Develop Bugs

[ROM]ROOTSide (In the Works. First Upload this week)

ROOTSide ROM
Base Flipside ROM with root/busybox/unknown sources enabled. Only thing different in this rom than rooting it yourself is you get to check/uncheck unknown sources. Yes, that means you can turn unknown sources ON and OFF! I have a clockworkmod recovery folder zipped up for distribution, but I want to post a full-fledged ROM zip file for the masses. PM me, and I will send you the ZIP file that I have right now.
What you get:
base install for the flipside (AT&T) with motoblur ready to set up. It is the exact same thing as doing a factory reset, but you get all the benefits of superuser with busybox and the addead feature of having unknown sources checkbox in the settings.
I will work towards a deoxed version this weekend as well.
No custom bootscreen (yet). No custom anything, really.

Almost There
I am currently in the middle of Deodexing the image. I have added in wifi tethering, and ensured it will have superuser and busybox pre-packaged. Next step is pushing this to my wife's phone and not having her get a pretty brick in return. If all goes well, I will be posting the image by morning light (CST).
Fingers Crossed!

Well
Things didn't go too well with my first build attempt. Appears to be a permission issue with the /system folder. I will sleep on it, and give it a second go in the morning. Sorry for the apparent "tease". If you want a faster build, I could use some other devs working with me.

Hey man, sounds like you're doing great! Keep it up...I already found a way to get the root with unknown sources checked, so i'm just gonna wait for the deoxed version! Hope it goes well as you try again.

Current Issues
unable to deodex the following:
/system/app/AABSync.odex
/system/app/blur-services.odex
Will try to load to phone without dodexing those two files. Hopefully all will go well.

Me too...good luck!!

jonsjava said:
unable to deodex the following:
/system/app/AABSync.odex
/system/app/blur-services.odex
Will try to load to phone without dodexing those two files. Hopefully all will go well.
Click to expand...
Click to collapse
Both of those files are att/moto bloat... just be rid of them
Sent from my MB508 using XDA App

Glad to see some work on this device, I love the form factor but it's obviously not very popular with devs...

Very interested to see this come around. I would like to streamline the wife's phone. Her battery life is a 1/3 of my rooted and flashed X10. Sadly though I am NOT a Dev nor even a cook.

I would have had something sooner, but I ran into issues not related to the ROM. Still working on it. Anybody have an idea for upgrading the CWM from the one we can currently use?

so I was curious, I was able to get to unlock mode with an sqlite thing and it worked just fine for me, but have you been able to knock out the bloat and stuff? cause it sounds like the makings of a custom rom lol
you know what the turtle said.. slowly but surely I will win this race

jonsjava said:
I would have had something sooner, but I ran into issues not related to the ROM. Still working on it. Anybody have an idea for upgrading the CWM from the one we can currently use?
Click to expand...
Click to collapse
Several ppl have said they have run into this problem...don't know what the deal is...

Is it possible to get CM7, or it's a problem with a locked kernel?

Ok, I just got a new phone for the Mrs., so I can break the flipside and unbreak it as much as I like.
Time for some real fearless development lol.

jonsjava said:
Ok, I just got a new phone for the Mrs., so I can break the flipside and unbreak it as much as I like.
Time for some real fearless development lol.
Click to expand...
Click to collapse
sounds good man, keep us posted on progress!!

So check this out...I messaged the guy at modmymobile and asked how things were going becuase I heard people were having problems getting an updated CMW and this is his response:
"been sittin on the updated cwm recovery binaries and been draggin my feet/takin a break the past week or 2. i'll throw something out soon, but cant commit to a timeframe, sorry."
Looks like things are on the up and up...stay patient everyone

GOOD JOB!!!,
We are waiting for the rom

Dukenukemx said:
Is it possible to get CM7, or it's a problem with a locked kernel?
Click to expand...
Click to collapse
I can't install CM7, it reboots and locks up, then I have to reinstall froyo. It never worked when I had eclair either.

[ROM][STOCK][FROYO] EC03 Froyo Update

Here is the update that everyone has been waiting for At the moment, I'm only providing the modem, and rooted, stock, deodexed version of the ROM. There will be a cleaned up version to go along with all of this in due time, but we're currently working out some problems with it. I would like to note that despite this being the Froyo update, it is not without its own set of problems, and odds are you may never see another update outside of this from anywhere. However, the benefits of getting Froyo will outweigh the problems with it for most people, so have at it.
You will need a few things to get this, first, the downloads list here will be needed (obviously). You'll also need to have CWM setup and know how to use Odin. Heimdall will also work for those of you not on Windows, but I'm not providing any instructions for flashing using Heimdall. Also note that you will want to wipe data or perform a factory reset before booting into Froyo to avoid any problems. While you may get away with not doing it, you could end up with several problems, so my recommendation is to wipe data. Also, you can flash the ROM first, or flash the modem first, which ever you want to do. There isn't really a required order for it, as long as you do both parts.
[size=+1]Instructions[/size]
Download everything you need.
Odin
Froyo Radio
ROM+Kernel
CWM Kernel
CWM update.zip
Put the ROM zip and CWM update.zip on your SD Card
Flash the Radio via Odin in the PDA box
Enter CWM and flash the ROM+Kernel
Wipe Data in CWM before restarting your phone
Restart and enjoy Froyo
[size=+1]Downloads[/size]
Modem
ROM+Kernel

