Related
I have used CM7 on my Incredible for a while now and have had to constantly wipe and reinstall every week or so. When i install, the ROM runs perfectly, with all my apps working and everything. After a few days though, most of my apps force close whenever I open them. Namely, messaging, Gmail, and browser force close, along with my market installed apps.
This has happened to me many times now and I can't figure out how to fix this issue. I have changed different options when installing the ROM and tried Fix Permissions in Rom Manager and nothing fixes it .
My friend's phone as well as my dad's have had this same issue on CM7 as well. Any help would be greatly aprreciated!
bravesfan171 said:
I have used CM7 on my Incredible for a while now and have had to constantly wipe and reinstall every week or so. When i install, the ROM runs perfectly, with all my apps working and everything. After a few days though, most of my apps force close whenever I open them. Namely, messaging, Gmail, and browser force close, along with my market installed apps.
This has happened to me many times now and I can't figure out how to fix this issue. I have changed different options when installing the ROM and tried Fix Permissions in Rom Manager and nothing fixes it .
My friend's phone as well as my dad's have had this same issue on CM7 as well. Any help would be greatly aprreciated!
Click to expand...
Click to collapse
Any ideas?
Check and make sure your data/data partition isn't full. If it is, grab a cache cleaner from the market to free up some space.
This actually happened to me earlier tonight.
Had to reinstall to get through the night til I got back home, but I may need to go back to another ROM if this keeps up. Glad to know I'm not the only one though.
Smabbage said:
Check and make sure your data/data partition isn't full. If it is, grab a cache cleaner from the market to free up some space.
Click to expand...
Click to collapse
That's true, didn't think about that. Will I have to keep doing that more and more if i install more apps though?
This happens to me and all my friends phones with the cm7 final. They keep telling me its user error. We all have to clean wipe about once a week because of force closes. I finally switched it redemption rom
DROID Incredible
By the way i never had a single problem with the nightlies
DROID Incredible
06stang said:
By the way i never had a single problem with the nightlies
DROID Incredible
Click to expand...
Click to collapse
If what Smabbage said is true then hopefully that'd make sense. That way when you consistently install the nightlies, there is no way for the data partition to fill up all the way. Good to know. thanks!
I've been fighting this exact same problem. The only way I can keep it from happening is to do a full wipe and let the Android Market reinstall most of the apps. Then I can use titanium to bring back the missing apps and system settings.
Here's the things I've tried, with no success:
Wipe Cache / Wipe Dalvik Cache
Fix Permissions
Nandroid Backup then Restore (ok so I didn't expect that to do much)
Uninstalling apps, moving apps to SD (using the Android method, not Apps2SD)
Another interesting thing is that I run Watchdog, but instead of force closing, it pops up a message saying "Disk IO Error in Watchdog". That makes me wonder if some partition (Cache, data, I dunno) is out of space or worse, there are physical problems with the internal memory of my Incredible.
I have one question for everyone - How do I see how much space is available on each partition? I mean, I can go to the Android settings and see App Data storage left or SD card space left, but is there an app or tool I can see that will show me each partition with space left?
jjdoyle20 said:
Another interesting thing is that I run Watchdog, but instead of force closing, it pops up a message saying "Disk IO Error in Watchdog". That makes me wonder if some partition (Cache, data, I dunno) is out of space or worse, there are physical problems with the internal memory of my Incredible.
I have one question for everyone - How do I see how much space is available on each partition? I mean, I can go to the Android settings and see App Data storage left or SD card space left, but is there an app or tool I can see that will show me each partition with space left?
Click to expand...
Click to collapse
Had exactly same issue (even same Watchdog error) and Smabbage's answer was spot-on.
To check, open terminal emulator (gives you shell prompt) and do "df -k" - this will list all filesystems and, among other info, how full they are. My "/data/data" partition was full. Cleaned up some cache's and my phone is back in action.
Seems like a lot of games (and Netflix) fill the /data/data partition. Wonder if it is possible to make it larger at the expense of built in memory?
In any case, may be a good add-on to CM to monitor space in /data/data and give a reasonable warning when you close to running out.
I have been using CM7 for a while now and the apps that force close, are usually tied to the SD card. Try moving them to internal and see if it helps.
same here..
I use galnet miui (cm base)
after a few weeks, it shows 'disk io eror in watchdog'
and many programs fc.
never had this problem before.
someone can help me?
how can I fix this..
I know this is an old thread, but ive been searching around to see if other people have this problem.
i have found a temporary solution. open Root Explorer and go to /cache/dalvik-cache....use multi-select to select all items and then delete. reboot (IT WILL TAKE A WHILE TO REBOOT, IT IS REBUILDING, IT CAN TAKE UP TO 15MIN DONT PANIC) yes, this is in fact "wiping dalvik-cache" but ive gotten much better results doing it manually than through CWM.
this will calm your phone down at least for a few days with no force closes/service interruption, but you will have to do it again..........and again, and again. its better than having to do a full wipe though, obviously. hope this helps anyone who is still having this problem.
hi guys seem to be having issues with updating certain apps, some of the game apps have updated but maps wont update flash player wont also other apps.. they both come up downloading then says downloading failed.
ive tried doing the clear data and cache but still no luck.
im s off
pvt 3
custom mounted, ive even increased my mount to see if that was issue.
any ideas?
Try manual update, instead of auto update. My colleague had the same problem on a DHD, so he stopped the auto update and sucessfully updated manually.
tried that mate nothing,
seems it wont download any big apps either. i have a script to make market work but still dnt seem to work, it used to tho.
What Rom are you on? What Partition Table you use?
just standard sense but stripped down.
its set at 175 5
Your cache size is the problem -5MB is not enough.
