Develop Bugs

ClockWorkMod for Sprint Galaxy Tabs

PREPARATION STEP! download sgs kernel flasher from the market (must be rooted I believe) and do a kernel backup as this process changes your kernel.
SPRINT TAB INSTRUCTIONS THAT WORKEDFOR MANY SPRINT TAB OWNERS. IT MAY NOT WORK FOR YOU!
Ok here it is, Thank koushs for this product, cruiserbax for his awesome instructions and Benjamin Dobell for giving up Heimdall flashing utility and install instructions.
I NOR THE ANYONE LIST ABOVE ARE RESPONSIBLE FOR THIS NOT WORKING!!! OR ANY DAMAGE IT MAY DO TO YOUR TAB!!
To get the zip file containing the zimage download it from here. http://www.megaupload.com/?d=SV6IKL1D
To flash the zimage you will need to use Heimdall which can be downloaded here. http://www.glassechidna.com.au/products/heimdall/ <--------click on the binaries link for 1.1.1
instruction are below.
Heimdall install instructions
1. Download Heimdall here http://www.glassechidna.com.au/products/heimdall/
2. Download Microsoft Visual C++ 2010 Redistributable Package (x86) and install it. http://www.microsoft.com/downloads/...5E-6DE6-4D3A-A423-37BF0912DB84&displaylang=en <------only if you are using Microsoft widows
2. Unzip Heimdall and you should have several files in the folder called Heimdall.exe, Heimdall-Frontend.exe, QtCore4.dll, QtGui4.dll, Readme.txt and drivers folder containing zadig.exe
3. Put you tab into Download mode(while the tab is OFF hold Volume Down + Power Button). Hook the tab up to you PC and Run Zadig.exe to install the drivers.
4. From the menu chose Options -> List All Devices.
5. From the USB Device list chose "Samsung USB Composite DEvice".
6. Press "Install Driver", click "Yes" to the prompt and if you receive
a message about being unable to verify the publisher of the driver
click "Install this driver software anyway".
7. Done. This only needs to be done once.
ClockWorkMod Install Instructions
1. First root you tab (use one click root or z4root) then downloaded rom manager.
2. Unzip the flash_image_VZW_zimage.zip. It will have have two files flash_image and zimage. you only need to use the zimage file. Open Heimdall-Frontend.exe and browse to where you unzipped the zimage to and select it. Make sure the box infront of zimage is checked. Hit start and it should flash the zimage and reboot the tab.
when it reboots it will get stuck at the samsung screen long hold the power button to shut it off. boot into recovery (cwm) power button plus volume up button it will start backing up to do the fs conversion but it will fail at /data and /cache. it will leave you in recovery.
3. While still in recovery select factory reset/data wipe when finished also do a cache wipe.
4. select reboot system, if you let it try to boot it will loop/hang on the SAMSUNG logo, this is not an issue just hold power key until it powers off.
5. while off hold volume up + power until you see the SAMSUNG logo then release both keys! NOTE: if step 4 does not fully power off and reboots just keep holding the power button until the screen blanks again then let go and quickly hold down only volume up + power until you see the SAMSUNG logo.
6. once it boots back into recovery (cwm) it will start the same backup/conversion process again, this time it will finish and leave you in recovery.
7. select reboot system and wait for it to load the tab back to froyo. (it will be back to factory defaults with the activation screen again)
8. Your tab will still be rooted so install terminal emulator and run "mount" to verify that your partitions are ext4.
9. Power off then boot back into recovery with volume up + power, it will boot back into recovery (cwm)
10. Do a backup and reboot your tab.
Source:
http://www.thegalaxytabforum.com/index.php?/topic/1775-clockworkmod-for-sprint-galaxy-tabs/

Yes, I tried this and it works great but be aware that certain kernels seem to mess it up.

Which Kernel Seems To Work The Best?
@ lloydcabraham
Which kernel is the most stable?

I rooted my tab last night in preparation for the HC port, and I'm curious about whether CWM is necessary... seems everything needs to be flashed via Heimdal or Odin, so is the advantage to having CWM installed just the wipe capabilities? I'm used to my EVO, and flashing/rooting/modding which is obviously different, I just don't understand what the differences are, I guess. THANKS SO MUCH FOR THE STEP BY STEP! Simpletons like me find them EXTREMELY useful!
Great work, and thanks again!
Sent from my PC36100 using XDA Premium App

I'll have to try this soon.

IP IHI II IL said:
I rooted my tab last night in preparation for the HC port, and I'm curious about whether CWM is necessary... seems everything needs to be flashed via Heimdal or Odin, so is the advantage to having CWM installed just the wipe capabilities? I'm used to my EVO, and flashing/rooting/modding which is obviously different, I just don't understand what the differences are, I guess. THANKS SO MUCH FOR THE STEP BY STEP! Simpletons like me find them EXTREMELY useful!
Great work, and thanks again!
Sent from my PC36100 using XDA Premium App
Click to expand...
Click to collapse
Somewhat Offtopic:
Chances are the honeycomb port will come to GSM Devices First, We can only hope that it comes to Sprint and Verizon devices.

