Here is the update that everyone has been waiting for At the moment, I'm only providing the modem, and rooted, stock, deodexed version of the ROM. There will be a cleaned up version to go along with all of this in due time, but we're currently working out some problems with it. I would like to note that despite this being the Froyo update, it is not without its own set of problems, and odds are you may never see another update outside of this from anywhere. However, the benefits of getting Froyo will outweigh the problems with it for most people, so have at it.
You will need a few things to get this, first, the downloads list here will be needed (obviously). You'll also need to have CWM setup and know how to use Odin. Heimdall will also work for those of you not on Windows, but I'm not providing any instructions for flashing using Heimdall. Also note that you will want to wipe data or perform a factory reset before booting into Froyo to avoid any problems. While you may get away with not doing it, you could end up with several problems, so my recommendation is to wipe data. Also, you can flash the ROM first, or flash the modem first, which ever you want to do. There isn't really a required order for it, as long as you do both parts.
[size=+1]Instructions[/size]
Download everything you need.
Odin
Froyo Radio
ROM+Kernel
CWM Kernel
CWM update.zip
Put the ROM zip and CWM update.zip on your SD Card
Flash the Radio via Odin in the PDA box
Enter CWM and flash the ROM+Kernel
Wipe Data in CWM before restarting your phone
Restart and enjoy Froyo
[size=+1]Downloads[/size]
Modem
ROM+Kernel
FAQ
How can I donate to you for this?
You can either click the "Donate to me" button above my avatar, or go through this link. Don't feel obligated to donate though, as Verizon should have given this to you (the users) long ago.
Can I still receive updates after flashing this?
You cannot receive updates after flashing this unless you revert back to DL17, which is the latest official software released by Verizon and Samsung.
If I can receive updates on this, how can I restore back to DL17?
I've been sending this to several people already that have had problems with their phones. If you need to revert back to DL17 for any reason, download this. You will need 7-zip or similar to extract it. Once you have the .tar.md5 file, flash it in Odin via PDA like you did for flashing the modem to get Froyo.
Can I return my phone to Verizon for warranty repair/service with this on my phone?
No. If you need any sort of help with your phone from Verizon, you will need to have the stock DL17 ROM on your phone. Anything else and you have voided your warranty and Verizon and/or Samsung will not have to do anything to help you. See the above question for a package to restore your phone to the latest stock software.
Are there any bugs in this release?
Yes there are, just as there is with any software. I do not know what the bugs are though off hand though as I have not been using this update. I also cannot say whether any of the problems you may have will ever get fixed, seeing as you can't even get a straight answer on why the update has been taking so long.
Is xxx modification/theme compatible with this?
Odds are that it isn't. All of the current themes and modifications for DL17 will not work on this package. They will all need to be updated to be able to work. Given that this is a relatively new release, this could take some time, especially given that it is the summer and people are on vacation (I'm looking at you trailblazer ). We will work though to try and get all of the mods ported from DL17 to EC03 so that you don't have to give up anything to upgrade.
Will you release a "clean ROM" based on this?
Yes, and it is already in progress. I have sent it out to a couple people already to ask for feedback and any issues. Once they say it is ok, I'll create a new thread with the cleaned up version. There is currently no ETA on when it will be released though.
Are there any other kernels I can use with this besides the one that comes with it?
At the moment, there isn't. I'm trying to get a custom kernel to work, but it has some problems. At the very least, we can customize the stock kernel some, but I do not know if a full source built kernel will ever be available.
Can I flash this if I am on the voodoo kernel?
No, if you are running the voodoo lagfix kernel, you will want to disable voodoo prior to doing anything. If you don't, you'll be in for some fun times with Odin getting your phone back in a usable state.
Can I get something included in the FAQ?
Yes you can. Just create a post with the following template, and I'll try to keep the FAQ updated. If I don't see it or add it right away, don't worry, I'll try and update it. If it has been a week or two and I still haven't responded, just send me a message with a link to what you want included. Here is the format to use:
Code:
[PLAIN][b]Question goes here?[/b][/PLAIN]
Answer goes here.
I'm getting ready to download it
When I go to flash the radio, Odin says it's an invalid image type
circa881 said:
When I go to flash the radio, Odin says it's an invalid image type
Click to expand...
Click to collapse
It should work You aren't extracting or renaming it at all are you?
Nope, not at all. I even downloaded it again just to make sure the first file wasn't corrupt
circa881 said:
Nope, not at all. I even downloaded it again just to make sure the first file wasn't corrupt
Click to expand...
Click to collapse
Your phone is in download mode when you're attempting to flash via Odin?
XD Now I feel like a ruh-tard. I forgot about that part
Wait, it's still saying invalid image type
I'm in shock... I'm on this forum every day and I missed this?! I'm going to install this and mess around with it. Ill post any bugs I find later this evening..
Kudos @imnuts for the effort!
Took about 7 minutes from download to phone setup. There was a short hang at the Samsung screen (approx. 15 seconds) but other than that it looks like it should. All startup animations are in tact..
I just gotta ask, its killing me... Where did this come from?
jaizero said:
I just gotta ask, its killing me... Where did this come from?
Click to expand...
Click to collapse
Does it really matter?
No... No it doesnt.. Its working perfectly by the way.. But Im sure you already knew that lol..
If jaizero got it to work, why couldn't I?
Sent from my SCH-I400 using XDA Premium App
---------------------------------
Jill plays tricks, Jack plays God
jaizero said:
Took about 7 minutes from download to phone setup. There was a short hang at the Samsung screen (approx. 15 seconds) but other than that it looks like it should. All startup animations are in tact..
I just gotta ask, its killing me... Where did this come from?
Click to expand...
Click to collapse
It came from heaven!!!
Sent from my Mind
^ lolololol
Sent from my SCH-I400 using XDA Premium App
FROYO
i think i love you (no homo)
I successfully loaded the ROM.
It hang a bit longer than usual on the verizon logo but after that no issues.
Thanks imnuts and anyone else that worked to make this possible.
Kay, how are people getting this to work when I couldn't get the radio flashed
Sent from my SCH-I400 using XDA Premium App
---------------------------------
Jill plays tricks, Jack plays God
Ok I dl'd both files, I have Odin1.3 both blue n yellow CWM update.zip but what is CWM kernal?
