Develop Bugs

Dena theme for JPO

NEW DENA Theme for JPO
This is the version of dena theme for JPO
Root your phone
install lagfix
install busybox
Managed to get it working using Android SDK tools. ROOT needed
Connected my phone via usb with the computer ... USB debuging needs to be enabled before connecting the phone.
copy the files included in Dena Theme to your internal SD card.
1. adb shell
2. su (grant su rights on your phone when asked)
3. mount -o rw,remount /dev/block/mtdblock3 /system
3. rm system/framework/twframework-res.apk
4. rm system/framework/framework-res.apk
5. rm system/app/settings.apk (if no file is found try Settings.apk ... no ide if it matters tho)
6. busybox cp sdcard/twframework-res.apk system/framework
7. busybox cp sdcard/framework-res.apk system/framework
8. busybox cp sdcard/Settings.apk system/app
Then reboot your phone manually.
Link:
http://www.rapidshare.com/files/428036654/Dena_theme_v1_3_for_JPO.zip
Is the same about JPM!!!!
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Dena Theme for JPO update.zip
So now here is the update zip version of dena theme you must have CLWR installed
Copy on sdcard boot in to recovery mode and select install zip from sdcard!!!!
http://rapidshare.com/files/428337952/Dena_theme_for_jpo_update.zip
Have fun!!!

great...thanks for the porting..

I have Installed this but it works not corectly, freezes when push power and when i will go to settings!
It something wrong with the Settings.apk! I have replaced with the Doc_Kalpik Froyo JPO 7.01 settings.apk and then works!!!

Pls update in an other upload site, RS is not working for me!!!

ale0crysis said:
Pls update in an other upload site, RS is not working for me!!!
Click to expand...
Click to collapse
same problems

+1
10char

Can someone post another download link? It doesn't work!

I cant reach power menu on power button
restart phone nothing happend
samebody have same issue

hensk said:
I cant reach power menu on power button
restart phone nothing happend
samebody have same issue
Click to expand...
Click to collapse
same issue, need to pull out the battery and restart onto recovery, then re-flash doc's theme...
flashed with cwm of course

The theme is awsome but for some reason this JPO version screws up my lockscreen, I get a flickering blank coloured screen that I can pull away like the standard one, any ideas how I could fix that?

does it works on JPA?
link is dead tho.

It's awesome but full of bugs!!
- No power button (it crashs)
- No Settings mode (it says not installed (lol) )
- You can't insert widget in home screen
pls fix it!

reflex9000 said:
I have Installed this but it works not corectly, freezes when push power and when i will go to settings!
It something wrong with the Settings.apk! I have replaced with the Doc_Kalpik Froyo JPO 7.01 settings.apk and then works!!!
Click to expand...
Click to collapse
how you replaced it? I've tried replacing settings.apk but when i install on the status bar in CWM everything is blocked!
can you update somewhere or sending to me your working zip pls?

[Guide][zip][Root needed] Unsimlock your Defy (v1.3)[NEW:JB support!]

This is a software unlock for the Motorola Defy​
NEW: Jelly Bean roms and ICS roms work!
See the troubleshooting post (post N°2) if you have problems!
Last update: 06/06/2012 ->Troubleshooting section updated (see post 2)
Disclaimer: This manipulation is not risk free. Niether I nor XDA Developpers can be held responsible for damage made upon your phone. Thus, don’t worry we're doing good work and you'll do a backup
Root is needed!
Credits go to yakk from motofan.ru / Special thanks to Labsin for his involvement and help​
Note: Not all Baseband versions work with this hack, to know if it will work for you, go to settings-> system info and check if baseband version is "EPU93_U_00.59.01". If it is not indicated there, then try installing defybaseband switcher and look at info in the app
If your baseband version is different, you can try to change it to the one that works (nandroid backup first ) by downloading Baseband_change(EPU93_U_00.59.01).zip, and putting it in /sdcard/, and flashing it via recovery.​
Flashing a zip has never been easier
Thanks to labsin, there's an easy flashable.zip that will:
Backup your original two files and put them in the folder "simlock_original_files" on your SD card (safety first )
Apply a modification to init.mapphone_umts.rc
Copy the fixed bp_ptc file
Go into recovery, flash Softunlock_defy_v1.1.zip that fits your baseband version and you're done!
​
!!YOU MUST REBOOT ONCE AFTER THE OPERATION BEFORE CHANGING SIMS!!​
Voila!
Don't forget to reboot phone once!
Only then you can test by rebooting with another simcard
Hit thanks button if i helped you!
Any problems? I'm here to help

Changelog​
v1.3:
ICS ROMs are now fully supported!
v1.2:
zip will check if the line to be added already exists, so it doesn't get added more than once
v1.1:
automated zip that will add a line in mapphone_umts and copy fixed pt_ptc in system
Troubleshooting​
I have no signal when i put another simcard in my Defy
Have you rebooted at least once BEFORE changing sim cards??​Try using Defybaseband switcher to select the correct frequencies for your carrier​Try method below​
You are still asked the unlock code
- Turn on Airplane Mode
- Run Terminal emulator and type "su" and then "bp_ptc"
- Turn ofr Airplane Mode​
Airplane mode won't turn off
Flash the baseband(EPU.0.59..) file in the first post, then play around with your APNs and network settings untill you fix it (see post 308)​
You are having trouble unlocking a stock ROM
See Post 260​
Proof of success​
jorgeoro said:
Holy mother of Jesus, I could unsimlock my defy+ (plus) . Here is what i did (i think some steps could be ignored but is good to know the entire procedure i've done)
1) Because of a failed CM7 flash, first I flashed a 2.3.5 SBF
2) Flashed quarkx 26-feb nightly for defy+ (baseband EPU93_U_00.60.00)
3) Changed to a proper baseband with defy-baseband-switcher v4.0
3) Changed to baseband EPU_U_00.59.01 following steps mentioned in 1st page
4) Flashed softunlock 1.2 for EPU_U_00.59.01
5) Rebooted (still no sim change till this step)
6) Power off the phone and changed SIM
7) Rebooted
8) Almost had an orgasm
I'll be posting links i used later if somebody ask for them
Thanks to all people directly and indirectly involved (very special thanks to crakeron for his help)
Click to expand...
Click to collapse

So I guess i use root explorer to put the files where they go?

thisjustin said:
So I guess i use root explorer to put the files where they go?
Click to expand...
Click to collapse
Correct
A simple copy/paste operation

crakeron said:
Correct
A simple copy/paste operation
Click to expand...
Click to collapse
Ok thanks got it

Update.zip
Made it as an update package so you don't need to use root-explorer...
It should just copy the appropriate files and set the right permissions.
Edit: Now makes a backup to defy_simlock_originals on your sd

labsin said:
Made it as an update package so you don't need to use root-explorer...
It should just copy the appropriate files and set the right permissions.
Click to expand...
Click to collapse
Ready to flash from 2nd-init recovery?
Thank you very much!

flashed via 2nd init now testing just got to find my at&t simcard

Garrafone said:
Ready to flash from 2nd-init recovery?
Thank you very much!
Click to expand...
Click to collapse
Should be that yes. Don't have a locked Defy but should do it.
thisjustin said:
flashed via 2nd init now testing just got to find my at&t simcard
Click to expand...
Click to collapse
Can you pls tell it the zip works? Should be the same as pasting so..

