Related
i bought my phone on 9-21-12... how do i go back to complete stock and have that same firmware? i forgot to nandroid before flashing a rom and i want to go back. can someone give me a hand?
http://forum.xda-developers.com/showthread.php?t=1737859
Sent from my SPH-L710 using Tapatalk 2
My best guess is to unroot it.....that will go back to stock
Sent from my SPH-L710 using xda premium
im running a diff rom though
FLBoy1991 said:
im running a diff rom though
Click to expand...
Click to collapse
First reply is 100% correct.Second, not so much
Naddict said:
http://forum.xda-developers.com/showthread.php?t=1737859
Sent from my SPH-L710 using Tapatalk 2
Click to expand...
Click to collapse
Thanx bro I may have a few questions, is it ok to pm u???
Sent from my SPH-L710 using xda app-developers app
And once this thing is done down loading, do I flash it the way I would a normal Rom?? Through twrp???
Sent from my SPH-L710 using xda app-developers app
FLBoy1991 said:
And once this thing is done down loading, do I flash it the way I would a normal Rom?? Through twrp???
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
no, once u downlaod the odin file, thats just the first step, u still need to download the modem
best method ive found to be is to download the modem for ure smartphone and then odin back to stock, but before u do odin back to stock, i recommend getting the triangle away which removes ure custom count flash so then if u do return it back to the store they wont know. which is explained on the second post.
just follow the instructions which guy posted ontop with the link to odin back to stock, it shows u on the video how to return back to stock.
Practitioner said:
no, once u downlaod the odin file, thats just the first step, u still need to download the modem
best method ive found to be is to download the modem for ure smartphone and then odin back to stock, but before u do odin back to stock, i recommend getting the triangle away which removes ure custom count flash so then if u do return it back to the store they wont know. which is explained on the second post.
just follow the instructions which guy posted ontop with the link to odin back to stock, it shows u on the video how to return back to stock.
Click to expand...
Click to collapse
Ive actually simplified this and am in the process of uploading this file to the site. Full stock with LI3 OTA based on the one in the dev section, but will also flash: Stock Recovery, LI3 Modem, and no root access. System will show as normal as this is totally unmodified stock. The equivalent of the odin tar but updated and flashed without odin. Just flash in recovery like any rom https://dl.dropbox.com/s/sqns12krx5u0rr9/LI3_STOCK_COMPLETE.zip?dl=1
billard412 said:
Ive actually simplified this and am in the process of uploading this file to the site. Full stock with LI3 OTA based on the one in the dev section, but will also flash: Stock Recovery, LI3 Modem, and no root access. System will show as normal as this is totally unmodified stock. The equivalent of the odin tar but updated and flashed without odin. Just flash in recovery https://dl.dropbox.com/s/sqns12krx5u0rr9/LI3_STOCK_COMPLETE.zip?dl=1
Click to expand...
Click to collapse
well even better
http://www.youtube.com/watch?v=ypmqJbZqOaU&feature=youtube_gdata_player
How to unroot/unbrick thanks to QBKing77 for all the awesome videos.
Sent from Pluto.
Brand new and quick way to do it on this thread
http://forum.xda-developers.com/sho...Quick Return to COMPLETE UNROOTED STOCK (LI3)
Rooted Evo dead
Rooted Evo shift dead
Rooted Galaxy s3 alive and well!
Hi Guys need help bad. I hope I didnt screw my phone up.
I rooted my phone using the latest toolkit and installed twrp. Once i did that I backed up everything including efs on the external card.
Once i did that I flashed Jedi x rom but did not have much signal so decided to flash another rom which was liquid smooth. Once I flashed it again
my signal was almost non existent. I downloaded a canadian modem in the zip file and flashed it using twrp the same way i would flash a rom.
After i did that i wiped all the data and cache and the system. As I was rushing it siince its late at night i got a message saying that I am not rooted. I ignored it and rebooted the system and now its stuck on samsung logo. What can i do? Please help!!!!!
It appears that when I hold vol up plus home plus power I can get into download mode. I hope that helps.
