Develop Bugs

[Q] gingerbreak root problem

I've been trying to root my epic 2.2 with gingerbreak and it doesn't work. I've done It before and now it says "Not sure what happened.exploit failed or reboot failed. Reboot manually and see if you have Superuser" I did everything right
Does anyone know how to fix this?

mummer96 said:
I've been trying to root my epic 2.2 with gingerbreak and it doesn't work. I've done It before and now it says "Not sure what happened.exploit failed or reboot failed. Reboot manually and see if you have Superuser" I did everything right
Does anyone know how to fix this?
Click to expand...
Click to collapse
Use the 1 click
Sent from marcusantrom v5

marcusant said:
Use the 1 click
Sent from marcusantrom v5
Click to expand...
Click to collapse
Which one?

The one for cwm 3.0.2.5
if you cant live large, look big in the coffin!!!

Also, supposedly, gingerbreak only works on phones that have odined to ec05. That's the consensus at least.
Sent from my perfect epic

musclehead84 said:
The one for cwm 3.0.2.5
if you cant live large, look big in the coffin!!!
Click to expand...
Click to collapse
I keep getting "phone not connected" any suggestions
I have tried all available options for troubleshooting and can not figure it out. The drivers are good, different cords, different Root techniques, I mean everything ... but my phone won't connect even after re-installing the samsung drivers.
Windows Vista
64 bit
phone EC05
firmware 2.2.1
stock everything

hooover said:
I keep getting "phone not connected" any suggestions
I have tried all available options for troubleshooting and can not figure it out. The drivers are good, different cords, different Root techniques, I mean everything ... but my phone won't connect even after re-installing the samsung drivers.
Windows Vista
64 bit
phone EC05
firmware 2.2.1
stock everything
Click to expand...
Click to collapse
Did you try a different usb port or a different pc, if available?
Sent from my perfect epic

zanderman112 said:
Did you try a different usb port or a different pc, if available?
Sent from my perfect epic
Click to expand...
Click to collapse
I have tried all ports on my PC, no I haven't tried to use another PC though.
I just Rooted my friends brand new epic 10 days ago. I just can't figure out how to make my device connect as itself instead of "unknown"

Try the Bonsai MasterKey Unlocker, you will like it better than the stock CWM 3.0.2.5
Sent from Bonsai 7.1.1.1

I am also going thru the same senerial a you... if you find a "fix" for this will you please reply....like wise from me. I have even tried putting th e epic in "DL" mode. But odin does not acknowlege my phone. Hit me up . Thnx.
Sent from my SPH-D700 using XDA App

Get a better usb cable radioshack has gold tip usb cables they always work. Or go too verizon and buy the usb cable for the droid pro

Top Nurse said:
Try the Bonsai MasterKey Unlocker, you will like it better than the stock CWM 3.0.2.5
Sent from Bonsai 7.1.1.1
Click to expand...
Click to collapse
I second this

pacoz said:
I am also going thru the same senerial a you... if you find a "fix" for this will you please reply....like wise from me. I have even tried putting th e epic in "DL" mode. But odin does not acknowlege my phone. Hit me up . Thnx.
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
Before Odin can detect it you must first make sure your computer can detect your phone. That way you'll know if the drivers work fine. If it does then get a new USB cable to connect it while using odin. I got a rocketfish usb cable and it works better than the samsung one...or any usb cable such as a blackberry's works fine.

hooover said:
I have tried all ports on my PC, no I haven't tried to use another PC though.
I just Rooted my friends brand new epic 10 days ago. I just can't figure out how to make my device connect as itself instead of "unknown"
Click to expand...
Click to collapse
When trying to root make sure you aren't using a stock samsung usb cable. Some have been successful using them while rooting but for most it sucks. Are you enabling usb debugging?

