Related
http://www.proclipusa.com/brodit-de...t)/holder-with-tilt-swivel--511176-18252.aspx
http://www.proclipusa.com/brodit-de...-cigarette-lighter-adapter--512176-18252.aspx
http://www.proclipusa.com/brodit-de...ord-for-fixed-installation--513176-18252.aspx
http://www.proclipusa.com/default.a...d=&parent_category=4&d_pcat=13722&d_cat=18252
For those wanting a quality car mount, here it is. ProClip stuff is awesome. Its pricey but it works.
Completely worth it if you go with the fixed install.
I just ordered mine, I've always loved proclip.
Ordered!
I've been waiting for this bad boy to come out.
I wish that they would sell the basic holder without the swivel. I think that the entire mounting system looks much better without it. Oh well I'll just throw it in a box like I did for my G1 swivel mount.
I have a N1 ProClip holder somewhere around here. I need to see if I can figure out a way to mate it to a quality suction cup mount. If so, Ill get the Evo one.
do u guys know if the non-adjustable one works w/ the innocase II case? doesn't look like it, but figured i would ask....
this can be in landscape mode no problem huh? i should mention and it stays in landscape mode without any movement?
i bet this would work nice with an otterbox too...
hmmmmm
any videos anyone?
I dont think it swivels without leaving it loose.
I was thinking about it, but it us too expensive,i might just try a cheapo vent mount one to start
Sent from my HTC Evo 4G using XDA app
An alternative to Brodit/ProClip?
I'm sure this will work:
http://cgi.ebay.com/Car-Dash-Air-ve...80550909556?pt=PDA_Accessories#ht_1166wt_1137
Yeah, it's for an HD2 but it may work..the Evo is just a fraction of a millimeter thicker, but essentially the same dimensions. The holder is wide open so all the buttons are exposed including a hole in the back of the holder for the speaker/camera. Even if I have to mod the holder a little once I have it, for $7 and free shipping and it fits on a standard Nuvi mount, which I got rid of anyway now that I have the phone's better Navigator....I'll take a chance with it before spending over $50 for a product that does the same thing. Just my two cents.
It should be here in a couple of days, as I ordered it about 5 days ago....I'll let you all know how it works out.
Cheers
i guess im out of luck since im using the sedio rugger holster.
shad0w77 said:
do u guys know if the non-adjustable one works w/ the innocase II case? doesn't look like it, but figured i would ask....
Click to expand...
Click to collapse
the proclip one does not, but the slipgrip holder does. I took one of my old TP2 proclip mounts' ball joints and adapted to the slipgrip, its somewhere in the post where the slipgrip is reviewed in this forum
Mayonesa said:
i guess im out of luck since im using the sedio rugger holster.
Click to expand...
Click to collapse
Use the ProClip iPhone holder that they also suggest for EVO's with cases.
So I'm sure everyone has seen the DIY android car dock. There was a thread in here with someone wanting to make something similar (and me silently stalking it), but no one had found a suitable case to make the mount from. Well, I went on ebay and was able to find one, so here's some pics of the finished unit. Sorry there are no before pictures, I forgot to take them in my excitement.
The case cost me about $5. The other parts used were a garmin gps suction mount, the clip to hold a garmin gps, and some double sided tape. I simply used a dremel tool to cut off the ends of the gps clip to provide a flat surface, and attached it to the case with the tape. Looks somewhat ugly due to the clear case color(couldn't find a black one) but it works well, rotates, and looks good with the phone actually in it.
Well apparently I can't post external links(the images), but there's no way to upload the images here.
The USB ciggarette adapter
http: // imgur.com/WhHe1.jpg
The case/mount/tape
http: // imgur.com/ZRIQh.jpg
http: // imgur.com/qZ5Aj.jpg
http: // imgur.com/VJ5YJ.jpg
The phone mounted in my car:
http: // imgur.com/ZH5or.jpg
http: // imgur.com/TTowp.jpg
Linked...
