Develop Bugs

[Q] [PROBLEM] htc desire recovery - volume keys not working

Hi!
I recently rooted my Desire with unrevoked 3 and I installed the ReflexS rom. Everything worked perfectly!
I was curious for Cyanogenmod and I downloaded version 7.0.3 directly through Rom Manager. When the download was completed it suggested to install which I agreed. I think clear Dalvik cache was marked, but clear data cache was not. I agreed... maybe my first mistake.
After this Cyanogenmod was installed, but my Desire stayed on the boot screen (sakteboarding android with running arrow) for over 30min so I took out the battery. I restarted and it goes well until the android setup screen "tap the android to begin". I can tap and it gets glowing, but it does not continue! I can not go any further than this. The only thing I can do is choose a language or shutdown.
To overcome this issue I thought of recovering/reinstalling my previous ROM. I also have a Titanium backup.
Now here's the problem: when start up into recovery, my volume buttons won't work so I can not enter into the recovery menu.
What should I do?
I'm getting desperate, because my phone is down at the moment!
Thanks for your help!

you mean volume buttons dont work in recovery or in bootloader ?
in recovery you can navigate using trackpad, in bootloader you must wait around 10-15 seconds until you can use volume buttons to navigate.
and yes it was a BIG mistake not to make a wipe before the flashing of cyanogenmod....
you should have done a full wipe

Ok will firstly, go to the Cyanogenmod stable topic to read how to install out. Secondly, avoid rom manager. Thirdly, to boot into recovery, boot your phone like normal and plug your phone into your pc. After about 20 second the usb will kick in. This is where you use the adb reboot recovery command in command prompt or terminal. Enjoy.
Swyped...

Meaple said:
... After about 20 second the usb will kick in. This is where you use the adb reboot recovery command in command prompt or terminal. Enjoy.
Swyped...
Click to expand...
Click to collapse
can you explain for noobs how to do it? PLEASE!!!
thank you anyway

boot into fastbood mode (hold BACK and POWER).
unzip the attached file into your C:\
open command prompt (accessories)
type
Code:
cd\
fastboot oem gencheckpt
your phone will boot into recovery.

Bortak and Meaple ..... THANK YOU!!!

Mine says waiting for device and nothing happens after I type in the command

dark_polok said:
Mine says waiting for device and nothing happens after I type in the command
Click to expand...
Click to collapse
Do you have the drivers installed? You van try installing and then uninstall HTC Sync to get the drivers.
Sent from my HTC Original Desire with Android 4.0.3 ICS using Tapatalk

I am pretty sure you did not install ADB (correctly). Check my sig how to do.

After Ruu ROM installing, can`t gen in RECOVERY mode
Someone can help me..
I Install RUU ROM from Windows, and then i can`t go to recovery mode in fastboot.. how i can it solved????
I have - revolutionary s-off
Please.. HELP ME!!!

Check bortak's troubleshooting guide.
Sent from my HTC Desire using Tapatalk

bortak said:
boot into fastbood mode (hold BACK and POWER).
unzip the attached file into your C:\
open command prompt (accessories)
type
Code:
cd\
fastboot oem gencheckpt
your phone will boot into recovery.
Click to expand...
Click to collapse
What if your phone doesn't boot into recovery in this case and you get an error that says "FAILED (Status Malformed (1 bytes))"?

dzeksis said:
Someone can help me..
I Install RUU ROM from Windows, and then i can`t go to recovery mode in fastboot.. how i can it solved????
I have - revolutionary s-off
Please.. HELP ME!!!
Click to expand...
Click to collapse
You can alwys get into recovery through the adb shell.

Hi.
I know this tread is old but the issue is relevant because this is still a persistant problem.First of all thanks for the tip and second i have great,great news !!! you dont even have to deassemble the phone to put the up down button to work.Just insert the alcool UNDER the volume button with a seringe with a needle and click the button for a minute or two...wait until the alcool evaporates and VOILÁ !! problem fixem !! Not need todeassemble or using adb.Just do this and you will be fine.

i can't root my wildfire s ...

i have a marvel unlocked s on wildfire s.
i can't root my phone because when i go into the recovery mode, the black screen comes up with the 4 lighting keys. i don't know what to do. i read the related posts but nothing seems to help. could you guys please help.. i unlocked my phone for rooting and now i can't do anything.

