New camera from UVALH2 - T-Mobile, Samsung Galaxy SIII

So I liked the ability to do the color differentiate thing and other little mods I noticed with the new camera... but I don't like the builds we have right now as I'm seeing to much TouchWiz lag in them... (came JB lol) so I just pulled it from WildChild's rom.
You need to install it by renaming the old camera file (located in /system/app) SamsungCamera.apk.bak this is as a backup just in case you dont like the new app for whatever reason.
copy and paste the file to /system/app/
reboot
Then it should work. Check permissions as I did and it wasn't set properly even though the camera functioned properly...
Easier then I thought and wrote up.
Be sure to wipe cache after all is done just in case as @DocHoliday77 suggested.
Yes I just did this process all over again.
http://dl.dropbox.com/u/92214305/SamsungCamera.apk
http://i45.tinypic.com/1zxxrux.png
http://i49.tinypic.com/jkaz9i.png
Confirmed on: Wicked [v2]
I'm sure this will work on any TouchWiz rom, waiting on confirmations.
any questions ask away I'll check frequently and update post if need be...

I tried this and wasn't able to get the camera to work. I'm running stock rom on tmobile but have upgraded to the UVLH2 radio.
I renamed the SamsungCamera.apk to SamsungCamera.apk.bak
I copied the file you posted to the /system/app folder
I set the permissions to what you posted in your pic
I rebooted and when I tried to use the camera I got a force close.
I rebooted again and still got a force close error.
I then tried installing the camera by clicking on the apk in root explorer. It told me the camera failed to install.
At that point I just reverted back to my old camera app. Is there something different I should be doing?

Looks like i should right the instructions a little better... I'll do a better right up in a little bit when i can get to my computer.
Sent from my SGH-T999 using xda premium

Try unchecking Execute.

updated, it's actually stupid simple copy and paste, and reboot that's all I did and then took a picture.

@mt3g
What rom base are you currently on?
Reason I ask is cause there is quite a change between the first two and the latest update.
If you're on an older base some things from the latest may not work correctly.
If you are running one of the first two, and it works fine then at least we know that's not the case here.
Sent from my SGH-T999 using xda app-developers app
---------- Post added at 05:11 PM ---------- Previous post was at 05:08 PM ----------
infinitron said:
I tried this and wasn't able to get the camera to work. I'm running stock rom on tmobile but have upgraded to the UVLH2 radio.
I renamed the SamsungCamera.apk to SamsungCamera.apk.bak
I copied the file you posted to the /system/app folder
I set the permissions to what you posted in your pic
I rebooted and when I tried to use the camera I got a force close.
I rebooted again and still got a force close error.
I then tried installing the camera by clicking on the apk in root explorer. It told me the camera failed to install.
At that point I just reverted back to my old camera app. Is there something different I should be doing?
Click to expand...
Click to collapse
Whenever you replace an app in /system/app, its a good idea to boot recovery and wipe cache and dalvik. Try doing that and let us know!
Sent from my SGH-T999 using xda app-developers app

Wicked [v2]
tested out all the features color chooser, cartoon, panorama, FFC & back camera recording, all work 100%

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I followed the instructions in the OP and it's working perfectly.
Thanks!
Sent from my SGH-T999 using xda premium

@Ozzywhat rom are you on, glad it worked.
@Doc I'll add that it's best to wipe cache after wards, thanks.

mt3g said:
@Ozzywhat rom are you on, glad it worked.
Click to expand...
Click to collapse
I'm on Wicked V2.

Alright that's good, need other's to try it out and see if we got lucky, I don't see how it'd be too different from other TW based roms though.

Just tried this myself and it worked great. I am running the new update (deodexed stock) and I didn't have the new camera. Just wanted to let everyone know that it was working on deodexed stock as well
Sent from my SGH-T999 using xda app-developers app

trimble83 said:
Just tried this myself and it worked great. I am running the new update (deodexed stock) and I didn't have the new camera. Just wanted to let everyone know that it was working on deodexed stock as well
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
I'm just on rooted stock UVALH2 and followed OP instructions, wipe, wipe dalvik cache and nothing happened. Still stock without added options.
Do I have to be on a custom rom?
Thanks

It is the same as the CM10 camera. What other features did you add? It works well but it is missing the burst mode and storage location to save the photos.
Oh, and I didn't have to wipe data or non of that! but just copied/pasted and reboot.

eggnoodle said:
I'm just on rooted stock UVALH2 and followed OP instructions, wipe, wipe dalvik cache and nothing happened. Still stock without added options.
Do I have to be on a custom rom?
Thanks
Click to expand...
Click to collapse
I'm curious, how did you update? Did yoh flash the rooted rom? Or did you install the full update via kies or odin. Or did you install the ota update?
I've been suspecting the following for a while now but could never get an answer to confirm.
Basically if you just flash the rooted update, you are going to miss out on a number of other firmware updates to other parts of your phone. Flashing the rom does not update the other partitions like installing via kies or odin will.
I could be wrong here or at least in your case, but not having the FULL update installed could cause exactly what you are seeing.
Just food for thought but would love to hear others input on this theory.
Note: you could try the dialer code mentioned in another thread to try updating JUST the camera firmware. I think its in general.
Sent from my SGH-T999 using xda app-developers app

