Related
Hey guys,
I used to post video reviews on the Nexus S and Galaxy S II forums but now that I've gotten my Galaxy Nexus I will start covering cases and accessories for the device. Today I've got the Diztronic TPU Matte Black Case, which is a simple case that hugs your device and offers a decent level of protection. I definitely like the look and feel, and apart from some minor annoyances, it's a definite winner.
Full review below:
Thanks for the review. A couple of questions...first, is the texture of the matte finish similar to that of a silicone case? I'm not a fan of silicone cases as they do not slide in and out of pockets well and also gather lint easily. Second, about how thick do you think the case is? I am wondering if it the phone will ever fit into a dock with the case on which has me confused as to why they would include the cutout for the 3 contact charging pins...Thanks again!
dgwood12 said:
Thanks for the review. A couple of questions...first, is the texture of the matte finish similar to that of a silicone case? I'm not a fan of silicone cases as they do not slide in and out of pockets well and also gather lint easily. Second, about how thick do you think the case is? I am wondering if it the phone will ever fit into a dock with the case on which has me confused as to why they would include the cutout for the 3 contact charging pins...Thanks again!
Click to expand...
Click to collapse
Hi,
The matte texture is similar but not as 'heavy' as the one on silicone cases, which tend to be sticky and tacky. This case slides in and out of the pocket very easily and as I mentioned, shows no fingerprints or dust collection.
The case is probably about 3 mm thick, perhaps a little less.
I'm sure the case won't fit in a dock, however there may be an alternate usage for the pins, we can only hope so!
nice review, how long did delivery take?
Also, what screen protector are you using?
coleburns said:
nice review, how long did delivery take?
Also, what screen protector are you using?
Click to expand...
Click to collapse
3 days and I am using the included screen protector you get within the package, will get the job done as it is pretty decent but there are better options.
Which screen protectors do you recommend though? I've tried a few here in the uk and they are all ****
I recommend any SGP screenshield. They've got 2 models currently. Sgpstore.com
Sent from my Galaxy Nexus using XDA App
Just another chime in... I've got this case and it works great on the GSM GN. I like the matte finish.
Like others I'm on the lookout for a nicer screen protector. The included one is just a tad small. Would prefer one that is large enough to slide under the edges of the case.
Sent from my Galaxy Nexus using XDA App
Ploone said:
I recommend any SGP screenshield. They've got 2 models currently. Sgpstore.com
Sent from my Galaxy Nexus using XDA App
Click to expand...
Click to collapse
Check out the pics I took of the SGP Ultra Oleophobic.
http://forum.xda-developers.com/showpost.php?p=19900516&postcount=18
Do you think it would be possible to cut out a slot ourselves for the volume rocker?
Does the texture of the case make the phone slippery in your hand? I have a TPU case for my Galaxy Tab 10.1 that appears to be made of the same sort of material and it always would slip through my hands because it was a very hard texture. I ended up getting a high gloss tpu case for that which was a bit more grippy. How would you compare this to a high gloss? Do you think it offers a good amount of grip like high gloss or no?
Probably I'm going to buy this TPU skin, is seems to be actually the best (reading opinions in xda and amazon.com).
But i have a question about the screen protector that comes with te case: do it cover all the screen (or is it like this http://www.youtube.com/watch?v=YdRSRROffO4 ) ??
Thanks
edit: and, the TPU case is not glossy, true?
this fits both the lte and gsm?
My case mate showed tbats a bad idea
Sent from my Galaxy Nexus using xda premium
matteventu said:
Probably I'm going to buy this TPU skin, is seems to be actually the best (reading opinions in xda and amazon.com).
But i have a question about the screen protector that comes with te case: do it cover all the screen (or is it like this http://www.youtube.com/watch?v=YdRSRROffO4 ) ??
Thanks
edit: and, the TPU case is not glossy, true?
Click to expand...
Click to collapse
Add another question: are SURE that the Diztronic perfectly fit the GSM version of the Galaxy Nexus? there is no gap also after some day of use?