Didn't work with the zip

R you on CM7 and witch version? First post also mentions reboot afterwards with good sim and reboot again with other sim.
Did it work the way mentioned in first post?

labsin said:
Made it as an update package so you don't need to use root-explorer...
It should just copy the appropriate files and set the right permissions.
Click to expand...
Click to collapse
Awesome! Thanks! I'll put this in the OP tonight (with credits of course)
Sent from my 1Ghz CM7 + CM9 Defy

thisjustin said:
Didn't work with the zip
Click to expand...
Click to collapse
labsin said:
R you on CM7 and witch version? First post also mentions reboot afterwards with good sim and reboot again with other sim.
Did it work the way mentioned in first post?
Click to expand...
Click to collapse
I admit: I haven't tried this yet, but I did noticed that the OP says to replace init.mapphone_umts.rc to: /system/bootmenu/2nd-init/ and that your patch copies it to: /system/bootmenu/2nd-boot/ folder...
I'm could be wrong on this, but I believe that most people use 2nd-init boot by default (I've only used 2nd-boot while having ICS as dual boot before). But again; I'm just guessing here and could be totally wrong and it might make no difference...
Cheers, and btw, thanks for teaching me how to backup files [with a zip patch]

My OP say's 2nd-init, are you talking about the flashable zip?
Sent from my 1Ghz CM7 + CM9 Defy

crakeron said:
My OP say's 2nd-init, are you talking about the flashable zip?
Sent from my 1Ghz CM7 + CM9 Defy
Click to expand...
Click to collapse
Yes, the flashable zip replaces the file in 2 nd-boot directory so I thought that it "might" be why it didn't work for that guy...

[] AL [] said:
Yes, the flashable zip replaces the file in 2 nd-boot directory so I thought that it "might" be why it didn't work for that guy...
Click to expand...
Click to collapse
True, i'll modify it quickly
Sent from my 1Ghz CM7 + CM9 Defy

thisjustin said:
Didn't work with the zip
Click to expand...
Click to collapse
retry with the new zip, there was an adress error in the old one (nothing bad, don't worry)

New flashable zip uploaded. Fixed (changed .../2nd_boot/... to ..../2nd-init/....)

Hello, the file /system/bootmenu/2nd-init/init.mapphone_umts.rc provided did not work for me. It did not detect any SIM card.
So I edited the original file to defy me and I added the line "service bp-ptc /system/bin/bp_ptc" around line 194 (This can change depending on your file) after the line "user root" in the section "# Adb over Network"
After the copy on my smartphone with correct permissions, it worked.
If it can help

erghaize said:
Hello, the file /system/bootmenu/2nd-init/init.mapphone_umts.rc provided did not work for me. It did not detect any SIM card.
So I edited the original file to defy me and I added the line "service bp-ptc /system/bin/bp_ptc" around line 194 (This can change depending on your file) after the line "user root" in the section "# Adb over Network"
After the copy on my smartphone with correct permissions, it worked.
If it can help
Click to expand...
Click to collapse
Thanks, seems very usefull
Edit: that line is at the right place in the files i gave so you had a different init.mapphone_umts.rc file probably. What ROM are you running?

