Develop Bugs

[Q] Make clockwork mod zip into odin tar

Recently clockwork mod is shot for me, It won't do anything to put it simply.
I have searched these forums for 3 weeks trying to find a solution and thus far haven't come up with one. Odin however, works flawlessly. So my question is it possible to take a zip file that you flash via clockwork mod and make it Flashable via Odin instead?

although I am unsure of being able to package a tar from a zip I have a question for you. how are you flashing your cwm? if its through rom manager it won't stick. you need to odin a kernel packaged with cwm to work.

patrao_n said:
although I am unsure of being able to package a tar from a zip I have a question for you. how are you flashing your cwm? if its through rom manager it won't stick. you need to odin a kernel packaged with cwm to work.
Click to expand...
Click to collapse
Running Calk's Rom with his recovery that is pre-packaged, I have manually installed clockwork mod via Odin with no luck. Flashing a zip after just results in it hanging (Loads the boot animation and then turns off, or just doesn't load the boot animation at all.) Restoring a backup fixes it (Which leads me to believe its not flashing the files correctly)

oh ok gotcha. well I hope you get an answer soon

patrao_n said:
oh ok gotcha. well I hope you get an answer soon
Click to expand...
Click to collapse
If you have any other ideas as to what it might be please let me know, I've completely exhausted my ideas...

I would use this tar. its gunslinger. http://db.tt/XSVcu2it remember to flash it in pda section of odin let me know if it doesn't work k.

Autris said:
Recently clockwork mod is shot for me, It won't do anything to put it simply.
I have searched these forums for 3 weeks trying to find a solution and thus far haven't come up with one. Odin however, works flawlessly. So my question is it possible to take a zip file that you flash via clockwork mod and make it Flashable via Odin instead?
Click to expand...
Click to collapse
All you have to do is take the zImage out of the zip and use 7zip or similar to create a tar file. You should be able to flash that with Odin.

http://androidforums.com/behold-2-all-things-root/54424-creating-custom-roms-backups-odin.html
For all interested parties.

really good info thanks man

[Q] CWM Recover Fail... Help???

Ok... I'm a complete noob (saibot) when it comes to recoveries. I've been used to rooting for years but never wanted anything other than the stock rom/recovery until recently when I had to unbrick my phone after making a stupid error. Now, I want to gain acceptance into the CWM world and for some reason it isn't working.
What I've tried:
1) Downloading the recovery from the CWM official website. I downloaded the touch one.
2) Since the file was in img form (why?) I used a converter to change it into TarMD5
3) I tried flashing it with Odin 3.09
4) It showed a green "Reboot" where most have shown "Recovery" in the videos I watched before attempting.
5) And that's all it did was reboot instead of installing the custom recovery.
What did I do wrong? And why am I not as awesome as I think I am? Help! :crying:

ChampionLukeGabriel said:
Ok... I'm a complete noob (saibot) when it comes to recoveries. I've been used to rooting for years but never wanted anything other than the stock rom/recovery until recently when I had to unbrick my phone after making a stupid error. Now, I want to gain acceptance into the CWM world and for some reason it isn't working.
What I've tried:
1) Downloading the recovery from the CWM official website. I downloaded the touch one.
2) Since the file was in img form (why?) I used a converter to change it into TarMD5
3) I tried flashing it with Odin 3.09
4) It showed a green "Reboot" where most have shown "Recovery" in the videos I watched before attempting.
5) And that's all it did was reboot instead of installing the custom recovery.
What did I do wrong? And why am I not as awesome as I think I am? Help! :crying:
Click to expand...
Click to collapse
What you did wrong was using or trying to flash/use CWM recovery in the first place.
Here is the correct way to flash root and custom recovery:
Step #1
Download and Odin flash cf-autoroot: https://dl.dropboxusercontent.com/u/45687485/CF-Auto-Root-hltetmo-hltetmo-smn900t.tar.md5
Step #2
Download and Odin flash TWRP 2.7.2.0: https://dl.dropboxusercontent.com/u/45687485/TWRP_2720.tar
After doing the above you will no longer have any root or recovery issues.
For best results use Odin v1.85 which can be found here:
https://dl.dropboxusercontent.com/u/45687485/Odin85.zip
Good luck!