And are the volume buttons comfortely to be pushed?? (excuseme if you explain all this answer on the videoreview, but i don't understand talked english ).
Thanks
ot: somenoe know if the "TPU-Cases" reseller (the only one that sell Diztronic cases) on eBay is the official shop of Diztronic™ (formerly TPU-Cases)
??
I have the same case. Very good and a nice complement to the phone.
---------- Post added at 07:42 PM ---------- Previous post was at 07:37 PM ----------
matteventu said:
Probably I'm going to buy this TPU skin, is seems to be actually the best (reading opinions in xda and amazon.com).
But i have a question about the screen protector that comes with te case: do it cover all the screen (or is it like this http://www.youtube.com/watch?v=YdRSRROffO4 ) ??
Thanks
edit: and, the TPU case is not glossy, true?
Click to expand...
Click to collapse
Screen protector that comes with it is smaller than the phone screen. Lets just say that it leaves 1.5 mm all around uncovered. That's why I have ordered another set of separate screen protectors now. But it gets the job done but I am not too happy with it.
Case is and isn't glossy. Sides and back is matte soft touch coating. However the front border of the case is shiny flexible rubber that looks pretty cool and gives it a high end look.
hope this helps.
Ploone said:
I recommend any SGP screenshield. They've got 2 models currently. Sgpstore.com
Sent from my Galaxy Nexus using XDA App
Click to expand...
Click to collapse
I bought the SGP model for the Nexus and it's cut very small, smaller than the ones we include with our cases. I'm still looking for a screen protector that covers the entire display.
---------- Post added at 02:47 PM ---------- Previous post was at 02:46 PM ----------
enaybee said:
I have the same case. Very good and a nice complement to the phone.
---------- Post added at 07:42 PM ---------- Previous post was at 07:37 PM ----------
Screen protector that comes with it is smaller than the phone screen. Lets just say that it leaves 1.5 mm all around uncovered. That's why I have ordered another set of separate screen protectors now. But it gets the job done but I am not too happy with it.
Case is and isn't glossy. Sides and back is matte soft touch coating. However the front border of the case is shiny flexible rubber that looks pretty cool and gives it a high end look.
hope this helps.
Click to expand...
Click to collapse
I've yet to find one that is bigger than ours and I've ordered 3 now. Let me know if you find one.
---------- Post added at 02:47 PM ---------- Previous post was at 02:47 PM ----------
matteventu said:
Add another question: are SURE that the Diztronic perfectly fit the GSM version of the Galaxy Nexus? there is no gap also after some day of use?
And are the volume buttons comfortely to be pushed?? (excuseme if you explain all this answer on the videoreview, but i don't understand talked english ).
Thanks
ot: somenoe know if the "TPU-Cases" reseller (the only one that sell Diztronic cases) on eBay is the official shop of Diztronic™ (formerly TPU-Cases)
??
Click to expand...
Click to collapse
Our eBay user id is: post3rs. I am using our case on the GSM version and it fits perfectly. I find the volume buttons to be extremely easy to press, although 1 customer told me they don't agree. In all honesty it might be one of the easiest volume buttons I've pushed on a TPU case.
OneStepAhead said:
I bought the SGP model for the Nexus and it's cut very small, smaller than the ones we include with our cases. I'm still looking for a screen protector that covers the entire display.
---------- Post added at 02:47 PM ---------- Previous post was at 02:46 PM ----------
I've yet to find one that is bigger than ours and I've ordered 3 now. Let me know if you find one.
---------- Post added at 02:47 PM ---------- Previous post was at 02:47 PM ----------
Our eBay user id is: post3rs. I am using our case on the GSM version and it fits perfectly. I find the volume buttons to be extremely easy to press, although 1 customer told me they don't agree. In all honesty it might be one of the easiest volume buttons I've pushed on a TPU case.
Click to expand...
