CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.1 (Jelly Bean), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
IMPORTANT NOTICE
Starting next nightly (October 31st, 2012), you will be required to have Jelly Bean bootloader to be able to boot CyanogenMod 10. Please follow http://forum.xda-developers.com/showthread.php?t=1894867 to make your nvflash blobs if you're still on ICS bootloader, then flash official Asus Jelly Bean update to update your bootloader. You will be required to flash a new jellybean-bootloader-enabled recovery - so take care and backup your files.
As a result, the ROM is now much smoother and stabler.
DOWNLOADS
Click to expand...
Click to collapse
Google Apps:
http://d-h.st/rDK
Nightlies:
http://get.cm/?device=tf300t
HOW TO INSTALL
Click to expand...
Click to collapse
First installation :
1) Unlock your device, and install CWM recovery : http://forum.xda-developers.com/showthread.php?t=1668173
2) Push the update zip to your internal memory
3) Reboot in recovery (Shutdown tablet, press Vol Down + Power, then press Vol Up when prompted)
4) Make a backup
5) Navigate to "Install zip from sdcard", "Choose zip from sdcard", and choose the update zip you previously pushed to your tablet
5a) If you want Play Store, flash gapps now too (link above)
6) Go back and Wipe data/cache
7) Reboot
Updating from previous build:
1) Push update zip to /sdcard/
2) Reboot in recovery
3) Flash as above
4) Reboot
If any issue after updating, wipe data.
CHANGELOG
Click to expand...
Click to collapse
http://changelog.bbqdroid.org/#tf300t/cm10/next
SOURCES
Click to expand...
Click to collapse
http://github.com/cyanogenmod
http://github.com/cyanogenmod/android_kernel_asus_tf300t
http://github.com/cyanogenmod/android_device_asus_tf300t
DEVELOPERS
Click to expand...
Click to collapse
loganmc10, xplodwild, bumble-bee (for tf201 device tree from which this tree is inspired), cyanogenmod
SUPPORT US
Click to expand...
Click to collapse
You can either help us by giving FULL bug reports WITH LOGS, WITH REPRO CASE, ETC, or by submitting patches.
If you're not a developer, but still want to support you can hit the "Donate to me" button up ahead - and don't forget to give some bucks to loganmc10 - he did a lot of work for Jelly Bean on our tablet.
Thanks to all donators!
Reserved for my Video Overviews
Will definitely test this out this upcoming weekend!
Not to be the picky one but the thread is for JB but the first line looks like a copy pasta from the ICS thread.
I know that the people who *should* be flashing this should be able to work it out, but experience with the SGS thread has taught me you'll likely get a lot of n00bs making "is this for JB or ICS?"
just saying....
Sent from my Transformer Pad TF300T using xda app-developers app
Nice looking forward to it, BUT (as always) will there be a separate version for the TF300TG or will it be for both in the end?
Best and thanks for the information,
Blubberor
thanks so much! does anyone know if GPS is working in this release?
uluaz said:
thanks so much! does anyone know if GPS is working in this release?
Click to expand...
Click to collapse
No GPS so far. But as ASUS has released it's own JB release it should not not take too long to fix it in JB.
uluaz said:
thanks so much! does anyone know if GPS is working in this release?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=30495112&postcount=558
Awesome post!Thanks for the share.
wogfella said:
Not to be the picky one but the thread is for JB but the first line looks like a copy pasta from the ICS thread.
I know that the people who *should* be flashing this should be able to work it out, but experience with the SGS thread has taught me you'll likely get a lot of n00bs making "is this for JB or ICS?"
just saying....
Sent from my Transformer Pad TF300T using xda app-developers app
Click to expand...
Click to collapse
If people can't read "4.1.1" and "CyanogenMod 10", and realize it's not "4.0.4" and "CyanogenMod 9", I can't help them. I can't see why it should be different either as the procedures are the same.
I should be able to flash these nightlies over the unofficial build from logan's thread without a wipe, right?
Will this be supported by ROM Manager, for the nightlies?
RolloJarvis said:
I should be able to flash these nightlies over the unofficial build from logan's thread without a wipe, right?
Click to expand...
Click to collapse
That should do it, at least it did for me comming from unofficial CM10. If you encounter problems, wipe.
TonyStark said:
Will this be supported by ROM Manager, for the nightlies?
Click to expand...
Click to collapse
I think there is no ROM Manager for the TF300 yet. Like stated in starting post in kind of striking typography.
Sweeet, running "Unofficial" CM10 from logans thread, I suppose it's the same, so only a dalvik cache and cache wipe?
Thanks a lot, cheers!
Edit: just saw the above post, sorry!
rwa66 said:
I think there is no ROM Manager for the TF300 yet. Like stated in starting post in kind of striking typography.
Click to expand...
Click to collapse
Well thank you for that... I guess. My question was aimed at XpLoDWilD for an answer, as RM usually starts working when a nightley is started. So my question is for the dev team asking if it will be tied to RM.
