Related
Could some kind person point me in the direction of how to use CIF's (on DJ Droid 1.4, presume it's the same for every rom) along with Windows 7 to share a media folder?
I've (obviously wrongly), shared the folder in Windows, put in the network path, username and password and local path in the CIF's manager but it always fails to mount.
Many thanks.
I've worked it out now, in case anyone is interested, do not use the windows network name, instead do this:
Right click folder in Windows, select properties/sharing then click "Advanced Sharing", check "Share this folder" click ok.
Add the share in the CIFs manager with the windows box IP address and the folder, e.g.
192.168.1.2/Media
Use your windows username and password.
Job done.
what should be entered at Mount Point?
abc001 said:
what should be entered at Mount Point?
Click to expand...
Click to collapse
Any path on the phone. /sdcard/cifs/media works fine for me.
Sent from my HTC Desire using XDA App
Can someone explain how I would use this to access music on my home computer - I have a dns service so that I can remotely access the computer - using the built in htc music player, or is this not possible?
From what I understand, I simply share the folder (samba) in windows but how do I point my phone at that directory?
Chimp
Bump Would love this
Note: This will only work on your home Wifi network. If you want to make use of files from your home PC over 3G, you might want to use a VPN.
You'll need a rooted device and a custom kernel that allows CIFS. All AOSP ROMs use CIFS enabled kernels, but if you use a Sense ROM then you may need to install a newer kernel to get this to work (see the "all things Desire" thread in the "Desire Android Development" subforum for kernel options).
Install CifsManager from the market. Find the file 'cifs.ko' on your phone and make sure that the 'path to cifs.ko' in the CifsManager settings points to it.
You'll need to know:
- Your PC's IP address (i.e. 192.168.0.10)
- The name of the share you've created (i.e. Media)
- The name of the Windows user allowed to access the share (i.e. smeddy)
- The password of the Windows user allowed to access the share (i.e. 53cr3t)
In CifsManager, press menu, 'Add new share' and enter the above details. Press on the line in CifsManager with the red dot on the right. The dot should turn green. From now on, to use files from your PC on your phone, just open CifsManager and tap the share to connect.
You should now be able to access the files from the share on your PC as if they were located in /mnt/cifs/<share name> (if you have S-OFF) or /sdcard/mnt/cifs/<share name> (if you haven't).
I was thinking that a folder in the phone can be added as a share and accessed as a shared folder from a Windows 7 PC (the reverse of that mentioned here) using CIFs manager. Can this be done? If so can someone post detailed steps please?
No, as far as I know, that doesn't work yet.
What you'd need for that is an Android port of Samba. Some people over in the Android Software Development forums are discussing that, but I don't think it's working (yet). Edit: Apparently it is. See this thread for more information.
There are several FTPd's for Android in the market, though. That could do much the same thing.
@Cuchulainx
WOW! Thanks man. I was having trouble getting this to work. Couldn't seem to make a connection to my PC shares. Now with your help it works superb.
I can open word documents and excel spreadsheets on my phone from my computer and edit them with Quickoffice. Awesome.
Can also wirelessly transfer files from PC to phone. Cool.
Cheers mate. Clever boy!
great!!want to have a try, but don't know how to start~~
is there any way to get cifsmanager work with windows 7 which doesn't have a password? i get "I/O error" all the time.
Schaps has released the private beta TouchExperience and Windows Phone Device Manager....Maybe other developers can work with this program and make things happen even more than what we already have to work with.
Download
http://forum.touchxperience.com/viewtopic.php?f=30&t=783
Windows Phone Device Manager features:
Applications management: view, install/uninstall homebrew applications
File management: explore device, exchange files with your phone
Files & folders synchronization
Integration with Windows explorer
Send to Windows Phone (to send files, apps, ringtones, web links in one click)
Device backup (if MS allow it)
Device information
Add and manage custom ringtones
Send SMS, E-mail, notes directly from PC (without needing cloud services)
Shared clipboard with PC and phone
Programming sends notifications to phone
Initiate connection from PC or phone
Wireless connection support
Auto pairing (no need to enter PC or phone IP address)
Requirements:
Registred/unlocked Windows Phone 7 device
Windows Vista or Windows 7 32/64-bit
Windows Phone Developer Tools
.NET Framework 4.0
Julien Schapman's Apps for Windows Phone 7
TouchXplorer
Advanced Configuration Tool
Quick Settings
Registry Editor
Xbox Live Gamer Profile
You can initiate connection from both PC and device (tap PC Synchronization in TouchXperience to etablish connection from device). You can connect via USB or Wi-Fi, but the first time you have to connect via USB so WP Device Manager can deploy TouchXperience and your device can get your PC IP address.