FAQ
How can I donate to you for this?
You can either click the "Donate to me" button above my avatar, or go through this link. Don't feel obligated to donate though, as Verizon should have given this to you (the users) long ago.
Can I still receive updates after flashing this?
You cannot receive updates after flashing this unless you revert back to DL17, which is the latest official software released by Verizon and Samsung.
If I can receive updates on this, how can I restore back to DL17?
I've been sending this to several people already that have had problems with their phones. If you need to revert back to DL17 for any reason, download this. You will need 7-zip or similar to extract it. Once you have the .tar.md5 file, flash it in Odin via PDA like you did for flashing the modem to get Froyo.
Can I return my phone to Verizon for warranty repair/service with this on my phone?
No. If you need any sort of help with your phone from Verizon, you will need to have the stock DL17 ROM on your phone. Anything else and you have voided your warranty and Verizon and/or Samsung will not have to do anything to help you. See the above question for a package to restore your phone to the latest stock software.
Are there any bugs in this release?
Yes there are, just as there is with any software. I do not know what the bugs are though off hand though as I have not been using this update. I also cannot say whether any of the problems you may have will ever get fixed, seeing as you can't even get a straight answer on why the update has been taking so long.
Is xxx modification/theme compatible with this?
Odds are that it isn't. All of the current themes and modifications for DL17 will not work on this package. They will all need to be updated to be able to work. Given that this is a relatively new release, this could take some time, especially given that it is the summer and people are on vacation (I'm looking at you trailblazer ). We will work though to try and get all of the mods ported from DL17 to EC03 so that you don't have to give up anything to upgrade.
Will you release a "clean ROM" based on this?
Yes, and it is already in progress. I have sent it out to a couple people already to ask for feedback and any issues. Once they say it is ok, I'll create a new thread with the cleaned up version. There is currently no ETA on when it will be released though.
Are there any other kernels I can use with this besides the one that comes with it?
At the moment, there isn't. I'm trying to get a custom kernel to work, but it has some problems. At the very least, we can customize the stock kernel some, but I do not know if a full source built kernel will ever be available.
Can I flash this if I am on the voodoo kernel?
No, if you are running the voodoo lagfix kernel, you will want to disable voodoo prior to doing anything. If you don't, you'll be in for some fun times with Odin getting your phone back in a usable state.
Can I get something included in the FAQ?
Yes you can. Just create a post with the following template, and I'll try to keep the FAQ updated. If I don't see it or add it right away, don't worry, I'll try and update it. If it has been a week or two and I still haven't responded, just send me a message with a link to what you want included. Here is the format to use:
Code:
[PLAIN][b]Question goes here?[/b][/PLAIN]
Answer goes here.

I'm getting ready to download it

When I go to flash the radio, Odin says it's an invalid image type

circa881 said:
When I go to flash the radio, Odin says it's an invalid image type
Click to expand...
Click to collapse
It should work You aren't extracting or renaming it at all are you?

Nope, not at all. I even downloaded it again just to make sure the first file wasn't corrupt

circa881 said:
Nope, not at all. I even downloaded it again just to make sure the first file wasn't corrupt
Click to expand...
Click to collapse
Your phone is in download mode when you're attempting to flash via Odin?

XD Now I feel like a ruh-tard. I forgot about that part

Wait, it's still saying invalid image type

I'm in shock... I'm on this forum every day and I missed this?! I'm going to install this and mess around with it. Ill post any bugs I find later this evening..
Kudos @imnuts for the effort!

Took about 7 minutes from download to phone setup. There was a short hang at the Samsung screen (approx. 15 seconds) but other than that it looks like it should. All startup animations are in tact..
I just gotta ask, its killing me... Where did this come from?

jaizero said:
I just gotta ask, its killing me... Where did this come from?
Click to expand...
Click to collapse
Does it really matter?

No... No it doesnt.. Its working perfectly by the way.. But Im sure you already knew that lol..

If jaizero got it to work, why couldn't I?
Sent from my SCH-I400 using XDA Premium App
---------------------------------
Jill plays tricks, Jack plays God

jaizero said:
Took about 7 minutes from download to phone setup. There was a short hang at the Samsung screen (approx. 15 seconds) but other than that it looks like it should. All startup animations are in tact..
I just gotta ask, its killing me... Where did this come from?
Click to expand...
Click to collapse
It came from heaven!!!
Sent from my Mind

^ lolololol
Sent from my SCH-I400 using XDA Premium App

FROYO
i think i love you (no homo)

I successfully loaded the ROM.
It hang a bit longer than usual on the verizon logo but after that no issues.
Thanks imnuts and anyone else that worked to make this possible.

Kay, how are people getting this to work when I couldn't get the radio flashed
Sent from my SCH-I400 using XDA Premium App
---------------------------------
Jill plays tricks, Jack plays God

Ok I dl'd both files, I have Odin1.3 both blue n yellow CWM update.zip but what is CWM kernal?
P.S. I totally love you guys and many thanks to nuts for confirming my faith in opensource and saving my phone
Sent from my SCH-I400 using XDA Premium App

[Q] To Root or not Root?

let me give you some background info. I have owned my (AT&T) glide for less than a month coming from a overclocked milestone with CM7. Almost everyday I turn my computer on I go to XDA and skim over the rooting guides and the custom roms available. And then I read the "Read Before Updating" thread that says ICS is coming and it puts me off again. Even though my phone is unlocked and outside of the US now, so I not 100% certain I'll get anything. Every day I also check for updates on my phone, force check and everything.
So my question to you guys is this: Shall I patiently continue to wait it out in the fruitless hope something may well happen in the next month or two or bite the bullet and loose the bloatware now? I'm sure its a question on the minds of many glide owners right now

I put CWM + Osimood on mine just to get rid of the US-Centric bloatware, and am liking the cleanness of it. As you're in the UK too one thing you might sway you is that Osimood is based on Rogers which allows you to switch off 4G to save battery.

Why wait? Once it's out, it's pretty good chance it will be available here (or samfirmware). If you waited, would you even be able to get the AT&T OTA update through your UK operator? I would think you'd have to be on the AT&T home network to get the OTA.
But then again, it would take Samsung forever to finally get the ICS out for the CG.

lost_ said:
Why wait? Once it's out, it's pretty good chance it will be available here (or samfirmware). If you waited, would you even be able to get the AT&T OTA update through your UK operator? I would think you'd have to be on the AT&T home network to get the OTA.
But then again, it would take Samsung forever to finally get the ICS out for the CG.
Click to expand...
Click to collapse
Agreed since you are not in the States and on the AT&T Network I would Root and install a clean Rom with no BLoatware. Then when we get the ICS you simply flash it.

Thanks for the replies guys
When I check for an update it does say it checks the AT&T server, whether its actually checking the AT&T server or its just a generic message and it actually checks my provider server who knows.
Think I'm going to bit the bullet and get it rooted today

Go for it! There's so much more you can do when you're rooted. I'll never go back.

Pablo 13 said:
Thanks for the replies guys
When I check for an update it does say it checks the AT&T server, whether its actually checking the AT&T server or its just a generic message and it actually checks my provider server who knows.
Think I'm going to bit the bullet and get it rooted today
Click to expand...
Click to collapse
Root and flash or only root? Might as well jump all in while your getting your feet wet!

dudejb said:
Root and flash or only root? Might as well jump all in while your getting your feet wet!
Click to expand...
Click to collapse
More than likely both
Just rooted it now, (well halfway there) seemed pretty easy to do, at least easier than my last phone.
when you flash the rom over you you do it in PDA section too or another option?
Just gonna download super user, ti backup, and a few other root only apps, have a quick play then flash to something else

Pablo 13 said:
More than likely both
Just rooted it now, (well halfway there) seemed pretty easy to do, at least easier than my last phone.
when you flash the rom over you you do it in PDA section too or another option?
Just gonna download super user, ti backup, and a few other root only apps, have a quick play then flash to something else
Click to expand...
Click to collapse
If you did Clock work mod the instructions are:
1. Launch odin (v1.82 tested)
2. Boot your phone in "Download mode"
3. Select PDA in odin and choose the file "CWMR_recovery.tar.md5"
4. ONLY "auto reboot" must be check !!
Then just put aradat's kernel via CWM and your rooted. That is what I started with. Now I just flash everything with CWM and no longer touch Odin.