P.S. I totally love you guys and many thanks to nuts for confirming my faith in opensource and saving my phone
Sent from my SCH-I400 using XDA Premium App
Related
ROOTSide ROM
Base Flipside ROM with root/busybox/unknown sources enabled. Only thing different in this rom than rooting it yourself is you get to check/uncheck unknown sources. Yes, that means you can turn unknown sources ON and OFF! I have a clockworkmod recovery folder zipped up for distribution, but I want to post a full-fledged ROM zip file for the masses. PM me, and I will send you the ZIP file that I have right now.
What you get:
base install for the flipside (AT&T) with motoblur ready to set up. It is the exact same thing as doing a factory reset, but you get all the benefits of superuser with busybox and the addead feature of having unknown sources checkbox in the settings.
I will work towards a deoxed version this weekend as well.
No custom bootscreen (yet). No custom anything, really.
Almost There
I am currently in the middle of Deodexing the image. I have added in wifi tethering, and ensured it will have superuser and busybox pre-packaged. Next step is pushing this to my wife's phone and not having her get a pretty brick in return. If all goes well, I will be posting the image by morning light (CST).
Fingers Crossed!
Well
Things didn't go too well with my first build attempt. Appears to be a permission issue with the /system folder. I will sleep on it, and give it a second go in the morning. Sorry for the apparent "tease". If you want a faster build, I could use some other devs working with me.
Hey man, sounds like you're doing great! Keep it up...I already found a way to get the root with unknown sources checked, so i'm just gonna wait for the deoxed version! Hope it goes well as you try again.
Current Issues
unable to deodex the following:
/system/app/AABSync.odex
/system/app/blur-services.odex
Will try to load to phone without dodexing those two files. Hopefully all will go well.
Me too...good luck!!
jonsjava said:
unable to deodex the following:
/system/app/AABSync.odex
/system/app/blur-services.odex
Will try to load to phone without dodexing those two files. Hopefully all will go well.
Click to expand...
Click to collapse
Both of those files are att/moto bloat... just be rid of them
Sent from my MB508 using XDA App
Glad to see some work on this device, I love the form factor but it's obviously not very popular with devs...
Very interested to see this come around. I would like to streamline the wife's phone. Her battery life is a 1/3 of my rooted and flashed X10. Sadly though I am NOT a Dev nor even a cook.
I would have had something sooner, but I ran into issues not related to the ROM. Still working on it. Anybody have an idea for upgrading the CWM from the one we can currently use?
so I was curious, I was able to get to unlock mode with an sqlite thing and it worked just fine for me, but have you been able to knock out the bloat and stuff? cause it sounds like the makings of a custom rom lol
you know what the turtle said.. slowly but surely I will win this race
jonsjava said:
I would have had something sooner, but I ran into issues not related to the ROM. Still working on it. Anybody have an idea for upgrading the CWM from the one we can currently use?
Click to expand...
Click to collapse
Several ppl have said they have run into this problem...don't know what the deal is...
Is it possible to get CM7, or it's a problem with a locked kernel?
Ok, I just got a new phone for the Mrs., so I can break the flipside and unbreak it as much as I like.
Time for some real fearless development lol.
jonsjava said:
Ok, I just got a new phone for the Mrs., so I can break the flipside and unbreak it as much as I like.
Time for some real fearless development lol.
Click to expand...
Click to collapse
sounds good man, keep us posted on progress!!
So check this out...I messaged the guy at modmymobile and asked how things were going becuase I heard people were having problems getting an updated CMW and this is his response:
"been sittin on the updated cwm recovery binaries and been draggin my feet/takin a break the past week or 2. i'll throw something out soon, but cant commit to a timeframe, sorry."
Looks like things are on the up and up...stay patient everyone
GOOD JOB!!!,
We are waiting for the rom
Dukenukemx said:
Is it possible to get CM7, or it's a problem with a locked kernel?
Click to expand...
Click to collapse
I can't install CM7, it reboots and locks up, then I have to reinstall froyo. It never worked when I had eclair either.
Better Than LIfe
Future Echoes
7-15-11
Update #2 fr the day
Ok, stumbled across something today while trying to work some bugs.....
I managed to "inject" a recovery into the rom, and while it actually booted into recovery, and did recovery things, it even went so far as to boot the tab.
But that was it, didnt get a full boot.
So, I stumbled upon a Clockwork Recovery buy doing the right tricks i suppose, however alot needs to be ironed out. and this gets top priority this weekend, why? well ****, think about it, CWM for the CDMA Tabs for Gingerbread, and before Verizon releases GB, so this.......is great news.
Hope to have this done by end of weekend, and in doing so it might iron out the zip flash issue which means I can pump out those 2 roms.
Just wanted to share.
First, I'm removing the download link.
Second, yes I do get your PM's, and yes I do read them, and Yes, I agree....I am bad at getting back to people sometimes. Very busy trying to get GB out for the CDMA Tabs in a working fashion. I am sorry. Those of you who know me, just call, it does hurt my hands to type.
The Update.
I am yanking the download link as it is apparent that the release was/is a failure, how I managed to get it on my tab, no clue, however I cant duplicate it again.
I am working on the build, 1 for Sprint, 1 for VZW. I am trying to get it deodexed 100%, and at the same time get a VZW 3G build working.
However what is very important, that will take less time for me to flash a build to test.....is a recovery. We need a Gingerbread recovery. We do.
So I am doing a few things.....
1. doing my research on compiling a new kernal, and CWM for our tabs
2. asked for an recieved help in a new kernal and recovery
3. changing how i build these roms, no more "kitchens" or stupid "gui" based apps on Linux or Windslows that foul up the permissions, I am going 100% command line for a more effective result, and less need for revisions.
4. Working non stop through the weekend once my wife comes home from work today, so from noon today, to 3am sunday/monday I will be hard at work on all Better Than Life Releases.
I appreciate your patience in this botched release, next time, ill release a test build to a few people for a backup verification it will go without problem.
Until then, i gotta get to work.