Thank you for your reply.... So, am I to understand that CWM will not work at all on my Note 3?
Before your reply, I tried out TWRP 2.8 and it was really laggy... Should I go and get 2.7.2 instead?

re: twrp/cwm
ChampionLukeGabriel said:
Thank you for your reply.... So, am I to understand that CWM will not work at all on my Note 3?
Before your reply, I tried out TWRP 2.8 and it was really laggy... Should I go and get 2.7.2 instead?
Click to expand...
Click to collapse
Lot's of people have been having issues with cwm recovery ever since
the NF1 official Samsung N900T firmware was released.
TWRP 2.7.2.0 works perfectly on all N900T Note 3 roms.
The download link I posted is specifically made for the
Note 3 N900T, not all versions of twrp work properly with
all phones and or all models.
Good luck!

Stuck in Odin Mode [from attempt to install a recovery rom]

I'd appreciate any help I can get guys.
So today, for the first time ever I rooted my android.
Found a simple video on how to and it worked. I then wanted to try a custom rom [Cyanogenmod 12?] On a video it was said to have a custom recovery rom first. Well, I tried Flashing TWRP. It asked to reboot. I pressed "yes Please". After that it restarted and was stuck at:
"Could not do normal boot" Odin mode (High speed)
I did a reset and now its just at:
"Odin mode(high speed)"
I saw someone on a random forum describing the same problem. He said he fixed it installing a recovery rom. Im guess from odin
since I cant do things on my phone. But I don't even know how to go about it. I just now I need a Tar. file
Please give me direction .__.

Try TWRP tar from Odin with phone in download mode; TWRP recovery tar linked below.
http://www.techerrata.com/file/twrp2/trltespr/openrecovery-twrp-2.8.5.0-trltespr.img.tar
If that doesn't work, you may have to Odin the stock tar.
I'm wondering if you misread the CF Auto root prompt to update the su binary? Update the su binary but don't choose the TWRP option even if you have TWRP. If you get recovery working, delete the cache and dakvik cache and reboot.

Didn't work out...at least the way I did it. I'm still new to this. Id appreciate more broken down instructions if youre willing to help

Sixgotfangs said:
Didn't work out...at least the way I did it. I'm still new to this. Id appreciate more broken down instructions if youre willing to help
Click to expand...
Click to collapse
What version of Odin do you have? Should be 3.07 with C.F. auto root. What have you flashed in Odin? Not familiar with the Odin message you gave; did anything change with the new recovery tar flash in Odin?
Won't boot or flash recovery? If so, you need to factory reset and Odin stock tar.
https://www.androidfilehost.com/?fid=95853297432265112
The instructions for stock tar are below but it's important to remember when flashing stock tars to power down first prior to going to download. You may not have any choice but power down to reach download mode; pull battery if you can't power down.
http://forum.xda-developers.com/showthread.php?p=56853325
If you can't factory reset, Odin the stock tar and see if it boots.

Yes, I have the 3.07. Only thing ive done was Root. I tried the recovery rom from a mobile download. That's as far as I got. All the recovery files I get never end up showing in the pda file search. .tar or .md5 is what it calls for. If I CAN factory reset from where im at now how do I do so. If I can start ALL over with someone who is actually up to date and knows what theyre doing id feel more comfortable. right now nothings happened and my phone is still at "odin mode (hgh speed) --downloading.

Sixgotfangs said:
Yes, I have the 3.07. Only thing ive done was Root. I tried the recovery rom from a mobile download. That's as far as I got. All the recovery files I get never end up showing in the pda file search. .tar or .md5 is what it calls for. If I CAN factory reset from where im at now how do I do so. If I can start ALL over with someone who is actually up to date and knows what theyre doing id feel more comfortable. right now nothings happened and my phone is still at "odin mode (hgh speed) --downloading.
Click to expand...
Click to collapse
ok, check my post above for updates.
Also, don't use the phone to download tar files unless you're using Flashify from Google Play. Download the tars on PC, move to folder that Odin resides in to find easily. You'll need to open the archive and drag the files there if zipped. The stock tar should be zipped but not sure about the recovery tar.