XpLoDWilD said:
If people can't read "4.1.1" and "CyanogenMod 10", and realize it's not "4.0.4" and "CyanogenMod 9", I can't help them. I can't see why it should be different either as the procedures are the same.
Click to expand...
Click to collapse
You are correct sir, hence my comment. But my point was to try and limit the number of useless "durrr what is this thing that I am doing to my tablet" posts. As I said, you'd expect people trying to flash CM to know but....no....too many don't. Have a look over at Pawitp's SGS I9000 CM10 thread if you don't believe me.
Now to a semi-bug report that can actually be classified as OT.
When doing fresh install or after factory reset, during the setup phase the back and home buttons are hidden (which is fine). But if at any time during setup you press the "keyboard settings" button (say, to turn off the key press sounds because you're flashing at 4am ) you have no way of going back to the setup (as the back button is not available). The only way back is to reboot.
Don't know if this stock Android issue as I don't own a nexus device, and I don't recall if this is an issue in ICS or before.
And I'm not saying its interrupting daily usage of the device as it really will come up rarely for users but....just putting it out there as a low one on the "gonna fix" list.
Yes, its very very minor. But other than the GPS and the missing data usage (and associated jelly bean tricks that hang off data usage) there is ZERO things wrong with this ROM. Logan has done a top-notch job
Sent from my Transformer Pad TF300T using xda app-developers app
The for the changelog link xplode... I've wondered if the newer build was necessary and now I can see for myself.
H/W Decode?
There's no H/W decoding yet, is that right? I'm not getting it in MX Video Player with CM10, I came from CM9 Final. Or could it just be MX, H/W decode comes on by default but the video plays choppy now.... so does this mean CM10 TF300T is with or without H/W decode, or is just MX? If either I can roll back to my CM9 image no problem.
Cheers.
Posting just to have this in my participated section.
Sent from my Transformer Pad TF300T using xda app-developers app
8BitVoxel said:
There's no H/W decoding yet, is that right? I'm not getting it in MX Video Player with CM10, I came from CM9 Final. Or could it just be MX, H/W decode comes on by default but the video plays choppy now.... so does this mean CM10 TF300T is with or without H/W decode, or is just MX? If either I can roll back to my CM9 image no problem.
Cheers.
Click to expand...
Click to collapse
It is not only you. My MX player doesn't have h/w decode. I don't have sound playing any video either.
Sent from my Transformer Pad TF300T using XDA Premium HD app
gsantovena said:
It is not only you. My MX player doesn't have h/w decode. I don't have sound playing any video either.
Sent from my Transformer Pad TF300T using XDA Premium HD app
Click to expand...
Click to collapse
Here found the same bug, other working fine
Enviado desde mi ASUS Transformer Pad TF300T usando Tapatalk 2
Related
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.0 (Ice Cream Sandwich), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Instructions:
First time flashing CyanogenMod 9.0 your device, or coming from another ROM?
Root the device and install ClockworkMod Recovery. Instructions are available here.
Perform a NANDroid backup of your current ROM.
Format the system, data & cache partitions of your device.
Perform a factory reset.
Flash CyanogenMod.
Optional: Install the Google Apps addon package.
Upgrading from earlier version of CyanogenMod 9?
Perform a NANDroid backup of your current ROM.
Flash CyanogenMod (your Google Apps will be backed up & restored automatically).
Issues?
Experience issues? Please provide the following info to our bug tracker:
If the device was hard reboot, please provide the file "/proc/last_kmsg".
If the device was soft reboot or is "bootlooping", please run a logcat and provide the full output.
Please use Pastebin when possible.
Download Links:
CyanogenMod:
Latest version: cm-9.0.0-KalimAz 9.0
Download CM10 v0.2: link ( MIRROR )
Download CM9: link
Mirror: link
MD5sum: 6f0a03f9d1b347669b7017058ade7c75Night Builds can be found here: http://get.cm/?device=maguro ChangeLog: http://changelog.bbqdroid.org/#maguro/cm9/next
Google Apps addon: ( Only for CM9 )
Version: gapps-ics-20120317
Mirror: link
Mirror: link
TO MAKE A CLEAN INSTALL. LOOK HERE:
Reboot into Recovery
Make a backup ( optional to be able to go back anytime )
Wipe data/factory reset
Wipe cache partition
Then flash the Android ROM
Then flash Gapps
REPORT ISSUES ONLY IF:
You made a clean intall
You use the default kernel
You have not installed new framework
You have confirmed the issue is there with default CPU speed
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
What is new:
CM9
V9.0:
Kernel is fully converted from 4.1. Be carefull, kernels from ics are not compatible with that ROM.
Options to remove sound from camera ( focus and shot )
Added an option into camera to select the time to wait after Touch top focus before the next autofocus
You can install from ROMManager
Torch Enabled
...
CM10
V0.1:
1st version.
...
V0.2:
Camera now works right. Fist time you boot open first gallery to allow this ap to make all cache from your photos. After you can enable camera otherwise 1st time will take long to start the camera.
Camera video working too
NFC working and all the rest of the hardware
Added T9 to call.