Jim
Update..........7-12 6am
I just spent 5 hours trying every trick in the book... from extracting factory.rfs and trying to rebuild it to forcing a fake recovery... I got nothing. The problem is that ALL of the kernels that exist with CWM are ext4 froyo kernels, but the new kernel source for GB doesn't contain ext4 code... therefore, no flashy (unless by a fluke) because on reboot it tries to mount everything as rfs but it's in ext4 after you flash in an ext4 conversion kernel. I would have to design a new GB kernel with CWM and EXT4 modules in the source or revert a froyo kernel to pre-ext4 and put in a new cwm... either would take a couple of days... but I'm swamped right now. The only choice is for you to set it back up on your device like you had it and then pull a roto. Did what I could, sorry.
Click to expand...
Click to collapse
So, we tried (spacemoose and I) to get the extracted rom from my device to install on several others and ran across the same problems everyone else was having. however, the extracted rom being deodexed and zipalilgned, my device not.
So today I am going to try to get the 3G working, make the mods to the rom, and extract it, then try to inject the deodexed system and framework back in (which is always a ***** on a live device) and ill have no choice for now but to release a Heimdall flashable version of the rom.
I am waiting for that VZW release because with the sprint in my hands, and with a VZW version, all thats lacking is a Sprint tab to start making GB roms for both devices, however today will be a different story.
Oh, I did get TW4.0 to slightly work on the tab, itll either be released later, or maybe in an alpha build. I found it....well interesting. I tried it on the Psirens Rom (I have a TouchWiz4 version of Psirens) but it was way to damn buggy to release.
Ill keep yall posted today. Painpill time
Verizon wants to take their time, fine, screw them.
Gingerbread 2.3.4
Based on the Sprint update
Deodexed
Zipaligned
a little de-bloating
added CDMA/3G Verizon (3G with Verizon right now is a 50/50 shot
Kernal included in flashable zip
Just drop on SD Card, wipe everything
flash
enjoy
I am running this on my daily driver Verizon, to test and work bugs out and get 3G fully working, so expect alot...ALOT of updates and new versions of Gingerbread for Verizon.
This will be a constant updating project. So please expect bugs, and this is a last minute slap together thing tonight.
Enjoy.
More to come
Link
PULLED LINK FOR NOW 7-15-11
Omg thanks
Is this any faster/snappier than the stock SprintGB? I just finished getting it working on my vzw tab and it took me a while to get set up. Is it worth switching?
And btw thank you for all the work you do for the CDMA community, we greatly appreciate it!!
juanv145 said:
Is this any faster/snappier than the stock SprintGB? I just finished getting it working on my vzw tab and it took me a while to get set up. Is it worth switching?
Click to expand...
Click to collapse
Nandroid and try it out. That's what I'll be doing in a few minutes. Thanks Oldmacnut!
dammit. i just got Psirens 2.5 the way i like it. and now i wanna try this. i'm torn with overwhelmingly indecisive ennui now.
when u say 50/50 chance do u mean it may/may not work or itll only work sometimes?
damn seriously lol im trying to check the latest siren and i see this y bother with sirens lol
Macnut, this isent working at all for me. im flashing from your original psyrens mod and it wont flash at all. it said opening package....... cannot open sip,(bad) installation aborted.
wolfie083188 said:
Macnut, this isent working at all for me. im flashing from your original psyrens mod and it wont flash at all. it said opening package....... cannot open sip,(bad) installation aborted.
Click to expand...
Click to collapse
the link just updated. try re-download
indeed I'm lookin for the phone*.apk of VZW GB. is there an update of VZW?
Awesome, am giving this a try now.
Couple of questions:
1. Is this ext4?
2. Can we overclock with this kernel?
Thanks, this is huge for us suffering VZW tab owners!
When trying to install I got an error...something along the lines of, "error at line 11, can't symlink"
djf8 said:
When trying to install I got an error...something along the lines of, "error at line 11, can't symlink"
Click to expand...
Click to collapse
got the same error, it wont install for me
any solution to this? im tired of trying to get it to work. im now back to psyrens rc1 untill any update on this.
wolfie083188 said:
any solution to this? im tired of trying to get it to work. im now back to psyrens rc1 untill any update on this.
Click to expand...
Click to collapse
My "solution" was to just flash the Sprint rooted rom, which works with the VZW tab (not sure about 3g, though, I just use wifi anyway).
Would love it if we could get an ext4 and overclockable kernel working w/ GB for the VZW folks.
Going to download this today. This is almost more exciting than hcomb . I am glad someone is working on a vzm gbread rom.
Thanks Oldmacnut
Sent from my SCH-I800 using XDA App
Same here...
Sent from my ADR6400L using XDA Premium App
wolfie083188 said:
got the same error, it wont install for me
Click to expand...
Click to collapse
Same here...
Sent from my ADR6400L using XDA Premium App
Yeah, I'm sure something was just missed when oldmacnut compiled the zip for us. He'll get it worked out soon enough just hold off for now until there is word from him.
Getting the error as well. I am using the Sprint GB ROM in the meantime...
Oldmacnut can you give us more info on your custom ROM? I am assuming you have it rooted but the Sprint ROM is 190M while yours is 360M. Just wondering what kind of bloatware you removed and what if anything has been added to account for almost 2x the file size. Thanks
Quick question,
I'm rooted w/latest Starburst and ICS theme, and I accidentally allowed the most recent Sprint system update to go forward (12/12/2011 @ 8am [EST]). I did so without asking (here) if this was safe. So is it? I searched other threads and it appears that some recommend going back to stock prior to updating, while other swear that "re-stocking" is unnecessary.
So far (after 10 mins) I still have an exclamation mark triangle with a blue andriod guy. Not sure if this is normal. Thanks!
-Aaron
Aairman23 said:
Quick question,
I'm rooted w/latest Starburst and ICS theme, and I accidentally allowed the most recent Sprint system update to go forward (12/12/2011 @ 8am [EST]). I did so without asking (here) if this was safe. So is it? I searched other threads and it appears that some recommend going back to stock prior to updating, while other swear that "re-stocking" is unnecessary.
So far (after 10 mins) I still have an exclamation mark triangle with a blue andriod guy. Not sure if this is normal. Thanks!
-Aaron
Click to expand...
Click to collapse
If you aren't on the "factory" ODIN odexed ROM with EG30 modem, the update will fail. The update from Sprint relies on the system files being in a particular condition and the update will fail if they are not in that condition.
