I have flash my rom with RUU ultilities. It get error(132): Signarure error
It said please get the correct ROM Update too :sadly: i dont know how to solve the problem.
My phone buy from Taiwan, TW320e, Cid is 621. thanks if Anyonehelp
p/s: please help
Wrong Section, try this thread http://www.filefactory.com/f/0eafb9c43276c308/ second from the top.
I have done to this session
here is the log from fastboot:
c:\fastboot>fastboot flash recovery recovery_signed.img
sending 'recovery' (4372 KB)...
OKAY [ 2.638s]
writing 'recovery'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 3.134s
c:\fastboot>
tell me how to solve thing if you know. pressed the thanks
that recovery is of older ruu and if u updated ur fone to the latest 1 the bootloader has also been changed so older 1 cant work and sadly new ruu is not available.. soo if u ready to shell out some bucks then contact football
Sent from my One V
So out there no way to get back to stock rom now. Custom roms are good, but it suddenly unstable for now. may be 1 month or more. I just want to go back for stable and good battery. that is all i need for now. another help please?
Related
Hello there. I have small problem with s-offing my desire z.... what i done is that i unlocked the phone with Htcdev and flasheod cwm... then i left the phone in Poland... when i got it back I flashed the custom rom... but then i realized i forgot to s off it.... i tried numerous tutorials i managed t change version number to allow downgrade but i always fail when it comes to flash the official rom PC10IMG.zip file.... is there any way i can get it to work? (btw i assume that i dont have to root the device once the custom rom is rooted already) I used this guide
HTML:
http://forum.xda-developers.com/showthread.php?t=1178912
Code:
c:\vision>fastboot oem rebootRUU
...
OKAY [ 0.159s]
finished. total time: 0.160s
c:\vision>fastboot flash zip PC10IMG.zip
sending 'zip' (291447 KB)...
OKAY [ 49.308s]
writing 'zip'...
(bootloader) adopting the signature contained in this image...
(bootloader) zip header checking...
(bootloader) zip info parsing...
FAILED (remote: 99 unknown fail)
finished. total time: 58.565s
c:\vision>
Thanks.
You do need to root it, and you will also have to relock your bootloader first as htcdev unlocked hboot is nearly worthless. Find nipqer's guide and you'll be good.
Sent from my HTC Vision using xda premium
I was actually followin nipqlers guide but the problem seemed to be the unlocked boot loader i must have had skiped it.... anyways i reclocked the boot loader and it seemed to work thanks
where r the experts? really need help flashing "PJ46IMG_1.29.709.12.zip" stock rom
Folks, my RUU does not exist or leaked at all, after months of searching i managed to get its "PJ46IMG_ENDEAVOR_U_ICS_40_hTC_Asia_TW_1.29.709.12_Radio_1.1204.107.14_release_261362_signed.zip"
i have no USB-Y cable, and it's really hard to get it in my country.
so is there any workaround to flash this rom? plzzzzzzzzzzzzzzz
also please note that MY RUU DOES NOT EXIST at all common servers, unless if some one has it so may be he can share it to restore my mobile back to stock.
If that is truly a signed zip and the correct one for your device then do the following
Make sure you have plenty of battery and re lock your bootloader and have stock recovery
Boot to fastboot
Fastboot oem rebootRUU
new screen should appear with HTC logo
Fastboot flash zip nameofdownloadedfile.Zip
It will take a while to send and if the info all matches up your phone will perform the steps exactly the same as the ruu
Sent from my Nexus 7
it fails as shown below any suggestions?
D:\OneX\OneXStock>fastboot flash zip PJ46IMG.zip
sending 'zip' (598534 KB)...
OKAY [ 81.530s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 118.028s
ok then if there are no solutions for this signature verify error, would u please guide to to any location/link to get my RUU or to buy it if necessary, or maybe a higher RUU image version to be able to update, as mine is "1.29.709.12" my CID: 621, hboot: 0.95
My brother-in-law had his T-Mobile G2 (stock, never rooted) phone for about 2-years and just after coming back from his trip from Europe his phone turned on to the white HTC HBoot/Fastboot screen. He couldn't figure out how to get out of it, so he gave the phone to me.
I'm no expert with Android, more of a noob than anything else. But I want to get the phone to work as my 1.5-year and 3.5-year old boys need a phone to play with without worrying if they break-it. So I've spent about 10-12 hours playing with it, researching everything I could, but got really no where.