I believe the build being worked on right now in here is based on a cdma device...

Not off topic at all. THE ONLY HC port is currently being built by spacemoose (reading more than one thread on one website helps) and that wasn't the focus of my question. Please read before you quote/insinuate. Don't wanna be tagged with the troll label...
cdguider said:
Somewhat Offtopic:
Chances are the honeycomb port will come to GSM Devices First, We can only hope that it comes to Sprint and Verizon devices.
Click to expand...
Click to collapse
Sent from my PC36100 using XDA Premium App

Clockworkmod has many advantages if you flash different roms, or say wanted to backup your current sprint rom & settings before testing Honeycomb Port.
As far as Honeycomb Port goes,
Again Chances are Honeycomb will port to Gsm Devices First,
Honeycomb is still Closed Code.
I said somewhat off topic, which it was, considering the thread is titled Clockworkmod.
Get your facts straight.

cdguider said:
@ lloydcabraham
Which kernel is the most stable?
Click to expand...
Click to collapse
I like Bauxite but you will get a flaky camera (Sometimes won't initialize without reboot) and seems to mess up CWM (Although redoing these steps fixes it) but I do love running @ 1.4 super stable!

cdguider said:
Clockworkmod has many advantages if you flash different roms, or say wanted to backup your current sprint rom & settings before testing Honeycomb Port.
As far as Honeycomb Port goes,
Again Chances are Honeycomb will port to Gsm Devices First,
Honeycomb is still Closed Code.
I said somewhat off topic, which it was, considering the thread is titled Clockworkmod.
Get your facts straight.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=11780452&postcount=1
3/26/11 #2:...Second... The "dirty" port will be for CDMA devices, but as soon as the CDMA version is released I'll look into getting a GSM version out asap. Shouldn't be hard. Instead of using my own kernel for this one, I'm using a modified version of Boushh's kernel and can probably hack together a suitable kernel for other devices as well. My own kernel for the larger project is still in fluctuation as I have to make changes to suit the build on a regular basis, but when I finalize that kernel I'll release it as an update and it will get a repo of it's own.
Click to expand...
Click to collapse

The quote was for what?

Re-read it one more time...

Really
I still stand by my message.
It's also apparent you didn't go back to page 1 otherwise you would have known I acknowledged spacemoose1 Honeycomb Port.
Despite someone working on Honeycomb port for Sprint / CDMA devices.
Chances are someone else is working on it for GSM, as with damn near anything, GSM devices will most likely get it first,
KEYWORD: most likely, and if you read the previous post - keyword is chances are
Bottom line is who cares who gets it first.
I'm well aware of most developments going on XDA

can u guys just drop it already!

Ok im stuck I followed steps but I am stuck at the samsung screen won't boot into recovery I don't know what I did wrong... I need help I have it stuck! (sigh) uSING hEIMDALL It isn't specific on which box I should use the zimage in which box using heimdall... I used it in the recovery under other made sure the box was checked. It ran through backups 2 times then looked like it was launching into recovery cwr 3.0 but when I picked it up it turned off when I turned on all I get is the samsung logo FOREVER... I have tried using heimdall again and tried to use it under FACTORYFS but same result. Please help. All I have now is a Huge Expensive Paper Weight. HELP
*** Ok after further review *SIGH* I understand I probably should have studied the damn thing better there is an option for zImage there... So how bad did I mess this thing up and is there a way to UnDue what I have Done?
Update-
So I was able to flash the Zimage and get to recovery but when I tried to wipe/data/cache and load K-lean rom I got this ---->http://img819.imageshack.us/img819/8655/imag0061y.jpg
I was also able to boot in but couldn't launch because every one of the launchers would fc.
I will attempt another ROM but I fear it is bricked.... I don't give up easily so any help would be awesome.
Thanks in advance.

Damn,
Can you boot into recovery at all? Ifa ll fails, put your Tablet in downloader mode, and flash the file below, follow the instructions in the zip file, if you have done some of the steps skip them, however read very carefully.
http://www.gsmelite.com/Sprint Galaxy Tab EA24 Flasher Odin.zip

cdguider said:
Damn,
Can you boot into recovery at all? Ifa ll fails, put your Tablet in downloader mode, and flash the file below, follow the instructions in the zip file, if you have done some of the steps skip them, however read very carefully.
http://www.gsmelite.com/Sprint Galaxy Tab EA24 Flasher Odin.zip
Click to expand...
Click to collapse
So I was able to flash the Zimage and get to recovery but when I tried to wipe/data/cache and load K-lean rom I got this ---->http://img819.imageshack.us/img819/8655/imag0061y.jpg
I was also able to boot in but couldn't launch because every one of the launchers would fc.
I will attempt another ROM but I fear it is bricked.... I don't give up easily so any help would be awesome.
Thanks in advance.
Thanks for the link... Will give it a try.