I am having the same problem. Gingerbreak failed to run with the same error, and no amount of different cable or port (tried three of each) will avoid the phone not connected message when attempting one click root. I'd love to hear ideas to resolve either of these or other rooting options.
Update - tried the Bonsai unlocker mentioned in this thread, and tried the one click method on a second machine to which I had never connected my device. In all cases, got a phone connection failure. And yes, I have enabled USB debugging, and when I disable it, I am able to mount the phone just fine and see the external memory card, so there's nothing wrong with the USB port or cable. I have a relatively new replacement phone that came preloaded with Froyo. Maybe something has been done to newer devices to disable this ability? Can't imagine what else could be wrong.
thanks,
-- robert

rmingee said:
I am having the same problem. Gingerbreak failed to run with the same error, and no amount of different cable or port (tried three of each) will avoid the phone not connected message when attempting one click root. I'd love to hear ideas to resolve either of these or other rooting options.
Update - tried the Bonsai unlocker mentioned in this thread, and tried the one click method on a second machine to which I had never connected my device. In all cases, got a phone connection failure. And yes, I have enabled USB debugging, and when I disable it, I am able to mount the phone just fine and see the external memory card, so there's nothing wrong with the USB port or cable. I have a relatively new replacement phone that came preloaded with Froyo. Maybe something has been done to newer devices to disable this ability? Can't imagine what else could be wrong.
thanks,
-- robert
Click to expand...
Click to collapse
My bad - apparently I didn't have the right drivers installed. I assumed since I could connect in USB mode without debugging I had the right drivers, but apparently not. Sorry to bother. In case anyone else runs into this, I apparently can't post a URL to help you, so go look for a post on the Epic "All Things Root" forum on Android Forums,
It appears I am successfully rooted after having to reboot the phone once after a failure the first time I ran. Woohoo! Now I can do a true full backup.
-- robert

The only way I could get mine to work (I would get the same errors using gingerbreak) I restored the phone to factory settings using the samsung recovery mode. Press power volume down and camera button. Your volume buttons are used to highlight the text and the home key is used to select. Wipe cache 3 times, and wipe the dalvick (spelled wrong) 3 times, then reset phone back to factory settings through here. Remember you will lose everything so back up your apps using AppBrain. I ran GingerBreak again and it worked perfectly. I would also get the same errors when trying to odin. Its been that way everysince I updated to 2.2. By the way I am EC05, did that before I updated because I was running midNight Rom.
Sent from my SPH-D700 using XDA App

I think i bricked my epic.

I was angry at my current rom which was on MTD so i decided just to you the old samsung "phone flash utility" (Epic4G_FroyoUpgrade_EB13.exe) that was uploaded on their site like a year ago to go back to stock. well i think since the phone was MTD it didnt work and now its stock at the connect cable screen, is there anything i can do?

I am running CleanGB MTD. The first time I tried to install it I had a bad download & needed to redo it from scratch. I used the Samsung EB13 Windows Installer utility to restore my phone back to stock & had no problems at all. It was up & running on MTD just had a few errors that I did not have time to fix that morning & I ran it for a few days after restoring with the utility, rooting, & restoring my backup. But now I'm enjoying the MTD goodness.....
Can you get back into download mode?
If so I would get a different USB cable & try running the installer again.

endurance1 said:
I was angry at my current rom which was on MTD so i decided just to you the old samsung "phone flash utility" (Epic4G_FroyoUpgrade_EB13.exe) that was uploaded on their site like a year ago to go back to stock. well i think since the phone was MTD it didnt work and now its stock at the connect cable screen, is there anything i can do?
Click to expand...
Click to collapse
from what ive been reading on the threads, i believe you can just odin back, and back sure you have reboot and re-partition checked marked.

