Related
Hello.
I was running cm9 for a few months without problems. But since the update from Januari the 13th apps started crashing.. I then tried to completly reinstall (wipe everthing), but got stuck on bootloop. Then I thought lets try cm10, and also I get stock on the booting screen.
These are the steps I did.
Flashed LT26i_6.1.A.2.50_1257-5499_WORLD.ftf to go back to stock rom.
Went trough the wizard and all and let it settle down for a few minutes.
Shutdown.
Fastboot boot.img from FXP202-cm-10-20130110-UNOFFICIAL-nozomi.zip
Fastboot reboot
Enter recovery
Flash rom FXP202-cm-10-20130110-UNOFFICIAL-nozomi.zip
Flash gapps gapps-jb-20121011-signed.zip
Wipe cache
Wipe dalvik
Reboot system
But it never boots, I get stuck on bootscreen (same procedure I did with CM9, but also got stuck on bootscreen),
What am I doing wrong?
Try doing full wipe and reinstall CM 10 as you did previously
Sent from my Xperia S using xda app-developers app
I tried that too. Like this you mean
1. Fastboot boot.img
2. Fastboot reboot
3. Enter recovery
4. Factory reset
5. Wipe/format system, cache, data, dalvik
6. Install Rom zip
But then I get error and says installation aborted..
Sent from my LT26i using xda app-developers app
dumbl3 said:
I tried that too. Like this you mean
1. Fastboot boot.img
2. Fastboot reboot
3. Enter recovery
4. Factory reset
5. Wipe/format system, cache, data, dalvik
6. Install Rom zip
But then I get error and says installation aborted..
Sent from my LT26i using xda app-developers app
Click to expand...
Click to collapse
I have the same problem My phone not boot in just freexperia logo and cwm5.5.0.4. My /data partition can't mount and format I can't install any rom:crying: Heeeeeelp:crying:
All will be fixed
dumbl3 said:
Hello.
I was running cm9 for a few months without problems. But since the update from Januari the 13th apps started crashing.. I then tried to completly reinstall (wipe everthing), but got stuck on bootloop. Then I thought lets try cm10, and also I get stock on the booting screen.
These are the steps I did.
Flashed LT26i_6.1.A.2.50_1257-5499_WORLD.ftf to go back to stock rom.
Went trough the wizard and all and let it settle down for a few minutes.
Shutdown.
Fastboot boot.img from FXP202-cm-10-20130110-UNOFFICIAL-nozomi.zip
Fastboot reboot
Enter recovery
Flash rom FXP202-cm-10-20130110-UNOFFICIAL-nozomi.zip
Flash gapps gapps-jb-20121011-signed.zip
Wipe cache
Wipe dalvik
Reboot system
But it never boots, I get stuck on bootscreen (same procedure I did with CM9, but also got stuck on bootscreen),
What am I doing wrong?
Click to expand...
Click to collapse
Follow this thread for Kernel and Rom installation; http://forum.xda-developers.com/showthread.php?t=1879982
Follow this other to select your Rom; http://forum.xda-developers.com/showthread.php?t=1642480
And take that cm-10-20130110-UNOFFICIAL is CM 10.2 for such reason look for JB Gapps For Android version 4.1.2
I flashed the Rom very well, also the kernel. my problem were the Gapps. I see there that you do not have the correct gapp zip for cm-10-20130110-UNOFFICIAL;This is CM 10.2 after installation and you need a 4.1.2 JB Gapps. Try and repeat the process.
Regards,
apsanchezs said:
I see there that you do not have the correct gapp zip for cm-10-20130110-UNOFFICIAL;This is CM 10.2 after installation and you need a 4.1.2 JB Gapps. Try and repeat the process.
Click to expand...
Click to collapse
I do have the correct gapps. This CM is android version 4.1.2. Here I downloaded the latest for CyanogenMod 10.0.x which is for android versions 4.1.x.
Anyway after a whole evening/night of flashing I finally managed to get it working via hei1125 cm10 version:
http://goo.im/devs/hei1125/nozomi
I dont know what I did to make it working again, but it does.. CM10 does look a lot nicer then CM9. Although I heard it has some bugs, which yet I still have to encounter..