Really don't know what to say about the error message, My tab was messed up with errors like can't mount....., some other stuff, I had to send mine in to get replaced, never would go past the samsung logo. At the time the only thing Sprint users had was the Stock DJ30 With Modem.
Now we have no modem.
EA24 Stock
Ext 4
Honeycomb Port In Progress.

cdguider said:
Damn,
Can you boot into recovery at all? Ifa ll fails, put your Tablet in downloader mode, and flash the file below, follow the instructions in the zip file, if you have done some of the steps skip them, however read very carefully.
http://www.gsmelite.com/Sprint Galaxy Tab EA24 Flasher Odin.zip
Click to expand...
Click to collapse
Before I tried that I loaded the Honeycomb ROM well it isn't but the Khasmek's AOSP beta 1 and it worked everything working but the real question is what to do now... If I reboot does it load agian? Should I use Rom manager and run a recovery Backup? what would you advise?
****Update
So after getting everything setup I tried to do a boot to recovery through Rom Manager and low and behold back to dreaded SAMSUNG screen with NUTIN happening. Will try your steps next
****Update
After following steps and flashing image with odin... I was able to boot up fine... Downside---> My Verizon tab is now a Sprint Tab ... I need to find the .tar for VZW anyone? ANYONE? *SIGH*

CWM? Custom Kernel? Custom ROM? Samsung Admire

Is anyone working in any of these for the Samsung Admire?

I have used every method possible and I'm still unable to obtain root... Will admit that this is a quick phone and a definite step-up from the Optimus V...

VanillaTbone said:
I have used every method possible and I'm still unable to obtain root... Will admit that this is a quick phone and a definite step-up from the Optimus V...
Click to expand...
Click to collapse
Here, try this method. It has worked for other users as well as myself.
Note: I am not responsible for what happens to your phone.
Make sure that you have USB Debugging Enabled.

Bump
Same question, anyone working on the capability of flashing cwm or custom roms to the admire?

Is someone working on this by any chance? A few of us are looking to expand the Admire community.
DEVS PPPLLEEEEAAASSSEEEEEEEE!!!!!

yeah but the same dev that achieved root is trying to port it i would post the link but im still new

mpdasher said:
yeah but the same dev that achieved root is trying to port it i would post the link but im still new
Click to expand...
Click to collapse
PM me with the link. Or maybe the name of the site.
Thanks in advance.

on the admire-root-windows.zip i viewed the run.bat file in notepad. there's a line that needs to be changed.
open in notepad and change the line:
adb wait-for-defice
to
adb wait-for-device
the f should be a v lol. then file and save. it works.

actually just checked and even though the thing ran i haven't yet got it to work. i got a segmentation fault of the
adb shell "app_process /dev/null"
line and i dont this the superuser.apk installed right. when it loaded up the phone it asked me what to run it with. i had the option of: go launcher ex and launcher. neither worked. i read online just go to the market and find the app superuser. am trying that now.
---------- Post added at 03:14 AM ---------- Previous post was at 03:10 AM ----------
success!

help please
Somebody out there help us

Hi guys!
I'm interested in helping you guys with this device. I'm purchasing one soon.
Anyways:
has anyone tried unlocking the bootloader.
Download Fastboot and run.
fastboot oem unlock
any one?

so it looks like metropcs wont accept payments with credit cards outside the country. so i cant get the phone. sorry guys!

This would be awesome

rooting samsung admire/Vitality
youtube: watch?v=EEpU8-RBVHo
watch this video too root,,,very self explanatory
and to install clockworkmod:
How to put phone into download mode:
1) Unplug USB, remove battery
2) Re-insert battery
3) Hold down CAMERA button
4) Plug in USB
5) After 4 seconds you will see a screen with a warning about installing a custom OS, with an option to continue (VOL+) or cancel (VOL-).
__________________________________________________
__________________________________________________
Installing ClockworkMod:
Basic ODIN instructions:
1) open odin
2) put your phone into download mode and press Volume Up to continue.
3) connect the phone
4) ensure that you have a yellow com# box (see attached picture)
5) Select the ops file in the ops box (SCHR720.ops is in the zip with odin)
6) in the check boxes in the top left make sure one package and auto reboot are selected
7) in the bottom one package box select the desired tar (admire-cwm.tar that you downloaded)
8 ) click start! Your phone will reboot when finished and you can close out Odin.
Recovery mode for the Admire:
1) Turn phone off.
2) Press and hold Back, Volume Down, and Power keys.
3) Continue holding all three keys until device powers on and recovery menu appears.
Navigate using volume up/down keys, and Home key for enter.
Downloads:add the www before each link
unleashedprepaids.com/media/phones/Admire/admire-cwm.tar[/url]
unleashedprepaids.com/media/phones/Admire/Odin+OPS.zip[/url]

Admiral Beast in the ACSyndicate has delivered a ROM for the Samsung Admire (or Samsung Vitality if your a Cricket carrier) that works successfully for me.
forums[dot]acsyndicate[dot]net/showthread.php?5066-ROM-Admiral-Beast-CWM
Sorry for the above linklessness, forum won't let me post links just yet.