You can root your phone by using the HTC super tool, just google for it.
I assume you have stock recovery on your phone, then you actually can't really use that recovery. You should try to root it with supertool
and then install CWM with ROM Manager
I hope this came in handy for you!
Sent from my VegaCream RC2 using xda premium

MrGuyFawkes said:
You can root your phone by using the HTC super tool, just google for it.
I assume you have stock recovery on your phone, then you actually can't really use that recovery. You should try to root it with supertool
and then install CWM with ROM Manager
I hope this came in handy for you!
Sent from my VegaCream RC2 using xda premium
Click to expand...
Click to collapse
i tried the supertool but it doesn't work. i tried everything even the clockworkmode recovery, the flashing of cwm works perfectly fine but the recovery mode doesn't show up so that i can install from sd card. only a black screen with key lighted comes up. i tried the things given in the black screen recovery article of xda .. but nothing seems to help. could you help me out to see through this. my moms htc wildfire s which is one year old works perfectly fine but the problem is with my new one.. i also heard that lot of people are experiencing the same.

After unlocking, you have to root the device first then install CWM and take a nandroid backup thru Recovery option.
For rooting you can also use root.zip method. just google it.
To flash CWM, goto Hboot menu and select fastboot, then goto cmd (command prompt) on pc try using fastboot commands to flash boot.img, system.img and recovery.img.
Hope this may be useful.....

Senthamil said:
After unlocking, you have to root the device first then install CWM and take a nandroid backup thru Recovery option.
For rooting you can also use root.zip method. just google it.
To flash CWM, goto Hboot menu and select fastboot, then goto cmd (command prompt) on pc try using fastboot commands to flash boot.img, system.img and recovery.img.
Hope this may be useful.....
Click to expand...
Click to collapse
bro,
i tried the root.zip method. i copied the zip file on the memory card and then went to hboot. but then i found the error which is : CID ERROR
PRESS POWER BUTTON TO REBOOT.
this is what i get.
i have a s-on unlocked marvel a510e. please help..

ok. now try this way! which helped me to solve the same issue.....
forum.xda-developers.com/showpost.php?p=21891784&postcount=1
hope this may be useful......(if really, press thanks).

Senthamil said:
ok. now try this way! which helped me to solve the same issue.....
forum.xda-developers.com/showpost.php?p=21891784&postcount=1
hope this may be useful......(if really, press thanks).
Click to expand...
Click to collapse
bro, this time i flashed the PG76IMG.zip files but when i go into the recovery to flash install from root.zip, the same black screen comes up. this is the problem which i have been having.. the black screen on recovery which makes us do nothing at all..

i think a new custom recovery has to be made for the htc wildfire s inorder to prevent the black screen on recovery. or does anyone know how to root wildfires without the need to go into any custom recovery mode. please help .. this has become a real problem.. i really wish there was a way.

aryan41 said:
bro, this time i flashed the PG76IMG.zip files but when i go into the recovery to flash install from root.zip, the same black screen comes up. this is the problem which i have been having.. the black screen on recovery which makes us do nothing at all..
Click to expand...
Click to collapse
Maybe you need to downgrade your stock ROM (if you still can boot it up so to say).
Look for a RUU for WFS and try to downgrade/upgrade HBOOT and such to an older/newer version.
Sorry that I can't post any links too RUUs, I'm on my phone.
But there is a tread with these in the Dev section I think, but if they don't work you can just google for them.
tbh I have a similar problem with my bro's WFS, I can't even unlock it because of wrong versions a such so I think your problem could be related to this.
Sent from my VegaCream RC2 using xda premium