The USB ciggarette adapter
http://imgur.com/WhHe1.jpg
The case/mount/tape
http://imgur.com/ZRIQh.jpg
http://imgur.com/qZ5Aj.jpg
http://imgur.com/VJ5YJ.jpg
The phone mounted in my car:
http://imgur.com/ZH5or.jpg
http://imgur.com/TTowp.jpg
Click to expand...
Click to collapse
Looks nice. How does the Captivate fit in the case, does it just snap in? I can't see how is it mounted it on the car... vent clip?
aloant said:
Linked...
Looks nice. How does the Captivate fit in the case, does it just snap in? I can't see how is it mounted it on the car... vent clip?
Click to expand...
Click to collapse
Thanks for posting the links. Yeah, it just snaps into the case. The gps mount I'm using is the suction cup mount as it fits nicely onto my stereo face. It's just a regular garmin gps ball mount clip that I cut the ends off. It's 2 pieces, the mount, and the clip part, so you can use it with the vent mount.
Nice job. Other than the tape, it looks good. This seems to be the mod of choice for DIY car docks. I don't see why manufacturers can't seem to make this a retail product. Just a snap-on/slide-in back plate with a ball cup on the back. Anyway, thats a nice way to take your captivate for a ride!
I would like to do the same thing but my concern is the fit of the case to the phone. I want it to be snug but remove easily without scratching/damaging from repeated use.
Do you feel confident that case will hold up?
If you do, mind throwing out a brand name or model number?
Shovelhead84 said:
Nice job. Other than the tape, it looks good. This seems to be the mod of choice for DIY car docks. I don't see why manufacturers can't seem to make this a retail product. Just a snap-on/slide-in back plate with a ball cup on the back. Anyway, thats a nice way to take your captivate for a ride!
I would like to do the same thing but my concern is the fit of the case to the phone. I want it to be snug but remove easily without scratching/damaging from repeated use.
Do you feel confident that case will hold up?
If you do, mind throwing out a brand name or model number?
Click to expand...
Click to collapse
My concern as well. I'd change up the mounting a bit for my car since there's a plate the previous owner mounted an XM radio head and I can't take it out without leaving an eyesore. If this can go there, my car will be /perfect/.
I'd actually prefer some sort of clear sleeve (think the "case" that comes with the N1) so that after I get my permanent case I don't have to snap it in and out of both, but if that's what it will take, I'll do it.
@Shovelhead84: Yeah, the tape isn't the best looking. I really wish the snap-on case was black, so you couldn't see it at all. It's kind of an eyesore in my mercedes without the phone in it, lol.
The case itself fits the phone pretty well, and it fits in pretty easy. It's not quite as easy to remove the phone, but still easy enough. I'm really not sure why no one is making docks like this either, all of the one's I've seen have been gigantic and ugly. I'm not worried about it damaging the phone, as the case only covers the back.
I'm not sure what the brand is since I got it off ebay, but here's a link to the exact one I bought.
http: //cgi.ebay.com/SAMSUNG-i897-CAPTIVATE-AT-T-SNAP-OEM-CASE-COVER-/350388879623?pt=PDA_Accessories&hash=item5194ce0107
BigJayDogg3 said:
My concern as well. I'd change up the mounting a bit for my car since there's a plate the previous owner mounted an XM radio head and I can't take it out without leaving an eyesore. If this can go there, my car will be /perfect/.
I'd actually prefer some sort of clear sleeve (think the "case" that comes with the N1) so that after I get my permanent case I don't have to snap it in and out of both, but if that's what it will take, I'll do it.
Click to expand...
Click to collapse
Yeah, it would be nice if the phone just slid into the case. Unfortunately all of the cases I've seen snap together around the phone, so this was the first one I found that appeared to even be useable for a car mount. Hoping I'll find something a little better later. This definitely works well enough for now though, and the price was hard to beat (I had the garmin parts sitting around from my gps I don't use).
phone damage
have you noticed any scratches or scuffs from taking the phone in and out often?
i am with you waiting on that sleeve type case like in that original video
epoplive said:
@Shovelhead84: Yeah, the tape isn't the best looking. I really wish the snap-on case was black, so you couldn't see it at all. It's kind of an eyesore in my mercedes without the phone in it, lol.