I have heard that some people have perfectly working phones after rebooting (but not updated). If you want EK02 ROMs, they're available in the development sub-forum and would be easier to manage than returning to stock and accepting this update.
EDIT: You may need to pull the battery to get out of the update. Supposedly once you put the battery in, you'll get to CWM, and then should be able to boot back into Starburst. I haven't done this, so I can't confirm.
Go back to stock.
The update will fail.
Why not flash the update from here? Android 2.3.6 + root is in the development section.
Sources? Personal experience.
Sent from the future.
nivron said:
If you aren't on the "factory" ODIN odexed ROM with EG30 modem, the update will fail. The update from Sprint relies on the system files being in a particular condition and the update will fail if they are not in that condition.
I have heard that some people have perfectly working phones after rebooting (but not updated). If you want EK02 ROMs, they're available in the development sub-forum and would be easier to manage than returning to stock and accepting this update.
EDIT: You may need to pull the battery to get out of the update. Supposedly once you put the battery in, you'll get to CWM, and then should be able to boot back into Starburst. I haven't done this, so I can't confirm.
Click to expand...
Click to collapse
You are correct, I pulled battery, was directed to CWM and rebooted system...all is fine (as it was before).
I saw QBKINGs videos on updating the Modem, but am not sure I want to go through with that until i figure out if the update is worth it. I am still not sure if this was an android version update, or an update that fixes LOS...or both. If I see a majority of members recommending this update, then I guess I'll jump through the hoops.
I tend to not have very much luck with tinkering with my phone. Something always goes wrong and then I loose 2 hrs of my day trying to figure out how to fix it. but I guess that's the name of the game...
SocialReject said:
Go back to stock.
The update will fail.
Why not flash the update from here? Android 2.3.6 + root is in the development section.
Sources? Personal experience.
Sent from the future.
Click to expand...
Click to collapse
I'll check this out.
I know I SHOULD know this, but... what would the process be for getting 2.3.6+ root along with starburst Rom. Would I flash the above recommendation then flash starburst over it, then load my ICS them last?
P.S. please forgive my incorrect use of the technical terms flash and load. As you can see from my questions, I only have a cursory understanding how rooting/flashing/loading.....just enough to get my phone to the customized state that it is currently in.
If it ain't broke.... that's my motto and if you are not savvy with the phone I definitely suggest you leave your setup alone. Using Odin has got to be one of the easiest things to do though but once again if it ain't broke....
Aairman23 said:
I'll check this out.
I know I SHOULD know this, but... what would the process be for getting 2.3.6+ root along with starburst Rom. Would I flash the above recommendation then flash starburst over it, then load my ICS them last?
P.S. please forgive my incorrect use of the technical terms flash and load. As you can see from my questions, I only have a cursory understanding how rooting/flashing/loading.....just enough to get my phone to the customized state that it is currently in.
Click to expand...
Click to collapse
Wasn't aware you were hoping to continue using starburst. I don't think starburst supports EK02 yet.
Sent from the future.
SocialReject said:
Wasn't aware you were hoping to continue using starburst. I don't think starburst supports EK02 yet.
Sent from the future.
Click to expand...
Click to collapse
That was all I really needed to know...I am very happy with starburst... thank you!
Edit: last question For some reason I have a little "arrow loop" or "arrows in a circle" (in grey) in the middle of my top menu bar, and it is partially blocking the time. Did I induce this somehow, how do I make it go away (reboot didn't work)?
playya said:
If it ain't broke.... that's my motto and if you are not savvy with the phone I definitely suggest you leave your setup alone. Using Odin has got to be one of the easiest things to do though but once again if it ain't broke....
Click to expand...
Click to collapse
Indeed. You wouldn't believe how many people make one tiny mistake in Odin and BAM it's all over.
Sent from the future.
Aairman23 said:
That was all I really needed to know...I am very happy with starburst... thank you!
Click to expand...
Click to collapse
No problem
Sent from the future.
Aairman23 said:
That was all I really needed to know...I am very happy with starburst... thank you!
Edit: last question For some reason I have a little "arrow loop" or "arrows in a circle" (in grey) in the middle of my top menu bar, and it is partially blocking the time. Did I induce this somehow, how do I make it go away (reboot didn't work)?
Click to expand...
Click to collapse
The arrows are the sync indicator (for any "pull" accounts or contact/calendar sync). You can check under Settings->Accounts & sync to see if any of your accounts are spinning. You can cancel the sync from there and restart it if you like. Sometimes they get stuck.
Aairman23 said:
Quick question,
I'm rooted w/latest Starburst and ICS theme, and I accidentally allowed the most recent Sprint system update to go forward (12/12/2011 @ 8am [EST]). I did so without asking (here) if this was safe. So is it? I searched other threads and it appears that some recommend going back to stock prior to updating, while other swear that "re-stocking" is unnecessary.
So far (after 10 mins) I still have an exclamation mark triangle with a blue andriod guy. Not sure if this is normal. Thanks!
-Aaron
Click to expand...
Click to collapse
More to the point...I am rooted with stock EG30. Received update and failed so I assume I need to un-root in order to get this to install correct?
jeffvb9 said:
More to the point...I am rooted with stock EG30. Received update and failed so I assume I need to un-root in order to get this to install correct?
Click to expand...
Click to collapse
You can do that, or Calkulin has a Stock EK02 ROM in the dev section, which would be easier.
I've been running my phone stock with the EG30 ROM and radio(s) since the day I got it. I originally rooted it using ODIN just to download su (my applications / data were not effected); I do not recall what this method was called. I have not messed with it since due to lack of time.
Today I got a notice about a new OTA firmware update. I let it try to update but it failed with the following error:
Code:
E: Error in /cache/182a027d4e63.SPH-D710_update_EG30_to_EK02.zip (Status 7)
I could be wrong but this error doesn't seem indicative of a failure to update due to the fact that I have root.
I rebooted the phone and it's still at stock EG30 and it states that there is no update available. The only thing I've tried since was to flash (using stock recovery still) a pre-rooted version of this update but it failed to "signature verification".
Can someone give me a pointer on what I need to do to get this phone updated preferably WITHOUT having to reload my apps/settings?
Thanks!