I found out what the problem was. I should have known this because this happened to me once before. I was using my front USB ports. Front ports on most pc's are only 1.0 and you need to use the back 2.0 ones to work. Most people think its cable issues but its usually just USB port. This samsung utility is a complete gem! screw odin. thanks for the response!!!

endurance1 said:
I found out what the problem was. I should have known this because this happened to me once before. I was using my front USB ports. Front ports on most pc's are only 1.0 and you need to use the back 2.0 ones to work. Most people think its cable issues but its usually just USB port. This samsung utility is a complete gem! screw odin. thanks for the response!!!
Click to expand...
Click to collapse
Glad you got it working. I wasn't sure if the Samsung utility repartitioned...now I know...thanks.
Sent from my SPH-D700 using XDA App

endurance1 said:
I found out what the problem was. I should have known this because this happened to me once before. I was using my front USB ports. Front ports on most pc's are only 1.0 and you need to use the back 2.0 ones to work. Most people think its cable issues but its usually just USB port. This samsung utility is a complete gem! screw odin. thanks for the response!!!
Click to expand...
Click to collapse
Good to hear!!
Glad you got it fixed......

thanks guys. Yeah ive been using that sammy file since ec05 came out. this is the 3rd brick maybe 4th it got me out of. it works for EVERYTHING. better than odin.

Wow, I didn't know this exe thing existed. Odin has NOT been working on my home PC for tje past few weeks(months?) and that has kept me from trying anything that would require Odin to recover from, i.e. mtd.
Glad I read here in the Q&A pretty regularly. Most of the time I'm seeing if there's anyone I can help, but times like this I end up learning new things.
sent from my secret underground bunker

That sounds like a great thing to have sitting on my computer. I tried to find it but was not successful. Can anyone point me to a copy of it.
Thanks
George

ghmacdonald said:
That sounds like a great thing to have sitting on my computer. I tried to find it but was not successful. Can anyone point me to a copy of it.
Thanks
George
Click to expand...
Click to collapse
I am at work so I cannot post the file I have, but I put the file name in & searched in Google & several download options popped up.
Google Search: Epic4G_FroyoUpgrade_EB13.exe
Check it out & let me know if you need me to post a copy of the file, I saw several already on services like multiupload in the search.

Look at the thread stickied in development. The Samsung tool won't work all the time.
-Marcusant via Tapatalk

So my friend gave me his phone to see if I could fix it. It loops in CWM and won't get out of it and I can't connect with odin to it. (My phone connects just fine.) This is the only other thing I can think of. Anyone else got other ideas?
---------- Post added at 01:25 PM ---------- Previous post was at 01:08 PM ----------
Well tried it and phone still not discovered by the PC. I am at a loss at what to do. I know my friend tried to install some type of rom to it and didn't make a backup. It boots in to CWM non-stop and I can flash zips but it never leaves that loop even after the flashes. I can boot into Download mode but the phone won't be recognized. Tried both Odin and this. The phone is getting charged through the cable though which confuses me even more. Any help?!

Anyone have any ideas?! I am at a loss at what to do!

KillerFu said:
Anyone have any ideas?! I am at a loss at what to do!
Click to expand...
Click to collapse
Use a different cable with odin... it may be charging it but its not getting a data connection... also put into download mode and plug in usb... then "jiggle" the cord until it recognizes it...
Sent from my SPH-D700 using Tapatalk

Uninstall and reinstall the drivers. Then also try Odin with the battery and phone plugged in. Make sure you use a better cable than stock.

Stuck in boot loop with no USB option

I just inherited a t-mobile phone that was rooted. I installed the latest version of TWRP and tried to re-root it but now it's in a boot loop and on top of that I can't connect the phone to a computer b/c I get the "USB Device Not Recognized" message. I've re-installed the drivers and I've tried the toothpick trick. Nothing is working. What are my options?

jconway1968 said:
I just inherited a t-mobile phone that was rooted. I installed the latest version of TWRP and tried to re-root it but now it's in a boot loop and on top of that I can't connect the phone to a computer b/c I get the "USB Device Not Recognized" message. I've re-installed the drivers and I've tried the toothpick trick. Nothing is working. What are my options?
Click to expand...
Click to collapse
First wrong section...second I'd say flash a different Rom/kernel pair... or redo your recovery from Odin
Sent from my SAMSUNG-SGH-T989 using xda app-developers app

bmg002 said:
First wrong section...second I'd say flash a different Rom/kernel pair... or redo your recovery from Odin
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
First, I believe this is the correct section - the phone I am working with is a T-Mobile Galaxy S II... Second, I can't Odin because I don't have a working usb connection. I've tried several different ROMS from this fine section and I get the same result... Boot Loop