What I do know:
* Volume up/down rocker buttons do not work in the white screen
* The phone will recognize a USB connection
* The phone boots up in FASTBOOT mode, but can be forced in HBOOT (via volume down + power-key)
* I can get it to boot up in the OEM 2.3.1 stock BUT it seems like it's asking for a LOCK PATTERN that my brother-in-law can't get through. With enough attempts, it asks for his Google sign-in which doesn't work.
* I've made an attempt in flashing it with a clean PC10IMG ROM to no success:
C:\HTC\Android>fastboot devices
HT09VRxxxxxx fastboot
C:\HTC\Android>fastboot flash zip pc10img.zip
sending 'zip' (124928 KB)... OKAY [ 21.859s]
writing 'zip'... INFOsignature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 42.063s
C:\HTC\Android>fastboot flash zip pc10img.zip
sending 'zip' (124928 KB)... OKAY [ 21.781s]
writing 'zip'... INFOsignature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 41.922s
C:\HTC\Android>fastboot reboot
rebooting...
finished. total time: 0.375s
C:\HTC\Android>
I would appreciate any suggestions, as I'm tired of looking and searching through the forums with no help.
Thank you!
HBoot Screens...
I've attached the HBoot screens with and without USB connection... with the volume rocker not functioning.
Please note that the volume rocker does work when booted in the stuck OEM screen.
Your are safe because Hboot /fast boot is at your disposal, But you are S-ON, that means NO ROOT ACCESS NO RECOVERY! you cant even flash any custom ROM as far i know .. you can take your concern to this Forum Hope you get some Help from Demkantor http://forum.xda-developers.com/showthread.php?t=1983163 :fingers-crossed:
ahmedrzvi said:
Your are safe because Hboot /fast boot is at your disposal, But you are S-ON, that means NO ROOT ACCESS NO RECOVERY! you cant even flash any custom ROM as far i know .. you can take your concern to this Forum Hope you get some Help from Demkantor http://forum.xda-developers.com/showthread.php?t=1983163 :fingers-crossed:
Click to expand...
Click to collapse
S-ON... gotcha... thank you. I'll try it over there.
PiCASSiMO said:
S-ON... gotcha... thank you. I'll try it over there.
Click to expand...
Click to collapse
Not In typing, Thanks.. Hit the Thanks button if you want to thank someone
Hello everyone, I started to play around with all the diff things you can do with a rooted phone had plans for getting a custom ROM for my phone. Let me stat by saying that I am very new to all this.
I day ago i was getting ready to install the custom ROM for viper (ViperOneM8_1.7.1) reason being is coming from a htc one m7 with sense i wanted to get back to sense from my stock GPe m8.
I was able to unlock my bootloader and get my phone rooted I fallowed this video (How to Root your HTC One M8 - Full Guide) From Sakitech... or least I think im rooted still... I'll come back to you as to why I say "I think I'm rooted".
I thought it would be very simple just fire up the custom recovery and flash the ROM and sit back while it flashed, well everything went down hill from this point. Let me tell you what i did.
First i got to the custom recovery and I did a wipe I did advanced wipe and checked the boxes this is where I think I deleted the OS(after this I could not get back on the phone to do anything only will boot to recovery and it say no OS installed then asks if I want to get SuperSU installed this is where I already thought I was rooted but maybe on not??? I'm very confused about that
Then I used the sideload method to push the rom zip and try to flash the rom at this point I cant get it to flash. First I was getting the MD5 error I checked that off now it will just fail either saying error executing the binary from the zip or that zip is corrupted. (I tried re-downloading the ROM even from mirror link)
At this point I am very frustrated and feel helpless. I tried my best to keep from posting this and try to research to see if i can find the solution myself but I'm having no luck I have my days off from work to get my phone up and running or ill just have to go but another phone. At this point I really need some help. All I want is a working phone if i can get back to GPe stock that would be fine or make the ViperOne work.
Attempts to solve my problem: I tried flashing GPE4.4.3_m8.zip and other stock GPe ROMs nothing works
Thanks for reading and all your help I will sit nest to my comp and answer anything to try make everything as clear as possible. Thank you again
So I tried ViperOne again and it was starting to install but then fails. I searched around and I found that i need to have s-off to be able to install the ROM.