Can someone give me some help how to get it back to life. I am pretty sure I have to use Odin at this point but dont know how
Ok i did some reading and I think the next step is to download stock image for the wind mobile turn on Odin and upload the image to the phone..
What settings should I use in Odin? What should be checked at the top and am I to use PDA only?
You can use odin or just reflash the ROM. You said tout wiped system after flashing the modern. That means you erased what ever ROM was on there. It's sticking at Samsung because there is no ROM to boot into.
Sent from my SGH-T889 using xda app-developers app
kintwofan said:
You can use odin or just reflash the ROM. You said tout wiped system after flashing the modern. That means you erased what ever ROM was on there. It's sticking at Samsung because there is no ROM to boot into.
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
Well I cant get into TWRP and dont know how to flash a ROM through ODIN? I am total newb at this.
Could you give me some pointers once I open up odin what do i need to do ? Thanks
Have you puked the battery. Put it back in then held volume+, home and power? Your recovery should still be there.
Also, odin is easy. Just open it and click the pda box and put your stock ROM there. Two things make sure you put your image in PDA and PDA ONLY and make sure it's your official stock Image
Sent from my SGH-T889 using xda app-developers app
kintwofan said:
Have you puked the battery. Put it back in then held volume+, home and power? Your recovery should still be there.
Also, odin is easy. Just open it and click the pda box and put your stock ROM there. Two things make sure you put your image in PDA and PDA ONLY and make sure it's your official stock Image
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
Yup went back to ODIN and flashed stock image and everything is now working great. I assume that I need to root the phone again before attempting to flash any roms again. I guess it was late at night and like you said I wiped the rom and there was nothing to boot into. I am an idiot!
Thanks for your quick help !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
vseslija said:
Yup went back to ODIN and flashed stock image and everything is now working great. I assume that I need to root the phone again before attempting to flash any roms again. I guess it was late at night and like you said I wiped the rom and there was nothing to boot into. I am an idiot!
Thanks for your quick help !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
Next time odin this http://forum.xda-developers.com/showthread.php?t=1975560 pre-rooted doesn't trip the counter,,,
deeznutz1977 said:
Next time odin this http://forum.xda-developers.com/showthread.php?t=1975560 pre-rooted doesn't trip the counter,,,
Click to expand...
Click to collapse
Ok so here's my next question.
In order to root again do i use the toolkit again or simply just download the pre-rooted rom and flash it with Odin? Which one would be better just
to get root again? Thanks!
vseslija said:
Ok so here's my next question.
In order to root again do i use the toolkit again or simply just download the pre-rooted rom and flash it with Odin? Which one would be better just
to get root again? Thanks!
Click to expand...
Click to collapse
Download the rom from the link i posted..flash in Odin Thats it pre rooted
deeznutz1977 said:
Download the rom from the link i posted..flash in Odin Thats it pre rooted
Click to expand...
Click to collapse
When I did this approach, I did it in two steps. I downloaded factory image of the firmware and flashed the device by using Odin 3.0.7.
Next, I used a tool package called "Galaxy Note2 ToolKit." Follow the instructions for how to root.
When I did the procedure, the software also had an option to include clockworkmod recovery
and busybox.
Gideon.
I'm pretty good when to comes to rooting, I just odin to stock and upgraded to
latest (MD5), but I didn't take into consideration that there's not a pre-rooted tar file out, I really hate to odin back to UVLC to root and then upgrade... anyone have any idea how to root it?
There's a rooted file already ..
Sent from my SGH-T999 using xda premium
re: root
Mr_Jay_jay said:
I'm pretty good when to comes to rooting, I just odin to stock and upgraded to
latest (MD5), but I didn't take into consideration that there's not a pre-rooted tar file out, I really hate to odin back to UVLC to root and then upgrade... anyone have any idea how to root it?
Click to expand...
Click to collapse
This new upgrade is pre-rooted.
No need to root it at all.
Here is the direct download link for the new Samsung Galaxy S3 T999 Official 4.1.2 stock rooted Jellybean rom:
- http://www.androidfilehost.com/?fid=22946563261203914
Just flash it using cwm or twrp like any other zipfile rom.