Choose the right recovery image....
aryan41 said:
i think a new custom recovery has to be made for the htc wildfire s inorder to prevent the black screen on recovery. or does anyone know how to root wildfires without the need to go into any custom recovery mode. please help .. this has become a real problem.. i really wish there was a way.
Click to expand...
Click to collapse
I think you you've chosen the wrong cwm. Chose the right one here :
http://forum.xda-developers.com/showthread.php?t=1213229
download PG76IMG.zip and you need to install it using fastboot, it will not work using the zip file from your sd card. Make sure you delete that file before attempting what is below (adapted from CafeKampuchia's guide on rooting).
You will need SDK tools for Android, Java runtime, and HTC Sync installed on your Windows computer. Install the SDK tools in a directory named something like c:\android. Put the recovery image in this directory, too, not the zip file.
Boot the phone into HBOOT by turning the phone off, removing the battery, replacing the battery then holding down the power key and volume button. After it scans for PG7610.zip, select FASTBOOT and press the power button then connect the USB cable. The word FASTBOOT will change into FASTBOOT USB. If not, then either your USB drivers for the Wildfire S or Android SDK Tools is not installed properly.
Open a command prompt in Windows and navigate to c:\android
Type the following command: fastboot flash recovery [image name.img]. For example:
c:\android\>fastboot flash recovery recovery-clockwork-5.0.2.8-marvel.img
Hope this will install ClockworkMod recovery properly. (If really press 'thank').

Senthamil said:
I think you you've chosen the wrong cwm. Chose the right one here :
http://forum.xda-developers.com/showthread.php?t=1213229
download PG76IMG.zip and you need to install it using fastboot, it will not work using the zip file from your sd card. Make sure you delete that file before attempting what is below (adapted from CafeKampuchia's guide on rooting).
You will need SDK tools for Android, Java runtime, and HTC Sync installed on your Windows computer. Install the SDK tools in a directory named something like c:\android. Put the recovery image in this directory, too, not the zip file.
Boot the phone into HBOOT by turning the phone off, removing the battery, replacing the battery then holding down the power key and volume button. After it scans for PG7610.zip, select FASTBOOT and press the power button then connect the USB cable. The word FASTBOOT will change into FASTBOOT USB. If not, then either your USB drivers for the Wildfire S or Android SDK Tools is not installed properly.
Open a command prompt in Windows and navigate to c:\android
Type the following command: fastboot flash recovery [image name.img]. For example:
c:\android\>fastboot flash recovery recovery-clockwork-5.0.2.8-marvel.img
Hope this will install ClockworkMod recovery properly. (If really press 'thank').
Click to expand...
Click to collapse
i dont think that would work i've tried every recovery i've found here and still black screen you may want to downgrade your kernel after unlock of bootloader then use superoneclick. if not working look for my post before which uses taco root to root the device

Senthamil said:
I think you you've chosen the wrong cwm. Chose the right one here :
http://forum.xda-developers.com/showthread.php?t=1213229
download PG76IMG.zip and you need to install it using fastboot, it will not work using the zip file from your sd card. Make sure you delete that file before attempting what is below (adapted from CafeKampuchia's guide on rooting).
You will need SDK tools for Android, Java runtime, and HTC Sync installed on your Windows computer. Install the SDK tools in a directory named something like c:\android. Put the recovery image in this directory, too, not the zip file.
Boot the phone into HBOOT by turning the phone off, removing the battery, replacing the battery then holding down the power key and volume button. After it scans for PG7610.zip, select FASTBOOT and press the power button then connect the USB cable. The word FASTBOOT will change into FASTBOOT USB. If not, then either your USB drivers for the Wildfire S or Android SDK Tools is not installed properly.
Open a command prompt in Windows and navigate to c:\android
Type the following command: fastboot flash recovery [image name.img]. For example:
c:\android\>fastboot flash recovery recovery-clockwork-5.0.2.8-marvel.img
Hope this will install ClockworkMod recovery properly. (If really press 'thank').
Click to expand...
Click to collapse
first u need adb.exe, adbwinapi.dll, fastboot.exe in that c:\android\
u need a command in cmd to navigate. "cd c:\android"
yeah other than that its pretty complete. See the post he referring to. I remember using this post to root mine.
androidforums.com/wildfire-s-all-things-root/480954-guide-how-root-wildfire-s-s-finally.html

