Voxer on GS3 with Cyanogenmod... - Sprint Samsung Galaxy S III

Hey all, I have noticed a trend on both my GS2 and now my GS3, it would appear that certain apps would have low mic volume after installing clean builds of either CM9 or now CM10.
Does anyone know if a fix or has anyone else encountered this specific issue?
Again, my mic is just fine, I even went back to a TouchWIZ based ROM to confirm this, it would appear that in CM ROMs for some 3rd party apps, in this case Voxer, that the mic is turned down extremely low.

And now the program will only produce audio via the earpiece with the MIUI ROMs, the mic is also EXTREMELY low. Does anyone have advice?

i was just about to post this! what's going on?

I'm really surprised by all the ppl that flash a ROM without reading through a thread...CM has disabled one mic, hence the audio being low. All other AOSP ROMs are based on CM, which is why they have the problem. There is no fix that I've seen as of right now. Either run a CM based ROM and have the problem or flash back to a TW ROM.
Sent from my SPH-L710 using xda app-developers app

pastert33 said:
I'm really surprised by all the ppl that flash a ROM without reading through a thread...CM has disabled one mic, hence the audio being low. All other AOSP ROMs are based on CM, which is why they have the problem. There is no fix that I've seen as of right now. Either run a CM based ROM and have the problem or flash back to a TW ROM.
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
where in the thread does it mention anything about a mic?

thegame2388 said:
where in the thread does it mention anything about a mic?
Click to expand...
Click to collapse
If you think I should track it down for you...
Posts:
5058
5079
5086
5087
5116
I'm sure there are others...

I have the same issue. Why in the world is the microphone disabled???

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from the Mars Rover.

Related

4.0.4 GPS issues

Has anyone else experienced issues with the GPS having a hard time locating after the update? It used to work flawlessly on 402 but now it's pretty much worthless.
Sent from my Galaxy Nexus using XDA
GPS has been normal for me since update. Just checked with the GPS test app and it located just fine.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Went into the app's settings > "Update AGPS" and it improved to this:
GPS fine here. And there.
Sent from my Galaxy Nexus using xda premium
GPS works fine for me here. I'm on stock 4.0.4 yakju rooted. I think GPS initialization is even faster than 4.0.3 (EBMod)
Fine for me too. Faster locking actually. Are you using a custom rom, kernel?
No, completely stock and not rooted. Maybe it's just my imagination, just seems like before the update it worked great and now it can't find me. Even did my update ota.
Sent from my Galaxy Nexus using XDA
tonis79 said:
No, completely stock and not rooted. Maybe it's just my imagination, just seems like before the update it worked great and now it can't find me. Even did my update ota.
Sent from my Galaxy Nexus using XDA
Click to expand...
Click to collapse
I too have found myself with the location problem... Maps Google+ Facebook location based features do not work. I have however noticed that when you switch down to 2G it locates fine. I dont know if its data stored in that partition thats causing it maybe, if any devs can chime in and the help would be greatly appreciated.
Rooted running latest Gummy rom and Baseband I9250UGLC1
Just an update after troubleshooting I stopped by a T-Mobile store and had my sim card replaced and that did it for me. Once its replaced make sure you cycle off and on a few times.
Sent from my Fox hound Nexus using XDA
Interesting, I'll have to try the new sim card thing. Thanks for the heads up.

Give me ideas!

Alright.... I'm working on a SUPER big project with hopefully some of the rest of my dev team (kantry123, finance.resat, mon5trum and rjshrjndrn). It's gonna be an AROMA rom with three cores... one from my rom, one stock and another I need some suggestions on. Also I am going to add some super epic Glass Widgets and themes. It's hopefully gonna be nice. Anyway, this thread is for YOU to...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
and help me with this!
This is for marvelc too?
Sent from my HTC_A510c using xda app-developers app
what about a bit of MIUI? or something more drastic like sony ericsson components?
A little bit Modified Miui Rom would be better then to much Sense roms. We have only 2-3 Miui Roms, why not more?
Sorry, it isn't, I don't have one, but after someone may change some of the installer files so that it has support for CDMA.
Noted. Good Idea, everyone likes the simpleness of MIUI (except me), but it will gain hits!
Will it be sense based? If not. I prefer Themed ICS.
touchwiz? not trying to be rude
sukhjit321 said:
Will it be sense based? If not. I prefer Themed ICS.
Click to expand...
Click to collapse
me too!!!!
To be honest... I think I'll make two bases sense and another cm7. you see, I want all the aroma mods to work with everything!
Built in beats audio might be good
Or maybe a built in Apps 2 sd tool as the wildfire s has limited storage afaik.
rymate1234 said:
Built in beats audio might be good
Or maybe a built in Apps 2 sd tool as the wildfire s has limited storage afaik.
Click to expand...
Click to collapse
Ok, just wondering, what does AFAIK mean?
As far as I know.
If this is cm10 based rom then maybe this touchwiz launcher can be included!!
http://forum.xda-developers.com/showthread.php?t=2009020
[Theme]Touchwiz 5 Launcher...
Sent from my Wildfire S using xda app-developers app