FXP202-cm-10-20130110-UNOFFICIAL-nozomi.zip fails
dumbl3 said:
Hello.
I was running cm9 for a few months without problems. But since the update from Januari the 13th apps started crashing.. I then tried to completly reinstall (wipe everthing), but got stuck on bootloop. Then I thought lets try cm10, and also I get stock on the booting screen.
These are the steps I did.
Flashed LT26i_6.1.A.2.50_1257-5499_WORLD.ftf to go back to stock rom.
Went trough the wizard and all and let it settle down for a few minutes.
Shutdown.
Fastboot boot.img from FXP202-cm-10-20130110-UNOFFICIAL-nozomi.zip
Fastboot reboot
Enter recovery
Flash rom FXP202-cm-10-20130110-UNOFFICIAL-nozomi.zip
Flash gapps gapps-jb-20121011-signed.zip
Wipe cache
Wipe dalvik
Reboot system
But it never boots, I get stuck on bootscreen (same procedure I did with CM9, but also got stuck on bootscreen),
What am I doing wrong?
Click to expand...
Click to collapse
I'm on the same problem. Use FXP201 instead or wait until 203... The cm10-fxp202 doesn't work on my device too. Same procedure as Yours or update from 201 to 202 - all will fail on (my) nozomi.
Hello!
Hello! orange fix for this rom?if so, I would like to link to it? thank you very much :fingers-crossed:
Had same problem with fxp202 ans SSpeed rom.
Just try to install another kernel.
I had same problems with rom's above, I installed nova kernel nozimi and I have no problems anymore.
Sent from my Xperia S using Tapatalk 2
funky0308 said:
Had same problem with fxp202 ans SSpeed rom.
Just try to install another kernel.
I had same problems with rom's above, I installed nova kernel hikari and I have no problems anymore.
Sent from my Xperia S using Tapatalk 2
Click to expand...
Click to collapse
i got same plobrem with You.
Hello,
I have a problem updating my nozomi (xperia s) to the newest cm version. I always get error 7 - some symlinks failed and i cant install an update without factory reset / wipe user data. After this step i can install the zip, but without wipeing, always the same error.
When i'm installing updates on my girlfriend's urushi (xperia ray), everything works fine.
Any ideas?
Thanks
Enable signaturecheck in recovery before install. It worked for me.
Gesendet von meinem Xperia S mit Tapatalk 2
Make sure you flash the good .img before flashing the ROM !
alexdan2302 said:
Hello,
I have a problem updating my nozomi (xperia s) to the newest cm version. I always get error 7 - some symlinks failed and i cant install an update without factory reset / wipe user data. After this step i can install the zip, but without wipeing, always the same error.
When i'm installing updates on my girlfriend's urushi (xperia ray), everything works fine.
Any ideas?
Thanks
Click to expand...
Click to collapse
It's always recommend to wipe all (cache, davlink even system) then flash.
Be sure to mount system and then try.
And of course, check is you zip file o.k (maybe download again)
Even if you updating cm to new version it's best if you wipe.
I know that's lot of work, but only then you'll have good battery life, smooth and fast ROM and stability.
Sent from my LT26i using Tapatalk 2
Reinstalled apps and Data from googleserver after a datawiped update shoudn't be a Problem, or?
Gesendet von meinem Xperia S mit Tapatalk 2
I had just the same problem today. I installed cm10 from recovery and did everything you did!!!!
What i did to solve this prblem is:
- Went into recovery.
- wiped cache and dalvik.
- flashed the latest CM10 (FXP215 to be precise) again!!
- flashed gapps again!!
- after flashing both zips I wiped dalvik and cache again.
- Than reboot.
If you keep getting into bootloops, keep doing these steps. Beliefe me man I had the exect same problam today and this solved it . Just dont panic or do something stupid and have alot of patients! :good:
But this is not a so called clean install. I use factory reset to have a clean install or just wipe data partition. After 1st boot I restore only some of my saved data with titanium backup.