In the current version you can't manually set the PC or phone IP address to connect, or change default ports.
Make sure port 8007 is not blocked by firewall on PC and port 8107 is reachable on device.
When WP Device Manager initiate a connection, if it can't connect to the phone, in case you are connected via USB it will launch TouchXperience, in other cases it will send a push notification to your phone asking you to manually launch TouchXperience
Some tasks requires that your phone screen is unlocked
It is not necessary to have Zune runing in order to use WP Device Manager.
If you have connection problems, try the following may help: unplug/replug your phone, close or start Zune, restart WP Device Manager, make sure your device is detected by Zune.
In order to use WP Device Manager from Windows Device Stage, you must have Windows 7 and driver signature verification disabled, unfortunately this is because Windows 7 recognize only digitally signed drivers.
Here is a registry fix for ppl having connection problems:
This thing doesn't work on all WP7 devices and is a pure HTC only app for the most part (good editable part)..On my DVP, the moment i connect the device, it crashes.
Neverthless, the developer has to get credit for the work he has done and support him.
Not sure what errors you may be getting when it crashes? It currently supports the following devices:
HTC HD7, HTC 7 Mozart, HTC 7 Trophy, HTC 7 Surround, HTC 7 Pro, HTC Arrive, HTC HD2, Samsung Focus, Samsung Omnia 7, Dell Venue Pro, LG Optimus 7, LG E900, LG C900.
I had connection problems when he first released to beta testers but that was at first...but all was worked out in the 2nd version..
lucasryan said:
Not sure what errors you may be getting when it crashes? It currently supports the following devices:
HTC HD7, HTC 7 Mozart, HTC 7 Trophy, HTC 7 Surround, HTC 7 Pro, HTC Arrive, HTC HD2, Samsung Focus, Samsung Omnia 7, Dell Venue Pro, LG Optimus 7, LG E900, LG C900.
I had connection problems when he first released to beta testers but that was at first...but all was worked out in the 2nd version..
Click to expand...
Click to collapse
wow, nice. works here on LG Quantum (C900). thanks for the post.
edit: Capture only works within TouchExperience, not when I go out of it to the phone's native menu. in fact, it disconnects the phone when I do that (by design?).
when i install it says i need version 1.3.2 to connect. then one to download is 1.3.0
derausgewanderte said:
wow, nice. works here on LG Quantum (C900). thanks for the post.
Click to expand...
Click to collapse
my LG Quantum C900 has some messages that come up like:
unable to launch TouchXperience
and when i launch it manualy i get:
TouchXperience version 1.2.3.0 or later is required
tried all the restart/reset stuff, nothing is working. did you have to do anything with yours?
edit: Capture only works within TouchExperience, not when I go out of it to the phone's native menu. in fact, it disconnects the phone when I do that (by design?).[/QUOTE]
Go into settings and enable multitasking, then you should be able to capture
gregrey said:
when i install it says i need version 1.3.2 to connect. then one to download is 1.3.0
Click to expand...
Click to collapse
If you are not able to connect or if some features are not properly working, go to Settings in WP Device Manager, click Restore default settings and restart your PC...Also try delete touchexperience from phone then reconnect to pc and let it download and install it again to device to try get error about 1.3.2 as the current version is 1.3.0 for public release and beta testers is 1.3.2 i do believe ...sometimes it trys to look for updates and gives error, but all should be fine within the program after that error.
lucasryan said:
Go into settings and enable multitasking, then you should be able to capture
Click to expand...
Click to collapse
that is not available, attached is what I have under settings.
derausgewanderte said:
that is not available, attached is what I have under settings.
Click to expand...
Click to collapse
It's not there, go to the main menu (the one with PC Connection, Airplane mode, etc) tap the menu title and a menu will appear, tap settings and enable multitasking from inside there.
notebookgrail said:
On my DVP, the moment i connect the device, it crashes..
Click to expand...
Click to collapse
I was having this same problem and here is a great tip that might save some of you headaches.