Thanks for the help with this phone... I did have a helluva time trying to find the proper driver for this phone.. I can't even imagine how many Samsung drivers are installed on my PC now with all these samsung phones I have rooted and ROM'ed.
Hopefully we will see someone port the Cynogenmod to this phone or finish what the one guy may or may not have started...
Thanks again!

Yes Please Help US

root of samsung admire.
marcos.lennis said:
Here, try this method. It has worked for other users as well as myself.
Note: I am not responsible for what happens to your phone.
Make sure that you have USB Debugging Enabled.
Click to expand...
Click to collapse
sometimes you might have to run the program 3x or more so just be patient.
you will also have to install the superuser.apk & the busybox.apk
before you will be able to verify you are rooted with root checker.

I am also looking at getting one of these phones in the near future (Vitality through Cricket).
I'll be sure to update this thread with any customizations/themes/ROMs I make in the coming months.
Cheers.

Just picked up this phone today.
Flashed my own root to it -- OK
flashed CWM -- OK
Packaged up system image and xferred to PC for decompile -- OK
I'll be working on a custom ROM for this phone soon enough.
I hear theres a beta CM7 floating around the net somwhere, but its spotty at best.
I'll be making a ROM similar to my OpenPDP/Zio flavors located in my sig.
Look for it.
~Cheers.

Root access and tethering but stock?

Hello,
I know nothing about rooting so I may be using the wrong terms. I've read a number of people are having issues with their phones after they've rooted or changed to rom or something. I've also read you can run stock(?) but be rooted (or something like that) so you won't have any issues.
Is there a way to give root access without really changing anything about your phone other than enabling tethering? I really only want to enabling tethering. Oh and the sonicwall client says the phone must be rooted or have root access or something before I can run it.

Yeah that can be done, but once you're rooted, you'll end up flashing roms lol
Sent from my SPH-D710 using xda premium

Instructions on how to get root with stock kernel here: http://forum.xda-developers.com/showthread.php?t=1273730
I followed the instructions to the tee and it worked perfectly. I have wifi tethering working now.

Thanks. If anyone has been flashing or rooting on Samsung Androids for a while, what do you think the chance is that I'll be able to do the over the air update for this phone when it comes out if I do root it?

boe said:
Thanks. If anyone has been flashing or rooting on Samsung Androids for a while. What do you think the chance is that I'll be able to do the over the air update for this phone when it comes out if I do root it?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=18038477&postcount=46
The other thread is long and convoluted, pm me if you need anymore details, but the original threads in development by ACS are quite clear and easy to follow.

nabbed said:
http://forum.xda-developers.com/showpost.php?p=18038477&postcount=46
The other thread is long and convoluted, pm me if you need anymore details, but the original threads in development by ACS are quite clear and easy to follow.
Click to expand...
Click to collapse
Thanks. I appreciate you taking the time to reply. To be honest I really don't know what you said though. I'm sure it is simple and obvious but I don't know squat about modifying my android phone so I'm not sure what you said really means.
Anyone know if there are any videos I can follow along to get to where I need to be. I think if someone tries to explain it to me in text I'll get lost and people will get frustrated with my lack of android knowledge.

boe said:
Thanks. I appreciate you taking the time to reply. To be honest I really don't know what you said though. I'm sure it is simple and obvious but I don't know squat about modifying my android phone so I'm not sure what you said really means.
Anyone know if there are any videos I can follow along to get to where I need to be. I think if someone tries to explain it to me in text I'll get lost and people will get frustrated with my lack of android knowledge.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1268037
http://forum.xda-developers.com/showthread.php?t=1273647
Here's what you will be doing:
1) Use "Odin" method to flash kernel+cwm recovery (.tar file) from your computer to the phone.
2) Use recovery to flash su.zip from the phone itself.
3) Same as 1 but stock kernel+recovery.
Here's how to do it:
1) Install Samsung Kies software on your computer. It installs usb drivers necessary to communicate to the phone.
2) Install odin software on your computer. Download .tar file for kernel+cwm.
3) Open odin, follow directions in the first thread to point to the .tar file you download from the same thread.
4) Shut down phone. Use key combination to reboot the phone into "download mode". Connect phone to computer with usb cable. Use odin on computer to commence flash of .tar file. Phone will reboot.
5) Download su.zip from the first thread. Place it on usb storage of the phone.
6) Shut down phone again. Hold down Volume Up and power buttons until you see orange menu. That's CWM recovery.
5) Choose install .zip from sdcard (it really installs from usb storage, not from sdcard). Choose select zip on sd card. Navigate to su.zip, confirm.
Then use the menus to go back and reboot the phone.
6) Download stock kernel+recovery from second thread. Start from step 3 above to flash the stock .tar file.
EDIT: Oh yeah, there's a video in the first thread. Not sure how useful it is though.
EDIT2: The video is old. It has conflicting information with the stuff in the first thread. Use it very cautiously, use the links to download from the first thread. You also don't need .pit file. Only .tar files.
EDIT3: these are the file links:
Kies: link
odin: http://forums.acsyndicate.net/ACS/Odin3 v1.85.zip
CWM+kernel .tar: http://forums.acsyndicate.net/ACS/acs-eb30-clockwork-epic-touch-4g-sep-20-4-00-pm.tar
su.zip: http://www.multiupload.com/TD3X6TM9O1
stock .tar: http://www.inspiringandroid.com/mirrors/devices/epic4gtouch/kernels/acs-eg30-stock-kernel-pulled.tar