Try my all in one tool here: http://forum.xda-developers.com/showthread.php?t=1697985
It will work

Senthamil said:
I think you you've chosen the wrong cwm. Chose the right one here :
http://forum.xda-developers.com/showthread.php?t=1213229
download PG76IMG.zip and you need to install it using fastboot, it will not work using the zip file from your sd card. Make sure you delete that file before attempting what is below (adapted from CafeKampuchia's guide on rooting).
You will need SDK tools for Android, Java runtime, and HTC Sync installed on your Windows computer. Install the SDK tools in a directory named something like c:\android. Put the recovery image in this directory, too, not the zip file.
Boot the phone into HBOOT by turning the phone off, removing the battery, replacing the battery then holding down the power key and volume button. After it scans for PG7610.zip, select FASTBOOT and press the power button then connect the USB cable. The word FASTBOOT will change into FASTBOOT USB. If not, then either your USB drivers for the Wildfire S or Android SDK Tools is not installed properly.
Open a command prompt in Windows and navigate to c:\android
Type the following command: fastboot flash recovery [image name.img]. For example:
c:\android\>fastboot flash recovery recovery-clockwork-5.0.2.8-marvel.img
Hope this will install ClockworkMod recovery properly. (If really press 'thank').
Click to expand...
Click to collapse
i used the exact same version of clockworkmode recovery. the problem is not with the recovery i think its with my phone. and i tried downgrading the hboot using ruu but the problem still exists ... that is the black screen on recovery.

rezo609 said:
Try my all in one tool here: http://forum.xda-developers.com/showthread.php?t=1697985
It will work
Click to expand...
Click to collapse
bro, my wildfire s is the new one with the black screen on recovery problem, are u sure this utility will work the new phones also..?

rezo609 said:
Try my all in one tool here: http://forum.xda-developers.com/showthread.php?t=1697985
It will work
Click to expand...
Click to collapse
bro, i tried this but failed. i can't get the recovery screen where i have to select install from sd card. this is my problem .. i don't get the recovery screen instead i get a black screen.

Is your phone a marvelc ?

no it is marvel

i wish some one could come up with custom recovery which doesn't lead into this black recovery screen. please help.. isn't there any other way ?

please help rezo
rezo609 said:
Is your phone a marvelc ?
Click to expand...
Click to collapse
bro, isn't there any other way to root my wildfire s.. without ending up in the black recovery screen.. please help.. i am losing all hope..

[Q] Black Screen

On my HTC One V I unlock bootloader and rooted it successfully. It was working fine, but about 1-2 weeks later, when I was chatting with my friends on Messenger, it was starting to lag like hell until i couldn't do antyhing. I tried to turn it off and on with the power button. When I turned it on, firstly the logo "Quietly Brilliant" appeared and then...there was just a black screen. The phone was still turned on, but just with a black screen.. a slightly lighter black screen. I tried to turn it on and of. I can go to fast boot mode with Volume down+power button. I tried factory reset, but there was still the black screen. I send it to the manufacture, but they said, that the hardware is destroyed, because I've changed it. I think they mean I changed it with root and unlocking the bootloader...but I think that's not true? I don't think root or unlocking bootloader can change hardware. Yet I tried to unroot and relock the bootloader, but I can't do It if I can't connect my phone to my pc anymore. So my questions are:
1)How could I change the hardware?
2)How can I connect my phone to pc?
3)Is there a way to save my phone?
4)How does the manufacture know, that my phone is rooted when it can't be turned on, or connected to pc
5)Do they just lie about the hardware, so I must pay for it?

first of all, are you gsm or cdma? (do you have a sim?) If you can access bootloader, then you can fix your phone (99,9% of times). all you need to do is flash another rom with the correct kernel

mr_nooby said:
first of all, are you gsm or cdma? (do you have a sim?) If you can access bootloader, then you can fix your phone (99,9% of times). all you need to do is flash another rom with the correct kernel
Click to expand...
Click to collapse
Yes, I have s sim..so I have gsm i think? Right now, the manufacture is sending me back my phone. What is the bootloader exactly? Do you mean the combination of the keys volume down+power button?
If yes and I can acces to bootloader, how can I flash the rom with the correct kernel? Does it mean, my phone will be back to normal like it was at the start?
If I can't acces to bootloader, is there still a way to repair my phone?
btw I can't connect my phone to my pc...at least It didn't worked.

