Develop Bugs

[MOD] T-Mobile Samsung Galaxy S II Stock Recovery

T-Mobile Samsung Galaxy S II Stock Recovery
Some of you have been asking me for the stock recovery, and after a few minutes with Gillbostonian on IRC, I finally got it pulled.
Explination
What we have here is a stock recovery.img pulled from a stock T-Mobile SGH-T989 (Samsung Galaxy S II).
With this you can recover your phone using ODIN, to return it to a factory state.
Downloads
To restore the stock recovery to your phone I have a nice little tar file that will take care of the job for you that you can grab from here.
If you like my work..
and wish to donate you can buy me my very own T-Mobile Samsung Galaxy S II by using the details posted here.

How to Flash
We are going to be using Odin in this explanation to flash the stock kernel to your phone.
Downloads
First you are going to want to start by downloading all the needed files onto your computer and then place them onto your Desktop.
Samsung Kies
Odin3-v1.85.zip
SGH-T989-Stock-Recovery.tar
Process
Once you have everything downloaded and on your desktop, you are going to want to first install kies.
After this is done you should restart your computer for proper driver installation.
Next, extract Odin to a new folder on your Desktop. Leave the tar in the form it is.
Now, open up Odin by double clicking the .exe in the folder you extracted it to.
The most important step is now, you need to put your device into Download/ODIN mode so your computer will recognize it and be able to flash to it. To do this simply turn your phone off completely (or pull the battery). Then you are going to want to use the following button combination to force your device into download mode:
Hold the volume up/down and power button all at the same time.
Click to expand...
Click to collapse
Now ODIN should have recognized your device ( it may take a while for the drivers to complete installation so don't panic the first time).
Lastly, we want to click on the PDA button and then search for the SGH-T989-Stock-Recovery.tar we download earlier and placed on the Desktop.
If all of the above has taken place you are free to hit the Start button.
Rebooting into Recovery
Rebooting into recovery is almost just as easy, but a little less complicated.
Just turn your phone off all the way and boot into recovery by holding down vol up and vol down, pressing power until it vibrates, and letting go of power but at the same time keeping the vol buttons down. (or just by using Rom Manager from the Market.)
Click to expand...
Click to collapse
Done!
If all has gone well at this point the flash should be proven successful and your phone should reboot like normal.
If so, please feel pressured to give yourself a pat on the back, that was tough!

Thank you!
Sent from my SGH-T989 using XDA App

Thanks, much appreciated
Sent from my SGH-T989 using Tapatalk

Bout time bubby
Sent from my HTC Glacier using XDA App

Is this going to help out the soft bricks aswell? I think we need an Odin flashabale rom for that. I will work on it tommorow
Sent from my SGH-T959V using XDA App

excellent! Thanks a million!
Sent from my SGH-T989

Where not worthy. Thank you so much.

Many thanks!!!
---------- Post added at 02:17 AM ---------- Previous post was at 02:08 AM ----------
A little something to show my appreciation and to help towards your goal of the SGSII.
Confirmation number: 2G010761V3185764T

atoore said:
Is this going to help out the soft bricks aswell? I think we need an Odin flashabale rom for that. I will work on it tommorow
Sent from my SGH-T959V using XDA App
Click to expand...
Click to collapse
I'm actually getting ready to upload, test, and release that here in the next few minutes.

Here you go!! @bubby
confirmation: 90K10751MY7851216

^ Gil - thanks for your help as well as without your device we wouldn't have stock recovery tonight!

No problem man!! It's my pleasure I'm glad that my device has been big help to all of us. we got the stock recovery and now we will get the stock Tmobile full rom for odin in couple hrs..Thanks to Bubby again

Thanks, Bubby. Quite a few of us on the forum have been waiting for this path back to stock before rooting our phones. Your efforts are appreciated!

With out bubby and Gill We wouldnt have this!! Ty again bubby! i will be donating to ur phone once i get paid and i hope everyone else does after this great task u have done for the community!!

Does this also flash the stock Kernel, or do we have to flash UVKID's odin then this odin?
I assume we have to flash UV's odin first, but I just want to be clear.