DocHoliday77 said:
I'm curious, how did you update? Did yoh flash the rooted rom? Or did you install the full update via kies or odin. Or did you install the ota update?
I've been suspecting the following for a while now but could never get an answer to confirm.
Basically if you just flash the rooted update, you are going to miss out on a number of other firmware updates to other parts of your phone. Flashing the rom does not update the other partitions like installing via kies or odin will.
I could be wrong here or at least in your case, but not having the FULL update installed could cause exactly what you are seeing.
Just food for thought but would love to hear others input on this theory.
Note: you could try the dialer code mentioned in another thread to try updating JUST the camera firmware. I think its in general.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
i flashed wildchld rooted rom.
Sent from my SGH-T999 using Tapatalk 2

mt3g said:
@Ozzywhat rom are you on, glad it worked.
@Doc I'll add that it's best to wipe cache after wards, thanks.
Click to expand...
Click to collapse
Thanks for the share by the way!
I've not updated yet and have a number of 'tests' I want to play with. Just added this to the list!
Sent from my SGH-T999 using xda app-developers app

This may help for those who haven't seen it.
This is quoted from another thread.
Post by nyyankees3511
"Theres also a new camera firmware that you need to update manually, previously mine showed zdfe02 and now its updated to zdff03. To do so go to the dialer and type *#34971539# then hit “Phone / CAM FW Ver check” and if the phone FW is different than the cam FW you then hit "phone to cam FW write (rear)" and reboot."
Ok, I am currently running UVALG1 via wildchlds flashable rom. I installed the camera as per op and worked great! So my theory was at least part if not fully wrong.
However I have a question/request of anyone willing. Enter the dialer code from above and choose the first option Check Camera fw Ver. A toast will popup telling what your cameras and phones versions are. Mine said zdfe02 for both, but as stated above, his said one was zdff03.
Would you guys be willing to do that and let me know what it says? I figure zdff03 will show up if you have updated to UVALH2.
Thanks in advance! Hope I'm not annoying you with this stuff, I just want to know more!!!
Sent from my SGH-T999 using xda app-developers app

Fine by me I did and was on 2 plus all the numbers. I updated through windchilds Rom not Odin nor Kies...
Sent from my SGH-T999 using xda premium

DocHoliday77 said:
This may help for those who haven't seen it.
This is quoted from another thread.
Post by nyyankees3511
"Theres also a new camera firmware that you need to update manually, previously mine showed zdfe02 and now its updated to zdff03. To do so go to the dialer and type *#34971539# then hit “Phone / CAM FW Ver check” and if the phone FW is different than the cam FW you then hit "phone to cam FW write (rear)" and reboot."
Ok, I am currently running UVALG1 via wildchlds flashable rom. I installed the camera as per op and worked great! So my theory was at least part if not fully wrong.
However I have a question/request of anyone willing. Enter the dialer code from above and choose the first option Check Camera fw Ver. A toast will popup telling what your cameras and phones versions are. Mine said zdfe02 for both, but as stated above, his said one was zdff03.
Would you guys be willing to do that and let me know what it says? I figure zdff03 will show up if you have updated to UVALH2.
Thanks in advance! Hope I'm not annoying you with this stuff, I just want to know more!!!
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
i have both zdfe02 for cam FW. I'm on UVALH2 but still on old baseband UVLEM. I'm wondering if this is causing me not to be able to get the updated cam??