Click to collapse
Wow, thanks for the official support (I've read on amazon the review of the user that say the volume controls are not easy to press, and your answer to him)
Yes, I bougth the case from you, post3rs, it has shipped to italy today (I'm a.delu.59).
Now I'm more happy than before to bought the Diztronic case
I have this TPU case and I like it. The only thing I don't care for most of the TPU cases is while the power button is open, the volume rocker is not, so the case gets in the way somewhat. Now I guess I could get out my xacto knife and engineer my own solution but that's not the point LOL.
I started using the toughcase I got last week since I'm a little concerned there isn't enough TPU material to protect the phone? But...it's definitely thin and unobtrusive and feels good in the hand and it also doesn't block any of the ports. It also doesn't attract dust or pocket lint like a magnet like the toughcase silicone. There are tradeoffs for anything I guess.
I bought this case too, from Amazon, though in the smoke translucent matte version.
http://www.amazon.com/Diztronic-Tra...UTFO/ref=sr_1_1?ie=UTF8&qid=1323792395&sr=8-1
It fits great. It's not loose at all, even though it's on a GSM version. You can read my review on that site.
I'm a bit finicky with my phones though, so I don't put it in my pocket. Too high a chance for lint/scratches otherwise, though scratches would be unlikely given the protection now. Finding a belt clip pouch to fit though was difficult. Especially for the phone with the TPU case on it! Finally got the largest one available at Verizon to work, though you really have to shove it in.
The provided screen protector is missing maybe a millimeter from either side, FYI.
Hi OneStepAhead, Are you going to have the glossy ones up on your ebay page soon also? I tried ordering from Amazon.com but they won't ship to Canada for some reason.
Best S2 case going imo
http://droid-den.com/accessory-reviews/samsung-galaxy-sii-official-mesh-case-review/
I've had one of these since I got the phone (4 months?) - the plastic doesn't last long at all - it's broken off where it's thin above the power button and cracked down that side of the case.
Other than the lack of durability, it's a really nice case...
Have you dropped it to cause it to fall off? Mine is ok?
It's had a few minor knocks - but nothing I'd expect to cause it to break. The plastic seems really brittle, and once a crack start it 'runs' so big lumps split off
Maybe mines from a bad batch or something, I don't know...
Really nice case, but mine has done the same.
top left and top right are weak and have cracked.
But I'll replace it with the same one.
i have had 2 of these cases now both have broke pretty quickly, more sacrificial protection than a case.
No protection for the bottom/top or the corners so pretty terrible case in that regard. It seems to be made only to protect the camera lens.
I got the Zenus Air Jacket Monochrome and it looks awesome with minimal bulk. Probably my favourite case purchased to date.
i bought it 2-3month ago, and it breaks. i like this case though, but still, it can break easily, dunno why
I'm from sri lanka. can I get down one here
As regards looks this case beats them all it looks exceptionally cool, i wouldn't personally bother paying big money for a fancy tough case as im very careful with the phone and this offers basic protection and for the little money it costs it really is highly recommended
---------- Post added at 12:22 AM ---------- Previous post was at 12:20 AM ----------
eranda84 said:
I'm from sri lanka. can I get down one here
Click to expand...
Click to collapse
Try Amazon they might deliver to Sri Lanka
http://www.amazon.co.uk/Samsung-Gal...42QU/ref=sr_1_1?ie=UTF8&qid=1324678894&sr=8-1
https://www.youtube.com/watch?v=9btuCFwsiVc&feature=youtube_gdata_player
Vid not great, low light, but hey...
kpkimmel said:
https://www.youtube.com/watch?v=9btuCFwsiVc&feature=youtube_gdata_player
Vid not great, low light, but hey...
Click to expand...
Click to collapse
Pretty nice, I liked your vid.
I'll be buying one of each.
I wanted that case but it's a bit pricey being that there are no card slots. I went with this one.
http://www.ebay.com/itm/32091617969...:IT&_trksid=p3984.m1423.l2649#ht_12159wt_1037
If anyone looking for some nice flip cover cases and willing to spend 60$ check out the link
http://zenuscaseusa.com/galaxy-s3-leather-case-masstige-leather-heritage-diary-series.html
Sent from my SPH-D700 using XDA Premium App
Nice case, something to consider, I need to look at the pros and cons.
