Problems with latest CM10 nightly - T-Mobile, Samsung Galaxy SIII

Need a little help here... Been on CM 10 from the beginning on my TMobile s3 with no problems. After I downloaded the 8-18-12 nightly my phone will not get past the android setup screen?? Anyone else having this issues and what can I do about this? Thanks!!

I just installed it and it works fine so far. Try another wipe and install. Or maybe your download is bad.

CM 10 nightly issues
sswb27 said:
I just installed it and it works fine so far. Try another wipe and install. Or maybe your download is bad.
Click to expand...
Click to collapse
Tried nightly download from cyanogen site & rom mgr. to no avail?? My rom mgr is updated, did full wipes and no luck. Reverted back to 8-14 with no issues. Haven't heard anyone else having this issue and I've never had any issues downloading CM before?? Weird. Thanks for the info.

sswb27 said:
I just installed it and it works fine so far. Try another wipe and install. Or maybe your download is bad.
Click to expand...
Click to collapse
First time I installed it, it worked out fine but there was a few minor issues like camera won't upload pictures and videos to facebook, Unable to update status. I decided to flash it again but this time I wiped dalvik 3x cache and data 2x format system cache data 2x each. After doing that everything worked out fine.

ak4life23 said:
First time I installed it, it worked out fine but there was a few minor issues like camera won't upload pictures and videos to facebook, Unable to update status. I decided to flash it again but this time I wiped dalvik 3x cache and data 2x format system cache data 2x each. After doing that everything worked out fine.
Click to expand...
Click to collapse
Yes, I had the same problem. It seems to work sometimes, sometimes not. Just do the 3 types of wipes, and try again- it should work.
One hint: during the installation of the ROM when it says "unleashing the evil"- it should take a good 20 seconds (or so) to "unleash". On the installations that failed for me it said "unleashing the evil" and immediately finished installing- and then the boot after that failed too....

Wipe 3x's?
jon.s.nelson said:
Yes, I had the same problem. It seems to work sometimes, sometimes not. Just do the 3 types of wipes, and try again- it should work.
One hint: during the installation of the ROM when it says "unleashing the evil"- it should take a good 20 seconds (or so) to "unleash". On the installations that failed for me it said "unleashing the evil" and immediately finished installing- and then the boot after that failed too....
Click to expand...
Click to collapse
Thanks for all the info. This morning I tried the download again from ROM mgr. and it worked fine Didn't do anything different but it worked!! Also, when you say wipe 3 x's, how do you do this? I installed today from ROM mgr. and it pops up to wipe and I check all boxes. After install is complete it auto boots into new build. Should I go back to recovery and wipe again or?? Thanks again.

Since I used the recovery to wipe, I was taking about wiping the 1) user data (factory re set), 2) the cache, and 3) the dalvik cache. If you're using the ROM manager, I'm sure what you did was fine. Truth is, I don't think all of the 3 wipes I did are always necessary especially if you're just upgrading from a previous build... Good luck!
Sent from my SGH-T999 using xda app-developers app

jon.s.nelson said:
Since I used the recovery to wipe, I was taking about wiping the 1) user data (factory re set), 2) the cache, and 3) the dalvik cache. If you're using the ROM manager, I'm sure what you did was fine. Truth is, I don't think all of the 3 wipes I did are always necessary especially if you're just upgrading from a previous build... Good luck!
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
Thanks! Went ahead and booted into recovery and did the wipes again anyway. Seems to be working great.

I had that problem last night.
What I did was go into Clockwork and installed google apps. Then rebooted and it went through the setup without any problem.

Thanks Cyanogen & Crew
Just wanted to say thanks to all that works on CM 10. I'm running the 9-6-12 nightly on My mobile Beastly S3 & we are very close to stable! Thanks for all your hard work.

