Replacement Screen help - Galaxy S III Accessories

Hey guys,
So, I did the unthinkable and dropped my phone today. The screen cracked, but it still works. So I don't think I need a full digitizer, and I see the screens going on ebay for 20 bucks, but they're for the international model. Would just the glass part of the screen fit my phone?

sixout said:
Hey guys,
So, I did the unthinkable and dropped my phone today. The screen cracked, but it still works. So I don't think I need a full digitizer, and I see the screens going on ebay for 20 bucks, but they're for the international model. Would just the glass part of the screen fit my phone?
Click to expand...
Click to collapse
Price about USD200 for the whole screen, you can't buy just the glass. Search youtube for instructions.

Damn. I was hoping that wouldn't be the answer.

sixout said:
Damn. I was hoping that wouldn't be the answer.
Click to expand...
Click to collapse
sometime once in a life time you gonna have to accept the fact:fingers-crossed:
also if you decide to do the replacement, it's best to get a replacement with the metal base, cost alittle more but save the trouble of complicated installation, time and a cleaner finish.

I actually contacted samsung.
The replacement digitizer is over 200 everywhere I look, samsung is going to repair it completely for 178. Still sucks, but it's better I suppose.

Insure it and pay 100 for a new phone
Sent from Vzw Galaxy SIII running Cleanrom 1.3

Related

Galaxy S3 Screen Replacement

Hello guys
I recently dropped my Galaxy S3 and cracked the screen. The actual screen is looking fine and I can still touch the crack and it responds fine what would I need to replace the screen.
http://www.amazon.com/Original-Genu...=8-14&keywords=i9300+digitizer&tag=gs3root-20
this is what some people say you need, along with a anywhere from 15-35 min of time depending on how thorough you wanna be with the glue
where as there are items like this on ebay http://www.ebay.com/itm/blue-Digiti...768?pt=LH_DefaultDomain_0&hash=item27c9354010
I seen at radio shack they can fix crack screens idk how long I just seen they have a f lyer out side saying they fix them just go to your local radio shack see whats up if not they will charge u like 200"to fix it 4 u
Sent from my SGH-T999 using xda premium
The only way I was able to fix mine was to buy an lcd,digitizer and screen in one. Theyre all bonded together,you cant replace just the glass. Cost me 89.00 on ebay for part only
Screen replacement
sc2dave said:
The only way I was able to fix mine was to buy an lcd,digitizer and screen in one. Theyre all bonded together,you cant replace just the glass. Cost me 89.00 on ebay for part only
Click to expand...
Click to collapse
Yeah the two parts are fused together. I read some stuff about cheap/fake gorrila glass units on ebay so I sent mine straight to Samsung for repair. Cost 180$ including shipping to and from. Even the "oem" screen digitizers cost 200–300 on Amazon or cell repair sites.
www.ifixit.com/Guide/Samsung-Galaxy-S3-Disassembly-Assembly/9413/1
toukhang said:
Yeah the two parts are fused together. I read some stuff about cheap/fake gorrila glass units on ebay so I sent mine straight to Samsung for repair. Cost 180$ including shipping to and from. Even the "oem" screen digitizers cost 200–300 on Amazon or cell repair sites.
Click to expand...
Click to collapse
If you are close by, i can repair it for you. It's pretty easy. Just gotta buy the 88.00 part.
toukhang said:
Yeah the two parts are fused together. I read some stuff about cheap/fake gorrila glass units on ebay so I sent mine straight to Samsung for repair. Cost 180$ including shipping to and from. Even the "oem" screen digitizers cost 200–300 on Amazon or cell repair sites.
Click to expand...
Click to collapse
Did you get yours back yet? I sent my phone in a few days ago. I just wanted to see how they did on the replacement.
Thanks,
samwilki said:
Hello guys
I recently dropped my Galaxy S3 and cracked the screen. The actual screen is looking fine and I can still touch the crack and it responds fine what would I need to replace the screen.
Click to expand...
Click to collapse
Sorry to hear that. You can get part and fix it yourself. Save some buck or take it to bestbuy or radioshack.
I am also sending mine in for fixing. What I would like to know is if they will replace the metal frame that goes around the phone mine has a big dent from the fall I think its called the bezel? Anyone know if this gets replaced when samsaung fixes the screen.
Sent from my SGH-T999 using xda app-developers app
sc2dave said:
If you are close by, i can repair it for you. It's pretty easy. Just gotta buy the 88.00 part.
Click to expand...
Click to collapse
Which item is that exactly?? I've done iphone screens, mytouch screens is this one similar?
I send my in before and all they do is send u a refurnish
Sent from my SGH-T999 using xda app-developers app
samwilki said:
Hello guys
I recently dropped my Galaxy S3 and cracked the screen. The actual screen is looking fine and I can still touch the crack and it responds fine what would I need to replace the screen.
Click to expand...
Click to collapse
Dont pay anymore than $25 for a digitizer.
eggnoodle said:
Did you get yours back yet? I sent my phone in a few days ago. I just wanted to see how they did on the replacement.
Thanks,
Click to expand...
Click to collapse
Yeah it took a good week. It looks and feels like brand new. They even replaced the button at the bottom. And about the comment of just getting good a refurbished one in return... Check your serial afterward. I got my original phone back. And to folks who offer to fix these my main concern is genuine oem parts. Some ppl have said after they fix there's the phone simply doesn't feel like it's oem state.
Dose anyone know if I can replace only the digitizer?? All the tutorials I see online is replacement of LCD and Digitizer..
Digitizers are $25 on ebay Digitizer and LCDs are over $200...
After further investigation I found out why you can't replace just the glass..
http://www.youtube.com/watch?v=es8gezSdKv4&feature=youtu.be
Samsung Galaxy S3 Screen Repair
Acutally there are several tutorials on just replacing the screen. It is a bit tedious and will require patience but is very doable. From all I see, the outer metal/chrome/etc frame is part of the digitizer is and will not be part of the screen only replacement. Screen assemblies alone are around $30 on Ebay
This might help: How to replace JUST the glass on a Galaxy SIII
sc2dave said:
The only way I was able to fix mine was to buy an lcd,digitizer and screen in one. Theyre all bonded together,you cant replace just the glass. Cost me 89.00 on ebay for part only
Click to expand...
Click to collapse
link? I need one now.
the price for the replace screen is so expensive
YOU CANNOT JUST REPLACE THE GLASS OR JUST REPLACE THE LCD! THEY ARE FUSED TOGETHER!
IN ORDER TO UNFUSE THEM YOU NEED AN OVEN DESIGNED JUST FOR THAT DO NOT ATTEMPT TO DO IT ON YOUR OWN!
Buying just the glass is a scam and will not work!!!!!!!! YOU MUST BUY THE GLASS WITH THE LCD FUSED TO IT ALREADY!