Related

[MARVELC][ROM][CM7 Base] HC MIUI 1

Features:
based on latest CM7 by alquez
Root, Su, Busybox
Zipaligned
Removed crap like live wallpapers, androidian, cyanbread, ...
Latest apps included: market, google search, superuser (no need to flash a gapps.zip)
MIUI bootanimation, wallpapers, fonts
Following MIUI apps: camera, gallery, browser, file manager, compass, launcher, sound recorder
MIUI theme from jasonevil included, optimized by Henry_01
Modded FM Radio and lockscreen for MIUI style
Working:
Whats not listed below
Broken:
roaming indicator is always on -- fix in the works
Wifi Hotspot
FM Radio
MMS
you tell me anything else you find
How to install:
***If you are on official CWM 5.0.2.8 you must downgrade using this
This is a known issue and raised with koush.
Put rom on SD card
Reboot in recovery
Factory reset
Install rom zip
Reboot phone
Follow Setup
Enjoy!
Download
Also available on goo-inside.me app and rom manager
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
​
Thanks:
Henry_01 for original rom
simonsimons34 for kernel
Wow!
Downloading now. Testing soon. Will report back bugs!
bobdamnit said:
Wow!
Downloading now. Testing soon. Will report back bugs!
Click to expand...
Click to collapse
Be sure you have the right recovery
You might want to add what works and what doesn't to the op great work anyway
Sent from my Wildfire S using Tapatalk 2 Beta-2
jmztaylor said:
Be sure you have the right recovery
Click to expand...
Click to collapse
Way ahead of ya. I never got official CWM to play properly, so I downgraded back to alquez's a few weeks ago.
bobdamnit said:
Way ahead of ya. I never got official CWM to play properly, so I downgraded back to alquez's a few weeks ago.
Click to expand...
Click to collapse
Me and simon figured out cm7 will not flash at all correctly on the official. How ironic is that?
jmztaylor said:
Me and simon figured out cm7 will not flash at all correctly on the official. How ironic is that?
Click to expand...
Click to collapse
Official (as well as alquez's) doesn't fix permissions properly. Official doesn't log properly, and half the time it wont restore nandroids properly.
Alquez's works better, so I'm sticking with it for now.
Ive been trying to build a fully working recovery for a while (considering how small they are) and just have been having problems with it. Seems impossible almost to fix the bugs.. One after another. I will try to fix the bugs in my cm7 alpha, see if we can get everything working. If we can then it shouldnt be too hard here
bobdamnit said:
Will report back bugs!
Click to expand...
Click to collapse
Same bugs as CM7.
Camera reboots phone. Must pull battery for it to boot again, otherwise hangs at bootscreen.
Bluetooth turns on, does not pair with anything.
Cant test MMS. Auto converts to SMS by splitting, settings don't stick to allow over 160 character MMS. Can't use camera to record or take picture...
I do get data signal, and it works, so I would assume MMS would work with a fix. (MetrOFF, or manually adding data information.)
Will this work with cwm 5.0.2.6?
Sent from my HTC_A510c using Tapatalk
djthebogan said:
Will this work with cwm 5.0.2.6?
Sent from my HTC_A510c using Tapatalk
Click to expand...
Click to collapse
Thats the one he wants you to use. I have it as recovery, flashed this just fine.
bobdamnit said:
Same bugs as CM7.
Camera reboots phone. Must pull battery for it to boot again, otherwise hangs at bootscreen.
Bluetooth turns on, does not pair with anything.
Cant test MMS. Auto converts to SMS by splitting, settings don't stick to allow over 160 character MMS. Can't use camera to record or take picture...
I do get data signal, and it works, so I would assume MMS would work with a fix. (MetrOFF, or manually adding data information.)
Click to expand...
Click to collapse
I wonder if I broke camera somehow? Because it did work. I even told simon how surprised i was when it worked...will look into that...
Flashed this last night. It booted fine, but when I got to the setup screen, the touchscreen is dead. Went back to my latest backup
My wfs is marvelc (metropcs),unlocked bl, s-off, rooted. Latest ota update to 1.10 bl.
I'm running insink71's 1.1 metro Rom (running great!). His two metro roms are the only ones that have ever worked for me.
Have not been able to flash any oc kernels or roms because of this. Would really like to oc. Any help will be greatly appreciated.
chicle_11 said:
Flashed this last night. It booted fine, but when I got to the setup screen, the touchscreen is dead. Went back to my latest backup
