Develop Bugs

80 G9 + USB Keyboard

Hi,
I'm trying to use a USB Keyboard with my Archos 80 G9.
First of all, I did the Softwareupdate ( 3.2.80 ) but no Keyboard or other USB Device (USB Stick, Mouse) worked. I'm Using the USB Port at the back ( the one for 3G Stick ).
So I flased the "old" Firmware (3.2.79). After this USB Sticks work fine. But still no Support for the Keyboard.
Did I did something wrong (3G is on)
Does it work with you guys? If yes what Firmware do you use?
Thanks a lot and best regards
Dagsta

Try using USB hub, it's possible that tablet doesn't use hardware that declares more power usage than USB port can give (all USB devices declare max current draw during the handshake)
tapatalked from Desire

the 3g usb working with dongle 3G and usn key only

You need an Micro-USB-B-OTG-Adapter.
Try www.adaptare-shop.de and search for OTG (or amazon etc.)
Sent from my ARCHOS 80G9 using XDA

Rear USB working with mac keyboard
Ok, so what gives? The rear usb works with a mac keyboard......I can even make a cheap leather cover/usb keyboard (ebay special) work IF I plug it into the Apple keyboard. Thoughts? Suggestions? I'm guessing there is something going on with the grounding on the Apple keyboard.

Have you tried turning the 3G stick on under Settings?
I believe that power to the back USB port is off until the 3G stick is turned on.
Don.

Will my tablet recognise my Sony Handycam? Can i upload videos to youtube from it?

Hey guys
So basically I have a Sony Handycam DCR-HC19E camcorder, and was wondering if i plugged it into my galaxy tab using the samsung usb adapter thing, will it recognise it and allow me to take and transfer files to and from the tab?
As i want to upload some videos to youtube but it wont work on my computer?
So im basically asking if anybody has got mass storage access to devices they have plugged into the tab 10.1
Thanks in advance for any help
Adam

I have a Sony dcr-sr100. It mounts to my galaxy tab 10.1 on stock firmware.
I have found that " high" powered USB devices are rejected by this tab, which is annoying. But i have found that how you connect the devices matter also.
E.g. if the adaptor is plugged in then i use my USB drive to the adapter is does not work.
If my USB drive is plugged into the adapter then into the tab it usually works, if not pull out and try again right away.
If you can get a powered USB hub, this will help for connecting more devices. Generic keyboard & mice work fine ( if not " high" powered)
USB mass storage otg app in the market will help to mount more drives at once and enable access to NTFS formatted drives which are not supported on the stock firmware.
Sent from my GT-P7510 using XDA

brb8two said:
I have a Sony dcr-sr100. It mounts to my galaxy tab 10.1 on stock firmware.
I have found that " high" powered USB devices are rejected by this tab, which is annoying. But i have found that how you connect the devices matter also.
E.g. if the adaptor is plugged in then i use my urban drive to the adapter is does not work.
If my USB drive is plugged into the adapter then into the tab it usually works, if not pull out and try again right away.
If you can get a powered USB hub, this will help for connecting more devices. Genetic keyboard & mice work fine ( if not " high" powered)
USB mass storage app in the market will help to mount more drives at once and enable access to NTFS formatted drives which are not supported on the stock firmware.
Sent from my GT-P7510 using XDA
Click to expand...
Click to collapse
Thanks for all this info!
So would u recommend getting a Samsung USB adapter thingy and them trying from their?
Sent from my GT-I9100 using xda premium

This is the one I got.
http://dx.com/p/106541?r=78454077
I don't see much point paying more than this.
Also the " card reader" versions are designed to only mount one card at a time since that is how the stock device handles otg. But if you already have USB card reader your happy with, it can be used with USB mass storage OTG app from the market. ( Which also adds NTFS support).
Sent from my GT-P7510 using XDA

Sprite cheers. I may just get a 3 pound one off Amazon, then see if it works
Sent from my GT-I9100 using xda premium

I got the corded version, as I thought it was more risky using the "Block" style one that might break the connector 30pin if it was knocked too hard.
There is rick of the corded version breaking on the cable, but it is a cheap replacement fix.
Sent from my GT-P7510 using XDA

i need to connect the high powered external 1 TB hard drive

yogeshmha said:
i need to connect the high powered external 1 TB hard drive
Click to expand...
Click to collapse
Ok, what information do you need?
You have made a statement but not asked a question. Answers to your statement have been covered above also.
Sent from my GT-P7510 using XDA