So just to clarify, after completing this what should you see when you do the both volume buttons and then power button (without USB plugged in)? Is an update from sd card/wipe data screen the stock recovery our phone ships with?

I wanted to see if someone could tell me the series of steps to get this and the kernel loaded.
Do you do this in odin first, and then flash the kernel to get back to stock? Just curious on what it done first, second, third. The directions on the OP are good but I don't know how to get everything to come together.

Jjday7 said:
I wanted to see if someone could tell me the series of steps to get this and the kernel loaded.
Do you do this in odin first, and then flash the kernel to get back to stock? Just curious on what it done first, second, third. The directions on the OP are good but I don't know how to get everything to come together.
Click to expand...
Click to collapse
I don't think it quite matters what you do first or second. I did it in the reverse order. Matter of fact I loaded an old nandroid backup I had made before and then did this. No cwm and no root anymore. This is only what I did though, I can't say it's the correct way. All I can say is everything works for me with these steps (maybe I screwed something up big time who knows).

ODIN BACK TO STOCK!
power off phone
pull out battery
GRAB THIS STUFF :http://forum.xda-developers.com/showthread.php?t=1319830
turn on odin
attach phone to pc with usb cable
now while holding down both volume buttons put battery back in.
now you should be in download mode and go back to stock with odin from here!
make sure u put the proper tar file in pit in there proper places on odin and ur set to go.
Enjoy and also make sure u have the proper samsung drivers

Galaxy note 2 WONT BOOT!!!

Really need some assistance here if someone could please help. I downloaded chainfire 3d, because i read it would speed up my game lag/speed. After install, it asked for a reboot....my phone hasnt been able to boot now, it has been stuck on the logo screen. I can get into recovery mode, i did a reset and formatted everything (which i REALLY didnt want to do), but i need my phone on asap. After all that, nothing has worked after reboot. Still stuck on logo screen, someone please give me any ideas to get this back on its really upsetting Thanks a lot, really hope someone has some ideas.

englishguy26 said:
Really need some assistance here if someone could please help. I downloaded chainfire 3d, because i read it would speed up my game lag/speed. After install, it asked for a reboot....my phone hasnt been able to boot now, it has been stuck on the logo screen. I can get into recovery mode, i did a reset and formatted everything (which i REALLY didnt want to do), but i need my phone on asap. After all that, nothing has worked after reboot. Still stuck on logo screen, someone please give me any ideas to get this back on its really upsetting Thanks a lot, really hope someone has some ideas.
Click to expand...
Click to collapse
Do you have a nandroid available? Otherwise I'd advise that you use Odin and go back to full stock
Sent from my SPH-L900 using xda app-developers app

englishguy26 said:
Really need some assistance here if someone could please help. I downloaded chainfire 3d, because i read it would speed up my game lag/speed. After install, it asked for a reboot....my phone hasnt been able to boot now, it has been stuck on the logo screen. I can get into recovery mode, i did a reset and formatted everything (which i REALLY didnt want to do), but i need my phone on asap. After all that, nothing has worked after reboot. Still stuck on logo screen, someone please give me any ideas to get this back on its really upsetting Thanks a lot, really hope someone has some ideas.
Click to expand...
Click to collapse
Odin back to stock

skw5115 said:
Do you have a nandroid available? Otherwise I'd advise that you use Odin and go back to full stock
Sent from my SPH-L900 using xda app-developers app
Click to expand...
Click to collapse
Thanks for the quick reply, i dont know what a nandroid is...so im assuming i dont lol Ive got odin, how do i go back to full stock?

englishguy26 said:
Thanks for the quick reply, i dont know what a nandroid is...so im assuming i dont lol Ive got odin, how do i go back to full stock?
Click to expand...
Click to collapse
Download the toolkit:
http://forum.xda-developers.com/showthread.php?t=1957155
Choose to download factory image and flash through Odin.
Download mode is volume down+home button and hold power button together untill Galaxy Note2 screen comes up, the let go.

englishguy26 said:
Thanks for the quick reply, i dont know what a nandroid is...so im assuming i dont lol Ive got odin, how do i go back to full stock?
Click to expand...
Click to collapse
Follow Jed instructions above but in the future please make a backup(nandroid) in recovery so you can restore if necessary.