Added Torch.
...
Is it based on 4.1
darrenng_ff said:
Is it based on 4.1
Click to expand...
Click to collapse
Kernel is based on 4.1 and merged with all the CM kernel features.
ROM is based on ics with few additions from jellybean.
As soon as I have more sources I will implement more from jellybean.
Yes ! Welcome Kalim to Gnex ! I loved your work for Nexus S, so good to see you here.
kptnk said:
Yes ! Welcome Kalim to Gnex ! I loved your work for Nexus S, so good to see you here.
Click to expand...
Click to collapse
Thanks.
I will try to do the same as I am doing in nexus S. Maenwhile maintaining Nexus S and Galaxy Nexus on CM I will also make some intermediate releases like the nightbuilds but fully tested by my testers so you can have some early stages of all we are doing at CM.
Kalim
KalimochoAz said:
Thanks.
I will try to do the same as I am doing in nexus S. Maenwhile maintaining Nexus S and Galaxy Nexus on CM I will also make some intermediate releases like the nightbuilds but fully tested by my testers so you can have some early stages of all we are doing at CM.
Kalim
Click to expand...
Click to collapse
That's great and very much appreciated
Thanks for your work!
john9 said:
Thanks for your work!
Click to expand...
Click to collapse
np, thanks
great work bro!
will test
I got a few questions though:
1) which features did you merge in from jb?
2) why should we use the 20120317 gapps and not the latest (20120429) ?
Keep going!
m4gic said:
great work bro!
will test
I got a few questions though:
1) which features did you merge in from jb?
2) why should we use the 20120317 gapps and not the latest (20120429) ?
Keep going!
Click to expand...
Click to collapse
1.- graphic and radio ports.
2.- because it the version whitch we have done the tests.
Thx. Will give a try today.
Hi KalimochoAz (you are CM maintainer of NS/GN, afaik )
1. CyanogenMod composed of full JellyBean CM"10"?
2. from now on, you release manual build here?
Welcome kalim,
Love your work for the nexus s. Always reliable. Will now test jb Rom. Thanks!
Sent from my Galaxy Nexus using xda premium
daskalos.healing said:
Hi KalimochoAz (you are CM maintainer of NS/GN, afaik )
1. CyanogenMod composed of full JellyBean CM"10"?
2. from now on, you release manual build here?
Click to expand...
Click to collapse
Just follow the thread and you will see what is posted and when.
daskalos.healing said:
Hi KalimochoAz (you are CM maintainer of NS/GN, afaik )
1. CyanogenMod composed of full JellyBean CM"10"?
2. from now on, you release manual build here?
Click to expand...
Click to collapse
1.- this is not fully jb build. When we see all the code will be the moment to decide if this will be an extension of cm9 or a new version, not I can't really tell you what will be.
2.-If you ask for how to build yourself cm9, this is the manual: http://wiki.cyanogenmod.com/wiki/Galaxy_Nexus_(GSM):_Compile_CyanogenMod_(Linux)
Kalim
LuvinN1 said:
Welcome kalim,
Love your work for the nexus s. Always reliable. Will now test jb Rom. Thanks!
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
I hope you like the same work in here
KalimochoAz said:
I hope you like the same work in here
Click to expand...
Click to collapse
I also enjoyed your work on the Nexus S. Glad to see you here.
I have something weird going on. I'm running JB stock and I can view the 2nd page of this thread but not the first. Tapatalk will force close. No other threads do this on any other page. Could someone post the link to the download or loads of this ROM on page 2 or 3 so I can download it. My computer is at work and I want to try this one
Sent from my Galaxy Nexus using Tapatalk 2
dhollis72 said:
I have something weird going on. I'm running JB stock and I can view the 2nd page of this thread but not the first. Tapatalk will force close. No other threads do this on any other page. Could someone post the link to the download or loads of this ROM on page 2 or 3 so I can download it. My computer is at work and I want to try this one
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
I had the same problem - press settings, then select web view and it will open the thread in your browser.
Sent from my Galaxy Nexus using Tapatalk 2
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.2.2 (JB), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
WIKI
Click to expand...
Click to collapse
Official CyanogenMod Wiki: http://wiki.cyanogenmod.org/w/D710_Info
INSTALLATION
Click to expand...
Click to collapse
First time installing CyanogenMod 10.1 to your Epic 4G Touch, or coming from another ROM:
- Copy GApps and CM 10.1 zip's to your internal SD Card
- Make sure you're NOT RUNNING A KERNEL WITH THE MMC-SUPERBRICK-BUG
- Make sure you're running a proper working ClockworkMod-Recovery
- Make sure you're not running a JB modem
- Boot into recovery
- Flash CM 10.1 zip from internal SD Card
- Flash GApps zip from internal SD Card
- DO A DATA WIPE / FACTORY RESET (otherwise your device will be stuck at boot)
- Reboot
- Don't restore system data using Titanium Backup!
- Restoring Apps + Data might cause problems and is not recommended, avoid it if possible!