Don't worry, when you get back your phone tell me. If you can access your bootloader we will get your phone back to normal :thumbup:

mr_nooby said:
Don't worry, when you get back your phone tell me. If you can access your bootloader we will get your phone back to normal :thumbup:
Click to expand...
Click to collapse
Thank you very much!! How can I contact you when I get my phone back?

lddangsta said:
Thank you very much!! How can I contact you when I get my phone back?
Click to expand...
Click to collapse
first thing, when you get your phone back access the bootloader, hit fastboot and connect the phone to the pc (then after some seconds try vol up or down), it should say fastboot usb. tell me if it does (write it here)

mr_nooby said:
first thing, when you get your phone back access the bootloader, hit fastboot and connect the phone to the pc (then after some seconds try vol up or down), it should say fastboot usb. tell me if it does (write it here)
Click to expand...
Click to collapse
My phone is back. How can I access bootloader?

lddangsta said:
My phone is back. How can I access bootloader?
Click to expand...
Click to collapse
When starting your phone, hold the VOLUME DOWN BUTTON and Power buttons together

Seraz007 said:
When starting your phone, hold the VOLUME DOWN BUTTON and Power buttons together
Click to expand...
Click to collapse
When It's turned off, I hold the volume down button and power button together for 10 seconds. Then I let it go, but there's no bootloader mode. Before I sended it to the manufacture, I somehow did it, but I don't remember how.

lddangsta said:
When It's turned off, I hold the volume down button and power button together for 10 seconds. Then I let it go, but there's no bootloader mode. Before I sended it to the manufacture, I somehow did it, but I don't remember how.
Click to expand...
Click to collapse
Okay I got it. I couldn't access to bootloader because my phone was connected to my pc

mr_nooby said:
first thing, when you get your phone back access the bootloader, hit fastboot and connect the phone to the pc (then after some seconds try vol up or down), it should say fastboot usb. tell me if it does (write it here)
Click to expand...
Click to collapse
Yesm It said fastboot usb. What now?

mr_nooby said:
first thing, when you get your phone back access the bootloader, hit fastboot and connect the phone to the pc (then after some seconds try vol up or down), it should say fastboot usb. tell me if it does (write it here)
Click to expand...
Click to collapse
Yes, it said fastboot usb. What now?

Hey sorry I have to go to school now.. I'll write a little guide as soon as I come back, be patient. In order you have to unlock and root (if you haven't done it already), flash a recovery (I suggest twrp recovery, you can find it in android development or original android development-This also only if you don't have that already), factory reset from recovery, mount usb storage, copy rom to your phone, unmount, flash the rom, reboot into bootloader and flash the correct kernel found in the rom thread. This should work. I'll give you a hit when I get back tough.

mr_nooby said:
Hey sorry I have to go to school now.. I'll write a little guide as soon as I come back, be patient. In order you have to unlock and root (if you haven't done it already), flash a recovery (I suggest twrp recovery, you can find it in android development or original android development-This also only if you don't have that already), factory reset from recovery, mount usb storage, copy rom to your phone, unmount, flash the rom, reboot into bootloader and flash the correct kernel found in the rom thread. This should work. I'll give you a hit when I get back tough.
Click to expand...
Click to collapse
Its bootloader is unlocked and it's rooted. Now for the recovery i found this:
http://www.teamw.in/project/twrp2/119
They say I should download the newest recovery img, access bootloader, select fastboot, plug the device into computer and run the command:
fastboot flash recovery recoveryfilename.img into command prompt right?