Followed this thread here and was able to update perfectly without having to wipe my data:
http://forum.xda-developers.com/showpost.php?p=20233048&postcount=376
I think the issue may have been that I previously "integrated into ROM" some software via TB. Now have to figure out how to re-root.
Wayno-san said:
Now have to figure out how to re-root.
Click to expand...
Click to collapse
Very simple, just look at the first post in that thread and choose Option A.
I am at my wits end right now. I can see my phone on com3 when it is booted up all the way, but it will not see it when in download mode. I erroneously flashed this file earlier, forgetting I did not have a regular GSII: I9100_APBOOT_I9100XXKP2_CL17109_REV02_eng_mid_ship.tar.md5
What other information would help diagnose this problem?
I currently have stock EL26 installed.
Alternatively, is it safe to install CM9 from this recovery? Seems to me I should resolve this first..
edit: I do not have an unrecognized device, I have tried more than one usb cable and port
Try this:
Redownload the drivers for the phone, install them and let your cpu reset. See if Odin sees your phone then.
I know with my GT10.1 it takes a few seconds more for Odin to see it so... But my ET4G pops up pretty fast.
The EL26/CWM is the kernel/recovery that you want to use when your flashing CM9 Alfa 5 and below.
But like you said... You may want to figure out why Odin isn't seeing your phone when it's in download mode.
Also... Do you have Kies installed on your cpu??? It'll cause problems with Odin to.
Have you tried Mobile Odin for what you want to do. I do almost everything involving CM and flashing with it. Works like a charm.
Sent From My Galaxy Class Star Fighter...
How in the hell do you forget you don't have a international version?! Smh
Sent from my SPH-D710 using xda premium
fryingpan0613 said:
How in the hell do you forget you don't have a international version?! Smh
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
WoW... He just edited his post as I was replying... Doesn't flashing an international tar mess up the bootloader??? I'm really not to sure where you go next.
If his phone still boots up okay couldn't help still use Mobile Odin and flash the right setup.
What was that old school Saturday morning psa... "Reading is fundamental" or something like that.
Sent From My Galaxy Class Star Fighter...
What is the right setup to use? A fresh GB rom install? I am at a loss at this point.
Yeah I ****ed up, I have not messed with my phone in many months.
Edit: driver reinstall did not work, do not have kies installed. mobile odin works on GB then? I can use the e4gt-autofix if that makes a difference. Updating from the stock recovery does not seem to work, it will start, then give me the ! triangle with sad android.
hilo4321 said:
What is the right setup to use? A fresh GB rom install? I am at a loss at this point.
Yeah I ****ed up, I have not messed with my phone in many months.
Edit: driver reinstall did not work, do not have kies installed. mobile odin works on GB then? I can use the e4gt-autofix if that makes a difference. Updating from the stock recovery does not seem to work, it will start, then give me the ! triangle with sad android.
Click to expand...
Click to collapse
Unfortunately my friend, I think you are hosed. The international PIT file is exceptionally different from the one we use for our phone. I don't remember the specifics but basically it remaps your partitions and causes USB to not work correctly. Your best bet is to try a JTAG service. I've heard MobileTechVideos.com is pretty well rated.
Sorry!
My phone is currently functioning properly when booted up. What are the implications of this beyond not being able to change roms (and not having a notification bar..wtf)?
Edit: ok I take it back, mass storage is not working either. also, I am definitely willing to buy Mobile Odin if anyone has any ideas.
hilo4321 said:
What is the right setup to use? A fresh GB rom install? I am at a loss at this point.
Yeah I ****ed up, I have not messed with my phone in many months.
Click to expand...
Click to collapse
Not getting on you m8 but... Flashing a rom for another device even if it's the same model is really really bad. Like rwilco said, yes the International GS2 and our ET4G's are the same devices but there software is very different.
hilo4321 said:
My phone is currently functioning properly when booted up. What are the implications of this beyond not being able to change roms (and not having a notification bar..wtf)?
Click to expand...
Click to collapse
Well... Like you said, most likely you will not be able to make any changes as in roms, kernels or things like that. And if you have any hardware issue you won't be able to get any support from Sprint. And you sure as hell won't be able to receive any OTA's from Sprint or Samsung.
Can you do something for use... Go to "Settings" then "About Phone" and under "Model Number" & "Baseband Version" and tell us what it says there.
I'm not really sure this would/can help you but if your phone still boots and runs you maybe able to Odin the right tar file and see if that fixes it. I mean it could work but I really doubt it. And what's the worst that could happen... It could brick it, then you could file an insurance claim... Just saying...
Where did you get the file from that you flashed??? Most likely not from this (ET4G) forum, should have read up a bit more before you started messing around with flashing roms again. Some things aren't easily fixable.
Sent From My Galaxy10.1 Class Starship....
I am a lucky SOB. I was able to use e4gtauto-sfx to put el29/CWM back on to my phone, and as a result I restored my nandroid backup. I have full function back, except, of course, no odin in download mode.
My baseband is S710.10 S.EK02 with standard model number sph d710.
I believe it came from the android forums, but like i said it was in the SGII area.
What tar file would I be looking for?
Doing some research m8... Give me a few mins....
Make sure you have Mobile Odin installed.
Sent From My Galaxy Class Star Fighter...
hilo4321 said:
I am a lucky SOB. I was able to use e4gtauto-sfx to put el29/CWM back on to my phone, and as a result I restored my nandroid backup. I have full function back, except, of course, no odin in download mode.
Click to expand...
Click to collapse
Ok... Yes you are my friend!!!! But I fear we are not completely out of the woods as of yet. You still have the "no Odin in download" thing still. And that could still be an issue, but at least your back up and running.
hilo4321 said:
My baseband is S710.10 S.EK02 with standard model number sph d710.
Click to expand...
Click to collapse
This is telling me that your on an older baseband... I'm running CM9 and my baseband reads "EL29" which I think is the most resent/updated baseband. I don't want to scare you but I really wish a dev would jump in here and shed some of there wisdom. (I'm almost to the point where I'm winging it.) But I feel we need to get your baseband to EL29.
hilo4321 said:
I believe it came from the android forums, but like i said it was in the SGII area.
Click to expand...