[ROM][GB27 GB08 GA10 FL16][ODEX/DEODEX]Kobridge's Stock ROM+Tweaks+Addons

Like always, do it at your own risk. I'm not responsible for any damages on your device.
*Kobridge's GB27 Odexed/Deodexed ROM OP
*Kobridge's GB08 Deodexed ROM OP
*Kobridge's GA10 Odexed/Deodexed ROM OP
Kobridge's Stock FL16 Odexed/Deodexed ROM
What is this? (Thanks to everyone who help me to get rid of the really annoying ads. Now I don't see those annoying Ads after login)
This ROM is completely FL16 JB stock ROM with rooted, busybox added. There are three versions of this ROM based on odexed (pure stock) or deodexed.
1. CWM Flashable FL16 Pure Stock ROM (Odexed) - can be used with Data Wipe or No Data Wipe - Mirror
MD5 Check Sum - bcafc6e7fdb1a8a495850c5d131c15d7
2. CWM Flashable FL16 Pure Stock ROM (Deodexed apk) - only apk files deodexed - I don't think you need this.
3.CWM Flashable FL16 Pure Stock ROM (Fully Deodexed) - Deodexed /system/app + /framework - can be used with Data Wipe or No Data Wipe - Kobridge's_Stock_ROM_vFL16DS.2.zip 2/2/13 Updated!
MD5 Checksum: 7f8e5abf2109ddfd1430a5dfc7532006
How to Flash?
Before flashing this ROM, be sure that you have a nandroid backup available or make a new nandroid backup. Flash this ROM at your own risk, I'm not responsible for any damages on your phone!
The steps are same as other ROMs. You'll need a CWM recovery kernel to flash this ROM and after flashing this ROM, you will lose the CWM recovery kernel because this ROM replace the CWM recovery kernel with stock FL16 kernel.
You will also need to flash the FL16 modem zip file (separate link provided) while flashing this ROM. Or you can flash it separately.
No Data Wipe - if you want to keep your current manually installed non-stock apps, do not wipe the data partition. You would be able to use your old configuration in most cases. I used this option to upgrade my previous rom to FL16. No issues found.
Data Wipe/Factory reset - it's also ok doing factory reset or wiping data partition using CWM recovery tool before flashing this ROM if you want to do a clean install. There's no reboot nor force closing issue found.
Kernel & Modem
FL16 modem - zip - Mirror1
MD5 checksum: 16d0bf291fbb72f88d8ef010881fcb79
FL16 stock Kernel - zip Mirror1
MD5 checksum: 5346cefd4d1605a7665fed72c5cb2f5e
Do you want to remove the bloatware apps after flashing the stock rom?
Check out post# 2 below
Kobridge's Tweak Modes and Addons
To download, check out Post# 3 below
Kobridge's Silent Camera Mod vFL16.2 & vFL16.3a & vFL16.3b
Removed sounds - autofocus_error, autofocus_ok, camera_click, camera_click_bestshot, camera_click_short, shutter_500 (from Camera APK)
Auto_focus, Auto_focus_error, Cam_Start, Cam_Stop, camera_click, Camera_click_short, camera_empty, camera_focus, Charger_Connection, PowerOff, PowerOn, & all Shutter (from system ui audio)
Recently added - vFL16.3a & vFL16.3b - several new features added
Kobridge's System App Backup & Recovery Tool - Advanced users only
Note: Incorrect use of this tool would cause a bootloop. When this tool recovers system apps, it first deletes all system apps. So, after the recovery, all system setting values are set to default.
System App Backup from CWM recovery: This tool makes backup of your system apps from /system/app and /preload/symlink/system/app folders.
You can use this tool whenever you makes the nandroid backup, flashed new kernel or you have the system app changes. If something goes wrong with system app, you can use this backup to recover the system apps. This would be a very convenient tool for most of users because to recover the system app, we may spend lots of time - recover the system using ROM, nandroid backup and make the changes again, etc.
System App recovery tool: After you make the backup of your system apps using my system app backup tool, you can simply use this recovery tool from CWM recovery. It will restore the all system apps based on the backup data. This tool recovers the system apps from /sdcard/backup/system and /sdcard/backup/preload folders.
Benefits using Kobridge's System App Backup/Recovery tool -
you don't need to flash the bloatware remover or manually remove the system apps after flashing the rom. You can simply use this tool to go back to previous status.
If system does not boot with system app issue, just simply odin the recovery kernel and flash the backed up system apps using recovery tool. Flash the original kernel and reboot. Your phone will boot without doing everything again!
After the recovery, all system settings moves back to factory default - clean up effect
After the recovery, all system data stored in /data/data folder cleaned up and any garbages removed!
without wiping data partition, you can get the same effects for the system apps.
a lot more...
Cons using Kobridge's System App Backup/Recovery tool -
You lose the previous saved system settings. Every system app's settings goes back to factory default.
Kobridge's CSC Tweak - experience the extended menu and options
Note: If you changed the values by yourself or removed any CSC stock files, then CSC tweak may not work.
Tweak includes:
Menu - enabled search menu(search menu button), common pinchzoom enabled
Camera - silent mode option
Message - Message size, max slide count increased, max picture resolution increased, enabled reply all, group message, scheduled email sending (specify date, time), save voice message
Enabled all delivery, read confirmation menu from SMS, MMS, send email over sms, subject length from 40 to 120
Launcher,
contact - account icons in contact list, show all logs, call details, contact import/export option, menu to add reject list
call
web browser - default homepage changed to google, removed lots of favorites from default broswer
email
a lot more
Tdunham's Mods - check post#3
How to flash Kobridge's Tweak into Stock ROM
4 different Kobridge Tweak modes are available at post #3 below. Do not use this tweak other than Jelly Bean and stock rom.
Starting from this ROM, there's no tweak added on the Kobridge's Stock ROM. You need to separately download and flash it.
What's new on FL16 ROM -
Please report and check post #4 for up-to-dated information.
ROM version history:
FL16DS.2 : Current version [1/31/03] Fixed Telenav issue.
FL16DS.1 : Couple of minor changes from FL16DS.0 (changed to format /preload partition during flashing. few symlinks from /system/app folder removed. Link1
FL16DS.0 : Initial version. - Kobridge's_Stock_ROM_vFL16DS.0.zip download link1 link2
FL16OS.0 : Initial version. - No changes made from initial version - Kobridge's_Stock_ROM_vFL16OS.0.zip
Credits
SexTape for his leaked ROMs
sfhub for recovery kernel (EL26)
tdunham, Shadow_God for being a great developer and friend
rwilco12 for his great rom/kernel/modem repository and his XDA dedication
Special Thanks to:
leaderbuilder, Vadyr56, MN-Joe, Yaantra,JonSCSL,Doctor_XXX,draven760,RevAtB,cdss

Kobridge's Stock Bloatware Remover for Jelly Bean (FL16/FL04 ROM)
How to flash - just like flashing the rom, flash zip file from CWM recovery (I recommend to use EL26. You can find the EL26 CWM zip tar files in here)
You can flash this zip file just after flashing the rom or you can flash this zip file separately depending on your need. Be sure that after you flash this zip file, you may need to flash the original Kernel also at the same CWM session without rebooting your phone.
Where you can find the removed apps
You can find the removed apps from /mnt/extSdCard/Removed_Apps (system apps) and /mnt/extSdCard/Removed_Apps/preload (preload apps). To bring it back to your phone, move the apk files to /system/app or /preload/symlink/system/app folder and reboot.
Download Kobridge's Bloatware Apps Remover Tool vJB2.2
Download it from here - Kobridge's_Stock_Bloatware_Remover_vJB2.2.zip Mirror
No backup version - Download here - Kobridge's_Stock_Bloatware_Remover_NoBackup_vJB2.2.zip Mirror
How to recover old APK [or odex] files if I already removed some apps using previous version of bloatware remover:
To do this, you need to flash the ROM again that will recover all stock apps. At the same CWM recovery session, flash this bloatware remover and reboot.
Old version:
Kobridge's Bloatware Apps Remover Tool vJB2.1 - Do not use anymore Mirror
Code:
Books.apk
GoogleFeedback.apk
ID.apk
Magazines.apk
MediaHub_SdgtlSpr.apk
MobiTV.apk
mSpotRadioSprint_VPL.apk
Music2.apk
nascar09_prod.apk
NOVA2HD.apk
PlusOne.apk
PolarisOffice4.apk
SprintMobileWallet.apk
SprintMusicPlus.apk
SprintZone_DSS.apk [v2.1]
Videos.apk
YahoonewsDaemon.apk
YahoonewsWidget.apk
YahoostockDaemon.apk [v2.3]
YahoostockWidget.apk
Some useful info on JB ROM:
Some widgets are not working on JB depending on the launcher.
Samsung Task manager is not showing from app list. To launcher the app, you can use the widget or long pressed 'home' button to run the Samsung task manager.
Old sqlite3 binary does not work on JB. I had to change the sqlite3 binary in this rom to make the wifi sleep timer working.
It appears that external_SD under /SDCARD is no longer pointing to external SD card. Now it's under /mnt/extSdCard, /storage/extSdCard - I need to look at some scripts running during the boot.
System partition is too small to hold all apps. It seems like that's the reason why Samsung added /preload partition and moved some of non-core apps there. I tried to keep all apps into /system partition and phone didn't boot.
snapshot key - vol down + power do not work any more. To get the snapshot, press the home key + power button together
New way to recover the phone using Nandroid & stock ROM: (you can use this methond with Kobridge's system app backup/recovery tool)
Because Jelly Bean is using another partition which is not covered by our traditional CWM recovery. Whenever you restore your phone using nandroid backup oly, you may not get the full restore of your phone. It's because the /preload changes are not included. So, there is no way to backup this folder by cwm recovery.
So, what I'm suggesting method is
1. Be sure that you have a nandroid backup after JB rom flashed. Be sure that you have the flashable JB rom.
2. now to start the nandaroid recovery, reboot into cwm.
3. (full wipe data & cache) or do the factory reset
4. flash JB rom
5. (do not reboot after flashing the ROM) recover nandroid backup on the same recovery session
6. Flash Kobridge's Bloatware remover tool if you did that before
7. flash the JB kernel again (if your CWM kernel during nandroid backup was ICS or lower, then phone won't boot without this step)
8. reboot
Some other Kobridge's Tweaked ROM info:
When many apk files are updated or if you flashed new Kobridge's stock ROM, remove /data/local/zipalignedapk file and reboot. It will try to re-zipalign all apks from /preload /system/app /data/app.
Removed apks are placed in /storage/extSdCard/Removed_Apps/ (from system/app) and /storage/extSdCard/Removed_Apps/preload (from preload/symlink/system/app). /storage/extSdCard folder is a symbolic link of /mnt/extSdCard.
To move the removed apps back to original folder, you have to copy(move) the apk files from Removed_Apps folders to /system/app folder and change the permision to 644 and reboot. You cannot move the apk files back to /preload folder because the symbolic link is not there. To move it to preload folder, you have to manually create the symlink for the move files.
If you do not want to use Kobridge Tweak, remove the init.d folder and /system/bin/dvfs.sh file. For build.prop, copy it from original stock rom and place it to /system folder.
To check the tweak result, find /data/log/kobridge_tweakxx.log files (total 4 files created)
Again, I do not use 'data wipe'. From ICS to JB, everything moved ok and working fine for me.
On the same CWM recovery session, you can flash the ROM, Modem, and bloatware remover script also. But be sure that you need to wait enough time until system reboot and settle. After flashing the ROM, you may need to wait about upto 5 minutes. If you removed alignedapk file and doing the re-zipalign, then it would also take 3-5 minutes.