Samsung galaxy tab pro 8.4 wifi screen broken

Hi guys my son dropped my tablet and all the screen are shattered. Is there any way where we can find a replacement screen? How easy to replaced the screen? Thanks in advance.
Sent from my Nexus 6 using Tapatalk
caloyzki said:
Hi guys my son dropped my tablet and all the screen are shattered. Is there any way where we can find a replacement screen? How easy to replaced the screen? Thanks in advance.
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
Not good, I'm pretty sure the tablet has a clear optic adhesive under the digitizer glass and lcd so if you remove the glass the glue will be remove too and you will be left with a display that looks like it has a big air bubble under the screen...(someone correct me if I'm wrong)
see the thread here (for the 12.2 model but I'm pretty sure it's the same for the 8.4)
http://forum.xda-developers.com/gal...p/replace-cracked-glass-tab-pro-12-2-t3251203
so you will most likely have to replace the digitizer glass+ lcd in one unit
for the full assembly you might be able to find these on ebay or aliexpress (china- might be official or knockoffs)
http://www.aliexpress.com/wholesale?catId=0&initiative_id=SB_20160117213008&SearchText=sm-t320+lcd
look for ones that include the LCD + Digitizer as one (usually around $100-$170) - also make sure the store has a good return policy and good feedback (maybe even good feedback for the item aswell), it is very hard to return to china so it's best to make sure before purchasing.
http://www.samsungparts.com/Products/Parts_and_Accessories/SMT320/Default.aspx
this place sells all the parts but you might need to email them to get specific part numbers - and well it's probably expensive
last but not least send it to Samsung and have them fix it, they will usually just swap out the lcd + digitizer with a new one.
otyg said:
Not good, I'm pretty sure the tablet has a clear optic adhesive under the digitizer glass and lcd so if you remove the glass the glue will be remove too and you will be left with a display that looks like it has a big air bubble under the screen...(someone correct me if I'm wrong)
see the thread here (for the 12.2 model but I'm pretty sure it's the same for the 8.4)
http://forum.xda-developers.com/gal...p/replace-cracked-glass-tab-pro-12-2-t3251203
so you will most likely have to replace the digitizer glass+ lcd in one unit
for the full assembly you might be able to find these on ebay or aliexpress (china- might be official or knockoffs)
http://www.aliexpress.com/wholesale?catId=0&initiative_id=SB_20160117213008&SearchText=sm-t320+lcd
look for ones that include the LCD + Digitizer as one (usually around $100-$170) - also make sure the store has a good return policy and good feedback (maybe even good feedback for the item aswell), it is very hard to return to china so it's best to make sure before purchasing.
http://www.samsungparts.com/Products/Parts_and_Accessories/SMT320/Default.aspx
this place sells all the parts but you might need to email them to get specific part numbers - and well it's probably expensive
last but not least send it to Samsung and have them fix it, they will usually just swap out the lcd + digitizer with a new one.
Click to expand...
Click to collapse
Thank you. I guess its too expensive to make a screen replacement for the tab. Not really worth it to fix it for $200. Rather than buy a new tab. Hopefully i can find somwhere else where they charged not that much. Thanks again.
Sent from my Nexus 6 using Tapatalk
caloyzki said:
Thank you. I guess its too expensive to make a screen replacement for the tab. Not really worth it to fix it for $200. Rather than buy a new tab. Hopefully i can find somwhere else where they charged not that much. Thanks again.
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
I would check around with local repair shops (ones that specialize in tablet and phone repairs- since they should be very familiar with the oca film), maybe if you can supply them with a replacement digitizer, they can do the rest of the repair for cheaper.
you can check youtube for the oca film process (type oca film or LOCA screen) and a bunch of videos will come up.
otyg said:
Not good, I'm pretty sure the tablet has a clear optic adhesive under the digitizer glass and lcd so if you remove the glass the glue will be remove too and you will be left with a display that looks like it has a big air bubble under the screen...(someone correct me if I'm wrong)
see the thread here (for the 12.2 model but I'm pretty sure it's the same for the 8.4)
http://forum.xda-developers.com/gal...p/replace-cracked-glass-tab-pro-12-2-t3251203
so you will most likely have to replace the digitizer glass+ lcd in one unit
for the full assembly you might be able to find these on ebay or aliexpress (china- might be official or knockoffs)
http://www.aliexpress.com/wholesale?catId=0&initiative_id=SB_20160117213008&SearchText=sm-t320+lcd
look for ones that include the LCD + Digitizer as one (usually around $100-$170) - also make sure the store has a good return policy and good feedback (maybe even good feedback for the item aswell), it is very hard to return center, thatna so it's best to make sure before purchasing.
http://www.samsungparts.com/Products/Parts_and_Accessories/SMT320/Default.aspx
this place sells all the parts but you might need to email them to get specific part numbers - and well it's probably expensive
last but not least send it to Samsung and have them fix it, they will usually just swap out the lcd + digitizer with a new one.
Click to expand...
Click to collapse
It's crazy, this tablet costs more now used than what I bought it new for.
I too have a broken digitizer... And my screen has been going bad.. So unless you live near a samsung service center, that option is out. I keep seeing people suggest the LCD + digitizer replacement, but there is not one guide on how to actually do it.
The only thing I could find was some German guy on YouTube for a digitizer (not a whole LCD) replacement. How do you go about doing the replacement? The generic answer has been look at iFixIt or YouTube, but there isn't anything for this model...
TyIsOwned said:
It's crazy, this tablet costs more now used than what I bought it new for.
I too have a broken digitizer... And my screen has been going bad.. So unless you live near a samsung service center, that option is out. I keep seeing people suggest the LCD + digitizer replacement, but there is not one guide on how to actually do it.
The only thing I could find was some German guy on YouTube for a digitizer (not a whole LCD) replacement. How do you go about doing the replacement? The generic answer has been look at iFixIt or YouTube, but there isn't anything for this model...
Click to expand...
Click to collapse
I broke my digitizer the same week I got mine. I found only one place online to buy one. Google it, it's from China. It was about $160.00ish.. I followed the tutorial for galaxy tab s on YouTube. It was very easy.