Extra steps to receive calls like opening the cover, viewing who is calling, press answer, close cover, talk.
where they selling the case in the video? its back ordered on samsung.com and some other sites? tia.
mankoorb said:
where they selling the case in the video? its back ordered on samsung.com and some other sites? tia.
Click to expand...
Click to collapse
I picked up one yesterday from my local at& t store. Its $50 but had a 25% coupon.
I really like the case so far.
Sent from my SAMSUNG-SGH-I747 using xda premium
I think it looks great "closed". Not sure how I feel about it once you have to flip it around the back once opened and in use. It doesn't sit flush like it does when it's closed.
Maybe I'm just nitpicking but I like the sleekness of the phone and don't care to add anything to it. Think I'll opt for the Samsung ultra slim cover.
http://www.samsung.com/us/mobile/cell-phones-accessories/ETC-2PKSCEGSTA
I love this case!!!!
i like to flip the cover over, so I can grip on to it...doesn't feel like it'll slip out of my hand and increases my grip on the phone
I am left handed, so I just hook the bottom part in my thumb where it attaches on the side and makes a great way to hold it
---------- Post added at 08:39 PM ---------- Previous post was at 08:36 PM ----------
also, the battery cover part is slightly thicker so it comes up over the camera lens, so you dont have to worry about scratching it when putting it on a table
This review is quick and dirty. I was lucky to receive a case from DBA Cases. I didn't think I'd like the case, but I was wrong. There is no bulk and the Thin Grip resolves the slippery phone issue. This case is now my daily. Keep an eye out for a chance to win a DBA Cases Just Like Glass Screen Protector! It's my next XDA exclusive giveaway.
For bigger pictures check out: chrismchoi.blogspot.com
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The case is made with the same material found in bullet resistant glass and materials in a F22 Fighter Jet cockpit. I questioned this, but with a little bit of flexing, it was there. The cuts and finish are next to flawless. One of the best I've seen so far. The case does lock in place, so you don't have to worry about it falling offer like other cases.
There is enough room for the edges to keep the screen off the surface you put it down on. You can see that the button cut outs are very generous and easy to use. I would have prefer the logo be on the inside for a cleaner look, but that's just my preference. The soft finish seems to hold up. Hopefully it doesn't peel like other cases.
Using "Olympics" on your order will give you 20% off!
This is one case that I am adding to my personal collection. I'm really like how thin the case is. It's not as flimsy as the Feather cases. I don't see it cracking like they do.
The case is $21.99 at DBA Cases. It is available in Black, Blue Slate, Maroon, Silver and Snow.
DBA Cases also offers an impressive screen protector. Just Like Glass
Facebook - DBA Cases
YouTube - DBA Cases Just Like Glass
To win the DBA Cases Just Like Glass Screen protector, go to my blog and comment on the post. I will randomly select one winner. I did not post the giveaway anywhere else!
Hit thanks if you found this review useful.
How, if at all, does the case limit our choice of screen protectors?
RebDovid said:
How, if at all, does the case limit our choice of screen protectors?
Click to expand...
Click to collapse
I have a Curved Crystal on it now. Should be fine. The edges cover up right around the bezel. It may push up some wet application types depending on how close they are.
The Curved Crystal is a bit flimsy and covers up to the edge. So I feel most will fit fine.
chrischoi said:
I have a Curved Crystal on it now. Should be fine. The edges cover up right around the bezel. It may push up some wet application types depending on how close they are.
The Curved Crystal is a bit flimsy and covers up to the edge. So I feel most will fit fine.
Click to expand...
Click to collapse
Discount code isnt working.
maniac2k said:
Discount code isnt working.
Click to expand...
Click to collapse
Did you try it with a capital O?
Yes, Olympics. Says its no good. Did you try it?