Kobridge Tweak Pack vJB4.2
From this version, I do not include my Kobridge tweaks into stock rom. So, if you want to add Kobridge Tweaks into this ROM, you need to flash the separate zip file (I want to give you the option that you could use any tweaks from anyone).
**only recommend to use on pure stock JB Kernel**
a. Kobridge Tweak v4.2SF - Mirror
b. Kobridge Tweak v4.2F - Mirror
c. Kobridge Tweak v4.2M - Mirror
d. Kobridge Tweak v4.2A - Mirror
e. Go back to stock default and remove the tweaks installed by Kobridge Tweak pack - download
Kobridge's Silent Camera Mod
Four different flashable zip files available for Camera apk. If you use the CSC tweak, then you will only have one option to turn on or off the shutter sound.
1. Kobridge_Silent_Camera_vFL16.2.zip - download
Features:
No Sounds -Camera shutter, focus, click, Cam start, stop, record
No Charger connection sound
No PowerOn sound
No Shutdown sound
2. Kobridge_Silent_Camera_vFL16.3a.zip - this version is the combination of vFL16.2 and vFL16.3b. - download
Features:
No CSC required
Enabled shutter sound on off option
Most Camera & Camcoder sounds removed in Camera apk itself and system ui folder
power key to take the photo (if power key is press shortly, then it goes to screen off mode. So, press it a little longer. When the picture is taken, device option menu also showed up. Need to click 'back' key to remove the device option menu)
Removed low battery alerts from Camera and Camcoder. Enabled taking pictures and recording in low battery
Able to take pictures or recording during the call
Able to use flash in low battery
All features of vFL16.2
3. Kobridge_Silent_Camera_vFL16.3b.zip - changes were only made in camera apk. - download
Features:
No CSC required
Enabled shutter sound on off option
Most Camera & Camcoder sounds removed in Camera apk itself and system ui folder
power key to take the photo (if power key is press shortly, then it goes to screen off mode. So, press it a little longer. When the picture is taken, device option menu also showed up. Need to click 'back' key to remove the device option menu)
Removed low battery alerts from Camera and Camcoder. Enabled taking pictures and recording in low battery
Able to take pictures or recording during the call
Able to use flash in low battery
4.Want to go back to stock Camera? No problem - click here
If you flash this zip file, it will remove any changes made from above Camera Mods and you will hear every sounds provided by Stock rom.
Old versions:
Note: VFL16.1 is not stable
Kobridge_Silent_Camera_vFL16.1.zip download here - Mirror
Kobridge's System App Backup & Recovery Tool - Advanced users only
Note: to backup and recover, it takes about 5minutes (little more or less). So, please be patient.
System App Backup from CWM recovery - Kobridge's_sysapp_backup_v1.0.zip - download here - Mirror
System App recovery tool - Kobridge's_sysapp_recover_v1.0.zip - download here - Mirror
Kobridge's CSC Tweak - experience the extended menus and options
Note: If you see that some app or function does not work after flashing CSC tweak, try it to flash again just after flashing the ROM.
Kobridge_CSC_Tweak_v1.1.zip - download here - Mirror
To go back to Stock CSC, download Stock CSC flashable zip file - Kobridge_Stock_CSC_FL16.zip - download
Old version:
Kobridge_CSC_Tweak_v1.0.zip - download here - Mirror
Kobridge's SystemUI mod - enabled all 20 stock QuickSetting (togglebar)
Note: MultiWindow and AllShareCast are not displayed because of the phone's configuration.
** SystemUI.apk still stays in /preload partition.
** Few screenshots available at post#306 - here
1. Kobridge_Stock_FullQuickPanelSetting_vFL16.0 - Enabled all Stock Quick Panel (Toggle bar) items - download
2. Kobridge_SystemUI_Mod_vFL16.0 - FullQuickPanelSetting + battery, wifi, Signal bar mod - download
3. Go back to stock SystemUI (into Preload partition) - download
Tdunham's Mods collections for FL16 (deodexed ROM only)
Extended toggles and addons - Click here
All-in-one mod - check here
This mod includes Music Skip Mod, Back to Kill Mod, Ripple Lockscreen, Aosp Toggle, Extended Restart Menu
Call Recorder Mod - check here
Centered Clock Mod - check here
Format all X2 - works for both odexed and deodexed because it's formatting all!
FL16 - 1x/3G Mod - here
Hosts Ad Blocking - here - works on both odexed & deodexed
Settings Addon - here
Power Menu Mod - here
Battery Life in JB ROM - 12/22/12 - this information is subject to change.
So far, what I've found on JB rom is, there are lots of wakup locks comparing with ICS and GB. I think one of the reason why is, I never saw any wifi connection issue on JB rom whenever the screen turned on from deep sleep(?). From the ICS rom, we've seen lots of wifi wakeup failures but I've not seen this from JB.
So for overall, the battery life in JB is worst comparing with ICS or GB. For me, it's less than half of my ICS battery life. I'm still trying to figure out to make the battery life better on JB.
Update 12/23/12
I removed lots of wakeups but
Still not happy with battery life personally. Below three screenshots with 4.2A mode. A little fast battery consumption comparing with in ICS. (I'll test this again after my new battery arrives 1800mA)
Update 01/11/12 - with new battery
Finally got new 1800mA battery and measured battery life during one full charge cycle.
The battery life is much better than before comparing with my old battery.
Battery life shows in screenshots below starting from 4th and it's based on -
FL16 Stock deodexed, fl16 stock kernel/modem, no tweaks but some app level tweaks to reduce the battery consumption. Some of the apps are showed in screenshots and percentages being used.
Update 01/14/12
Finished the second life cycle of new battery. For overall, battery life is great even without the tweaks. I like this ROM!
The screenshots are available at http://forum.xda-developers.com/showthread.php?t=2059714&page=42
What's next? Battery life after applying the Kobridge Tweak Modes.