Related

[Q] ggingerbread-6

I flashed this rom(I know it's beta) but today it just froze on me. I went to reboot to see if that would help and the phone got stuck on the HTC EVO 4G white screen, so I pulled the battery, hit the power button and nothing still. Just gets stuck on the same screen.
Now, I'm restoring using a backup.
I'd just like to know what happened. I was using it like normal, except I enabled 4G today.
sounds like a rare issue, if you can replicate it with the cm nightlies (being that gginggerbread is discontinued) I'm positive that they would love to see a logcat of it
I unfortunately dont have a fix or knowledge of one for that issue
I agree, wipe everything and flash the latest nightly and then immediately the latest Gapps
http://mirror.teamdouche.net/get/cm_supersonic_full-6.zip
http://goo-inside.me/gapps/latest/7/
NewZJ said:
sounds like a rare issue, if you can replicate it with the cm nightlies (being that gginggerbread is discontinued) I'm positive that they would love to see a logcat of it
I unfortunately dont have a fix or knowledge of one for that issue
Click to expand...
Click to collapse
Why was it discontinued?
it merged with cm nightlies, they have 4g now
Thanks for all the info.
I've flashed the nightly cm7 and gapps and the gmail app is missing. I can't find it in the market either.
I should probably search the cm7 threads?
reboot your phone, gmail should reappear
you did flash the 20110120 gb gapps, or the one rom manager downloads for it?
NewZJ said:
reboot your phone, gmail should reappear
you did flash the 20110120 gb gapps, or the one rom manager downloads for it?
Click to expand...
Click to collapse
I flashed the 20110120 gb gapps. The one in the link from the guy above.
EDIT: Rebooting didn't do the job.
did you flash over your gginggerbread install or start from scratch?
I'm thinking I flashed over?
I installed the latest version of Amon Ra's recovery, wiped everything, wiped cache then dalvik.
After that I flashed the rom.
running_onCode said:
I flashed this rom(I know it's beta) but today it just froze on me. I went to reboot to see if that would help and the phone got stuck on the HTC EVO 4G white screen, so I pulled the battery, hit the power button and nothing still. Just gets stuck on the same screen.
Now, I'm restoring using a backup.
I'd just like to know what happened. I was using it like normal, except I enabled 4G today.
Click to expand...
Click to collapse
Whenever you get stuck on white screen, boot into recovery and wipe dalvik and cache before rebooting. If that doesn't work, reboot into recovery wipe dalvik and cache and reflash rom. This usually works for me.
running_onCode said:
Thanks for all the info.
I've flashed the nightly cm7 and gapps and the gmail app is missing. I can't find it in the market either.
I should probably search the cm7 threads?
Click to expand...
Click to collapse
Do you use Titanium Backup? If so, open app list and look for "Market App Installer 1.0". Click on it and hit defrost. Now open up market. You should now be presented with list of GAPPS you want installed. See if you can click Gmail.
krazyflipj said:
Whenever you get stuck on white screen, boot into recovery and wipe dalvik and cache before rebooting. If that doesn't work, reboot into recovery wipe dalvik and cache and reflash rom. This usually works for me.
Do you use Titanium Backup? If so, open app list and look for "Market App Installer 1.0". Click on it and hit defrost. Now open up market. You should now be presented with list of GAPPS you want installed. See if you can click Gmail.
Click to expand...
Click to collapse
Yes, I used Titanium Backup. Just followed your instructions and nothing still.
EDIT: Should I kill Market first then follow you instructions?
running_onCode said:
Yes, I used Titanium Backup. Just followed your instructions and nothing still.
EDIT: Should I kill Market first then follow you instructions?
Click to expand...
Click to collapse
Try clearing data in Market menu>settings>applications>manage apps
If this doesn't work, you might have to do a complete wipe and reinstall.
krazyflipj said:
Try clearing data in Market menu>settings>applications>manage apps
If this doesn't work, you might have to do a complete wipe and reinstall.
Click to expand...
Click to collapse
Sh*t didn't work. I just a complete wipe before installing this from ggingerbread-6.
I was thinking maybe I should use Calkulin's format all?
running_onCode said:
Sh*t didn't work. I just a complete wipe before installing this from ggingerbread-6.
I was thinking maybe I should use Calkulin's format all?
Click to expand...
Click to collapse
if your gonna wipe, do it all
NewZJ said:
if your gonna wipe, do it all
Click to expand...
Click to collapse
Just did the format all. Now, I've been on the HTC EVO 4G screen for about 3 minutes so far.

Just flashed CM7 Stable Rom Need help Read!