Note 2 wont boot up
Jed Dignazio said:
Download the toolkit:
http://forum.xda-developers.com/showthread.php?t=1957155
Choose to download factory image and flash through Odin.
Download mode is volume down+home button and hold power button together untill Galaxy Note2 screen comes up, the let go.
Click to expand...
Click to collapse
since u know a lot about samsung andriod, etc i could really use some advice and hope you could help me.
I got a note 2, After some crash it woudn't boot up anymore it doesn't get futher than samsung logo. now i want to get it back to stock,
And readed this threat. i downloaded the samsung toolkit , but not sure what option to press, also that's becaus it says i have to get my phone to USB debugg mode or something. in the setting but i can't get to them becaus my phone wont boot? please help me!

Please read forum rules before posting
Questions go in Q&A
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator

Chainfire 3D doesnt work on Galaxy Note 2, unfortunately.

joeyakascar said:
since u know a lot about samsung andriod, etc i could really use some advice and hope you could help me.
I got a note 2, After some crash it woudn't boot up anymore it doesn't get futher than samsung logo. now i want to get it back to stock,
And readed this threat. i downloaded the samsung toolkit , but not sure what option to press, also that's becaus it says i have to get my phone to USB debugg mode or something. in the setting but i can't get to them becaus my phone wont boot? please help me!
Click to expand...
Click to collapse
http://www.sxtpdevelopers.com/showthread.php?t=74
Download and instructions to get you back to LJC stock.

joeyakascar said:
since u know a lot about samsung andriod, etc i could really use some advice and hope you could help me.
I got a note 2, After some crash it woudn't boot up anymore it doesn't get futher than samsung logo. now i want to get it back to stock,
And readed this threat. i downloaded the samsung toolkit , but not sure what option to press, also that's becaus it says i have to get my phone to USB debugg mode or something. in the setting but i can't get to them becaus my phone wont boot? please help me!
Click to expand...
Click to collapse
If you can still get into Download Mode you can always flash the stock rom back using the Odin tool on your PC. Use the procedure below to get into download mode:
Entering download mode is very simple. First you will need to turn off your device. Once it’s off, you need to press this button combination: volume down, power button and home button. Keep them pressed until the download mode shows up. Once you’re there, you will be requires to press volume up to enter the download mode or volume down to cancel and reboot the device.
Then follow these instructions:

If u have a custom recovery there's always this http://forum.xda-developers.com/showthread.php?t=2086769
And sadly yes cf3d does not work on any device with touchwiz jellybean

What I did in that situation is first download a stock deodexed rom.
Then connect your phone with your pc and open the Odin program on your computer.
(may or may not have to install Kies)
Then flash the deodexed rom to your phone.
Sent from my SPH-L900 using JellyBombed Tapatalk 2

[Q] boot loop after using mobile odin...please tell me not hard brick

Hey everyone, first time posting, but followed this forum for a while now.
Ok, so I had been running CM10 on my ICS S3 for a while, but wanted to start fresh and upgrade to JB, and see how I liked it. I followed this link:
androidrootz.c o m/2012/10/how-to-unroot-samsung-galaxy-s3-no.html
to flash my stock ROM back to the phone. (Hope linking is permitted, if not I apologize). I am on Mac and therefore used Mobile Odin Pro to help me achieve a fresh S3. I started at step 4, bc I didn't care to reset my flash counter. Everything was going smoothly until I hit step 15. It's here that the phone will flash the Samsung boot screen momentarily, then show the "blue droid" running script for less than a second, and repeat over and over again.
I've attempted to put it in recovery/download(is there a difference between the two) mode, but the phone repeatedly does what was just described. What options do I have to get this phone back in working order?
Please help me, King Newb, if there is actually any help that can be given. I really don't like using my old iPhone as my primary again. I just want my S3 back, preferably running JB and rooted. Please and thanks guys.
Out.