What's new on FL16?
Toggle bar moves - 'sync' option added into toggle bar (screenshot #2)
Telenav still does not work on FL16 odex version - once after open the app, it goes directly google market and update the app. But it's FC'd. - fixed on current version
vtt-sprint.apk removed from symlink
Connection Optimizer name changed from ConnectionManager.apk to ConnectionManager-wimax.apk
USB Mass Storage connection option is gone from Settings. Nowhere to find it.
Trick - download 'USB mode switch for SGS1 on CM (usb switch). This one always worked for me on any rom whenever I had an issue on mounting USB storage as mass storage. (screenshot #3&4)
Settings > Application manager - 'ON SD CARD' tab added
Internet browser force closing on different DPI (200)
Exchange service - whenever wifi sleep policy is set the 'never' (turn off wifi during the sleep)', it uses most of CPU and makes the phone unable to sleep! When the policy is set to 'always wifi turned on' then, phone sleeps better! Something wrong with connection optimizer. If you do not use exchange email, then freeze this service along with email app

First!
Thank you Kobridge
I hope those tweaks turn out well :fingerscrossed:

looks like your knocking this out. 2nd.
EDIT: looks very nice.

Yipes! Excellent. Watching closely.
Sent from my SPH-D710 using Tapatalk 2

Downloading now, how are wimax speeds looking kobridge? I've only been getting 1.2Mb max on cm9/10 compared to 10+ on stock el26
Edit: Pulled 5.4 up last night, not bad! BTW for anyone wondering about 4g tethering, try the latest beta of the app Wifi Tether for Root Users from their project site (the market version wouldn't connect and every other app dropped to 3g)

It worked.
El26 for wipe and modem and rom and bloat away

What is this I see......Kobridge is at it again :thumbup:
Sent from my SPH-D710 using Tapatalk 2

Strange it shows phone is sleeping while screen is on
Touchwiz home has stopped twice
And everything in my folder disappeared
And is turbo scroll back?

I have a question. How are you managing to deodex the services.odex file??? Everytime I try to deodex this Stock ROM this is the only part that errors out and will not deodex. All the rest of the framework and apk's deodex just fine. The error I get is as follows:
NOW AT FILE 40 OF 44 IN system/framework: services.odex
Disassembling services.odex ...
java -Xmx512m -jar baksmali.jar -a 15 -d ../framework -x services.odex
Error while disassembling method Lcom/android/server/enterprise/email/EmailPolicy$EmailBroadcastReceiver;->onReceive(Landroid/content/Context;Landroid/content/IntentV. Continuing.
org.jf.dexlib.Code.Analysis.ValidationException: class Landroid/app/enterprise/IEmailPolicy$Stub; cannot be resolved.
at org.jf.dexlib.Code.Analysis.ClassPath$UnresolvedClassDef.unresolvedValidationException(ClassPath.java:536)
at org.jf.dexlib.Code.Analysis.ClassPath$UnresolvedClassDef.getSuperclass(ClassPath.java:540)
at org.jf.dexlib.Code.Analysis.DeodexUtil.parseAndResolveMethod(DeodexUtil.java:212)
at org.jf.dexlib.Code.Analysis.DeodexUtil.lookupVirtualMethod(DeodexUtil.java:103)
at org.jf.dexlib.Code.Analysis.MethodAnalyzer.analyzeInvokeVirtualQuick(MethodAnalyzer.java:3640)
at org.jf.dexlib.Code.Analysis.MethodAnalyzer.analyzeInstruction(MethodAnalyzer.java:1106)
at org.jf.dexlib.Code.Analysis.MethodAnalyzer.analyze(MethodAnalyzer.java:213)
at org.jf.baksmali.Adaptors.MethodDefinition.addAnalyzedInstructionMethodItems(MethodDefinition.java:389)
at org.jf.baksmali.Adaptors.MethodDefinition.getMethodItems(MethodDefinition.java:311)
at org.jf.baksmali.Adaptors.MethodDefinition.writeTo(MethodDefinition.java:132)
at org.jf.baksmali.Adaptors.ClassDefinition.writeMethods(ClassDefinition.java:338)
at org.jf.baksmali.Adaptors.ClassDefinition.writeVirtualMethods(ClassDefinition.java:310)
at org.jf.baksmali.Adaptors.ClassDefinition.writeTo(ClassDefinition.java:117)
at org.jf.baksmali.baksmali.disassembleDexFile(baksmali.java:186)
at org.jf.baksmali.main.main(main.java:308)
opcode: invoke-virtual-quick
CodeAddress: 8
Method: Lcom/android/server/enterprise/email/EmailPolicy$EmailBroadcastReceiver;->onReceive(Landroid/content/Context;Landroid/content/IntentV
ERROR: Aborting services.odex
I'm clueless. How do i fix this error??? Please note that I am using dsixda's kitchen tools in linux to complete task.

Launcher keeps force closing also. kinda just freezes at times >_>

Couldn't you dial ##diag# to switch the usb mode?
Sent from my SPH-D710 using Tapatalk 2

Is it possible to make a tar of the decodexed rooted file?

Works perfectly! Thanks kobridge!
Sent from my SPH-D710 using Tapatalk 2

Is there a way to remove the tweaks in case we decide to back to stock settings?
Sent from my SPH-D710 using Tapatalk 2

