Related
This should help a few people out. Thanks to dfgged, we now have stock Odin files. There has been minimal testing of these, but they do in fact work to help recover. It won't fix everything, but if you had to go back to stock for warranty reasons, this would be better than having a really messed up ROM. Currently, I only have the System and Kernel. Both are untouched, minus the System dump being rooted, which was required to get the dump. Flash in Odin via the PDA button. I will also work on getting the rest of the usable images posted, and will post a CWM flashable package for stock, stock deodexed, and debloated then as well for DJ20.
System
Kernel
So I flashed dl09 followed by both above and I'm still stuck at the Samsung screen...wtf?
If you have a Fascinate, why did you flash these files? If you have a Continuum, why did you flash DL09?
imnuts said:
If you have a Fascinate, why did you flash these files? If you have a Continuum, why did you flash DL09?
Click to expand...
Click to collapse
I have both. I needed to try something on the continuum with prl and modem modification to try and overwrite vzw pop settings. But now nothing on the continuum. And it doesn't appear to be any Odin backs...
jenisiz said:
I have both. I needed to try something on the continuum with prl and modem modification to try and overwrite vzw pop settings. But now nothing on the continuum. And it doesn't appear to be any Odin backs...
Click to expand...
Click to collapse
so you flashed verizon odin files on your continuum? that wasnt going to end well
nitsuj17 said:
so you flashed verizon odin files on your continuum? that wasnt going to end well
Click to expand...
Click to collapse
No kidding...but it has been confirmed that dl09 works on the continuum...however for somereason, not so well on mine.
jenisiz said:
No kidding...but it has been confirmed that dl09 works on the continuum...however for somereason, not so well on mine.
Click to expand...
Click to collapse
By confirmed do you mean "not at all confirmed"?
jenisiz said:
No kidding...but it has been confirmed that dl09 works on the continuum...however for somereason, not so well on mine.
Click to expand...
Click to collapse
where was it confirmed? i dont recall ever seeing that
jenisiz said:
No kidding...but it has been confirmed that dl09 works on the continuum...however for somereason, not so well on mine.
Click to expand...
Click to collapse
The only thing that is confirmed to work as far as going from the Fascinate to the Continuum are the radios. If you get a botched up baseband, you can flash a Fascinate radio to a Continuum (and probably the other way if we had Continuum radios, but we don't), but that is the only thing that is cross-compatible that I've seen. Maybe you could get most of a ROM to work as well, but you'd loose your softkeys as well as the ticker functionality if you didn't have the proper framework files.
nitsuj17 said:
where was it confirmed? i dont recall ever seeing that
Click to expand...
Click to collapse
Search...dl09 has been confirmed. I'd post links but its to much trouble on my phone. But I attempted and no go...still searching for ideas. Confused why I would be held up by the radio?
jenisiz said:
Search...dl09 has been confirmed. I'd post links but its to much trouble on my phone. But I attempted and no go...still searching for ideas. Confused why I would be held up by the radio?
Click to expand...
Click to collapse
I just searched the entire Continuum sub-forum, and there is no mention anywhere that DL09 from the Fascinate works on the Continuum. The only thing I found close was mention that the DL09 baseband works, but there is no mention of anyone using DL09 on their Continuum. I even searched at Android Central and Android Forums, and no one anywhere has flashed a full DL09 that is recorded at XDA/AC/AF.
imnuts said:
I just searched the entire Continuum sub-forum, and there is no mention anywhere that DL09 from the Fascinate works on the Continuum. The only thing I found close was mention that the DL09 baseband works, but there is no mention of anyone using DL09 on their Continuum. I even searched at Android Central and Android Forums, and no one anywhere has flashed a full DL09 that is recorded at XDA/AC/AF.
Click to expand...
Click to collapse
That's what I attempted? I flashed the band and no boot...not complete dl09
Edit: You and I actually talked about it through pm.
Flashing the modem doesn't cause the phone to stop booting, so something else is likely the problem.
jenisiz said:
That's what I attempted? I flashed the band and no boot...not complete dl09
Edit: You and I actually talked about it through pm.
Click to expand...