Thanks! I'll give it a try.
I installed KIES it says "reconnect the device in Samsung Kies (PC Studio) mode. Current connection mode not supported by Kies. I'm not sure how to connect it in Samsung Kies mode.
Odin 1.85 shows it connected as ID0 (com5)
I only have auto reboot selected and the check for PDA as well as the acs-eb30 ewm file.
The phone says downloading but the first box in odin says fail.
Not sure if it is safe to reboot phone.

To answer a question you asked earlier, if you root and take an OTA update the chances are very good you'll lose root. If you're rooted and want to stay that way, wait until devs work with the update and come up with a "root-safe" version.
.....

boe said:
Thanks! I'll give it a try.
I installed KIES it says "reconnect the device in Samsung Kies (PC Studio) mode. Current connection mode not supported by Kies. I'm not sure how to connect it in Samsung Kies mode.
Odin 1.85 shows it connected as ID0 (com5)
I only have auto reboot selected and the check for PDA as well as the acs-eb30 ewm file.
The phone says downloading but the first box in odin says fail.
Not sure if it is safe to reboot phone.
Click to expand...
Click to collapse
You don't need to run kies to use Odin. Kies is only installed for usb drivers.
I'm not sure what would happen if you had both running at the same time.
If you want to use Kies later, you would need to uncheck USB Debugging on the phone in Settings/Applications/Development.
The phone says "downloading" regardless of whether it is flashing the kernel or not. Did you follow the instructions from the first thread?
4. Open Odin3 V1.85 and on the left side ONLY have AUTO reboot checked (VERY IMPORTANT)
6. Check the PDA slot and then press the PDA button and navigate to the Tar file and select it
7. Now power off your Epic Touch.
8. Once fully powered off, press and hold volume down, home key, and power button at the SAME time.*This will take you into Odin mode.
9. Plug your phone into your PC.
10. You should see COM# (the number doesn't matter) in the ID:COM box
11. Press start and let it run through the process!*
Click to expand...
Click to collapse
There's a step missing, but I suppose they didn't mention it since it's fairly obvious. I don't know if it matters...
The step is 8a) When you see odin prompt to continue, confirm to enter odin mode.
Also make sure that those .tar files downloaded correctly.

Thanks - you nailed it. If you have kies running you can't get odin to update the phone. My phone is all updated - ran all the steps.
Do I use a built in app on it for tethering or add an app?

boe said:
Thanks - you nailed it. If you have kies running you can't get odin to update the phone. My phone is all updated - ran all the steps.
Do I use a built in app on it for tethering or add an app?
Click to expand...
Click to collapse
I think you need Wifi Tether. Search for it, it's gonna be on code.google.com. I myself don't use it, but I heard it works pretty much out of the box w/o tweaking.

nabbed said:
I think you need Wifi Tether. Search for it, it's gonna be on code.google.com. I myself don't use it, but I heard it works pretty much out of the box w/o tweaking.
Click to expand...
Click to collapse
My sonicwall client works great with root access. I haven't been able to get the wifi tether to work yet. I can't find the device if I enable security. I can't seem to find the right BT drivers when my computer finds it via BT. If I disable security I can findi it via wifi but with our without acccess control disabled I can't actually complete the wifi connection.

Update - I did get it to connect via tether after all. I hadn't ever had an issue connecting to about 20 wireless networks with my laptop but I did notice a 5002 event churning away in the event viewer when I tried to connect. I updated my wireless drivers and I'm all set!
Thanks for all the help and patience!!!

[Q] galaxy note 8 factory restore

Hi guys. Im a noob, first post here and need some help. Be searching all day for how to load a stock rom to my device GT-N5110.
Heres the low down.
Purchased in Australia. No updates applied.
Success rooted with framaroot.Was running framaroot for more than a month
Install busy box today in normal mode I think. I chose the safe option.
Edited build.prop product model so I could install Navigon
Navigon working fine
Now..........
Unable to change the product name back using es explorer or file expert.
Thought it would change after restart but device entered bootloop. I think busybox was the culprit.
Discovered recovery mode and did factory data reset. Can acces odin screen on device too.
Device boots but hangs on language selection screen
I have found and downloaded stock rom for it that I found here somehow
I tried "Mrjraider" tutorial "how to flash back to a stock rom"
but odin crashes whenever I load the rom file and it wont recognize my GN8.0
Computer runs on windows 8. Kies is up to date too. Kies reconizes device but is unable to update or anything
Was running odin in win xp sp3 with administrator
can try on a win7 computer tomorrow.
This is the name of the file its about 1.2 Gb....... N5110UEDMD1_N5110XARDMD1_HOME.tar.md5 do I need to rename this or something
There was also a .dll that was in the package, wtf with that?????
be looking through this forum all day and night and cant quite find what im looking for. If what I seek is here please point me to it. Or if any one here in Brisbane, can fix it for me,What are your thoghts? PM me.
Just want my baby back working again.
Sorry, wrong section please delete mod