1: If you are on windows x64 go grab a program called EasyBCD Install it and in the advance settings go to advanced and tick the box that says "Allow installation of unsigned drivers in x64"
2: Remember to install the windows phone developer tools if you haven't already.
3: Turn Zune on before loading the program and Run The Device Manager as Administrator.
Program does not crash and works great with my HTC
bubbl3 said:
It's not there, go to the main menu (the one with PC Connection, Airplane mode, etc) tap the menu title and a menu will appear, tap settings and enable multitasking from inside there.
Click to expand...
Click to collapse
ah, talk to a beginner. thanks for this. wasn't obvious to me to tap that (although I am used to on my Zune ).
It must have taken the phone a while to adopt the settings. After a minute or so it was working. Thanks again!
how is the multitasking support? Does it work pretty well?
Nice ale broken -
Hi all,
I have a problem with the Samsung Omnia 7th
Repeatedly that you want me to version 1.3.2.0. File Explorer does not work, I do not load or information about the device tested on multiple devices ...
I hope to fix it
Also not able to launch TouchXperience, nor connect to my Quantum, even after a restart.
Works perfect on my E900
Wowwww...nice ... ihave to try it
Wonderfull
malovani said:
Hi all,
I have a problem with the Samsung Omnia 7th
Repeatedly that you want me to version 1.3.2.0. File Explorer does not work, I do not load or information about the device tested on multiple devices ...
I hope to fix it
Click to expand...
Click to collapse
same here on hd7
malovani said:
Hi all,
I have a problem with the Samsung Omnia 7th
Repeatedly that you want me to version 1.3.2.0. File Explorer does not work, I do not load or information about the device tested on multiple devices ...
I hope to fix it
Click to expand...
Click to collapse
Make sure port 8007 is not blocked by firewall on PC and port 8107 is reachable on device.
When WP Device Manager initiate a connection and can't connect to the phone, in case you are connected via USB it will launch TouchXperience, in other cases it will send a push notification to your phone asking you to manually launch TouchXperience
Some tasks requires your phone screen to be unlocked
It is not necessary to have Zune runing in order to use WP Device Manager.
If you are not able to connect or if some features are not properly working, go to Settings in WP Device Manager, click Restore default settings and eventually restart your PC.
If you get a message "TouchXperience version 1.2.3.0 or later is required" it means Device Manager is not able to communicate with TouchXperience, to solve the problem, go to Settings in WP Device Manager, click Restore default settings and restart your PC.
Hi XDA geeks , pros and fans !
I'd like to start this new threadline concerning the freshly-appeared TCT MOVE handheld device marketed for the budget segment.As i understand it appeared in march or later this year and has quite good specs for the approx. 100 euro category.
Some details can be found on
http://alcatelonetouch.com/products/smartphones/move
Contrarily to some beliefs IT IS NOT a branded OT-908 ,rather a cosmetized one .It comes in black or silver / white , a bit heavy for it's size , and higher specs than the OT-908.
Concerning the hardware specs, i'll be coming back later with some accurate chipset and sensor details.For now
OS is Android Froyo v2.2.2.Looks like there will be official ROM updates,at the time being there is the OneTouch Upgrade v1.2 ,which downloads about 540 Mb chunked firmware files, and exits with error.
Memory is 512 Mb RAM , for user space is available about 300 Mb
512 Mb ROM flash, available to user about 160Mb.
SD card slot supports up to 32Gb MicroSD, the phone comes with a 2Gb one.
Camera is a 2.1Mpixel one.There is no secondary one,but the main camera is available for video calls,with Yahoo! Messenger i tested it myself.How to use it this way i will explain later.
GPS is amazing , if assistance software is used , the lock-on takes only seconds.
Sensors - linear acceleration sensor
- 3 axis orientation sensor
- 3 channel magnetic field sensor (digital compass)
- light sensor for illuminance detection
- optical proximity sensor , it seems not in use by operating system(or rather poorly)
Processor - 600 MHz Qualcomm ARMv6 compatible, min frequency is 122 Mhz, and deep sleep capability.Qualcomm MSM 7627 chipset
rooting ?
hi djada80.i should like to ask if you managed to root your phone ?