My wfs is marvelc (metropcs),unlocked bl, s-off, rooted. Latest ota update to 1.10 bl.
I'm running insink71's 1.1 metro Rom (running great!). His two metro roms are the only ones that have ever worked for me.
Have not been able to flash any oc kernels or roms because of this. Would really like to oc. Any help will be greatly appreciated.
Click to expand...
Click to collapse
Chicle, I have the same setup, same phone, same carrier, same hboot.
I can OC just fine. Jmz's kernel doesn't work for me. It just bootloops. Mindh4x8r's kernel bootloops twice, then proceeds to boot for me. Try Mindh4x8r's kernel without swap and see if that works. Make sure you wipe cache and Dalvik cache first!
I installed this last night and had a couple issues. When it would first boot up it would run nice and smooth but would soon start lagging a bit. I was looking at the frequency settings for the processor and it defaults at around 864mhz. By default my minimum was set at same, which seems very high. I reset the minimum frequency and it wouldn't stick to what I would change it to. After a couple reboots my minimum was at 120, even when I set it for something else, but it was just running slow. Camera didn't work for me either.
Sent from my HTC_A510c using Tapatalk
bobdamnit said:
Chicle, I have the same setup, same phone, same carrier, same hboot.
I can OC just fine. Jmz's kernel doesn't work for me. It just bootloops. Mindh4x8r's kernel bootloops twice, then proceeds to boot for me. Try Mindh4x8r's kernel without swap and see if that works. Make sure you wipe cache and Dalvik cache first!
Click to expand...
Click to collapse
I've tried all the kernels with the same results. Only rom that works for me is insink71's metro. Others boot, but to a dead touchscreen.
chicle_11 said:
I've tried all the kernels with the same results. Only rom that works for me is insink71's metro. Others boot, but to a dead touchscreen.
Click to expand...
Click to collapse
Definitely odd. But it kind of confirms what I've been suspecting for a while.
Most MetroPCS phones are identical, however I believe that they came out with a revised device later. My friend has the exact same phone as us, however his (Stock, he wont let me mod it) phone tells me its a hardware 1.1, where mine is a hardware 1.0. It tells you in the "About phone" settings menu. (Stock, insink's MPCS1.0 and 1.1) No other ROM will tell you this information.
Could you report back on which hardware version you have?
chicle_11 said:
I've tried all the kernels with the same results. Only rom that works for me is insink71's metro. Others boot, but to a dead touchscreen.
Click to expand...
Click to collapse
bobdamnit said:
Definitely odd. But it kind of confirms what I've been suspecting for a while.
Most MetroPCS phones are identical, however I believe that they came out with a revised device later. My friend has the exact same phone as us, however his (Stock, he wont let me mod it) phone tells me its a hardware 1.1, where mine is a hardware 1.0. It tells you in the "About phone" settings menu. (Stock, insink's MPCS1.0 and 1.1) No other ROM will tell you this information.
Could you report back on which hardware version you have?
Click to expand...
Click to collapse
Can both of you run this command when you are running a normal functioning Rom. Preferably stockish. Not custom kernel
adb pull /proc/config.gz
And attach here if it allows that extension
Sent from my HTC_A510c using xda premium
jmztaylor said:
Can both of you run this command when you are running a normal functioning Rom. Preferably stockish. Not custom kernel
adb pull /proc/config.gz
And attach here if it allows that extension
Sent from my HTC_A510c using xda premium
Click to expand...
Click to collapse
It doesn't alllow that extension. Will up them to dropbox and post link. Currently running this ROM, so lemme flash back to MPCS 1.1 and get it done.
---------- Post added at 05:48 PM ---------- Previous post was at 05:03 PM ----------
Aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaand here ya go.
http://dl.dropbox.com/u/52903366/WFS Files/JMZ/config.gz
bobdamnit said:
It doesn't alllow that extension. Will up them to dropbox and post link. Currently running this ROM, so lemme flash back to MPCS 1.1 and get it done.
---------- Post added at 05:48 PM ---------- Previous post was at 05:03 PM ----------
Aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaand here ya go.
http://dl.dropbox.com/u/52903366/WFS Files/JMZ/config.gz
Click to expand...
Click to collapse
Thanks I will look at it when I get home. You willing to do some kernel testing soon?
Sent from my HTC_A510c using xda premium