Click to collapse
you made it sound like you flashed the dl09 rom, thats where i was coming from on my comments
Nope...not the rom lol. I was going off of a convo in pm with nuts. I wish it was that obvious though...
hi everyone..
having an issue with this recovery...i have used this file twice before to recover the wife's continuum.. however last night it wouldn't work.. meaning, it flashes in ODIN just fine, gives me "success" however when the phone reboots, nothing has flashed and it is exactly the same as before flashing..
i have red cwm on the phone, and have tried clearing everything (cache, dalvik, data/factory reset, mounted all partitions and wiped those) i also tried flashing the kernel which seemed to work.. however it still will not reset to factory.. i used the same file i have on my computer that worked 2x before, and even re-downloaded the one posted here and tried that as well.. nothing..
it appears for some reason the phone accepts the connection and/or files, but won't "run" them if that makes any sense...
i also have 2 nandroid backups that i tried to restore, which is the factory setup..and it hangs at the samsung logo (i gave up after 20 mins and pulled battery) .. and the second nandroid takes me to the deodexed/basic rom that was built here.. which works but has issues..
im trying to get back to complete stock.. i have also tried using superoneclick to unroot, but the program gives me an "error 22" when pushing rage, and locks up..
i have tested adb, and it will connect to phone, but NOTHING can be pushed or pulled using the commands..
im lost here.. anyone have any ideas?
Did you convert the partition with voodoo?
Sent from my SCH-I400 using XDA Premium App
trailblazer101 said:
Did you convert the partition with voodoo?
Sent from my SCH-I400 using XDA Premium App
Click to expand...
Click to collapse
thanks for the reply sir..
i did not convert to voodoo...however i will check that in the voodoo section just to be certain its not toggled..im very familiar with voodoo, as i ran it on my fascinate for a long time .. i am using factory cable as well.. i will edit the post if it comes to fruition that it did..i never flashed a kernel - unless the one with the ROM here was voodoo..but i dont remember hearing sexy lady telling me anything when i flashed it
this is SO frustrating..it worked 2x before.. im assuming something is borked with r/w somewhere..but i havent a clue where to look to change it..
it boots to blue recovery, run update.zip to red..
under mounts and storage (that i cleared all on before) it currently reads all mounted except /dbdata which is unmounted..
Lmao, sexy lady...
When I get home, log into the Continuum irc channel, and lets see if we can't straighten you out
Sent from my SCH-I400 using XDA Premium App
any chance we can have the OP links updated, please, i tried downloading the files but links are broken
Here is the update that everyone has been waiting for At the moment, I'm only providing the modem, and rooted, stock, deodexed version of the ROM. There will be a cleaned up version to go along with all of this in due time, but we're currently working out some problems with it. I would like to note that despite this being the Froyo update, it is not without its own set of problems, and odds are you may never see another update outside of this from anywhere. However, the benefits of getting Froyo will outweigh the problems with it for most people, so have at it.
You will need a few things to get this, first, the downloads list here will be needed (obviously). You'll also need to have CWM setup and know how to use Odin. Heimdall will also work for those of you not on Windows, but I'm not providing any instructions for flashing using Heimdall. Also note that you will want to wipe data or perform a factory reset before booting into Froyo to avoid any problems. While you may get away with not doing it, you could end up with several problems, so my recommendation is to wipe data. Also, you can flash the ROM first, or flash the modem first, which ever you want to do. There isn't really a required order for it, as long as you do both parts.
[size=+1]Instructions[/size]
Download everything you need.
Odin
Froyo Radio
ROM+Kernel
CWM Kernel
CWM update.zip
Put the ROM zip and CWM update.zip on your SD Card
Flash the Radio via Odin in the PDA box
Enter CWM and flash the ROM+Kernel
Wipe Data in CWM before restarting your phone
Restart and enjoy Froyo
[size=+1]Downloads[/size]
Modem
ROM+Kernel
FAQ
How can I donate to you for this?
You can either click the "Donate to me" button above my avatar, or go through this link. Don't feel obligated to donate though, as Verizon should have given this to you (the users) long ago.
Can I still receive updates after flashing this?
You cannot receive updates after flashing this unless you revert back to DL17, which is the latest official software released by Verizon and Samsung.
If I can receive updates on this, how can I restore back to DL17?
I've been sending this to several people already that have had problems with their phones. If you need to revert back to DL17 for any reason, download this. You will need 7-zip or similar to extract it. Once you have the .tar.md5 file, flash it in Odin via PDA like you did for flashing the modem to get Froyo.
Can I return my phone to Verizon for warranty repair/service with this on my phone?
No. If you need any sort of help with your phone from Verizon, you will need to have the stock DL17 ROM on your phone. Anything else and you have voided your warranty and Verizon and/or Samsung will not have to do anything to help you. See the above question for a package to restore your phone to the latest stock software.
Are there any bugs in this release?
Yes there are, just as there is with any software. I do not know what the bugs are though off hand though as I have not been using this update. I also cannot say whether any of the problems you may have will ever get fixed, seeing as you can't even get a straight answer on why the update has been taking so long.
Is xxx modification/theme compatible with this?