YOu need to flash or enable market (script) to download to the SD - what and where you find it, depends on your ROM. Check the developement section.
I have a initd link cache to data script, worked fine now dnt seem to.
I've had an issue with a few manual updates where you only get a white screen after clicking on the update button and the agree/download screen doesn't load.
Anybody had anything similar?
Whatsthe contents of the script?
i must be doing something really stupid cos ii cant get it to work at all
Try removing both scripts (mine and yours) and reboot (you did reboot after applying mine right?) then see if you can download a small app
Hi,
First i will say thanks for the great rom, i will try it asap (a little bit more stable)
i read about this rom in the topic since it was started .
i have some Questions, it will be my first "clean" Android (without Sense)
There should be a installer after first start of the rom after flash? Where can i found more information about the things i can chose?
Evervolv toolbox, is that an addtional Settings Dialog with more Options or still a app which can be used as "standalone"
(sorry for the bad english)
When you install it you will get some options to choose a launcher and a2sd-script.
On first start you won't get the app to set your g-acc and so on, you'll have to do that in the system settings.
And the Evervolv-Toolbox are additional settings the this rom it's not a standalone app.
Hope this helps
grtz
Please note that Sandvold ICS v. 0.4.2.1 has some stability problems at the moment. Many people experience "black screen of death", device fails to turn on screen after a period of inactivity, battery has to be removed to reboot. I found that raising the minimum CPU speed from 245mhz to 384mhz completely removes this problem. With this small tweak the rom is great! You *should* be able to change this setting with Evervolv toolbox, sadly it does not work. For some reason the toolbox runs with insufficient rights to tweak cpu speed, I did my own scripts to set cpu speed from the console instead.
cheers
/Stig
stig_dk said:
Please note that Sandvold ICS v. 0.4.2.1 has some stability problems at the moment. Many people experience "black screen of death", device fails to turn on screen after a period of inactivity, battery has to be removed to reboot. I found that raising the minimum CPU speed from 245mhz to 384mhz completely removes this problem. With this small tweak the rom is great! You *should* be able to change this setting with Evervolv toolbox, sadly it does not work. For some reason the toolbox runs with insufficient rights to tweak cpu speed, I did my own scripts to set cpu speed from the console instead.
cheers
/Stig
Click to expand...
Click to collapse
Black-screen-issues can be solved by flashing MIUI-kernel:
http://www.miui-au.com/wp-content/plugins/download-monitor/download.php?id=166
Hi! I use ICS since beta 0.3.9 and I'm now updated to 0.4.4
This release seem very stable now. Just remember that the camera preview doesn't work. Also, you might have some problem with MMS.
App space problem
Hello - some help for a newbie please (well Desire newbie)...
I did try reading though Sandvolds thread, and I have tried to remedy, but I don't seem to get much further ....
I am running an ICS beta on my tablet, so I thought it would be interesting to try it on my Desire too. On the tablet there is more memory, so I have never experienced space problems with apps.
I rooted the Desire OK - and flashed 0.4.2.1 ... ran fairly smoothly, but hit space problems when trying to load up some of my favourite apps. I have a 16gb sd card. I downloaded apps2sd from the market - and moved some of the apps. However still not able to update some system apps from the market due to insufficient space (even though there appears to be enough).
Reading the other thread, I have gathered some/little understanding... and so before flashing 0.4.4 I reformatted my SD card from recovery choosing the largest ext4 that I could.
I was then ready to go to try 0.4.4.
On trying the Amarullz script and Nova launcher - I was having lots of lag after boot and I kept getting prompted to enter PIN number and reboot the phone. (I had done a factory wipe and cleared Dalvik after flashing the ROM).
I then reflashed choose Apex launcher, stock Kernal and data2sd option.
I wiped after flashing, did a few waits and reboots - as others recommended this.
Now seems to run quite smoothly, I have added back a bunch of apps via Titanium Backup ... but I don't see any apps 'automatically' being moved to sd card. I have moved as many as I can manually.
But I can also see that I am going to run out of space again soon ....
If I look in the settings at storage I see...
Internal storage - Apps 104MB Available 26.86MB
SD Card - Apps 239MB
Am I doing anything wrong?
Looloup said:
Hello - some help for a newbie please (well Desire newbie)...
I did try reading though Sandvolds thread, and I have tried to remedy, but I don't seem to get much further ....
I am running an ICS beta on my tablet, so I thought it would be interesting to try it on my Desire too. On the tablet there is more memory, so I have never experienced space problems with apps.
I rooted the Desire OK - and flashed 0.4.2.1 ... ran fairly smoothly, but hit space problems when trying to load up some of my favourite apps. I have a 16gb sd card. I downloaded apps2sd from the market - and moved some of the apps. However still not able to update some system apps from the market due to insufficient space (even though there appears to be enough).
Reading the other thread, I have gathered some/little understanding... and so before flashing 0.4.4 I reformatted my SD card from recovery choosing the largest ext4 that I could.
I was then ready to go to try 0.4.4.
On trying the Amarullz script and Nova launcher - I was having lots of lag after boot and I kept getting prompted to enter PIN number and reboot the phone. (I had done a factory wipe and cleared Dalvik after flashing the ROM).
I then reflashed choose Apex launcher, stock Kernal and data2sd option.
I wiped after flashing, did a few waits and reboots - as others recommended this.
Now seems to run quite smoothly, I have added back a bunch of apps via Titanium Backup ... but I don't see any apps 'automatically' being moved to sd card. I have moved as many as I can manually.
But I can also see that I am going to run out of space again soon ....
If I look in the settings at storage I see...
Internal storage - Apps 104MB Available 26.86MB
SD Card - Apps 239MB
Am I doing anything wrong?
Click to expand...
