Develop Bugs

Froyo for the HTC Legend is here

stewie01 said:
Checking update for 2.05.161.1...
*** FOUND NEW VERSION 3.14.161.1 *** h**p://fotadl.htc.com/OTA_Legend_Froyo_S_Vodafone_UK_3.14.161.1-2.05.161.1_R_release_135177_156984u2k321537x1cpy3d.zip
Checking update for 2.05.163.1...
*** FOUND NEW VERSION 3.14.163.1 *** h**p://fotadl.htc.com/OTA_Legend_Froyo_S_Vodafone_FR_3.14.163.1-2.05.163.1_R_release_135178_156976z7st0ojsytxcijbe.zip
Checking update for 2.05.177.2...
*** FOUND NEW VERSION 3.14.177.1 *** h**p://fotadl.htc.com/OTA_Legend_Froyo_S_Vodafone_AT_GER_Mobilkom_3.14.177.1-2.05.177.2_release_136766_156979h6vst6mdtj4013sm.zip
Click to expand...
Click to collapse
Here are the different versions of Froyo for the HTC Legend - perhaps a Dev can make something out of it

posted in wrong section

Not so wrong ))))
We need it to create the best FROYO rom for HERO....
Perdita2000
^^
m-o-m
~~~~

why is that? we've been waiting for the legend froyo so we can get a better port for the Hero.

my hero is waiting, anxiously, his new sense rom

Yeeesss...come on developers , I can't wait for new froyo sense rom ...GOOD LUCK!!

good find! i'll wait a few days before wearing out my F5 key...

first link dont work anyone have a mirror for the uk one?

link it's ok. Look at lats caracter, before .zip, there are blank space.

ninpo
we need you

System dump,found at 4PDA forum!
http://www.4shared.com/get/ti74Iuwc/dump.html
http://sendfile.su/210521

Ganii said:
System dump,found at 4PDA forum!
http://www.4shared.com/get/ti74Iuwc/dump.html
http://sendfile.su/210521
Click to expand...
Click to collapse
yes!!! thanks!
hope to make a good port

i am waiting for

That`s from "build.prop"
Code:
ro.ril.ecc.VODA-UK=112,911,999
ro.ril.def.agps.mode.VODAP001=1
ro.ril.def.agps.mode.VODAP102=1
ro.ril.def.agps.mode.VODAPE17=1
ro.ril.def.agps.mode.VODAP304=1
ro.ril.enable.a52=0
ro.ril.enable.a53=1
ro.ril.hsdpa.category=8
ro.ril.hsupa.category=5
ro.ril.hsxpa=2
ro.ril.radio.svn=2
ro.ril.disable.fd.plmn.prefix=23402,23410,23411
ro.ril.enable.sdr=0
# begin build properties
# autogenerated by buildinfo.sh
ro.com.google.clientidbase=android-vf-{country}
ro.com.google.clientidbase=android-vf-{country}
ro.build.id=FRF91
ro.build.display.id=FRF91
ro.build.version.incremental=282424
ro.build.version.sdk=8
ro.build.version.codename=REL
ro.build.version.release=2.2
ro.build.date=四 11月 4 22:34:26 CST 2010
ro.build.date.utc=1288881266
ro.build.type=user
ro.build.user=
ro.build.host=AA107
ro.build.tags=release-keys
ro.product.model=HTC Legend
ro.product.brand=vodafone_uk
ro.product.name=htc_legend
ro.product.device=legend
ro.product.board=legend
ro.product.cpu.abi=armeabi
ro.product.manufacturer=HTC
ro.product.locale.language=mdpi
ro.product.locale.region=
ro.wifi.channels=
ro.board.platform=msm7k
# ro.build.product is obsolete; use ro.product.device
ro.build.product=legend
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=3.14.161.1 CL282424 release-keys
ro.build.description=3.14.161.1 CL282424 release-keys
ro.build.changelist=282424
ro.product.ua=
ro.build.fingerprint=vodafone_uk/htc_legend/legend/legend:2.2/FRF91/282424:user/release-keys