Screen broken:(

Hello
Where may I a replacing screen for my Le Max 2? It has just fallen on the floor and is broken even though the touch screen is still working
thanks
Hope this helps. Check the store feedback before buying.
http://www.aliexpress.com/wholesale...030452&SearchText=le+max+2+replacement+screen
Good to know it can be done and there are spare parts around.
Always thought it was fatal with these newer "design over everything" phones.
neo299 said:
Hope think is helps. Check the store feedback before buying.
http://www.aliexpress.com/wholesale...030452&SearchText=le+max+2+replacement+screen
Click to expand...
Click to collapse
Thx for your reply. Can you say which lcd screen is made by LeTV or is there an LCD screen which is made by LeTV? Thx
I don't know. Perhaps someone else on the forum has that information. I think they sell original screens but it's best you contact the sellers directly before ordering.
lcarrere said:
Hello
Where may I a replacing screen for my Le Max 2? It has just fallen on the floor and is broken even though the touch screen is still working
thanks
Click to expand...
Click to collapse
Try Le TV service centre ????
Hi!
Any update since October? I`m facing the same issue. I have googled a bit and found some complaints related to LCDs from Aliexpress claiming that they are no so bright and blurry, sometimes with white spots.
I have also find only a glass replacement https://www.aliexpress.com/item/5-7...lgo_pvid=aec8908f-0e28-4202-a650-ab20f3981970
of a glass with digitizer: http://www.ebay.com/itm/for-LeEco-L...966586?hash=item58e23ffdba:g:z4wAAOSw-kdXxPkl
But... also a lot people claims that the LCD is almost inseparable from glass... Do anyone have an experience with only glass replacement?
I found a local service that claims to be able to do that.. but I do not know whether to trust them not destroy the LCD. The said, that they do not have an experience with Le Max 2 but with other phones.
Thanks
xjack03 said:
Hi!
Any update since October? I`m facing the same issue. I have googled a bit and found some complaints related to LCDs from Aliexpress claiming that they are no so bright and blurry, sometimes with white spots.
I have also find only a glass replacement https://www.aliexpress.com/item/5-7...lgo_pvid=aec8908f-0e28-4202-a650-ab20f3981970
of a glass with digitizer: http://www.ebay.com/itm/for-LeEco-L...966586?hash=item58e23ffdba:g:z4wAAOSw-kdXxPkl
But... also a lot people claims that the LCD is almost inseparable from glass... Do anyone have an experience with only glass replacement?
I found a local service that claims to be able to do that.. but I do not know whether to trust them not destroy the LCD. The said, that they do not have an experience with Le Max 2 but with other phones.
Thanks
Click to expand...
Click to collapse
If you can get the fast delivery, then you can give it a go. Although it's a risky operation,it might be alright in the end. The service should have some experience if they say that for other brands/phones they have succeeded. It might be ok, but always keep in mind that something might go wrong. And it's not worth waiting 2 months for the glass and another 2 for the display.
Edit: you can google the process and you will see how it's done for other phones. They need to have special devices.
valy_cta said:
If you can get the fast delivery, then you can give it a go. Although it's a risky operation,it might be alright in the end. The service should have some experience if they say that for other brands/phones they have succeeded. It might be ok, but always keep in mind that something might go wrong. And it's not worth waiting 2 months for the glass and another 2 for the display.
Edit: you can google the process and you will see how it's done for other phones. They need to have special devices.
Click to expand...
Click to collapse
Thanks for such a fast reply. I already did https://www.youtube.com/watch?v=cRqSyZk1SOU It seems to be very tricky. I have relatively fast delivery about 2-3 weeks so I`ll give it a try with only a glass an digitizer http://www.ebay.com/itm/for-LeEco-L...966586?hash=item58e23ffdba:g:z4wAAOSw-kdXxPkl.
I`ll write a review after the whole process is done for future reference
Very difficult. They make it look easy on youtube. I attempted a glass only repair on a nexus 6. You have to have correct amount of heat, and the LCD is very fragile. Too much heat will damage the display, but you need enough heat to soften the loca glue to be able to separate the glass from the lcd.. I even had a scientific dry bath at my disposal to get the right temp.. Not worth a home repair attempt IMO.