So i just flashed cm7 the stable version, first thing i do is turn on my wifi, but when it obtains the ip adress etc, it keeps rebooting and turning off rebooting, and just keeps doing that over and over again. any suggestions?? anyone?
Have you tried reflashing it on a clean install? You also flashed gapps with it?
yes, i even wiped alll that thing like dalvik and all that good stuff and flashed gapps right after. this started happening to me with rc3 rc4 and now stable cm7, works fine with cm2
Did you flash a kernel with it?
whats that?
cocoes4o8 said:
whats that?
Click to expand...
Click to collapse
Well that's a no then. And the kernel is basically the heart of the phone operation. Different kernels do different things, but we can worry about that later.
Now I'd like you to backup your apps, then re-flash the rom completely, along with gapps.
If it is turning on Wifi only that causes the issue, it may be something with what is remembered in your wifi access points.
Delete your access point. Turn on Wifi and re-attach.
should i wipe dalvik cache also?
cocoes4o8 said:
should i wipe dalvik cache also?
Click to expand...
Click to collapse
Yes; you need to wipe factory/data, cache, and dalvik cache. The flash the rom, wipe cache and dalvik, then flash gapps, then reboot.
just finished doing all that
Any improvement?
WIFI Sleep policy set to NEVER?
thanks!! it works!!! ok i have one more problem, this has been happening to me since i flashed cm7 any cm7, i use email alot but it doesnt give the right time date etc, each and every email date is 12/31/1969
cocoes4o8 said:
thanks!! it works!!! ok i have one more problem, this has been happening to me since i flashed cm7 any cm7, i use email alot but it doesnt give the right time date etc, each and every email date is 12/31/1969
Click to expand...
Click to collapse
Have you tried updatinng / reinstalling the app?
yes even downloaded a different email program.
the email thing
might be a problem from your email server what service do you use is it a public or a private service such as work email or a simple yahoo gmail hotmail? type pop 3 that could explain it more in depth
teh roxxorz said:
Yes; you need to wipe factory/data, cache, and dalvik cache. The flash the rom, wipe cache and dalvik, then flash gapps, then reboot.
Click to expand...
Click to collapse
ok when i flashed cm7 final my market was jus loading forever so i did those steps n now it works but ive been haven an issue wit the facebook app...when i go to my messages it jus forcloses same goes for when i checkin...any ideas
weztcoazt said:
ok when i flashed cm7 final my market was jus loading forever so i did those steps n now it works but ive been haven an issue wit the facebook app...when i go to my messages it jus forcloses same goes for when i checkin...any ideas
Click to expand...
Click to collapse
When you flashed, did you flash the gapps?
And facebook app has been giving people problems...I think the word was to go back to 1.52 [the previous version before latest update] and you should be good.
I don't have a facebook, so no help with that app, sorry.
teh roxxorz said:
When you flashed, did you flash the gapps?
And facebook app has been giving people problems...I think the word was to go back to 1.52 [the previous version before latest update] and you should be good.
I don't have a facebook, so no help with that app, sorry.
Click to expand...
Click to collapse
yeah i flashed it right after the rom....but ok no worries no biggie jus tryin to see if it could b fixed...also when i run the car home app n select "navigate" it tells me "no activity found"...whats wrong
You should always do a factory like reset before flashing a rom.
When I went to CM7 I did this.
Ran a Nandroid backup of Stock rom
Ran the GPS Fix for CM7 before going to CM7
Cleared Dalvik cache
Cleared Cache
Cleared Data
Flashed CM7
Flashed GApps
ReBooted
If you used TB to backup everything on your old rom then ONLY install the Apps NOT the data. Also I have noticed that a lot of people are just running a Restore everything from TB that may have something to do with it. I only installed third party apps like barcode scanner, Game Fly, PicSay, Directv. Do not restore anything that was a system app from your other rom.
And so far everything has been great.