ro.build.project=156984
ro.product.version=3.14.161.1
keyguard.no_require_sim=1
# end build properties
#
# system.prop for legend
#
rild.libpath=/system/lib/libhtc_ril.so
# Modify MMS APN retry timer from 5s to 2s.
ro.gsm.2nd_data_retry_config = max_retries=3, 2000, 2000, 2000
wifi.interface = tiwlan0
# Time between scans in seconds. Keep it high to minimize battery drain.
# This only affects the case in which there are remembered access points,
# but none are in range.
wifi.supplicant_scan_interval = 15
# Soft AP interface definition
softap.interface = tiap0
hostapd.status = unloaded
# density in DPI of the LCD of this board. This is used to scale the UI
# appropriately. If this property is not defined, the default value is 160 dpi.
ro.sf.lcd_density = 160
#0 - mdp composition, 1 - gpu composition
ro.sf.hw=1
# The OpenGL ES API level that is natively supported by this device.
# This is a 16.16 fixed point number
ro.opengles.version = 131072
# Default network type
# 0 => WCDMA Preferred.
ro.telephony.default_network = 0
# For the agps default value
ro.ril.def.agps.mode = 2
# For 7227 projects ,default enable AMR-Wideband ([email protected]: WSD request to disable it by default)
# ro.ril.enable.amr.wideband = 1
# For emmc phone storage
ro.phone_storage = 0
#
# This file describes the media capabilities and profiles
# using system properties.
#
# Note: The property key and value has some length
# limit as defined by PROPERTY_KEY_MAX and
# PROPERTY_VALUE_MAX, respectively
#
# WARNING: We may not use system properties for specifying
# media capabilities and profiles in the future
#
ro.media.enc.file.format = 3gp,mp4
ro.media.enc.vid.codec = m4v,h263
ro.media.enc.vid.h263.width = 176,640
ro.media.enc.vid.h263.height = 144,480
ro.media.enc.vid.h263.bps = 64000,1600000
ro.media.enc.vid.h263.fps = 1,30
ro.media.enc.vid.m4v.width = 176,640
ro.media.enc.vid.m4v.height = 144,480
ro.media.enc.vid.m4v.bps = 64000,1600000
ro.media.enc.vid.m4v.fps = 1,30
# For FOTA setting (leave empty value to use default)
ro.htc.checkin.url = http://andchin.htc.com/android/checkin
ro.htc.checkin.crashurl = http://andchin.htc.com/android/crash
ro.htc.checkin.url_CN = http://andchin.htccomm.com.cn/android/checkin
ro.htc.checkin.crashurl_CN = http://andchin.htccomm.com.cn/android/crash
ro.htc.checkin.exmsg.url = http://fotamsg.htc.com/android/extra/
ro.htc.checkin.exmsg.url_CN = http://fotamsg.htccomm.com.cn/android/extra/
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.google.networklocation=1
ro.setupwizard.mode=DISABLED
ro.config.ringtone=Innovation.mp3
ro.config.notification_sound=Color.mp3
ro.config.alarm_alert=Light.mp3
ro.config.cal_notification=Vector.mp3
ro.config.msg_notification=Ascend.mp3
ro.setupwizard.mode=OPTIONAL
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
ro.com.google.clientidbase=android-vf-{country}
ro.ril.enable.managed.roaming=1
ro.setupwizard.mode=OPTIONAL
ro.com.google.gmsversion=2.2_r7
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt

So this means that soon I will have "original" Android 2.2 with HTC Sense UI on my Hero ?
Like:
youtu.be/VycV_QfDc8w
If so, go go devs xD

Hmm, it's going to be interesting to see whether the dev's pick stuff from the Legend ROM and stick them in the already out Gratia ROM, or just do a fresh build.

Dear devs,
Now It's your time to shine! Make all the Hero owners proud of their forgotten phone!

whats taking so long its been at least 12 hours since it hit the net why is it not ported yet lol ;-)

skedone said:
whats taking so long its been at least 12 hours since it hit the net why is it not ported yet lol ;-)
Click to expand...
Click to collapse
dude it is not that simple yet, this 2.2 legend is pretty different than other legends

Working on it.. hard one

downloading not compatible apps

Hi,
Its been complained about on couple of threads but im looking for some hope.
Im trying to get UBS Mobile Banking in Switzerland but its not compatible with SGS2 (due to my custom ROM, Root, who know why) This as many apps would most likely work if downloaded as apk and installed with e.g. rootexplorer.
Is there a way to trick the android market to get any apk from it ? Maybe some new generic account on google or else ?
Thanks

smartin said:
Hi,
Its been complained about on couple of threads but im looking for some hope.
Im trying to get UBS Mobile Banking in Switzerland but its not compatible with SGS2 (due to my custom ROM, Root, who know why) This as many apps would most likely work if downloaded as apk and installed with e.g. rootexplorer.
Is there a way to trick the android market to get any apk from it ? Maybe some new generic account on google or else ?
Thanks
Click to expand...
Click to collapse
have a play with this
https://market.android.com/details?id=ch.racic.android.marketenabler&hl=en

Tried that already,
I believe its not the network but more like some silly descriptor somewhere in phone identifier.
Weird thing. I did took another Androdid phone, downloaded the application from UBS but its not in system\app directory.
When in settings i try to copy it to SD card is says it is copy protected.
Sent from my GT-I9100 using XDA App

Guys,
Question to developers: how does market decide if an app is compatible our not ?
Some custom roms will see app on the market and some won't.
I did change the CSC to Swisscom and still nothing so its not that
Bests
Sent from my GT-I9100 using XDA App

Have you changed your dpi settings? Set it back to stock 240 and you should can download it...
Gesendet von meinem GT-I9100 mit Tapatalk

bgx,
my build.prop shows: ro.sf.lcd_density=240 so its not that
i start to think UBS Mobile banking is not compatible although comments on the market indicate it is.
My whole prop file
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=GINGERBREAD
ro.build.display.id=--VK-- Stable -XWKL1-[V3.2]-
ro.build.version.incremental=XWKL1
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=2.3.6
ro.build.date=Tue Dec 13 14:39:43 CET 2011
ro.build.date.utc=1323783583
ro.build.type=user
ro.build.user=root
ro.build.host=DELLBUILDER12
ro.build.tags=release-keys
ro.product.model=GT-I9100
ro.product.brand=samsung
ro.product.name=GT-I9100
ro.product.device=GT-I9100
ro.product.board=GT-I9100
ro.product.cpu.abi=armeabi-v7a
# Samsung Specific Properties
ro.build.PDA=I9100XWKL1