The case itself fits the phone pretty well, and it fits in pretty easy. It's not quite as easy to remove the phone, but still easy enough. I'm really not sure why no one is making docks like this either, all of the one's I've seen have been gigantic and ugly. I'm not worried about it damaging the phone, as the case only covers the back.
I'm not sure what the brand is since I got it off ebay, but here's a link to the exact one I bought.
http: //cgi.ebay.com/SAMSUNG-i897-CAPTIVATE-AT-T-SNAP-OEM-CASE-COVER-/350388879623?pt=PDA_Accessories&hash=item5194ce0107
Click to expand...
Click to collapse
How did you get the case for like $5? The listing is about $13
I just had a tinkering revelation and ended up making something in 30 seconds that i have been looking for for weeks.
Originally inspired by the car dock epoplive made as well as khaaan on Overclockers UK forums, I cut out the intermediary step of finding a case that the phone can snap in and out of easily. I ordered a suction cup mount for a Garmin Nuvi 205 off ebay for $4:
cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=270626403250&ssPageName=STRK:MEWNX:IT#ht_2572wt_1137
When I got it this afternoon, I took a look at the clip that is meant to hold the Garmin unit and thought that it looked quite close to the dimensions of the Captivate. Holding the phone in it, it was about 1/2" - 3/4" too wide. So I simply took a lighter, slowly and gently heated up the corners of the clip, and bent them slightly inwards. Out of luck, my guesswork bending resulted in a perfect fit. I added some thin sticky-back foam strips to make the fit more secure, and that's it!
The phone snaps in with purpose and is held in place even as I flail about testing it. It looks super clean, works well, was easy to make and cost a total of $4.
(The pictures were taken with my old E71x; when I find the charger for my point-and-shoot, I can get some better quality pictures up.)
Follow-up videos
For a little more detail and viewing angles:
http://www.youtube.com/watch?v=qcB3DQ8JKM0]
and my flail test, if any of you doubt how secure this is:
http://www.youtube.com/watch?v=igZ9sPxPG2k
Enjoy! I am happy to hear any criticism, answer and questions, etc.!
Nice! I'm doing one too!
Great mount.
I think you did a great job. I've been looking for one for a while. What if you have a silicon case? Would it still lock?
If so, you wouldn't need the foam.
stanggman75 said:
I think you did a great job. I've been looking for one for a while. What if you have a silicon case? Would it still lock?
If so, you wouldn't need the foam.
Click to expand...
Click to collapse
That was one of my first thoughts. I just returned my bodyglove case, but it seems like it would work just as well, you will just need to bend the clip just a little bit less to compensate. One thing I should tell you, you may need to modify the clip in such a way that the ridges that hold the device are further *out* to compensate for the added depth of a silicon case too.
Nice! Good job.
Nice! I may have to go get a new car clip to try this. It's kind of funny, because the first thing I thought about the clip was 'Boy, this sure is close to the size of the phone, if only it was just a bit smaller'.
Does the phone stay in when you rotate it?
Yes! I just drive for about a half hour on back roads with the phone in portrait and it didn't move one bit. Did you see my "flail test" video?
awesome!
Exactly what I was looking for.
I'm interested to see if someone gets this working with the bodyglove silicone case...
If i can find a Garmin dock for an acceptable price on Amazon or in person, then ill give this a try.
Great work guy.
Sent from my SAMSUNG-SGH-I897 using XDA App
Car Mount
If you are lazy like me have a look on Ebay. There is 1 for $7.99 shipped with battery charger.
BigJayDogg3 said:
If i can find a Garmin dock for an acceptable price on Amazon or in person, then ill give this a try.
Click to expand...
Click to collapse
So is ebay out of the question for you? There are plenty for sub-$3 on there.