[ROM] Vanilla AOSP 4.0.4 IMM76L with root and busybox (Updated with MODS) 6/12/12

Hey everyone.
I just wanted to share an ultra prestine build of the latest AOSP source, sync'ed tonight and compiled clean. I know there are ROMs with all sorts of great mods, pieces taken from CM9 and AOKP, linaro optimization, etc.... that isn't this ROM. This is simply the latest Google source of 4.0.4 IMM76L with root and busybox.
I built it for me and thought I'd share. Feel free to use it... or not.
As always, don't forget to Nandroid.
ROM:
http://www.mediafire.com/?o9xkbxocy3yqhf5
3/12/12 11:30pm - Updated so reported model is "Galaxy Nexus". Thanks al2x for pointing it out.
The latest ICS GAPPS work for this one too:
http://goo.im/gapps/gapps-ics-20120429-signed.zip
MODS:
The following mods I've tested and work with this ROM:
Mods found in mwalts AOSP ROM also work for mine.
http://forum.xda-developers.com/showthread.php?t=1631796
Native Tethering Patch (mwalt2)
http://d-h.st/6se
Enhanced Power Menu with Native Tether (mwalt2)
http://d-h.st/RdT
Battery with Percentage Mod (CMO220)
http://dl.dropbox.com/u/31971676/BatMod.zip
Stock Boot Animation - hi-res (Thanks NHLWil)
http://forum.xda-developers.com/showpost.php?p=27332536&postcount=13
Keyboard APK with dictionary (for now)
http://www.mediafire.com/?qdavsrl5c64rxbf
I've been struggling to get all my binaries together to build from source and what
I have to know are tethering provisions removed in a build like this?
****Tether Subscription Check is not removed in build 061112_211425****
doobie711 said:
I've been struggling to get all my binaries together to build from source and what
I have to know is are tethering provisions removed in a build like this?
Click to expand...
Click to collapse
I don't think anything is taken out from vanilla to prevent you from using a tethering app for rooted phones in the market. I don't tether so I don't know for sure though.
I was referring to the native ICS tethering option under "More..." in "Settings". I'll try it out and update my own post with an answer.
This is great, I hope you can continue this style of being 100% stock with root/bb as the updates continue to flow for the GN...
I'm going to be flashing soon but I do tether so I hope it bypasses the subscription check...
It does not bypass the subscription check. but I'm pretty sure an edit of the framework.apk can fix that.
I'll try to update op with some mods tomorrow.
Sent from my Full AOSP on Toro-VZW using Tapatalk 2
doobie711 said:
I was referring to the native ICS tethering option under "More..." in "Settings". I'll try it out and update my own post with an answer.
Click to expand...
Click to collapse
You have to make a couple changes to the device repo to get the stock ICS tethering options included.
imnuts said:
You have to make a couple changes to the device repo to get the stock ICS tethering options included.
Click to expand...
Click to collapse
Thanks. I think I found the changes. I'll give it a shot when I get home from work.
Updated OP with Tethering, Menu, and Battery mod links.
mmuzzy, I've been using the ROM and it's been pretty snappy. The first flash didn't go so well, there were a few force close/force waits but i reflashed it now with a new download and I think it's been good.
One request is if you could possibly edit the name computers pickup as the MTP device... it recognizes it as "Full AOSP on Toro-VZW" rather than simply "Galaxy Nexus" lol
If there is any way you could include the stock Galaxy Nexus boot animation, that would be great, otherwise this rom is great!
thanks
Snakehn said:
If there is any way you could include the stock Galaxy Nexus boot animation
Click to expand...
Click to collapse
Attached.
Higher definition versions here:
http://forum.xda-developers.com/showthread.php?t=1380655
This intrigues me. Might try it soon. I've wanted a 100% stock build and nobody had really made one. They all usually come with "tweaks and enhancements" pre installed.
Sent from my Galaxy Nexus using xda premium
Edit: flashed it so far so good but it thinks every word I type is wrong. As well as the IME switcher always being shown when typing and no other keyboards installed
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Edit #2: saw a thread about a differnt rom needing specific gapps and without them it would do that gonna flash the ones from OP even though I have the 429 gapps already
Edit #3: thought that fixed it but it didn't. Maybe with a clean install with the gapps. I'll have to try in the morning.
Edit...again: more searching is bringing up that the ICS dictionary is missing or that there is a problem with the keyboard apk.
al2x said:
mmuzzy, I've been using the ROM and it's been pretty snappy. The first flash didn't go so well, there were a few force close/force waits but i reflashed it now with a new download and I think it's been good.
One request is if you could possibly edit the name computers pickup as the MTP device... it recognizes it as "Full AOSP on Toro-VZW" rather than simply "Galaxy Nexus" lol
Click to expand...
Click to collapse
Snakehn said:
If there is any way you could include the stock Galaxy Nexus boot animation, that would be great, otherwise this rom is great!
thanks
Click to expand...
Click to collapse
NHLWil said:
Attached.
Higher definition versions here:
http://forum.xda-developers.com/showthread.php?t=1380655
Click to expand...
Click to collapse
Op updated with changes. Thanks.
Anthonok said:
This intrigues me. Might try it soon. I've wanted a 100% stock build and nobody had really made one. They all usually come with "tweaks and enhancements" pre installed.
Sent from my Galaxy Nexus using xda premium
Edit: flashed it so far so good but it thinks every word I type is wrong. As well as the IME switcher always being shown when typing and no other keyboards installed
Edit #2: saw a thread about a differnt rom needing specific gapps and without them it would do that gonna flash the ones from OP even though I have the 429 gapps already
Edit #3: thought that fixed it but it didn't. Maybe with a clean install with the gapps. I'll have to try in the morning.
Edit...again: more searching is bringing up that the ICS dictionary is missing or that there is a problem with the keyboard apk.
Click to expand...
Click to collapse
Weird. I didn't notice that because I use SwiftX. Thanks for pointing it out. I don't know that is yet.
Anthonok said:
This intrigues me. Might try it soon. I've wanted a 100% stock build and nobody had really made one. They all usually come with "tweaks and enhancements" pre installed.
Sent from my Galaxy Nexus using xda premium
Edit: flashed it so far so good but it thinks every word I type is wrong. As well as the IME switcher always being shown when typing and no other keyboards installed
Edit #2: saw a thread about a differnt rom needing specific gapps and without them it would do that gonna flash the ones from OP even though I have the 429 gapps already
Edit #3: thought that fixed it but it didn't. Maybe with a clean install with the gapps. I'll have to try in the morning.
Edit...again: more searching is bringing up that the ICS dictionary is missing or that there is a problem with the keyboard apk.
Click to expand...
Click to collapse
I'm not sure why the keyboard as compiled from source doesn't have the dictionary but I installed a different keyboard apk and the dictionary works. Weird.
Edit: I put the APK in OP
mmuzzy said:
I'm not sure why the keyboard as compiled from source doesn't have the dictionary but I installed a different keyboard apk and the dictionary works. Weird.
Edit: I put the APK in OP
Click to expand...
Click to collapse
Didn't work for me still showing everything as wrong. If I turn off auto correction in the keyboard settings and use SwiftKey it works fine. It'll have to do for now
Sent from my Full AOSP on Toro-VZW using xda premium
Anthonok said:
Didn't work for me still showing everything as wrong. If I turn off auto correction in the keyboard settings and use SwiftKey it works fine. It'll have to do for now
Sent from my Full AOSP on Toro-VZW using xda premium
Click to expand...
Click to collapse
That's strange. I had the Dictionary issue until I used this APK.
I navigated to where the APK was in ES Explorer, clicked it, it asked if I wanted to replace the system file and after that I had word suggestions as I type.
mmuzzy said:
That's strange. I had the Dictionary issue until I used this APK.
I navigated to where the APK was in ES Explorer, clicked it, it asked if I wanted to replace the system file and after that I had word suggestions as I type.
Click to expand...
Click to collapse
Exactly what i did. But still doesn't work with stock keyboard.
Sent from my Full AOSP on Toro-VZW using xda premium
Anthonok said:
Exactly what i did. But still doesn't work with stock keyboard.
Sent from my Full AOSP on Toro-VZW using xda premium
Click to expand...
Click to collapse
That is strange. I also notice that unlike what I had happening you actually have some words that aren't highlighted. So either you added them or maybe the language isn't set? In the Notification area does yours say "English (US)" in input method when the keyboard is up?