If you flashed TWRP 2.6.3, that's your problem.
Flash 2.6.1

This is the wrong section because it has nothing to do with ROM development.
With that being said if you can still boot into twrp you still have hope. Try loading a different ROM into an SD card using a converter and slide back in the phone to properly wipe first then re flash.
I don't understand why you can't get a proper USB connection going but above suggestion may solve it.
Sent from my SGH-T989 using xda app-developers app

You could always get a SD card reader, connect t to ur PC, DL a flashable twrp 2.6.1.0 and flash the recovery, then flash a ROM an u should be back in action, but above mentioned is right this is the wrong forum u need q&a
Sent from my -T989 using XDA Premium 4 mobile app

jconway1968 said:
First, I believe this is the correct section - the phone I am working with is a T-Mobile Galaxy S II... Second, I can't Odin because I don't have a working usb connection. I've tried several different ROMS from this fine section and I get the same result... Boot Loop
Click to expand...
Click to collapse
Just to confirm a few things: where do you not have the working USB connection? in download mode? If so, I'd try reinstalling the drivers.
Also, I see in your sig that you state your phones are:
Asus Nexus 7
Sprint Galaxy Note 2
Neither of which is a SGH-T989. Are you sure you are flashing the correct ROM/Kernel for your device?
also you said it came rooted but you re-rooted it. What process did you use to re-root it?
One last thing: you say you got it second hand, are you sure it is a T-Mobile galaxy S 2? May want to check under the battery for a "T989" or "i9100". The i9100 is NOT a T-Mobile galaxy S 2. It should be SGH-T989 if they didn't give you incorect info about the phone.
You could also try a different USB cable or hub. I've had USB extension cables give me grief and the front ports on my PC don't like my phone.

bmg002 said:
Just to confirm a few things: where do you not have the working USB connection? in download mode? If so, I'd try reinstalling the drivers.
Also, I see in your sig that you state your phones are:
Asus Nexus 7
Sprint Galaxy Note 2
Neither of which is a SGH-T989. Are you sure you are flashing the correct ROM/Kernel for your device?
also you said it came rooted but you re-rooted it. What process did you use to re-root it?
One last thing: you say you got it second hand, are you sure it is a T-Mobile galaxy S 2? May want to check under the battery for a "T989" or "i9100". The i9100 is NOT a T-Mobile galaxy S 2. It should be SGH-T989 if they didn't give you incorect info about the phone.
You could also try a different USB cable or hub. I've had USB extension cables give me grief and the front ports on my PC don't like my phone.
Click to expand...
Click to collapse
Thanks for your help. Here are the answers to your questions:
I think there is something wrong with the micro USB input on the phone. I have reinstalled the drivers several times. I have tried different cables and different computers. I even tried the toothpick trick. No luck.
I do have a GN2. The SG2 is for my daughter...
It is a genuine SGH-T989 I checked under the battery.

soupysoup said:
You could always get a SD card reader, connect t to ur PC, DL a flashable twrp 2.6.1.0 and flash the recovery, then flash a ROM an u should be back in action, but above mentioned is right this is the wrong forum u need q&a
Sent from my -T989 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Where do I find and how do I put a flashable twrp 2.6.1.0 on my micro sd card? I've always used goomanager in the past but obviously that won't work in this case...

jconway1968 said:
Where do I find and how do I put a flashable twrp 2.6.1.0 on my micro sd card? I've always used goomanager in the past but obviously that won't work in this case...
Click to expand...
Click to collapse
Everything I've found requires a computer connection. I need to be able to flash it back from v2.6.3.1 using TWRP to do it. Is that possible?