Cost of the le max 2 is just the reason I bought this phone (vs a $600+ device) and put on tempered glass from Ali express for less than $2. Will you consider replacing your phone for $200?
My wife broke her tempered glass protector twice on the max 2. Easy fix, just replaced the tempered glass cover. I'm just saying I learned the hard way, on a more expensive Nexus 6. I wasn't aware of tempered glass protectors then. Even after destroying my lcd (by trying a glass-only repair) and ending up buying the lcd+glass assembly, I still didn't get the phone's frame tight with the display assembly to make it acceptable.
I tried to repair lcd once for another phone. It took me 1h just to disassemble the phone, and half an hour more to try to carefully separate lcd from digitizer. I failed and then there was no point spending another hour puting the phone back together and had to throw all those tiny parts to the garbage. Think about this before you try.
Home repairs of such kind are a no go. This is why I encourage him to go to the repair shop where they do that kind of repairs to the screen. They do have a special heated plate with temperature adjustment, a vacuum device that eliminates any bubbles between the lcd and glass, etc. Also do note that not all the repair shops are doing this. Most of them are collecting phones for the specialized shops and charge an extra fee.
In conclusion, this kind of repair is not for everybody, and it would be best done in a specialized repair shop. For reference, check the following video:
I know it's written in romanian and for an Allview, but I guess that most of the things are understandable to get the idea of how complicated the whole process is for any home attempt.
So, after a month in repair center I have my phone back. The screen is an original one with digitizer changed. Between digitizer and screen there are some bubbles, buttons are switched, like back is on a left instead of right and the bugged issue... They are very undeterministic and do not always work and sometimes they work without even touching so... Apps are switching and so on... I needed to disable them and use gestures instead.
The repair was about 40USD and digitizer 15 USD... It is hard to say whether it was worth it or exchange the complete screen.
Hello, please help me.
I live in MAYOTTE, I have to order a new screen. I do not find any vendor who delivers in my country.
Mayotte : https://goo.gl/maps/m62kwSK7yC92
raphimor said:
Hello, please help me.
I live in MAYOTTE, I have to order a new screen. I do not find any vendor who delivers in my country.
Mayotte : https://goo.gl/maps/m62kwSK7yC92
Click to expand...
Click to collapse
I'm the owner of the repair shop. I can take care of this phone, but I'm living on the other end of the world. Is there any career that can deliver something to you from Europe? I would like to make a video tutorial how to repair this phone, but mine one is working so there is no sense in repairing working phone...
CrazyPonkeyMen said:
I'm the owner of the repair shop. I can take care of this phone, but I'm living on the other end of the world. Is there any career that can deliver something to you from Europe? I would like to make a video tutorial how to repair this phone, but mine one is working so there is no sense in repairing working phone...
Click to expand...
Click to collapse
Yes of course. I can receive a parcel from europe thanks to CHRONOPOST
raphimor said:
Yes of course. I can receive a parcel from europe thanks to CHRONOPOST
Click to expand...
Click to collapse
I can personally recommend this vendor. https://www.aliexpress.com/item/For...32820735893.html?spm=a2g0s.9042311.0.0.xEXMor
Replacing the screen + digitiser on this model is pretty easy provided you have access to a hot air gun. Took me about 15 minutes and I'm in NO WAY a pro. For the price of a new screen I definitely wouldn't attempt a digitizer-only repair.
mikeysteele said:
I can personally recommend this vendor. https://www.aliexpress.com/item/For...32820735893.html?spm=a2g0s.9042311.0.0.xEXMor
Replacing the screen + digitiser on this model is pretty easy provided you have access to a hot air gun. Took me about 15 minutes and I'm in NO WAY a pro. For the price of a new screen I definitely wouldn't attempt a digitizer-only repair.
Click to expand...
Click to collapse
Wow.... That's cheap enough to order one and have it just in case.....
Thanks for the link
I have brought this one.
https://www.aliexpress.com/item/Gra...32799506808.html?spm=a2g0s.9042311.0.0.HsyGUO
And I can say, It's same as the original one in every detail(Even production date so close). Replacement is very easy with tool that came with screen.
BTW, You have to buy glue(B6000,E7000,T8000 or whatver) for fix it in place.