If I'm not mistaken, remove Kies, then try using Odin. Also, dll is a Windows file. I could be wrong about Kies, but I think I remember reading that it conflicts with Odin.
Sent from my SGH-T889 using Xparent Skyblue Tapatalk 2

Yesterday I installed same firmware in my computer runing win7 with Odin and Kies installed at the same time without problems. You don't need to rename the file, dll is a library for windows and needs to be on the same folder as the md5 file. Just remember to put the Note in download mode in order to get the firmware installed by Odin.

I have a thread in the development forum with the only file you need just flash in odin and done.
Sent from my GT-N5110 using Tapatalk 2

Tutorial is ok, problem seems to be elsewhere.
I have Windows 8 (x64) too, and Odin works i my case, i successfully flashed (and restored counter) N5110 before returning tablet to shop (it was exchange for N5100). Kill all Kies components via task manager, i have two more things in processes when i quit Kies. Next, try another version of Odin, but I remember one ROM from SamMobile, which crashed every Odin i had, so its may be this problem. Try another version of ROM - older, if exists. If crashes Odin too or not exists, try uninstall both Kies and Samsung USB driver, dowload toolkit from xda (http://forum.xda-developers.com/showthread.php?t=2251033) and install new driver via toolkit.
In rare cases may be problem in your computer, so try another one without installing Kies. I wish you luck.
Edit - That big file is ROM, dll is not needed for Odin. Run Odin, press PDA, select your rom. Turn tablet off, connect to comupter by original or hi-quality short cable, set tablet into download mode (hold vol- and home, press power on for 2 secs, select continue by pressing vol+). If all is ok, first field in Odin change color to yellow (i think), then press "Start".

Thanks to all. Let you know how I go. Odin 4.43 keeps crashing when loading the rom, on both my win8 laptop and fresh installed win 7 pc. Uninstalled everything from laptop except nero. Nothing installed on pc except modem drivers and Samsung drivers. I will redownload the rom. I think it may have become corrupt. Cheers
ok success. this is what I did. eventually got the rom to sit in odin without crashing it by simply renaming file by deleting the .tar.md5 extention. clicked off the file to save the rename. Right click on it again to rename and type the extension back in. Loaded it in odin and it worked. File name in odin showed up with duplicate file extention eg .tar.md5.tar.md5 but it worked. Odin 4.43 would not detect my device. Senior Moderator Mskip toolkit for Samsung galaxy note 8 would not detect my device .This was very frustrating
Used odin 3.07
loaded rom in pda. Found in janjannsen99 development thread.
connected device ,odin 3.07 detected it, unlike 4.43 for some reason.
clicked start.
Walla. Im a happy man.

This is the kind of story that are the most scary. Now I am kind afraid of root my note 8 or do anything unofficial.
Anyway, best wishes to you.

mickatron said:
Thanks to all. Let you know how I go. Odin 4.43 keeps crashing when loading the rom, on both my win8 laptop and fresh installed win 7 pc. Uninstalled everything from laptop except nero. Nothing installed on pc except modem drivers and Samsung drivers. I will redownload the rom. I think it may have become corrupt. Cheers
ok success. this is what I did. eventually got the rom to sit in odin without crashing it by simply renaming file by deleting the .tar.md5 extention. clicked off the file to save the rename. Right click on it again to rename and type the extension back in. Loaded it in odin and it worked. File name in odin showed up with duplicate file extention eg .tar.md5.tar.md5 but it worked. Odin 4.43 would not detect my device. Senior Moderator Mskip toolkit for Samsung galaxy note 8 would not detect my device .This was very frustrating
Used odin 3.07
loaded rom in pda. Found in janjannsen99 development thread.
connected device ,odin 3.07 detected it, unlike 4.43 for some reason.
clicked start.
Walla. Im a happy man.
Click to expand...
Click to collapse
That's what I use odin 3.07 . Don't use the other versions for some reason they don't work
Secondly guys when you download that file in my thread tO your computer it has to be extracted first you only Click PDA In ODIN and use the file you just extracted with the tar md5 extension. Thats it. That ss.dll file has no purpose its just there and you need not even bother with it.
Sent from my GT-N5110 using Tapatalk 2

I am also trying to restore my US-based Note 8.0 WIFI (still on 4.1.2), but couldn't figured out which ROM file I need to download.
Could you tell me the filename? I am using the Note 8.0 toolkit.