StoverA said:
I have a question. How are you managing to deodex the services.odex file??? Everytime I try to deodex this Stock ROM this is the only part that errors out and will not deodex. All the rest of the framework and apk's deodex just fine. The error I get is as follows:
NOW AT FILE 40 OF 44 IN system/framework: services.odex
Disassembling services.odex ...
java -Xmx512m -jar baksmali.jar -a 15 -d ../framework -x services.odex
Error while disassembling method Lcom/android/server/enterprise/email/EmailPolicy$EmailBroadcastReceiver;->onReceive(Landroid/content/Context;Landroid/content/IntentV. Continuing.
org.jf.dexlib.Code.Analysis.ValidationException: class Landroid/app/enterprise/IEmailPolicy$Stub; cannot be resolved.
at org.jf.dexlib.Code.Analysis.ClassPath$UnresolvedClassDef.unresolvedValidationException(ClassPath.java:536)
at org.jf.dexlib.Code.Analysis.ClassPath$UnresolvedClassDef.getSuperclass(ClassPath.java:540)
at org.jf.dexlib.Code.Analysis.DeodexUtil.parseAndResolveMethod(DeodexUtil.java:212)
at org.jf.dexlib.Code.Analysis.DeodexUtil.lookupVirtualMethod(DeodexUtil.java:103)
at org.jf.dexlib.Code.Analysis.MethodAnalyzer.analyzeInvokeVirtualQuick(MethodAnalyzer.java:3640)
at org.jf.dexlib.Code.Analysis.MethodAnalyzer.analyzeInstruction(MethodAnalyzer.java:1106)
at org.jf.dexlib.Code.Analysis.MethodAnalyzer.analyze(MethodAnalyzer.java:213)
at org.jf.baksmali.Adaptors.MethodDefinition.addAnalyzedInstructionMethodItems(MethodDefinition.java:389)
at org.jf.baksmali.Adaptors.MethodDefinition.getMethodItems(MethodDefinition.java:311)
at org.jf.baksmali.Adaptors.MethodDefinition.writeTo(MethodDefinition.java:132)
at org.jf.baksmali.Adaptors.ClassDefinition.writeMethods(ClassDefinition.java:338)
at org.jf.baksmali.Adaptors.ClassDefinition.writeVirtualMethods(ClassDefinition.java:310)
at org.jf.baksmali.Adaptors.ClassDefinition.writeTo(ClassDefinition.java:117)
at org.jf.baksmali.baksmali.disassembleDexFile(baksmali.java:186)
at org.jf.baksmali.main.main(main.java:308)
opcode: invoke-virtual-quick
CodeAddress: 8
Method: Lcom/android/server/enterprise/email/EmailPolicy$EmailBroadcastReceiver;->onReceive(Landroid/content/Context;Landroid/content/IntentV
ERROR: Aborting services.odex
I'm clueless. How do i fix this error??? Please note that I am using dsixda's kitchen tools in linux to complete task.
Click to expand...
Click to collapse
+1 I can't deodex it to save my life!
Sent from my SPH-D710 using xda premium

Usb connect works fine without tweaks
Sent from my SPH-D710 using Tapatalk 2

fredrick1213 said:
Is there a way to remove the tweaks in case we decide to back to stock settings?
Sent from my SPH-D710 using Tapatalk 2
Click to expand...
Click to collapse
The tweak is not included in this ROM. To apply the tweak, you need to manually flash the tweak zip file.
Stryke_the_Orc said:
+1 I can't deodex it to save my life!
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
I'm a novice about deodexing. But what I can tell you is you need to add bootclass path on it.

[AOKP] IceColdJelly421 - 1.6 - JellyBean 4.2.1_r1 : Internal SDCARD not showing up??

Hey Guys,
Being a new person on this forum, I was not able to post on the original thread, so posting here.
I have been on IceColdJelly421 - 1.6 - JellyBean 4.2.1_r1 for last 2 weeks and have found it to be an excellent ROM. However I noticed something very weird today.
My HTC ONE X's (international tegra) SDCARD is gone! when I connect to mac, I can only see my 2.11 GB internal phone storage, same from Settings -> Storage. I tried formatting the SDCARD (~27 GB) from TWN and mac (as FAT) but still it doesnt show up anywhere.
I also tried formatting the SDCARD from settings -> storage page, but that just keeps loading, nothing happens.
Any idea whats wrong here? I tried searching on the forum, but either didnt do a good job on it / didnt get anything
Please help / provide some input.
Update:
1) When I mount USB storage from TWN, i get a message on MAC that disk is not initialized. I format it as FAT from disk utility it works fine but then on reboot, I dont see in Android
2) Again from TWN when I try to format the SDCARD by using Wipe -> External Storage. The log says couldnt load SDCARD or something.
3) when "adb shell", I see my phone internal storage under /sdcard folder. Also I dont see any "0" folder inside my sdcard folder. As I understood from the IceColdJelly421 thread, 4.2.1 onwards, the SDCARD is mounted under 0 folder. But I dont see any.
-Rockingturtle.

Bump ! Any one ?

Have you flashed boot.img between different ROM versions? Because the boot.img in a particular version was bad and it was reverted in the following versions. Can't remember which though.
Try flashing boot from 1.6 for example, or 1.3.1.

I have the following files which I used.
$ md5 boot.img
MD5 (boot.img) = 77b5e63109c54aacca5e783d50cfece4
$ md5 aokp_ICJ421-V1.6.zip
MD5 (aokp_ICJ421-V1.6.zip) = a342a97d8cdbbe3f8f465aa9de809fd5
blackice.omca.co.uk/download/icecoldsandwich/IceColdJelly421 is not opening for me currently, will download again and check.
-Rock

rockingturtle said:
I have the following files which I used.
$ md5 boot.img
MD5 (boot.img) = 77b5e63109c54aacca5e783d50cfece4
$ md5 aokp_ICJ421-V1.6.zip
MD5 (aokp_ICJ421-V1.6.zip) = a342a97d8cdbbe3f8f465aa9de809fd5
blackice.omca.co.uk/download/icecoldsandwich/IceColdJelly421 is not opening for me currently, will download again and check.
-Rock
Click to expand...
Click to collapse
Flashed to another ROM and the problem is gone. Will download the ICJ again / wait for next release and try again.
-Rock

rockingturtle said:
Flashed to another ROM and the problem is gone. Will download the ICJ again / wait for next release and try again.
-Rock
Click to expand...
Click to collapse
Just re install the original recovery and do a factory reset in the bootloader page will erase every thing , then the sd will back again , then flash any recovery you wont.

samooorje said:
Just re install the original recovery and do a factory reset in the bootloader page will erase every thing , then the sd will back again , then flash any recovery you wont.
Click to expand...
Click to collapse
I tried that, but didnt work, the factory reset in TWR failed saying cannot mount /sdcard
When I flashed a different boot.img, TWR was able to mount and format the sdcard. Now I did a re-install of a different ROM (ARHD 18.1) and everything is working fine. Will try with ICJ again shortly. Seems like a lot of folks are reporting issues with 1.7.1.
-Rock

Just installed ICJ 1.7.2 by flashing the ROM from SDCARD, worked like a charm this time, both SDCARD and internal phone memory coming. Facing the following issues with the ROM currently.
1) The battery is draining faster, will let it settle for 1-2 days and then re-check. Will also adjust the brightness level, that helped a lot with 1.6
2) The rotation of home screen is still not working, I dont use that anyways , so no problemo !
3) Noted some disturbance / noise when doing a call in speaker mode. In earphone mode, it was crystal clear.
Thanks "Lord" and all the other team members for this !!

mputeop New
Just installed the 2.0 version from Lord...so far so good Thanks Lord !!
-Rock

Also trouble...
Hi, I'm also having some trouble trying to get to the 2.0.. - looking forward to it, Lord
(btw I have searched, but it's too much info to comprehend)
**1**
AFAIK I need to update my hboot (currently 0.95) and I installed the original backup (clean One X from HTC) and was trying the OTA update, but I get an error where recovery can't find the path ( "[E:...]")
Does it need original recovery?
**2**
Also when I'm trying to use the mv * ../ commands I get this:
mv can't rename '.': Device or resource busy
I'm not that experienced with the cmd/terminal stuff, so I can't really debug on my own yet :/
What does this error mean and how to fix it?
Thanks!