Click to collapse
From now on promise us you'll just use this site and forum for all of your download needs.... Please.
hilo4321 said:
What tar file would I be looking for?
Click to expand...
Click to collapse
Try this post... http://forum.xda-developers.com/showthread.php?t=1433101
Follow the instructions for the Android Install, about halfway down in the first post.
Sent From My Galaxy10.1 Class Starship....
Oh sweet Jesus, I promise.
Now when I do this will this wipe everything? I'm not terribly clear on that. Seems to me that it will.
I really appreciate the help man.
There are 2 different versions... One will wipe everything and one will leave all of your user data intact.
And like I said, I'm not a 100% sure this will fix it but I think we are moving in the right direction.
And not a problem... It's helping me learn more about what goes on inside our devices.
I am still a little worried about your bootloader though. If that was jacked up by flashing the wrong rom I don't know if this will fix it.
Question, when you hook up your device to your cpu when it's booted up are you still able to do things like transfer files and such???
Sent From My Galaxy10.1 Class Starship....
I can use mass USB now. I wont be able to test the el29 now though as I'm away now. I will report back when I can.
hilo4321 said:
I can use mass USB now. I wont be able to test the el29 now though as I'm away now. I will report back when I can.
Click to expand...
Click to collapse
That's great brother.... I'm really glad I could help ya get up and running to the point where you can a least have a use able device.
Sent From My Galaxy10.1 Class Starship....
EL29 was the last version of Gingerbread put out. You'll be able to use mobile Odin to flash stuff but you'll never get the USB to recognize in DL mode. I think jtag might be the only way to restore complete functionality.
---------- Post added at 11:42 PM ---------- Previous post was at 11:36 PM ----------
For now you'll be alright as long as you can get into recovery mode fine then you can flash modems in there(since mobile Odin can't flash them for our phone).
Your baseband (modem) should not matter and changing it won't have any affect on your problem. Good luck and let us know how out turns out.
Solved
I am posting now in case someone comes upon this post down the road.
I am now running cyanogen 9 on my e4gt. This thread saved me, as I was finally able to get odin to work. With that, I was able to flash a new recovery onto my phone (I used StockCWM-EL26). Then once I got that on there I flashed over to the Beta 1 build of Cyanogenmod for e4gt.
I'm sorry I can't be more clear or provide links, it took me a lot of crawling around the forums to figure this out. Perhaps someone more knowledgeable than I can clean up/expand my post. Let me tell you though, it feels really good to get this thing running smoothly again.
If you have any questions I'll try to help.
Good luck, idiot!
That's awesome dude. Remember stay in this forum :beer::thumbup:
sent from MY BAD A$$ ET4G
It all started here:
http://support.t-mobile.com/thread/44716
I griped on the T-Mobile forums about the struggle I've had in finding a smooth ROM for my T999. And I made an off-handed comment in another thread that got me pointed in the right direction hopefully. I'm looking for other T999 owners that have this problem.
The problem on DMD5 is all related to (apparently) intensive tasks. Playing games, mostly. Temple Run 2 and Fruit Ninja, neither of which are all that intensive, were nigh-on unplayable. Other games like Scramble with Friends would lag and stutter a bit, too. So after a lot of searching, I reverted to a pre-rooted T999UVDLJC with the matching baseband, so that way my phone doesn't try to update itself OTA. And performance is pretty good. But I'd like to think that I'm not alone, and I found I'm not alone in this thread:
http://forum.xda-developers.com/showthread.php?t=2326763&page=33
At the bottom of this page and the top of the next one, I found at least one kindred spirit that has a rev0 phone and has the same issue with DMD5.
NO other ROM has this issue. I've tried all of the official Samsung ROMs and I have tried official CM10.1 nightlies and the official 10.1 stable release and performance is very good on all of them. But it took a huge serious nosedive on T999UVDMD5.
So I'm curious about two things:
Does DMD5 run well on your phone? Particularly with games - that's where it was most notable, but even TWLauncher is laggy for me.
How old is your phone? According to the box for my phone it was built 6/30/2012.
If you are affected, could you help us all out on the T-Mobile support forum, and post a message in my thread at the top of the page? If we can get T-Mo and/or Samsung to look into it maybe we won't get left behind. I plan on using this phone for another year or more and I'd rather get the official updates in the future, too.
Update July 6, 2013: I found out thanks to help from people in this thread that I can run mismatched modem firmware/ROM and with the JLC modem on MD5 ROM, my phone runs fantastic. Or at least it has for about 2 hours - usually issues have shown themselves by now, and since they haven't cropped up I'm calling this resolved.
When you were on MD5, how did you update to it? OTA? Odin? Recovery flashable ROM?
And how much data have you been carrying over? (When did you last wipe data/factory reset, without restoring backups?)
Sent from my SGH-T999 using xda premium
---------- Post added at 01:03 AM ---------- Previous post was at 12:50 AM ----------
Btw, I'm on MD5, completely stock right now. Hw is Rev. 0
I get very little lag, if any, ever. Simple games or even intensive games run very fluidly for me.
For example, I just got Man of Steel when it went on sale and it works almost perfectly. Disney, Gameloft, EA games have all worked just fine.
The only MD5 issues I've seen around here seem to occur when someone is using a mixed build with the MD5 radio. And then its only been reports of heat issues and slight battery issues. Haven't seen much of anything regarding poor performance.
Sent from my SGH-T999 using xda premium
Please do not check "yes this is a question" if it is "info gathering" as all Q's are moved to Q&A. I will edit the title for you.
FNM
DocHoliday77 said:
When you were on MD5, how did you update to it? OTA? Odin? Recovery flashable ROM?
And how much data have you been carrying over? (When did you last wipe data/factory reset, without restoring backups?)
Sent from my SGH-T999 using xda premium
---------- Post added at 01:03 AM ---------- Previous post was at 12:50 AM ----------
Btw, I'm on MD5, completely stock right now. Hw is Rev. 0
I get very little lag, if any, ever. Simple games or even intensive games run very fluidly for me.
For example, I just got Man of Steel when it went on sale and it works almost perfectly. Disney, Gameloft, EA games have all worked just fine.
The only MD5 issues I've seen around here seem to occur when someone is using a mixed build with the MD5 radio. And then its only been reports of heat issues and slight battery issues. Haven't seen much of anything regarding poor performance.