soupysoup said:
You could always get a SD card reader, connect t to ur PC, DL a flashable twrp 2.6.1.0 and flash the recovery, then flash a ROM an u should be back in action, but above mentioned is right this is the wrong forum u need q&a
Sent from my -T989 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
One more piece of information that might be helpful... When I try to wipe the cache I get this message "Formatting Data using make_ext4fs function" and it stays stuck there. I've left it for over 30 minutes and it doesn't ever move from that screen. Hope that helps... I really need some help here.

jconway1968 said:
One more piece of information that might be helpful... When I try to wipe the cache I get this message "Formatting Data using make_ext4fs function" and it stays stuck there. I've left it for over 30 minutes and it doesn't ever move from that screen. Hope that helps... I really need some help here.
Click to expand...
Click to collapse
In twrp settings change it to use rm instead of formatting
Sent from my SAMSUNG-SGH-T989 using xda app-developers app

jconway1968 said:
Everything I've found requires a computer connection. I need to be able to flash it back from v2.6.3.1 using TWRP to do it. Is that possible?
Click to expand...
Click to collapse
If u go to the dev section on this phone and look around a bit, u will find the twrp thread, in that thread is a flashabke copy of 2.6.1.0, if u can't find it pm me, I have a copy, all u would need to do is put the zip file on any micro SD card then put it in the phone and flash it with the twrp u have now, it will revert it back to 2.6.1.0 and that should fix ur prob, but like I said of u can't find it pm me and I'll shoot u a copy
Sent from my -T989 using XDA Premium 4 mobile app

soupysoup said:
If u go to the dev section on this phone and look around a bit, u will find the twrp thread, in that thread is a flashabke copy of 2.6.1.0, if u can't find it pm me, I have a copy, all u would need to do is put the zip file on any micro SD card then put it in the phone and flash it with the twrp u have now, it will revert it back to 2.6.1.0 and that should fix ur prob, but like I said of u can't find it pm me and I'll shoot u a copy
Sent from my -T989 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Ok so I Flashed it and now it's stuck on the Blue Teamwin screen???

jconway1968 said:
Ok so I Flashed it and now it's stuck on the Blue Teamwin screen???
Click to expand...
Click to collapse
Let it sit on the TeamWin screen for a minute or so... I find it sometimes takes a little bit.
If it doesn't ever get past there, try hooking it up to a PC and see if you can get ADB to load (presuming you have ADB installed and ADB drivers installed). If you can, try to do an "adb pull /proc/last_kmsg" and a "adb logcat > logcat.txt" and zip those up and toss them on here.
If you CAN'T get into adb, I would try hooking the phone up to Kies and see if it will do anything for you.
Or you could try following this guide as you have the T-Mobile SGH-T989 (not the Telus SGH-T989D):
http://forum.xda-developers.com/showthread.php?t=1513359
BUT make sure to grab the correct stock image file for whatever version your android currently is (ie if you are on Android 2.3.6, then make sure to get the T-mobile KL1 2.3.6 stock image).
Also, what ROM did you flash? was it a 4.3 ROM? If so, did you update your radio before you flashed the ROM? I think 4.1+ needs the updated radio to function properly.
I know you said you can't connect through ODIN, but I'm hoping it is because of some odd driver or odd ODIN version. That thread has the stuff to make it all work I believe.
I'm really hoping you can get ADB to work. If you can pull a logcat of your bootup process, it will be much easier to figure out what went wrong.