Odds are that it isn't. All of the current themes and modifications for DL17 will not work on this package. They will all need to be updated to be able to work. Given that this is a relatively new release, this could take some time, especially given that it is the summer and people are on vacation (I'm looking at you trailblazer ). We will work though to try and get all of the mods ported from DL17 to EC03 so that you don't have to give up anything to upgrade.
Will you release a "clean ROM" based on this?
Yes, and it is already in progress. I have sent it out to a couple people already to ask for feedback and any issues. Once they say it is ok, I'll create a new thread with the cleaned up version. There is currently no ETA on when it will be released though.
Are there any other kernels I can use with this besides the one that comes with it?
At the moment, there isn't. I'm trying to get a custom kernel to work, but it has some problems. At the very least, we can customize the stock kernel some, but I do not know if a full source built kernel will ever be available.
Can I flash this if I am on the voodoo kernel?
No, if you are running the voodoo lagfix kernel, you will want to disable voodoo prior to doing anything. If you don't, you'll be in for some fun times with Odin getting your phone back in a usable state.
Can I get something included in the FAQ?
Yes you can. Just create a post with the following template, and I'll try to keep the FAQ updated. If I don't see it or add it right away, don't worry, I'll try and update it. If it has been a week or two and I still haven't responded, just send me a message with a link to what you want included. Here is the format to use:
Code:
[PLAIN][b]Question goes here?[/b][/PLAIN]
Answer goes here.
I'm getting ready to download it
When I go to flash the radio, Odin says it's an invalid image type
circa881 said:
When I go to flash the radio, Odin says it's an invalid image type
Click to expand...
Click to collapse
It should work You aren't extracting or renaming it at all are you?
Nope, not at all. I even downloaded it again just to make sure the first file wasn't corrupt
circa881 said:
Nope, not at all. I even downloaded it again just to make sure the first file wasn't corrupt
Click to expand...
Click to collapse
Your phone is in download mode when you're attempting to flash via Odin?
XD Now I feel like a ruh-tard. I forgot about that part
Wait, it's still saying invalid image type
I'm in shock... I'm on this forum every day and I missed this?! I'm going to install this and mess around with it. Ill post any bugs I find later this evening..
Kudos @imnuts for the effort!
Took about 7 minutes from download to phone setup. There was a short hang at the Samsung screen (approx. 15 seconds) but other than that it looks like it should. All startup animations are in tact..
I just gotta ask, its killing me... Where did this come from?
jaizero said:
I just gotta ask, its killing me... Where did this come from?
Click to expand...
Click to collapse
Does it really matter?
No... No it doesnt.. Its working perfectly by the way.. But Im sure you already knew that lol..
If jaizero got it to work, why couldn't I?
Sent from my SCH-I400 using XDA Premium App
---------------------------------
Jill plays tricks, Jack plays God
jaizero said:
Took about 7 minutes from download to phone setup. There was a short hang at the Samsung screen (approx. 15 seconds) but other than that it looks like it should. All startup animations are in tact..
I just gotta ask, its killing me... Where did this come from?
Click to expand...
Click to collapse
It came from heaven!!!
Sent from my Mind
^ lolololol
Sent from my SCH-I400 using XDA Premium App
FROYO
i think i love you (no homo)
I successfully loaded the ROM.
It hang a bit longer than usual on the verizon logo but after that no issues.
Thanks imnuts and anyone else that worked to make this possible.
Kay, how are people getting this to work when I couldn't get the radio flashed
Sent from my SCH-I400 using XDA Premium App
---------------------------------
Jill plays tricks, Jack plays God
Ok I dl'd both files, I have Odin1.3 both blue n yellow CWM update.zip but what is CWM kernal?
P.S. I totally love you guys and many thanks to nuts for confirming my faith in opensource and saving my phone
Sent from my SCH-I400 using XDA Premium App
Having a hell of a time getting my evo 4g to change to s on. I have successfully unrooted it but the s off remains there. I need to take it back to sprint for repairs.
I have tried several with the recent unrevoked 3. But my results are after flashing "waiting 5 seconds because windows hates" message and the other says waiting to reboot" (both freezes forever). Any direction would be appreciated.
Thanks you.
Newsflash. I've never heard one story of Spring checking a bootloader to make sure a phone is S-On.
Flash A stock ROM and you;ll be good, although there have been posts that say Sprint will work on Rooted phones now.
rosario04 said:
Having a hell of a time getting my evo 4g to change to s on. I have successfully unrooted it but the s off remains there. I need to take it back to sprint for repairs.
I have tried several with the recent unrevoked 3. But my results are after flashing "waiting 5 seconds because windows hates" message and the other says waiting to reboot" (both freezes forever). Any direction would be appreciated.
Thanks you.
Click to expand...