[Q] Joelz's Sense 3.0

Apparently after a couple of days the everything gets unstable and i stop receiving texts and framework force closes. This has happened on every version and I'm wondering why?
BTW Love this Rom! It'd be a daily if it wasn't for this fact
Did you wipe EVERYTHING 3x?
I had some problems with 3.0, but I'm running on UBER Kingdom and it's been working almost flawlessly.
Ive usually wipe everything except the mounts and things at least twice and flash twice. Can you post the installation instructions so i can try again?
To hit everything, do these in recovery:
Wipe data/factory reset
Wipe cache
Wipe dalvik cache
Format boot
Format system
(The data and cache partitions are wiped by the previous wipe data, wipe cache commands)
i was also having problems with hybrid 3.0. soft reboots after everything switched back to uber's and all is fantastic again.
Did you try just restarting your phone? I know that after a few days custom roms will sometimes start acting up.
Sent from Sky Raider 4.2 and xda premium
I have actually tried to restart and the messagesCS fc usually goes away for a couple of minutes and then comes back. Thanks for the instructions too.
XxCha0sxX said:
I have actually tried to restart and the messagesCS fc usually goes away for a couple of minutes and then comes back. Thanks for the instructions too.
Click to expand...
Click to collapse
Before you wipe, try rebooting into recovery and repair permissions. If that doesn't work then start fresh.
Sent from Sky Raider 4.2 and xda premium
Thanks ill try it
So far so good

[Q] Help? I get this when flashing a new rom "Unfortunately setup wizard has stopped"