Cant believe I didn't see the last section on that post. Sorry about that. Anyway, I am downloading those files. Looks like its gonna take some time though. I'll go through each step you said and let you know.

Forgot to mention that you should close Odin after each flash attempt. You may have already noticed by now.
To get to CM after stock tar:
1) Root with CF Auto root, update su binary/reboot (you should wait no longer than 5 minutes for Knox prompt from supersu.
2) Odin TWRP recovery tar using same method as stock tar; Odin will only write over stock recovery on this step.
3) factory reset and flash CM in recovery. But also follow suggested instructions in the ROM you choose.

So far so good. The lil blue loading bar is filling.

got back to rooting. but I didn't do anything else. haven't even went to super user

Sixgotfangs said:
got back to rooting. but I didn't do anything else. haven't even went to super user
Click to expand...
Click to collapse
Booted? That's good news!
Can't remember if you have to open it or not. You should get a superuser update and possibly a su binary update but not so important going to another ROM. The su binary update is the one that I was suggesting not to use the TWRP option; I think the option is normal? Eventually, you should get the pop-up to disable Knox notifications; reboot if takes longer than 5 minutes.
Ready for TWRP? Use Odin. Flashify is something you could look into for updating TWRP, as needed. It's good for backing up recoveries and kernels, too. But watch those kernels for installed lib modules; Flashify won't restore those properly. Rely on flash zips for those; same applies for stock kernels, zip should include the stock modules.
It's late; you're probably done for the night. I'm out too.

samep said:
Booted? That's good news!
Can't remember if you have to open it or not. You should get a superuser update and possibly a su binary update but not so important going to another ROM. The su binary update is the one that I was suggesting not to use the TWRP option; I think the option is normal? Eventually, you should get the pop-up to disable Knox notifications; reboot if takes longer than 5 minutes.
Ready for TWRP? Use Odin. Flashify is something you could look into for updating TWRP, as needed. It's good for backing up recoveries and kernels, too. But watch those kernels for installed lib modules; Flashify won't restore those properly. Rely on flash zips for those; same applies for stock kernels, zip should include the stock modules.
It's late; you're probably done for the night. I'm out too.
Click to expand...
Click to collapse
Yeah, things are back to normal. Thanks again. As for the next steps, pretty lost. Im going to check the play store for an superuser update but the SU binary update....that's where I start getting lost. sorry for not being up to date with the terminology. But I am gonna check back on those links and look for the TWRP. and then use it like I did for those last files...{that's what Im getting from your messages} correct me if im straying from the path lol. catch ya later

I'm confusing you a bit with the the su binary update and SuperSU update. To keep it simpler, that can wait until after you flash CM, if that's your goal. Those are prompts so don't be too concerned. Don't think you'll see Knox in CM.
So to keep it simple, you need TWRP to flash a custom ROM. I suggest the Odin tar in the link sent earlier.
After getting your custom ROM flashed in recovery, follow the prompts but if you see the su binary update prompt, don't choose the TWRP option. I think that caused your initial recovery issue but can't say for sure.

samep said:
I'm confusing you a bit with the the su binary update and SuperSU update. To keep it simpler, that can wait until after you flash CM, if that's your goal. Those are prompts so don't be too concerned. Don't think you'll see Knox in CM.
So to keep it simple, you need TWRP to flash a custom ROM. I suggest the Odin tar in the link sent earlier.
After getting your custom ROM flashed in recovery, follow the prompts but if you see the su binary update prompt, don't choose the TWRP option. I think that caused your initial recovery issue but can't say for sure.
Click to expand...
Click to collapse
Hey there, Ok so. After messing around I ended up getting that TWRP package to work. I thought It was a SINGLE file, that's where I got stuck. but the whole ?.rar showed up in the pda selection In odin and I ran it. Worked fine. didn't see anything about updates ...still.
I restarted and went to recoverymode. Teamwin popped up like ive seen from other videos. Guessing im on the right track. So right now I don't need to be worrying about SuperSu or Rashr? or should I be dealing with those two apps? ALSO is Rom installer anything to pay attention to?