Yeah , it's quite simple.There are in the Android Market some free apps , i think the best which i also use is the one named Ginger Break.Just download and install it.Detailed usage info can be found here
http://forum.xda-developers.com/showthread.php?t=1044765
firmware upgrade
it seems that the branded ones somehow cannot be upgraded ! at this point i need assistance , so PLEASE , if there is anybody experienced in debranding Acatel smartphones, then YOU ARE MOST WELCOME !.I saw guys having problem with debranding T-Mobile Move , so let's DO IT !
cannot sync with windows
i cannot sync my tmobile move with windows.have a toshiba satellite c665 with win 7 .pls help !
connect phone to computer,enable usb tethering.install alcatel android manager on computer. Can be found here
alcatelonetouch.com/contents/download/T-Mobile_AndroidManager_2.2.1108.1645.rar
This should work,instead of Android Sync Manager WiFi ,the last has some issues with this phone ,do not use it.
Yahoo! messenger front camera
Contrarily to some beliefs THERE IS POSSIBLE TO MAKE VIDEO CALLS with front camera only on Froyo 2.2.It is quite simple:
1.) if you have any version of yahoo apps , remove them all
2.) install Y!Messenger v1.3.2 , the afferent audio and video plugin and
optionally Y!Mail v1.3.2
Nothing fancy with it , just works.Remember, DO NOT UPDATE from Market.
Might also check this,if it doesn't work
http://forum.xda-developers.com/showthread.php?t=1087769
remove bundled apps ?
Hi !
Is there a way to remove some of the unnecessary factory shipped apps ?
RE
Yes , there is. So the smart method vould be to remove them from phone memory , and eventually install it on SD Card , if they are (and they are) UNMOVABLE.
Or just leave them ,anyway a factory reset will restore all the shipped applications.
1.) [optional] install Android SDK with platform 2.2 , sdk tools and eventually drivers.Enable USB debugging on device.On PC launch command prompt and change directory to \Android\android-sdk\platform-tools\.Run command
adb shell pm setInstallLocation 2
This enables SDCARD installation by default.Prerequisits to have ROOT ACCESS.
2.) with RootExplorer simply delete unwanted applications from \custpack\apps\ on device.Optionally you can make backups.
3.) if you made backups , the backed-up apk can be used to be reinstalled , NOW ON SD CARD
Good luck.
RE again
A reboot of the device is required to cleanup the junk after a forced delete.Or it can be done manually , BUT USE CAUTION.
i have an alcatel move branded Cosmote Move, i like this phone very much but i`ve managed to brick it the second time, first time i bricked and took it to waranty, they reinstall the software free of charge, now it has the same simptoms (pass the carrier logo and get stuck to carrier animation) and i need to send it to waranty again. i dont manage to get it unbricked. i`ve root it with gingerbreak but this phone doesnt go to recovery mode. i`ve searched the internet and google it for hours, but nothing.
if anyone knows how to do it please tell me, in the user manual says hard reset vol - and power, get stuck whit touch buttons light up and screen black!!
thanks in advance
re Themaster
it's not a brick yet i suppose , though you didn't specify how you managed to "brick" your phone.a nice clean reflash would solve the problem , probably you deleted some system files while in root mode.again did you use root explorer or something similar ?
try a factory reset as it follows:
1.) turn off the phone
2.) press vol up and the power on and hold the buttons pressed for about 1 minute
3.) the phone boots up , android logo appears and then an animation with some sort of thrashcan or whatever
4.)wait until it finishes , then the phone shuts down automatically.power on the phone and it will be restored
Beware ,battery must be at least 70 % charged or kept in charger , NOT USB connected to PC.
This restores phone to factory state , but not all the applications from /custpack/apps
Best regards !
Useful Key Combinations
These keypress modes apply on a shut down phone
Hard Reset - reinstalls android core system from ROM , deletes user data and misconfig
key combo : vol up + power on long pressed until trashcan animation appears
Flash Mode - used for ROM update , useless momentarily
key combo: vol down + power on long pressed , black screen appears and touch buttons lit up
Root access , mount filesystem with root access ,DANGEROUS !
key combo : home + power on long pressed until boot
build environment under Ubuntu
Lately, there has been some problems setting up an Android build environment under Lucid Lynx, as i've seen many have been complained for the missing java5 jdk.
For Romanian users: seems to be a problem with the Romtelecom DNS servers , when adding Jaunty or Dapper repositories to Lucid.