Can I get s-off from the recovery or bootloader/fastboot?
Demonwarrior said:
So I tried ViperOne again and it was starting to install but then fails. I searched around and I found that i need to have s-off to be able to install the ROM.
Can I get s-off from the recovery or bootloader/fastboot?
Click to expand...
Click to collapse
no offense, buy you need to read before you continue anything else.
rbouza1 said:
no offense, buy you need to read before you continue anything else.
Click to expand...
Click to collapse
None taken, I appreciate the reply and I will continue to do more research. Do you have any info I could use?
Demonwarrior said:
None taken, I appreciate the reply and I will continue to do more research. Do you have any info I could use?
Click to expand...
Click to collapse
Try this :
Do a full wipe in the recovery, install viper rom but do not choose to do a full wipe in the aroma installer. Once finished you flash the boot.img via fastboot and then reboot the phone.
You do not need s-off to flash custom roms. But the GPE thingy can be the problem....
Mr Hofs said:
Try this :
Do a full wipe in the recovery, install viper rom but do not choose to do a full wipe in the aroma installer. Once finished you flash the boot.img via fastboot and then reboot the phone.
You do not need s-off to flash custom roms. But the GPE thingy can be the problem....
Click to expand...
Click to collapse
I got the boot img from the ViperOne zip and ran the rom through sideload. what command do i run to flash the boot.img?
Code:
fastboot flash boot.img
?
also the ViperOne install failed said status 7 and some synlinks failed
Demonwarrior said:
I got the boot img from the ViperOne zip and ran the rom through sideload. what command do i run to flash the boot.img?
Code:
fastboot flash boot.img
?
also the ViperOne install failed said status 7 and some synlinks failed
Click to expand...
Click to collapse
fastboot flash img boot.img
---------- Post added at 06:28 PM ---------- Previous post was at 06:25 PM ----------
try that command, and what model did you have originally and did you convert to gpe or flash a gpe ROM.
gave me an error
Code:
FAILED (remote: signature verify fail)
Its a stock Google play edition I bought from the Google paly store, I didnt flash any other rom the ViperOne rom was going to be the first flash on the phone
Do you have an SD reader on your laptop? You can buy a big SD that you can put a small SD card inside it, then put the ROM zip file inside the SD card, after that plug it in your M8 and flash it via twrp.
Let me know if you couldn't understand any point cuz my English is not that good.
iHagbani said:
Do you have an SD reader on your laptop? You can buy a big SD that you can put a small SD card inside it, then put the ROM zip file inside the SD card, after that plug it in your M8 and flash it via twrp.
Let me know if you couldn't understand any point cuz my English is not that good.
Click to expand...
Click to collapse
I know how to push the rom trough adb to flash it thats not the problem the problem is that i cant get it to install properly. Thanks for the reply though i appreciate it.
Demonwarrior said:
I got the boot img from the ViperOne zip and ran the rom through sideload. what command do i run to flash the boot.img?
Code:
fastboot flash boot.img
?
also the ViperOne install failed said status 7 and some synlinks failed
Click to expand...
Click to collapse
Correct command is fastboot flash boot boot.img
status 7 means you don't have right recovery for that ROM
Also search about Stock GPE partition layout, is it same as normal non-GPE. I doubt it as I seen somewhere about people do full conversion to GPE, they need to reflash firmware to correct the partition for Sense ROM. This is what I understand from this thread : http://forum.xda-developers.com/showthread.php?t=2708589
ckpv5 said:
Correct command is fastboot flash boot boot.img
status 7 means you don't have right recovery for that ROM
Also search about Stock GPE partition layout, is it same as normal non-GPE. I doubt it as I seen somewhere about people do full conversion to GPE, they need to reflash firmware to correct the partition for Sense ROM. This is what I understand from this thread : http://forum.xda-developers.com/showthread.php?t=2708589
Click to expand...
Click to collapse
I have researched about the partition layout and I think you are right. How do i get the right partition layout? this is all a learning experience for me lol. I just hope i can get my phone working again.
In thats case then i might be worse off then i though my phone is s-on an there is no way for me to get it s-off in its current bricked state... to the the Ruu to install
correct me if im wrong but then what i have to do is just flash the stock rom for gpe beacuse since my phone was already stock GPe the the frieware(partition layout) will apcct it... right?