Upgrading from earlier version of CyanogenMod 10.1:
- Copy CM 10.1 zip to your internal SD Card
- Boot into recovery
- Flash CM10.1 zip from internal SD Card
- Reboot
Upgrading from CyanogenMod 9:
- Copy 4.2.2 GApps and CM 10.1 zip's to your SD Card
- Boot into recovery
- Flash CM 10.1 zip from SD Card
- Flash GApps zip from SD Card
- Reboot
DOWNLOAD
Click to expand...
Click to collapse
CM 10.1 official nightly builds:
http://www.get.cm/?device=d710
Google Apps:
http://goo.im/gapps
CHANGELOG
Click to expand...
Click to collapse
http://review.cyanogenmod.org/#/q/status:merged+branch:cm-10.1,n,z
http://changelog.bbqdroid.org/#/d710/next
DONATIONS
Click to expand...
Click to collapse
If you want to donate a few bucks for the work:
Thanks to all donators!
First! Thanks Dastin, you are the man! Now go relax with your amazing girlfriend lol.
Sent from my SPH-D710 using xda premium
Nicely done bro!
Sent from my SPH-D710 using xda app-developers app
Wait.... WHAT!
Mind.. Blown.
Sent from my SPH-D710 using Tapatalk 4
It looks like the change log is pointing to the wrong branch, shouldn't it be http://review.cyanogenmod.org/#/q/status:merged+branch:cm-10.1,n,z ??
Sent from my SPH-D710 using xda premium
Well i stayed up to install it. So far so good. I was holding out on an older WFTN build one before many people started having wifi and data issues.
GPS 3G, 4G, WIfi all working well so far. Won't really know for a day or two. Can't be sure of anything but my initial impressions are good.
Whoa!! Thank you! Great Job man!
official! better late than never, amazing work dastin
Sent from my HTCONE using Tapatalk 2
=]
Congrats buddy, Good job. But i don't get why i cant find it under devices on the cya site?
Edit: Did any drastic changes or anything really change from unofficial? JB modems do work with 4g ONLY no 3g support
http://dl.xda-developers.com/attach.../9/0/6/7/5/Screenshot_2013-08-15-10-34-02.jpg
thanks for getting our phone recognized....Finally!!! Great job bro!
Great Work. I have been waiting for this day!
Side Note as I see it was asked, there is no data while on JB Modem. We know this to be true because, Dastin hasnt mentioned it as a fix in WFTN Build as of yet. Also, just to confirm. I flashed a JB modem and come to a result with no data.
=]
Thanks, i didn't see it in op to not use a modem and i thought that was the requirement for it to become a CM official rom.
elzero26 said:
Great Work. I have been waiting for this day!
Side Note as I see it was asked, there is no data while on JB Modem. We know this to be true because, Dastin hasnt mentioned it as a fix in WFTN Build as of yet. Also, just to confirm. I flashed a JB modem and come to a result with no data.
Click to expand...
Click to collapse
woooo
JB modems do work. proof is in the pudddin (4g only)
http://dl.xda-developers.com/attach.../9/0/6/7/5/Screenshot_2013-08-15-10-34-02.jpg
So just for the record, how will WFTN differ from these nightly releases now since we have official support?
Pretty sure WFTN will be dead as hes going to continue to work on this rom and tweak it to make it perfect. With it being official i assume hell be getting alot more assistance from the cya community which will be great! other more exp people will have to elaborate more than me
darklavalizard said:
So just for the record, how will WFTN differ from these nightly releases now since we have official support?
Click to expand...
Click to collapse
darklavalizard said:
So just for the record, how will WFTN differ from these nightly releases now since we have official support?
Click to expand...
Click to collapse
Had exactly the same question.
Really nice work btw. Will likely be moving away from this device soon but will certainly keep running your builds on it as it'll make a good play/backup device.
---------- Post added at 09:56 AM ---------- Previous post was at 09:52 AM ----------
papertown11 said:
Pretty sure WFTN will be dead as hes going to continue to work on this rom and tweak it to make it perfect. With it being official i assume hell be getting alot more assistance from the cya community which will be great! other more exp people will have to elaborate more than me
Click to expand...
Click to collapse
My understanding was that official cm builds needed to remain pretty "pure" while wftn would give the flexibility to add whatever tweaks dastin wants. I've asked the same question and may be making all of this up. So I'll let dastin tell us for sure.
All up to dastin for sure. I don't know why he'd wanna start adding tweaks and halos and stuff when he was going for pure and clean before but if he wants to start dabbling with wftn like that he can but as he always says he doesn't have much time so i figured he'd pretty much drop it and move on to full support of this i may be wrong but hell be the only one to answer it.
gg_99 said:
Had exactly the same question.
Really nice work btw. Will likely be moving away from this device soon but will certainly keep running your builds on it as it'll make a good play/backup device.
---------- Post added at 09:56 AM ---------- Previous post was at 09:52 AM ----------
My understanding was that official cm builds needed to remain pretty "pure" while wftn would give the flexibility to add whatever tweaks dastin wants. I've asked the same question and may be making all of this up. So I'll let dastin tell us for sure.