Good luck!
Misterjunky said:
This new upgrade is pre-rooted.
No need to root it at all.
Here is the direct download link for the new Samsung Galaxy S3 T999 Official 4.1.2 stock rooted Jellybean rom:
- http://www.androidfilehost.com/?fid=22946563261203914
Just flash it using cwm or twrp like any other zipfile rom.
Good luck!
Click to expand...
Click to collapse
That's the thing.. I'm pure stock.. I don't have a recovery, I tried to odin a recovery, but it wont stick since I'm not rooted...
re: sure way to root the first time.
Mr_Jay_jay said:
That's the thing.. I'm pure stock.. I don't have a recovery, I tried to odin a recovery, but it wont stick since I'm not rooted...
Click to expand...
Click to collapse
Here is a step by step guide:
Easy and sure way to root your phone - Here is s step by step guide:
After you have followed these instructions your phone will be in the same condition
as it was the day you have purchased it except with the benefit of being rooted.
Download the stock-rooted Samsung Galaxy S3 Jellybean v4.1.1 T999 firmware: http://www.androidfilehost.com/?fid=9390169635556426451
After downloading make a folder on your computer's desktop and unzip the
file using Winzip or 7zip so the .TAR file is in the new folder you just made.
Download and extract Odin into the same folder you made containing the TAR file
Here is the link for Odin: http://d-h.st/Q14
Download ODIN which is required for flashing the stock rooted firmware (a windows app)
Download the Odin Flash firmware for T999 Tmobile then copy it to the same folder as Odin
Run Odin by double clicking the Odin.exe within the same folder as the TAR file you extracted
Turn off your phone and boot into DOWNLOAD MODE (Volume Down + Home + Power Hold until phone powers up, then release and press Volume Up to enter Download Mode)
Once in Download Mode, connect the USB/Charger cable to the phone and plug into the USB port on your computer.
You should now see a COM** port listed toward the top-left of Odin (under ID:COM)
Click on the PDA button in the middle-right area of Odin.
Browse to and select the Firmware you downloaded (TAR file)
Make sure Auto-Reboot and F. Reset Time are the only options checked and that PDA is the only other thing checked.
TRIPLE CHECK your settings and that you have selected the correct firmware for your model phone and are using the correct options.
If you are using a laptop, make absolutely sure you are plugged in, or if on battery, that it is charged enough and will not go into sleep mode during flash.
Click Start to begin the flash. This will take a while, so be patient!
Once complete, in the top-left box in Odin, it will say PASS and the phone should have automatically rebooted.
You may unplug the phone and close Odin if you wish.
Wait at least 5-10 minutes for the system to boot the first time and then build its cache!
(It may seem to take a long time on first boot, this is normal so you must be very patient!!!)
Good Luck!
Misterjunky said:
This new upgrade is pre-rooted.
No need to root it at all.
Here is the direct download link for the new Samsung Galaxy S3 T999 Official 4.1.2 stock rooted Jellybean rom:
- http://www.androidfilehost.com/?fid=22946563261203914
Just flash it using cwm or twrp like any other zipfile rom.
Good luck!
Click to expand...
Click to collapse
Hello curious i used that file from that link but the update is good but the baseband version is still t999UVDLJC any idea how i can get onto the new baseband version. My build is new JZ054K.T999UVDMD5 but baseband is old still.
re: baseband
indnracn2 said:
Hello curious i used that file from that link but the update is good but the baseband version is still t999UVDLJC any idea how i can get onto the new baseband version. My build is new JZ054K.T999UVDMD5 but baseband is old still.
Click to expand...
Click to collapse
The reason is that Jody (the developer) removed the new RADIO/MODEM image
from the rom so everyone including those people who have AT&T Unlocked phones
can use the rom.
If you want the original baseband/modem/radio cwm/twrp flashable zipfile here
is the UVDMD5 Radio/Baseband Download Link - http://db.tt/RgrCGufl
Only flash this if you have a Samsung Galaxy S3 T999 device and you have Tmobile service.
You can root same way as all prevouse stock ROMs. Install custom recovery with Odin and then flash superuser in recovery.