Gesendet von meinem Xperia S mit Tapatalk 2
i have been running the kiss kernel for a while now, last night i tried to flash the hellboy kernel and retern to my pacman rom. but it still boots, i have cleared all my caches formated everything but my sd card, have tried flashing all kiss kernels and multipul hellboy kernels, but never gets passed the boot screen.. any ideas?
i managed to get it to the android is upgrading.. starting apps thing, but it gets stuck there.
Did you wipe anything when you flashed the kernel? If the kernel was for jellybean it shouldn't hang like that... not sure?
lilrob1213 said:
Did you wipe anything when you flashed the kernel? If the kernel was for jellybean it shouldn't hang like that... not sure?
Click to expand...
Click to collapse
yeah i wiped the cache, devlink cache, data, system, and a factory reset, been trying to figure it out all day but have not made much improvement
JARR3DF15CH3R said:
yeah i wiped the cache, devlink cache, data, system, and a factory reset, been trying to figure it out all day but have not made much improvement
Click to expand...
Click to collapse
and you installed a rom after wiping those things right? I'm assuming... but just wondering. What rom did you flash and are you CDMA virgin mobile?
lilrob1213 said:
and you installed a rom after wiping those things right? I'm assuming... but just wondering. What rom did you flash and are you CDMA virgin mobile?
Click to expand...
Click to collapse
yeah i installed it after, pacman http://forum.xda-developers.com/showthread.php?t=1948770&page=12
im with telus gsm. the rom was working fine, but i went to change the kernel to hellboy cause i herd it was a bit better and now im in this bootloop
also not running the newest version of that rom, i am running v15a
Oh okay wellllll I'm on virgin mobile and I don't know much about the primou phones and rom and kernel compatibility so I'm afraid I'll have to leave this to someone who knows more... good luck to you though... maybe try booting into bootloader from the recovery and flash the boot.img you had before then flash the rom again?
lilrob1213 said:
Oh okay wellllll I'm on virgin mobile and I don't know much about the primou phones and rom and kernel compatibility so I'm afraid I'll have to leave this to someone who knows more... good luck to you though... maybe try booting into bootloader from the recovery and flash the boot.img you had before then flash the rom again?
Click to expand...
Click to collapse
thanks anyways, ill be sure to give that a try:silly:
Did u wait Little longer time while first boot???? Choose latest kernel n flash. .
Hit thanks if I helped u!!!
bahubali67 said:
Did u wait Little longer time while first boot???? Choose latest kernel n flash. .
Hit thanks if I helped u!!!
Click to expand...
Click to collapse
yeah i always wait a little while, i have chosen latest kernel, has not made a difference, i have gotten better results using an older one of the titanium kiss, hellboy doesnt seem to work with my phone for some reason
Did you use the command
fastboot flash boot boot.img or just
fastboot boot boot.img?
Also,after flashing it,does the terminal say something like this?
Okay.
Okay.
Finished.
Edit:also,see that you are flashing the kernel in the fastboot screen(where it says 'fastboot usb'),and not in the Hboot(bootloader) screen.
mihirengg19 said:
Did you use the command
fastboot flash boot boot.img or just
fastboot boot boot.img?
Also,after flashing it,does the terminal say something like this?
Okay.
Okay.
Finished.
Edit:also,see that you are flashing the kernel in the fastboot screen(where it says 'fastboot usb'),and not in the Hboot(bootloader) screen.
Click to expand...
Click to collapse
i am using the all in one tool kit to flash my kernel, yes i am in fastboot, a window pops up runs through code and my phone reboots, i have changed the kernel on it before, but for some reason this time it wont boot properly at all, the phone is currently at the " android is upgrading" screen, it was the starting apps box with the spinning circle
if you say that it is stuck at android is upgrading - that's because the dalvik works and it is deodexing your gapps.
so i suppose you flashed kernel, flashed rom and gapps and rebooted. well this works from time to time but you have to reboot between flashing rom and gapps.
1. download this kernel: hellboy
2. go to bootloader and flash the kernel.
3. go to recovery and: do a factory reset + wipe system - no need for wiping dalvik or cache cause factory reset does them both.
4. flash your rom
5. reboot.
6. if it boots properly, reboot to recovery and now flash GAPPS package.