ro.build.hidden_ver=I9100XWKL1
ro.build.changelist=809037
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=samsung
ro.product.locale.language=vi
ro.product.locale.region=VN
ro.wifi.channels=
ro.board.platform=s5pc210
# ro.build.product is obsolete; use ro.product.device
ro.build.product=GT-I9100
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=GT-I9100-user 2.3.6 GINGERBREAD XWKL1 release-keys
ro.build.fingerprint=samsung/GT-I9100/GT-I9100:2.3.6/GINGERBREAD/XWKL1:user/release-keys
# Samsung Specific Properties
ro.build.PDA=I9100XWKL1
ro.build.hidden_ver=I9100XWKL1
ro.build.changelist=809037
ro.tether.denied=false
ro.flash.resolution=1080
# end build properties
#
# system.prop for asop5000
#
rild.libpath=/system/lib/libsec-ril.so
rild.libargs=-d /dev/ttyS0
ro.sf.lcd_density=240
dalvik.vm.heapsize=64m
# Samsung USB default mode
persist.service.usb.setting=0
dev.powersave_fps=0
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.google.locationfeatures=1
ro.com.google.clientidbase=android-samsung
ro.com.google.gmsversion=2.3_r8
media.stagefright.enable-player=false
media.stagefright.enable-meta=false
media.stagefright.enable-scan=false
media.stagefright.enable-http=true
media.stagefright.enable-rtsp=false
dev.sfbootcomplete=0
ro.com.google.clientidbase=android-samsung
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.google.locationfeatures=1
keyguard.no_require_sim=true
ro.config.ringtone=S_Over_the_horizon.ogg
ro.config.notification_sound=01_Sherbet.ogg
ro.config.alarm_alert=Good_Morning.ogg
ro.config.media_sound=Media_preview_Touch_the_light.ogg
ro.opengles.version=131072
ro.setupwizard.mode=OPTIONAL
ro.secdevenc=true
ro.wtldatapassword=true
ro.error.receiver.default=com.samsung.receiver.error
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.ril.enable.dtm=1
ro.ril.gprsclass=12
ro.ril.enable.3g.prefix=1
ro.ril.hsdpa.category=28
ro.ril.hsupa.category=9
ro.ril.hsxpa=3
ro.ril.hep=1
ro.ril.enable.a53=1
# pongsters special speed tweaks
windowsmgr.max_events_per_sec=150
wifi.supplicant_scan_interval=180
# Phone tweaks
ro.HOME_APP_ADJ=1
ro.media.enc.jpeg.quality=100
debug.sf.hw=1
ro.telephony.call_ring.delay=0
pm.sleep_mode=1
ro.ril.disable.power.collapse=0
persist.adb.notify=0
debug.performance.tuning=1
video.accelerate.hw=1
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
net.tcp.buffersize.default=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,16384,256960
ro.lge.proximity.delay=25
mot.proximity.delay=25
ro.config.hw_menu_unlockscreen=false
persist.sys.use_dithering=0
persist.sys.purgeable_assets=1
dalvik.vm.dexopt-flags=m=y
ro.mot.eri.losalert.delay=1000
thanks

UBS Mobile App
I do not think it is our problem to install this app on devices we have. It is a problem of UBS which apparently can not deliver working product. I have complained/informed them already and would suggest to do the same.
W.

WiktorMk said:
I do not think it is our problem to install this app on devices we have. It is a problem of UBS which apparently can not deliver working product. I have complained/informed them already and would suggest to do the same.
W.
Click to expand...
Click to collapse
I did complain and i did get answer that is should work on SGS2.
I did in the meantime flashed back to stock rom (from VK) and i could
download and install the app.
Then i loaded Ultratoxic (as this is odin so could easily get custom rom and not go via installation of CWM).
UBS mobile app is also visible and can be loaded into it.
So I figure there are some parameters in VK rom and some others
that block this an perhaps other apps.
cheers

Anybody managed to get the APK for this ?
Can somebody share their APK file ?

why hasn't anyone shared the apk ?

smartin said:
Tried that already,
I believe its not the network but more like some silly descriptor somewhere in phone identifier.
Weird thing. I did took another Androdid phone, downloaded the application from UBS but its not in system\app directory.
When in settings i try to copy it to SD card is says it is copy protected.
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
since its not a systemapp you have to search for it in /data/app/, downloaded apps will be stored there.

KcDaRookie said:
since its not a systemapp you have to search for it in /data/app/, downloaded apps will be stored there.
Click to expand...
Click to collapse
Just use titanium backup then find the apk there.
Please post here!

Meanwhile I had a friend do it for me.
http://dl.dropbox.com/u/92090/UBS_Mobile_Banking_Titanium_Bakcup.zip
Unzip and place 3 files into the TitanuimBackup folder on your sdcard, then open Titanium backup and Restore.
Works on my GN

horadee said:
Meanwhile I had a friend do it for me.
http://dl.dropbox.com/u/92090/UBS_Mobile_Banking_Titanium_Bakcup.zip
Unzip and place 3 files into the TitanuimBackup folder on your sdcard, then open Titanium backup and Restore.
Works on my GN
Click to expand...
Click to collapse
how do you restore it from titatium ? it doesn't show on the list of app.

chance the build prop.to the right samsung names
i am sure its a build prop. problem... i have a china tablet and when i got it,it could not download anything from market not even facebook i therefor chance the build prop. to a galaxy tab name and now i can download all things to that tab...
so if you have custom rom((because the names in custom roms is not always right)) you wanna chance the build prop. with root explorer ect. to the proper names...SAMSUNG names just find a build prop. like that above and make your names the same. save it and root explorer makes a copy of your old prop. you can go back to if you want.. reboot your phone and now you can download all the normal apps for sgs2..
you can also if you want a game there is not compatibel with our samsungs sgs2..
chance it to whatever you like(htc sensation) install the game rewert back to your stock build prop. and play the game...
hope its usefull and sorry the english.. martin

[ROM]VALUE PACK! 2.3.6 GINGERBREAD XXJVU 3 File Odin

People who has donated, a HUGE THX!​
This is VALUE PACK!!!
http://www.sammobile.com/2012/01/06/seems-like-samsung-has-started-tweaking-their-galaxy-s/
I have repacked this fw to a 3 file for Odin. Enjoy!
I removed this from the rom, just example fotos vids, etc
Here it is if you want it.