Right all fully rooted up.
In CWM it asks what device and only gives the choice of epic 4g and i9000 I tried the later and attempted to back up my current Rom and got and explanation mark in a triangle and a droid on my screen. not much happened for a few mins so i pulled the battery and rebooted it.
Any idea which I should select?
Thanks for all the help BTW

Pablo 13 said:
Right all fully rooted up.
In CWM it asks what device and only gives the choice of epic 4g and i9000 I tried the later and attempted to back up my current Rom and got and explanation mark in a triangle and a droid on my screen. not much happened for a few mins so i pulled the battery and rebooted it.
Any idea which I should select?
Thanks for all the help BTW
Click to expand...
Click to collapse
Where does it ask you that? I did not get any prompts. I just went to flash from SD card and then chose the file I wanted to flash. Took a few minutes then the flash was complete and on reboot it took a little while in setting everything up and then I got the Google prompt for an account to use. Oh and if you say thanks feel free to use the thank you button.

Probably talking about the CW App on the Market (not supported, don't use it!)

Sorry for confusing you, not in recovery, in Rom manager.
Ive actually put mine down now and just spent the last few hours trying to root my girlfriend's HTC Sensation, which has been a bit more long winded.

Nice gl have fun!
Sent from my SAMSUNG-SGH-I927 using xda premium

[Reward] [Request] [CM 11 ROM] Samsung Galaxy Tab Pro 12.2 (SM-T900)

I just bought one! and love CM since the release of my first android phone, the Samsung Galaxy S2
There are only custom roms for the 8.4 and the 10.1 version.
There are no custom ROMs available for this device now, and i hate the slurpy/fancy samsung interface.
I am willing to pay for it, for the first nice and clean nightly CM 11 rom + CWM/TWRP recovery and working Gapps for this device.
This device is out for a while now and there are still no custom roms for.
So i hope there is somebody who can help, to get the custom roms madness for this device getting started.

I got you covered.
I can make a stock custom rom which has all the samsung junk removed so the tablet can go faster.

I want a rooted aosp rom, like cyanogenmod or something.
Are you able to do that?

ExoRRSmits said:
I want a rooted aosp rom, like cyanogenmod or something.
Are you able to do that?
Click to expand...
Click to collapse
Unfortunately, I can't. (I have a 10.1 and I want the same thing). The thing is the processor is a exynos 5 or something like that and it is (as I have read and understood) quite hard to do. I've tried to learn about making it but trust me it is much more harder than it seems. Even my 10.1 doesn't have CM yet. Still if you like I can make a you a stock debloated rom so it will at least run faster than what you have now.

ik4evr2 said:
I got you covered.
I can make a stock custom rom which has all the samsung junk removed so the tablet can go faster.
Click to expand...
Click to collapse
I am very much interested in this thanks!

nickster1 said:
I am very much interested in this thanks!
Click to expand...
Click to collapse
No problem at all. It will take me a day or two.

ik4evr2 said:
No problem at all. It will take me a day or two.
Click to expand...
Click to collapse
Can you make deodex please? I already have the stock debloate, but would be nice to have deodexed rom.

ik4evr2 said:
Unfortunately, I can't. (I have a 10.1 and I want the same thing). The thing is the processor is a exynos 5 or something like that and it is (as I have read and understood) quite hard to do. I've tried to learn about making it but trust me it is much more harder than it seems. Even my 10.1 doesn't have CM yet. Still if you like I can make a you a stock debloated rom so it will at least run faster than what you have now.
Click to expand...
Click to collapse
Well for now it sounds ok to me.
Is it rooted as well?
How debloated is it? Is samsung touchwiz removed?
That's what i'm hating the most. The settings app with tabs, i like the whole settings menu in cm.
And how fast can it see the light?
If its very nice, i can donate something for your good and hard work.

There might be a debloated deodexed rom already here?: http://forum.xda-developers.com/showthread.php?t=2776206

Ludespeed said:
There might be a debloated deodexed rom already here?: http://forum.xda-developers.com/showthread.php?t=2776206
Click to expand...
Click to collapse
No, I tried it, and unfortunately it doesn't work for the 12.2 version. The internal, as well as the external sd card both are locked, meaning you can't even update any apps, or saving any data... you get an error message 110, from Play Store.

ik4evr2 said:
No problem at all. It will take me a day or two.
Click to expand...
Click to collapse
Any luck ?

ExoRRSmits said:
Any luck ?
Click to expand...
Click to collapse
+1!

What about an overclock kernel? I debloated my Galaxy tab 12.2 already but have yet to successfully overclock it. I've been looking everywhere for an improved kernel or something to improve the performance, debloating didn't help it that much so a kernel or custom rom would be the next bet. Anyone point me in the right direction?

In school atm, but had a few mins so I built this: https://drive.google.com/file/d/0B5kaDFDMK0TYci14Nm1EOFFnX2s/edit?usp=sharing
Can't reply to any question atm but will when I get home. Not sure if it will boot.
Download, advance wipe in TWRP (except internal/external storage) and see if it boots to CM. Then post what's working and what's not
Enjoy if it works!
Gotta go

Shaheer said:
In school atm, but had a few mins so I built this: https://drive.google.com/file/d/0B5kaDFDMK0TYci14Nm1EOFFnX2s/edit?usp=sharing
Can't reply to any question atm but will when I get home. Not sure if it will boot.
Download, advance wipe in TWRP (except internal/external storage) and see if it boots to CM. Then post what's working and what's not
Enjoy if it works!
Gotta go
Click to expand...
Click to collapse
Great initiative,
I tried making an install. Unfortunately everything halts at the cm welcome screen with the message "Unfortunately, the process com.android.phone has stopped", Maybe, I'm not too surprised since we're using a wifi-version. But, it actually boots up, so there are great expectations for a cm11 port, within short.
Thanks for all your efforts.