[Q] OTG cable enables USB Pendrive reading, but not keyboard / mouse operation

Hello.
I bought this USB OTG cable from Amazon :
http://www.amazon.fr/gp/product/B00646KVBW/ref=oh_details_o00_s00_i00.
With it, I can read USB pen drives content without any problem. It is detected as soon as I plug it and I can play MP3 files from the drive for example.
However, I'm unable to use any USB mouse / keyboard or gamepad (ICS is supposed to have added gamepad profile...), although i've seen many people doing it.
I'm using stock ICS 4.0.3 (unrooted, but that shouldn't be a problem...), I've tried to use USB Joystick Center to see if anything was detected, but no luck so far, although Videos show people even using a wireless XBOX360 controller with what seems the exact same configuration...
Did I miss something ? Is it possible that my cable only allows to use usb mass storage but nothing else ?
I hope someone has some experience to share...
Thanks in advance for your help and sorry if this has already been answered.
Myster-D

Bump ? Anyone ?
Do you think I should have the thread moved to the main Q&A forum ?
Thanks

The cable is fine the kernel isn't you will most likely have to change the phones kernel to enable a few other host otg options.

Thanks for your help.
Is there a way to enumerate the modules implemented in the kernel without rooting ?
I really thought stock kernel had the mouse / keyboard hid profiles...
Thanks again.
Sent from my GT-I9100 using xda app-developers app

USB OTG issues

I have a tmobile sgs3 with a stock rom (it was rooted, but latest update seems to have killed that), and after seeing the androidNZ connectivity demo I decided to play around with the usb otg. I am having some problems however. I have tried with 2 external hdds and a thumb drive and all three light up, but do nothing to the phone. I get no pop ups, and when I use astro to check the external usb drives, they all show up empty.
What am I missing?
Thank you!

I do not have that issue, but did you check USB debugging mode in Developer options?
I haven't tried to connect to an external HD, but USB Flash card works fine, as well as USB keyboard & mouse.

I've bought a $2 USB adapter for my phone and I have been able to mount a pendrive or a HD (when it is plugged to an external power source).
But when I try to connect a Mouse, Keyboard, Gamepad, etc., nothing happens. Not even an error message.
I'm using an official Android 4.03 rooted ROM (Claro Argentina).
Does anyone know what could be happening? The problem is my ROM (and it's drivers)? Is my USB otg adapter that is not compatible with mouse and keyboard?
I attach a screenshot of my system
img.tapatalk.com/bef728f6-6c26-6964.jpg
Thanks!
Sent from my GT-I9100 using xda app-developers app

Xperia S 4.1 Jellybean LiveDock + USB on the Go

Hi, since the new jellybean update i can't hook my keyboard and mouse to the xperia s. I've been using the live Dock for this. But it doesn't recognize any input.
Can somebody try it with a standard usb-on the go cable?

Livedock is working, but it seems Mouse and Keyboard Support was dropped with Jellybean.
I always used my logitech mouse and keyboard combo and my xperia s as a media center.

Dropped? Impossible
I will check later with my keyboard and mouse, but I still have the mouse/trackpad speed setting in the language & input menu after updating to JB
UPDATE: Yeah, both keyboard and mouse work in JB using a standard usb otg cable. Must be a LiveDock thing.

dark_skeleton said:
Dropped? Impossible
I will check later with my keyboard and mouse, but I still have the mouse/trackpad speed setting in the language & input menu after updating to JB
UPDATE: Yeah, both keyboard and mouse work in JB using a standard usb otg cable. Must be a LiveDock thing.
Click to expand...
Click to collapse
What mouse and keyboard do you have? I'm using a Logitech Unified Wirless Keyboard and Mouse which worked on ICS with Livedock.
Is there any other solution besides the soyn livedock, to use keyboard and mouse while simulatenously charge the phone?

solid0snake said:
What mouse and keyboard do you have? I'm using a Logitech Unified Wirless Keyboard and Mouse which worked on ICS with Livedock.
Is there any other solution besides the soyn livedock, to use keyboard and mouse while simulatenously charge the phone?
Click to expand...
Click to collapse
live dock not work for me either, not even the landscape mod is activated anymore(all setting are set on automatic rotation) , i didnt try to use keyboard or mouse..
does your xperia s go atleast in landscape mode when u plug the livedock??
for me
its now like charger and nothing else for me

solid0snake said:
What mouse and keyboard do you have? I'm using a Logitech Unified Wirless Keyboard and Mouse which worked on ICS with Livedock.
Click to expand...
Click to collapse
I have the Razer Orochi (both USB and bluetooth modes work with JB) and it has a virtual keyboard (for executing macros).

grgana said:
live dock not work for me either, not even the landscape mod is activated anymore(all setting are set on automatic rotation) , i didnt try to use keyboard or mouse..
does your xperia s go atleast in landscape mode when u plug the livedock??
for me
its now like charger and nothing else for me
Click to expand...
Click to collapse
Live dock isn't recognized by the phone since the ICS Update, but i can use it to charge the phone while using a usb stick. The Phone now only rotates to landscape when the hdmi calbe is connected.
But its u bummer that my USB Keyboard+Mouse doesn't work anymore.