Discount Code
maniac2k said:
Yes, Olympics. Says its no good. Did you try it?
Click to expand...
Click to collapse
It's still good, however one of our programmers broke the site and it's being restored from a back-up right now.
In order to use the code you do have to be registered in the system - buying as a guest won't work.
If you have any concerns or questions you can email [email protected].
Scott
---------- Post added at 02:26 AM ---------- Previous post was at 02:17 AM ----------
SSHGuru said:
It's still good, however one of our programmers broke the site and it's being restored from a back-up right now.
In order to use the code you do have to be registered in the system - buying as a guest won't work.
If you have any concerns or questions you can email [email protected].
Scott
Click to expand...
Click to collapse
Literally after I posted that I was told it was back...
I tested it myself.
Thin Grip Black Black 1 $21.99 $21.99
Sub-Total: $21.99
Flat Rate Shipping: $3.99
Coupon(Olympics): $-4.40
Total: $21.58
Scott
---------- Post added at 02:34 AM ---------- Previous post was at 02:26 AM ----------
Thanks for reviewing our case.
The paint should never peel. We used three layers on it and it covers the entire case - even the inside. I've tried to mark it with my fingernail and it doesn't even mark easily. If it does you can rub it out. We had them done at a special paint factory so get the best coating, they coat the entire case at once - so there are no ridges or inconsistencies.
Most screen protectors should work. We could not have cut the case any further from the glass without having it fall out. It does grab the bezel so there is no way it will fall off accidentally. In fact it takes a bit of effort to get it off (I recommend the bottom first).
It was a very expensive case to make but it's meant to cover a very expensive phone so we didn't take any shortcuts.
If you're interested in our Just Like Glass screen protector we just released a demonstration video - http://www.youtube.com/watch?v=u3oZvd1W5xw&feature=youtu.be
Scott
chrischoi said:
This review is quick and dirty. I was lucky to receive a case from DBA Cases. I didn't think I'd like the case, but I was wrong. There is no bulk and the Thin Grip resolves the slippery phone issue. This case is now my daily. Keep an eye out for a chance to win a DBA Cases Just Like Glass Screen Protector! It's my next XDA exclusive giveaway.
For bigger pictures check out: chrismchoi.blogspot.com
The case is made with the same material found in bullet resistant glass and materials in a F22 Fighter Jet cockpit. I questioned this, but with a little bit of flexing, it was there. The cuts and finish are next to flawless. One of the best I've seen so far. The case does lock in place, so you don't have to worry about it falling offer like other cases.
There is enough room for the edges to keep the screen off the surface you put it down on. You can see that the button cut outs are very generous and easy to use. I would have prefer the logo be on the inside for a cleaner look, but that's just my preference. The soft finish seems to hold up. Hopefully it doesn't peel like other cases.
Using "Olympics" on your order will give you 20% off!
This is one case that I am adding to my personal collection. I'm really like how thin the case is. It's not as flimsy as the Feather cases. I don't see it cracking like they do.
The case is $21.99 at DBA Cases. It is available in Black, Blue Slate, Maroon, Silver and Snow.
DBA Cases also offers an impressive screen protector. Just Like Glass
Facebook - DBA Cases
YouTube - DBA Cases Just Like Glass
To win the DBA Cases Just Like Glass Screen protector, go to my blog and comment on the post. I will randomly select one winner. I did not post the giveaway anywhere else!
Hit thanks if you found this review useful.
Click to expand...
Click to collapse
I really like the look of this case, when laying flat on the table, will the camera hit the table ?
Sshguru,
Will this work with the oem wireless charging back cover?
htcsnap93 said:
I really like the look of this case, when laying flat on the table, will the camera hit the table ?
Click to expand...
Click to collapse
Perfect thickness to keep the camera off the table. Just enough room to keep the screen lifted as well.
Key cut outs are way more than generous.
I love it!
Post a picture when you get it!
Thin Grip v. Ultra?