bmg002 said:
Let it sit on the TeamWin screen for a minute or so... I find it sometimes takes a little bit.
If it doesn't ever get past there, try hooking it up to a PC and see if you can get ADB to load (presuming you have ADB installed and ADB drivers installed). If you can, try to do an "adb pull /proc/last_kmsg" and a "adb logcat > logcat.txt" and zip those up and toss them on here.
If you CAN'T get into adb, I would try hooking the phone up to Kies and see if it will do anything for you.
Or you could try following this guide as you have the T-Mobile SGH-T989 (not the Telus SGH-T989D):
http://forum.xda-developers.com/showthread.php?t=1513359
BUT make sure to grab the correct stock image file for whatever version your android currently is (ie if you are on Android 2.3.6, then make sure to get the T-mobile KL1 2.3.6 stock image).
Also, what ROM did you flash? was it a 4.3 ROM? If so, did you update your radio before you flashed the ROM? I think 4.1+ needs the updated radio to function properly.
I know you said you can't connect through ODIN, but I'm hoping it is because of some odd driver or odd ODIN version. That thread has the stuff to make it all work I believe.
I'm really hoping you can get ADB to work. If you can pull a logcat of your bootup process, it will be much easier to figure out what went wrong.
Click to expand...
Click to collapse
You guys are great!!! I really appreciate all the help. No matter what I do, ADB, Kies, different cables, different computers, nothing gets past the "USB Device Not Recognized" pop up. I let it sit for 15 minutes, twice. Still no love... I loaded TWRP_2.6.1.0_Hercules and then reboot and that's when it got stuck. Prior to that I had loaded TMobileT989UVMC6RootedDeodexed Rom. I forget where I got it. I'm pretty sure it was a 4.1.2 based rom.

jconway1968 said:
You guys are great!!! I really appreciate all the help. No matter what I do, ADB, Kies, different cables, different computers, nothing gets past the "USB Device Not Recognized" pop up. I let it sit for 15 minutes, twice. Still no love... I loaded TWRP_2.6.1.0_Hercules and then reboot and that's when it got stuck. Prior to that I had loaded TMobileT989UVMC6RootedDeodexed Rom. I forget where I got it. I'm pretty sure it was a 4.1.2 based rom.
Click to expand...
Click to collapse
weird... I am not sure why it is being so fussy with your phone.
Hopefully somebody has a better suggestion than I do, but my next thought is to try ebay-ing the phone in hopes that somebody gives you a few bucks for it. It sounds to me like the internal memory module is dying and the USB port is shot.
Is your water damage sticker pink/red or missing? It should be under the battery.
I hate thinking that the phone is just dead, but without being able to connect it to the PC in either recovery or download mode and not being able to boot into a ROM or recovery, I think the next step is to scrap it and hope somebody can send you a few bucks... or if you have experience soldering, maybe try replacing the USB connector?
I could be wrong mind you... The only time I had issues like that it was due to a badly flashed recovery and I needed to use ODIN to get back up and running. As a thought, do you have a Windows XP 32-bit computer you could try plugging the phone into? And while the phone is plugged in, can you check device manager for all devices? maybe try installing the drivers manually? I suggest windows XP 32bit because that is what I use the majority of the time with my phone. I've also used Windows 7 64-bit and it worked.

bmg002 said:
weird... I am not sure why it is being so fussy with your phone.
Hopefully somebody has a better suggestion than I do, but my next thought is to try ebay-ing the phone in hopes that somebody gives you a few bucks for it. It sounds to me like the internal memory module is dying and the USB port is shot.
Is your water damage sticker pink/red or missing? It should be under the battery.
I hate thinking that the phone is just dead, but without being able to connect it to the PC in either recovery or download mode and not being able to boot into a ROM or recovery, I think the next step is to scrap it and hope somebody can send you a few bucks... or if you have experience soldering, maybe try replacing the USB connector?
I could be wrong mind you... The only time I had issues like that it was due to a badly flashed recovery and I needed to use ODIN to get back up and running. As a thought, do you have a Windows XP 32-bit computer you could try plugging the phone into? And while the phone is plugged in, can you check device manager for all devices? maybe try installing the drivers manually? I suggest windows XP 32bit because that is what I use the majority of the time with my phone. I've also used Windows 7 64-bit and it worked.
Click to expand...
Click to collapse
Thanks again for your time and suggestions... I've always been very impressed with the xda community. I actually got this phone, used, from Swappa. And I am in the process of returning it for a refund. But the seller is being difficult and is trying to stick me with the phone. I was just trying to salvage it on my own, just in case... Thanks again.