1ceb0x said:
if you say that it is stuck at android is upgrading - that's because the dalvik works and it is deodexing your gapps.
so i suppose you flashed kernel, flashed rom and gapps and rebooted. well this works from time to time but you have to reboot between flashing rom and gapps.
1. download this kernel: hellboy
2. go to bootloader and flash the kernel.
3. go to recovery and: do a factory reset + wipe system - no need for wiping dalvik or cache cause factory reset does them both.
4. flash your rom
5. reboot.
6. if it boots properly, reboot to recovery and now flash GAPPS package.
Click to expand...
Click to collapse
thank you so much 1ceb0x! my phone has been in this bootloop for an entire 24 hours,
1ceb0x said:
if you say that it is stuck at android is upgrading - that's because the dalvik works and it is deodexing your gapps.
so i suppose you flashed kernel, flashed rom and gapps and rebooted. well this works from time to time but you have to reboot between flashing rom and gapps.
1. download this kernel:
2. go to bootloader and flash the kernel.
3. go to recovery and: do a factory reset + wipe system - no need for wiping dalvik or cache cause factory reset does them both.
4. flash your rom
5. reboot.
6. if it boots properly, reboot to recovery and now flash GAPPS package.
Click to expand...
Click to collapse
hey icebox, i have the same problem, stuck on pacman logo
can you tell me which hellboy kernel should i use?
i've flashed the 1st one on the mediafire list. thanks!
chikuera said:
hey icebox, i have the same problem, stuck on pacman logo
can you tell me which hellboy kernel should i use?
i've flashed the 1st one on the mediafire list. thanks!
Click to expand...
Click to collapse
Thats the old version.... See the changelog code and flash dat in future..... Right now.... Here u go....
http://www.mediafire.com/?waggdha1ir1lxz0
Hi there !
I have a problem with my phone, this afternoon i finally decide to get on CM 10.2, it seems that everything went well but i have the pop-up "com.android.phone has stopped" which pop again and again every second. I tried to wipe data from the recovery and with the option on the settings, and i also tried to put the phone on airplane mode and then switch it off but i still have the problem.
I downloaded CM, gapps and CWM with the links in the official CM10.2 thread and i read carefully the instructions, i don't think that i have forgot something.
Does anybody have an idea for this problem?
Popofthepop said:
Hi there !
I have a problem with my phone, this afternoon i finally decide to get on CM 10.2, it seems that everything went well but i have the pop-up "com.android.phone has stopped" which pop again and again every second. I tried to wipe data from the recovery and with the option on the settings, and i also tried to put the phone on airplane mode and then switch it off but i still have the problem.
I downloaded CM, gapps and CWM with the links in the official CM10.2 thread and i read carefully the instructions, i don't think that i have forgot something.
Does anybody have an idea for this problem?
Click to expand...
Click to collapse
flashed the boot.img? fastboot erase cache after flashing the boot.img? wipe cache and dalvik in recovery after flashing the rom?
Yes, boot.img flashed, wiped cache + dalvik + data, but i don't use fastboot erase cache, isn't it the same thing as wipe cache? Is it important to wipe right after i flashed the ROM ? I think i did it after i flash boot.img
Popofthepop said:
Yes, boot.img flashed, wiped cache + dalvik + data, but i don't use fastboot erase cache, isn't it the same thing as wipe cache? Is it important to wipe right after i flashed the ROM ? I think i did it after i flash boot.img
Click to expand...
Click to collapse
It is vital. I actually fastboot erase cache, before and after I flash anything through fastboot, and I never have any problems.
Hmm ok, does I have to get back on stock or i can reflash the ROM and the boot.img directly, like on the official thread?
Popofthepop said:
Hmm ok, does I have to get back on stock or i can reflash the ROM and the boot.img directly, like on the official thread?
Click to expand...
Click to collapse
you can reflash, but do a full wipe in recovery first,
format cache, system, data and sdcard.
copy the rom back onto the card.
fastboot erase cache, flash the boot.img from the rom.zip and fastboot erase cache again.
then back to recovery and flash the rom and you should be good to go
I still have the pop-up =/ I exactly did what you wrote. By the way, it's the last nightly that i flashed.
What version (date please) of gapps do you use? Could it be you're running gapps for 4.2 on a 4.3 rom?