[APP]|Glazed Mods|A New Way To Mod|Beta|6-22-12|

Hey forum i back yet again, this time i present to you a new kind of app its called glazed mods. This app is so uniques to all the others, well maybe it may only be one of a kind. So what does this app do, easy it allows you to download the mods that are posted on it. I thought to myself, hmm why not make anyone on any rom enjoy this app, so i am, currently all of the apps are working on glazed ICS, any other rom such as gederom can only download the ones with a little orange plus on them.
By what i mean this app is one of a kind i mean that it uses a new way of presenting apps to you. So what makes it unique is that it is a WebView loading a 600*1024 flash website. It fits perfectly to your screen and the abbilities of flash is customization, and many other little tweaks that this app can support.
Things you need to know
Do not click an item multiple times it might cause the app to crash
There is an update feature that downloads the latest update of the roms listed, if you want to see more roms. Contact me or comment below, need devs permission.
You will recieve automatic updates but not by updating the app.
Please report any bugs in the request section
YOU NEED FLASH INSTALLED
Screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Version 1.2 - Download
Version 1.1 - Download
Version 1.2 - Fixed the weird freeze after download
Version 1.1 - Initial release
If you want to see a mod or something you find, just post it in the request section and as always guys ENJOY.
BIG THANKS TO POWERPOINT45​
thank you for this it works very well. I also wanted to know of the reboot into recovery worked.
Sent from my Galaxy Nexus using xda premium
Hi Hyperrunner, excited to try this, if I already have Mods installed on glazed will this detect them and let me disable them if I want to, or do I have to install them through the app itself? Thanks
I made this app and he made the website. just saying. We work as a great team. XD. I like XDA cause u can take out the A and it makes a cool face. XD
Just tell me if u want the source code. A thanks would be appreciated. Hope we never depreciate that meathod.
Sent from my Glazed ICS using XDA
TahrirSquare said:
Hi Hyperrunner, excited to try this, if I already have Mods installed on glazed will this detect them and let me disable them if I want to, or do I have to install them through the app itself? Thanks
Click to expand...
Click to collapse
You have to install through the app in order to detect that it is downloaded. But you can reflash glazed ics or any other rom and it will delete all the mods.
Yes reboot into recovery works, but if you are using FFF 1.4a it doesnt (The one that can have 2 roms at a time)
alright thanks for the info
Thanks!
Well, there goes any chance of my getting anything productive done today. I am just going to have to play with this.
Thanks, guys, I appreciate all your work.
Very cool app! Used it to get the inverted market on AOKP and everything worked perfectly. Can't wait to see even more mods!
Hyperrunner said:
Yes reboot into recovery works, but if you are using FFF 1.4a it doesnt (The one that can have 2 roms at a time)
Click to expand...
Click to collapse
just wanted to comment on this. fff1.4a is the latest available bootloader, and works with reboot recovery option.
dual-boot fff extended does not.
one question about the app, why does it need su?
Sent from my HTC Glacier using xda premium
Sorry, yeah thats what i meant, im not sure your going to have to talk to powerpoint since he made the app.
smirkis said:
just wanted to comment on this. fff1.4a is the latest available bootloader, and works with reboot recovery option.
dual-boot fff extended does not.
one question about the app, why does it need su?
Sent from my HTC Glacier using xda premium
Click to expand...
Click to collapse
It needs su because It installs a custom virus. JK.I am using a lot of native code such as wget and that's why I need switch user permissions. It was not working until I added su -c.If you look in the super user logs you can see all commands it uses.
Sent from my Galaxy Nexus using XDA
powerpoint45 said:
It needs su because It installs a custom virus. JK.I am using a lot of native code such as wget and that's why I need switch user permissions. It was not working until I added su -c.If you look in the super user logs you can see all commands it uses.
Sent from my Galaxy Nexus using XDA
Click to expand...
Click to collapse
The download link just takes me to minus.com. I do I need to set up an account to download? Haven't tried from a pc browser yet.
Sent from my Galaxy Nexus using Tapatalk 2
We are having many problems with minus. It either works or it doesnt. We are thinking of reuploading but we have no money for a direct link service were only using minus because its free. Do you have any other direct link service other than dropbox?
Oh a fix for your problem maybe would be to clear cache and data then reboot and it should work.
If that doesnt work you can use the pc version. Its not the best size in the world but it works.
http://hyperrunner.wix.com/glazeydone
Dont ask about the weird name.
powerpoint45 said:
I made this app and he made the website. just saying. We work as a great team. XD. I like XDA cause u can take out the A and it makes a cool face. XD
Just tell me if u want the source code. A thanks would be appreciated. Hope we never depreciate that meathod.
Sent from my Glazed ICS using XDA
Click to expand...
Click to collapse
I for one would like to see a source code if you don't mind
Hyperrunner said:
We are having many problems with minus. It either works or it doesnt. We are thinking of reuploading but we have no money for a direct link service were only using minus because its free. Do you have any other direct link service other than dropbox?
Oh a fix for your problem maybe would be to clear cache and data then reboot and it should work.
If that doesnt work you can use the pc version. Its not the best size in the world but it works.
http://hyperrunner.wix.com/glazeydone
Dont ask about the weird name.
Click to expand...
Click to collapse
I tried it a couple times and now all is well. Everything works fantastically. Really like the selection of inverted mods.
Sent from my Galaxy Nexus using Tapatalk 2
Has anyone tried the Eyecandy theme with gederom?
I know it's listed as not compatible with all ROMs but I swear I thought I had read in a thread somewhere that someone had used it w/ gederom successfully.
Is it possible for you to add some features from the SGT7 rom as a flashable mod?
---------- Post added at 12:09 PM ---------- Previous post was at 11:48 AM ----------
Hyperrunner said:
We are having many problems with minus. It either works or it doesnt. We are thinking of reuploading but we have no money for a direct link service were only using minus because its free. Do you have any other direct link service other than dropbox?
Oh a fix for your problem maybe would be to clear cache and data then reboot and it should work.
If that doesnt work you can use the pc version. Its not the best size in the world but it works.
http://hyperrunner.wix.com/glazeydone
Dont ask about the weird name.
Click to expand...
Click to collapse
You could try this site. I just tried it and it seems to work fine and has direct linking.
http://www.peejeshare.com/upload
Source code
rukin5197 said:
I for one would like to see a source code if you don't mind
Click to expand...
Click to collapse
For anyone who wants the source code, here it is:
https://dl.dropbox.com/u/86322124/Glazed Mods 1.1.zip
It is set up to compile for android 4.0
Anyone else experience this?
After using the app and installing the inverted play store i was stuck at the boot animation, let it sit for 30 min with no luck so i had to restore a backup.
Knowing how stupid i am i went to restore a backup and i forgot that i had deleted both the rom zip and my backups from my sd card so i had to get out the ol' laptop, download the rom again and mount through twrp to install. Last part was totally my fault
But anyways im going to try to induce the same problem and see if i can pull the log to see what was going on. Shouldve done that in the first place but again Beer does impair my thinking haha!
apply at goo.im for a dev account. u get hosting, and goo manager access which kind of does what your trying to do with this. or just use it for hosting.