jconway1968 said:
Thanks again for your time and suggestions... I've always been very impressed with the xda community. I actually got this phone, used, from Swappa. And I am in the process of returning it for a refund. But the seller is being difficult and is trying to stick me with the phone. I was just trying to salvage it on my own, just in case... Thanks again.
Click to expand...
Click to collapse
that sucks. I've heard good things about Swappa, but living in Canada I can't use it. My opinion it sounds like you got a dud and based on how hard the guy is fighting to not give you a refund, I wouldn't be surprised if he knew it was doa and just fluked out and get it running before he sold it. Or maybe it got water damaged and he knew it would fail soon so he sold it before it completely quit.
I hope you get it all sorted out.
Good luck and sorry I couldn't be more helpful.

bmg002 said:
that sucks. I've heard good things about Swappa, but living in Canada I can't use it. My opinion it sounds like you got a dud and based on how hard the guy is fighting to not give you a refund, I wouldn't be surprised if he knew it was doa and just fluked out and get it running before he sold it. Or maybe it got water damaged and he knew it would fail soon so he sold it before it completely quit.
I hope you get it all sorted out.
Good luck and sorry I couldn't be more helpful.
Click to expand...
Click to collapse
You were great!!! Thanks again...

**SOLVED** Any/All ODIN flashes FAIL!

SOLVED: see post #5 & #8
I've been trying to root my T807T and everyone with one on the forums here has reported that all T805 stuff works just fine on it.
I have installed USB drivers, USB Debugging set to on. Been using Odin 3.07 as well as 3.09.
I tried multiple USB ports and two computers and a whole lot of different wires (including original ones).
I disabled my Anti-virus and do not have Kies installed.
I am not a newbie to flashing and have been rooting Samsungs since the first Galaxy S Vibrant all those years ago. I have never seen anything like this.
Everything I try to flash in Odin comes up with FAIL! after about halfway through flashing. I can restart my tablet and everything works fine, but this is making it impossible to root.
FAIL occurs right after "NAND Write"
Any/all help is very much appreciated. If anyone is NYC local and can give it a shot, that'd be great.
Thanks everyone.

I would suggest taking a look at this thread. http://forum.xda-developers.com/showthread.php?p=54393309
Install kies and reinstall drivers with kies probably would help?

DUHAsianSKILLZ said:
I would suggest taking a look at this thread. http://forum.xda-developers.com/showthread.php?p=54393309
Install kies and reinstall drivers with kies probably would help?
Click to expand...
Click to collapse
I've read that thread before, not the same issue. But thanks for the heads up nevertheless

postulio said:
I've read that thread before, not the same issue. But thanks for the heads up nevertheless
Click to expand...
Click to collapse
I would uninstall the drivers and try to install the drivers from kies. Other than that, Im not sure why it wouldnt work.

I have been digging a lot on the issue. Of course I haven't been able to find a whole lot other then it appears 95 percent of these nand write issues are with samsung devices. Make sure that in settings>general>security reactivation lock is OFF. Also try removing your SIM card and the SD card if you have one. Then proceed to flash. We have the exact same model, firmware, build, etc etc. I can't think of a logical reason why it won't work. I'd be inclined to believe it's a communication issue between tablet and computer at this point. Completely stumped on this one however I will keep digging for you.

DUHAsianSKILLZ said:
I would uninstall the drivers and try to install the drivers from kies. Other than that, Im not sure why it wouldnt work.
Click to expand...
Click to collapse
no go.

postulio said:
no go.
Click to expand...
Click to collapse
Does your tar have .md5 at the end of the filename? I think it should fail earlier if this is the problem but maybe its not being properly verified? Its just a shot in the dark but try removing the .md5 if its there and just flash the straight .tar file. Or retry download maybe you got a corrupt copy.
Sent from my Nexus 7 using XDA Free mobile app