Click to collapse
1). www.revolutionary.io use this
2). www.alpharev.com download cm7r2.img
3). flash the hboot
Code:
fastboot flash hboot hboot.img
4). re-flash 4.4 and choose stock a2sd
5. enable a2sd
Code:
su
a2sd install
#choose settings#
Thanks for quick response..... I have a fee more questions....
I originally rooted my Desire via revolutionary .... do I need to do it again?
I guess I then flash the zip file.
The fastboot command - can I do this from the terminal app?
hi,
fastboot command and adb must be running from computer.
you need to instal sdk android sdk android
if you run revolutionary, u don t need to do once again but to flash an hboot you must be Soffed.
dunno if revolutionary does the job... i used alpharev to do son gain S-offed and able to flash hboot from fastboot command.
I saw the option to install agps in the installer but i chose gps. How can i add the agps when i already installed the rom? Because getting gps fix in navigation is taking way to long, so long that i abort it while trying
Getting closer
@bortak
1. Done OK
2. Done OK
3. Done OK
4. Done ... BUT ... no Gapps, no Terminal app ... not much really not even a keyboard (even after 2 reboots)
- The link to Gapps for CM7r2 no longer works
5. Unable to try this as no Terminal app ... and I can't get ADB working on my PC.
where have my apps gone?
So I can't get cm7r2 to work, so I reflashed hboot back to standard, I then reflashed 0.4.4 choosing stock a2sd. I installed a2sd via terminal and moved cache too. After reboot I installed a bunch of apps .... and eventually ran out of space - as if apps not being moved.
I then rebooted, and all of the apps except the paid apps have gone. I installed a couple of apps from the. Market and they have also gone after reboot.
I turned a2sd off, then I was able to keep apps over a reboot ..... but I would like to get a2sd working.
Any ideas?
For now I am manually moving apps to SD card.
Sorry for this question...
Your 3G, Wifi is working.. My wifi, 3G is not working..
3g (once APN set up) and wifi both working well
Looloup said:
@bortak
1. Done OK
2. Done OK
3. Done OK
4. Done ... BUT ... no Gapps, no Terminal app ... not much really not even a keyboard (even after 2 reboots)
- The link to Gapps for CM7r2 no longer works
5. Unable to try this as no Terminal app ... and I can't get ADB working on my PC.
Click to expand...
Click to collapse
Did you do a wipe after flashing the rom? I had a similar problem when doing that. CWM Recovery also deletes the sd-ext partition, and as on cm7r2 there are also system apps on sd-ext, they are gone.
With the included a2sd apps should be moved to sd-ext automatically. It is not shown on the phone.
How big is your ext4 partition? And did you create it with CWM Recovery? If so, try recreating with gPartEd.
muellersmattes said:
Did you do a wipe after flashing the rom? I had a similar problem when doing that. CWM Recovery also deletes the sd-ext partition, and as on cm7r2 there are also system apps on sd-ext, they are gone.
With the included a2sd apps should be moved to sd-ext automatically. It is not shown on the phone.
How big is your ext4 partition? And did you create it with CWM Recovery? If so, try recreating with gPartEd.
Click to expand...
Click to collapse
This.
10chars
I created the extra partition via CWM recovery - maybe too large as I made it 4gb.
I wiped the device and Dalvik cache after flashing the ROM.
I then set a2sd via terminal and allowed reboot.
I then downloaded apps (or restored via Titanium)
Eventually ran out of space when downloading apps - so they were not being moved.
Apps run OK.
When I did a normal reboot - the apps 'disappeared '.
Reading Bortaks debug guide the only thing I can see that looks relevant is to try reformatting the SC card with 2 primary partitions.
Read what i wrote? Do the following:
1) Recreate the partitions on your sdcard using GParted
2) Do a full wipe BEFORE flashing.
3) Re-flash the rom and select stock a2sd
4) Do NOT wipe again
4) Reboot, start Terminal emulator, set up a2sd
5) See if apps stay
On my first try I selected stock A2SD and set it up as explained using the terminal. (using a 2GB ext3 partition, placed after FAT32)
I rebooted and everything seemed fine, and I installed several apps. After a while, though, I got the "insufficient storage" error whenever I tried to install something. In the application manager the internal memory available had a large negative value.
I then wiped everything, reformated the 2GB ext3 partition to ext4, using "Minitool parition wizard" and reinstalled the Sandvold ICS ROM with Amarullz. Everything seems fine, and it shows 2GB internal memory. However, I've noticed that the ROM gets more unstable the more apps I install (it shows 500MB installed apps now, after removing around 50MB)...
Most of the time what happens is that system apps start crashing (Google Music, Dialler, Contacts, etc.) out of nowhere. After a while normal apps crash on execution as well. Google music is useless, as it crashes after a few songs and brings down the whole phone. Other music apps don't have this problem.
Am I doing anything wrong with the way I set up Amarullz? Should I retry stock A2SD with ext4?
I'm using stock HBOOT, Nova launcher and stock kernel.
Got there ..... but.....
After repartitioning my SD card for the third time ... I finally have this working.
Thanks to all for help/advice ..... but (isn't there always a but) ....
Downloads from the Market/Play are extremely slow maybe 5+ times the same apps took before .... I have tried on different WiFi connections - still the same.
Is this a consequence of the write speed of my SD card (it is only class 4) ... I did see a post in another thread where a class 4 wasn't recommended, but this was refuted by others using a class 4 card.
Otherwise all apps seem to be running OK, with no real loss of performance.
I guess once I have finally loaded up on all the apps I want, the Play updates will be more infrequent and less of an issue.
Hello,
I installed on my Desire with STOCK HBOOT Sandvold ICS in the Version 0.17.1.1. I choosed stock a2sd in the installation and active in terminal a2sd install. Then I restored my apps by Mybackup Root. I have now the problem if I want to install a app from the market I get the error message "No Disk space available" (or something like that, I'm using German language).