I looked at Staples a couple weeks ago and they have just the ball joint and suction cup (no actual clip) for I think $14.99 - outrageous.
Awesome! I just order two. Thanks for the tip!
Does this scratch the sides at all from being clipped in and out so often or did you put foam on the clips where the phone would touch as well?
just ordered one... think i will pop off the ball joint and drill a screw through the center and attach to my pivoting blackberry 9700 proclipusa mount in my car. That way i got the pivot and it is mounted and not on the glass.
will update with pictures... will probably still order the proclip when it is released...
Surprisingly enough, it is out of the question. I've no credit card. With amazon i can use a coinstar to create gift cards. And in person i can use cash or a check.
Sent from my SAMSUNG-SGH-I897 using XDA App
penguin6 said:
Does this scratch the sides at all from being clipped in and out so often or did you put foam on the clips where the phone would touch as well?
Click to expand...
Click to collapse
No foam on the clips. The plastic is smooth, since it is where the gps would clip in. I don't see any trace of damage in the phone (and believe me, I would notice. Still babying this phone)
BigJayDogg3 said:
Surprisingly enough, it is out of the question. I've no credit card. With amazon i can use a coinstar to create gift cards. And in person i can use cash or a check.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
If you have a bank account, papal can use that.
Krad said:
That way i got the pivot and it is mounted and not on the glass.
Click to expand...
Click to collapse
I dont fully understand what you mean. Mounted on what glass?
Alternatively, i can be patient and wait for the promised pictures.
Tried a search but found no results.
Has anybody found a good in car holder which works with a case fitted to the phone???
Almost every product would fit with the case
sent from my 2.3.3|dxkg3 DJGalaxy S2
Declan79 said:
Almost every product would fit with the case
sent from my 2.3.3|dxkg3 DJGalaxy S2
Click to expand...
Click to collapse
Does that include the genuine Samsung mount?
TheOriginalTableLeg said:
Does that include the genuine Samsung mount?
Click to expand...
Click to collapse
From what i understand you'd need to have your sgs2 out of the case for the official samsung one. (can't verify that from personal experience)
I can't post links since i'm new here, but if you google "Omniholder" you'll find a universal mount that might suit your needs.
Sorry about not being able to provide a direct link!
Thanks for the reply, I have since found a post on here which recommends some car mounts.
The Exomount looks good.
Thanks again
I found one that works with case fitted!
I bought one that fulfills you needs from e-bay a few days ago. I can't post links, so search for "ulette10" member's items (I think no other seller offer this item), and you will find the holer soon.
I'm very satisfied with it, I tested with two different cases (a TPU and a rubbery one) and worked percfectly with both. Easy insert and not as easy remove (but not hard). Has a really goot suction feet and a ballhead for easy orientation.
And it's cheap, at least compared to original Samsung car holder (of course it's a passive one vs. the OEM is active - i.e. charges the phone, I think).
I just got the Brodit 511258 mount, which is designed to work with thin (e.g. TPU) cases. Seems to work pretty well with mine. Harder than hell to find -- no one in the US sells them, so I had to go to clove.co.uk.
I'm using mine with a Brodit SGS2 adjustable holder with phone in a Casemate Tough. Fit's nicely.
Many thanks to all of you for the replies.
I will look at all the suggested in car holders.
I can recommend the Breffo SpiderPodium. Works great and is more than just a car holder too
3waygeek said:
I just got the Brodit 511258 mount, which is designed to work with thin (e.g. TPU) cases. Seems to work pretty well with mine. Harder than hell to find -- no one in the US sells them, so I had to go to clove.co.uk.
Click to expand...
Click to collapse
Any chance of some pics?
I've been using Brodit for several years now but ended up buying the official Samsung car holder for some reason. Unfortunately, it'll require the removal of my Case Mate Tough Case each time, which may become tiresome.
So I may end up going down the Brodit route again, especially if the holder you refer to will accept the phone with a case on.
Winnergear asked me to do my mini-review on the Montar Universal car mount and I obliged . Being I do a lot of accessory reviews here to give back to the great XDA community, here is another one for ya. I know there's another thread about it, but I didn't want this post get buried in the thread so....