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
I've tried all of the above. I even let Kies install it once. I've used TriangleAway and Odin to install 4.0.4 and let it do all the OTAs. Iv'e done factory resets and I've told setup not to restore my data to the phone and started from scratch. I used a flashable ZIP with the pre-rooted ROM, and when I did that I also got the DMD5 modem flashable ZIP to go along with it. I've tried not rooted. I've tried custom kernels, and I've tried stock. Odin completely stock and flashable zip totally customized. I've played with custom DMD5-based ROMs with the v6 script and I've tried not. I'm way out of ideas right now.
Sorry, @kennyglass123, I didn't realize I'd checked that box.
Starting to think all of them have "rev 0" for the CPU identifier, so that may not be the way to tell who has what.
Just to be clear, did you ever Factory Reset, then Odin flash MD5 (not mobile odin btw), and factory reset again to ensure internal sd was cleaned out too? If for MD5, you only flashed the Rom and Modem, you would have been on a mixed build. Also, many devs suggest waiting an hour before starting with any testing or reconfiguring. I'm not convinced this is always necessary, but they do usually kno more than me!
Don't get me wrong. I'm not trying to argue against your point, just to make sure not only that you've covered all angles, but that anyone who wants to back up your claim has also done the same.
As for the revision number, it may still be relevant as mine would have been among the first built too. We would need to find at least several others with the same, and different, to know for sure if it matters here.
Its always possible too that you got the unlucky pick of the hardware. (Just as possible though that I got a lucky pick)
Anyway, if you really are having that bad of problems with it, you may want to check if its still under warranty. I don't believe its the norm though.
Sent from my SGH-T999 using xda premium
Yeah I'm pretty sure, but I'm willing to do anything at this point. I'll do it again. I've stashed the Odin tar.md5 file on my backup hard drive, so I'll back up my working config and flash it again. Worst case scenario is that I re-root it, re-install recovery, and then restore my backup. Should take an hour max.
Use the root66 version of the firmware. Its pre rooted and is what I am running right now. Root alone won't have any negative effect, but will allow for much better troubleshooting.
Aside from that, keep it as clean from restored data as possible. Even a single corrupted contact entry can cause services to hang and eat up resources. I wouldn't even flash a recovery until you're ready to restore something.
(I use Mobile Odin Pro and it almost completely replaces the need for cwm or twrp. The only thing it can't do yet is make a nandroid backup.)
Sent from my SGH-T999 using xda premium
DocHoliday77 said:
Use the root66 version of the firmware. Its pre rooted and is what I am running right now. Root alone won't have any negative effect, but will allow for much better troubleshooting.
Aside from that, keep it as clean from restored data as possible. Even a single corrupted contact entry can cause services to hang and eat up resources. I wouldn't even flash a recovery until you're ready to restore something.
(I use Mobile Odin Pro and it almost completely replaces the need for cwm or twrp. The only thing it can't do yet is make a nandroid backup.)
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
So the root66 is an Odin image? I assume you're talking about this: http://forum.xda-developers.com/showthread.php?t=1771687
I've got it downloading now. Thanks for all your suggestions. I've not heard of Mobile Odin Pro, is it a custom recovery?
Whoops - found the Mobile Odin thread on XDA and got the lite version and the T999 flashing kernel. I'll give it a go.
Regarding The AOSP MD5 issues: the same thing is happening to me on stock. Have to use LJC or the battery sucks. What are your reboot habits like?
DocHoliday said:
If for MD5, you only flashed the Rom and Modem, you would have been on a mixed build. Also, many devs suggest waiting an hour before starting with any testing or reconfiguring. I'm not convinced this is always necessary, but they do usually kno more than me!
Click to expand...
Click to collapse
There is no possible way it could be necessary. Proof or it's placebo.
DeerSteak said:
So the root66 is an Odin image? I assume you're talking about this: http://forum.xda-developers.com/showthread.php?t=1771687
I've got it downloading now. Thanks for all your suggestions. I've not heard of Mobile Odin Pro, is it a custom recovery?
Click to expand...
Click to collapse
Yes, root66 is basically just 100% stock firmware, only rooted. Itll download as a .7z file. Just extract it and use the .tar.md5. You have the correct thread.
Mobile Odin is one of my all time favorite apps. Its from Chainfire if you are familiar with him. (SuperSU)
Its not a recovery exactly. What it does is reboots using what's called a flash kernel. This allows it to flash firmware like PC Odin, but also can flash roms that are made for recovery flashing. It doesn't replace the stock recovery like cwm/twrp either, so it also won't trip the flash counter. (I know that doesn't really matter with Triangle Away available (also by Chainfire)).
The only two drawbacks, (minor imo) are that it can't create nandroids, and it doesn't flash the FULL firmware (this is by design though).
I wouldn't bother with it right now, but definitely check it out after testing all this. Theres a free, lite, version here on xda. Ill send more info from my computer later.
Sent from my SGH-T999 using xda premium
---------- Post added at 11:51 AM ---------- Previous post was at 11:49 AM ----------
DeerSteak said:
Whoops - found the Mobile Odin thread on XDA and got the lite version and the T999 flashing kernel. I'll give it a go.
Click to expand...
Click to collapse
Don't use Mobile Odin for testin right now. It doesn't flash the full firmware.
Sent from my SGH-T999 using xda premium
DocHoliday77 said:
Yes, root66 is basically just 100% stock firmware, only rooted. Itll download as a .7z file. Just extract it and use the .tar.md5. You have the correct thread.
Mobile Odin is one of my all time favorite apps. Its from Chainfire if you are familiar with him. (SuperSU)
Its not a recovery exactly. What it does is reboots using what's called a flash kernel. This allows it to flash firmware like PC Odin, but also can flash roms that are made for recovery flashing. It doesn't replace the stock recovery like cwm/twrp either, so it also won't trip the flash counter. (I know that doesn't really matter with Triangle Away available (also by Chainfire)).
The only two drawbacks, (minor imo) are that it can't create nandroids, and it doesn't flash the FULL firmware (this is by design though).
I wouldn't bother with it right now, but definitely check it out after testing all this. Theres a free, lite, version here on xda. Ill send more info from my computer later.