I'm inclining to the Ultra for greater protection. My wife is undecided between the Ultra and the Thin Grip. In addition to seeing photos with the blue S3, it would be helpful to (1) see side-by-side photos and (2) compare physical specifications.
Relatedly, if we order, when should we expect delivery (to Greater Boston)?
Hi. I'm italian and i want to buy it. Can i buy from the site? And how mch it cost?
Sent from my GT-I9300 using xda app-developers app
RebDovid said:
I'm inclining to the Ultra for greater protection. My wife is undecided between the Ultra and the Thin Grip. In addition to seeing photos with the blue S3, it would be helpful to (1) see side-by-side photos and (2) compare physical specifications.
Relatedly, if we order, when should we expect delivery (to Greater Boston)?
Click to expand...
Click to collapse
Shipping was quick! Only took mine 5 days or so. Not business days. Consecutive days.
Hey, I just ordered the DBA complete ultra; Ill post pictures and a review when I get it
htcsnap93 said:
I really like the look of this case, when laying flat on the table, will the camera hit the table ?
Click to expand...
Click to collapse
For some reason I didn't subscribe to this thread and just saw it.
Both cases protect the camera from touching a table.
Scott
---------- Post added at 05:30 AM ---------- Previous post was at 05:28 AM ----------
maniac2k said:
Sshguru,
Will this work with the oem wireless charging back cover?
Click to expand...
Click to collapse
It was made for the standard Galaxy S III. Honestly I have no idea.... If other cases works with it this should.
---------- Post added at 05:40 AM ---------- Previous post was at 05:30 AM ----------
RebDovid said:
I'm inclining to the Ultra for greater protection. My wife is undecided between the Ultra and the Thin Grip. In addition to seeing photos with the blue S3, it would be helpful to (1) see side-by-side photos and (2) compare physical specifications.
Relatedly, if we order, when should we expect delivery (to Greater Boston)?
Click to expand...
Click to collapse
I had 140 photo's taken just for the white version. I considered doing the blue but then Samsung released another three or four colors. I think the white is the best to show off the true color of the case. There is no way I can put up over 1000 pictures on the site.
We are developing a color chooser so people can see what a combination of TPU color and PC color will look like.
If you need greater protection get the Ultra. It's very light and very nice to hold on to. It also gives you the ability to order for half the price other colors to change the look of the case.
The Thin Grip is for people who don't like cases - after a few days you won't notice you have a case on. It has protection but it's minimal. I actually prefer this type of case myself. However the Ultra turned out so well I carry both of them with me.
The Thin Grip is .4 OZ while the Ultra is about 1 OZ. So we're talking very light.
The Ultra is just a little thicker than the slim grip.
If you pick a color I can take a picture on my fake blue S3. I don't know how close it is to the real color but it's the dummy model used at Verizon. I have only one blue but I do have three whites.
All of the other pictures are on the site. And today Amazon put nearly everything in stock.
Let me know if you have any other questions.
Scott
---------- Post added at 05:44 AM ---------- Previous post was at 05:40 AM ----------
Teflon_ said:
Hi. I'm italian and i want to buy it. Can i buy from the site? And how mch it cost?
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
I believe we have most countries on the site. We have a flat shipping rate for International deliveries of $11.50.
If it doesn't work email [email protected] and we'll add the country.
Also we have a brand new site coming this week which will make it much easier to order internationally hopefully with prices directly from the USPS.
---------- Post added at 05:45 AM ---------- Previous post was at 05:44 AM ----------
T3hBraveBoss said:
Hey, I just ordered the DBA complete ultra; Ill post pictures and a review when I get it
Click to expand...
Click to collapse
The Ultra's would have shipped Friday or Monday at the latest. They all ship from a centrally located fulfillment center so the delivery is quick anywhere in the U.S.
Looking forward to your review!
Scott
---------- Post added at 05:50 AM ---------- Previous post was at 05:45 AM ----------
Teflon_ said:
Hi. I'm italian and i want to buy it. Can i buy from the site? And how mch it cost?