http://www.multiupload.com/K73HD9JFU1
Also a CWM ROM http://forum.xda-developers.com/showthread.php?p=21108398#post21108398
Whats new :
Face Unlock
Galaxy Note Unlock Screen
Galaxy S2 Video Editor
You can take photo when recording video
Browser is faster
Ram usage a bit higher
Stock_XXJVU_Odin.Bl.zip <----LINK
Code:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=GINGERBREAD
ro.build.display.id=GINGERBREAD.XXJVU
ro.build.version.incremental=XXJVU
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=2.3.6
ro.build.date=Thu Dec 29 16:42:13 KST 2011
ro.build.date.utc=1325144533
ro.build.type=user
ro.build.user=se.infra
ro.build.host=SEI-22
ro.build.tags=release-keys
ro.product.model=GT-I9000
ro.product.brand=samsung
ro.product.name=GT-I9000
ro.product.device=GT-I9000
ro.product.board=GT-I9000
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=GB
ro.wifi.channels=
ro.board.platform=s5pc110
# ro.build.product is obsolete; use ro.product.device
ro.build.product=GT-I9000
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=GT-I9000-user 2.3.6 GINGERBREAD XXJVU release-keys
ro.build.fingerprint=samsung/GT-I9000/GT-I9000:2.3.6/GINGERBREAD/XXJVU:user/release-keys
# Samsung Specific Properties
ro.build.PDA=I9000XXJVU
ro.build.hidden_ver=I9000XXJVU
ro.build.changelist=851880
ro.flash.resolution=720
# end build properties
#
# system.prop for smdkc110
#
rild.libpath=/system/lib/libsec-ril.so
rild.libargs=-d /dev/ttyS0
ro.sf.lcd_density=240
dalvik.vm.heapsize=64m
ro.opengles.version=131072
# Samsung USB default mode
persist.service.usb.setting=0
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.opengles.version=131072
ro.config.ringtone=01_Minimal_tone.ogg
ro.config.notification_sound=01_Sherbet.ogg
ro.config.alarm_alert=Good_Morning.ogg
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.google.locationfeatures=1
ro.setupwizard.mode=DISABLED
ro.com.google.gmsversion=2.3_r7
wifi.interface=eth0
wifi.supplicant_scan_interval=15
ro.secdevenc=true
ro.error.receiver.default=com.samsung.receiver.error
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
ro.com.android.dataroaming=true
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
media.stagefright.enable-player=false
media.stagefright.enable-meta=false
media.stagefright.enable-scan=false
media.stagefright.enable-http=true
media.stagefright.enable-rtsp=false
dev.sfbootcomplete=0
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
Code:
PDA=XXJVU
MODEM=XXJVU
CSC=OXAJVU
I9000XXJVU build date = December 29 2011.
Android version = Android 2.3.6
Changelist: 851880
CREDIT:
Samsung
Google
BHuvan goyal for checking new stuff in the FW his thread here
Click to expand...
Click to collapse

thanx
downloading.....

So this is newer than JW1?
Any obvious differences?

djb77 said:
So this is newer than JW1?
Any obvious differences?
Click to expand...
Click to collapse
Name .....until no one flashes it , this is the only obvious difference. Lols.

Link is up
this is value pack!!!!!

download not working for me

Awesome !!!! trying now.

koooowweeee said:
download not working for me
Click to expand...
Click to collapse
works here

Hi Perka! So what's the changelog?! Sorry for being lazy and not flashing it cuz right now I have a decent set-up here...So...
1. Face unlock? 2. Browser? Any other change?

whats new on jvu except face unlock?

This is the value pack? The only news are the lockscreens and photo editor?
Good work Samsung!! -.-
Btw Samsung confirm that they not release nothing for Galaxy S finally...
Enviado desde mi Alcatel One Touch

Im updating OP as we find new stuff

Guys update - better camera quality. And faster snapping of pics.

This is never the Value Pack.
The Value Pack should based on Android 4
and not on Gingerbread.

PrimeDeluxe said:
This is never the Value Pack.
The Value Pack should based on Android 4
and not on Gingerbread.
Click to expand...
Click to collapse
No. Samsung confirmed that it would Ginger.
Enviado desde mi Alcatel One Touch

PrimeDeluxe said:
This is never the Value Pack.
The Value Pack should based on Android 4
and not on Gingerbread.
Click to expand...
Click to collapse
ok so its not lol, what is it then?

What the hell is going on? Samsung said there wouldn't be a value pack so how on earth does this rom exist?

Perka said:
ok so its not lol, what is it then?
Click to expand...
Click to collapse
Samsung accidentally added this face unlock and new libs and tons of new features. There mistake.....maybe there employees were too drunk.....u never know.

It´s a Stock Rom = General Section not Development
and http://www.xda-developers.com/andro...ing-value-pack-instead-of-ice-cream-sandwich/

cspiby said:
What the hell is going on? Samsung said there wouldn't be a value pack so how on earth does this rom exist?
Click to expand...
Click to collapse
Hmmm.....maybe they made it......then because of some bug they cancelled it. I hope we find that bug and eliminate it.

[Q] Problem with GPS with android revolution HD

After i installed my ARHD on my DHD i have problems with GPS. It's not as accurate as it was with stock ROM, please help !

I've had my DHD for less than a year and also started getting gps issues (long time to fix, low accuracy, only 3 to 4 sats). After trying many roms and many software hacks (gps.conf to gps-status etc.) I started looking at hardware. I noticed that the connections in my gps-antenna cover were wearing out. I ordered a new gps-antenna and replaced it and now it works great again.
Check the post in my sig for a video how to change the gps-antenna (not my video)

we don't have the same problem, when i'm at home my gps shows that i'm in completely different city, but when i'm in the citymall for example it shows correctly...

GPS problem
Hi wrooney, you're not using Google maps 6.03 are you? Coz I had real problems with that and ARHD almost impossible to get a fix. They have updated maps to 6.10 now and that's working fine in my DHD with ARHD 6.31.

i have Maps version 6.0.1 and android revolution HD 6.3.1, now what should i do? somehow manually update maps?

Have you tried AGPS?
http://forum.xda-developers.com/showthread.php?t=1252011
I've been getting upwards of 8 sats and consistency connecting and locking on very quickly. I don't "activate" my GPS until I'm outside or in my car. It seems that helps a ton. I always open up GPS Toolbox before I route as well, so it can download some daily data.

Because at home you can't get GPS
Except if you leave in a tent of course...
Your phone is using 3 localization info: Wifi, GPS and cell towers.
I had exactly the same problem with Celcom in MY.
At home, perfect cell localization.
But in my office I was 50km away.
Wrong configuration of the tower.
To be sure, activate only one of the 3 (WiFi, GPS or data). I think switch of wifi and data as I bet on tower pb. You can also modify this in 'localization config'
Edit: in China, sometime the phone says it's locked on GPS but it put me at more than 50km away.