HungJury said:
Hey everyone, first time posting, but followed this forum for a while now.
Ok, so I had been running CM10 on my ICS S3 for a while, but wanted to start fresh and upgrade to JB, and see how I liked it. I followed this link:
androidrootz.c o m/2012/10/how-to-unroot-samsung-galaxy-s3-no.html
to flash my stock ROM back to the phone. (Hope linking is permitted, if not I apologize). I am on Mac and therefore used Mobile Odin Pro to help me achieve a fresh S3. I started at step 4, bc I didn't care to reset my flash counter. Everything was going smoothly until I hit step 15. It's here that the phone will flash the Samsung boot screen momentarily, then show the "blue droid" running script for less than a second, and repeat over and over again.
I've attempted to put it in recovery/download(is there a difference between the two) mode, but the phone repeatedly does what was just described. What options do I have to get this phone back in working order?
Please help me, King Newb, if there is actually any help that can be given. I really don't like using my old iPhone as my primary again. I just want my S3 back, preferably running JB and rooted. Please and thanks guys.
Out.
Click to expand...
Click to collapse
Actually, you can't post links cause you're a new user.
Here's what you should follow: http://forum.xda-developers.com/showthread.php?t=1822308
To get in download mode: Hold Vol down+Home + Power button
To get in recovery mode: Hold Vol up+Home + Power button
Instead of getting CWM, I would suggest getting TWRP, which can be done by downloading goomanager from the play store. (After you're done flashing stock rooted JB from the link above).

I am on Mac, is there an alternative to Odin, or a version that runs on OS X?
Thank you for putting me on the right track

HungJury said:
I am on Mac, is there an alternative to Odin, or a version that runs on OS X?
Thank you for putting me on the right track
Click to expand...
Click to collapse
Mobile Odin or Heimdall.

OK, I need a little more clarification. My phone doesn't boot, so are you saying that I can use Mobile Odin right on my Mac, and is it possible to link me to a proper copy of Heimdall? Also, is there perhaps a step by step instruction set for getting me back to a functioning phone? I clicked your link and found a ton of information, but still unsure which set of steps I need to follow.
Thanks again for your patience.

HungJury said:
OK, I need a little more clarification. My phone doesn't boot, so are you saying that I can use Mobile Odin right on my Mac, and is it possible to link me to a proper copy of Heimdall? Also, is there perhaps a step by step instruction set for getting me back to a functioning phone? I clicked your link and found a ton of information, but still unsure which set of steps I need to follow.
Thanks again for your patience.
Click to expand...
Click to collapse
Oh my bad, I replied fast (covering a lot of threads right now). Mobile Odin won't work.. And I haven't seen Heimdall around here. Sorry.
The easiest way would be to use a PC. I'll keep looking for what can be done on Macs (you should do the same )

I followed the steps to the link (used virtual machine) but when I get to the step where you press start, Odin just says "all threads completed. (succeeded 0/failed 0). So I think I'm getting close but not quite there yet.
Would it have something to do with the boot loader option? Just curious because of the boot loop I've been stuck in. Btw, I can't get my phone into recovery mode, however download mode still works fine, if that matters.

Another quick update. I've now been able to get into the phone by holding both volume buttons and the power button. Phone boots normally with cm boot logo. However the phone is completely wiped except for stock apps it comes with. This gives me a little more hope but still not sure where to go from here.

Bump. Can't anyone point me in the right direction? My situation is quite unique, as I have found another person explain it happening to them during my search. Want to get this fixed ASAP.
Thanks!

HungJury said:
Bump. Can't anyone point me in the right direction? My situation is quite unique, as I have found another person explain it happening to them during my search. Want to get this fixed ASAP.
Thanks!
Click to expand...
Click to collapse
Download this if you are us using AT&T and if not use the drop down menu on the top left and pick your device and download the latest jellybean update:
http://samsung-updates.com/device/?id=SGH-I747
Flash this download via mobile Odin. Read mobile Odin's directions carefully. You can so keep root of you wanted to through this app. This download will bring you back yo complete stock and will work for you.