I have a 512mb ext4 partition and activate a2sd in Terminal. I searched the topic for problems like that and found that I have to install mount2sd. I did this, but it didn't help either.
What should I do now? I haven't enough posts to post in the sandvold ics topic.
Greets,
Burak
You should go back to GB...
Sent from my GT-P3100 using Flashes and Thunders
nlooooo said:
You should go back to GB...
Sent from my GT-P3100 using Flashes and Thunders
Click to expand...
Click to collapse
Why? No.
If you can live with slower perfomance, active the stock a2sd again with answers: y, y ,y
vBurak said:
Hello,
I installed on my Desire with STOCK HBOOT Sandvold ICS in the Version 0.17.1.1. I choosed stock a2sd in the installation and active in terminal a2sd install. Then I restored my apps by Mybackup Root. I have now the problem if I want to install a app from the market I get the error message "No Disk space available" (or something like that, I'm using German language).
I have a 512mb ext4 partition and activate a2sd in Terminal. I searched the topic for problems like that and found that I have to install mount2sd. I did this, but it didn't help either.
What should I do now? I haven't enough posts to post in the sandvold ics topic.
Greets,
Burak
Click to expand...
Click to collapse
I had exactly the same problem. At first I chose during flashing the option "Regular a2sdext" as it seems good to me. However, nothing has changed, it was not working for me at all. Then I reflashed again with "Stock a2sd" and after booting I went to terminal and activated it. I tried it with several combinations (in some of them I got the message "Insufficcient storage available" and I only had like 5 apps installed...). At the end I finally made it work with the combination that is recommended by Sandvold - Y N Y. After that I have been installing several apps and my internal memory does not go down almost at all :good:... I will see later, but for now, this is the best set up for me....
I had this problem
I had this problem with one application. When installing from market, there'd be a pop up message saying that there was no more storage space even though there was plenty.
A few hours later, everything went back to normal and I managed to install all the apps I wanted.
(Side question: have you guys updated to Sandvold ICS 0.18 Beta?! I have, but I lost root access, so now I'm trying to regain it. Could someone alert Sandvold? I'm a new member and I can't post to 'Android development forums")
CzarD said:
I had this problem with one application. When installing from market, there'd be a pop up message saying that there was no more storage space even though there was plenty.
A few hours later, everything went back to normal and I managed to install all the apps I wanted.
(Side question: have you guys updated to Sandvold ICS 0.18 Beta?! I have, but I lost root access, so now I'm trying to regain it. Could someone alert Sandvold? I'm a new member and I can't post to 'Android development forums")
Click to expand...
Click to collapse
what do you mean that you lost root access? I was planning to upgrade to 0.18 today (I flashed 0.17.1 yesterday, but I have an issue with my phone - I cannot recevie any phone calls - and I hope another flash might help it...), so I guess I will wait a while....
skubko said:
what do you mean that you lost root access? I was planning to upgrade to 0.18 today (I flashed 0.17.1 yesterday, but I have an issue with my phone - I cannot recevie any phone calls - and I hope another flash might help it...), so I guess I will wait a while....
Click to expand...
Click to collapse
I have been testing 0.18 for a few hours now. Your phone issues should be resolved except you will encounter a new issue. You will lose superuser privilliges, to restore this, you have to install a zip of superuser through recovery.
My comments on Sandvold ICS 0.18
skubko said:
what do you mean that you lost root access? I was planning to upgrade to 0.18 today (I flashed 0.17.1 yesterday, but I have an issue with my phone - I cannot recevie any phone calls - and I hope another flash might help it...), so I guess I will wait a while....
Click to expand...
Click to collapse
I had 0.17.1.1 and all was well, it was tiny bit laggy, but overall it was cool.
i updated to 0.18, and I lost root access: the apps requesting SuperUser premissions were denied. (If you don't know what root access is, please google it)
As iyf said, you can flash the zip provided in Sandvold's official thread to restore root access. Check page 1601 or so for the flashable zip that will restore root access. I did so, and regained root access.
Then I got back all my apps as Sandvold 0.18 is my daily driver. But as I was using it, I noticed that whenever you change something in the system settings, it does not apply immediately. For example, I want my phone to lock immediately when it goes to sleep, well it simply doesn't. The power menu lost a few of the shortcuts it had in 0.17.1.1 (sound profiles...) and even if you restored them in the system settings, it won't change.
All in all, 0.18 is great step in terms of stability and reactiveness. No more scroll lag, apps open seamlessly, and no more 3G signal problems. The camera still isn't working though. Nevertheless, bizarrely the system lost its coherence: the system settings are not immediately applied and used, and the screen just won't lock. Those are the problems I encountered this afternoon.
I hope Sandvold takes a look at this thread as I cannot post on the official ROM thread coz I just registered on XDA.
(My Home button died today, even if I press it really hard, it won't respond, but I think it's a hardware issue)
EDIT: About the no more space issue, I had this today even though there was plenty of space left. I rebooted the phone and the warning disappeared.
CzarD said:
I had 0.17.1.1 and all was well, it was tiny bit laggy, but overall it was cool.
i updated to 0.18, and I lost root access: the apps requesting SuperUser premissions were denied. (If you don't know what root access is, please google it)
As iyf said, you can flash the zip provided in Sandvold's official thread to restore root access. Check page 1601 or so for the flashable zip that will restore root access. I did so, and regained root access.
Then I got back all my apps as Sandvold 0.18 is my daily driver. But as I was using it, I noticed that whenever you change something in the system settings, it does not apply immediately. For example, I want my phone to lock immediately when it goes to sleep, well it simply doesn't. The power menu lost a few of the shortcuts it had in 0.17.1.1 (sound profiles...) and even if you restored them in the system settings, it won't change.