To solve it I activate data before launching Maps.
As stated before, GPS Status is a good to tool to check the GPS lock. Don't mess to much with pseudo soft to improve GPS... for me it's bul**t.
Good config of gps.conf is enough.
i post them for you as an example. But you have to adapt it for your country, this one is for China.

my gps.conf (zipped for upload)

but you don't get my problem my gps was working perfectly until i installed ARHD

I get your problem... but are you sure you kept the exact same config after flash?
Before I flash a ROM I always replace gps.conf in the zip by the one I attached for ex. I do the same with Maps.apk.
Are you sure that the config of localisation has not been modified between your previous ROM and this one? Are you sure to use the same version of the soft you're using for GPS? Same config of A-GPS.
By flashing the ROM you didn't change the HW and the radio. So the GPS reception has to be the same, only the way data is used is different now.
And last but not least... I can be wrong also. It's just my ideas and problems I encountered.

i don't know how to change the gps.conf, but i would like to try upg maps to lates version first than trying other methods, do you know how can i do that?

Thanks man the GPS.config file fixed my GPS problem
Sent from my Desire HD using xda premium

GPS probs
Attached a copy of Google maps 6.10. And GPS status which should help with fix speed.

i installed google maps and gpsstatus, but still innacuratte... :S

wrooney10 said:
i don't know how to change the gps.conf, but i would like to try upg maps to lates version first than trying other methods, do you know how can i do that?
Click to expand...
Click to collapse
Sorry.. to change gps.conf, just use rootexplorer (or equivalent) and replace the one you have in /system/etc/ (copy paste).
To upgrade maps is more tricky. On some ROM I can't... that's why I replace it before flashing (open the zip with 7zip and replace maps.apk in /system/apps/ with the one you want).
As I get use to it, I always replace these two files in a zip before flashing a rom (+delete apks I don't want, remove all ringtones and notif sounds...). It's easier to tune the zip than doing one by one on the phone.

i have the same problems with the RCMix3d Runny v4.0 i also used the patch of iBotPeaches but it dosen't work. i check the build.prop file and thereisn't anything about the gps, it's normal?
this is my build.prop file, it's normal? i need to write something?
#Edited by JSLEnterprises for RCMIX
ro.ril.ecc.VODA-Africa-South=112,999,911
ro.ril.ecc.HTC-GCC=999,112,997
ro.ril.ecc.HTC-ELL=92,93,94
ro.ril.ecc.HTC-WWE=999
ro.ril.ecc.HTC-Dutch=112
ro.ril.ecc.HTC-FRA=112,911
ro.ril.ecc.HTC-ITA=112,911
ro.ril.ecc.HTC-EastEurope=911
ro.ril.enable.a52.HTC-ITA=1
ro.ril.enable.a53.HTC-ITA=1
ro.ril.enable.amr.wb.HTC__A07=1
ro.phone.min_match.HTC__Y13=7
ro.ril.enable.amr.wb.HTC__Y13=1
ro.ril.enable.amr.wb.HTC__E11=1
ro.ril.enable.amr.wb.HTC__001=1
ro.phone.min_match.HTC__J15=7
ro.phone.min_match.HTC__016=7
ro.ril.enable.a52=0
ro.ril.enable.a53=1
ro.ril.disable.fd.plmn.prefix=23402,23410,23411,23420
ro.ril.enable.sdr=1
ro.ril.enable.amr.wideband=1
ro.com.google.clientidbase=android-htc-rev
ro.ril.vmail.23415=1571,BT
ro.ril.vmail.27203=171
ro.ril.vmail.65502=181
ro.ril.vmail.27211=171
ro.config.htc.enableCOTA=1
# begin build properties
# autogenerated by buildinfo.sh
ro.aa.customizationid=253838
ro.aa.project=Runnymede
ro.aa.romver=1.05.401.4
ro.aa.maincid=HTC__001
ro.aa.cidlist=HTC__001,HTC__E11,HTC__203,HTC__102,HTC__405,HTC__Y13,HTC__A07,HTC__304,HTC__032,HTC__N34,HTC__J15,HTC__016
ro.aa.skulist=401
ro.aa.rid=313
ro.aa.modelid=PD9810000
ro.build.changelist=185058
ro.aa.taskid=221900
ro.aa.mainsku=401
ro.cwkey=HTC__001
ro.com.google.clientidbase=android-htc
ro.aa.customizationid=253838
ro.build.id=GRJ90
ro.build.display.id=GRJ90
ro.build.version.incremental=182513.4
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=2.3.5
ro.build.date=三 10月 19 12:08:18 CST 2011
ro.build.date.utc=1318997298
ro.build.type=user
ro.build.user=
ro.build.host=ABM012
ro.build.tags=release-keys
ro.product.model=Desire HD
ro.product.brand=htc_wwe
ro.product.name=htc_ace
ro.product.device=ace
ro.product.board=spade
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=HTC
ro.product.locale.language=hdpi
ro.product.locale.region=
ro.wifi.channels=
ro.board.platform=msm7x30
# ro.build.product is obsolete; use ro.product.device
ro.build.product=runnymede
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=1.05.401.4 CL185058 release-keys
ro.product.ua=
ro.build.fingerprint=htc_europe/htc_runnymede/runnymede:2.3.5/GRJ90/182513.4:user/release-keys