Sent from my SGH-T999 using xda premium
---------- Post added at 11:51 AM ---------- Previous post was at 11:49 AM ----------
Don't use Mobile Odin for testin right now. It doesn't flash the full firmware.
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
OK awesome, I will check it out. I think what I'm going to do right now is just reset the flash counter, flash the Odin image, and then factory reset and set it up as a new phone. Does that sound reasonable? If I reboot into CWM after triangle away, it trips the flash counter again, at least that's what it seems to do, so I can't do anything other than reboot to download after Triangle Away.
Aerowinder said:
Regarding The AOSP MD5 issues: the same thing is happening to me on stock. Have to use LJC or the battery sucks. What are your reboot habits like?
There is no possible way it could be necessary. Proof or it's placebo.
Click to expand...
Click to collapse
I don't reboot unless the battery dies, or I was rebooting a lot when I was on MD5 trying to get stuff to work well. Generally I try not to mess with a good thing.
DeerSteak said:
OK awesome, I will check it out. I think what I'm going to do right now is just reset the flash counter, flash the Odin image, and then factory reset and set it up as a new phone. Does that sound reasonable? If I reboot into CWM after triangle away, it trips the flash counter again, at least that's what it seems to do, so I can't do anything other than reboot to download after Triangle Away.
Click to expand...
Click to collapse
That sounds fine. Remember, if you factory reset with stock recovery installed, it will wipe internal sdcard.
As long as you have cwm or twrp, the flash counter will always be at 1. I wouldn't worry about that for now though. It won't affect overall operation.
Sent from my SGH-T999 using xda premium
DocHoliday77 said:
That sounds fine. Remember, if you factory reset with stock recovery installed, it will wipe internal sdcard.
As long as you have cwm or twrp, the flash counter will always be at 1. I wouldn't worry about that for now though. It won't affect overall operation.
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
OK, I won't mess with it too much then. I've backed up my internal storage already and I've backed up my SMS using SMS Backup and Restore. That thing has been very handy keeping copies of my texts while I screw with this.
Cool, sounds like you're good to go! Good luck! And let us know how things seem to be acting after flashing.
Don't forget to factory reset after flashing md5.
:thumbup:
Sent from my SGH-T999 using xda premium
OK I got as far as the factory reset and then it was time to paint. My daughter's bedroom wasn't going to paint itself. I finally came back to the phone and it was patiently waiting for me to log in. I logged in and installed just a couple apps while I ate lunch, and then it sat until we were done painting and cleaning up. Logged into Facebook and Twitter, set up Google Now and updated Samsung apps. Once all that was done, I fired up Temple Run 2 and it was OK at first, but within 3-4 minutes it was choppy and laggy again. The phone never got warm to the touch. It just ran poorly. I exited out and killed all apps with the built-in task manager, and went back to the game. Not really any better. It's just super choppy. I even turned down all the graphics options in the settings for the game and that made zero difference.
Eventually I gave up. Restored my 4.1.1 backup, fired up some stuff, performance was great. It's just the combination of my phone and that software. No idea what it is at this point. I do appreciate all the assistance you guys have lent me.
Right now I'm on T-mo and was waiting out the 60 days before I ported my wife's number in to my account. Now that that's over, I'll eventually port in her number. She's extremely happy with her iPhone 4s and insists she's not interested in an iPhone 5, so what I'll probably do is use the ability to get new hardware as an excuse to get a Galaxy S4. WHen I first came to T-mo I just got a SIM and bought the phone used - found out later on that I should have just bought a phone through T-mo because I can't get a new phone on a payment plan for a year unless it's as part of a new line. She'll be a new line, so I'll get a phone.
This hasn't put me off on Samsung or even on the GS3 - it's just my phone has a weird issue of some sort. And the people here have been super awesome. Thanks tons for all your advice. In the meantime I'll run JLC and leave well enough alone.
DeerSteak said:
OK I got as far as the factory reset and then it was time to paint. My daughter's bedroom wasn't going to paint itself. I finally came back to the phone and it was patiently waiting for me to log in. I logged in and installed just a couple apps while I ate lunch, and then it sat until we were done painting and cleaning up. Logged into Facebook and Twitter, set up Google Now and updated Samsung apps. Once all that was done, I fired up Temple Run 2 and it was OK at first, but within 3-4 minutes it was choppy and laggy again. The phone never got warm to the touch. It just ran poorly. I exited out and killed all apps with the built-in task manager, and went back to the game. Not really any better. It's just super choppy. I even turned down all the graphics options in the settings for the game and that made zero difference.
Eventually I gave up. Restored my 4.1.1 backup, fired up some stuff, performance was great. It's just the combination of my phone and that software. No idea what it is at this point. I do appreciate all the assistance you guys have lent me.
Right now I'm on T-mo and was waiting out the 60 days before I ported my wife's number in to my account. Now that that's over, I'll eventually port in her number. She's extremely happy with her iPhone 4s and insists she's not interested in an iPhone 5, so what I'll probably do is use the ability to get new hardware as an excuse to get a Galaxy S4. WHen I first came to T-mo I just got a SIM and bought the phone used - found out later on that I should have just bought a phone through T-mo because I can't get a new phone on a payment plan for a year unless it's as part of a new line. She'll be a new line, so I'll get a phone.
This hasn't put me off on Samsung or even on the GS3 - it's just my phone has a weird issue of some sort. And the people here have been super awesome. Thanks tons for all your advice. In the meantime I'll run JLC and leave well enough alone.
Click to expand...
Click to collapse
Before you give up, try debloating your install. I will PM you a link to the one I made. Backup first.
Aerowinder said:
Before you give up, try debloating your install. I will PM you a link to the one I made. Backup first.
Click to expand...
Click to collapse
OK i'll give it a go. Thanks.
Should I re-flash the MD5 modem?
I'd flash the LJC firmware, Third firmware link in my sig. LJC link is buried in the OP.
Aerowinder said:
I'd flash the LJC firmware, Third firmware link in my sig. LJC link is buried in the OP.
Click to expand...
Click to collapse
OK I see it there. So I should use the LJC modem/firmware with the DMD5 debloat ROM you're going to PM the link for to me? Will they work if they're mismatched? I assumed (not that I'd bothered asking before) that they'd all have to be the same.