I got this yesterday and decided to do a day of testing before doing one of my reviews. I usually just pop the box open and post pretty much right away . But not this time! I was busy at work anyways lol.
First off, the box is the normal boxes that you see from time to time and it is a nice small frame box, but in transit, if not boxed, will be damaged in transit. The mount includes a mounting disk for your dash for even more sticky-ness. I already have one installed due to my old gps units.
When I first tried it out in the truck, I peeled off the protective cover of the adhesive sticky pad side, which is a lot like the Nexus Wireless charger backing. Once you feel it loses any tackyness, just wipe with a damp paper towl and it's magically refreshed. I placed it on my dash plate and it immediately stuck. Pushed down the lever to anchor it and this thing is not coming off! It will tear off my dash plate before coming off. Really impressive.
I currently have a Seidio Ledger flip case and was curious in how this universal would fare with it on. I thought, because of the grippy rubber red "teeth" it should grab and hold anything you throw at it. Was I right? Yep lol. Ok that is pretty cool. Using a flip case and placing the flap on the back or even have the hinge side of the case facing down and letting the cover flap open with gravity. Either way works and works well. The phone is not dropping from this device.
Before moving on, the base is nice and sturdy and the ball joint is maneuverable and can do a 360. Smooth operating. You just unscrew the area where the ball joint is and then adjust accordingly. What I usually do is just unscrew it just enough where it can move around pretty well and then when satisfied screw the joint adjuster until tight so the phone won't flop around. Another thing is that the grips open on both sides. So you can do a one handed mount. I have not perfected the one handed dismount yet, but that's fine lol.
Anyways, the phone is pretty much anchored where ever you place it. Overall, this a premium universal mount, if you can call it that lol. I can see this fitting many many type of cases without any issue. And the sticky mount is the best I have tried so far in the car. Can I recommend this? Well it is a premium device as I said, so the cost of the mount is around $35 USD. Not too high up, to me just at the top side of my range on what I would spend on a dash mount. Being this a really good one, I feel good recommending it to anyone that is willing to pay for what you get. A solid universal mount that will last past this N5 and many others IMO.
Pros:
Size is middle range.
Can pivot 360 so you can see your device at any angle.
Rubber teeth holds firm
Sticky pad is VERY sticky.
Cons:
Sticky pad can get dusty really really really fast.
Color is shiny gloss black like other car mounts I have used with the exception of the Xenomix brands which are matte black, but much more expensive. As a result, can get scuffed like mine is on the back side.
Wishlist:
Cord management
Or ability to house a wireless charger pad by an insert or different "grip".Not an engineer, sorry lol.
Recommend? Yes over any Arkon mount you can throw at it. For being that I can get it in the US pretty fast, I can recommend this. Will I stop using my Kenu Airframe? Probably not, but this is a great alternative.
Any questions, please ask away! Oh I'll be getting a Spigen SGP Neo Hybrid case where I can test with that on as well. I don't foresee any problems, but just a FYI.
Linkage
UK Amazon
http://amzn.to/1jEyJyn
US Amazon
http://tinyurl.com/kjy4e5d
Might be a strange question, but has anyone actually bought a Montar mount and received it? It seems like every review I have seen was when Montar has sent the person one to review. I tried to order one last year and I found a lot of negative feedback about the company claiming they never received their item or it took months for them to actually get it. I ended up buying a similar mount on Amazon. But yeah, just curious has anyone actually bought one from them and what was the service like?
EDIT: Sorry, disregard my post. I just saw your Amazon link. When I originally was going to order it it wasn't on Amazon but on their own site which is what was getting negative feedback.
I received mine long time ago ... Amazing mount , built to last ...
Nice review. Thanks
no doubt .. it's the best !
+1
Can you give us the measurements of the dock? I'm mainly after the height and also the max width of the grip. I have a 9cm mat that I want to mount if possible. Thanks!
Nice