Click to collapse
Ignore this, double post. Next post.
rosario04 said:
Having a hell of a time getting my evo 4g to change to s on. I have successfully unrooted it but the s off remains there. I need to take it back to sprint for repairs.
I have tried several with the recent unrevoked 3. But my results are after flashing "waiting 5 seconds because windows hates" message and the other says waiting to reboot" (both freezes forever). Any direction would be appreciated.
Thanks you.
Click to expand...
Click to collapse
You have to have a custom recovery to do that (Amon-RA or Clockwork). You need to reinstall Amon-Ra Recovery by putting this in the root of your SDCard and rename it "PC36IMG.zip": http://files.androidspin.com/downloads.php?dir=amon_ra/RECOVERY/&file=PC36IMG.zip
Then flash this: http://downloads.unrevoked.com/forever/current/unrevoked-forever-son.zip
After that just run an RUU from here: http://goo-inside.me/supersonic/ruu
In case the RUU won't work from your computer, download one of the ZIP ones, put it in the root of your SDCard and rename it "PC36IMG.zip". That always works.
I am not sure what you mean by "Spring checking but I have flashed the stock rom PC36IMG.zip onto the root of the sd. My understanding that once your successful doing this you basically revert to the original rom. I have done that thanks to this site. But, I cannot for the life of me get the s on back on. Rooting my phone with three different custom roms were easier. Not all Spring stores like rooted phones. Id rather revert to original with the s on to be sure. product F thanks for the reply I will try that..perhaps I missed something. Thank You.
HipKat said:
Newsflash. I've never heard one story of Spring checking a bootloader to make sure a phone is S-On.
Flash A stock ROM and you;ll be good, although there have been posts that say Sprint will work on Rooted phones now.
Click to expand...
Click to collapse
That plus the leaked document from the sprint employee forums that said that sprint supports rooted devices means we don't have to fret over s-on for service just make sure that your phone is running a sense rom when it is taken in otherwise they can't use the diagnostic commands from the dialer to fully support the device.
Sent from my PC36100 using Tapatalk
s on
Well I think my biggest problem is that i unrooted my phone because Clocwork will not work for me to flash forever s on because it is unrooted. Is this correct? Thanks
rosario04 said:
Well I think my biggest problem is that i unrooted my phone because Clocwork will not work for me to flash forever s on because it is unrooted. Is this correct? Thanks
Click to expand...
Click to collapse
If you're using Clockwork, you have to disable Signature Verification.
s on
Product F(RED) said:
You have to have a custom recovery to do that (Amon-RA or Clockwork). You need to reinstall Amon-Ra Recovery by putting this in the root of your SDCard and rename it "PC36IMG.zip": http://files.androidspin.com/downloads.php?dir=amon_ra/RECOVERY/&file=PC36IMG.zip
Then flash this: http://downloads.unrevoked.com/forever/current/unrevoked-forever-son.zip
After that just run an RUU from here: http://goo-inside.me/supersonic/ruu
In case the RUU won't work from your computer, download one of the ZIP ones, put it in the root of your SDCard and rename it "PC36IMG.zip". That always works.
Click to expand...
Click to collapse
But to get clockwork to work you have to be rooted...correct?
Thank you
Yes but you're still s-off so follow those instructions.
Sent from my PG86100 using XDA Premium App
Thanks for staying with me. Appreciate it.
Here is how I wasable to get to recovery to get to the root directory for choosing zip from sd.
STEP 9: TURN OFF DEVICE
Power down the device by holding the Power Button for 2 seconds. Allow it to shutdown completely. Wait about 10 seconds before next step.
STEP 10: RECOVERY MODE
Hold down VOL DOWN + POWER until device boots into a White Screen.
Move to RECOVERY by using the VOL DOWN toggle and select by using POWER button.
STEP 11: TRANSFER PC36IMG.zip TO SDCARD
Connect the MICRO USB Cord. There is an option for this in both the Amon RA and Clockwork recovery.
Transfer the PC36IMG.zip to the ROOT of your SDCard.[/SIZE][/SIZE]
It was the connection and discnnection of th usb cable. Everything was in green. Is that normal.
So, my next step was to flash the forever s on zip. The results were unsupported radio version. Update failed. The current version I have is 2.15.00.05.02. on the new update on my evo. I tried it first by removing the pc36img.zip nd then tried it with it on...same results.
So I found this radio version (EVO_Radio_2.15.00.05.02_WiMAX_27243_PRI_NV_2.15_003), but I am not sure if this is what version is needed. Anyways, I apologize for this long everyone, but I am trying to provide as much info and hopefully I can minimize your time. Thanks alot.
rosario04 said:
.
...