All in all, 0.18 is great step in terms of stability and reactiveness. No more scroll lag, apps open seamlessly, and no more 3G signal problems. The camera still isn't working though. Nevertheless, bizarrely the system lost its coherence: the system settings are not immediately applied and used, and the screen just won't lock. Those are the problems I encountered this afternoon.
I hope Sandvold takes a look at this thread as I cannot post on the official ROM thread coz I just registered on XDA.
(My Home button died today, even if I press it really hard, it won't respond, but I think it's a hardware issue)
EDIT: About the no more space issue, I had this today even though there was plenty of space left. I rebooted the phone and the warning disappeared.
Click to expand...
Click to collapse
of course I know what root is, otherwise I would not be here, right? ... I just did not understand what happened to you when you updated to 0.18.... Now I understand.... and regarding to your issues - in 0.17.1 I had exactly the same problem - my screen did not lock even I set it up correctly and I also had the problem with Home button, it simply did not work + I could not receive any phone calls... all of that was really annoying and I tried to find some help on sandvold's blog, without any success, I also tried their IRC, nobody helped me either. I did not want to do a full wipe again, but at the end I did (and now I have to set up everything as well ) but after full wipe, everything is working correclty... I can receive phone calls, my screen locks and home button is also working ... so I recommend you to do a full wipe, I am sure it will resolve your issues as well...
CzarD said:
I had this problem with one application. When installing from market, there'd be a pop up message saying that there was no more storage space even though there was plenty.
A few hours later, everything went back to normal and I managed to install all the apps I wanted.
(Side question: have you guys updated to Sandvold ICS 0.18 Beta?! I have, but I lost root access, so now I'm trying to regain it. Could someone alert Sandvold? I'm a new member and I can't post to 'Android development forums")
Click to expand...
Click to collapse
I also lost the root access with Beta 0.18(with full wipe),
(Beta 0.17 "root access" is OK!)
Superuser is out of order with this issue so that I can't activate A2SD
btw,
I have once tried the "AD2SDX", but didn't work normally:
I merged 1GB ext4 for it. And every time when I install about 10~15 Apps
A message on the top of the screen would tell me that I almost reached the limit.
(I'm using traditional Chinese, I don't know what it was written in English)
skubko said:
of course I know what root is, otherwise I would not be here, right? ... I just did not understand what happened to you when you updated to 0.18.... Now I understand.... and regarding to your issues - in 0.17.1 I had exactly the same problem - my screen did not lock even I set it up correctly and I also had the problem with Home button, it simply did not work + I could not receive any phone calls... all of that was really annoying and I tried to find some help on sandvold's blog, without any success, I also tried their IRC, nobody helped me either. I did not want to do a full wipe again, but at the end I did (and now I have to set up everything as well ) but after full wipe, everything is working correclty... I can receive phone calls, my screen locks and home button is also working ... so I recommend you to do a full wipe, I am sure it will resolve your issues as well...
Click to expand...
Click to collapse
By full wipe you mean:
1. wipe data/factory reset
2. wipe cache
3. wipe dalvik cache
4. wipe battery stats
right?
I always do that when I flash a new ROM... Anyway, will try again later and hope that it works.
Caesar
CzarD said:
By full wipe you mean:
1. wipe data/factory reset
2. wipe cache
3. wipe dalvik cache
4. wipe battery stats
right?
I always do that when I flash a new ROM... Anyway, will try again later and hope that it works.
Caesar
Click to expand...
Click to collapse
yes, it is what I meant... I did full wipe before flashing and then another after it ... I do not wipe battery stats during that process,but it does not matter I hope it will work for you...
UserMatty said:
I also lost the root access with Beta 0.18(with full wipe),
(Beta 0.17 "root access" is OK!)
Superuser is out of order with this issue so that I can't activate A2SD
btw,
I have once tried the "AD2SDX", but didn't work normally:
I merged 1GB ext4 for it. And every time when I install about 10~15 Apps
A message on the top of the screen would tell me that I almost reached the limit.
(I'm using traditional Chinese, I don't know what it was written in English)
Click to expand...
Click to collapse
Whenever I got this message, I'd reboot or hot reboot and it would disappear. I can't remember if I had the same script.
---------- Post added at 08:41 PM ---------- Previous post was at 08:36 PM ----------
skubko said:
yes, it is what I meant... I did full wipe before flashing and then another after it ... I do not wipe battery stats during that process,but it does not matter I hope it will work for you...
Click to expand...
Click to collapse
I did a full wipe again, and everything went back to perfect working order. Thanks man
CzarD said:
Whenever I got this message, I'd reboot or hot reboot and it would disappear. I can't remember if I had the same script.
---------- Post added at 08:41 PM ---------- Previous post was at 08:36 PM ----------
I did a full wipe again, and everything went back to perfect working order. Thanks man
Click to expand...
Click to collapse
you mean working with AD2SDX ?
Can I ask you how do you merge and format ext4 ?
Actually, I'm using MiniTool Partition Wizard, is it okay ?
cause I did reboot after I saw the message, but didn't work.
But I surely know that I can see "1GB" in "Apps" in "settings"
quite confusing
UserMatty said:
you mean working with AD2SDX ?
Can I ask you how do you merge and format ext4 ?
Actually, I'm using MiniTool Partition Wizard, is it okay ?
cause I did reboot after I saw the message, but didn't work.
But I surely know that I can see "1GB" in "Apps" in "settings"
quite confusing
Click to expand...
Click to collapse
It's not okay, minitool doesn't do that correctly. Use 4ext recovery to partition your sd card.