Click to expand...
Click to collapse
OK flashed the Nightly and keyboard force closes the whole time. Can't type anything including my Google account. MD5 sum matches though. Well, it's 1:30 in the morning here so I'll just continue tomorrow. Just a heads up.
Sent from my Nexus 7 using Tapatalk 2
=]
I've actually set up fresh 3 times and it works perfect for me . Do your standard wipe factory/ wipe dev cash then reload gapps and you should be fine. Load a gb modem too you should be gtg
sol_671 said:
OK flashed the Nightly and keyboard force closes the whole time. Can't type anything including my Google account. MD5 sum matches though. Well, it's 1:30 in the morning here so I'll just continue tomorrow. Just a heads up.
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.3 (Jelly Bean), which is designed to increase performance and reliability over stock Android for your device.
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
This is a preview build of CyanogenMod 10.2
Sauce: https://github.com/CyanogenMod
Downloads
Firmware: http://get.cm/?device=p1 (Grab the builds that start with "cm-10.2-")
Google Apps: 1 (Make sure you grab the correct version, for CyanogenMod 10.2 / Android 4.3.0)
Installation
Note: this firmware uses the same partition layout as CyanogenMod 10.1 nightly builds.
Do a Nandroid Backup!
Install the firmware using ClockworkMod Recovery
Optionally install the Google Addon
Known Issues
Bootanimation looks weird for the first few seconds.
Still image capture from the front camera doesn't work.
Change Log
20130814
Initial release
Reporting Bugs
You are allowed to report bugs only in this thread. Note that this is a preview release and non-device specific bugs will not be accepted. Before reporting a bug, please make sure you are running as stock as possible. This means no custom kernel, no custom framework modification, etc. If you are using any of the above modifications, please flash the rom again to get rid of the modifications before reporting.
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved.
Use these commands to get a logcat and dmesg
Code:
adb root
adb logcat > logcat.txt (wait for a few seconds then press Ctrl + C)
adb shell dmesg > dmesg.txt
Credits
humberos, sbradymobile, jt1134, pawitp and everyone else involved in coding and debugging.
Works perfectly so far. Everything works. Battery backup is good too. The option to disable hardware keys is missing I guess but that's alright. Thanks for your hard work.
Sent from my GT-P1000 using Tapatalk 4
Any chance we get some p1c love
Sent from my SCH-I800 using xda premium
Nicklag said:
Any chance we get some p1c love
Sent from my SCH-I800 using xda premium
Click to expand...
Click to collapse
I don't remember where, but at some point it was advised that CM10.0 and subsequent ROMS are the same for P1000, P1000L and P1000C.
@cdesai, can you please correct me if wrong?
Thank you, Desai!!! It looks decent! You are the great coder.
When push the power button, the screen always switches to landscape from portrait (or
vice versa) before it goes off. And lockscreen is always portrait.
Yue_Iohikzu said:
I don't remember where, but at some point it was advised that CM10.0 and subsequent ROMS are the same for P1000, P1000L and P1000C.
@cdesai, can you please correct me if wrong?
Click to expand...
Click to collapse
P1000, P1000L and P1000N - the C version is a different beast.
Mjoelnir77 said:
P1000, P1000L and P1000N - the C version is a different beast.
Click to expand...
Click to collapse
I just verified, indeed it is a device for a different region.
Thank for the heads up.
Most likely the only requirements are the drivers for the region specific hardware, besides that it should be the same.
Hi!
First of all, thanks for this great new rom. Its feel like faster than 10.1 (maybe because of the factory reset)
My only problem i cant take PicSphere photos with Focal. The logcat is attached.
Thanks again!
As far as I know Focal is still in a very early stage. It has bugs on every 10.2 rom.
Sent from my GT-P1000 using xda app-developers app
cdesai is always the earliest bird My question is how to enable root permission, I think this is critical to all fans!
bravokylee said:
cdesai is always the earliest bird My question is how to enable root permission, I think this is critical to all fans!
Click to expand...
Click to collapse
Go to Setting -> About tablet -> Click 7 times on Build Number to enable developer options, then set Root access there...
bravokylee said:
cdesai is always the earliest bird My question is how to enable root permission, I think this is critical to all fans!
Click to expand...
Click to collapse
Try to flash superSU 1.5.1
send from my Nexus
Installed this in my P1000. Working fine. Flashed this over 4.2.2 by alroger's and then flashed gapps for 4.3. Awesome. Thanks for the developer.
Sent from my GT-P1000 using xda premium
I can't connect to home WiFi network, even after several attempts it still reports only:
The problem with the verification
Thanks in advance for any help
Wiped Dalvik and formatted cache and system and then installed that directly over the Alroger from 10th of August with the march gapps (there are newer ones - loading them now). Everything works and no bugs so far (only missing the tweaks from the alroger rom).
You only get root after becoming a delevoper like described above. But it works then without any third party stuff or any problems.
Wow! Just installed this to test for the weekend, but I don't think I have to go back I also flashed over alrogers last build (full wipe), and it's working very stable ever since. What is experimental about it?