So, my next step was to flash the forever s on zip. The results were unsupported radio version. Update failed. The current version I have is 2.15.00.05.02. on the new update on my evo. I tried it first by removing the pc36img.zip nd then tried it with it on...same results.
So I found this radio version (EVO_Radio_2.15.00.05.02_WiMAX_27243_PRI_NV_2.15_003), but I am not sure if this is what version is needed. Anyways, I apologize for this long everyone, but I am trying to provide as much info and hopefully I can minimize your time. Thanks alot.
Click to expand...
Click to collapse
The radio package you mention is the same radio you already have, so you'll want an older version. I'm not exactly sure of the version number, but I do know that is not the correct one.
Remember when you flash radios to not pull the battery. It'll flash, then upon rebooting it'll finish. You'll see a screen that you probably haven't seen before, it'll most likely be an arrow pointing down to a phone or an Android in a box... or something like that. Regardless of what you see after the flash, don't freak out and pull the battery - you'll end up bricking your phone. It's one of the few ways to guarantee a real brick, the phone will never turn on again. You may already know this, or it may be in whatever guide you're using, but it's good to know.
Anyway, I'll see if I can find the correct radio for you, and good luck!
Edit: I read somewhere that someone used this one to get s-on: http://www.mediafire.com/?v0ymbhaa0ltcvyy
However, you may need to do some trial and error. It should work, but here's a link to all of them: http://forum.xda-developers.com/showthread.php?t=715485
These are from Calkulin, so if they're PC36IMG files you'll be fine, but I'm pretty sure you flash them in recovery. Sorry, it's late & I'm lazy. Anyway, I think Calkulin still uses amend scripting, which will render them incompatible with ClockworkMod. You'll either need to switch to Amon Ra to flash them or find a different flashable zip. I think you'll only need to flash the radio, not all of them, but I could be wrong.
Sent from my PC36100 using Tapatalk
You don't need S-OFF to have sprint work on your phone for repair. My cousin just got an insurance replacement Evo 4g because he washed his phone with his clothes. He brought it over to me to be rooted and the phone he got was already S-OFF and that is an Insurance REFERB. also with the leaked forum of how Sprint will infact work on Rooted phones gives it away that you dont need S-OFF
Plainjane. Thanks for the info. I downloaded the zip from the first site you showed here and it ran well with the exception that it got stuck on formatting cache. So, I rebooted. s off still on. I will try the next one here in a few. Thanks everyone.
s on
well. While I continue to try and solve this puzzle I will attempt to attach this link on how to flash a radio to evo. i take no credit.
well i am happy to say i have finally go the s on back on. I believe the problem was that i left the recovery supersonic ra image on the root directory of the sd. i deleted that and flashed the supersonic s on image and voila!!! Everythin crumbled under the rosario wrath and s on is on. Thats Boricua power. My next problem is flashing sense back on. Khilbron, I wasnt ignoring your post on sense, it was just I was trying to get the other things done. So can you please expand on the sense. Thanks to everyone who took out the time even you kipkat with your kind of unfriendly comments. Dueces.
s on
rosario04 said:
well i am happy to say i have finally go the s on back on. I believe the problem was that i left the recovery supersonic ra image on the root directory of the sd. i deleted that and flashed the supersonic s on image and voila!!! Everythin crumbled under the rosario wrath and s on is on. Thats Boricua power. My next problem is flashing sense back on. Khilbron, I wasnt ignoring your post on sense, it was just I was trying to get the other things done. So can you please expand on the sense. Thanks to everyone who took out the time even you kipkat with your kind of unfriendly comments. Dueces.
Click to expand...
Click to collapse
i took my phone back to sprint and they replaced both speakers. now to root again.
Again. Want to thank everyone for their help.
I want to install the Blazer ROM (http://forum.xda-developers.com/showthread.php?t=1363071), but I'm new to rooting and flashing ROMs onto my device as this is my first Android device ever.
I was watching qbking77's video on installing the Blazer ROM, and he said that I needed CWM 5.0.2.7, but I believe he also said somewhere in the comments on some of his other videos that Rouge doesn't work as well as the (normal?) CWM 5.0.2.7? Is this true? Because I followed Zedomax's tutorial to root and install CWM and he uses Rogue, so I was wondering if this would mess with my phone at all.
Also, I heard that using the stock EL29 rom is usually unstable when installing ICS ROMs and that I should flash EL26 if I plan on using any ICS ROMs. Would it also be bad to try flashing the Blazer ROM without flashing an EL26 ROM and/or regular CWM or can I just go ahead and flash Blazer with my stock rooted EL29 E4GT with Rogue CWM 5.0.2.7?