HungJury said:
Hey everyone, first time posting, but followed this forum for a while now.
Ok, so I had been running CM10 on my ICS S3 for a while, but wanted to start fresh and upgrade to JB, and see how I liked it. I followed this link:
androidrootz.c o m/2012/10/how-to-unroot-samsung-galaxy-s3-no.html
to flash my stock ROM back to the phone. (Hope linking is permitted, if not I apologize). I am on Mac and therefore used Mobile Odin Pro to help me achieve a fresh S3. I started at step 4, bc I didn't care to reset my flash counter. Everything was going smoothly until I hit step 15. It's here that the phone will flash the Samsung boot screen momentarily, then show the "blue droid" running script for less than a second, and repeat over and over again.
I've attempted to put it in recovery/download(is there a difference between the two) mode, but the phone repeatedly does what was just described. What options do I have to get this phone back in working order?
Please help me, King Newb, if there is actually any help that can be given. I really don't like using my old iPhone as my primary again. I just want my S3 back, preferably running JB and rooted. Please and thanks guys.
Out.
Click to expand...
Click to collapse
I'm having the exact same problem. Is there a solution I need one so bad

I have the same problem as the OP.
I CAN NOT get it into recovery mode.
I CAN get it into download mode.
Is my only option to use ODIN on a windows PC? Does anyone have any clue of what software to download and from where?
Oli

Yeah, I would try that. I'm not to familiar with mobile Odin. I do know that after running certain roms, if you Odin to stock you need to do a factory reset from recovery after the Odin flash.

You're not going to be able to flash stock via odin if you can't get into download mode.
What OS did you come from? What did you do just before this all happened?
Try recovery mode again (vol up + home + power). Release only the power button when the phone vibrates and you see the blue script in the top left corner. Report back

He can get dl mode, not recovery

mrhaley30705 said:
He can get dl mode, not recovery
Click to expand...
Click to collapse
I stand corrected. I should wake up more before I hop on the boards. Cheers

Maybe you don't have cwm installed anymore since you wiped your phone. Try downloading rom manager and flashing cwm recovery then see if you can get into recovery mode.
Sent from my SAMSUNG-SGH-I747

Phone won't boot, can't use Rom manager to flash cwm. I stand by what I said. Flash to rooted stock, use goo manager (or Rom manager) to install custom recovery. Dl and flash Rom.

Mobile Odin works much like the desktop version. The Odin package usually has a recovery so CWM or TWRP will be replaced by stock recovery. Although mobile Odin does have the ability to exclude recovery from the flash. So you will have to get back into down load mode use the desktop version of Odin to stock then flash cfroot with Odin. Now you should be able to get into recovery as cfroot has CWM
Sent from my SAMSUNG-SGH-I747 using xda premium

enewman17 said:
Mobile Odin works much like the desktop version. The Odin package usually has a recovery so CWM or TWRP will be replaced by stock recovery. Although mobile Odin does have the ability to exclude recovery from the flash. So you will have to get back into down load mode use the desktop version of Odin to stock then flash cfroot with Odin. Now you should be able to get into recovery as cfroot has CWM
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
My way has one less Odin flash

[Q] Samsung t989 Galaxy S II - Bootloop HELP please :(

I downloaded the Jedi Mind Trick JB 2 ROM and installed it via clocwork mod recovery .. That went fine but it took me a few days to realize I didnt have a working video camera anymore on my phone.. so I thought to flash a stock ROOTed rom instead...
Then I found this threat about an updated version of Jedi Mind Trick's ROM labled JB 3.. So I wiped as much as I could in recovery and chose to format all the options it gave me in recover , Format system , data , cache , emms(or something) .. and now when I boot the phone , it shows the first flash screen , and the samsung logo starts to shimmer then it reboots back to the splash screen and repeats this process everal times before just going black and sitting there..
So I've successfully bootlooped my phone doing this..
MY PROBLEM -- I don't know how to charge my phone or connect to it to install anything else..
Is this a serious problem? How can I charge my phone to continue troubleshooting it? It still has some battery to try some things but I don't know how to hook it up to transfer any other roms to it via USB cable and PC in it's current state..
I'm very computer savvy but I'm trying to learn this phone modding stuff and I realy hope I didn't brick my phone in this process.
Can someone please help me out here? I'll be on the forums religiously until I figure this out.
What should I start doing first??
Any help would be greatly appreciated!! Thanks!