Just one question, what governor and scheduler do you prefer cdesai (or others)? Is the standard on demand and row advisable, because it's pre-configured like that, or is that a misunderstanding?
TRIM Support?
Hi, Thanks for this. Does anyone know if TRIM Support is enabled in this version? Does it help out?
Thanks.
why not p1c?looking forward.....
polycentric said:
why not p1c?looking forward.....
Click to expand...
Click to collapse
+1 , If I'm not interested in connecting it to the Sprint CDMA network and only use it as a WiFi tablet is it OK to use the GSM ROM anyway if i only use the wifi? I always wondered that.
If by "bootup screen looks weird for a few seconds" you mean that the Cyanogenmod logo is stretched horizontally and you can only see the word "Cyanogen", I've been having that since I first flashed CM10, even the stable builds.
As for the ROM itself, it's nice and fast, but battery life is a *****. I know it'll get better, of course, so I'll just stick with this.
Code:
*** Disclaimer by cdesai
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Introduction
Here goes my CM10.2 contribution to the good old Galaxy Tab 7". This is the ROM that I'm using and sharing with yout guys. It's based on the CyanogenMod ROM, with sgt7 repo goodies, sbradymobile's Trebuchet and Settings, OpenPDroid Patches to enable the use of the PDroid Manager Privacy App and hopefully humberos' kernel and TWRP Touch Recovery.
SGT7 Tabs - P1000, P1000N/L
CDMA - sorry, no prospect for now. Anyone able to help out there?
Click to expand...
Click to collapse
Features
Works: Everything except frontal pictures?
Click to expand...
Click to collapse
Installation instructions
Regular flash through CwM or TWRP Recovery:
Backup everything up!
Wipe/Factory Reset
Flash CM10.2 ROM.
Flash PDroid Patches (optional).
Flash GApps (optional).
Reboot.
Click to expand...
Click to collapse
Changelog
[20131104 ROM] with Kernel 3.0.101-HumberOS-v1.52
[20131103 ROM] My first good one. working good for me!
CwM Recovery, CM kernel, OpenPDroid optional ZIP...
Click to expand...
Click to collapse
Downloads
ROM, PDroid Patchs, separate kernel ZIPs, etc...
Alroger's Cafe-TI Download Page
Sources
https://github.com/CyanogenMod
https://github.com/sgt7
https://github.com/storm31
https://github.com/humberos
FAQ
The FAQ section in a thread is bound to grow over time... check for updates.
Q: How do I flash?
A: Learn that before coming here.
Q: How do I restore my {fill in here} ROM?
A: Learn that before coming here.
Q: How do I use ODIN?
A: Learn that before coming here.
Q: How do I use Heimdall?
A: Learn that before coming here.
Click to expand...
Click to collapse
Links and References
PDroid Manager Security App in the Play Store.
GApps (use the correct one, for Android 4.3.x / CM10.2.x only!)
storm31's experimental thread.
Click to expand...
Click to collapse
Troubleshooting
Mobile, Data, 3G problems? This ROM comes with the JPZ modem. You might need to flash your customary modem back. Just copy your modem.bin to /radio in the Tab.
Wrong MAC? Wrong IMEI? Try restoring files from /sdcard/backup/efs*/* to /efs/. If you don’t have a backup, then start over with FULL Restock, and next time save your backup/efs folders, which are created everytime you install CM10.1.
Market problems? Clear Google Services Framework data and reboot.
Multiple users is NOT supported by the OpenPDroid Patches.
Developer options: can’t find it? It’s hidden! Tap About tablet / Build number 7 times to unlock it.
No touch? That means you got the wrong kernel installed. A couple of builds had problems identifying the exact model. Just flash your kernel through recovery or heimdall / odin.
No boot? Stuck at the SAMSUNG logo? Flash the correct kernel using Download Mode using heimdall!
Deep Sleep not kicking in? Try wiping cLock’s data or freezing / removing it (com.cyanogenmod.lockclock).
Click to expand...
Click to collapse
Thanks To/Credits
* humberos
* cdesai
* sbradymobile
* storm31
everyone involved! CyanogenMod peeps, TWRP peeps, Linux peeps, OpenSource peeps, Android peeps, XDA peeps...
Dev-Host Downloads and Ads
Please notice that Dev-Host has some really nasty snicky intrusive Ads in their download pages. DO NOT BE FOOLED! There is only one REAL download LINK, and it DOES NOT REQUIRE YOU TO WAIT, INSTALL, VISIT OR DO ANYTHING. And it's usually the smallest most discrete button of them all.
Check out the image bellow and be carefull with all the ads around the real download button. They might float around and trick you into clicking them.
I'm sorry for any inconvenience that might have caused. I've never even noticed that was happening because I use a HOSTS mod for blocking those nasty ads and sugggest that everyone do too. Check it out in this site: Blocking unwanted connections
reserve 3
I've got a cdma gtab and the resources to put up a build environment for it. I suck as a developer though, but would love 10.2 on my old tab so I'll take a crack at it if I can bug ppl here for help.