Long story short: Can I just flash the Blazer ROM from stock EL29 Rooted with Rogue CWM 5.0.2.7 or do I need/should to do other things before attempting to flash this ROM? I've heard bad things about Rogue CWM and EL29 vs EL26 and regular CWM.
Thanks.
CWM won't be too picky, I have used standard cwm attached below and have not had problems with any flash so far, except CM9 {alot of people do, you will learn that}, anyway, follow OP install instructions and you will be fine, make sure to grab Calk's Format script in the OP. You should be on your new home screen in no time at all. If you get any FC's at first, try going back to CWM and Fix Permissions, Reboot and should be good.
KloudIX said:
CWM won't be too picky, I have used standard cwm attached below and have not had problems with any flash so far, except CM9 {alot of people do, you will learn that}, anyway, follow OP install instructions and you will be fine, make sure to grab Calk's Format script in the OP. You should be on your new home screen in no time at all. If you get any FC's at first, try going back to CWM and Fix Permissions, Reboot and should be good.
Click to expand...
Click to collapse
So I shouldn't need to do anything other than get standard CWM (aside from the OP's instructions, of course)? Also, how can I go about getting standard CWM and getting rid of Rogue?
And what is an "FC?" Sorry, I don't know all the terminology yet, but I read and watch a lot of videos daily about all of this stuff to try and learn as much as possible. His instructions just seem very vague for people that are new to rooting and installing custom ROMs.
organizedConfoosion said:
So I shouldn't need to do anything other than get standard CWM (aside from the OP's instructions, of course)? Also, how can I go about getting standard CWM and getting rid of Rogue?
And what is an "FC?" Sorry, I don't know all the terminology yet, but I read and watch a lot of videos daily about all of this stuff to try and learn as much as possible. His instructions just seem very vague for people that are new to rooting and installing custom ROMs.
Click to expand...
Click to collapse
Correct, download the file I attached, it has EL26, its rooted and the CWM is present - Make sure you do this with Odin 1.85, put it in the PDA position and uncheck the AUTO RE-BOOT option. You will then have to wait for it to Pass, but should only be a few seconds, unplug, pull bat and reboot holding Volume+ and Power.
FC= Force Close
They seem vague at first, but mainly due to alot of jargon your not familiar with yet.
Anyway, I hoped I helped you, if I did hit the thanks button.
KloudIX said:
Correct, download the file I attached, it has EL26, its rooted and the CWM is present - Make sure you do this with Odin 1.85, put it in the PDA position and uncheck the AUTO RE-BOOT option. You will then have to wait for it to Pass, but should only be a few seconds, unplug, pull bat and reboot holding Volume+ and Power.
FC= Force Close
They seem vague at first, but mainly due to alot of jargon your not familiar with yet.
Anyway, I hoped I helped you, if I did hit the thanks button.
Click to expand...
Click to collapse
Okay, and where can I find Odin 1.85? Or can I just use the exact same Odin program that I rooted with (using Zedomax's root method on SPH-D710 to root to stock EL29)?
And, let me see if I'm understanding this all correctly (please be patient with me ):
1. I run Odin 1.85
2. click PDA (I'm assuming is an option/button in Odin), and uncheck Auto-boot
3. select the EL26 file you included and click start(?)
4. wait for it to pass, then unplug the phone (should still be turned on at this point?)
5. pull bat (I assume you mean select the file for EL26 included in e4gtauto.zip Zedomax provided?)
6. reboot by going into CWM and selecting reboot.
Correct?
And I shouldn't have to do anything to delete Rogue CWM? Just these above steps?
organizedConfoosion said:
Okay, and where can I find Odin 1.85? Or can I just use the exact same Odin program that I rooted with (using Zedomax's root method on SPH-D710 to root to stock EL29)?
And, let me see if I'm understanding this all correctly (please be patient with me ):
1. I run Odin 1.85
2. click PDA (I'm assuming is an option/button in Odin), and uncheck Auto-boot
3. select the EL26 file you included and click start(?)
4. wait for it to pass, then unplug the phone (should still be turned on at this point?)
5. pull bat (I assume you mean select the file for EL26 included in e4gtauto.zip Zedomax provided?)
6. reboot by going into CWM and selecting reboot.
Correct?
And I shouldn't have to do anything to delete Rogue CWM? Just these above steps?
Click to expand...
Click to collapse
I am not sure where the 1.85 odin file is on XDA, but I have attached, below, still learning my way around here too.
SS= Screen Shot - See attached.
your steps are good, except I meant pull battery, not really necessary, but I usually forget to move my files to my sd card, so I end up pulling it anyway.
Once you get the PASS in odin, you will then hold in power for 8 seconds and hold Volume+ button at the same time {or pull battery and do same}.