ROM
lanwarrior said:
I am also trying to restore my US-based Note 8.0 WIFI (still on 4.1.2), but couldn't figured out which ROM file I need to download.
Could you tell me the filename? I am using the Note 8.0 toolkit.
Click to expand...
Click to collapse
Will these two links help you:
Link 1
Link 2

AkiOrpheus said:
Will these two links help you:
Link 1
Link 2
Click to expand...
Click to collapse
I have checked that, but I don't see US Note 8.0. The search seems broken to, since United States is not shown in the list of country for Note 8.0

No one knows how to get the stock US based ROM?

lanwarrior said:
No one knows how to get the stock US based ROM?
Click to expand...
Click to collapse
@lanwarrior
U have to register on sammobile.com to download firmwares (stock ROM). Put the model as SGH-i467 and u will the file

AkiOrpheus said:
Will these two links help you:
Click to expand...
Click to collapse
people keep posting to go to sammobile but every time i look there isn't a rom labeled for the US, and they dont give an explanation of what rom would be the equivilant or even if any of them would be. Should I use UK version? is it the same as the US?
I'm having the same exact issue as OP and I can get into download mode and i have odin 3.07 but i am just looking for the exact rom to load and cant find an exact answer so far. I've already messed up my tablet enough today so I don't want to flash the wrong rom and make things worse lol.
K
O
F
ps I looked for janjansen's thread in development and did not see it, am I missing something? anyone got a link?

ok I did some more reading around the web and found that a lot of people used the UK version as I kinda suspected. Would have been nice to get confirmation on that but its cool, I flashed it, no problem, and now I'm setting up the chainfire root and getting back all my apps. So all in all it took a few days but I'm back on my feet *sigh of relief*
K
O
F

SPH-L520 NJ1 update question

I have obtained a Sprint s4 mini. From what I can find, the current kernel is SE secure enforcing.
The exact build number is KOT49H.L520_4.4.2_0016
Build date is Oct 7 2014
I am not new here, I know that all known root methods are now bust. What other options are there?
Searching seems to be pretty difficult for this device. All searches for bootloader and recovery come up for the i9190 / i9195
If I use Kies or Odin to flash a previous recovery image, will that brick the device? Also in the settings, it says Secure Boot Status - Type: Samsung
Guess that is referring to the Knox enforcing
The particular image I had in mind to flash with Odin is SPR-L520VPUAMK2-20131115204826
Will it work? Or am I screwed?

Well no one was able to answer my question, so I had to figure it out on my own. Hopefully the following information will be of help to someone else without spending 36+ hours digging through the internet for answers.
You CAN fix your phone it you are on the NJ1 kernel. This is NOT a guide to fixing a bricked phone, although it may fix that too.
If you are on the NJ1 kernel, there are no root methods currently available. You MUST be on NE3 or lower. I also attempted to flash the custom recovery through Odin, but after a reboot it was as if I did nothing. No Knox flag, no warranty trip, no custom recovery.
Here is what I did to get custom recovery and root:
READ THIS BEFORE ATTEMPTING STEP 1.
This is only for the Sprint variant of the S4 Mini. Model number SPH-L520
Your Warranty could be voided. Proceed if you like. (More info on steps 5 and 6)
I had a horrible time getting the downloads from Sammobile. You WILL have to create an account and login to download files. I could not find any working links for the firmware below except for this site. Register a user name and password, DO NOT UNCHECK THE BOX that says receive emails from Sammobile OR YOU WILL NOT GET YOUR REGISTRATION EMAIL. On the Register page it is at the bottom. After you register, check your email and click on the link to complete the registration.
Close all your windows that are open to sammobile.
You are going to want to download Internet Download Manager in order to download files from Sammobile. After many many attempts to download the firmware from Sammobile, all tries failed. YOU ARE GOING TO NEED IDM to get a reliable download.
Download IDM ---> https://www.internetdownloadmanager.com/download.html
Install it and follow these directions to enable resume downloads in IDM ---> http://forum.xda-developers.com/showthread.php?t=2765456
If you do not do the steps above, you most likely will have failed download after failed download.
Even after setting this up, the firmware download failed on me twice. I deleted it from the download list in IDM and started it again.
IDM integrates well with Internet Explorer. Kinda buggy with Chrome. I would suggest using IE for the rest of this Tutorial.
Ok, now that you have that squared away, move on to step 1
_________________________________________________________________________________________________________________________
1) Flash your phone back to NE3. You can get that here ---> http://www.sammobile.com/firmwares/download/31482/L520VPUBNE3_L520SPTBNE3_SPR/ (click Regular Download, then on new page right-click Confirm Download and click SAVE AS. After that the IDM window should pop up. Just Start Download)
Also go ahead and download download the NJ1 in case things get rough. List of all firmwares here ---> http://www.sammobile.com/firmwares/database/SPH-L520/
2) Download and install the Samsung drivers ---> http://www.mediafire.com/download/a4hd8y0c1iakysk/Samsung-Usb-Driver-v1.5.49.0.exe
Download Odin 3.09 ---> http://androidhost.org/PVAIv
Unzip Odin to a folder or desktop. Do not run it from in the zip folder.
3) Run Odin 3.09.
Reboot your S4 Mini SPH-L520 into download mode. Turn phone off > Hold Volume Down, Home Button, and Power Button all at the same time. Wait for the phone to buzz and the pop up on the screen. Release the buttons and press Volume Up to confirm.
Now plug in your phone to your computer. It might take a few seconds for the drivers to install. Wait until Odin shows blue color in the first bar on the left side. Should say 0:[COM3] (the COM number will be different depending on your computer and the USB port you plugged it into)
VERY VERY IMPORTANT! Make sure that the AUTO-REBOOT and F. RESET TIME boxes ARE checked. Make sure that the RE-PARTITION box is NOT checked.
4) Unzip the NE3 download from earlier. Click on the AP button in Odin and navigate to where you unzipped NE3. It should be a .MD5 type of file
Give Odin a few mins to check the file. It may appear that Odin has hung up, just be patient.
After Odin has run the check, it should say ok in the little window on the bottom left. Now click START and wait.
DO NOT bump the phone, the laptop, the usb cord, and MAKE SURE THE BATTERY DOES NOT FALL OUT!!!
After Odin is done flashing, it will reboot the phone. After the initial reboot, the phone will reboot itself once more. Be patient
Now wait for the phone to completely boot up.
5) After you have got back to ME3, you can follow this guide to root it ---> http://androidxda.com/root-samsung-galaxy-s4-mini-sprint-sph-l520
You already have most of the files you need. Just follow the instructions and download what you do not have already.
By the way, in Odin the AP button and the PDA button are the same
(This method should not trip the Knox counter, but I am unsure. Mine was already tripped before all of this)
OPTIONAL (this will trip the Knox counter and lose warranty status)
6) Now you can use this guide to install the custom recovery ---> http://techbeasts.com/2014/05/04/in...-root-sprint-samsung-galaxy-s4-mini-sph-l520/
Again, you already have most of the files you need. DL what you don't have.
_________________________________________________________________________________________________________________________
I am planning on instaling CM11 ---> http://forum.xda-developers.com/showthread.php?t=2669991
This ROM apparently needs a specific recovery in order to work properly. I installed that one instead.
MAKE A BACKUP IN THE RECOVERY OF THE STOCK ROM BEFORE FLASHING ANY CUSTOM ROMS, or else be sorry later.
This is about as simplified as I could get it. Hope this helps out those of you that were as confused as I was.
I will not be providing support. Simply do not have the time. There is more than enough info here to help you figure out what to do.