arcadia2uk said:
Great initiative,
I tried making an install. Unfortunately everything halts at the cm welcome screen with the message "Unfortunately, the process com.android.phone has stopped", Maybe, I'm not too surprised since we're using a wifi-version. But, it actually boots up, so there are great expectations for a cm11 port, within short.
Thanks for all your efforts.
Click to expand...
Click to collapse
Hey everyone,
So here is an update: (At school so don't have much time but...) This should fix the phone error. :good: However, I am pretty sure Wi-Fi isn't going to work ATM. Since i'm at school can't download things internet is tooo slow, so what someone can do if they want is to download a touchwiz rom for your device or just plain stock rom. Then, on the download go to /system/etc and there should be a folder called Wi-Fi. Copy that to system/etc in the CM rom. And then flash the CM Rom. If Wi-Fi works go ahead and upload the link and post it here.
Download: https://drive.google.com/file/d/0B5kaDFDMK0TYRmNGUVUxVDloeWc/edit?usp=sharing

Shaheer said:
Hey everyone,
So here is an update: (At school so don't have much time but...) This should fix the phone error. :good: However, I am pretty sure Wi-Fi isn't going to work ATM. Since i'm at school can't download things internet is tooo slow, so what someone can do if they want is to download a touchwiz rom for your device or just plain stock rom. Then, on the download go to /system/etc and there should be a folder called Wi-Fi. Copy that to system/etc in the CM rom. And then flash the CM Rom. If Wi-Fi works go ahead and upload the link and post it here.
Download: https://drive.google.com/file/d/0B5kaDFDMK0TYRmNGUVUxVDloeWc/edit?usp=sharing
Click to expand...
Click to collapse
Just as you suspected the wifi didn't work initially. However, I followed your instructions for the update, and there it was. Here's the link to the updated cm11-4.4.4 w. wifi Currently, there seems to be no access to the internal SD card, as well as the external.
I also have difficulties in finding a compatible gapps, any ideas? Could it be due to the SD card issue? It starts up, but playstore crashes at first search.

arcadia2uk said:
Just as you suspected the wifi didn't work initially. However, I followed your instructions for the update, and there it was. Here's the link to the updated cm11-4.4.4 w. wifi Currently, there seems to be no access to the internal SD card, as well as the external.
I also have difficulties in finding a compatible gapps, any ideas? Could it be due to the SD card issue? It starts up, but playstore crashes at first search.
Click to expand...
Click to collapse
Will post an answer in a while. Leaving school in a min so I was just checking the thread. :fingers-crossed:
After homework and all that i'll upload the updated file when I get a chance to work on it.

Shaheer said:
Will post an answer in a while. Leaving school in a min so I was just checking the thread. :fingers-crossed:
After homework and all that i'll upload the updated file when I get a chance to work on it.
Click to expand...
Click to collapse
Great start Shaheer, apparently I'm running into a lot of the same problems that you initially ran into building the T-520 port.
Could I suggest that you start a thread in the development section for this ROM? I believe that I'm one of the few people having noticed your work, and that's only due to your message. Then we can get a few more people to chip in for heavy testing, at least the initial runs.
It would be good if the gapps along with the SDcard and PC-mount issues could have priority. Once they're up you can at least flash back and forth from the same ROM, without passing through an intermediary stock ROM. Notably, as each flash takes close to 30 min, if not more...However, I can believe they are all the result of the fact that the ROM can't detect the internal SDcard; no card = no mount, no card = no play store download.
On the good side, it seems like the GPS is working, and the bluetooth discovers surrounding devices and besides the mentioned SDcard issue, I have not seen much missing at least mot that can be tested at this point. There's no camera, but that seems to be something most AOSP ROM's for the Samsung tablets are struggling with currently.
Anyway, thanks again, I really appreciate your efforts.

arcadia2uk said:
Great start Shaheer, apparently I'm running into a lot of the same problems that you initially ran into building the T-520 port.
Could I suggest that you start a thread in the development section for this ROM? I believe that I'm one of the few people having noticed your work, and that's only due to your message. Then we can get a few more people to chip in for heavy testing, at least the initial runs.
It would be good if the gapps along with the SDcard and PC-mount issues could have priority. Once they're up you can at least flash back and forth from the same ROM, without passing through an intermediary stock ROM. Notably, as each flash takes close to 30 min, if not more...However, I can believe they are all the result of the fact that the ROM can't detect the internal SDcard; no card = no mount, no card = no play store download.
On the good side, it seems like the GPS is working, and the bluetooth discovers surrounding devices and besides the mentioned SDcard issue, I have not seen much missing at least mot that can be tested at this point. There's no camera, but that seems to be something most AOSP ROM's for the Samsung tablets are struggling with currently.
Anyway, thanks again, I really appreciate your efforts.
Click to expand...
Click to collapse
Hey!,
So I was really busy yesterday evening writing a 3 page essay and doing other homework so I didn't get anytime to work on the rom. My thoughts too were to start a new thread in the dev section for this.
I haven't gotten too far with the T520 port either as i'm still learning CM development. (I'm more used to touchwiz ) I have some time right now so give me a bit and i'll try to get a thread started and update the rom to get SD Card working.
EDIT: Actually, I can't proceed till someone can make sure that Google Play downloads app properly. If it doesn't then I need to work on that before anything or it's going to cause major issues.

How to flash d2spr Lollipop Roms on the d2lterefreshspr (SPH-L710T Tri-Band Model)