Sent from my HTC Desire using Flashes and Thunders
UserMatty said:
you mean working with AD2SDX ?
Can I ask you how do you merge and format ext4 ?
Actually, I'm using MiniTool Partition Wizard, is it okay ?
cause I did reboot after I saw the message, but didn't work.
But I surely know that I can see "1GB" in "Apps" in "settings"
quite confusing
Click to expand...
Click to collapse
Quite confusing indeed. I must say I'm no expert developer or programmer, heck I'm an engineering student. i just experiment on my Desire. But my experience in bricking/unbricking/flashing/etc tells me the following:
Minitool wizard apparently is not okay. I used it at first too but my Desire just could not read or detect the EXT3 partition I created. I tried EXT4. I tried different roms and scripts, none worked for me. (To be honest, I only tried 3 roms and a few scripts).
What I used is plain simple: Clockworkmod Recovery partitioning tools. It works for me!
First restore your SD card to full FAT32 configuration (I might suggest changing the basic storage unit from a few bytes to a few kilobytes as it might increase SD card responsiveness).
BACK IT UP, you will lose everything on it when you partition it in CWM.
Boot into recovery and select partition SD card (It is advised that the size of your partition does not exceed 1.5 GB as a few ROM developers have pointed out - not Sandvold though- I use 512 MB, which is more than enough for me). Set SWAP to 0 Bytes. (i have no idea what swap is, should google it, but most threads advise a swap of 0 B).
That's it, you have your partition.
I use CWM and Sandvold 0.18. If you use this setup, everything should be okay, at least it's ok on my phone.
I use stock a2sd when flashing Sandvold ICS ROMs.
I'm on stock HBOOT, S-OFF, and using the regular Kernel that comes with Sandvold 0.18. (I tried tiamat, but the battery dies after half a day of use!)
CzarD said:
Quite confusing indeed. I must say I'm no expert developer or programmer, heck I'm an engineering student. i just experiment on my Desire. But my experience in bricking/unbricking/flashing/etc tells me the following:
Minitool wizard apparently is not okay. I used it at first too but my Desire just could not read or detect the EXT3 partition I created. I tried EXT4. I tried different roms and scripts, none worked for me. (To be honest, I only tried 3 roms and a few scripts).
What I used is plain simple: Clockworkmod Recovery partitioning tools. It works for me!
First restore your SD card to full FAT32 configuration (I might suggest changing the basic storage unit from a few bytes to a few kilobytes as it might increase SD card responsiveness).
BACK IT UP, you will lose everything on it when you partition it in CWM.
Boot into recovery and select partition SD card (It is advised that the size of your partition does not exceed 1.5 GB as a few ROM developers have pointed out - not Sandvold though- I use 512 MB, which is more than enough for me). Set SWAP to 0 Bytes. (i have no idea what swap is, should google it, but most threads advise a swap of 0 B).
That's it, you have your partition.
I use CWM and Sandvold 0.18. If you use this setup, everything should be okay, at least it's ok on my phone.
I use stock a2sd when flashing Sandvold ICS ROMs.
I'm on stock HBOOT, S-OFF, and using the regular Kernel that comes with Sandvold 0.18. (I tried tiamat, but the battery dies after half a day of use!)
Click to expand...
Click to collapse
just to add - I have Amon RA Recovery and I partitioned my SD card by that, it was also working without any problems everytime I did it...
@CzarD - I am glad to hear that the wipe helped you...
You should try out the Amarullz or INT2SD from the Aroma installer. I have INT2SD and I have 1,3G of free space (2G EXT partition)
CzarD said:
Quite confusing indeed. I must say I'm no expert developer or programmer, heck I'm an engineering student. i just experiment on my Desire. But my experience in bricking/unbricking/flashing/etc tells me the following:
Minitool wizard apparently is not okay. I used it at first too but my Desire just could not read or detect the EXT3 partition I created. I tried EXT4. I tried different roms and scripts, none worked for me. (To be honest, I only tried 3 roms and a few scripts).
What I used is plain simple: Clockworkmod Recovery partitioning tools. It works for me!
First restore your SD card to full FAT32 configuration (I might suggest changing the basic storage unit from a few bytes to a few kilobytes as it might increase SD card responsiveness).
BACK IT UP, you will lose everything on it when you partition it in CWM.
Boot into recovery and select partition SD card (It is advised that the size of your partition does not exceed 1.5 GB as a few ROM developers have pointed out - not Sandvold though- I use 512 MB, which is more than enough for me). Set SWAP to 0 Bytes. (i have no idea what swap is, should google it, but most threads advise a swap of 0 B).
That's it, you have your partition.
I use CWM and Sandvold 0.18. If you use this setup, everything should be okay, at least it's ok on my phone.
I use stock a2sd when flashing Sandvold ICS ROMs.
I'm on stock HBOOT, S-OFF, and using the regular Kernel that comes with Sandvold 0.18. (I tried tiamat, but the battery dies after half a day of use!)
Click to expand...
Click to collapse
As I know, swap in linux is somewhat like virtual memory in Windows.
Will be launched when the system is in low memory.
That's exactly everything I know
I'm now Using Revolutionary CWM v4.0.1.4, stock HBOOT, S-OFF
And just follow your way to full wipe then install the system again(stock a2sd)
I still can't get the root access. thus, I can't activate a2sd in terminal
PS: with Beta 0.18
But Beta 0.17.1 currently work!
I am super-curious if & how anyone here is using Link2SD successfully with CM11 (on the Epic 4G, specifically).
I've tried scouring these forums, and the Internet in general, to figure out the best way to get this to work...
But everything that I've tried, it all seems to be working great, only up until the first time that the phone reboots, then it all goes to hell.