I want to thank everyone at the this point it looks like i have a lot of learning to do. Thank you
Demonwarrior said:
I know how to push the rom trough adb to flash it thats not the problem the problem is that i cant get it to install properly. Thanks for the reply though i appreciate it.
Click to expand...
Click to collapse
I know, but I told you this way in case that the adb didn't flash the whole zip file!
Demonwarrior said:
I have researched about the partition layout and I think you are right. How do i get the right partition layout? this is all a learning experience for me lol. I just hope i can get my phone working again.
In thats case then i might be worse off then i though my phone is s-on an there is no way for me to get it s-off in its current bricked state... to the the Ruu to install
correct me if im wrong but then what i have to do is just flash the stock rom for gpe beacuse since my phone was already stock GPe the the frieware(partition layout) will apcct it... right?
I want to thank everyone at the this point it looks like i have a lot of learning to do. Thank you
Click to expand...
Click to collapse
Follow the link in the post you quoted:
http://forum.xda-developers.com/showthread.php?t=2708589
You should really read carefully before doing stuff with your phone, especially when you are unexperienced.
If you are unsure about anything, ask before you try messing with something and hope that it will work.
You didnt, and now you have the mess.
But now even now you are not able to follow the instructions people are giving you.
In the post you just quoted there are instructions how to go from GPE to Sense and also back (#1 and #2 post)
j to the 4n said:
Follow the link in the post you quoted:
http://forum.xda-developers.com/showthread.php?t=2708589
You should really read carefully before doing stuff with your phone, especially when you are unexperienced.
If you are unsure about anything, ask before you try messing with something and hope that it will work.
You didnt, and now you have the mess.
But now even now you are not able to follow the instructions people are giving you.
In the post you just quoted there are instructions how to go from GPE to Sense and also back (#1 and #2 post)
Click to expand...
Click to collapse
I tried the instruction on the thread it didnt work... I think its because i have s-on
Code:
C:\Users\owner\Desktop\htc one\platform-tools>fastboot oem rebootRUU
...
(bootloader) Start Verify: 3
OKAY [ 0.058s]
finished. total time: 0.061s
C:\Users\owner\Desktop\htc one\platform-tools>fastboot flash zip RUU-HTC_One_M8_
GPE_4.4.4-2.12.1700.1_rooted.zip
target reported max download size of 1830617088 bytes
sending 'zip' (569179 KB)...
OKAY [ 19.483s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
FAILED (remote: 99 unknown fail)
finished. total time: 19.846s
C:\Users\owner\Desktop\htc one\platform-tools>fastboot flash zip RUU-HTC_One_M8_
GPE_4.4.4-2.12.1700.1_rooted.zip
target reported max download size of 1830617088 bytes
sending 'zip' (569179 KB)...
OKAY [ 19.484s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
FAILED (remote: 99 unknown fail)
finished. total time: 19.665s
C:\Users\owner\Desktop\htc one\platform-tools>fastboot flash zip RUU-HTC_One_M8_
GPE_4.4.4-2.12.1700.1_rooted.zip
target reported max download size of 1830617088 bytes
sending 'zip' (569179 KB)...
OKAY [ 19.479s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
FAILED (remote: 99 unknown fail)
finished. total time: 19.662s
C:\Users\owner\Desktop\htc one\platform-tools>fastboot flash zip RUU-HTC_One_M8_
GPE_4.4.4-2.12.1700.1_rooted.zip
target reported max download size of 1830617088 bytes
sending 'zip' (569179 KB)...
OKAY [ 19.478s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
FAILED (remote: 99 unknown fail)
finished. total time: 19.661s
C:\Users\owner\Desktop\htc one\platform-tools>fastboot flash zip RUU-HTC_One_M8_
GPE_4.4.4-2.12.1700.1_rooted.zip
target reported max download size of 1830617088 bytes
sending 'zip' (569179 KB)...
OKAY [ 19.458s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
FAILED (remote: 99 unknown fail)
finished. total time: 19.641s
C:\Users\owner\Desktop\htc one\platform-tools>
C:\Users\owner\Desktop\htc one\platform-tools>fastboot flash zip RUU-HTC_One_M8_
GPE_4.4.4-2.12.1700.1_rooted.zip
target reported max download size of 1830617088 bytes
sending 'zip' (569179 KB)...