Yes its right. Then you boot into recovery, and mount usb storage and with the pc copy a rom into the sd card, then unmount, from the recovery go to wipe - > factory reset, once it's done go to install and select the zip of the rom. When it's done, go back to the home page of recovery, and from there press reboot bootloader. Now do fastboot, and from the pc, put kernel in fastboot folder (the same place where you put your recovery to flash it), open cmd and type fastboot flash boot nameofkernel.img, wait for it to complete, reboot and enjoy!

mr_nooby said:
Yes its right. Then you boot into recovery, and mount usb storage and with the pc copy a rom into the sd card, then unmount, from the recovery go to wipe - > factory reset, once it's done go to install and select the zip of the rom. When it's done, go back to the home page of recovery, and from there press reboot bootloader. Now do fastboot, and from the pc, put kernel in fastboot folder (the same place where you put your recovery to flash it), open cmd and type fastboot flash boot nameofkernel.img, wait for it to complete, reboot and enjoy!
Click to expand...
Click to collapse
When I type "fastboot flash recovery recoveryfilename.img" into the command prompt..it tells me:'fastboot' is not recognized as an internal or external command, operable program or batch file

Have you downloaded the fastboot folder? And have you located it in cmd?

lddangsta said:
When I type "fastboot flash recovery recoveryfilename.img" into the command prompt..it tells me:'fastboot' is not recognized as an internal or external command, operable program or batch file
Click to expand...
Click to collapse
i think you'll be better off flashing recovery by the all in one toolkit

mr_nooby said:
Have you downloaded the fastboot folder? And have you located it in cmd?
Click to expand...
Click to collapse
I have a folder named Android an there's: adb.exe, AdbWinApi.dll, fastboot.exe, Unlock_code.bin
Do you mean this?

Yes, now create a folder on the desktop called fastboot and copy those files in that folder. Then in cmd type cd desktop (enter) cd fastboot (enter), put the recovery in that folder, connect the phone on fastboot usb and type the recovery command

adb sees phone when off but not when it is in hboot or recovery

If the answer to this is out there I am sorry TRUST me I have been searching. I have a phone a customer brought to me he tried flashing a rom and forgot to flash the boot.img, now it just sits at the HTC splash screen. I can see the phone when it is off but can't push any files to it via adb. When the phone is on no matter where I am in the recovery I can not see the phone in adb. If I leave it on the splash screen I am also not able to see it. PLEASE HELP
Daniel
AK Repair Guy

Keep the power button + volume down button pressed as long as it takes to see the bootloader, plug the phone into the pc (and use the original usb cable and a usb 2.0 port)
Then try to fastboot it
Fastboot devices (if a serial pops up its oke)
You don't really need adb to fix a hox !

Mr Hofs said:
Keep the power button + volume down button pressed as long as it takes to see the bootloader, plug the phone into the pc (and use the original usb cable and a usb 2.0 port)
Then try to fastboot it
Fastboot devices (if a serial pops up its oke)
You don't really need adb to fix a hox !
Click to expand...
Click to collapse
I am waiting for the phone to grab a charge again it died overnight. I have done what you mentioned but I was using a USB 3 port. Will that make that much of a difference? I just need to be able to get files on it so I can get it back for my customer.
Thanks Again
Daniel
AK Repair Guy

Yes in some occasions it makes a very huge difference, usb 3 ports seems to have a bad relation with fastboot.
And files to the phone can be copied via the latest custom recoverys, mount it as a usb storage device inside it and it will pop up as a diskdrive on the pc !