[AT&T] [MOD] Prevent SMS and MMS From Showing Up In Your Phone Log

Stock phone log gets clogged up with all sent and received SMS logs and I've come across many requests to remove this annoying feature. So based on information provided on XDA (I'd give explicit credits but can't find the original threads) I put together a mod that will prevent SMS and MMS from showing up in the log.
This will only prevent new messages from showing up in the log so after installing this you might need to clear your old log.
Instructions: Put the NoSMSLog_UCALG1.zip in /sdcard folder on your phone and install with Clockworkmod recovery.
I have tested this only on a Samsung Galaxy s3 with rooted stock AT&T rom including the latest update.
(This might also work without CWM by renaming file to update.zip and installing with stock recovery but I haven't tested this.)
Edit: Some have reported errors when flashing so I'm posting the apk and odex file so you can replace the files yourself with root explorer. Both files are supposed to go in the system/app folder and you'll have to mount rw permissions in root explorer.
LogsProvider.zip
Update: It should work now, I've updated the mod.
Update: credit: wilfredcool007
Or just clicking menu and view options and choose only calls....
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Optimizer said:
Or just clicking menu and view options and choose only calls....
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
It's been reported that it keeps resetting itself every time the phone is restarted but most importantly some people don't want that stuff logged.
sentry07 said:
Stock phone log gets clogged up with all sent and received SMS logs and I've come across many requests to remove this annoying feature. So based on information provided on XDA (I'd give explicit credits but can't find the original threads) I put together a mod that will prevent SMS and MMS from showing up in the log.
This will only prevent new messages from showing up in the log so after installing this you might need to clear your old log.
Instructions: Put the file in /sdcard folder on your phone and install with Clockworkmod recovery.
I have tested this only on a Samsung Galaxy s3 with rooted stock AT&T rom including the latest update.
(This might also work without CWM by renaming file to update.zip and installing with stock recovery but I haven't tested this.)
Click to expand...
Click to collapse
If this mod is based on this one, this solution removes the logs which is a bad idea, and this may cause Email app FC.
You can follow this HowTo, it just set the "View by" to "All calls".
Optimizer said:
Or just clicking menu and view options and choose only calls....
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
It doesn't save your choice.
It's not based on the post you mentioned (I actually don't know what method was used there), when I find the original thread I'll be sure to give credit.
I tested this and stock email app works fine on my phone.
oh, sorry, I thought it saved the choice...
Kind of dumb that it doesn't.. Thanks for the mod!
its for the men who talk to other chics behind their girlfriend/wife's back. so when the wife checks the phone, she won't see the logs. women be getting smarter about checking stuff in men's phones
Optimizer said:
Or just clicking menu and view options and choose only calls....
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Tried that and it worked perfect. No need to install the zip. Imo
Optimizer said:
Or just clicking menu and view options and choose only calls....
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Well, someone slap the Easy button! Thank you. That saved a lot of trouble.
End subspace transmission from NCC-1701E
Bajanman said:
Tried that and it worked perfect. No need to install the zip. Imo
Click to expand...
Click to collapse
Doesn't it show all next time you open it tho? That's what it is doing to me.
I get a status 6 error trying to flash.
Sent from my GS3...
wanam said:
You can follow this HowTo, it just set the "View by" to "All calls".]
Click to expand...
Click to collapse
In your thread, you said your patch works on stock deodexed roms. Do you have a patch that works on stock odexed roms?
...Or, will that patch work anyway
kingwp1 said:
In your thread, you said your patch works on stock deodexed roms. Do you have a patch that works on stock odexed roms?
...Or, will that patch work anyway
Click to expand...
Click to collapse
It has the odex file also. It will work on stock odexed
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Optimizer said:
Or just clicking menu and view options and choose only calls....
Click to expand...
Click to collapse
Bajanman said:
Tried that and it worked perfect. No need to install the zip. Imo
Click to expand...
Click to collapse
natefish said:
Well, someone slap the Easy button! Thank you. That saved a lot of trouble.
Click to expand...
Click to collapse
Above method only removes it from view (and only that one time on s3) but it doesn't delete the actual log. This mod prevents sms log from showing up in the first place.
sentry07 said:
Above method only removes it from view (and only that one time on s3) but it doesn't delete the actual log. This mod prevents sms log from showing up in the first place.
Click to expand...
Click to collapse
i flashed this and texts still show in my log
Nvm, I got it. Thanks for this
mikeyinid said:
Doesn't it show all next time you open it tho? That's what it is doing to me.
I get a status 6 error trying to flash.
Sent from my GS3...
Click to expand...
Click to collapse
Same with me, how did you get around the error?
My Sprint version doesn't allow for messages in logs, tho I wish it did
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SPH-L710 using Tapatalk 2
mikeyinid said:
i flashed this and texts still show in my log
Nvm, I got it. Thanks for this
Click to expand...
Click to collapse
Just to clarify, this mod only prevents new entries in the log. You need to manually delete your old call log. You can test this by sending yourself a text message - it will not show up in your log.
ShadeXVII said:
Same with me, how did you get around the error?
Click to expand...
Click to collapse
As far as I know error 6 relates to something missing in the script and I double-checked again - the script is fine.
Which carrier are you with? Are you rooted? Do you have the latest update (UCALG1)? Which version of CWM are you using? Does it start flashing and then stop?
sentry07 said:
As far as I know error 6 relates to something missing in the script and I double-checked again - the script is fine.
Which carrier are you with? Are you rooted? Do you have the latest update (UCALG1)? Which version of CWM are you using? Does it start flashing and then stop?
Click to expand...
Click to collapse
I also get error 6 when flashing. I just used root explorer to paste the apk in /system/app
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
mikeyinid said:
I also get error 6 when flashing. I just used root explorer to paste the apk in /system/app
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
Well I just tested it on a different phone and got the same error but I don't have time to figure this out now so I'll just post the apk and odex files which you'll need to push to system/apps and replace the existing files. You can do this with root explorer - you'll have to mount with rw permission.
EDIT: Never mind, figured it out - It works now (script had one cr too many). I've updated the mod in the first post.