Sent from my HTC One X using xda app-developers app
I downloaded the package for CM10.2.x, 20130813.
EDIT: hboot 1.72.0000, don't know if it can help.
Popofthepop said:
I downloaded the package for CM10.2.x, 20130813.
EDIT: hboot 1.72.0000, don't know if it can help.
Click to expand...
Click to collapse
That should be the right gapps for CM10.2. About hboot I don't know exactly but I think it should be supported.
I just flashed the last nightly, and the pop-up don't pop anymore ! But i can't activate wifi =/
Popofthepop said:
I just flashed the last nightly, and the pop-up don't pop anymore ! But i can't activate wifi =/
Click to expand...
Click to collapse
Flashed the boot.img of the installed nightly ?
sent from my .......
Yes, full wipe then flash boot and rom + gapps, like nogotaclue told me.
My Xperia ZL won't allow me to install a custom ROM.
Here are the steps I've taken.
1. Updated to 10.6.... (Lollipop fw) via Flashtool
2. Boots correctly, everything seems to work.
3. Flashed boot.img from Paranoid Android and went into TWRP to flash the ROM zip (wiped cache, system and data before).
Did step 3 to test the same for OmniRom too.
4. Phone boots, shows Bootanimation, shows Optimizing apps, then hangs after finish and does step 4 again.
Please help me, I could install custom ROMs on the device before, suddenly it does not work anymore.
Note: EVERYTHING works fine with Stock. Flashed stock ftf multiple times and tried these steps.
Thanks for your help
It seems to be a Bootloop. Try below steps;
1. Through TWRP wipe (system+cache+dalvic cache+data+android secure)
2. Install ROM.zip
3. Wipe cache+dalvic cache+data
4. Reboot
Hope the above steps helps you
Regards,
hitman-xda
@hitman-xda I've tried these steps, except for android secure.
What is that partition and what does it do?
Cannot find it in Advanced Wipe of TWRP.
Thanks
It is the mysterious part. Actually no one knows about it. Some says, it contains secured links/data of some apps.
If you are clean flashing ROM, that's means you have to wipe everything except storage part. That's the reason I mentioned it.
If you can't find it, just leave it
@hitman-xda So I've already done what you suggested, with no luck.
Guess I'm stuck on stock till someone helps me
Thanks for your reply
did you install de correct kernel?
maybe you should wipe everything, install the correct kernel and after that, install the custom ROM
i don't now if it will work, but at least try
I did fastboot flash boot boot.img (got it from ROM zip)
Then erased everything and flashed ROM.
No luck
Does that Paranoid Android was built for your phone?
Your phone loops from 'optimizing apps' , that means your phone is unable to load dalvic/art for the apps.
Also check weather PA ROM can be flashed over lollipop, if not then you have to downgrade an then try the same procedure.
Also you can download stock kernel with recovery, flash it and then directly try to flash your respective ROM.
Usually ROM.zip contains kernel and get flashed during installation of zip, just the thing is they can be flashable over some selective android versions.
Hello,
I don't know why my lg g3 phone doesn't want boot on custom rom.
I have the LG G3 d855 model, 16gb memory and here are my procedure to install every custom rom :
1. Flash Stock ROM using LGUP (the version of the firmware is not important but the possibility to root is)
2. Install KingRoot and get root
3. Install AutoREC and enter to the recovery
8. Flash Recovery TWRP 3.1.0-2
9. Reboot to the new recovery
10. ADVANCED WIPE (wipe cache, dalvik cache, data and SYSTEM)
11. Flash baseband 21C
12. Flash CUSTOM rom
13. Wipe cache and dalvik cache
14. Flash Gapp
15. Wipe cache and dalvik cache
16. Reboot
I think I did nothing bad...
but the phone does not start and it stays at the initial logo screen (not the LG logo, but the custom rom logo). I waited over 10 minutes to boot but nothing. Even though I install the identical rom again or install an anoter rom, each time the same issue.
This happens with all custom rom (xenonhd, resurrection remix, and now lineageOS)
I can use and boot on stock rom but each time I want to install a custom rom, my phone doesn't want to boot. The phone display stays at the initial rom logo screen.