Push the right boot.img to adb tools folder and flash it with fastboot flash boot boot.img
Not sure if you know...only wrote it to make this complete
Sent from my HTC One X using xda app-developers app

Alex-V said:
Push the right boot.img to adb tools folder and flash it with fastboot flash boot boot.img
Not sure if you know...only wrote it to make this complete
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
LOL :good: :laugh:
Edit :
You forgot fastboot erase cache
Not sure if you know...only wrote it to make this complete

Mr Hofs said:
LOL :good: :laugh:
Edit :
You forgot fastboot erase cache
Not sure if you know...only wrote it to make this complete
Click to expand...
Click to collapse
Hehe
Sent from my HTC One X using xda app-developers app

can't go to recovery,help me,check last page for update

unlocked htc one x
try to install new ROMs without wipe
and my phone keep restarting
try to go to recovery TWRP,no luck,stuck at htc white screen

i did try this
amacrobie said:
Have found myself in a similar position, all the following assumes you're using windows as you desktop OS...
To double check your recovery is broken, get into fastboot mode (power on while holding volume down), use volume down to highlight "hboot" then press the power button to select. Then press volume down to highlight "recovery" and press power button to select. If that works, then recovery is fine, just go ahead as you normally would to recover the system.
If you can't get into recovery then you have a slight problem.
Since you can get the device into fastboot mode, the priority is to get it to talk to your PC. Get the device into fastboot (power on while holding the volume down button). Once you're into fastboot, plug in the USB cable and verify the connection to your device using the following command :
Code:
fastboot devices
This should show you a single entry for your device. If it doesn't show anything, then unplug the device, download the naked driver pack (available at http://forum.xda-developers.com/showthread.php?t=1161769) and unpack it into a sensible location. Plug the device back in, if it can't install software automatically or nothing appears you may have to use device manager to update the driver for the device. Find its entry in the device tree (it will probably be listed as an unknown device), RMB on its entry in device tree then select "Update Driver Software..." from the menu that appears, tell it to search automatically then point it at the location where you unpacked the naked driver pack. That should sort out any misconceptions windows has about not being able to talk to the phone.
Once you have fastboot access, you can reflash clockworkmod. You can obtain the latest version here : http://forum.xda-developers.com/showthread.php?t=1594819
flash from fastboot using the command
Code:
fastboot flash recovery recovery-clockwork-touch-5.8.4.0-endeavoru.img
Once flashed, unplug the usb cable.
Use the volume up and down to highlight "hboot" on the fastboot menu, then press the power button to select. Once in the hboot menu, scroll to the "recovery" menu item and press power again to select. You should find yourself in familiar territory at this point.
hth
EDIT : Sorry, it's nearly 2am here, I'm very tired and I've just re-read your initial post. If you've flashed a custom kernel then you MUST have fastboot access (or it's subsequently broken). Download your ROM (if you haven't already got a copy on your PC) and extract boot.img from it. Get into fastboot mode (vol down + power on) and plug into your PC. Do the following :
Code:
fastboot flash boot boot.img
fastboot erase cache
Unplug USB cable, use vol up/ down to highlight "REBOOT" then press power to select.If you get stuck in a bootloop, you can try going into recovery via fastboot (select "hboot" from the fastboot menu then "recovery" from the hboot menu), then select "erase cache", then go to "advanced" and "wipe dalvik cache". Then go back and reboot the device. See if that helps. If not, then go back to recovery using the aforementioned method and re-install your rom, then erase cache and wipe dalvik cache.
Click to expand...
Click to collapse
but i dont understnd the command part,where to type the command?

Cmd..
Navigate to your fastboot folders.. these are the basics. Else have a look in the general section there's a good thread that explains all
Sent from my HTC One X using xda app-developers app

photofast said:
i did try this
but i dont understnd the command part,where to type the command?
Click to expand...
Click to collapse
In bootloader...Vol Down + Power.
Select fastboot.
Plug in USB.
It says it right there...
"Since you can get the device into fastboot mode, the priority is to get it to talk to your PC. Get the device into fastboot (power on while holding the volume down button). Once you're into fastboot, plug in the USB cable and verify the connection to your device using the following command : "
Bootloader is also where you boot recovery from, instead of selecting Fastboot, select Recovery...
And installing a new custom ROM, definitely wipe.