Sent from my SGH-T999 using xda app-developers app
Except for one thing. After odin flashing recovery you cannot let the device restart. Everytime you boot up it checks for correct recovery and if its not there it rewrites it.
Sent from my SGH-T999 using xda premium
re: root
DocHoliday77 said:
Except for one thing. After odin flashing recovery you cannot let the device restart. Everytime you boot up it checks for correct recovery and if its not there it rewrites it.
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
That's one of the main reasons I always suggest NOT to odin flash the stock T999 4.1.2 tar rom
but instead flash the cwm/twrp T999 pre-rooted deoxidized 4.1.2 rom which Jody setup for us.
People should have been warned about what you said before they allowed the OTA update to
upgrade their phones unless they don't want root access and want their phone to be pure stock.
Misterjunky said:
That's one of the main reasons I always suggest NOT to odin flash the stock T999 4.1.2 tar rom
but instead flash the cwm/twrp T999 pre-rooted deoxidized 4.1.2 rom which Jody setup for us.
People should have been warned about what you said before they allowed the OTA update to
upgrade their phones unless they don't want root access and want their phone to be pure stock.
Click to expand...
Click to collapse
Its all been covered pretty thoroughly, and all folks need to do is read! I know its asking an awful lot for some.
I haven't looked at jovys but there are two files that cause the recovery rewrite, and if he didnt remove them his rom will do the same.
If I remember right they are:
Install-recovery.sh
Recovery-on-boot.p
The second is wrong im pretty sure, but its something similar. Check my firmware thread and it should be there.
Hope that helps.
Sent from my SGH-T999 using xda premium
Misterjunky said:
That's one of the main reasons I always suggest NOT to odin flash the stock T999 4.1.2 tar rom
but instead flash the cwm/twrp T999 pre-rooted deoxidized 4.1.2 rom which Jody setup for us.
People should have been warned about what you said before they allowed the OTA update to
upgrade their phones unless they don't want root access and want their phone to be pure stock.
Click to expand...
Click to collapse
Still need to Odin stock to get the updated bootloader/rpm/tz. Unless you want to flash them yourself. That's why everyone suggests root66.
re: root66
DocHoliday77 said:
Its all been covered pretty thoroughly, and all folks need to do is read! I know its asking an awful lot for some.
I haven't looked at jovys but there are two files that cause the recovery rewrite, and if he didnt remove them his rom will do the same.
If I remember right they are:
Install-recovery.sh
Recovery-on-boot.p
The second is wrong im pretty sure, but its something similar. Check my firmware thread and it should be there.
Hope that helps.
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
I was just looking in your "Firmware/OTAs T999(V) Official, Leaked & Root66 FW & OTA Updates" thread
and downloaded the "root66_TMO_T999UVDMD5.7z" which is the pre-rooted Odin flash 4.1.2 firmware.
The reason I downloaded it is that I just want to have a odin flash rooted backup of 4.1.2 in case I need it in the future.
I wanted to ask if this firmware includes the modem/radio in the TAR file?
If it does, what is the filename of the modem/radio file? (I need to remove it).
My phone is an Unlocked AT&T I747 Galaxy S3 which I am using with Tmobile service and
I do not want to flash the modem/radio since it will not work with my phone.
Thanks.
Misterjunky said:
I was just looking in your "Firmware/OTAs T999(V) Official, Leaked & Root66 FW & OTA Updates" thread
and downloaded the "root66_TMO_T999UVDMD5.7z" which is the pre-rooted Odin flash 4.1.2 firmware.
The reason I downloaded it is that I just want to have a odin flash rooted backup of 4.1.2 in case I need it in the future.
I wanted to ask if this firmware includes the modem/radio in the TAR file?
If it does, what is the filename of the modem/radio file? (I need to remove it).
My phone is an Unlocked AT&T I747 Galaxy S3 which I am using with Tmobile service and
I do not want to flash the modem/radio since it will not work with my phone.
Thanks.
Click to expand...
Click to collapse
Modem is NON-HLOS.bin. Can't remove it, because the md5 check will fail.