At this point, you can look into a ROM installer or Flashify but I'd recommend just following the developer OP for whatever ROM you choose.
And yes, no need to worry with SuperSU or su binary update. Just follow the prompts when they appear after flashing ROM.

samep said:
At this point, you can look into a ROM installer or Flashify but I'd recommend just following the developer OP for whatever ROM you choose.
And yes, no need to worry with SuperSU or su binary update. Just follow the prompts when they appear after flashing ROM.
Click to expand...
Click to collapse
Thanks so much! The videos ive seen have been much simple-r for installing roms SO I may survive this whole experience after all...Yesterday was kind of a bad time to almost loose my phones functionality....being on the job hunt and all. need those phone calls Lol. So thanks again. Im hoping to try out cyanogenmod 12. I'll definitely shoot off a flare gun if I fail lol.

No problem. Glad to be of some help. Godspeed on your journey and best of wishes for your career and rooted ventures!

samep said:
No problem. Glad to be of some help. Godspeed on your journey and best of wishes for your career and rooted ventures!
Click to expand...
Click to collapse
SUCCESS! Thanks again Sensei Lol

samep said:
No problem. Glad to be of some help. Godspeed on your journey and best of wishes for your career and rooted ventures!
Click to expand...
Click to collapse
eh...celebrated too early I guess. Ever run into camera connection errors?

Sixgotfangs said:
eh...celebrated too early I guess. Ever run into camera connection errors?
Click to expand...
Click to collapse
Is the error while still on stock or CM?
Now that you can wipe data, you can factory reset and either Odin the stock tar or flash CM.
If you prefer to take least intrusive approach, try going into recovery and delete cache and dalvik cache and reboot. If still not working, the factory reset. If still having camera issues, then decide if you want to go with stock tar in Odin again or CM a clean install; wipe user data first.
Personally, I'd wipe everything except my titanium backups and go back to Odin stock tar and make sure stock works fully before going to CM. In a situation like you were in, I would have powered down, flashed the stock tar in Odin and let it auto boot. Flash the custom recovery so I could wipe everything and then power down again and flash the stock tar in Odin just to get a clean start with root and custom ROM.
Edit- what is camera connection error? Oh, I see; lost camera. New thread. Maybe someone on CM can help you.

[Guidance] SGH-T989 UPDATING ISSUE!

Good evening everyone!
I've recently wanted to update my Hercules from 4.1 (I know it's reeealy outdated) to version 6.0 Marshmallow.
So I did a few steps and now I cant' seem to go any further, and I need your help.
So far, I've done the following:
-Installed TWRP 2.8.7.0
-Used Odin to flash the TWRP mentioned above
Now, I know there are a few problems regarding this version of the TWRP on the Hercules, so I tried fixing it by using Odin again and flashing the updated 2.8.7.1 and even the 3.0 version that I found on some threads, but with no sucess.
I haven't even had the chance to install Marshmallow on my phone in the first chance, because I couldn't find any .ZIP folders on the TWRP instalation menu.
I really appreciate your help guys, I'm a noob at this and I'm just starting to figure what is what, I just need my phone updated. It's running so far atleast, so it's not hard bricked I guess.