[Q] Help? I get this when flashing a new rom "Unfortunately setup wizard has stopped"
I have a Galaxy s3 and I have twrp installed. And so far I have tried flashing 4 or 5 different custom roms and every time I end up getting this message "Unfortunately setup wizard has stopped" and then some message about ".com.goolge gpapps has stopped".
I am flashing the rom's and gapps from trwp. And I get the success comment after both the rom and gapps flash. I then restart/reboot and the new rom's custom boot animation comes up, like with cm10 the blue clockwork logo spins, and then after 10 or 20 seconds I get the two error messages and thats its. And when I flashed liquid smooth, I got the Liquid Smooth boot animation.as well and the the two messages. I eventually get my phone tuned off and I get it booted back into twrp and restore my backup to my stock rooted setup which is what I currently have running and so far is the only thing I can get to boot up. I have tried cm10 nightlies from the past week and cm10 stable and liquidsmooth, and a couple others. I downloaded several from goo.manager but i most recently tried a cm nightly i downloaded directly from clockworks site.
Any Idea's. I have seen a couple other threads on other devices with a similar problem but most seemed to have the wrong gapps, and I am using the most current gapps, i even downloaded it from multiple sources to double check.
Does the fact my phone is android 4,1,1 and most these roms are 4.1.2 or newer matter? And if so what is the fix?
nwjimmy said:
I have a Galaxy s3 and I have twrp installed. And so far I have tried flashing 4 or 5 different custom roms and every time I end up getting this message "Unfortunately setup wizard has stopped" and then some message about ".com.goolge gpapps has stopped".
I am flashing the rom's and gapps from trwp. And I get the success comment after both the rom and gapps flash. I then restart/reboot and the new rom's custom boot animation comes up, like with cm10 the blue clockwork logo spins, and then after 10 or 20 seconds I get the two error messages and thats its. And when I flashed liquid smooth, I got the Liquid Smooth boot animation.as well and the the two messages. I eventually get my phone tuned off and I get it booted back into twrp and restore my backup to my stock rooted setup which is what I currently have running and so far is the only thing I can get to boot up. I have tried cm10 nightlies from the past week and cm10 stable and liquidsmooth, and a couple others. I downloaded several from goo.manager but i most recently tried a cm nightly i downloaded directly from clockworks site.
Any Idea's. I have seen a couple other threads on other devices with a similar problem but most seemed to have the wrong gapps, and I am using the most current gapps, i even downloaded it from multiple sources to double check.
Does the fact my phone is android 4,1,1 and most these roms are 4.1.2 or newer matter? And if so what is the fix?
Click to expand...
Click to collapse
Are you wiping system and data before flashing? This is most likely your issue.
zelendel said:
Are you wiping system and data before flashing? This is most likely your issue.
Click to expand...
Click to collapse
yes, cache and dalvik, and a factory reset.
nwjimmy said:
yes, cache and dalvik, and a factory reset.
Click to expand...
Click to collapse
Ok what you have to try is this.
Boot into recovery and wipe system and data (removes settings so you will need to reset up everything) They wipe delvic cache and normal cache, then flash the rom and the proper gapps for the rom.
zelendel said:
Ok what you have to try is this.
Boot into recovery and wipe system and data (removes settings so you will need to reset up everything) They wipe delvic cache and normal cache, then flash the rom and the proper gapps for the rom.
Click to expand...
Click to collapse
On the wipe screen in twrp there is a system option but for data it says format data? Do I need to wipe "system" and "format data"? or does the wipe system option take care of what i need to do? If I need to also select "format data" which do I do first ? format data or system wipe? will i need to wipe cache or dalvik as well, or will those be wiped in the system wipe? Sorry for all the ?'s I am a real noob at all of this.
nwjimmy said:
On the wipe screen in twrp there is a system option but for data it says format data? Do I need to wipe "system" and "format data"? or does the wipe system option take care of what i need to do? If I need to also select "format data" which do I do first ? format data or system wipe? will i need to wipe cache or dalvik as well, or will those be wiped in the system wipe? Sorry for all the ?'s I am a real noob at all of this.
Click to expand...
Click to collapse
No wiping the system doesnt format the data partition. Wipe system then format the data and then wipe the caches and then flash the rom.
Re: [Q] Help? I get this when flashing a new rom "Unfortunately setup wizard has stop
Sounds like your flashing the wrong version of gapps.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Re: [Q] Help? I get this when flashing a new rom "Unfortunately setup wizard has stop
matt_schieman said:
Sounds like your flashing the wrong version of gapps.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Agreed.
Double check your gapps and make sure uts the right version
sent from my 1920 overclocked note 2 running jedi xp12
What gapps should I be using ? I hav gapps jb -20121011. I havnt wiped the additional areas yet either but thats because I want to make sure im installing the correct zip files
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
nwjimmy said:
What gapps should I be using ? I hav gapps jb -20121011. I havnt wiped the additional areas yet either but thats because I want to make sure im installing the correct zip files
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Most rom threads have a download link to the gapps that work with the version of android that specific rom is on. Look in the rom thread for the one you're currently running. There are different gapps for each android version (4, 4.1, 4.2)
I have that same problem too
I was trying to install new roms for my phone i tried liquid smooth and avatar and CM 10. I also tried install a new kernel and also different recoveries but nothing seems to work. I never "dirty" flashed and i use the right gapps. Someone please help me here i hate stock roms!
No matter what Gapps version I've tried I still get this same error. This occurred after trying out the Dark ROM modeled after CM11, but now no matter what ROM I try, this error still occurs. The only time I was ever able to get passed it was using a backup, but that has mysteriously gone AWOL. With that in mind, has anyone actually figured this out? Is there anyone with any USEFUL input? So far all I'm seeing is a bunch of suggestions that don't work.
xantechie said:
No matter what Gapps version I've tried I still get this same error. This occurred after trying out the Dark ROM modeled after CM11, but now no matter what ROM I try, this error still occurs. The only time I was ever able to get passed it was using a backup, but that has mysteriously gone AWOL. With that in mind, has anyone actually figured this out? Is there anyone with any USEFUL input? So far all I'm seeing is a bunch of suggestions that don't
Is your recovery updated to the latest version? Do the roms you are trying support the recovery you are using?
Click to expand...
Click to collapse
fig03 said:
xantechie said:
No matter what Gapps version I've tried I still get this same error. This occurred after trying out the Dark ROM modeled after CM11, but now no matter what ROM I try, this error still occurs. The only time I was ever able to get passed it was using a backup, but that has mysteriously gone AWOL. With that in mind, has anyone actually figured this out? Is there anyone with any USEFUL input? So far all I'm seeing is a bunch of suggestions that don't
Is your recovery updated to the latest version? Do the roms you are trying support the recovery you are using?
Click to expand...
Click to collapse
That's a good point. You should be on TWRP 2.7.0.0 that's the latest version of that recovery.
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I use the latest CWM. I'm a creature of habit. The first Samsung I ever put a custom ROM on was done with CWM, so I stick with it. I finally got it to go, but it constantly froze, tried to reset, stuck with the same issue. Never used TWRP, so if someone could actually point me in the right direction, that'd actually be helpful.
xantechie said:
I use the latest CWM. I'm a creature of habit. The first Samsung I ever put a custom ROM on was done with CWM, so I stick with it. I finally got it to go, though...it doesn't really look the way I remember it last it worked, but it's had the issue so long, I forget what it actually looked like before.
Click to expand...
Click to collapse
I have no idea how to use TWRP...it only lists a .img file and no instructions on how to use it. zip files can be used from the bootloader or recovery. WTF am I supposed to do with an .img file. And it can't be to use the terminal emulator because to do that I would have to be able to get passed the Setup Wizard...which is the issue.
I finally figured it out with CWM. Thankfully. The phone would've went flying otherwise.
If anyone else stumbles upon this thread (so they can find the answer for CWM also), you have to format the device from the CWM Recovery to get rid of the crap that is blocking it. I did the following:
Once in CWM Recovery, Remove your SD card to avoid formatting it by accident.
Use the Volume Key to scroll to "mounts and storage".
Format all existing options (this is why the SD needed to be removed); this will blank out the phone's system which was causing the Setup issue to begin with.
Put your SD card with the ROM to be installed back into the phone.
Follow the guide as normal after this (install ROM, then reboot, then KK_gapps, then wipe the two caches, then reboot.)