ro.build.project=Runnymede:221900
ro.product.version=RCMix3D Runny v4.0
ro.build.languageremove=0
ro.build.sense.version=3.5
keyguard.no_require_sim=1
# end build properties
#
# system.prop for mahimahi
#
ro.sf.lcd_density=240
debug.fb.rgb565 = 0
# Use GPU for rendering UI
debug.sf.hw=1
rild.libpath=/system/lib/libhtc_ril.so
# Modify MMS APN retry timer from 5s to 2s.
ro.gsm.2nd_data_retry_config = max_retries=3, 2000, 2000, 2000
# ace RF team request
ro.ril.enable.dtm = 1
ro.ril.gprsclass = 12
ro.ril.hsdpa.category = 10
ro.ril.hsupa.category = 6
ro.ril.hsxpa = 2
# Default network type.
# 0 => WCDMA mode preferred.
ro.telephony.default_network = 0
#
# system props for the data modules
#
ro.use_data_netmgrd=true
persist.data_netmgrd_nint=8
wifi.interface=eth0
wifi.supplicant_scan_interval=30
# The OpenGL ES API level that is natively supported by this device.
# This is a 16.16 fixed point number
ro.opengles.version = 131072
# This is a high density device with more memory, so larger vm heaps for it.
dalvik.vm.heapsize=32m
# For the default value of agps
ro.ril.def.agps.mode = 1
# For HSDPA low throughput
ro.ril.disable.power.collapse = 1
# For FOTA setting (leave empty value to use default)
ro.htc.checkin.url = i can't post the url, if you need it write me a pm
ro.htc.checkin.crashurl = i can't post the url, if you need it write me a pm
ro.htc.checkin.url_CN = i can't post the url, if you need it write me a pm
ro.htc.checkin.crashurl_CN = i can't post the url, if you need it write me a pm
ro.htc.checkin.exmsg.url = i can't post the url, if you need it write me a pm
ro.htc.checkin.exmsg.url_CN = i can't post the url, if you need it write me a pm
ro.htc.appupdate.url = i can't post the url, if you need it write me a pm
ro.htc.appupdate.url_CN = i can't post the url, if you need it write me a pm
ro.htc.appupdate.exmsg.url = i can't post the url, if you need it write me a pm
ro.htc.appupdate.exmsg.url_CN = i can't post the url, if you need it write me a pm
# Release Bluetooth HW/SW information
ro.bt.chipset = Broadcom BCM4329-B1
ro.bt.stack = Broadcom BTL-A
ro.bt.stack.version = 2.0.50.032
#0x10000010010100100000011 represent bt profile list
ro.bt.profiles = 4270339
# enable data roaming
ro.com.android.dataroaming = true
# Properties of BTLA stack
service.brcm.bt.activation = 0
service.brcm.bt.srv_active = 0
service.brcm.bt.hcid_active = 0
service.brcm.bt.btld = 0
service.brcm.bt.btld_pid = 0
service.brcm.bt.avrcp_pass_thru = 0
service.brcm.bt.avrcp_toggle = 1
service.brcm.bt.local_name =
# For quick boot mode
persist.sys.shutdown.mode = hibernate
# Vivo China NEL use
ro.ril.update.vivo.acoustic = 1
# Properties of Scalado Denoise param.
postprocess.iso_midband = 400
postprocess.denoise_level = 5
# Following property will be reference by Settings.
ro.product.processor= 1GHz Qualcomm Snapdragon 8255
ro.product.ram= 768MB
ro.product.display_resolution= 4.3" WVGA Screen
ro.product.main_camera= 8 Megapixel
ro.product.front_camera= NA
ro.product.bluetooth= 3.0
ro.product.wifi = 802.11 B/G/N
# For opensense sdk
ro.htc.common.version = 2.1.0.0
# For ext4 file system
ro.ext4fs = 1
# Dump native call stack when an ANR happens to com.htc.launcher.
profiler.anr_dump_native_uid = 9999
# Enable egl profiler
debug.egl.profiler = 1
# Properties for supporting framework features
ro.htc.framework.screencapture = true
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.url.legal= i can't post the url, if you need it write me a pm
ro.url.legal.android_privacy= i can't post the url, if you need it write me a pm
ro.com.google.networklocation=1
ro.setupwizard.mode=DISABLED
ro.setupwizard.mode=OPTIONAL
ro.config.ringtone=QuietlyBrilliant.mp3
ro.config.notification_sound=Zeta.mp3
ro.config.alarm_alert=NewDay.mp3
ro.config.cal_notification=Epsilon.mp3
ro.config.msg_notification=Gamma.mp3
ro.setupwizard.mode=DISABLD
ro.com.google.gmsversion=2.3_r7
media.a1026.nsForVoiceRec=0
htc.audio.alt.enable=1
htc.audio.hac.enable=1
ro.setupwizard.enterprise_mode=1
dalvik.vm.lockprof.threshold=500
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
persist.adb.notify=0
windowsmgr.max_events_per_sec=120
ro.rommanager.developerid=capychimp
ro.modversion=RCMix3D Runny 4.0
Click to expand...
Click to collapse

swazii said:
Thanks man the GPS.config file fixed my GPS problem
Sent from my Desire HD using xda premium
Click to expand...
Click to collapse
Did you modify the conf in any way with your country and continent or did you leave it the way it was?

[ROM][PORT][P905][UNOFFICIAL] CyanogenMod 11

I'm not responsible for any damage to your device of any sort.
By flashing this you take responsibility of anything that happens.
Process at your own risk!
This is first draft version, I'm not able to check it myself (I have P900 only). This is port - it's based on http://forum.xda-developers.com/showthread.php?t=2786899
Please somebody check firmware, hope it will run and we will move step by step to make it fully working. If it will work - I'll make build from sources.
Known Issues
Expect mtp problem.
Instructions
1. Download the zip(s) - firmware and Google Apps additional package (optional)
2. Download and install a compatible recovery
3. Wipe data & cache partitions and flash firmware
4. Optional: install the Google Apps additional package
Links
CyanogenMod Port:
3: V2 - original boot.img for tests -should load, but will be set of problems like mount sdcard:
2: V1 - add correct dtb.img
1: V0 - bootloop
Google Apps additional package:
set of packages - full, mini, micro, nano: http://forum.xda-developers.com/showthread.php?t=2397942
TWRP
For P900 I use 2.8.1.1 (2.8.3.0 was problem) http://forum.xda-developers.com/showthread.php?t=2706982
Thanks
Thanks to CyanogenMod team and special thank to crpalmer, his hard work on fix all problems for original SM-T525 finally allow create the port for SM-P905.