I am wondering if there are any extra steps to follow, specifically for the Epic 4G, or any particular pitfalls known to avoid?
That's why I wanted to ask here, specifically to Epic 4G users...
If you are getting Link2SD to work well with CM11, then please chime in here, and can you explain how you got it all set up and working well?
(I feel like this is the one last thing that if I could conquer it, then I could really continue to get a lot of life out of this phone... as it stands, it seems too risky to put much faith in Link2SD, because if the phone happens to spontaneously reboot while I'm out running around, then I'm screwed because so many apps just disappear, and then it's a pain to re-download, re-install, and re-setup each of them...)
Thanks in advance for any help,
AS
I am using Link2SD on my Epic 4G with CM11 with some success. I just did a reboot, and as usual lost any icons that had links created in Link2SD, so I go to the app locker & re-add them to my home screen. This is typical of what happens on a reboot for me. One thing I did notice is that it takes a minute or so for the deleted app icons to show up in the app locker again, so if you are reinstalling them, it may be a matter of waiting for them to show back up. Also on occasion(not this time), Link2SD will prompt me about a problem with the links and then prompt me to reinitiate the partition or something to that affect. Once I do that and it reboots, the app icons are still gone, so I just re-add them. Anyway, I know its not a perfect solution, but with this device its better than running out of RAM. One last thing, needless to say, I only create links for enough apps to free up enough RAM to keep my Epic working properly.
I've finally got a system going that seems to work for me, and so I thought I'd share some things.
I'm on CM11 (as of today, cm-11-20140602-NIGHTLY-epicmtd.zip) and I'm using Link2SD.
HERE'S A "GOTCHA" THAT HAD ME PULLING MY HAIR OUT FOR AT LEAST A DAY OR TWO:
Link2SD was having problems mounting the 2nd partition - it would just say "Mount script cannot be created." or something like that (not a very helpful error message), no matter how many times I rebooted and tried again. What I *finally* figured out (somehow), was that this error was being caused by /system being completely full. When I went and deleted a few things from /system (such as goofy wallpapers or that 'Apollo' app that I never use), then Link2SD was able to successfully create the script, and then I'd reboot and could use the 2nd partition successfully.
It's still a little aggravating that any reboot of the phone will cause all of my "Linked" apps to disappear - I've played with this until I am blue in the face, and have resigned myself to accepting that this is just "how it is" (?) - but I'm now using Titanium Backup as my workaround.
STEPS I TAKE WHEN THE PHONE REBOOTS:
1) Go into Link2Sd and make sure the 2nd partition is usable, otherwise recreate mount scripts (deleting wallpapers/Apollo if necessary)
2) Under Link2SD's "More" menu, perform the following:
a) Clean up the 2nd partition
b) Clean up the dalvik-cache
c) Clear all app caches
3) Restore apps from Titanium Backup
a) starting with Facebook app (the biggest hog) and then immediately go and make Facebook a "Linked" app again
b) restore a few more apps (to internal/phone), then go and shuffle those over to "Linked" apps via Link2SD
c) (repeat step 'b' until all apps are restored and "Linked" via Link2SD
^ This is the only way I've been able to get this to work for me... but now I can put about as many apps on the phone as I'll ever possibly need, and I have to say everything is running pretty smoothly now - but if anyone can see a better way, or how to improve what I'm doing, then I'm all ears... please let me (us) know.
Thanks!
Apex launcher doesn't lose the icons. I can free about 66MB of system space by swapping the launcher, deleting CM wallpapers, live wallpaper and Google keyboard.
I verified link2SD plus was not working properly but free link2SD works as advertised. For me, just installing the plus version will break the working functions of the free version. The free version scripts, links and launcher icons survive reboots. The plus version continually lost mount and wouldn't properly clean up the second partition and was not copying the lib files and placing them in the second partition.
Edit: per the developer's request, after verifying free link2SD was setup and surviving reboots, I added plus link2SD and rebooted: OK so far. Next I linked a file with plus version; OK until reboot. The application was not found except in directories. Dalvik cache cleanup finds the dex link and file in second partition as unneeded files. Had to manually delete all the files and links for the broken application and reinstall it. Also had to uninstall plus link2SD to properly link again. Sent the results back to developer.
Sent from my SPH-D700 using Tapatalk
Edit: 6/20/2014; link2SD 3.4.8 fixed the reboot issue for the link2SD Plus version for me. Sent email to developer to thank him for the fix.
See post #8.
Update on my last entry:
I emailed the link2SD developer and got a reply asking me to check the plus version again. In my reply back I linked him to this thread.
Another tip to add for nightly flashers that use link2SD and modify the zip prior to flashing: pull the mount script, 11link2SD, found at /system/etc/init.d and move it same location on zip before flashing. If retaining data, ie: dirty flashing; the mount securely retains your apps after flashing new nightly. Just checked with free version of link2SD: works.
Sent from my SPH-D700 using Tapatalk
Arson Smith said:
I am super-curious if & how anyone here is using Link2SD successfully with CM11 (on the Epic 4G, specifically).
I've tried scouring these forums, and the Internet in general, to figure out the best way to get this to work...
But everything that I've tried, it all seems to be working great, only up until the first time that the phone reboots, then it all goes to hell.
I am wondering if there are any extra steps to follow, specifically for the Epic 4G, or any particular pitfalls known to avoid?
That's why I wanted to ask here, specifically to Epic 4G users...
If you are getting Link2SD to work well with CM11, then please chime in here, and can you explain how you got it all set up and working well?
(I feel like this is the one last thing that if I could conquer it, then I could really continue to get a lot of life out of this phone... as it stands, it seems too risky to put much faith in Link2SD, because if the phone happens to spontaneously reboot while I'm out running around, then I'm screwed because so many apps just disappear, and then it's a pain to re-download, re-install, and re-setup each of them...)
