3 recovery.... (attached)
Note that the OTA may still fail if it detects anything missing or different than what it expects. In that case, a wipe of /system, then a revert to MA4, may be needed.
You want me to go back to TWRP? I have the stock recovery right now.
moddin said:
You want me to go back to TWRP? I have the stock recovery right now.
Click to expand...
Click to collapse
The simplest path is to reflash TWRP, then flash the recovery I provided above, then see if the OTA will complete.
You might also be able to get the OTA to complete by running the openscript option from TWRP .. I know DS has had some success with that, but ymmv. If you try this option, you may get more information about where the OTA fails - take note of that and report back.
If that doesn't work then the next option would be to wipe /system and then odin flash UCAMA4. This should get you a clean OTA path to 4.3, and your data and apps should be preserved (although there is some risk). I recommend making backups beforehand in TiBu and then copy your SDCard contents to PC.
Thanks for you help will report back later. have to wait another 20 hours to dl the OTA update again.
You can turn off auto update of network time and set your time ahead 24 hours.
An alternative if ota doesn't work is to flash the stock rooted mk6 package - odin or cwm odex... DS provided a link earlier.
If Knox is a work requirement, you would need to decline SuperSU offers to disable Knox and you would need to run SuperSU and request full unroot.
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app

Categories

Resources