Finally! What a christmas gift!

Great, finally some development for the P905 :fingers-crossed:
Tried on SM-P905M with twrp 2.8.0. and the rodpp stock kernel with setenforce enabled - permissive mode
Wiped data & cache, flashed the zip atached and gapps mini right away.
Not lucky, got stuck on the Galaxy note screen.
Can someone else test on the SM-P905 (without the M), and maybe with the stock kernel without modifications?

js345 said:
Great, finally some development for the P905 :fingers-crossed:
Tried on SM-P905M with twrp 2.8.0. and the rodpp stock kernel with setenforce enabled - permissive mode
Wiped data & cache, flashed the zip atached and gapps mini right away.
Not lucky, got stuck on the Galaxy note screen.
Can someone else test on the SM-P905 (without the M), and maybe with the stock kernel without modifications?
Click to expand...
Click to collapse
what version you use?

Valera1978 said:
what version you use?
Click to expand...
Click to collapse
my twrp is 2.8.0.0
and here's my build.prop:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=KOT49H
ro.build.display.id=KOT49H.P905MUBUAND1
ro.build.version.incremental=P905MUBUAND1
ro.build.version.sdk=19
ro.build.version.codename=REL
ro.build.version.release=4.4.2
ro.build.date=Mon Apr 7 20:55:04 KST 2014
ro.build.date.utc=1396871704
ro.build.type=user
ro.build.user=dpi
ro.build.host=SWDD3911
ro.build.tags=release-keys
ro.product.model=SM-P905
ro.product.brand=samsung
ro.product.name=viennaltexx
ro.product.device=viennaltexx
ro.product.board=universal5420
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=GB
ro.wifi.channels=
ro.board.platform=msm8974
# ro.build.product is obsolete; use ro.product.device
ro.build.product=viennalte
# Do not try to parse ro.build.description or .fingerprint
ro.build.characteristics=tablet
# Samsung Specific Properties
ro.build.PDA=P905MUBUAND1
ro.build.hidden_ver=P905MUBUAND1
ro.build.changelist=1253936
ro.product_ship=true
ro.chipname=MSM8974
ro.build.knox.container=
# end build properties
#
# from device/samsung/viennalte/system.prop
#
#
# system.prop for Vienna LTE. excerpted from MSM8974 qcom original system.prop
#
ro.sf.lcd_density=320
#
# system.prop for msm8974
#
rild.libpath=/system/lib/libsec-ril.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1
debug.sf.hw=1
debug.egl.hw=1
debug.composition.type=gpu
persist.hwc.mdpcomp.enable=true
debug.disable.bwc=1
debug.mdpcomp.logs=0
dalvik.vm.heapsize=36m
dev.pm.dyn_samplingrate=1
persist.demo.hdmirotationlock=false
ro.hdmi.enable=true
tunnel.decode=false
tunnel.audiovideo.decode=false
lpa.decode=false
lpa.use-stagefright=false
persist.speaker.prot.enable=false
#
# system props for the cne module
#
persist.cne.feature=0
#system props for the MM modules
media.stagefright.enable-player=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-fma2dp=true
media.stagefright.enable-scan=true
mmp.enable.3g2=true
media.aac_51_output_enabled=true
# RIL team modification
# netmgrd should be false in EVO-RIL model
ro.use_data_netmgrd=false
# RIL team modification
# qos will temporary false while supporting qos in EVO-RIL.
persist.data.netmgrd.qos.enable=false
#system props for time-services
persist.timed.enable=true
#
# system prop for opengles version
#
# 131072 is decimal for 0x20000 to report version 2
ro.opengles.version=196608
# System property for cabl
ro.qualcomm.cabl=1
#
# System props for telephony
# System prop to turn on CdmaLTEPhone always
telephony.lteOnCdmaDevice=0
# System proverty for sys info indication
persist.radio.add_power_save=1
# Keep SIM state on LPM mode
persist.radio.apm_sim_not_pwdn=1
#Simulate sdcard on /data/media
#
persist.fuse_sdcard=true
#
#snapdragon value add features
#
ro.qc.sdk.audio.ssr=false
##fluencetype can be "fluence" or "fluencepro" or "none"
ro.qc.sdk.audio.fluencetype=none
ro.qc.sdk.sensors.gestures=true
ro.qc.sdk.camera.facialproc=false
#property to enable user to access Google WFD settings.
persist.debug.wfd.enable=1
#property to choose between virtual/external wfd display
persist.sys.wfd.virtual=0
#SLook
ro.slook.ver=1
# System property for storage_preload
persist.sys.storage_preload=1
#
# ADDITIONAL_BUILD_PROPERTIES
#
dalvik.vm.heapstartsize=16m
dalvik.vm.heapgrowthlimit=192m
dalvik.vm.heapsize=512m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=2m
dalvik.vm.heapmaxfree=8m
persist.sys.logkit.ctrlcode=0
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
ro.carrier=unknown
ro.com.google.clientidbase=android-samsung
ro.vendor.extension_library=/vendor/lib/libqc-opt.so
persist.radio.apm_sim_not_pwdn=1
ro.build.scafe=latte
ro.build.scafe.size=grande
ro.build.scafe.shot=double
ro.hdcp2.rx=tz
media.enable-commonsource=true
ro.secwvk=144
ro.securestorage.support=false
security.mdpp=None
ro.security.mdpp.ver=1.0
ro.security.mdpp.release=2
security.mdpp.result=None
ro.sec.fle.encryption=true
ro.hwui.texture_cache_size=48
ro.hwui.layer_cache_size=32
ro.hwui.path_cache_size=8
ro.hwui.shape_cache_size=2
ro.hwui.gradient_cache_size=1
ro.hwui.drop_shadow_cache_size=4
ro.hwui.texture_cache_flush_rate=0.5
ro.hwui.text_small_cache_width=1024
ro.hwui.text_small_cache_height=512
ro.hwui.text_large_cache_width=2048
ro.hwui.text_large_cache_height=1024
ro.error.receiver.default=com.samsung.receiver.error
ro.config.ringtone=Over_the_horizon.ogg
ro.config.notification_sound=S_Whistle.ogg
ro.config.alarm_alert=Alarm_Morning_flower.ogg
ro.config.media_sound=Media_preview_Touch_the_light.ogg
ro.security.mdpp.ux=Enabled
ro.setupwizard.mode=DISABLED
ro.com.google.gmsversion=4.4.2_r1
persist.sys.dalvik.vm.lib=libdvm.so
ro.build.selinux=1
ro.kernel.qemu=0
ro.config.tima=1
ro.config.timaversion=2.0
ro.config.knox=1
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.qc.sdk.izat.premium_enabled=0
ro.qc.sdk.izat.service_mask=0x0
persist.gps.qc_nlp_in_use=0
ro.gps.agps_provider=1

js345 said:
Tried on SM-P905M with twrp 2.8.0. and the rodpp stock kernel with setenforce enabled - permissive mode
Click to expand...