Thanks in advance for any help,
AS
Click to expand...
Click to collapse
I'm using link2SD for all minus 16gb internal android device. Here is what i do in epic 4g, currently on CM11 20140523, use 20131209 gapps. I just write the part involved link2sd :
1. Buy atleast 16gb microSD and class 10 is a must, make 2nd partition (usually about 4gb - 6gb) as ext2 - ext4 (depends on the OS).
2. Device rooted, install titanium backup & root explorer 3.1.3 (make sure the root explorer working). Uninstall system apk (one of the launcher, whisper push, terminal emulator (I prefer use better terminal emulator, install as user app), CM filemanager, etc - still more that can be uninstalled for more space in system.
3. install link2SD, pick ext2 - ext4 (depends), dont restart yet. go to setting, uncheck everything then restart.
4. After back to launcher, open root explorer, go to root/data/, check app & dalvik-cache folder, press copy. Go to sdext2 folder, delete lost&found folder (usually there), and paste. So the app & dalvik-cache folder is there now (you could copy data/data folder too if you really want maximum extra space in internal, but in epic 4g i didn't copy data folder because it's enough space).
5. At the sdext2 folder, long press app folder, select "link to this folder", go to root/data/, press "create link" - "yes". Then go to sdext2 folder again, long press dalvik-cache folder, select "link to this folder", go to root/data/, press "create link" - "yes". Do the same if you copy data/data folder to sdext2 folder.
6. Reboot. Done. Then installing others app or restore with titanium backup.
I hope this is useful. Some Screenshot attached.
Hello
Thanks for that solution.
I`m searching for this solution since 1-2 weeks.
I had the same Problem on xcover 2 Link2SD.
Now it`s clear i have installt Link2SD and works perfect for just 3-4 days then i upgrade to Link2SD plus and then it happend like the Threat above.
I`m wondering that Lin2SD works perfectly on CM11 and if you go to Link2SD plus for money and this don`t work.
Free works perfectly and paid work not.
I have go back and everything its fine.
I hope the autor will fix the problem then i go back to plus.
Thank Thanks Thanks works fine!
regards marle.m
Good news! It appears the link2SD version 3.4.8 released today has a bug fix to survive reboots for linked apps when linking with link2SD plus version.
So far, I've only linked one app with plus version enabled and it survived one reboot. Then Ⓘ linked the data folder and rebooted again which also survived the reboot.
Looks like plus version is fully functional; I'll update if it fails some time later.
Sent from my SPH-D700 using Tapatalk
Finally had a chance to sit down and mess with this...
Yeah! Success! Freeing up space in /system worked.
Next question...Will I have to remove the bloat prior to flashing from now on? ie no more CyanDelta easy flashing
Anyone have any Scripting-Fu to come up with an automated method of stripping out said bloat?
thx sno
Snoshrk said:
Finally had a chance to sit down and mess with this...
Yeah! Success! Freeing up space in /system worked.
Next question...Will I have to remove the bloat prior to flashing from now on? ie no more CyanDelta easy flashing
Anyone have any Scripting-Fu to come up with an automated method of stripping out said bloat?
thx sno
Click to expand...
Click to collapse
I was thinking the gapps could be modified at the updater-script to remove some system bloat. Then remove some bloat from that as well. Most remove their own bloat choices so maybe a diy tut would be more useful?
I agree, the script would make the nightly flashing easier.
Sent from my SPH-D700 using Tapatalk
Just realized that if using Link2SD Plus to multi link all folders of an app to sdext2 after a clean install is still broken, if using intended method. Apps linked this way are missing after reboot.
Working on a safer suggested method that focuses more on removing apps from Gapps but also removing some other system apps after flashing a nightly that requires no modification of the nightly zip on a computer. Have to focus on linking only a minimum amount of apps with free Link2SD considered less risky to move, like larger stand alone apps, not needed tools.
I've got a working script and method that works but the risks to be avoided need to be detailed along with the tut to script and tool your own modified Gapps that minimizes the flash to flashing the nightly as-is and then flashing a custom Gapps that includes preferred launcher and restore methods.
Removing CMWallpapers, Apollo music and Trebuchet launcher. Substituting blacked out Google play. Replacing removed apps with Apex beta test launcher for test group, blacked out Pandora (these will be installed at /data partition where they can be easily uninstalled or updated) I use my own borrowed wallpaper.
Along with the removed bloat from Gapps, this frees a bit more than 40 MB of system space.
Sent from my SPH-D700 using Tapatalk
UPDATE: the latest version of Link2SD (3.5.2) has "fixed the bug that causes linked apps disappear on reboot when internal data is linked".
So... if you've also ponied up the buck or two for Link2SD Plus (as I have), then this finally works again like you'd always hoped it would.
I just loaded a bazillion apps back on the phone, and have been able to reboot multiple times without losing them.
The only time I "lost" them for a moment was after flashing to the latest CM11 nightly, but then doing the "Recreate mount scripts" and reboot brought them right back, with no other shenanigans necessary.
(Just wanted to let people know, because this is such a relief to me now....)
HURRAY!
OK I'm trying this again. Reboots are fine as long as I don't select quick or soft reboots; I lose mount, linked apps not installed.
Now need to try the clean install of nightly.
Snoshrk said:
Finally had a chance to sit down and mess with this...
Yeah! Success! Freeing up space in /system worked.
Next question...Will I have to remove the bloat prior to flashing from now on? ie no more CyanDelta easy flashing
Anyone have any Scripting-Fu to come up with an automated method of stripping out said bloat?
thx sno
Click to expand...
Click to collapse
One possible solution:
more scripts to limit steps
Another possible solution (click link)