Did you follow the instructions to flash TWRP using Odin?

olafo73 said:
Did you follow the instructions to flash TWRP using Odin?
Click to expand...
Click to collapse
I'm pretty sure I did everything I was intended to do. I installed Samsung Kies so I could install the drivers on my mobile, and then TWRP through Odin properly with the blue light showing up. After flashing it, it turned green and said PASS or PASSED. So I think I did everything right on that end, I can even access TWRP with no real problems.
I even tried to do a ROOT on my system, but again, I couldn't use ZIP or any other files on the TWRP installation option because they simply do not appear

bump

Watching this thread as I have the same problem.
I can boot to TWRP 2.8.7, but if I try to install, there's no file to install from.
I can go back to TWRP 2.6.0, and then mount the card and see the ROM, but every ROM I try fails. Something about non-virtual partitions if I try 4.4 or better, and error executing updater binary if i try 4.1

aguycalled80 said:
Watching this thread as I have the same problem.
I can boot to TWRP 2.8.7, but if I try to install, there's no file to install from.
I can go back to TWRP 2.6.0, and then mount the card and see the ROM, but every ROM I try fails. Something about non-virtual partitions if I try 4.4 or better, and error executing updater binary if i try 4.1
Click to expand...
Click to collapse
How did you go back to TWRP 2.6.0?

N1ZUW said:
How did you go back to TWRP 2.6.0?
Click to expand...
Click to collapse
With Odin.
I can boot in download mode no problem.

N1ZUW said:
Good evening everyone!
I've recently wanted to update my Hercules from 4.1 (I know it's reeealy outdated) to version 6.0 Marshmallow.
So I did a few steps and now I cant' seem to go any further, and I need your help.
So far, I've done the following:
-Installed TWRP 2.8.7.0
-Used Odin to flash the TWRP mentioned above
Now, I know there are a few problems regarding this version of the TWRP on the Hercules, so I tried fixing it by using Odin again and flashing the updated 2.8.7.1 and even the 3.0 version that I found on some threads, but with no sucess.
I haven't even had the chance to install Marshmallow on my phone in the first chance, because I couldn't find any .ZIP folders on the TWRP instalation menu.
I really appreciate your help guys, I'm a noob at this and I'm just starting to figure what is what, I just need my phone updated. It's running so far atleast, so it's not hard bricked I guess.
Click to expand...
Click to collapse
I don't know of any problems with any of the recoveries. However there are different recoveries for different roms which need to be used in a specific order and in a specific way, the first time that you virtually repartition your phone.
Have you gone through the process of applying the "virtual partition" and installing the modified "virtual partition" recovery? This is required for most of the MM roms on this phone (Hercules). The process is very well documented here http://forum.xda-developers.com/galaxy-s2-tmobile/help/guidance-sgh-t989-updating-issue-t3414641 in the #2nd post.

markusrow said:
I don't know of any problems with any of the recoveries. However there are different recoveries for different roms which need to be used in a specific order and in a specific way, the first time that you virtually repartition your phone.
Have you gone through the process of applying the "virtual partition" and installing the modified "virtual partition" recovery? This is required for most of the MM roms on this phone (Hercules). The process is very well documented here http://forum.xda-developers.com/galaxy-s2-tmobile/help/guidance-sgh-t989-updating-issue-t3414641 in the #2nd post.
Click to expand...
Click to collapse
Hi, thanks for replying
No, I dont' take I have taken that step actually. I'm pretty new to this and I tried following every step correctly, but I know that I failed or skipped something at some extent and I've been trying to figure out what exactly, so I can fix it. I guess I need to Virtual Partition my phone then, could you post me the link do to so? Because I think you posted one that would take back to this post

aguycalled80 said:
With Odin.
I can boot in download mode no problem.
Click to expand...
Click to collapse
How do you go in download mode if you have TWRP installed? Does TWRP work as download mode aswell? Thanks for your help man, hope you can fix your phone too!

N1ZUW said:
How do you go in download mode if you have TWRP installed? Does TWRP work as download mode aswell? Thanks for your help man, hope you can fix your phone too!
Click to expand...
Click to collapse
I shut it down in TWRP then hold volume down and power to go into download mode.
My phone has gone backwards now though - it doesn't matter what I load in Odin now, it won't boot up. The SAMSUNG screen is on, with a progress bar, but it never gets to the end. It stops right near the end and it sits there until I reboot it again.

Installing TWRP over CWM?