Lenovo p2 replacement screen

Hi I'm wondering where I could source a replacement screen for this device as none of my local phone repair shops seem to be able to source one
http://s.aliexpress.com/BRzQZBBV
Here you go and good luck with the replacement
P.S.
If you are looking for the black model, follow this link: Replacement Display
Bump
Has anybody got a reliable source? There seems to be a global shortage of these bloody screens and besides the official Lenovo replacement costing 90% of the price of the phone, there are no other options available anywhere. Nothing on AliExpress, BangGood, Alibaba, eBay and anywhere else in my coutry.
Phantoml337 said:
Bump
Has anybody got a reliable source? There seems to be a global shortage of these bloody screens and besides the official Lenovo replacement costing 90% of the price of the phone, there are no other options available anywhere. Nothing on AliExpress, BangGood, Alibaba, eBay and anywhere else in my coutry.
Click to expand...
Click to collapse
+1. Cracked my screen last week, still fully functional but crack pattern is expanding and I don't trust it to be usable for a long time to come.
Been searching for replacement screen assembly but found nothing. Going to try contacting Lenovo technical support in my country now...
Lenovo tech support pointed me to a repair firm.
Repair firm asks to send the phone in, after which they provide a quote. If I don't agree to get it fixed, I have to pay a few tens for problem analysis. Like wtf, it's a cracked screen, you change it, it's a standard job with a standard cost that you can give me before I send it in!
Called another repair firm. They can't get the screen.
Apparently these screens are just not available.
They are on Aliexpress right HERE.
Expensive as hell though, considering you can get a new P2 for 180 euro's or a new screen for 160.
The Dutchman said:
They are on Aliexpress right HERE.
Expensive as hell though, considering you can get a new P2 for 180 euro's or a new screen for 160.
Click to expand...
Click to collapse
Thanks, that one is gone again though. And yeah at that price it's ridiculous.
But I've just found this: https://nl.aliexpress.com/item/For-...lgo_pvid=b8eb5b04-c098-4a2b-a5ea-f9e34e6da00f
$113, which amounts to €94, with free shipping. This seems acceptable.
---------- Post added at 11:35 AM ---------- Previous post was at 11:27 AM ----------
Well, the seller had just one of them so I bought it. Now let's hope my cracked screen stays functional for the time it takes to get the new screen here...
Hi, I also have problem with broken lcd in my lenovo where I could buy lcd replacement for this device? I cant find it anywhere!
Please help
pawelisek said:
Hi, I also have problem with broken lcd in my lenovo where I could buy lcd replacement for this device? I cant find it anywhere!
Please help
Click to expand...
Click to collapse
Seems like nowhere.
The order I made on aliexpress was subsequently cancelled because of it being "out of stock".
Options at this point seem limited to:
1. get it fixed for stupid money (not even sure whether any fixing service can get their hands on it)
2. try to locate a damaged second-hand phone with working screen you can buy for less
3. if your LCD and touch input still work fine like mine, just put up with it and wait for some months until people start upgrading and the asking prices for second-hand models start to drop
4. meanwhile, search on aliexpress or ebay every single day and hope a screen gets available for an acceptable price
I dropped my phone yesterday and the screen shattered from end to the other but the phone is working fine. I have just ordered the replacement front glass off of ebay for £19.99 from HK but seems a bit too cheap to me but worth a gamble at that price. Only problem is I have no idea how to take the phone apart and separate the glass from the digitizer! Are there instructions about I could follow or is my best bet taking it to a mobile phone repair shop to get it done?
I can post the ebay number if anyone is interested.
Sp0oner said:
I dropped my phone yesterday and the screen shattered from end to the other but the phone is working fine. I have just ordered the replacement front glass off of ebay for £19.99 from HK but seems a bit too cheap to me but worth a gamble at that price. Only problem is I have no idea how to take the phone apart and separate the glass from the digitizer! Are there instructions about I could follow or is my best bet taking it to a mobile phone repair shop to get it done?
I can post the ebay number if anyone is interested.
Click to expand...
Click to collapse
I have a crack on my screen. I ordered a replacement glass on AliExpress which costs just ₹1450.
Its just the glass and not touch digitiser which costs₹10500.
senseijtitus said:
I have a crack on my screen. I ordered a replacement glass on AliExpress which costs just ₹1450.
Its just the glass and not touch digitiser which costs₹10500.
Click to expand...
Click to collapse
Have you got instructions on how to take the phone apart and separate the glass from the digitizer? The last part is what i'm worried is going to be extremely difficult?!
Sp0oner said:
Have you got instructions on how to take the phone apart and separate the glass from the digitizer? The last part is what i'm worried is going to be extremely difficult?!
Click to expand...
Click to collapse
You tube. Check the entire display removal tutorial. Then check glass replacement tutorial for galaxy s8.
After taking off display, you have to chip off the glass from display after heating it with a hot air gun. Then remove the residual UV glue from panel. Then after making sure panel is clean, apply new UV glue on center, then place glass on top and then press from center gently to spread the glue evenly and that's it.
senseijtitus said:
You tube. Check the entire display removal tutorial. Then check glass replacement tutorial for galaxy s8.
After taking off display, you have to chip off the glass from display after heating it with a hot air gun. Then remove the residual UV glue from panel. Then after making sure panel is clean, apply new UV glue on center, then place glass on top and then press from center gently to spread the glue evenly and that's it.
Click to expand...
Click to collapse
Thank you but i'm never going to manage to do that myself, I don't own a hot air gun for a start. Looks like i've wasted £20 plus the postage as I doubt i'll find a mobile phone repair shop to do it for me, i'd happily pay someone to do it if I could find someone!