bjornops said:
Hi, I'm also having some trouble trying to get to the 2.0.. - looking forward to it, Lord
(btw I have searched, but it's too much info to comprehend)
**1**
AFAIK I need to update my hboot (currently 0.95) and I installed the original backup (clean One X from HTC) and was trying the OTA update, but I get an error where recovery can't find the path ( "[E:...]")
Does it need original recovery?
**2**
Also when I'm trying to use the mv * ../ commands I get this:
mv can't rename '.': Device or resource busy
I'm not that experienced with the cmd/terminal stuff, so I can't really debug on my own yet :/
What does this error mean and how to fix it?
Thanks!
Click to expand...
Click to collapse
#1 Yes, I have also faced this problem, the best is to restore HTC's stock ROM and recovery (this is important, as custom recoveries dont work) and then update. You can find the orignal recovery in the threads. People have posted them
#2 Did you follow the exact steps of booting into fastboot, adb shell and execute the commands from there? You might want to try a different boot.img for this. I used ARHD boot.img to do the changes and then got back to ICJ. I had to change my boot.img, because the ICJ was not showing my SDCARD at all.
Let me know if this helped.
-Rock

BTW on 2.1 ICJ now and loving it. I am facing some wifi, GPS issues. But that might be just because of my router (for wifi, as I had trouble connecting to my wifi even from mac, restart of router did the trick), for GPS / Signal, I noted low signal from carrier, so will wait for few more days.
Also noted that my soft keys are often skipping. The home button needs to be clicked twice at times. But in general and overall a very good ROM.
Thanks L0rd !!!
-Rock

Facing the following issues with 2.1:
1) The GPS fixing is taking a lot of time. I remember at office, I usually get a fix very quickly, but taking time now.
2) Post playing games (subway surfer), the device gets heated a lot specially around the camera area. This is draining the battery a bit.
3) Still loosing battery a bit faster than it did earlier.
4) The home button / associated vibrations dont register at times and I need to try them again. Also noted in subway surfer that game play is a bit jerky and some of my swipes are not registered. This might be due to any off: ROM, Kernel, Game, a poor screen guard.
Trying to get some data (logs etc) to substantiate the above observations. Might shift to ARHD for sometime to compare the data and provide better inputs.
-Rock

Installed ARHD, details captured here:
http://forum.xda-developers.com/showpost.php?p=38487569&postcount=39640

Yeah, I troubled the guys in their main thread after the HTC RUU exe surpriced me by erasing my SDcard, and mattoffshore gave me this link to a simple flashing tool: http://www.mediafire.com/?oik6tjvo28r9d
it worked out nicely, hboot 1.39 on .401. HTC__Y13 (tags for other unfortunate searchers)
ICJ 2.1 :good: until the next release any day now haven't had any big issues except a few camera FC and random hot reboots
-bjornops

XOLO Q1000 ROM [4.2.1] Stock Modified

Note: This ROM is a Modified Stock ROM 4.2.1 with a few apps added and other features. Check below.
Based on Build : XOLO_Q1000_S101_130607
Friends, this CWM flashable ROM provides stock experience only with certain useful features and tweaks, no major UI changes have been done. It maybe useful for those who’ll are having problems rooting.
Stock kernel has been used.
Download link:
XOLO Q1000_mj
Features:
- Rooted( SuperSU is used)
- Deodexed.
- Busybox added.
- Init.d support(Some tweaks added )
- Few Build.prop tweaks.
- Custom bootanimation enabled ( You can add your ‘bootanimation.zip’ to ‘data/local’ folder)
- Bash shell support.
- Ubuntu fonts used.
- Percentage Battery icon.
- Beats Audio added.
- Your external Micro-sd card will be detected as ‘Phone Storage’( This solves the problem for certain games.)
Apps Added:
- Walkman Music Player and Volume+ equalizer app(Full Credits: @mahfoozceecy)Thank You very much!
- Holo Launcher.
- ReScan SD
- QuickPic
- Mobo Player
- LG Camera and others.
Flash it at your own risk
IMPORTANT PLEASE NOTE:
In order to avoid bootlooping issues, before flashing out the zip file, perform these steps:
(1) Remove the boot.img and meta-inf folder from that zip file..
(2) Then download this new meta-inf folder link-------------->https://drive.google.com/file/d/0B7kpQGwEs84ed0tKV1hZaC1wNmc/edit?usp=sharing
(3) Extract the meta-inf.zip. Put this new meta-inf folder inside the XOLO Q1000_mj ROM zip file .
(4) Follow instructions written below for clearing out your phone.
Now simply flash the ROM!
Extremely Sorry for inconvenience!
INSTRUCTIONS:
(1) Backup anything you want and go to CWM Recovery. This ROM will wipe your data.
(2) Wipe out everything:
- Factory reset
- Mounts and Storage/Format system.
- Again go to Advanced/Wipe Dalvik cache,battery stats.
This will make your phone into clean state.
(3) Install Zip from sdcard/choose zip file and reboot.
Credits:-
Thank these people if you want :
@mahfoozceecy
Android kitchen
UOT Kitchen

How You get 20Gb free ? in phone storage ?

External sd card is detected as phone storage and vice versa

Then Its Super Coool ..
Can You Mode Miui v5 Rom for this Future ?

Miui ROM v5 has already been uploaded for xolo q1000 and it works as well.

m_jani said:
Miui ROM v5 has already been uploaded for xolo q1000 and it works as well.
Click to expand...
Click to collapse
No bro i m saying can you add this future Your external Micro-sd card will be detected as ‘Phone Storage’( This solves the problem for certain games.)
In miui v 5.

Change the mount lines.
Change the values in(highlighted in yellow):
dev_mount sdcard--------------Change the sdcard0 to sdcard1 & '1' to '0'
dev_mount left_sdcard---------Change the sdcard1 to sdcard2 & '2' to '1'
Image link

m_jani said:
Change the values in(highlighted in yellow):
dev_mount sdcard--------------Change the sdcard0 to sdcard1 & '1' to '0'
dev_mount left_sdcard---------Change the sdcard1 to sdcard2 & '2' to '1'
Image link
Click to expand...
Click to collapse
I have to edit from pc then replace via root explorer and restart ?