Maybe ask mrrobinson if he can give you any pointers on how to remove it correctly. The steps he uses to create root66 would likely work to remove the modem as well.
Do you have the same partition layout as us? If not, dont use any of the firmware. If so you can always flash it and then flash your correct radio after.
Sent from my SGH-T999 using xda premium
re: md5
Aerowinder said:
Modem is NON-HLOS.bin. Can't remove it, because the md5 check will fail.
Click to expand...
Click to collapse
What if I remove the .MD5 from the filename ?
I don't think that Odin requires the .MD5 extension, I know I have Odin flashed
roms a while back which did not have an MD5.
---------- Post added at 08:14 PM ---------- Previous post was at 08:07 PM ----------
DocHoliday77 said:
Maybe ask mrrobinson if he can give you any pointers on how to remove it correctly. The steps he uses to create root66 would likely work to remove the modem as well.
Do you have the same partition layout as us? If not, dont use any of the firmware. If so you can always flash it and then flash your correct radio after.
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
I am sure I have the same partition layout, I am using the cwm/twrp flashable zipfile of the pre-rooted UVDMD5 T999 4.1.2 rom.
Before I got the Unlocked AT&T Galaxy S3 I had the galaxy S2 which I used with AT&T network and flashed the
root66 Odin flash roms before and had no problems, but since I am with Tmobile now I need to remove the radio file.
Since I am with Tmobile now, I never odin flashed roms due to the fact that they all contain the radio file.
Mobile Odin will flash without the md5 extension. Cant remember for sure with pc odin. I may try it later tonight to see for sure. You can also deselect the modem when flashing via M.O. in case you didnt know, though
I am also pretty sure you have the same layout as the t999. I appreciate you taking the time to do it in a way that is safe and wont brick!
I do think you would be ok to flash the full fw though, just make sure you have a copy of the correct modem and flash it right after.
Ill let you know for sure about the md5 after I get home and try it out.
Sent from my SGH-T999 using xda premium
re: modem
DocHoliday77 said:
Mobile Odin will flash without the md5 extension. Cant remember for sure with pc odin. I may try it later tonight to see for sure. You can also deselect the modem when flashing via M.O. in case you didnt know, though
I am also pretty sure you have the same layout as the t999. I appreciate you taking the time to do it in a way that is safe and wont brick!
I do think you would be ok to flash the full fw though, just make sure you have a copy of the correct modem and flash it right after.
Ill let you know for sure about the md5 after I get home and try it out.
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Thanks, I just wanted to save a few steps and not have to flash the AT&T stock modem if I don't have to.
Hey man, didnt want to leave you hanging. Im not going to get to try odining without the md5 tonight. Definitely tomorrow though. Just has got too late too fast and my eyes are crossing from lack of sleep!
Ill get on everything by early afternoon for sure.
Sorry if ive kept you waiting on me for anything. But I haven't forgotten!
Sent from my SGH-T999 using xda premium
Okay maybe i can get a little help my phone is stuck in a boot loop and the onlything i can do is doin back to stock with a oneclick odin i have problem is its taking me from mk4 to ljc which is causing chamelon to crash and is making my serial read all 0's. Can someone point me in the right direction to a more current stock rom or one click to get my phone up and running?
kittyslasher said:
Okay maybe i can get a little help my phone is stuck in a boot loop and the onlything i can do is doin back to stock with a oneclick odin i have problem is its taking me from mk4 to ljc which is causing chamelon to crash and is making my serial read all 0's. Can someone point me in the right direction to a more current stock rom or one click to get my phone up and running?
Click to expand...
Click to collapse
If you need to back to stock then you can follow this guide: [http://forum.xda-developers.com/showthread.php?t=2086769
I can't flash anything. Is there anything to use odin?
kittyslasher said:
I can't flash anything. Is there anything to use odin?
Click to expand...
Click to collapse
you can use the odin billards .tar file to flash in odin. I was stuck as well and this really helped!
rosystreasures said:
you can use the odin billards .tar file to flash in odin. I was stuck as well and this really helped!
Click to expand...