Use Google DNS as alternatives 8.8.8.8 and 8.8.4.4.This works.
From what I've been able to determine. The move and 908(s) are the same hardware with with only cosmetic differences. Something is different in software, I've been unable to root my 908s with ANY tools I've found.
I was also unable to use ADB under windows. The handset apparently requires four drivers, I was only able to find three of them. I got the Alcatel tools to work, as well as tethering, but no ADB. i didn't have any such issues under Ubuntu, but without root it isn't helpful.
I could not locate a stock rom or source anywhere on the Alcatel sites, so I sent a GPL request, i'm waiting to hear back.
UPDATE
After a long night I managed to root my 908s. I'll write out the jist of it, but I was flying by the seat of my pants, fueled by caffeine and sleep depervation. DON'T consider this a HOWTO.
First off, to the best of my knowlage there is no one click solution as of yet. As I said before still missing the driver that makes ADB work in windows, and handset based solutions didn't pan out. A little reasearch showed that the OT-990 has the same chip/ram and ROM space as ours. The screen is bigger, and I don't know what board is in it, but on a hunch I figured it was close enough. So I went here: http://forum.xda-developers.com/showthread.php?t=1164391 in the hopes that some sort of combined effort in future ROM development would be possible.
Yes that's right folks its a guide to MANUALLY root you handset with ADB. So not for the faint of heart. I didn't have high hopes, as issuing ls -l on either the sqlite folder or data threw a permission denied. So blindly I tried to push psneuter, busybox and su to /data/local. I almost fell off my chair when it worked! from there I used psneuter to get ADB into root, and managed to get the su binary to /system/xbin, and Superuser into /system/app. Superuser was installed, but still no root. So I checked out Root Checker to see what was going on. There are three places that su typically lives; /system/xbin, /system/bin, and /sbin. So I tried to put su in those folders. I got it into /system/bin but sbin is mounted read-only. I did not remount any directories, as the instructions are lacking syntax (I'm a little rusty with advanced mounting commands). I think things are mapped a little differently anyway. I still did not have root on the handset, so I then fired up Superuser to see what it could see. It saw the su binary, even though it wasn't working right. Then I thought well if it can see it, then maybe it can update and fix it. Sure enough after running the update to su in Superuser, (drumroll please...) I had working root.
So that's my story so far, I'm gonna give Alcatel a week or so to reply to my request. Then we'll take it from there. (Hey it worked on Huewei right?)
If a real dev should come across this, feel free to jump in. Its a solid little phone and has the potential to work on a range of handsets.
Gratitude
Thanks snkiz for your attention ! I am pleased that someone 'heavy' noticed my efforts of dedicating this threadline to the newcomer ! Indeed a small little phone with potential , maybe in time we get it gingerbread , cupcake ( or whatever ),even wm6.5 or 7 ...
As of ADB drivers , i had ADB from the first by these steps:
1.) http://www.alcatelonetouch.com/contents/download/move upgrade 1.2 Setup.rar , package contains the drivers
Now i noticed that when i try firmware upgrade , the utility downloads about half a giga of *.bin files and then exits with 'download failed error'.
2.) installed Android SDK , platform tools and Google drivers (i am not sure if necessary), the 2.2 platform (api 8)
Under Win7 cmd in platform tools , adb shell , su and on device pops up 'unknown has been granted superuser rights' and voila! in cmd shell i have '#'.Previously installed Gingerbreak.
My device is a Cosmote Move.
Ya, no I got that file too. I think they are "consumer drivers" because like I said I got all the Alcatel tools running but on my win 7 one driver was still missing, and I have pretty good googlefu. effin hate windows, this is why. I'm by no means a "heavy" but I am comfortable in a Linux environment, that helps alot. As to you being able to get gingerbreak to work, i'd bet that comes down to carrier firmware.
---------- Post added at 06:53 PM ---------- Previous post was at 06:39 PM ----------
djada, seeing as your the op could you please re-tag the thread with the model numbers to make it easier to find? cosmote, 908, 908s, and qualcom should do.
perhaps a mod could move this thread to the android hacking forum where it can get the proper attention please?
ADB driver
Driver files are from WHATEVER.\android-sdk\extras\google\usb_driver\ , if does not install automatically , can be forced.Anyway Win$ux 7 detects ADB interface , installs some sh.t from windows update server , and you'll have an ADB interface in Device Manager (working or not).Try to force the google drivers.