1st let me just say I'm not a developer at all just someone who enjoys custom roms as much as everyone else here! I'm not very good at explaining things so please try to bear with me and try to understand this the best you can! If any real developers read this please help us by adding support for our device and if any developers can explain this better please do so! For anyone with the d2lterefreshspr (SPH-L710T Tri-Band) wanting to flash almost any Lollipop Roms made for the d2spr you can flash them! You might 1st have to unzip the rom and go to the updater-script and delete the 1st part where it checks the recoveries build to see if your device is the d2spr or the d2lte and so on. Then repack the rom back into a zip file the flash it in recovery as you normally would. Then once the Rom boots you won't have a baseband or service or anything but I will tell you why and how to fix this. The d2spr's modem-image file are labeled different from our modem! At the bottom of this I will show you the list of each modems links so you can see which 1s are different and what you have to delete and resymlink to get the Rom to reconize your baseband and get your service working! But using a file manager with root access navigate to the files in "/system/etc/firmware/ " and delete the wrongly symlinked modem-images! Once you have done that navigate to "/firmware-mdm/images/" folder and start symlinking the correct files to "/system/etc/firmware/" folder. After this you might want to modify the buid.prop and change all parts that say d2spr to d2lterefreshspr but only if you want. Once you have done this reboot to recovery and flash the Lte apn fix zip then reboot. Now everything should work with service and everything! I have tried this on the latest SlimLP 5.1.1. Beta and A..I.C.P. Lollipop and a few other Lollipop Roms for the d2spr. If you would like to download some of the Roms I have modified the updater-scripts so they will flash on our device and the APN zip I flash with a flashable build.prop I have already modified just send me a message and I will send you a link to my drive account. I'm trying to create a zip we can flash in recovery that will delete the wrong symilinked files and symlink the correct files to help save us the trouble of this process and for people that don't know how to create a symlink file! But as I stated I'm not a developer so I might be able to but if any developers that could help us by creating 1 for us please please feel free to do so and let us know! But take a look at the 2 lists of symlinked files and delete the necessary files and create the new symlinks that our device needs! If the files show the correct symlinks on 1st boot but you still don't have service click on the symlinks and view its details and you will see it'ssymlinked to the wrong files. Just delete all symlinks and create the correct new 1s.
Example of the d2spr modem symlinked images are:
symlink("/firmware-mdm/image/dsps.b00", "/system/etc/firmware/dsps.b00");
symlink("/firmware-mdm/image/dsps.b01", "/system/etc/firmware/dsps.b01");
symlink("/firmware-mdm/image/dsps.b02", "/system/etc/firmware/dsps.b02");
symlink("/firmware-mdm/image/dsps.b03", "/system/etc/firmware/dsps.b03");
symlink("/firmware-mdm/image/dsps.b04", "/system/etc/firmware/dsps.b04");
symlink("/firmware-mdm/image/dsps.b05", "/system/etc/firmware/dsps.b05");
symlink("/firmware-mdm/image/dsps.mdt", "/system/etc/firmware/dsps.mdt");
symlink("/firmware-mdm/image/modem.b00", "/system/etc/firmware/modem.b00");
symlink("/firmware-mdm/image/modem.b01", "/system/etc/firmware/modem.b01");
symlink("/firmware-mdm/image/modem.b02", "/system/etc/firmware/modem.b02");
symlink("/firmware-mdm/image/modem.b03", "/system/etc/firmware/modem.b03");
symlink("/firmware-mdm/image/modem.b04", "/system/etc/firmware/modem.b04");
symlink("/firmware-mdm/image/modem.b05", "/system/etc/firmware/modem.b05");
symlink("/firmware-mdm/image/modem.b06", "/system/etc/firmware/modem.b06");
symlink("/firmware-mdm/image/modem.b07", "/system/etc/firmware/modem.b07");
symlink("/firmware-mdm/image/modem.mdt", "/system/etc/firmware/modem.mdt");
symlink("/firmware-mdm/image/modem_f2.b00", "/system/etc/firmware/modem_fw.b00");
symlink("/firmware-mdm/image/modem_f2.b01", "/system/etc/firmware/modem_fw.b01");
symlink("/firmware-mdm/image/modem_f2.b02", "/system/etc/firmware/modem_fw.b02");
symlink("/firmware-mdm/image/modem_f2.b03", "/system/etc/firmware/modem_fw.b03");
symlink("/firmware-mdm/image/modem_f2.b04", "/system/etc/firmware/modem_fw.b04");
symlink("/firmware-mdm/image/modem_f2.b05", "/system/etc/firmware/modem_fw.b05");
symlink("/firmware-mdm/image/modem_f2.b06", "/system/etc/firmware/modem_fw.b06");
symlink("/firmware-mdm/image/modem_f2.b07", "/system/etc/firmware/modem_fw.b07");
symlink("/firmware-mdm/image/modem_f2.b08", "/system/etc/firmware/modem_fw.b08");
symlink("/firmware-mdm/image/modem_f2.b09", "/system/etc/firmware/modem_fw.b09");
symlink("/firmware-mdm/image/modem_f2.b10", "/system/etc/firmware/modem_fw.b10");
symlink("/firmware-mdm/image/modem_f2.b13", "/system/etc/firmware/modem_fw.b13");
symlink("/firmware-mdm/image/modem_f2.b14", "/system/etc/firmware/modem_fw.b14");
symlink("/firmware-mdm/image/modem_f2.b21", "/system/etc/firmware/modem_fw.b21");
symlink("/firmware-mdm/image/modem_f2.b22", "/system/etc/firmware/modem_fw.b22");
symlink("/firmware-mdm/image/modem_f2.b23", "/system/etc/firmware/modem_fw.b23");
symlink("/firmware-mdm/image/modem_f2.b25", "/system/etc/firmware/modem_fw.b25");
symlink("/firmware-mdm/image/modem_f2.b26", "/system/etc/firmware/modem_fw.b26");
symlink("/firmware-mdm/image/modem_f2.b29", "/system/etc/firmware/modem_fw.b29");
symlink("/firmware-mdm/image/modem_f2.mdt", "/system/etc/firmware/modem_fw.mdt");
symlink("/firmware-mdm/image/q6.b00", "/system/etc/firmware/q6.b00");
symlink("/firmware-mdm/image/q6.b01", "/system/etc/firmware/q6.b01");
symlink("/firmware-mdm/image/q6.b03", "/system/etc/firmware/q6.b03");
symlink("/firmware-mdm/image/q6.b04", "/system/etc/firmware/q6.b04");
symlink("/firmware-mdm/image/q6.b05", "/system/etc/firmware/q6.b05");
symlink("/firmware-mdm/image/q6.b06", "/system/etc/firmware/q6.b06");
symlink("/firmware-mdm/image/q6.mdt", "/system/etc/firmware/q6.mdt");
symlink("/firmware-mdm/image/tzapps.b00", "/system/etc/firmware/tzapps.b00");
symlink("/firmware-mdm/image/tzapps.b01", "/system/etc/firmware/tzapps.b01");
symlink("/firmware-mdm/image/tzapps.b02", "/system/etc/firmware/tzapps.b02");
symlink("/firmware-mdm/image/tzapps.b03", "/system/etc/firmware/tzapps.b03");