still working at it
I think I'm at the point of having to use ODIN to flash a new rom since i cannot simply copy this rom to the sdcard to use clockwork to flash it .. Am I correct on this ?
For some reason this rom I found (should be stock rooted tmobile gSII rom) does not want to open from ODIN's PDA button cause its in .zip and not .tar or anything... I'm not sure how to flash this rom with ODIN ( I'm not even 100% sure this is how its supposed to go) Any suggestions ?

phew
UPDATE - So I managed to research enough to find out that there is no way to flash a CUSTOM rom with ODIN.. SO I had to download a stock (presumably rooted) t-mobile rom and flash THAT ...
Now I'm back up with a rooted rom and will begin re-installing clockwork and then my custom deodexed rooted rom afterward.
Thanks for all who almost kinda tried to care to reply in this past 2 hours =) -- As previously mentioned.. I am a nerd.. I just suck at phone modding. Haha
So , looks like I'm in the clear now and don't need any more support on this particular topic yet.

zarklon said:
UPDATE - So I managed to research enough to find out that there is no way to flash a CUSTOM rom with ODIN.. SO I had to download a stock (presumably rooted) t-mobile rom and flash THAT ...
Now I'm back up with a rooted rom and will begin re-installing clockwork and then my custom deodexed rooted rom afterward.
Thanks for all who almost kinda tried to care to reply in this past 2 hours =) -- As previously mentioned.. I am a nerd.. I just suck at phone modding. Haha
So , looks like I'm in the clear now and don't need any more support on this particular topic yet.
Click to expand...
Click to collapse
Is this true? Through a recommendation (haven't done anything to my phone from rooting/flashing KANGSJUGGERNAUT2 years ago), I tried to flash CM10 and ended up with a bootloop myself. Tried flashing through ODIN but it kept crashing; does anyone know why?
Afterward, I tried to reflash it through CWM and from then on bootloops into a installation process that never completes.
For some reason my CWM turned super slow, freezes/hangs and reboots after a few minutes.
I gave the phone to a friend who does this stuff on the regular but he said my initial flash wasn't complete cause in download mode says I'm still running official? No clue.
I was told this via email/chat: "No luck, it won't even boot anymore, I think I'll just bring it back tmrw morn
10:43 PM
Sorry I'm at a wedding (yea I know random) I left my phone with coat check
OK I've narrowed down the reason but not the solution, you had an AOKP based ROM which fundamentally is based on CyanogenMod, but it wasn't correctly flashed as the phone still thought it has factory ROMs still running
11:10 PM
Clockworkmod(even though it was working before) wasn't accessing the partitions of the phone correctly so it wasn't properly wiping or flashing properly.
11:12 PM
So basically from the first time you flashed cwm it didn't flash properly then the next time you flashed using the new recovery it didn't flash anything it was supposed to do itself properly , so basically it was a chain of events in addition to a bad boot loader, that's why it never went to recovery or download mode correctly
11:13 PM
That's something that had to do with the way the phone was built meaning you may of had a bad bootloader from the very begin and are now feeling the synptoms
Basically, and I would hate to be the reason or partially the reason you have a dead phone, basically it was a matter of coincedencr that it happened as this could of happened at anytime, once you have a bad boot loader its pretty much down hill from there"
Any helpful insight as how I can rectify this? is my phone truly dead? Sorry about the quoted format, it was copied and pasted.

If I were in your boat, I'd use Odin and flash the stock 4.1.2 ROM.
Sent from my Nexus 7 using Tapatalk 4 Beta

tronmech said:
If I were in your boat, I'd use Odin and flash the stock 4.1.2 ROM.
Sent from my Nexus 7 using Tapatalk 4 Beta
Click to expand...
Click to collapse
The phone won't turn on, unable to go into recovery and download mode; plugged in usb (hear connection beep but pressing power button plays disconnect button) to no avail. What can I do to unbrick?
Stock 4.1.2? Possible over a hardbricked T989 with old 2.3.6?