On the other hand ,i'm sorry but dunno how to move the thread , maybe i should start a new one in
http://forum.xda-developers.com/forumdisplay.php?f=565&order=desc&page=552
Just looked at it and they don't have Alcatel
Mod
Just started workin on a Cyanogen build , if i manage to build at least a kernal img , maybe i can lure in the Koush guy from github.We are in need of flash , backup , recovery tools.Not as lucky as the Samsung or HTC guys ...
great feature does anybody goy it working on windows 7 and android 4.1.2 ? :silly:
video http://www.youtube.com/watch?v=HVvczhM5KxI :good:
Yeah the dude in the video have done it
posted by the Q Master, woepidooo
coolnessQ said:
Yeah the dude in the video have done it
posted by the Q Master, woepidooo
Click to expand...
Click to collapse
But does someone has the download files ?
Sent from gs3
gasb00st said:
But does someone has the download files ?
Sent from gs3
Click to expand...
Click to collapse
Might be find able via google
posted by the Q Master, woepidooo
coolnessQ said:
Might be find able via google
posted by the Q Master, woepidooo
Click to expand...
Click to collapse
only found it for windows 8 and i run windows 7
Try porting the app but that might give some errors
posted by the Q Master, woepidooo
Hi Guys... Please follow the link of the thread that I did for whom need to have how to get the side sync phone screen app installed on non-Samsung PC… hope you enjoy it!
http://forum.xda-developers.com/showthread.php?p=41243207#post41243207
yeah did found that thread but when installed can't find programm can't get it working on win 7
I found a semi-working app for non Samsung PCs, thanks to https://twitter.com/KashaMalaga
He posted the SideSync app, and a hacked SideSync.exe that runs on any PC, and they work on mu Compaq PC, but upon trying the connection with the SideSync app on my S3, it crashes (Force Close). I don't know if this is for all (bad hack of the exe), or it is my ROM (which is a stripped down version of Samsung EMD2, many bloatware removed, and many frozen useless apps)
While the Phone Screen Sharing works just fine, quite fast. no issues
mcbyte_it said:
I found a semi-working app for non Samsung PCs, thanks to https://twitter.com/KashaMalaga
He posted the SideSync app, and a hacked SideSync.exe that runs on any PC, and they work on mu Compaq PC, but upon trying the connection with the SideSync app on my S3, it crashes (Force Close). I don't know if this is for all (bad hack of the exe), or it is my ROM (which is a stripped down version of Samsung EMD2, many bloatware removed, and many frozen useless apps)
While the Phone Screen Sharing works just fine, quite fast. no issues
Click to expand...
Click to collapse
thanks man it works great on windows 7
sjg83 said:
Hi Guys... Please follow the link of the thread that I did for whom need to have how to get the side sync phone screen app installed on non-Samsung PC… hope you enjoy it!
http://forum.xda-developers.com/showthread.php?p=41243207#post41243207
Click to expand...
Click to collapse
i have installed it again and it seems to work fine now thanks !
Quick write-up:
First a YouTube video with the functions: http://youtu.be/HVvczhM5KxI
Links as posted by KashaMalaga on his twitter -> https://twitter.com/KashaMalaga
First link, full package: http://goo.gl/WcbGP
Second link, cracked sidesync: http://goo.gl/1RfeS
Extract both archives.
1. Open this folder from the first link: Side Sync 1.0.2.12 and execute the inst.exe file as admin. (Wait till its done)
2. Open this folder from the first link: Phone Screen Sharing 1.0.0.1 and execute the Chain_Install.exe file as admin. (Wait till its done)
3. Copy the file SideSync.exe from the second link and paste it in this folder C:\Program Files (x86)\Samsung\Side Sync
4. Of course overwrite
5. Grab your phone
6. Open Samsung Apps on your phone (Pre-installed on s3 en note 2 as far as I know).
7. Download Side Sync and Phone Screen Sharing (Both made by Samsung)
8. Go to settings -> Developer options -> Slide top right slider to on position -> Check Usb-Debugging
9. Hook up your phone to your pc (Wait a minute for windows to install drivers and such)
10. Open Phone Screen Sharing app on your phone
11. Open Phone Screen Sharing on pc
12. Let Phone Screen Sharing on pc look for updates and such and follow instructions.
13. Everything should work now.
Tips:
Notice that you have two hidden arrows on the side of the phone preview on your pc. Top and bottom.