symlink("/firmware-mdm/image/tzapps.mdt", "/system/etc/firmware/tzapps.mdt");
symlink("/firmware-mdm/image/vidc.b00", "/system/etc/firmware/vidc.b00");
symlink("/firmware-mdm/image/vidc.b01", "/system/etc/firmware/vidc.b01");
symlink("/firmware-mdm/image/vidc.b02", "/system/etc/firmware/vidc.b02");
symlink("/firmware-mdm/image/vidc.b03", "/system/etc/firmware/vidc.b03");
symlink("/firmware-mdm/image/vidc.mdt", "/system/etc/firmware/vidc.mdt");
The correct modem images you need to symlink for the d2lterefreshspr are:
symlink("/firmware-mdm/image/dsps.b00", "/system/etc/firmware/dsps.b00");
symlink("/firmware-mdm/image/dsps.b01", "/system/etc/firmware/dsps.b01");
symlink("/firmware-mdm/image/dsps.b02", "/system/etc/firmware/dsps.b02");
symlink("/firmware-mdm/image/dsps.b03", "/system/etc/firmware/dsps.b03");
symlink("/firmware-mdm/image/dsps.b04", "/system/etc/firmware/dsps.b04");
symlink("/firmware-mdm/image/dsps.b05", "/system/etc/firmware/dsps.b05");
symlink("/firmware-mdm/image/dsps.mdt", "/system/etc/firmware/dsps.mdt");
symlink("/firmware-mdm/image/modem.b00", "/system/etc/firmware/modem.b00");
symlink("/firmware-mdm/image/modem.b01", "/system/etc/firmware/modem.b01");
symlink("/firmware-mdm/image/modem.b02", "/system/etc/firmware/modem.b02");
symlink("/firmware-mdm/image/modem.b03", "/system/etc/firmware/modem.b03");
symlink("/firmware-mdm/image/modem.b04", "/system/etc/firmware/modem.b04");
symlink("/firmware-mdm/image/modem.b06", "/system/etc/firmware/modem.b06");
symlink("/firmware-mdm/image/modem.b07", "/system/etc/firmware/modem.b07");
symlink("/firmware-mdm/image/modem.b08", "/system/etc/firmware/modem.b08");
symlink("/firmware-mdm/image/modem.b09", "/system/etc/firmware/modem.b09");
symlink("/firmware-mdm/image/modem.b10", "/system/etc/firmware/modem.b10");
symlink("/firmware-mdm/image/modem.mdt", "/system/etc/firmware/modem.mdt");
symlink("/firmware-mdm/image/modem_fw.b00", "/system/etc/firmware/modem_fw.b00");
symlink("/firmware-mdm/image/modem_fw.b01", "/system/etc/firmware/modem_fw.b01");
symlink("/firmware-mdm/image/modem_fw.b02", "/system/etc/firmware/modem_fw.b02");
symlink("/firmware-mdm/image/modem_fw.b03", "/system/etc/firmware/modem_fw.b03");
symlink("/firmware-mdm/image/modem_fw.b04", "/system/etc/firmware/modem_fw.b04");
symlink("/firmware-mdm/image/modem_fw.b05", "/system/etc/firmware/modem_fw.b05");
symlink("/firmware-mdm/image/modem_fw.b09", "/system/etc/firmware/modem_fw.b09");
symlink("/firmware-mdm/image/modem_fw.b10", "/system/etc/firmware/modem_fw.b10");
symlink("/firmware-mdm/image/modem_fw.b11", "/system/etc/firmware/modem_fw.b11");
symlink("/firmware-mdm/image/modem_fw.b12", "/system/etc/firmware/modem_fw.b12");
symlink("/firmware-mdm/image/modem_fw.b13", "/system/etc/firmware/modem_fw.b13");
symlink("/firmware-mdm/image/modem_fw.b15", "/system/etc/firmware/modem_fw.b15");
symlink("/firmware-mdm/image/modem_fw.b16", "/system/etc/firmware/modem_fw.b16");
symlink("/firmware-mdm/image/modem_fw.b17", "/system/etc/firmware/modem_fw.b17");
symlink("/firmware-mdm/image/modem_fw.b18", "/system/etc/firmware/modem_fw.b18");
symlink("/firmware-mdm/image/modem_fw.b23", "/system/etc/firmware/modem_fw.b23");
symlink("/firmware-mdm/image/modem_fw.b24", "/system/etc/firmware/modem_fw.b24");
symlink("/firmware-mdm/image/modem_fw.b25", "/system/etc/firmware/modem_fw.b25");
symlink("/firmware-mdm/image/modem_fw.b27", "/system/etc/firmware/modem_fw.b27");
symlink("/firmware-mdm/image/modem_fw.b28", "/system/etc/firmware/modem_fw.b28");
symlink("/firmware-mdm/image/modem_fw.b31", "/system/etc/firmware/modem_fw.b31");
symlink("/firmware-mdm/image/modem_fw.fli", "/system/etc/firmware/modem_fw.fli");
symlink("/firmware-mdm/image/modem_fw.mdt", "/system/etc/firmware/modem_fw.mdt");
symlink("/firmware-mdm/image/q6.b00", "/system/etc/firmware/q6.b00");
symlink("/firmware-mdm/image/q6.b01", "/system/etc/firmware/q6.b01");
symlink("/firmware-mdm/image/q6.b03", "/system/etc/firmware/q6.b03");
symlink("/firmware-mdm/image/q6.b04", "/system/etc/firmware/q6.b04");
symlink("/firmware-mdm/image/q6.b05", "/system/etc/firmware/q6.b05");
symlink("/firmware-mdm/image/q6.b06", "/system/etc/firmware/q6.b06");
symlink("/firmware-mdm/image/q6.mdt", "/system/etc/firmware/q6.mdt");
symlink("/firmware-mdm/image/tima_key.b00", "/system/etc/firmware/tima_key.b00");
symlink("/firmware-mdm/image/tima_key.b01", "/system/etc/firmware/tima_key.b01");
symlink("/firmware-mdm/image/tima_key.b02", "/system/etc/firmware/tima_key.b02");
symlink("/firmware-mdm/image/tima_key.b03", "/system/etc/firmware/tima_key.b03");
symlink("/firmware-mdm/image/tima_key.mdt", "/system/etc/firmware/tima_key.mdt");
symlink("/firmware-mdm/image/tima_lkm.b00", "/system/etc/firmware/tima_lkm.b00");
symlink("/firmware-mdm/image/tima_lkm.b01", "/system/etc/firmware/tima_lkm.b01");
symlink("/firmware-mdm/image/tima_lkm.b02", "/system/etc/firmware/tima_lkm.b02");
symlink("/firmware-mdm/image/tima_lkm.b03", "/system/etc/firmware/tima_lkm.b03");
symlink("/firmware-mdm/image/tima_lkm.mdt", "/system/etc/firmware/tima_lkm.mdt");
symlink("/firmware-mdm/image/tima_pkm.b00", "/system/etc/firmware/tima_pkm.b00");
symlink("/firmware-mdm/image/tima_pkm.b01", "/system/etc/firmware/tima_pkm.b01");
symlink("/firmware-mdm/image/tima_pkm.b02", "/system/etc/firmware/tima_pkm.b02");
symlink("/firmware-mdm/image/tima_pkm.b03", "/system/etc/firmware/tima_pkm.b03");
symlink("/firmware-mdm/image/tima_pkm.mdt", "/system/etc/firmware/tima_pkm.mdt");
symlink("/firmware-mdm/image/tzapps.b00", "/system/etc/firmware/tzapps.b00");
symlink("/firmware-mdm/image/tzapps.b01", "/system/etc/firmware/tzapps.b01");
symlink("/firmware-mdm/image/tzapps.b02", "/system/etc/firmware/tzapps.b02");
symlink("/firmware-mdm/image/tzapps.b03", "/system/etc/firmware/tzapps.b03");
symlink("/firmware-mdm/image/tzapps.mdt", "/system/etc/firmware/tzapps.mdt");
symlink("/firmware-mdm/image/vidc.b00", "/system/etc/firmware/vidc.b00");
symlink("/firmware-mdm/image/vidc.b01", "/system/etc/firmware/vidc.b01");
symlink("/firmware-mdm/image/vidc.b02", "/system/etc/firmware/vidc.b02");
symlink("/firmware-mdm/image/vidc.b03", "/system/etc/firmware/vidc.b03");
symlink("/firmware-mdm/image/vidc.mdt", "/system/etc/firmware/vidc.mdt");
symlink("/firmware-mdm/image/wcnss.b00", "/system/etc/firmware/wcnss.b00");
symlink("/firmware-mdm/image/wcnss.b01", "/system/etc/firmware/wcnss.b01");
symlink("/firmware-mdm/image/wcnss.b02", "/system/etc/firmware/wcnss.b02");
symlink("/firmware-mdm/image/wcnss.b04", "/system/etc/firmware/wcnss.b04");
symlink("/firmware-mdm/image/wcnss.mdt", "/system/etc/firmware/wcnss.mdt");