That will put you into CWM, then go to install zip from SD > Choose Zip File from External SD, grab your Calkulin file, run it, then go back and run the ROM file and Reboot!
You should be good to go from there.
KloudIX said:
I am not sure where the 1.85 odin file is on XDA, but I have attached, below, still learning my way around here too.
SS= Screen Shot - See attached.
your steps are good, except I meant pull battery, not really necessary, but I usually forget to move my files to my sd card, so I end up pulling it anyway.
Once you get the PASS in odin, you will then hold in power for 8 seconds and hold Volume+ button at the same time {or pull battery and do same}.
That will put you into CWM, then go to install zip from SD > Choose Zip File from External SD, grab your Calkulin file, run it, then go back and run the ROM file and Reboot!
You should be good to go from there.
Click to expand...
Click to collapse
Alright, so after following the steps that you gave me, I just need to copy all of the files the OP posted onto my SD card and follow his steps?
Sorry I'm so bad at this, but I really do appreciate you being so patient with me. You're pretty much one of the only people that has actually attempted to help me with a question I've had.
One last question: I don't need to do anything to remove Rogue CWM before following your steps, do I? I didn't want to try anything until I was sure about this because I'm incredibly scared of bricking my phone as this is my first time ever doing anything like this.
Thank you so much for your help so far, though. I've thanked all of your posts along the way, and I really do appreciate it.
organizedConfoosion said:
Alright, so after following the steps that you gave me, I just need to copy all of the files the OP posted onto my SD card and follow his steps?
Sorry I'm so bad at this, but I really do appreciate you being so patient with me. You're pretty much one of the only people that has actually attempted to help me with a question I've had.
One last question: I don't need to do anything to remove Rogue CWM before following your steps, do I? I didn't want to try anything until I was sure about this because I'm incredibly scared of bricking my phone as this is my first time ever doing anything like this.
Thank you so much for your help so far, though. I've thanked all of your posts along the way, and I really do appreciate it.
Click to expand...
Click to collapse
Correct, once you flash the el26 file from above, Rogue will be gone, you will reboot to recovery, flash Calkulin, flash ROM, reboot, rejoice!
Not a problem, I understand how it can be frustrating, still waiting on an answer to my question I posted to the XDA.
Good luck and remember google is your friend too! Just search XDA and then what your looking for and you will likely get an answer somehow.
KloudIX said:
Correct, once you flash the el26 file from above, Rogue will be gone, you will reboot to recovery, flash Calkulin, flash ROM, reboot, rejoice!
Not a problem, I understand how it can be frustrating, still waiting on an answer to my question I posted to the XDA.
Good luck and remember google is your friend too! Just search XDA and then what your looking for and you will likely get an answer somehow.
Click to expand...
Click to collapse
It worked, thank you so much! I'm now enjoying this wonderful Blazer ICS ROM thanks to you.
I've "thanked" your post again, and I just wanted to say again how much I appreciate your help tonight. You have no idea how long I've been waiting to get help on all sorts of different ROMs (not necessarily here, but in other places - it's been about 2 and a half weeks and basically no one has replied to me other than Qbking once and Zedomax once), so once again, I thank you.
Cheers, friend! Good luck on your question, I'd attempt to help, but I clearly don't know much about Android. XD I wish I could help!
organizedConfoosion said:
It worked, thank you so much! I'm now enjoying this wonderful Blazer ICS ROM thanks to you.
I've "thanked" your post again, and I just wanted to say again how much I appreciate your help tonight. You have no idea how long I've been waiting to get help on all sorts of different ROMs (not necessarily here, but in other places - it's been about 2 and a half weeks and basically no one has replied to me other than Qbking once and Zedomax once), so once again, I thank you.
Cheers, friend! Good luck on your question, I'd attempt to help, but I clearly don't know much about Android. XD I wish I could help!
Click to expand...
Click to collapse
No prob! Glad its working for you. You're gonna be hooked.... you just get sucked in once you figure out a little bit.
My E4gT - Running: Paranoid Android v1.6 and L O V I N I T !
KloudIX said:
No prob! Glad its working for you. You're gonna be hooked.... you just get sucked in once you figure out a little bit.
My E4gT - Running: Paranoid Android v1.6 and L O V I N I T !
Click to expand...
Click to collapse
Haha, I bet. I'm already loving this ROM, the theming is really minimalistic, everything is stable, and I can just install Apex Launcher if I want the stock ICS experience. I'm here at my parents house for summer break, and I live in Florida for college. I don't really have access to a windows PC there since I have a Macbook Pro (courtesy of Full Sail University), and I didn't really want to deal with all the bs you have to go through on a mac to root the phone and stuff so I just waited for summer break, so getting your help this early in my break was amazing because this means I can try out other ROMs now that I know what to do if I feel so.