Replacement Parts

If and when anyone replace any parts on this phone, like a screen, digitizer, frame or just anything, please share your experience here, thanks!
As I understand it, the original water resistance won't be relevant after tear-apart. Some impervious will be lost. The disassembly is more involved than most, in the past. I, myself, may be looking at getting a better phone via trade-in. Gone are the days, for the most part, of servicing the phone for a battery, to keep things going. I'll still monitor the posts about the phone, but things have gotten to where 'root' isn't much of a benefit anymore.
Sent from my LM-V405 using Tapatalk
I'm in the process of getting a new screen, a frame and a battery. Right now the cost for the screen, digitizer and frame is around $175. Batter $7. There's pretty good instructions out there, so shouldn't be a problem.
Didn't you start this thread to share info when sourcing replacement parts?
Where are you sourcing the screen, frame and battery you mention in your post?
Here you go:
WhyKRUM said:
Didn't you start this thread to share info when sourcing replacement parts?
Where are you sourcing the screen, frame and battery you mention in your post?
Click to expand...
Click to collapse
This is what I'm looking at right now. Been looking around a lot and those two seams OK and I'm going to wait for the price (screen) to drop a bit more. It was $150 a month ago.
https://m.aliexpress.com/item/40002...d=8662amp-LQ68B83tsKefTTvVj7Y4NA1575388976474
https://m.aliexpress.com/item/40005...er_id=e78e028e9a44471092750f6d189bf509&is_c=Y
https://www.mengtor.com/brand/LG/For-LG-V-Series/For-LG-V40-ThinQ/1878.html
https://www.mengtor.com/LG/For-LG-G...0-ThinQ-V405(BL-T37)/1842,1878,428/27979.html
Meanwhile...
I will try this screen protector:
https://m.aliexpress.com/item/32952...er_id=e78e028e9a44471092750f6d189bf509&is_c=Y
It's similar to Dome Whitestone, but a fragment of the price. About $4 compared to $40...
nyttliv7 said:
I will try this screen protector:
https://m.aliexpress.com/item/32952...er_id=e78e028e9a44471092750f6d189bf509&is_c=Y
It's similar to Dome Whitestone, but a fragment of the price. About $4 compared to $40...
Click to expand...
Click to collapse
Beware 'cheap' prices! Potential bad fit/poor adhesion. If they have a good return policy, go for it, otherwise, next company.
Sent from my LM-V405 using Tapatalk
Thanks...
Einsteindks said:
Beware 'cheap' prices! Potential bad fit/poor adhesion. If they have a good return policy, go for it, otherwise, next company.
Sent from my LM-V405 using Tapatalk
Click to expand...
Click to collapse
I'm aware! So cheap it's worth trying and aliexpress have a 30 day return policy if I'm not mistaken...
I'll keep you posted...
broken glass v40
Hi guys, how do i know if i have to replace a glass or the full lcd + digitalizer? my daughter dropped my phone. It works perfectly but the glass is broken and i dont want to spend 150USD.
nicolasgmatonti said:
Hi guys, how do i know if i have to replace a glass or the full lcd + digitalizer? my daughter dropped my phone. It works perfectly but the glass is broken and i dont want to spend 150USD.
Click to expand...