Stefan0vic said:
Cmd..
Navigate to your fastboot folders.. these are the basics. Else have a look in the general section there's a good thread that explains all
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
command promt?
'fastboot' is not recognized as an internal or external command,
operable program or batch file.
Click to expand...
Click to collapse

Tigerlight said:
In bootloader...Vol Down + Power.
Select fastboot.
Plug in USB.
It says it right there...
"Since you can get the device into fastboot mode, the priority is to get it to talk to your PC. Get the device into fastboot (power on while holding the volume down button). Once you're into fastboot, plug in the USB cable and verify the connection to your device using the following command : "
Bootloader is also where you boot recovery from, instead of selecting Fastboot, select Recovery...
And installing a new custom ROM, definitely wipe.
Click to expand...
Click to collapse
i can;t go to recovery,try bootloader>recovery,canot

photofast said:
i can;t go to recovery,try bootloader>recovery,canot
Click to expand...
Click to collapse
Well, bootloader>fastboot is where you run commands using Windows command prompt.

Yes command prompt, make sure you have the fastboot files.
Sent from my HTC One X using xda app-developers app

Tigerlight said:
Well, bootloader>fastboot is where you run commands using Windows command prompt.
Click to expand...
Click to collapse
ya
fastboot usb on phone
command pront on pc
this comeout after i type command
'fastboot' is not recognized as an internal or external command,
operable program or batch file.
Click to expand...
Click to collapse

Stefan0vic said:
Yes command prompt, make sure you have the fastboot files.
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
this right?
http://www.usofttech.com/t18218.html
http://d-h.st/23V

Stefan0vic said:
Yes command prompt, make sure you have the fastboot files.
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
ok,done installing htc driver using driver update device manager
now have "my htc"
i type fastboot at cmd,still
'fastboot' is not recognized as an internal or external command,
operable program or batch file.
Click to expand...
Click to collapse
help

Go here
http://forum.xda-developers.com/showthread.php?t=2277112
Setup the adb to allow your pc to communicate with your phone. Download from that link cause its most up to date
Sent from my HTC One X using xda app-developers app

Stefan0vic said:
Go here
http://forum.xda-developers.com/showthread.php?t=2277112
Setup the adb to allow your pc to communicate with your phone. Download from that link cause its most up to date
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
fuuuu
really hard to follow
can u pls guide me?
i have fastboot file for one x
download from here
http://www.guidingtech.com/10761/htc-one-x-rooting-guide-1-unlock-bootloader/
http://www.mediafire.com/?q2540u4g3v6qqd7
next what should i do?
really need your help

Stefan0vic said:
Go here
http://forum.xda-developers.com/showthread.php?t=2277112
Setup the adb to allow your pc to communicate with your phone. Download from that link cause its most up to date
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
can i use this tool
http://forum.xda-developers.com/showthread.php?t=1620755

All you need is to download and setup the sdk. If you're not sure how to you can look up a YouTube video! Sorry I'm on my phone its pretty hard to guide you right now
Edit: don't have any experience using that.. may be good idk
Sent from my HTC One X using xda app-developers app

Stefan0vic said:
All you need is to download and setup the sdk. If you're not sure how to you can look up a YouTube video! Sorry I'm on my phone its pretty hard to guide you right now
Edit: don't have any experience using that.. may be good idk
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
okay,downloading SDK with my 1mb internet now

Think I'm not allowed to post yt links but... This one seems alright.. just make sure you have everything up to date w ww.youtube.com/watch?v=Yc4z-KYypgY&feature=youtube_gdata_player
Sent from my HTC One X using xda app-developers app

Stefan0vic said:
Think I'm not allowed to post yt links but... This one seems alright.. just make sure you have everything up to date w ww.youtube.com/watch?v=Yc4z-KYypgY&feature=youtube_gdata_player
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
em bro
u have im so we can chat there?
that youtube video havae different sdk file leh

ok i manage to install recovery with fastboot
problem is,when i click recovery in hboot
phone will turn off,twrp boot screen come up,and phone turn off,and htc white screen come again,and stuck there
try with cwm,same thing happen
emm

will phone charge in boot screen?(htc logo white screen) or bootloader screen?
because my phone stuck there
maybe it turn off because low bet?