UPDATE 20131104 - kernel humberos v1.52
[20131104 ROM] with Kernel 3.0.101-HumberOS-v1.52
Thanks @storm31 for your repo / manifest!
Hi alroger I am running your 4.2.2 version 10.1, without having any problem at all
I don't know if this one has any bugs, Is it possibe to update to this one only by just clearing cache and davlik cache through TWRP and after that to install the Rom , OpenPdroid and Gapps? I have to install all from scratch?
By the way the link for Gapps for 10.2 is not working page opens but is not downloading , I had already downloaded the rom and OpenPdroid
I have a full backup using TWRP to restore if I have any serius probems.
Thanks in advance and for the efford
papatzis said:
Hi alroger I am running your 4.2.2 version 10.1, without having any problem at all
I don't know if this one has any bugs, Is it possibe to update to this one only by just clearing cache and davlik cache through TWRP and after that to install the Rom , OpenPdroid and Gapps? I have to install all from scratch?
By the way the link for Gapps for 10.2 is not working page opens but is not downloading , I had already downloaded the rom and OpenPdroid
I have a full backup using TWRP to restore if I have any serius probems.
Thanks in advance and for the efford
Click to expand...
Click to collapse
No, can't keep your configs between major CM versions... you can try, but usually ends up in bad results. I recomend factory reset / wipe and restore your apps and data using something like Titanium Backup, but NOT the system settings.
Yeah, gapps seems to be having temporary problems right now... how about this temp link for you guys in UbuntuOne: gapps-jb-20130813-signed.zip
subscribed
Sent from my GT-I9500
Hi
I just installed the rom and thank you very much it's better than official cm 10.1 for me
But also I found some more issues
- boot logo is still weird on startup
- seLinux does not enable, just freeze when click ok
- unable to reset data with sdcard erase, just rebooting and system is the same. clean data from cwm works ok
regards
Unable to setup restricted account. Crash when press setup icon from main user account
Sent from my GT-P1000 using XDA Premium 4 mobile app
"dirty" flashed (wipe of system, boot, cache and dalvik only) coming from storm31's 20th release and no apparent problems so far
Back camera does not suitable for videoconferencing. Got a lot garbage in preview overlay in Trueconf videoconferencing software. Front camera preview works ok, never got this bug in stock
---------- Post added at 06:48 PM ---------- Previous post was at 06:43 PM ----------
The same result in HighSpeed Cam+ preview works only for 1024x600 and 800x600 other settings are garbage
i have an old cdma tab that i just use for wifi no data plan connected anymore. Could you hook me up with a download that might work or point me on how to build my own. I got a build environment setup already and building roms for my lg optimus g
Dmaxx67 said:
i have an old cdma tab that i just use for wifi no data plan connected anymore. Could you hook me up with a download that might work or point me on how to build my own. I got a build environment setup already and building roms for my lg optimus g
Click to expand...
Click to collapse
All my build tips in the CM10.1 thread. Not even a manifest to build cdma in cm10.2, or I would have shared. Feel free to test cm10.1 kernels with this ROM and share the results!
Thanks alroger for this. Will test it out soon :thumbup:
Sent from my GT-I9505G using Tapatalk 4
Firstly big thank alroger cdesai humberos koxudaxi et all, this build 20131104 has 487mb only, but on normal usage always available >100mb, hence response reactipon is really great. OC 1.4Ghz also stable, unlike 4.2 only manages 1.2Ghz.
Ok, possible bug report, bluetooth headset doesn't seem to be working with skype and oovoo, how to get logcat again! Thanks.
Can't detect headset device unless turn on DUT first then start BT in android. Inconclusive bcos only tried 1 DUT.
Sent from my GT-P1000 using xda app-developers app
Hi!
Thanks Alroger for keeping delivering to our old tabs
Came from Alrogers 4.2.2 date 10 aug.
Wiped and flashed.
Everything works great, also both cameras.
Only fc on browser so using chrome, and message app missing so im using Handcent.
Sent from my GT-P1000 using Tapatalk 2
How's video playback going on this one? That's a biggie for me, and has seen me take a little longer to move to each new version. I stream or store on an sd card, mp4's etc up to 1080p of about 1.5g and on 4.2.2 with mx player they are pretty much perfect.
I can certainly say that you guys have been beyond outstanding in keeping our tab relevant. Every time I think it's time to upgrade, it just works well enough (a bit slower I know, but still works) to keep my money in my pocket. My bank balance thanks you all!
goughymachine said:
How's video playback going on this one? That's a biggie for me, and has seen me take a little longer to move to each new version. I stream or store on an sd card, mp4's etc up to 1080p of about 1.5g and on 4.2.2 with mx player they are pretty much perfect.
I can certainly say that you guys have been beyond outstanding in keeping our tab relevant. Every time I think it's time to upgrade, it just works well enough (a bit slower I know, but still works) to keep my money in my pocket. My bank balance thanks you all!
Click to expand...