Click to collapse
The rodpp kernel is for a TouchWiz stock ROM, it will not work with any AOSP based ROM.

CM11 V0= Boot Loop
V1= Freeze on Samsung Screen with SE warning in Top Left corner
V2= Freeze on Samsung Screen no Warning.
V3 pending

arcadia2uk said:
The rodpp kernel is for a TouchWiz stock ROM, it will not work with any AOSP based ROM.
Click to expand...
Click to collapse
I meant I had the rodpp kernel before flashing CM11, but i assumed that in the flashing process, a new kernel is flashed toghether, but i'm not sure about it.
Is that so? Or do I have to flash a new compatible kernel after flashing the CM11? Although i've tried to learn before, honestly i dont even fully understand what exactly is a kernel.

js345 said:
I meant I had the rodpp kernel before flashing CM11, but i assumed that in the flashing process, a new kernel is flashed toghether, but i'm not sure about it.
Is that so? Or do I have to flash a new compatible kernel after flashing the CM11? Although i've tried to learn before, honestly i dont even fully understand what exactly is a kernel.
Click to expand...
Click to collapse
First you need to make a backup of your current ROM and Data to the external SD, I also suggest separate Data partition, or a Titanium BU after this, as it will facilitate the re-installation of your favorite apps.
After this advanced wipe your; dalvik cache | cache | system | data | internal SD
The CyanogenMod ROM contain both system and kernel, no separate install is necessary
Since your Tab is freshly wiped, it doesn't matter what you had before.

First, thanks so much for P905 - the best tablet out there - developement...
The feedback is however somehow hard to understand.
Can someone summarize if any of those builds work (ie. boot at least...) at the moment?

esgie said:
First, thanks so much for P905 - the best tablet out there - developement...
The feedback is however somehow hard to understand.
Can someone summarize if any of those builds work (ie. boot at least...) at the moment?
Click to expand...
Click to collapse
Me and Rusty-island tested and both of us got bootloop. Valera1978 removed the link to the rom. Maybe he is preparing a new version. He doesn't have the device, so he is developing in the dark and needs fast and precise feedback. :fingers-crossed:

js345 said:
Me and Rusty-island tested and both of us got bootloop. Valera1978 removed the link to the rom. Maybe he is preparing a new version. He doesn't have the device, so he is developing in the dark and needs fast and precise feedback. :fingers-crossed:
Click to expand...
Click to collapse
Hi! Just to say that I am also stuck at the samsung logo screen on boot. If I can help in some way, let me know.

valera1978 said:
i'm not responsible for any damage to your device of any sort.
By flashing this you take responsibility of anything that happens.
Process at your own risk!
this is first draft version, i'm not able to check it myself (i have p900 only). This is port - it's based on .........
thanks
thanks to cyanogenmod team and special thank to crpalmer, his hard work on fix all problems for original sm-t525 finally allow create the port for sm-p905.
Click to expand...
Click to collapse
awesome!!!! Thanks for such awesome rom!
---------- Post added at 10:25 AM ---------- Previous post was at 10:24 AM ----------
Looking forward for new updates!

Valera1978 said:
CyanogenMod Port:
3: V2 - original boot.img for tests -should load, but will be set of problems like mount sdcard:
2: V1 - add correct dtb.img
1: V0 - bootloop
Click to expand...
Click to collapse
Thanks again for the rom. It's been some time that no new version has been posted (V2 being stuck at Samsung Logo). Do you have ideas on how to solve the problem and are you still working on it? If I can be of any help for testing, it will be a pleasure.

updates? Looking forward for that! Please count me in if you need any feedback logs..

@Valera1978
Hey, first off, thank you for your efforts! :good:
And please, don't give up! You are actually have been the only dev to create such awesome thing to out P905 and P905M.
So THANK YOU, and please KEEP IT UP.

Afaik dev has removed links to the roms. Is it however possible to reupload, even non-working, roms again? If the problem is in the kernel itself only, the community might be able to find a way to run the roms by modifying available kernels, so they still may be highly usable.
Hope the developement will be continued....

+1
I would love to see this project get back again. It would be awesome to run CM into our devices.

u mentioned this is a port for the P905..this is the verison varaint correct?..my model number has a V on the end of P905..did you leave the V out or is this another varaint?...this is only rom ive found for the verison varaint ..hope this is for it..cause there is nothing else..im assumeing im gonna go ahead root with towel root,flash twrp recovery for theverison variant,then install this rom,cause its only one with my model number...is this a stable rom yet?...thanks in advance for any assistanse or response..and thank you for the hARD WORK ON THE ROM!! WE ALL APPRECIATE IT
edit-...OK IN SEE THIS ISNT SUPPORTED ANY LONGER...SORRY...ANY ROMS FOR THE sm-p905v VERISON VARIANT YET..DONT SEE ANY YET..

It's not stable yet and work was started on the rom and then it stopped suddenly... hopefully the dev picks it back up or another dev does... these are great tablets would be awesome to get a working rom for the p905 versions