[Q] Vibration Issue

Since the day I flashed CM10.1, my vibrate has never worked. I didn't know if this was because of cm10, or because my phone was broken.. But I noticed that my phone still vibrates.. or sounds like it. It will vibrate enough for me to hear it, but not nearly enough for me to feel it. In fact, I can only hear it if it's completely silent. This makes me feel like it's because of CM10.1, but I can't see anywhere that anyone else has the same problem :/
Is there a way to make the vibration stronger? I want to try to revert it to the phone's GB state, but I have no idea how to do this, and I want to use CM10.1 regardless if vibration works or not, with all of my data, but I'm not sure how to use my "nandroid" backup to restore my data.. Any help please? Thanks
KooladeKC said:
Since the day I flashed CM10.1, my vibrate has never worked. I didn't know if this was because of cm10, or because my phone was broken.. But I noticed that my phone still vibrates.. or sounds like it. It will vibrate enough for me to hear it, but not nearly enough for me to feel it. In fact, I can only hear it if it's completely silent. This makes me feel like it's because of CM10.1, but I can't see anywhere that anyone else has the same problem :/
Is there a way to make the vibration stronger? I want to try to revert it to the phone's GB state, but I have no idea how to do this, and I want to use CM10.1 regardless if vibration works or not, with all of my data, but I'm not sure how to use my "nandroid" backup to restore my data.. Any help please? Thanks
Click to expand...
Click to collapse
Check under sound settings for vibration intensity. Or look under advanced device settings.
===================
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
BluesRulez said:
Check under sound settings for vibration intensity. Or look under advanced device settings.
===================
Click to expand...
Click to collapse
I just flashed 10.1 testing my Avatar port, and I turn mine completely off . But I think it's settings/advanced/haptic.
Sent from my SPH-D710BST using xda premium
i went to these settings, and i set intensity to 100%. Still, can't feel it

[Q] Gap between toggles and notifications.

So I noticed today that I have a gap that's really noticeable. Does anyone know how I would fix this without messing anything up badly? Running re-calked for jelly bean with agats 1.4.0 kernel modem is gb27 AIO is 4.4 by tdunham (spell check). Also have jellyverse blue toggles flashed over the 4.4 AIO.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from Tapatalk on my S2.
FuMMoD said:
So I noticed today that I have a gap that's really noticeable. Does anyone know how I would fix this without messing anything up badly? Running re-calked for jelly bean with agats 1.4.0 kernel modem is gb27 AIO is 4.4 by tdunham (spell check). Also have jellyverse blue toggles flashed over the 4.4 AIO.
Sent from Tapatalk on my S2.
Click to expand...
Click to collapse
I believe if you update to the latest ported 3 minit settings it will give you an option to reclaim that area'left by brightness slider.
Oh wow that's strange. When I rebooted it was normal again. You're right it was brightness slider but something caused it to crash since I do run it.
Sent from Tapatalk on my S2.
FuMMoD said:
Oh wow that's strange. When I rebooted it was normal again. You're right it was brightness slider but something caused it to crash since I do run it.
Sent from Tapatalk on my S2.
Click to expand...
Click to collapse
This has been happening randomly if you leave the slider active, a bug that hasn't been addressed as it hasn't been reported. I thought it was just me messing around too much lol.
Stryke_the_Orc said:
This has been happening randomly if you leave the slider active, a bug that hasn't been addressed as it hasn't been reported. I thought it was just me messing around too much lol.
Click to expand...
Click to collapse
Lol! Glad I'm not the only one then.
Sent from Tapatalk on my S2.

Need solution to microphone cutting out during calls on 4.4

I installed CM 11 VILLUMINATI a wile ago and everything was great, until i made a call. i would speak to the other end for a few minutes and suddenly they would stop hearing me as if i touched the mute button. i made sure that was not the case...it wasn't. i made sure the volume was all the was up thinking maybe that had something to do with it but it was max. finally i shouted into the mic and that worked and i was able to finish my call. i thought it was a fluke but then i received a call and the same thing happened to me, i had to yell just so the mic wouldn't turn off. i went into settings for the phone app and turned off background noise reduction and voice privacy (whatever that is) but the problem continued. i found that switching to speakerphone will keep the mic on and heard that switching to and from speakerphone also works but that is kinda annoying. i flashed MoKee thinking that it was a problem with CM 11 , that is the ROM i'm running now. but i still have the problem. on the Mokee forums i read that if i flashed the Extreme Kernel it might help so i did, it didn't. reading further into the thread it seems the Kernel is more trouble then its worth. i thought maybe its a hardware issue so i downloaded a voice recorder app and had a mock phone call for about three minutes, not once did the microphone cut out. iv tried re flashing dirty and clean to no avail. i just don't know whats going on iv hunted in the forums and have found no answer. most seem to not have the problem on the same version as i or others. i would post in the ROM thread but this will make my fourth post and it seems there is a minimum number of post one must make to be able to do that so im posting this here. in hopes of a work around...a fix..or at least a link to a thread were some helpful info would be.
Flash a TouchWiz ROM
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So this is a bug just with...whatever isn't TouchWiz. yea i don't know much about any of this.
I'm experiencing a similar problem. Did you find any resolution?

Categories

Resources