It seems that I am alone to have this problem.
I don't know why and I search everywhere to find out the solution...
PS : My phone never restart by itself. I never have bootloop with my phone when I using stock rom and same with custom rom..
The problem is the boot with a custom rom. The phone don't want to boot and stay on logo loading...
Any suggestion may be help.
Thank you.
1. Once you installed TWRP you don't have to go back to stock to switch roms. From then on you can just download zips and flash them.
2. You need to delete everything (including system) except internal and external storage ( so you can still flash the zip for xceed, otherwise you will delete it). Remember that you will lose all your apps including your data with it. You can backup them with titanium backup tho. Pictures and video's will still be there as they are stored on the internal or external storage.
3. You also need to flash the GAPPS package after flashing rom, for xceed (7.1.1), pick nano (ARM)
4. Wipe cache and dalvik after flashing and reboot.
5. Make a backup before you do so !!!!!!
Good luck.
Jornwitt said:
1. Once you installed TWRP you don't have to go back to stock to switch roms. From then on you can just download zips and flash them.
2. You need to delete everything (including system) except internal and external storage ( so you can still flash the zip for xceed, otherwise you will delete it). Remember that you will lose all your apps including your data with it. You can backup them with titanium backup tho. Pictures and video's will still be there as they are stored on the internal or external storage.
3. You also need to flash the GAPPS package after flashing rom, for xceed (7.1.1), pick nano (ARM)
4. Wipe cache and dalvik after flashing and reboot.
5. Make a backup before you do so !!!!!!
Good luck.
Click to expand...
Click to collapse
Hello,
1. I think that but with specific rom, some people tell us to flash stock rom before flashing a custom rom. eMMC bug related ?
2. Deleting the system changes nothing because the system is wiped when I flash the rom, right ?
3. if the rom boot first then I will install Gapps. Else, I don’t install because the rom doesn’t want to boot.
1. Well .. I've been switching between fulmics,xceed,rr, .. etc without any problem so no, there is no need to go back to stock everytime.
2. Try it, you won't be able to boot until you flash a new rom, but it could help. That's why you take a backup in the first place. It is more 'clean' and if you don't try it you won't know.
3. Sometimes you have to flash gapps directly after the rom or you will be in for a bad time if you do afterwards.
Once you have TWRP recovery installed it's the easiest thing ever to flash a new rom. Make sure your zip files are downloaded okay. Download the MD3 to check it. Try to download via MEGA app or so, because browsers downloads tend to have errors sometimes.
Apart from that. Don't root via kingroot. They have had some suspicious cases where malware was installed on the phone when rooting.
If nothing's works. Go back to full stock through KDZ, root wit your PC, install TWRP via autorec, go to recovery, wipe everything, install modem 21C, install rom and gapps, wipe cache, reboot. Don't try anything other than that.
I have the same problem
Jornwitt said:
1. Well .. I've been switching between fulmics,xceed,rr, .. etc without any problem so no, there is no need to go back to stock everytime.
2. Try it, you won't be able to boot until you flash a new rom, but it could help. That's why you take a backup in the first place. It is more 'clean' and if you don't try it you won't know.
3. Sometimes you have to flash gapps directly after the rom or you will be in for a bad time if you do afterwards.
Once you have TWRP recovery installed it's the easiest thing ever to flash a new rom. Make sure your zip files are downloaded okay. Download the MD3 to check it. Try to download via MEGA app or so, because browsers downloads tend to have errors sometimes.
Apart from that. Don't root via kingroot. They have had some suspicious cases where malware was installed on the phone when rooting.
If nothing's works. Go back to full stock through KDZ, root wit your PC, install TWRP via autorec, go to recovery, wipe everything, install modem 21C, install rom and gapps, wipe cache, reboot. Don't try anything other than that.
Click to expand...
Click to collapse
Hello,
I have a question.
Can you give me a gapp 100% compatible with all custom rom with android 7.1.2, because i think opengapp are not reliable. Maybe the gapp will cause my issue and the rom won't boot.
Can i use this one https://forum.xda-developers.com/on...isited-slim-gapps-6-0-7-0-unofficial-t3462088 ?
I always use PICO version of gapp
Thank