OKAY [ 19.470s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
FAILED (remote: 99 unknown fail)
finished. total time: 19.650s
C:\Users\owner\Desktop\htc one\platform-tools>
The post says to try it a few times but still giving me the say error
Hey guys, so I recently got an S6 but was going to sell my m7 for a little extra cash. It had the purple camera issue tho so I was going to return it to stock and send it in for repair. I attempted to follow the return to stock thread but something went wrong. I started out bootloader unlocked via HTCdev and S-off. I thought I had successfully flashed the RUU and proceeded with command to go back to S-on. Well now I can only get to the bootloader. When I try to reboot it always brings me back to the bootloader. Currently it says Tampered, Locked, S-on and I can only do stuff through fastboot. I haven't been able to successfully flash anything from here. Anybody know if there's anything else I can do to get this phone running again? Appreciate any help
What firmware is the phone on? While in fastboot, it will tell you hboot version as well as the os version. If that doesn't work, do fastboot getvar all and post it here with imei and serial removed.
Thanks for the reply. It was on the latest firmware that Santod had posted. OS is 5.28.605.2
If you are on 5.28, the 4.4.3 ruu might work for you.
http://forum.xda-developers.com/showthread.php?t=2919442
EXE RUU VZW M7 4.4.3 S-on users
Sent from my HTC6500LVW using XDA Free mobile app
Uzephi said:
If you are on 5.28, the 4.4.3 ruu might work for you.
http://forum.xda-developers.com/showthread.php?t=2919442
EXE RUU VZW M7 4.4.3 S-on users
Sent from my HTC6500LVW using XDA Free mobile app
Click to expand...
Click to collapse
Whenever I try to use the EXE file I get a connection error. I'm not sure why, the phone's connected and I can still use fastboot. I have the latest HTC sync manager installed so the drivers should be good. If I try to just flash the RUU I get a signature error. Any other ideas that might work?
C:\Users\Rob\Documents\Android Devices\HTC One\Fastboot>fastboot oem rebootRUU
...
(bootloader) Start Verify: 3
OKAY [ 0.036s]
finished. total time: 0.036s
C:\Users\Rob\Documents\Android Devices\HTC One\Fastboot>fastboot flash zip DOTTA
T_VZW_M7_4.4.3_FUU.zip
target reported max download size of 1514139648 bytes
sending 'zip' (1439606 KB)...
OKAY [ 51.053s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 236.104s
C:\Users\Rob\Documents\Android Devices\HTC One\Fastboot>fastboot reboot-bootload
er
rebooting into bootloader...
OKAY [ 0.036s]
finished. total time: 0.036s
C:\Users\Rob\Documents\Android Devices\HTC One\Fastboot>
Rpowers308 said:
Whenever I try to use the EXE file I get a connection error. I'm not sure why, the phone's connected and I can still use fastboot. I have the latest HTC sync manager installed so the drivers should be good. If I try to just flash the RUU I get a signature error. Any other ideas that might work?
C:\Users\Rob\Documents\Android Devices\HTC One\Fastboot>fastboot oem rebootRUU
...
(bootloader) Start Verify: 3
OKAY [ 0.036s]
finished. total time: 0.036s
C:\Users\Rob\Documents\Android Devices\HTC One\Fastboot>fastboot flash zip DOTTA
T_VZW_M7_4.4.3_FUU.zip
target reported max download size of 1514139648 bytes
sending 'zip' (1439606 KB)...
OKAY [ 51.053s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 236.104s
C:\Users\Rob\Documents\Android Devices\HTC One\Fastboot>fastboot reboot-bootload
er
rebooting into bootloader...
OKAY [ 0.036s]
finished. total time: 0.036s
C:\Users\Rob\Documents\Android Devices\HTC One\Fastboot>
Click to expand...
Click to collapse
Dude first you have to extract the zip file then run the .exe file just read the instructions in the thread of that RUU. Happy Flashing
OK, I feel like an idiot. I've been trying so many different things to get this to work I copied the section of the command window that I knew wasn't right., however it is still not working. What I have done is extracted the zip from that thread and tried to flash the rom.zip file that was included in it. Unfortunately I still get a signature fail. When I try to use the exe program in that thread I get a USB connection error every time. Thank you both for your replies. It seems that thread is my only shot so I'm going to take my questions over there.