For anyone unsure about creating the symlinks I have a very simple zip file to flash in recovery to delete the bad symlinks and make the right 1s! I have tested on SlimLP, A.I.C.P., Exodusand Pac-Man d2spr Roms. It will not mess up anything on your S3! It only does as stated. If you wanna check it its all in the script-updater. Just flash this after flashing a d2spr Lollipop rom and if you are also confused on modifying the script-updater for the rom so it will flash on the d2lterefreshspr then just flash the TWRP 2.8.7.0 recovery from TWRP's website and you wont have to worry about changing it!
Fixing Modem Symlinks For SPH-L710T.zip
https://drive.google.com/file/d/0B-Zg_yh4ytvLaS1xSzZ3bWhuTVk/view?usp=docslist_api

Hey man this is great! This opens up a whole new world of wonders for this device. You have any idea how I can fix having to manually select apn after each reboot?

triband
RootSuperSU said:
For anyone unsure about creating the symlinks I have a very simple zip file to flash in recovery to delete the bad symlinks and make the right 1s! I have tested on SlimLP, A.I.C.P., Exodusand Pac-Man d2spr Roms. It will not mess up anything on your S3! It only does as stated. If you wanna check it its all in the script-updater. Just flash this after flashing a d2spr Lollipop rom and if you are also confused on modifying the script-updater for the rom so it will flash on the d2lterefreshspr then just flash the TWRP 2.8.7.0 recovery from TWRP's website and you wont have to worry about changing it!
Fixing Modem Symlinks For SPH-L710T.zip
https://drive.google.com/file/d/0B-Zg_yh4ytvLaS1xSzZ3bWhuTVk/view?usp=docslist_api
Click to expand...
Click to collapse
now that i found it, are you going to be around for me to throw questions at. i know what to do but the problems ive had made me leery of flashing.

pgellen said:
now that i found it, are you going to be around for me to throw questions at. i know what to do but the problems ive had made me leery of flashing.
Click to expand...
Click to collapse
Yea man i work til 4-5pm but after that i can try to help ya! My S3 bricked on me and i dont have a 16gb sd to flash the unbrick image to but im always willing to try and help if i can
Sent from my LGLS885 using XDA Labs

rom flashing
RootSuperSU said:
Yea man i work til 4-5pm but after that i can try to help ya! My S3 bricked on me and i dont have a 16gb sd to flash the unbrick image to but im always willing to try and help if i can
Sent from my LGLS885 using XDA Labs
Click to expand...
Click to collapse
well, come to find out flashing octos, made for triband,,,,who knew, not me until today, anyway, its very easy. haha probably easier than ANYTHING i've done up to this point. i dont remember how much i've told you but the triband that i was fighting with so much may have had a problem from the very beginning. getting into recovery continually got harder and harder until it just wouldn't go. i tried about 8 times and it completely died. i mean its dead.im sad for that. that drops me to one sph-l710 with a crumpled usb and so i have to charge it wirelessly which is cool but its fragile. so ive got another refurb triband which im about to flash. WHY? ill be damned if i know why. this phone is rooted and cleaned out and runs beautifully. but, i want more. i guess or im just stupid which by reading this i may be. ill let you know.

triband
pgellen said:
well, come to find out flashing octos, made for triband,,,,who knew, not me until today, anyway, its very easy. haha probably easier than ANYTHING i've done up to this point. i dont remember how much i've told you but the triband that i was fighting with so much may have had a problem from the very beginning. getting into recovery continually got harder and harder until it just wouldn't go. i tried about 8 times and it completely died. i mean its dead.im sad for that. that drops me to one sph-l710 with a crumpled usb and so i have to charge it wirelessly which is cool but its fragile. so ive got another refurb triband which im about to flash. WHY? ill be damned if i know why. this phone is rooted and cleaned out and runs beautifully. but, i want more. i guess or im just stupid which by reading this i may be. ill let you know.
Click to expand...
Click to collapse
tonight if your not busy with other people ill have some questions for you. im looking forward to it. i loaded the rom, gapps and now theupdate has been in a holding cycle for half an hour. it vibrates a little every so often. so i guess ill let it go. i want in so i can finish setting it up. ive got a lot of work to do. i know you must.

Will this zip work for KK roms too? Or is it only Lollipop? I'm willing to test it out but I just want to be sure that I won't brick my S3 since I can't afford a new phone right now.

octos
yakob97 said:
Will this zip work for KK roms too? Or is it only Lollipop? I'm willing to test it out but I just want to be sure that I won't brick my S3 since I can't afford a new phone right now.
Click to expand...
Click to collapse
hey, supersu, help me fix this s3 triband when you get home and you feel like it. i can wait if you need. don't you come from work? let me know however, the biggest problem im having is my bluetooth doesnt work for music. works for everything else,that's a strange one. i'll wait for a reply.