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Interestingly when we first built the site we didn't anticipate international orders.
However since then we've shipped to the UK, Australia, Israel, Canada and a bunch of others I can't remember because it's 6AM here.
The new site will be far more robust when it comes to shipping. However everything will still ship from our fulfillment center. They are very good at getting orders out the door as fast as possible.
Most of our stuff hit Amazon today - I don't know what they charge for international of if it's even set up. I'll look into it.
SSHGuru said:
For some reason I didn't subscribe to this thread and just saw it.
Both cases protect the camera from touching a table.
Scott
---------- Post added at 05:30 AM ---------- Previous post was at 05:28 AM ----------
It was made for the standard Galaxy S III. Honestly I have no idea.... If other cases works with it this should.
---------- Post added at 05:40 AM ---------- Previous post was at 05:30 AM ----------
I had 140 photo's taken just for the white version. I considered doing the blue but then Samsung released another three or four colors. I think the white is the best to show off the true color of the case. There is no way I can put up over 1000 pictures on the site.
We are developing a color chooser so people can see what a combination of TPU color and PC color will look like.
If you need greater protection get the Ultra. It's very light and very nice to hold on to. It also gives you the ability to order for half the price other colors to change the look of the case.
The Thin Grip is for people who don't like cases - after a few days you won't notice you have a case on. It has protection but it's minimal. I actually prefer this type of case myself. However the Ultra turned out so well I carry both of them with me.
The Thin Grip is .4 OZ while the Ultra is about 1 OZ. So we're talking very light.
The Ultra is just a little thicker than the slim grip.
If you pick a color I can take a picture on my fake blue S3. I don't know how close it is to the real color but it's the dummy model used at Verizon. I have only one blue but I do have three whites.
All of the other pictures are on the site. And today Amazon put nearly everything in stock.
Let me know if you have any other questions.
Scott
---------- Post added at 05:44 AM ---------- Previous post was at 05:40 AM ----------
I believe we have most countries on the site. We have a flat shipping rate for International deliveries of $11.50.
If it doesn't work email [email protected] and we'll add the country.
Also we have a brand new site coming this week which will make it much easier to order internationally hopefully with prices directly from the USPS.
---------- Post added at 05:45 AM ---------- Previous post was at 05:44 AM ----------
The Ultra's would have shipped Friday or Monday at the latest. They all ship from a centrally located fulfillment center so the delivery is quick anywhere in the U.S.
Looking forward to your review!
Scott
---------- Post added at 05:50 AM ---------- Previous post was at 05:45 AM ----------
Interestingly when we first built the site we didn't anticipate international orders.
However since then we've shipped to the UK, Australia, Israel, Canada and a bunch of others I can't remember because it's 6AM here.
The new site will be far more robust when it comes to shipping. However everything will still ship from our fulfillment center. They are very good at getting orders out the door as fast as possible.
Most of our stuff hit Amazon today - I don't know what they charge for international of if it's even set up. I'll look into it.
Click to expand...
Click to collapse
I live in Canada haha, hope I get it soon.
Just wished it had dust flaps like the otterbox :/
Sent from my SGH-T999 using xda app-developers app
T3hBraveBoss said:
I live in Canada haha, hope I get it soon.
Just wished it had dust flaps like the otterbox :/
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
I hate those flaps. I don't have nails.
Dust Flaps Stink!
chrischoi said:
I hate those flaps. I don't have nails.
Click to expand...
Click to collapse
I've never met anyone who liked the dust flaps on cases. The first thing I do when I get one is rip them off. My wife does the same, my neighbors the same. I know some companies put them there but honestly most people hate them.
As you can see I'm completely into customer service but I'll say one thing - you won't see any dust flaps on my cases ever!
SSHGuru said:
I've never met anyone who liked the dust flaps on cases. The first thing I do when I get one is rip them off. My wife does the same, my neighbors the same. I know some companies put them there but honestly most people hate them.
As you can see I'm completely into customer service but I'll say one thing - you won't see any dust flaps on my cases ever!