Click to collapse
The http://forum.xda-developers.com/showthread.php?t=2086769 is it this one at the bottom? the odin flashable tar? if so where do flash it in the PDA section? sorry for all the questions :/ and does being on mk4 affect anything?
kittyslasher said:
The http://forum.xda-developers.com/showthread.php?t=2086769 is it this one at the bottom? the odin flashable tar? if so where do flash it in the PDA section? sorry for all the questions :/ and does being on mk4 affect anything?
Click to expand...
Click to collapse
No, the one in the middle that ends in .tar.
Flash in Odin in the PDA section. There are also instructions in the OP of the thread.
THis will bring you to stock 4.1.2. Then you can start over from there.
Being on MK4 now is fine.
Doing this at your on risk!! I m just providing the informaiton.
rosystreasures said:
No, the one in the middle that ends in .tar.
Flash in Odin in the PDA section. There are also instructions in the OP of the thread.
THis will bring you to stock 4.1.2. Then you can start over from there.
Being on MK4 now is fine.
Doing this at your on risk!! I m just providing the informaiton.
Click to expand...
Click to collapse
Yeah yeah i know haha and thats all im looking for is the right path thanks a lot
The instructions however are only for flashing the other stuff via recovery nothing to do with the Odin
How did it go?
Sent from my SPH-L900 using xda app-developers app
Hi as always I come for the expert advice to you guys. I have recently UPDATED my Galaxy S4 for Tmobile to CyanogenMod. Frankly I love the speed but it is still in beta version and has a few things I did not like. Few glitches. Anyway:
I want to go back to my stock firmware which was Kit Kat 4.2.2.before I installed Cyanogenmod.
I already downloaded Odin V3 09 and am ready to do this but I still do not have the stock firmware file. I looked for it but I really don't want to screw it up.
Can someone be so kind and insert the link to the download ? And if of course possible STEP BY STEP instructions on HOW TO GO BACK ?
I understand my phone now is rooted and will stay rooted after reinstalling Kit Kat. So I still should be able to get rid of all the bloatware correct ?
Any help greatly appreciated and huge THANKS IN ADVANCE !!!
Download firmware here http://www.cheatersedge.org/android/m919/M919UVUFNB4_M919TMBFNB4_TMB_FENNY_FIXED.zip, there is a thread already on instructions on how to flash.. and just because you rooted doesn't mean your device will stay rooted forever. Once you flash the firmware you will be unrooted but you can root again.. Alternatively you can just flash a debloated stock rom in recovery
Sent from my SGH-M919 using Tapatalk
emeres said:
Hi as always I come for the expert advice to you guys. I have recently UPDATED my Galaxy S4 for Tmobile to CyanogenMod. Frankly I love the speed but it is still in beta version and has a few things I did not like. Few glitches. Anyway:
I want to go back to my stock firmware which was Kit Kat 4.2.2.before I installed Cyanogenmod.
I already downloaded Odin V3 09 and am ready to do this but I still do not have the stock firmware file. I looked for it but I really don't want to screw it up.
Can someone be so kind and insert the link to the download ? And if of course possible STEP BY STEP instructions on HOW TO GO BACK ?
I understand my phone now is rooted and will stay rooted after reinstalling Kit Kat. So I still should be able to get rid of all the bloatware correct ?
Any help greatly appreciated and huge THANKS IN ADVANCE !!!
Click to expand...
Click to collapse
Finding the stock firmware won't be easy unless you try downloading from sammoble, but you could try Fenny's stock rooted 4.4.2 rom in development.
It's very smooth without the bloatware and it has unlimited tethering.
It works best with Philz recovery.
Just follow the directions and your good to go.
Don't forget to do a factory reset.
Pp.
Sent from my Touchwiz device that never forgets apps.
PIN lock screen does NOT work on Fenny's rom when you first boot/restart/power up the phone. So, if you are turning your phone on the lock screen will just be skipped over.
Pin lock issue could be NG if you need that type of security.
Pp.