JahJahLoO said:
The phone won't turn on, unable to go into recovery and download mode; plugged in usb (hear connection beep but pressing power button plays disconnect button) to no avail. What can I do to unbrick?
Stock 4.1.2? Possible over a hardbricked T989 with old 2.3.6?
Click to expand...
Click to collapse
sorry but i have to assume that you are not doing the 3 button recovery or download mode right.
Pull battery, put battery back in, hold power button & Vol +/- untill you see SAMSUNG on the screen ---> let go off power button(keep holding
Vol +/- button) .....u will see recovery. (assuming you did flash cwm before).
Let me know.
hit thanks.

sam.balia1012 said:
sorry but i have to assume that you are not doing the 3 button recovery or download mode right.
Pull battery, put battery back in, hold power button & Vol +/- untill you see SAMSUNG on the screen ---> let go off power button(keep holding
Vol +/- button) .....u will see recovery. (assuming you did flash cwm before).
Let me know.
hit thanks.
Click to expand...
Click to collapse
I believe I am doing it correct, I have been entering recovery and download mode many times, right before I soft bricked it.
And sorry, no, I've tried many times, many methods and my phone is confirmed as entirely hard bricked.
SUPAR SAD, but thank you!

dont give up
JahJahLoO said:
I believe I am doing it correct, I have been entering recovery and download mode many times, right before I soft bricked it.
And sorry, no, I've tried many times, many methods and my phone is confirmed as entirely hard bricked.
SUPAR SAD, but thank you!
Click to expand...
Click to collapse
you can try using adb and put the phone in dl mode.
sometimes its as easy as pull battery and wait awhile (20 min or more) and try again.
if you've exhausted all possibilities, you can use a jig to force a dl mode.
let me know

sam.balia1012 said:
you can try using adb and put the phone in dl mode.
sometimes its as easy as pull battery and wait awhile (20 min or more) and try again.
if you've exhausted all possibilities, you can use a jig to force a dl mode.
let me know
Click to expand...
Click to collapse
I don't know what adb is, or how to use it; I have, however seen my friend RDP to my desktop and do something and used the term 'adb' in his attempt to code through the phone.
I've done that battery waiting period, for nearly an hour and still no result.
After doing some researching, I have found that many people have stated a USB JIG would not be applicable to a 'hard bricked' phone. I really wanted to try as it looked like the most, simple and inexpensive solution.

JahJahLoO said:
I don't know what adb is, or how to use it; I have, however seen my friend RDP to my desktop and do something and used the term 'adb' in his attempt to code through the phone.
I've done that battery waiting period, for nearly an hour and still no result.
After doing some researching, I have found that many people have stated a USB JIG would not be applicable to a 'hard bricked' phone. I really wanted to try as it looked like the most, simple and inexpensive solution.
Click to expand...
Click to collapse
If you know for a fact that you bricked your s2, maybe wrong rom or kernel that u flashed by accident then.....
contact these guys.... http://brickedmyphone.com/contact-me/
good like and click thanks if you agree.

sam.balia1012 said:
If you know for a fact that you bricked your s2, maybe wrong rom or kernel that u flashed by accident then.....
contact these guys.... http://brickedmyphone.com/contact-me/
good like and click thanks if you agree.
Click to expand...
Click to collapse
Lols, you're really fishing for them "Thanks"; you got it buddy. Very swift responses. :cyclops:
Anyway, I'm still searching the net for anymore possible solutions.
Thanks.

JahJahLoO said:
Lols, you're really fishing for them "Thanks"; you got it buddy. Very swift responses. :cyclops:
Anyway, I'm still searching the net for anymore possible solutions.
Thanks.
Click to expand...
Click to collapse
fishing for them ???????
what the hell does that even mean? it seems that brick did hit u in the head!!!

sam.balia1012 said:
fishing for them ???????
what the hell does that even mean? it seems that brick did hit u in the head!!!
Click to expand...
Click to collapse
It might as well have... :crying:

[Q] s4 mini doesnt work

my phone dosn't turn on it just flashes the Samsung when i boot it up. i need help dont know what to do
help please

epiczsniperz said:
my phone dosn't turn on it just flashes the Samsung when i boot it up. i need help dont know what to do
help please
Click to expand...
Click to collapse
Boot it holding the volume up button. This should get you into so-called "recovery" where you can, among other things, restore it to defaults.
If recovery also doesn't work (which would be unusual), boot it holding volume DOWN button. This will get you into a "download" mode where you can use ODIN to flash new recovery (such as CWM recovery which is very nice and powerful), or even flash entire firmware from scratch.
Good luck, let us know how it goes ~
[edit] oh and do all that while having it connected to USB power, in case the battery is empty.