Hello,
I am wondering if it is possible to install TWRP over top of CWM? When I initially rooted my phone CWM was installed, however to install a new rom I need TWRP. Is this possible?
Thanks,

Skyty said:
Hello,
I am wondering if it is possible to install TWRP over top of CWM? When I initially rooted my phone CWM was installed, however to install a new rom I need TWRP. Is this possible?
Thanks,
Click to expand...
Click to collapse
Yes. It's been a loong time. Best I can recall, I did the following:
1. Flash'd a ZIP of an old TWRP (couldn't find latest in ZIP file)
2. Rebooted into Recovery
3. Used old TWRP to flash IMG file of new TWRP

Just to make sure I understand (as it's been a while since I rooted a phone or done anything like this).
1.) When you say flashed, do you mean in the TWRP app on the screen where you select your phone model?
2.) So if I flash TWRP (in the manner I described above assuming that's what you meant) and reboot into recovery it will overwrite Clockworkmod and then I'll be in TWRP recovery?
3.) If I do this with the most recent TWRP version I'm assuming this step will be unecessary?
My apologies if I misunderstood what you were trying to say! Thanks for taking the time to respond!

Skyty said:
...
1.) When you say flashed, do you mean in the TWRP app on the screen where you select your phone model?
2.) So if I flash TWRP (in the manner I described above assuming that's what you meant) and reboot into recovery it will overwrite Clockworkmod and then I'll be in TWRP recovery?
3.) If I do this with the most recent TWRP version I'm assuming this step will be unecessary?...
Click to expand...
Click to collapse
Quick answers: No, no, and maybe.
It appears that you may be confusing the TWRP app (which is basically useless bloat) with the actual TWRP recovery. You need to find and download the latest TWRP recovery for your device model. If you can find a ZIP of it, great; because CWM can then install TWRP recovery for you (so that when you reboot into recovery, you'll see TWRP instead of CWM). In my case, there was no ZIP available for the latest TWRP; it was available only as an IMG file. An old version of TWRP recovery, however, was and likely still is available in a ZIP file. So use CWM to install that ZIP of older TWRP, which can then install newer TWRP as an IMG file. I'm just a struggling noob myself, but I'm pretty sure CWM is not able to install an IMG file. Good luck!

MrGoodtunes said:
Quick answers: No, no, and maybe.
It appears that you may be confusing the TWRP app (which is basically useless bloat) with the actual TWRP recovery. You need to find and download the latest TWRP recovery for your device model. If you can find a ZIP of it, great; because CWM can then install TWRP recovery for you (so that when you reboot into recovery, you'll see TWRP instead of CWM). In my case, there was no ZIP available for the latest TWRP; it was available only as an IMG file. An old version of TWRP recovery, however, was and likely still is available in a ZIP file. So use CWM to install that ZIP of older TWRP, which can then install newer TWRP as an IMG file. I'm just a struggling noob myself, but I'm pretty sure CWM is not able to install an IMG file. Good luck!
Click to expand...
Click to collapse
Ahhhh, okay that makes sense. I think I follow. Now in another thread you mentioned that if I need to go back and restore I'd use TWRP to flash CWM, hen I can use CWM to recover my old nandroid backups.
A couple final questions. Will I need to do a wipe when I flash the old TWRP zip (side note, do you know a good place to find those)? If I need to go back to CWM is there any place I can find it to flash with TWRP?
Thanks for all your help!

Skyty said:
... if I need to go back and restore I'd use TWRP to flash CWM, hen I can use CWM to recover my old nandroid backups ...
Click to expand...
Click to collapse
Correct. That is IF you can find TWRP and CWM as ZIP files. I used to switch back and forth frequently, but that was years ago. TWRP is so much more useful, I no longer have anything CWM related nor the ZIPs; and can't even find where I got them. I'm pretty sure they were here on XDA. Spent some time searching, no luck. Then I tried Google. The first snippit nail'd it, here:
https://forum.xda-developers.com/galaxy-s4-mini/development/recovery-cwm-twrp-philz-t3182207
Skyty said:
.... Will I need to do a wipe when I flash the old TWRP zip...
Click to expand...
Click to collapse
I never wiped. I seem to recall that when installing to the recovery partition, one of the steps I saw in the log was a wipe or maybe even a reformatting of that partition taking place along the way.
Skyty said:
.... (side note, do you know a good place to find those)? If I need to go back to CWM is there any place I can find it to flash with TWRP?
Click to expand...
Click to collapse
They're both in the link (above).
Skyty said:
.... Thanks for all your help!
Click to expand...
Click to collapse
That's what the [Thanks] button is for, here on xda.