Sent from my Touchwiz device that never forgets apps.
serio22 said:
Download firmware here http://www.cheatersedge.org/android/m919/M919UVUFNB4_M919TMBFNB4_TMB_FENNY_FIXED.zip, there is a thread already on instructions on how to flash.. and just because you rooted doesn't mean your device will stay rooted forever. Once you flash the firmware you will be unrooted but you can root again.. Alternatively you can just flash a debloated stock rom in recovery
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
Thank you so much Serio22, I just want to make sure it is the correct one for my Tmobile GS4.
And also would you be so kind and attach the STEP BY STEP instructions for Odin ? I am really afraid of bricking my phone. I need guidance.
People say once you do it few times it becomes easy as pie. But like I wrote above I don't want to mess up my phone.
emeres said:
Thank you so much Serio22, I just want to make sure it is the correct one for my Tmobile GS4.
And also would you be so kind and attach the STEP BY STEP instructions for Odin ? I am really afraid of bricking my phone. I need guidance.
People say once you do it few times it becomes easy as pie. But like I wrote above I don't want to mess up my phone.
Click to expand...
Click to collapse
There's instructions here, is for MDL but it's the exact same way for NB4 http://forum.xda-developers.com/showthread.php?t=2258628
Sent from my SGH-M919 using Tapatalk
serio22 said:
There's instructions here, is for MDL but it's the exact same way for NB4 http://forum.xda-developers.com/showthread.php?t=2258628
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
One last question and I won't bother again:
When it comes to those files " OFFICIAL TAR AND ORIGINAL TAR " do I just choose any one of them ?? I wanted to know the difference between them both. Instructions don't really specify which to choose. Or is it both ?
And also there is a suggestion to " Wipe the data in recovery " after the whole thing how do I do that ? Should I do that ?
Thank you again for your help.
emeres said:
One last question and I won't bother again:
When it comes to those files " OFFICIAL TAR AND ORIGINAL TAR " do I just choose any one of them ?? I wanted to know the difference between them both. Instructions don't really specify which to choose. Or is it both ?
And also there is a suggestion to " Wipe the data in recovery " after the whole thing how do I do that ? Should I do that ?
Thank you again for your help.
Click to expand...
Click to collapse
You don't have to worry about that, just use the tar file I posted earlier
Edit: and for the wipe data, you reboot to recovery after you flashed the firmware and do a factory reset.. Yes you should, but not necessary if you don't have any issues..
Sent from my SGH-M919 using Tapatalk
Thank you so much again, you were more than helpful :laugh:
serio22 said:
You don't have to worry about that, just use the tar file I posted earlier
Edit: and for the wipe data, you reboot to recovery after you flashed the firmware and do a factory reset.. Yes you should, but not necessary if you don't have any issues..
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
Sorry one more thing:
In the instructions Auto Reboot is checked. I have watched a few videos with the F. Reset Time also checked, should I check both in Odin ?
emeres said:
Sorry one more thing:
In the instructions Auto Reboot is checked. I have watched a few videos with the F. Reset Time also checked, should I check both in Odin ?
Click to expand...
Click to collapse
I don't think any of them are necessary, but you can check both of them if you want.. I always have F.Reset checked and reboot disabled because I like to reboot on my own but that's just me
Sent from my SGH-M919 using Tapatalk
serio22 said:
You don't have to worry about that, just use the tar file I posted earlier
Edit: and for the wipe data, you reboot to recovery after you flashed the firmware and do a factory reset.. Yes you should, but not necessary if you don't have any issues..
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
So I am back to stock it took me back to KitKat and now I am unrooted. I did not do the factory reset with Cyanogen so when I flashed the stock ROM I still had the cyanogen wallpaper. Some apps did not work so I did the factory reset and everything is flawless now.
Thank you for your help and the file you have provided. By the way was that the Jellybean of KitKat stock firmware ?
emeres said:
So I am back to stock it took me back to KitKat and now I am unrooted. I did not do the factory reset with Cyanogen so when I flashed the stock ROM I still had the cyanogen wallpaper. Some apps did not work so I did the factory reset and everything is flawless now.
Thank you for your help and the file you have provided. By the way was that the Jellybean of KitKat stock firmware ?
Click to expand...
Click to collapse
KitKat
Sent from my SGH-M919 using Tapatalk