Click to collapse
Video playback is smooth for me so far on this ROM
Sent from my GT-I9505G using Tapatalk 4
alroger said:
Please notice that Dev-Host has some really nasty snicky intrusive Ads in their download pages. DO NOT BE FOOLED! There is only one REAL download LINK, and it DOES NOT REQUIRE YOU TO WAIT, INSTALL, VISIT OR DO ANYTHING. And it's usually the smallest most discrete button of them all.
Check out the image bellow and be carefull with all the ads around the real download button. They might float and trick you into clicking them.
I'm sorry for any inconvenience that might have caused. I never even knew that was happening because I use a HOSTS mod for blocking those nasty ads and sugggest that everyone do too. Check it out in this site: Blocking unwanted connections
Click to expand...
Click to collapse
Quoting post #2. Check the image attached there.
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4 (KK), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
INSTRUCTIONS
First time installing CyanogenMod 11.0 to your Galaxy Note 10.1 I925, or coming from another ROM:
- Read known issues ans FAQs
- Flash the latest official ClockworkMod-Recovery
- Copy GApps and CM11.0 ZIPs to your SDCard
- Boot into Recovery
- Flash CM11.0 zip from SDCard
- Flash GApps zip from SDCard
- DO A DATA WIPE / FACTORY RESET (otherwise your device will be stuck at boot)
- Reboot
- Don't restore system data using Titanium Backup!
- Restoring Apps + Data might cause problems and is not recommended, avoid it if possible!
Upgrading from earlier version of CyanogenMod 11.0:
- Copy CM11.0 ZIP to your SDCard
- Boot into Recovery
- Flash CM11.0 zip from SDCard
- Reboot
BUG LIST
-BT Voice Search
[Nightlies] http://download.cyanogenmod.org/?device=i925
[GAPPS 4.4] http://wiki.cyanogenmod.org/w/Google_Apps#Downloads
Cool! Is this rom good for daily use? Are those the only issues present?
Edit: Just noticed which device this is for... No GT-N8010?
Ultra9k said:
Cool! Is this rom good for daily use? Are those the only issues present?
Edit: Just noticed which device this is for... No GT-N8010?
Click to expand...
Click to collapse
I925 P4noteltevzw, sorry I don't have a N8010 to test with
GAPPS 4.4 link is dead. I tried to install the rom on my I925 and it fails. I have CM10.2 currently on there.
twrp
error executing updater binary in zip
tauntt said:
GAPPS 4.4 link is dead. I tried to install the rom on my I925 and it fails. I have CM10.2 currently on there.
twrp
error executing updater binary in zip
Click to expand...
Click to collapse
Need to use CWM, the lastest version available.
Updated OP with gapps
Stupid question... Is there a way to install cwm on a SCH-I925? If I search for cwm and SCH-I925 I find nothing.
Unfortunately
Unfortunately, it doesnt work on the N8000. I would gladly test it. But it doesnt even detect the file. Same deal goes with the Gapps.
Legendhidde said:
Unfortunately, it doesnt work on the N8000. I would gladly test it. But it doesnt even detect the file. Same deal goes with the Gapps.
Click to expand...
Click to collapse
If I get time I will look at making this, but it will be a few days before I even look at it.
No worries, I have all the time. No haste. If you do, I would gladly become the first tester.
Any screen shots please?
Sent from my GT-N8000 using xda app-developers app
goldengun67 said:
Any screen shots please?
Sent from my GT-N8000 using xda app-developers app
Click to expand...
Click to collapse
+1
Envoyé depuis mon SM-N9005 avec Tapatalk
This may be a really dumb question, and sorry if I overlooked something, but why is this posted in the Note 10.1 development if it's for the I925?
nerdyblonde said:
This may be a really dumb question, and sorry if I overlooked something, but why is this posted in the Note 10.1 development if it's for the I925?
Click to expand...
Click to collapse
SCH-i925 is another name for the Galaxy Note 10.1 LTE version
sbrissen said:
If I get time I will look at making this, but it will be a few days before I even look at it.
Click to expand...
Click to collapse
that would be great!
©h®is said:
that would be great!
Click to expand...
Click to collapse
Yes, it would be interesting to take a look...
How did u get root on the 925 every root process I find is for the non Verizon versions and non lte
Sent from my SCH-I535 using xda app-developers app
GREGHARKINS said:
How did u get root on the 925 every root process I find is for the non Verizon versions and non lte
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Wrong thread for this question.
Hmm so if the Verizon note 10.1 gets official cm11 I'm sure and hopeful that the WiFi version n8013 should get official nightlies soon
sbrissen said:
If I get time I will look at making this, but it will be a few days before I even look at it.
Click to expand...
Click to collapse
Any news about the N8000? I'm on OmniRom and we having a problem with the screen that goes white https://www.dropbox.com/s/f5r5ltdppw5iqsh/IMG_20131228_181900.jpg
I was wondering if you had the same problem with your rom since I believe the two tables share the same hardware.
If you need someone to test CM11 on a N8000 I'm available!
Sent from my GT_N8000