yakob97 said:
Will this zip work for KK roms too? Or is it only Lollipop? I'm willing to test it out but I just want to be sure that I won't brick my S3 since I can't afford a new phone right now.
Click to expand...
Click to collapse
Yes it should work and no flashing it wont brick ur device at all! Nothing is flashed or installed it only deletes the wrong symlinks and creates the correct ones!
Sent from my LGLS885 using XDA Labs

pgellen said:
hey, supersu, help me fix this s3 triband when you get home and you feel like it. i can wait if you need. don't you come from work? let me know however, the biggest problem im having is my bluetooth doesnt work for music. works for everything else,that's a strange one. i'll wait for a reply.
Click to expand...
Click to collapse
Idk how to fix the bluetooth problem! Im not a developer or programmer i just google search alot and read very thoroughly and spend alot of time using FX File Explorer to study my system files! But whats the problem ur having other then bluetooth
Sent from my LGLS885 using XDA Labs

octos
RootSuperSU said:
Idk how to fix the bluetooth problem! Im not a developer or programmer i just google search alot and read very thoroughly and spend alot of time using FX File Explorer to study my system files! But whats the problem ur having other then bluetooth
Sent from my LGLS885 using XDA Labs
Click to expand...
Click to collapse
its about time you showed up again. i thought like these other senior members that once you dealt with the senior citizen with debatable alzheimer's you had fled the country also. hehe man i don't know. on my other triband i had no music at well, no sound at all, none. and i had no cell service. now everything works except the bluetooth on the music. as soon as i boot it up the music locks up. its weird. i was just prepping my phone to go back to stock. i think these tribands are better stock with the bloatware removed and not too much of that. ya, i spend alot of time with my file manager. have you tried total commander? its great. you get it from gizmos freeware. im just getting to know it but i have it on the computer and its pretty good.

pgellen said:
its about time you showed up again. i thought like these other senior members that once you dealt with the senior citizen with debatable alzheimer's you had fled the country also. hehe man i don't know. on my other triband i had no music at well, no sound at all, none. and i had no cell service. now everything works except the bluetooth on the music. as soon as i boot it up the music locks up. its weird. i was just prepping my phone to go back to stock. i think these tribands are better stock with the bloatware removed and not too much of that. ya, i spend alot of time with my file manager. have you tried total commander? its great. you get it from gizmos freeware. im just getting to know it but i have it on the computer and its pretty good.
Click to expand...
Click to collapse
Idk wat to say about that never had that problem! What room are u running? If oct os then ask them about it! I like the Slim Roms and S.O.K.P. the best but thats just me!
Sent from my LGLS885 using XDA Labs

I just flashed the final d2lte CM11 snapshot and your zip file, and it worked! After flashing everything the ROM runs super fast and runs wonderfully! So far as I can tell everything works perfectly. Camera, SMS and MMS, GPS, Mobile Data, and Screen Rotation all work perfectly. My steps for flashing were:
Modify Updater-scripts file to remove device checking
Wipe system, dalvik and cache, and data.
Flash CM11 snapshot
Boot to system
Reboot into recovery and flash Gapps and APN fix (I'm on virgin mobile)

yakob97 said:
I just flashed the final d2lte CM11 snapshot and your zip file, and it worked! After flashing everything the ROM runs super fast and runs wonderfully! So far as I can tell everything works perfectly. Camera, SMS and MMS, GPS, Mobile Data, and Screen Rotation all work perfectly. My steps for flashing were:
Modify Updater-scripts file to remove device checking
Wipe system, dalvik and cache, and data.
Flash CM11 snapshot
Boot to system
Reboot into recovery and flash Gapps and APN fix (I'm on virgin mobile)
Click to expand...
Click to collapse
I never liked CM myself! I prefer Slim or S.O.K.P. Roms more then any other! You can use alot of the non triband roms kernels and tweaks but just not the bootloaders or modems!
Sent from my LGLS885 using XDA Labs

octos
RootSuperSU said:
I never liked CM myself! I prefer Slim or S.O.K.P. Roms more then any other! You can use alot of the non triband roms kernels and tweaks but just not the bootloaders or modems!
Sent from my LGLS885 using XDA Labs
Click to expand...
Click to collapse
guess what? my second triband died last night. just running, fine. so, went to turn it on and it wouldn't come back on. is there any kind of a reset for the samsungs thAT I DONT KNOW ABOUT? the exact same thing happened with the other triband i had. so i take the phone back to the store and they give me another triband, they said. so i get it home and looked at it and immediately knew that it wasn't a triband. it was the original sph-l710 that i bought", to begin with. these guys dont know what they are selling. id like to complain but to who? this is truly a beautiful phone wit the brushed blue metal look and its one of the "grade A" refurbished phone so i guess maybe i have faith that this one will work.however im a little short on faith right now.

Wow! Good luck man. Honestly, if I had to choose I'd want the original one over the tri-band.

broken tribands
canodroid15 said:
Wow! Good luck man. Honestly, if I had to choose I'd want the original one over the tri-band.
Click to expand...
Click to collapse
ill tell you what, when it ran it ran very well. so what i want to know is tell me what you would do with this phone rom wise and maybe point me where to go get it. also i need all the stock files in case i have to flash this. this phone is very easy to fix. way easier than the triband but those had the same problem and i didn't know it until they up and died. so, if you have a minute. i've got all rooted. i've got selinux fixed and so, ....what is the latest liquid out there? by the way i watch the tide religiously. have for years. i also just noticed your logo. are you part of octos? ah, i think i saw your name. so i had octos on my triband when it died but i didnt have bluetooth on music. it worked on phone. tell me how to set up octos. man i liked it but i have to have that bluetooth music. how do i fix that?

rom flashing
RootSuperSU said:
For anyone unsure about creating the symlinks I have a very simple zip file to flash in recovery to delete the bad symlinks and make the right 1s! I have tested on SlimLP, A.I.C.P., Exodusand Pac-Man d2spr Roms. It will not mess up anything on your S3! It only does as stated. If you wanna check it its all in the script-updater. Just flash this after flashing a d2spr Lollipop rom and if you are also confused on modifying the script-updater for the rom so it will flash on the d2lterefreshspr then just flash the TWRP 2.8.7.0 recovery from TWRP's website and you wont have to worry about changing it!
Fixing Modem Symlinks For SPH-L710T.zip
https://drive.google.com/file/d/0B-Zg_yh4ytvLaS1xSzZ3bWhuTVk/view?usp=docslist_api
Click to expand...
Click to collapse
are you active this night? im about to flash octos. first, i want to ask a couple questions,,,first, what about xposed, is that runnable on a sph-l710? what about dirty? i know it wouldn't run on a triband but this 710? ok enough. how about googles N? is it.

pgellen said:
are you active this night? im about to flash octos. first, i want to ask a couple questions,,,first, what about xposed, is that runnable on a sph-l710? what about dirty? i know it wouldn't run on a triband but this 710? ok enough. how about googles N? is it.
Click to expand...
Click to collapse
Since you're not on a triband just flash the d2spr build, not the d2refresh build. You can run xposed on our ROM if you wish. We always recommend a clean flash, especially if coming from stock or any other ROM. Even if its Oct-L to Oct-M. ??