Click to expand...
Click to collapse
Well I like it because it protects sand from seeping in
And can you give me an estimate on shipping time, ordered it Monday and it's shipping to Vancouver bc Canada
Sent from my SGH-T999 using xda app-developers app
T3hBraveBoss said:
Well I like it because it protects sand from seeping in
And can you give me an estimate on shipping time, ordered it Monday and it's shipping to Vancouver bc Canada
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
Every time I ask my fulfillment center that questions they answer 7-10 days no matter where.
It will probably arrive sooner than you think.
My first thread!
I wanted to share this phone case I bought today. I first bought Nilikin shield case but wanted more protection. Then I bought the HTC Double Dip Hardshelll case and liked it, besides the tri-color. I tried spray painting the case by sanding, priming, and coating but I FAILED miserably . I resanded the case and went to a local Wal-mart to try the "dye method" using RIT Dye and acetone. On my way home, I stopped by a Best Buy to see what they had. I wasn't expecting much but there I found it!
Brand: Platinum
Description:
-Matte black, rubberized feeling, most likely polycarbonate underneath
-2 piece snaps together, inner lining feels like velcro
Pros:
-Not bulky (about the same as Double Dip, maybe less)
-Metal Kickstand
-Lip (to protect screen when faced down)
-Does not cover IR/power button
Cons:
-Price ($40)
-Comes with holster which I don't have use for
-Very difficult to remove
More pics!
How I wish for a clear case with a kickstand... This phone looks too good to cover up. A case on this is kind of like Victoria secret models going to Sears' catalog...
Sent from my Evo 3D CDMA using xda app-developers app
I purchased this case yesterday from BestBuy. I like it. No need for the holster, but the case itself is solid and I do like the kickstand.
gk1984 said:
How I wish for a clear case with a kickstand... This phone looks too good to cover up. A case on this is kind of like Victoria secret models going to Sears' catalog...
Sent from my Evo 3D CDMA using xda app-developers app
Click to expand...
Click to collapse
Perhaps something like this might work:
http://www.ebay.com/itm/Clear-S-Sha...l_Phone_Accessory_Bundles&hash=item417227087c
---------- Post added at 03:28 PM ---------- Previous post was at 03:22 PM ----------
kevinrstruck said:
I purchased this case yesterday from BestBuy. I like it. No need for the holster, but the case itself is solid and I do like the kickstand.
Click to expand...
Click to collapse
I believe that is a Seidio Surface case w/kickstand:
http://www.seidioonline.com/htc-one-surface-metal-kickstand-case-black-p/csr3htm7k-bk.htm
The Best Buy "Platinum" products are simply Seidio cases rebranded. I don't understand why this particular Surface case has such a large bump for the kickstand. The previous Surface cases with kickstand for other phones had the kickstand integrated into the case. Here, it looks like Seidio got lazy/is trying to cut costs and took the regular Surface case and then glued or molded a kickstand apparatus to the outside of it (instead of actually integrating the kickstand into the body of the case).
These Platinum cases at Best Buy are actually Seidio's products.
now this is the kind of case i'm after! but seidio's one is so expensive, especially when shipping to Australia!
As soon as I seen this case In this thread I went to best buy lol perfect case and feels great in hand
Sent from my HTC One using xda app-developers app
Was walking out of a store last night and some idiot punk on a skateboard hit me while i was holding my phone. Phone flew out of my hand and landed about 6-10 feet from me on a concrete surface face down then slid or bounced a couple more inches or so.. Picked up the phone and it was all good. Couple scruff marks on the case but other than that, not marks on the phone or the screen.
I yelled at the idiot for skateboarding on the sidewalk and he told to me go "Fu*k" myself, which I thought was about par for the course. I then laughed at him when I noticed his broken nose from hitting my forearm. Told him that was going to hurt for a while. Asked if he need any assistance or if I could call someone for him, he again said F*ck off old man and skated away.
So this case did its job as did my forearm.