[ROM][12/15] Stock Rooted LS980ZV8 [ODEX/DEODEX]

Rooted.
Busybox.
Zipaligned.
Odex/Deodex.
Stock LS980ZV8.
Download ROM:
StockZV8-Odex
MD5: b0bf8cf98ee4368072c58138c2537297
Size: 1.7 GB
StockZV8-Deodex
MD5: 0befeebe69b3727f7a29cc4e1f4b628f
Size: 1.7 GB
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
1st...sweet...will ioroot11 work?
thanks:highfive:
from what Ive read it does.
if youre already rooted before this update youll still be rooted.
Thanks a lot! But I need to ask a dumb question.. What is the difference between this and an odex ROM you will make?
Sent from LG-LS980
I really am sorry to ask and maybe I should ask in General Questions, but is this update a new rom or an update to stock? Why do I need it
bearsblack said:
Thanks a lot! But I need to ask a dumb question.. What is the difference between this and an odex ROM you will make?
Sent from LG-LS980
Click to expand...
Click to collapse
alldayer said:
I really am sorry to ask and maybe I should ask in General Questions, but is this update a new rom or an update to stock? Why do I need it
Click to expand...
Click to collapse
this is a somewhat minor (101 mb, not really that minor) update lg and sprint just pushed.
you want this because it fixes some things lg/sprint may have come across that were either broken or just messed up in the previous release.
the difference between this and the odex rom im am going to upload is this is a flashable update, as opposed to a full stock rom with the updates included.
some people like to be on just a stock odexed rom and it is also for devs to have a base with the lastest updates to build on.
i am going to deodex the rom as well for the devs here.
I'm rooted, with some apps frozen. I will go back and unfreeze them. Once I do this, what else would I need to do?
Sent from my LG-LS980 using xda app-developers app
I'm on Dynamite ROM is it ok to flash this on top.
Sent from my Nexus 10 using Tapatalk 4
DopePedaler said:
I'm rooted, with some apps frozen. I will go back and unfreeze them. Once I do this, what else would I need to do?
Sent from my LG-LS980 using xda app-developers app
Click to expand...
Click to collapse
i really dont think you need to even unfreeze them.
as long as all of the apps are present and not tampered with you should be good.
cdsbj6508 said:
I'm on Dynamite ROM is it ok to flash this on top.
Sent from my Nexus 10 using Tapatalk 4
Click to expand...
Click to collapse
no, he removed and changed apps.
you can try, but im almost certain flashing it will fail.
Thank you! Makes perfect sense! I'm on stock rooted and will update
youdug said:
i really dont think you need to even unfreeze them.
as long as all of the apps are present and not tampered with you should be good.
Click to expand...
Click to collapse
Yeah, no need to defrost. Anyway, I just flashed and it fails. I'm running stock rooted, with some xposed mods, I wiped caches, fixed permissions, redownloaded, etc. Hmmmm
Sent from my LG-LS980 using Tapatalk 2
Jocelyn said:
Yeah, no need to defrost. Anyway, I just flashed and it fails. I'm running stock rooted, with some xposed mods, I wiped caches, fixed permissions, redownloaded, etc. Hmmmm
Sent from my LG-LS980 using Tapatalk 2
Click to expand...
Click to collapse
what does it say when it fails?
youdug said:
what does it say when it fails?
Click to expand...
Click to collapse
assert failed: apply_patch_check "system/appCameraApp.apk"
Hmmm I probably need to restore my camera app instead of Xdabbeb's then reflash, thanks youdug
Jocelyn said:
assert failed: apply_patch_check "system/appCameraApp.apk"
Hmmm I probably need to restore my camera app instead of Xdabbeb's then reflash, thanks youdug
Click to expand...
Click to collapse
"Sorry, you are limited to 8 thanks per day."
the xposed stuff is going to make it fail too.
i can almost guarantee it.
any changes AT ALL is going to make it fail.
i forgot i changed a line in the build prop and it failed just now.
i went back and restored the original and it flashed without a problem.
ill see if i can remove the file checks right now.
Mine failed on chrome with browser.apk
Sent from my LG-LS980 using Tapatalk
youdug said:
"Sorry, you are limited to 8 thanks per day."
the xposed stuff is going to make it fail too.
i can almost guarantee it.
any changes AT ALL is going to make it fail.
i forgot i changed a line in the build prop and it failed just now.
i went back and restored the original and it flashed without a problem.
ill see if i can remove the file checks right now.
Click to expand...
Click to collapse
lol, yeah it's not a big deal. I'll nandroid back to before I applied mods, update and reapply. It'll probably take me 5 minutes.
Thanks for making this
no problem
i am going to zipalign the stock rom and then flash it.
if everything is good ill just upload that tonight and save some hassle.
youdug said:
no problem
i am going to zipalign the stock rom and then flash it.
if everything is good ill just upload that tonight and save some hassle.
Click to expand...
Click to collapse
I updated ZV8 with no problem. Flashed in TWRP after erasing dalvik and cache, fix permissions. After reboot ,lost root. Using SuperSu. Went ahead and ioroot again, gained root and then removed superuser.
hmm, strange.
you shouldnt have lost root.
theres nothing that would have removed it.
the update doesnt wipe any partitions.
it removes a couple system apps that come preinstalled but it doesnt remove anything else, and the ones it removes get reinstalled.
either way, i am about to boot back into ubuntu and zipalign this and then upload a stock odex rom if everything is good.
youdug said:
hmm, strange.
you shouldnt have lost root.
theres nothing that would have removed it.
the update doesnt wipe any partitions.
it removes a couple system apps that come preinstalled but it doesnt remove anything else, and the ones it removes get reinstalled.
either way, i am about to boot back into ubuntu and zipalign this and then upload a stock odex rom if everything is good.
Click to expand...
Click to collapse
My SuperSU was still in the tray, just when I clicked on it, I got a "binary removed and SuperSU can't install it. This is no good" LOL I did get that message. No worries, easily fixed. Going to play with CM 10.2 now, and then Nandroid back to stock root after that. I need wifi tether working and currently can't be stock rooted and get wifi tether working. I think I will lose GPS though on CM 10.2. Was going to try and see what I get. I know its just a matter of time and someone smarter than me will figure it out.

Categories

Resources