fire3element said:
I have obtained a Sprint s4 mini. From what I can find, the current kernel is SE secure enforcing.
The exact build number is KOT49H.L520_4.4.2_0016
Build date is Oct 7 2014
I am not new here, I know that all known root methods are now bust. What other options are there?
Searching seems to be pretty difficult for this device. All searches for bootloader and recovery come up for the i9190 / i9195
If I use Kies or Odin to flash a previous recovery image, will that brick the device? Also in the settings, it says Secure Boot Status - Type: Samsung
Guess that is referring to the Knox enforcing
The particular image I had in mind to flash with Odin is SPR-L520VPUAMK2-20131115204826
Will it work? Or am I screwed?
Click to expand...
Click to collapse
Can you help me to backup your first partition on your phone and send to me. You can use EFS Professional on xda.

Hmm....I installed the NJ1 update through Odin. And then flashed the CF auto root (or maybe it was the recovery.tar) with no issues. I did this when NJ1 was first released.

NCTP2 said:
Hmm....I installed the NJ1 update through Odin. And then flashed the CF auto root (or maybe it was the recovery.tar) with no issues. I did this when NJ1 was first released.
Click to expand...
Click to collapse
Can you backup your phone by EFS Pro and send to me. Thanks.

NCTP2 said:
Hmm....I installed the NJ1 update through Odin. And then flashed the CF auto root (or maybe it was the recovery.tar) with no issues. I did this when NJ1 was first released.
Click to expand...
Click to collapse
I was unsure about it considering all the changes with SE Secure and Knox. Always pays to be safer than sorry. I could not find any reports of this anywhere after hours of reading and searching. Thanks for confirming though. :good:
quanqw said:
Can you backup your phone by EFS Pro and send to me. Thanks.
Click to expand...
Click to collapse
I am sorry, I have been really busy. What exactly are you trying to do? Asking someone to backup sensitive data from their phone and share it to a stranger can be alarming.
At least tell us what is going on or why you need the backup.

worked
fire3element said:
I was unsure about it considering all the changes with SE Secure and Knox. Always pays to be safer than sorry. I could not find any reports of this anywhere after hours of reading and searching. Thanks for confirming though. :good:
I am sorry, I have been really busy. What exactly are you trying to do? Asking someone to backup sensitive data from their phone and share it to a stranger can be alarming.
At least tell us what is going on or why you need the backup.
Click to expand...
Click to collapse
thanks alot
the baseband nearly killed me but i thanked my God for you. it worked for me
my question is, is there any way to get it work for domestic sim outside USA?