Sony DK10 LiveDock™ multimedia station works just fine as I see it.
I have tested it on an XPERIA LT26i v4.1.2 with 6.2.B.0.200 ROM with DoomKernel v1 on the following devices:
Aten 4 port USB switch
SanDisk 32GB USB FAT32 flash drive
SDcard/USB card reader
Targus 7 port USB powered hub
Old Dell wireless keyboard
Logitech mouse(non-unifying)
USB non-powered hub.
WD 320GB HDD (FAT32) via Targus powered USB hub.
Canon USB printer
All the above work while powering the phone with one(only) storage device connected at any given time.
A lot of keyboards and mouse(s) may work too, including Logitech mouse(s)/keyboards... just not 2.4GHz Logitech Unifying receivers.
Logitech Unifying receivers and Sony 6.2.B.0.200 ROM do not seem to play well together at the moment.
There is a new firmware release 6.2.B.0.211 coming soon, so fingers crossed this improves things.
The reason I sound so hopeful is that the Logitech Unifying Receiver does show up as a connected device and it doesn't create an error in doing so.
@DooMLoRD did indicate he would look at what options are available to get the back and middle context menu buttons working again on mice, as they stopped working in ICS onwards. Respect, if he can pull that one off. :victory:

Could it be because you where using DoomKernel? I'm on locked Bootloader and Stock Jellybean. I don't have those Options like in your screenshot.

solid0snake said:
Could it be because you where using DoomKernel? I'm on locked Bootloader and Stock Jellybean. I don't have those Options like in your screenshot.
Click to expand...
Click to collapse
It is possible.
I know I checked my DK10 LiveDock using a leaked 6.2.B.0.197 ROM without any modified kernel and nothing worked with only an error.
I was testing my Unifying USB mouse at the time as I was hoping against all hope, it'd work and we'd have back and context buttons...alas, I was disappointed.
I seem to remember then, just plugging in a SanDisk 32GB flash drive directly into the DK10 LiveDock on it's one USB port as a sanity test and that worked on a leaked ROM(but I could be wrong).
So then I just ignored my DK10 LiveDock until the official Sony 6.2.B.0.200 ROM came out.
Under normal operation, my DK10 LiveDock is connected to an Aten 4-Port USB switch as the first hop which is then farmed out(when device selected) to over 15 USB 2.0 ports which only takes one port to have a NTFS storage device and the whole thing goes pear-shape.
As an aside @DooMLoRD has listed NTFS MicroUSB port support in his Kernel too.
So, before I installed DoomKernel v1.0 which was only minutes after I installed 6.2.B.0.200 I'd not isolated the DK10 LiveDock and done a controlled test.
I only did a controlled test after DoomKernel v1 was installed, that's why I have an eclectic list of devices which I have tested and seen to work with the DK10 LiveDock.
When I installed the next Sony 6.2.B.0.211 ROM I'll update this post with my finding on the DK10 LiveDock before I install DooMKernel as I too, would like to see the Logitech Unifying mouse/keyboard working.

Just tried using my mouse and keyboard with an otg adapter and yep it no longer works for me too. The phone doesnt even show an error it just does nothing

There is a huge list of growing bugs in this thread
http://forum.xda-developers.com/showthread.php?t=2303276
Lets add our problem to that..

Sony DK10 LiveDock™ multimedia station
As promised, I have installed Sony 6.2.B.0.211 with root access, BUT no DoomKernel at this time.
I have not even done the first reboot after installing
Sony 6.2.B.0.211 fw.
I am able to connect and use the Sony DK10 LiveDock™ multimedia station.
The DK10 LiveDock™ multimedia station also powers my phone.
The DK10 LiveDock™ multimedia station is working with the following devices I have tested.
Aten 4 port USB switch
SanDisk 32GB USB FAT32 flash drive
Targus 7 port USB powered hub
Logitech mouse(non-unifying)
USB non-powered hub.
Directly connected to the DK10 dock, is an Aten 4 port USB 2.0 switch (which is display as a connected device) which is then connected to a Targus 7 port USB 2.0 hub.
As a giggle, an additional 4 port USB 2.0 non-power hub is just plugged into the Targus 7 port hub with a 32GB flash drive attached and that works.
I also have two Dell 24" IPS monitors with USB ports which all work in this melee.
This gives a combination of over 16+ USB ports connected/daisy-chained off the Sony DK10 LiveDock™ multimedia station and they all seem to be available.
Logitech 2.4GHz Unifying Mouse/keyboard still does NOT work!!!!
The Logitech 2.4GHz adapter is still shown as connected AND there is no noted errors related to this adapter when plugged in or removed.
Summary
With or without DoomKernel provided by @DooMLoRD the DK10 works and powers the phone on an XPERIA LT26i using Sony 6.2.B.0.211 fw.
Logitech 2.4GHz wireless Unifying adapters for Mouse/Keyboard still don't work.

can't run corsair survivor 8gb on my sxs,show me''USB power consumption error''