still doesnt work
sysKin said:
Boot it holding the volume up button. This should get you into so-called "recovery" where you can, among other things, restore it to defaults.
If recovery also doesn't work (which would be unusual), boot it holding volume DOWN button. This will get you into a "download" mode where you can use ODIN to flash new recovery (such as CWM recovery which is very nice and powerful), or even flash entire firmware from scratch.
Good luck, let us know how it goes ~
[edit] oh and do all that while having it connected to USB power, in case the battery is empty.
Click to expand...
Click to collapse
I tried both methods. Is my phone fixable. I messed it up somehow with Odin and I might have deleqted the software can I reinstall it onto my phone help please

Help!!!!
epiczsniperz said:
I tried both methods. Is my phone fixable. I messed it up somehow with Odin and I might have deleqted the software can I reinstall it onto my phone help please
Click to expand...
Click to collapse
I have the same problem , did you advance it? thx

help
cellsan said:
I have the same problem , did you advance it? thx
Click to expand...
Click to collapse
i couldnt fix it none of the steps worked. what about you?

epiczsniperz said:
I tried both methods
Click to expand...
Click to collapse
Could you clarify what happens when you do those methods exactly?
I think the download mode should basically always work...
[edit] oh wait, I think I mislead you by accident (sorry!). You should boot while holding HOME and volume up (recovery) or down (download).

stilll nothing
​
sysKin said:
Could you clarify what happens when you do those methods exactly?
I think the download mode should basically always work...
[edit] oh wait, I think I mislead you by accident (sorry!). You should boot while holding HOME and volume up (recovery) or down (download).
Click to expand...
Click to collapse
I notice no changes when I did them methods my phone still doesnt turn on

still nothing
I downloaded recovery clockwork and installed . On oden it said pasd but now I cant access recovery booting either

epiczsniperz said:
I downloaded recovery clockwork and installed . On oden it said pasd but now I cant access recovery booting either
Click to expand...
Click to collapse
Anything doesn't work , When I boot while holding HOME and volume up (recovery) appears the blue advice in the upper left corner and about 2 segs after the cellphone restart again, again and so on, When I boot with the down (download) the process on kies working good but when ends the cellphone restart again, again and so on. I'm start to think that something in the hardware is damage :crying:

looks like you messed something up there...
Anyway, if your phone is rooted, and/or you don't care about warranty you can get it in download mode (you said it works fine with kies until reset, so I suppose it means that download mode is at least accessible).
And after that use Odin to reinstall the stock rom completely.
Or, again with Odin install custom recovery, and then whatever ROM you like.
While working with odin, be sure to stick to the guides here on XDA. (for a custom recovery see: http://forum.xda-developers.com/showthread.php?t=2364980)

smartxdev said:
looks like you messed something up there...
Anyway, if your phone is rooted, and/or you don't care about warranty you can get it in download mode (you said it works fine with kies until reset, so I suppose it means that download mode is at least accessible).
And after that use Odin to reinstall the stock rom completely.
Or, again with Odin install custom recovery, and then whatever ROM you like.
While working with odin, be sure to stick to the guides here on XDA. (for a custom recovery see: http://forum.xda-developers.com/showthread.php?t=2364980)
Click to expand...
Click to collapse
I have the custom stock but it still wont boot up

epiczsniperz said:
I have the custom stock but it still wont boot up
Click to expand...
Click to collapse
If you're not entirely stock you'll have trouble using Kies.
I myself had trouble when tried to revert to stock ROM from CM.
It failed to restore NANDroid backup every time, and I also didn't succeed in flashing the stock image with Odin as well.
In the end, I succeeded with this ROM (which is modified stock TW), usin ODIN. You can try this, just read and understand the instructions in the thread before you do anything.
Ironically, after a couple of days after reverting to stock rom I was so annoyed by the speed decrease compared to CM, that I reinstalled CyanogenMod back, found TouchWiz stuff I missed via separate apps, and I'm pretty happy with it ever since.
Bottom Line: anyways, if you already on custom stuff with altered warranty, you must get custom recovery working first, then it will be simple.