[Q] Flashing issue or not ?

Hi, in the last minutes i've flashed the 2.7 build of LiquidSmooth Rom from the Paranoid Hello Halo rom... I've done the prcedure like XDA said : Wipe Wipe Wipe (cache, dalvik, system) Flash Rom Flash Gapps. It booted fine but all my apps that i've had on my previous rom was still there... all of them. The most disturbing is my settings were also like I've left them ( disabled pie wifi etc) also my Google Accound was already setuped and good to go. Is it a new feature from flashing 4.2.2 rom to an other 4.2.2 rom ? I've never seen that before. I've also rebooted to make sure it wont boot loop on reboot, and it booted like a charm!
Any clues ?
Weird, never seen that before. Tell us what recovery you have and exactly what you are wiping. Can't think of anything else at the moment I'm sure others will chime in.
Sounds to me like you're not wiping /data. This is where your apps and setting are stored and unless you factory reset using stock recovery, deliberately wipe/format /data, or flash a Rom that wipes it for you, all your apps and settings will remain.
Seems like normal behavior to me.
Sent from my SGH-T999L using xda premium
Ya I re-read it and he just wipes caches and system, definitely need to factory reset lol.
kruse1944 said:
Hi, in the last minutes i've flashed the 2.7 build of LiquidSmooth Rom from the Paranoid Hello Halo rom... I've done the prcedure like XDA said : Wipe Wipe Wipe (cache, dalvik, system) Flash Rom Flash Gapps. It booted fine but all my apps that i've had on my previous rom was still there... all of them. The most disturbing is my settings were also like I've left them ( disabled pie wifi etc) also my Google Accound was already setuped and good to go. Is it a new feature from flashing 4.2.2 rom to an other 4.2.2 rom ? I've never seen that before. I've also rebooted to make sure it wont boot loop on reboot, and it booted like a charm!
Any clues ?
Click to expand...
Click to collapse
Tapatalk.
mt3g said:
Ya I re-read it and he just wipes caches and system, definitely need to factory reset lol.
Click to expand...
Click to collapse
Got it that's why. I was sure wiping system would wipe data too. But do you think its dangerous to not wipe data? Because actually my ROM is rocking right now without issues? Should I reflash it for safety?
It just depends....
It's always best to start clean, especially if you were having problems. But if you want to keep data intact, you should be ok as long as you don't go to an entirely different rom, base, or build.
If you are updating to a newer version of the same build, you're fine. Also if updating to a newer build/version you should be ok, but may have a few hiccups.
However, anytime you go backwards (4.2.2 to 4.1.2) you should wipe it all. The same is true if you are moving to a different base, such as CM to TW. Keeping your internal sdcard data is usually ok, but sometimes it can cause some issues.
Sent from my SGH-T999L using xda premium

Categories

Resources