MrGoodtunes said:
Correct. That is IF you can find TWRP and CWM as ZIP files. I used to switch back and forth frequently, but that was years ago. TWRP is so much more useful, I no longer have anything CWM related nor the ZIPs; and can't even find where I got them. I'm pretty sure they were here on XDA. Spent some time searching, no luck. Then I tried Google. The first snippit nail'd it, here:
https://forum.xda-developers.com/galaxy-s4-mini/development/recovery-cwm-twrp-philz-t3182207
Click to expand...
Click to collapse
I appreciate the link, however, I think those zips are for a different model of phone than mine. However, I think I possibly found versions that will work for me... Is there any real way to confirm?
The serranoltexx CWM Zip
https://forum.xda-developers.com/showthread.php?t=2364980&page=99
The serranoltexx TWRP Zip
https://androidfilehost.com/?fid=24052804347768468
However, I'm not 100% certain either of these will work, and I'm not sure how I'd figure that out.
MrGoodtunes said:
That's what the [Thanks] button is for, here on xda.
Click to expand...
Click to collapse
Done!

Skyty said:
... those zips are for a different model of phone ...
Click to expand...
Click to collapse
OMG! You're right, those are for the Value Edition. I completely miss'd the "ve" in them. Sorry.
Skyty said:
... I think I possibly found versions that will work for me..
The serranoltexx CWM Zip
https://forum.xda-developers.com/showthread.php?t=2364980&page=99
The serranoltexx TWRP Zip
https://androidfilehost.com/?fid=24052804347768468 ...
Click to expand...
Click to collapse
I remember using that very CWM zip version 6.0.5.1, so it should work okay. Good find.
I'm not familliar with that particular TWRP zip. It does clearly indicate being for the i9195 model; I'm just not sure about what "open" means at beginning of zip's filename. Still, worth a try. (If it fails, you can more easily find a TAR file of the most recent TWRP and use Odin to install it.)

MrGoodtunes said:
OMG! You're right, those are for the Value Edition. I completely miss'd the "ve" in them. Sorry.
I remember using that very CWM zip version 6.0.5.1, so it should work okay. Good find.
I'm not familliar with that particular TWRP zip. It does clearly indicate being for the i9195 model; I'm just not sure about what "open" means at beginning of zip's filename. Still, worth a try. (If it fails, you can more easily find a TAR file of the most recent TWRP and use Odin to install it.)
Click to expand...
Click to collapse
So, just thought I'd let you know that I'm up and running with LineageOS and I tested reverting back and forth to CWM and TWRP. Eveything seems in working order! I appreciate you help and have clicked the thanks button on your messages! All the best!

Skyty said:
... I tested reverting back and forth to CWM and TWRP. Eveything seems in working order!
Click to expand...
Click to collapse
That's excellent. It's really amazing how much we can do with this little S4mini device; thanks to the work of devs, several of whom are still providing updates. After all there's never been a more powerful device (other than S4mini VE) that weighs under 4 oz.

MrGoodtunes said:
That's excellent. It's really amazing how much we can do with this little S4mini device; thanks to the work of devs, several of whom are still providing updates. After all there's never been a more powerful device (other than S4mini VE) that weighs under 4 oz.
Click to expand...
Click to collapse
Yeah, its amazing! I've been able to breath new life into my old phone, I'm shocked at how well it runs on the S4; not as well as my newer phones, but better than before. Funnily enough, its actually running a newer version of Android than my S8 and S10e haha. Now onto those phones... been trying to get them both rooted but it's looking like a no go haha.