Click to collapse
If the image under the glass is broken and the touch panel is NOT then you only need an LCD.
If the top touch panel or (glass top) is cracked or broken but the image under it is fine then you only need the Touch Panel (relatively cheap).
If the top touch panel is broken and the lcd image is either black liquid or cracked you need a complete screen.
To be honest it's probably easier to get the combined parts to avoid having to separate LCD from digitizer and risk a failure. Since the digitizer is fused to the LCD you would need some special tools to remove the digitizer to ensure success. Separating the assembly with heatguns, etc. isn't that easy.
My advice: invest in replacing the complete assembly to ensure success.
Positively surprised
The Akcoo "doomglass" fits perfectly and I struggle really hard to even see my cracked screen underneath. Remember, this was $3.50 on Aliexpress! Will still go for a new screen later though. I'll keep you posted regarding the quality of the screen protector...
nyttliv7 said:
The Akcoo "doomglass" fits perfectly and I struggle really hard to even see my cracked screen underneath. Remember, this was $3.50 on Aliexpress! Will still go for a new screen later though. I'll keep you posted regarding the quality of the screen protector...
Click to expand...
Click to collapse
Nice! These protectors with the UV glue are the only ones that work good on curved screens, had one on my V30, but now need it for my V40. The source I was going to use is currently away for Chinese New Years.. May I ask how long it took to ship to you?
Thanks
Shipping
Talysdaddy said:
Nice! These protectors with the UV glue are the only ones that work good on curved screens, had one on my V30, but now need it for my V40. The source I was going to use is currently away for Chinese New Years.. May I ask how long it took to ship to you?
Thanks
Click to expand...
Click to collapse
3 weeks, hehe... Might have been a boat ride. Don't mind really for that price
Screen price is down to $121 now, but I'll wait a bit longer
Old thread but you can find demo models on eBay for around $70. Just use the original charge port flex. Then you get the cameras and a new (used) battery too
nyttliv7 said:
Screen price is down to $121 now, but I'll wait a bit longer
Click to expand...
Click to collapse
nyttliv7 said:
Here you go:
This is what I'm looking at right now. Been looking around a lot and those two seams OK and I'm going to wait for the price (screen) to drop a bit more. It was $150 a month ago.
https://m.aliexpress.com/item/40002...d=8662amp-LQ68B83tsKefTTvVj7Y4NA1575388976474
https://m.aliexpress.com/item/40005...er_id=e78e028e9a44471092750f6d189bf509&is_c=Y
https://www.mengtor.com/brand/LG/For-LG-V-Series/For-LG-V40-ThinQ/1878.html
https://www.mengtor.com/LG/For-LG-G-Stylo-Series/For-LG-Stylo-4-|-Stylo-4-Plus/PH-BT-LG-00030-3.85V-3150mAh-Battery-for-LG-Stylo-4-Q710,Stylo-4-Plus/-V40-ThinQ-V405(BL-T37)/1842,1878,428/27979.html
Click to expand...
Click to collapse
Did you replace your screen after all? I broke mine as well , you think i can use the screen from another V40 model ? Mine is v40 ebw

Categories

Resources