I'll be using your tutorial for the rest of my family's phones as well since they all got incredibly interested when I told them I could update the phone for them before Sprint did, haha. Plus, my mom loves the idea of the Wifi tethering for free, so she was pretty much sold the second I said that.
Thanks again! I already love Android 100x more than iOS (I'm coming from an iPhone) because of the ability to customize literally anything about the OS.
You are most definitely welcome, I would be more than happy to help in the future too, but do try Nova Launcher, its quite slick, easy to customize and I haven't seen a bit of lag out of it period.
Im posted up in my basement working, while the wife and kids sleep anyways.
KloudIX said:
You are most definitely welcome, I would be more than happy to help in the future too, but do try Nova Launcher, its quite slick, easy to customize and I haven't seen a bit of lag out of it period.
Im posted up in my basement working, while the wife and kids sleep anyways.
Click to expand...
Click to collapse
I'm using Apex right at the moment, but I've heard great reviews about Nova. I'll definitely try it out tomorrow when I get some time, and I have to set up the wifi network on this phone. We live a little outside the city here and the 3G/4G speeds get pretty awful in certain spots for them. Back in Orlando for myself, however, they're really fast.
But yeah, I'll definitely check out Nova. Maybe I can still refund Apex. XD
KloudIX - Thank you so much for your helpful replies in this thread! I'm attempting to help my buddy with flashing Blazer ICS on his stock Epic 4g Touch, and when I started researching this for him, it seemed to come with a lot of potential "gotcha's" and I didn't want to be the one to brick his device.
You made everything clear and I just wanted to thank you for that.
whoaboy said:
KloudIX - Thank you so much for your helpful replies in this thread! I'm attempting to help my buddy with flashing Blazer ICS on his stock Epic 4g Touch, and when I started researching this for him, it seemed to come with a lot of potential "gotcha's" and I didn't want to be the one to brick his device.
You made everything clear and I just wanted to thank you for that.
Click to expand...
Click to collapse
Have you gotten as far as rooting his phone yet? What "gotcha's" are you referring too, sorry for the delayed response. Been busy. Once you get him rooted follow the OP for Blazer Rom and flip back and forth through here if you have questions. Most of the "Gotcha's" that I am thinking of have been wiped due to sfhub's mods/fixes.
If u do insta) blazer, you'll love it. I've been using it daily. Has great performance and battery life
Sent from my rooted potato
I'm no stranger to rooting and flashing ROMs, but this is a new one on me. I've had my Virgin Mobile Siii for several months and am pretty happy with it. However, I want to go to CyanogenMod. I also want to root and put a custom recovery on my phone.
My first problem is that I put TWRP on the phone a month or two ago, but when I try to boot into recovery, all I see is the <e3> recovery. I have a TWRP folder with a copy of a Nandroid backup on it, so it must have been there, right? Anyway, to try to figure this out, I downloaded ROM Manager (free version). It says I have both TWRP and Clockwork recoveries on the phone, and trying to have it set me up to use or update either one goes nowhere. Superuser says I'm not rooted.
What I'd prefer to do is get a working root and TWRP recovery on the phone -- I've used it with both an EVO 4G and HTC One V I had in the past and I'm comfortable with it, though if I have to use CWM I can. Then I'd like to use the new CyanogenMod installer if I can be sure it's compatible with the phone. My baseband/build version numbers end with MG2, so I know the phone might be slightly different than a Sprint SIII, but from my exploring the forums here and on other sites it seems to be pretty compatible.
This uncertainty of whether or not I have a custom recovery on the phone makes me very leery of trying to flash a new one without a second opinion. Can anyone help or give me guidance on this?
EelResuah said:
Can anyone help or give me guidance on this?
Click to expand...
Click to collapse
Have you went here and used this method? I would first flash all that way back to stock unrooted on pc Odin to get rid of all the clutter. And if it were me, I wouldn't use ROM manager either. It says Sprint in the link, but everything is the same.
http://forum.xda-developers.com/showthread.php?p=34579827
Sent from my SPH-L710 using XDA Premium 4 mobile app
Gracias
jdsingle76 said:
Have you went here and used this method? I would first flash all that way back to stock unrooted on pc Odin to get rid of all the clutter. And if it were me, I wouldn't use ROM manager either. It says Sprint in the link, but everything is the same.
http://forum.xda-developers.com/showthread.php?p=34579827
Thanks, I will check this one out. The problem I often have is finding my way through a dozen or so threads that almost give me what I need, but this one looks pretty straightforward. I probably won't try it until the weekend, but in the meantime, thanks for the tip!
Click to expand...
Click to collapse