Go to system/etc folder using some file manager with root explorer enabled.....and change the values as i have explained in the previous post

m_jani said:
Go to system/etc folder using some file manager with root explorer enabled.....and change the values as i have explained in the previous post
Click to expand...
Click to collapse
Thanks For fast and good reply
Thanks Hited
I have DOne Successfully But i m not able to install Apps in Phone storage (memory card)

greenlight093 said:
Thanks For fast and good reply
Thanks Hited
I have DOne Successfully But i m not able to install Apps in Phone storage (memory card)
Click to expand...
Click to collapse
Go to Settings/Storage....................select your 'default write disk' option and try.

m_jani said:
Go to Settings/Storage....................select your 'default write disk' option and try.
Click to expand...
Click to collapse
This option not available in miui v 5

It might be somewhere in settings idk exactly....m nt using miui rite now......ask miui porter maybe he can help

m_jani said:
Note: This ROM is a Modified Stock ROM 4.2.1 with a few apps added and other features. Check below.
Based on Build : XOLO_Q1000_S101_130607
Friends, this CWM flashable ROM provides stock experience only with certain useful features and tweaks, no major UI changes have been done. It maybe useful for those who’ll are having problems rooting.
Stock kernel has been used.
Download link:
XOLO Q1000_mj
(Note: Click on 'File' on top-left of the webpage and click 'Download')
Features:
- Rooted( SuperSU is used)
- Deodexed.
- Busybox added.
- Init.d support(Some tweaks added )
- Few Build.prop tweaks.
- Custom bootanimation enabled ( You can add your ‘bootanimation.zip’ to ‘data/local’ folder)
- Bash shell support.
- Ubuntu fonts used.
- Percentage Battery icon.
- Beats Audio added.
- Your external Micro-sd card will be detected as ‘Phone Storage’( This solves the problem for certain games.)
Apps Added:
- Walkman Music Player and Volume+ equalizer app(Full Credits: @mahfoozceecy)Thank You very much!
- Holo Launcher.
- ReScan SD
- QuickPic
- Mobo Player
- LG Camera and others.
Flash it at your own risk
For those who are having problems related to boot issue, please make sure you have proper CWM Recovery installed. For that you can use SP Flash Tool:
SP Flash Tool folder, boot.img ,scatter file, recovery.img.
Steps:
- Make sure you have all drivers installed i.e. MTK6589 Drivers x86-DroidDict(link) and VCOM drivers(link) installed. Click on 'File' on top-left of the webpage and click 'Download'.
- Click on Flash_tool
- Click on Scatter-loading and select the file 'MT6589_Android_scatter_emmc'
- You will see 'BOOTIMG' & 'RECOVERY' has been selected. Make sure its the one present in the same folder where the 'scatter' file has been placed.
- Switch OFF your phone completely,remove the battery and re-insert it.
- Connect your XOLO Q1000 to the computer.
- Click on 'Download' button and you will see your phone being detected and the flash process will start.
- You will be confirmed when its done with the Green circle.
- Now, keep Volume up+Power button on your phone pressed nad in a few seconds you will get your CWM Recovery screen. Then flash this ROM.
INSTRUCTIONS:
(1) Backup anything you want and go to CWM Recovery. This ROM will wipe your data.
(2) Wipe out everything:
- Factory reset
- Mounts and Storage/Format system.
- Again go to Advanced/Wipe Dalvik cache,battery stats.
This will make your phone into clean state.
(3) Install Zip from sdcard/choose zip file and reboot.
Credits:-
Thank these people if you want :
@mahfoozceecy
Android kitchen
UOT Kitchen
Click to expand...
Click to collapse
Not Working...After flashing this ROM , bootlooping starts!! Can you post the original stock ROM without any tweaks that can be flashed through the CWM directly not by sp flash tool?

See you will have to flash boot.img and recovery.img from this thread.....using spflash tools scatter file method......only these three files you will hve to flash..... then install the rom zip.....m sure it will work 100%....do reply if any probs

arkaredevil said:
Not Working...After flashing this ROM , bootlooping starts!! Can you post the original stock ROM without any tweaks that can be flashed through the CWM directly not by sp flash tool?
Click to expand...
Click to collapse
Ok, just confirm if you need the stock rom cwm flashable zip?

m_jani said:
Ok, just confirm if you need the stock rom cwm flashable zip?
Click to expand...
Click to collapse
No thnks..problem solved:victory:..u can try MIUI ROM..it's awesome!!

arkaredevil said:
No thnks..problem solved:victory:..u can try MIUI ROM..it's awesome!!
Click to expand...
Click to collapse
Great you must be happy.......I have tried the MIUI ROM by @Javajohn and it worked great. However, am not a fan of MIUI so reverted back to stock based rom!

m_jani said:
Note: This ROM is a Modified Stock ROM 4.2.1 with a few apps added and other features. Check below.
Based on Build : XOLO_Q1000_S101_130607
Friends, this CWM flashable ROM provides stock experience only with certain useful features and tweaks, no major UI changes have been done. It maybe useful for those who’ll are having problems rooting.
Stock kernel has been used.
Download link:
XOLO Q1000_mj
(Note: Click on 'File' on top-left of the webpage and click 'Download')
Features:
- Rooted( SuperSU is used)
- Deodexed.
- Busybox added.
- Init.d support(Some tweaks added )
- Few Build.prop tweaks.
- Custom bootanimation enabled ( You can add your ‘bootanimation.zip’ to ‘data/local’ folder)
- Bash shell support.
- Ubuntu fonts used.
- Percentage Battery icon.
- Beats Audio added.
- Your external Micro-sd card will be detected as ‘Phone Storage’( This solves the problem for certain games.)
Apps Added:
- Walkman Music Player and Volume+ equalizer app(Full Credits: @mahfoozceecy)Thank You very much!
- Holo Launcher.
- ReScan SD
- QuickPic
- Mobo Player
- LG Camera and others.
Flash it at your own risk
For those who are having problems related to boot issue, please make sure you have proper CWM Recovery installed. For that you can use SP Flash Tool:
SP Flash Tool folder, boot.img ,scatter file, recovery.img.
Steps:
- Make sure you have all drivers installed i.e. MTK6589 Drivers x86-DroidDict(link) and VCOM drivers(link) installed. Click on 'File' on top-left of the webpage and click 'Download'.
- Click on Flash_tool
- Click on Scatter-loading and select the file 'MT6589_Android_scatter_emmc'
- You will see 'BOOTIMG' & 'RECOVERY' has been selected. Make sure its the one present in the same folder where the 'scatter' file has been placed.
- Switch OFF your phone completely,remove the battery and re-insert it.
- Connect your XOLO Q1000 to the computer.
- Click on 'Download' button and you will see your phone being detected and the flash process will start.
- You will be confirmed when its done with the Green circle.
- Now, keep Volume up+Power button on your phone pressed nad in a few seconds you will get your CWM Recovery screen. Then flash this ROM.
INSTRUCTIONS:
(1) Backup anything you want and go to CWM Recovery. This ROM will wipe your data.
(2) Wipe out everything:
- Factory reset
- Mounts and Storage/Format system.
- Again go to Advanced/Wipe Dalvik cache,battery stats.
This will make your phone into clean state.
(3) Install Zip from sdcard/choose zip file and reboot.
Credits:-
Thank these people if you want :
@mahfoozceecy
Android kitchen
UOT Kitchen
Click to expand...
Click to collapse
Hey. I already [email protected] the recovery andall.. I ttriedto flash this rROM. But started bootlooping.. WWhat do I do? Please reply fast..

Hey can anyone upload this ROMs stock gallery.apk? Thanks a ton!