Top arrow hides functions like taking a screenshot and taking a movie. It also hides drawing and file manager.
The bottom arrow seems to have the equivalent function of holding the home button (Sort of a task manager)
You can re-size the preview phone, just grab it at the top left corner.
You can drag files from your pc to your phone preview. It will always ask if its okay to overwrite even though its a completely new file.
To be honest we are only using the Phone Screen Sharing app.
I couldn't get the Side Sync to work, which in my opinion is only handy if you have a dock for your phone.
I think the functions of Side Sync and the Phone Screen Sharing app are identical (Its just missing the backup function).
NOTES:
I opened both files as admin, I don't know if its necessary.
Also, I just wrote down what I did. Its up to you how you deal with those files and if you trust them.
Working on S3, Paranoid 3.15, Win7, but just the Screen Sharing one.
alternative app.
there's an alternative app with does the same job (well, almost the same job).
for those having issues getting sidesync to work, you might wanna give ShareKM a try. (google it, i can't post links just yet)
For some reason I can''t use Android File Transfer with my HTC One M8 - It just doesn't appear. The phone goes into MTC mode and says USB Connected, but ATP gives me the "No android device found" error?
Anyone else had the same error or have any other mac workarounds?
I can't stand HTC Sync Manager ...
I ran into the same problem yesterday.
All I could find on the internet was a post advising to reboot with the phone plugging in. That seemed to work but it was only a temporary fix. And a review mentioning the problem , that HTC had acknowledged it and that a fix was expected in late April.
mrdeviance said:
For some reason I can''t use Android File Transfer with my HTC One M8 - It just doesn't appear. The phone goes into MTC mode and says USB Connected, but ATP gives me the "No android device found" error?
Anyone else had the same error or have any other mac workarounds?
I can't stand HTC Sync Manager ...
Click to expand...
Click to collapse
FYI to everyone.. This is a Sense Only problem. MTP works fine on GPE ROMs. As a workaround, if you want to keep Sense, use AirDroid or something similar to transfer files to your phone via WiFi.
This was already asked in Q/A subforum -> http://forum.xda-developers.com/showthread.php?t=2714671
Here's my response :-
You will need ROOT and app called "DriveDroid"
Download Android File Manager - http://www.android.com/filetransfer/
Open DriveDroid app, give it root access and under its settings, change USB or Permanent USB mode to "Mass Storage Android Debugging"
Connect to OSX and open the Android File Manager app on OSX... next time you wont need to open it manually, it will open everytime you connect the phone.
This might break connection to HTC Sync though
(I use the above for my iMac)
Click to expand...
Click to collapse
BAM1789 said:
FYI to everyone.. This is a Sense Only problem. MTP works fine on GPE ROMs. As a workaround, if you want to keep Sense, use AirDroid or something similar to transfer files to your phone via WiFi.
Click to expand...
Click to collapse
I think it's not a solution, wifi transfer is really slow with big files. Plus, I own a nexus 7 and MTP is not that great either.
v-b-n said:
This was already asked in Q/A subforum -> http://forum.xda-developers.com/showthread.php?t=2714671
Here's my response :-
Click to expand...
Click to collapse
I did see that, but I don't want to root it just yet.
I thought there must be a simple native solution, but it doesn't look like there is until HTC do a fix!
Moderator information,
Thread moved to Q&A, also I deleted a post. Remember forum rules, swearing and the suggestion of swearing is against forum rules.
Ghost
Make sure HTC Sync Manager is not installed at all if you want Android File Transfer to work. This has been an issue in the past, although it doesn't sound like the issue here though. I personally don't have a problem using HTC Sync Manager to transfer my files, but if course I can see why people wouldn't want to use it.
I think the reason MTP is such crap on Macs is that Microsoft owns the license for the MTP protocol, and they let everyone use it except Apple, thus making Windows a more appealing OS. Just a theory though...
Sent from my HTC One_M8 using XDA Premium HD app
In http://forum.xda-developers.com/showthread.php?p=54035979 I may provide a partial solution; depending on your exact need. Look for the post I sent a few minutes ago. More to come in the next days; I will test other apps, and report.