Ripx88 said:
I have been digging a lot on the issue. Of course I haven't been able to find a whole lot other then it appears 95 percent of these nand write issues are with samsung devices. Make sure that in settings>general>security reactivation lock is OFF. Also try removing your SIM card and the SD card if you have one. Then proceed to flash. We have the exact same model, firmware, build, etc etc. I can't think of a logical reason why it won't work. I'd be inclined to believe it's a communication issue between tablet and computer at this point. Completely stumped on this one however I will keep digging for you.
Click to expand...
Click to collapse
HAHAHAHA BINGO!!!!
woooo!
cfautoroot: BAM! worked first try.
everybody dance.
Thank you very much for this genius tidbit. I must've enabled it the first day I got the tablet and forgot all about it as It's never been an option on any of my other devices.
Huge thanks to both of you guys for bending over backwards trying to find a solution as to why the flashing wasn't working. Now we know.
Pretty clever of Samsung to hide an Odin flash lockout switch within the actual OS (as opposed to recovery).

I can't figure out how to root my device.

Towel Root method won't run because my phone cancels it's installation. Odin isn't recognizing my device. Then I tried the Terminal Emulator method, but no matter which directory I put the files into it always gets to a point where I get an error. Where am I going wrong? Any ideas? If you need anymore info to determine a solution, please let me know.
Sent from my SPH-L710T

Does your computer even see it as a device? Like a USB external drive?
Are you in download mode when trying odin?
Also, when that happens to me, it is because I'm using a cheap cable that does not support data. You might want to try a good quality microusb cable.
Can your phone change via your usb port

meeniemuffin said:
Towel Root method won't run because my phone cancels it's installation. Odin isn't recognizing my device. Then I tried the Terminal Emulator method, but no matter which directory I put the files into it always gets to a point where I get an error. Where am I going wrong? Any ideas? If you need anymore info to determine a solution, please let me know.
Sent from my SPH-L710T
Click to expand...
Click to collapse
Your phone is not an SPH-L710. You have an SPH-L710T. This means that not everything L710 will work on your phone, so just be aware of that. Do you have USB Debugging enabled? Also, what carrier are you using?

Powered_By_Linux said:
Your phone is not an SPH-L710. You have an SPH-L710T. This means that not everything L710 will work on your phone, so just be aware of that. Do you have USB Debugging enabled? Also, what carrier are you using?
Click to expand...
Click to collapse
I am aware of this. I am on Boost Mobile, are there any keywords I should know to determine compatibility?
lvpre said:
Does your computer even see it as a device? Like a USB external drive?
Are you in download mode when trying odin?
Also, when that happens to me, it is because I'm using a cheap cable that does not support data. You might want to try a good quality microusb cable.
Can your phone change via your usb port
Click to expand...
Click to collapse
My computer does recognize my device and it just hit me that I am supposed to be in Download Mode. Ill try this method when I am less afraid of downloading Odin, last time I downloaded a legitimate-looking virus. Backed up and restored but now I'm iffy. Also, I have good quality cable, its no problem for me.

meeniemuffin said:
I am aware of this. I am on Boost Mobile, are there any keywords I should know to determine compatibility?
My computer does recognize my device and it just hit me that I am supposed to be in Download Mode. Ill try this method when I am less afraid of downloading Odin, last time I downloaded a legitimate-looking virus. Backed up and restored but now I'm iffy. Also, I have good quality cable, its no problem for me.
Click to expand...
Click to collapse
Just making sure . You are correct in saying that you have to be in download mode. Sadly, Odin is pretty shifty. As an alternative you could try Heimdall: http://glassechidna.com.au/heimdall/ It didn't work when I rooted my SPH-L710 a few months back, and I had to find an Odin download, but it's worth a shot.
As a side note (if you don't know about it already) this seems to be a pretty good resource for your phone.
Best of luck!

Powered_By_Linux said:
Just making sure . You are correct in saying that you have to be in download mode. Sadly, Odin is pretty shifty. As an alternative you could try Heimdall: http://glassechidna.com.au/heimdall/ It didn't work when I rooted my SPH-L710 a few months back, and I had to find an Odin download, but it's worth a shot.
As a side note (if you don't know about it already) this seems to be a pretty good resource for your phone.
Best of luck!
Click to expand...
Click to collapse
Did NOT know about that link, which I found to be pretty helpful, thanks for the guidance.