I cant seem to find a flashable CWM 6.0.1.1 :crying:
As far as I know there is no CWM 6.0.1.1. Atleast not for the ATT version.
There are other Clockwork mods though, I will list them for you:
Normal Clockwork Recovery: http://download2.clockworkmod.com/recoveries/recovery-clockwork-5.8.4.5-d2att.img
Touch Clockwork Recovery: http://download2.clockworkmod.com/recoveries/recovery-clockwork-touch-5.8.4.5-d2att.img
-- For these two clockwork mods to work they need to be installed in a special way. You must download one of the above, rename the file to recovery.img and put it on your main microSD card or internal memory.
Now, assuming you know how to use ADB,
Open up the cmd prompt and navigate to the ADB folder.
type adb shell
once in the shell type su
then type
dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p18
And here is a link to the TWRP Recovery thread: http://forum.xda-developers.com/showthread.php?t=1793224
I hope this helps.
6.0.1.1 IS available for our gs3...im currently using that myself. Is Rom manager not letting you install it?
Sent from my SAMSUNG-SGH-I747 using xda premium
Does TeamWins recovery work with cyanogemod10 and jellybean roms?
irish.iolar said:
Does TeamWins recovery work with cyanogemod10 and jellybean roms?
Click to expand...
Click to collapse
Yes.
Sent from my Motorola DynaTAC 8000X
mitchdickson said:
Yes.
Sent from my Motorola DynaTAC 8000X
Click to expand...
Click to collapse
Does anyone have a link? Cause goo is down again...
defnow said:
6.0.1.1 IS available for our gs3...im currently using that myself. Is Rom manager not letting you install it?
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
There is no listing for any SGSIII for any carrier. Im with Bell so maybe the build is a tiny bit different?
equlizer said:
There is no listing for any SGSIII for any carrier. Im with Bell so maybe the build is a tiny bit different?
Click to expand...
Click to collapse
I've seen that before. I flashed another ROM and suddenly the S3 started showing up again.
Sent from my SGH-I747 using xda premium
same here.... i donated and it keeps saying there is no 6.0.1.1 touch for my device...
There is no touch version yet.
Sent from my i747 running CM10
Phoneguy589 said:
There is no touch version yet.
Sent from my i747 running CM10
Click to expand...
Click to collapse
There WAS touch, actualy, I have the img file still, and it's runnig on my S3, but I went to the site, and it's gone again.. Are they still working on an update to 6.x of touch also?
Please make sure your information is correct before posting. This is from the ROM manager website. I don't think it gets more official than this.
well, can't upload screenshot. Just google "ROM manager apk" and it will get you to the official page.
mrhaley30705 said:
Please make sure your information is correct before posting. This is from the ROM manager website. I don't think it gets more official than this.
well, can't upload screenshot. Just google "ROM manager apk" and it will get you to the official page.
Click to expand...
Click to collapse
I don't understand where you are going with that? The site, does not have the touch version *anymore* tho it did a few weeks before when i installed it. i was asking if anyone knew of an update in the near future.
Wasn't aimed at you in particular Eatonjb. I just saw a couple conflicting posts offering less than correct info. that's all.
You can b/u to your external sd card with 5.8.4.5. I didnt see that option w/other versions.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Related
Hey folks!!!
Just wondering if anyone works on cwm v6.0.1.0? Or maybe someone could port it? Changelog really impresed me and features are very exciting
Wish I had more knowledge... like a triple more than now
Sent from my Wild(sexy)fire S
Why do we need to???? Our phone is officially supported in CWM,,,,,,,,,,,,,,We will get an official CWMv6 soon
Yes, we just have to wait until the release and well get it without problem
So no need to bother
Sent from my HTC Wildfire S A510e using xda app-developers app
cwm recovery v6
hey what is better to use safe strap or cwm
I've built and installed 6.0 but the only one that installed right was the touch version. Which of course needs re sized and doesn't factory reset
Sent from my Marvelc using Xparent Green Tapatalk 2
Liudvis987 said:
Hey folks!!!
Just wondering if anyone works on cwm v6.0.0.0? Or maybe someone could port it? Changelog really impresed me and features are very exciting
Wish I had more knowledge... like a triple more than now
Sent from my Wild(sexy)fire S
Click to expand...
Click to collapse
we will hae official Cwm v6. I saw it's overview and it's awesome, 20 mb size for backups 4-5x faster restores and much more.
CWM v6 is now availabe for wildfire s
hey
clockworkmod v6 is now available for wildfire s unofficially but u can't install it from hboot to install the lastest CWM v6
you need :
1. terminal emulator
2. recovery file (in attachment download from there)
how to :
1. copy recovery.img into ur sdcard
2. open terminal emulator and type "su"
3. grand the superuser access
4.then type "flash_image recovery /sdcard/recovery.img"
5.congrats your new recovery is installed see your recovery now
I AM NOT RESPONSIBLE FOR ANY DAMAGE OR BRICKING OF YOUR PHONE PLEASE DO IT AT YOUR OWN RISK
Is this confirmed working? ^^^^
Modpunk has a CWM 6.0.0.3 build with his CM9 builds. It works pretty well. There is a Marvel and a Marvelc version.
https://code.google.com/p/cm9-wildfire-s/downloads/list
It's as a PG76IMG that needs to be renamed... Or you can extract it and flash it yourself.
i think i'll wait for the official version for wfs.
arifater said:
i think i'll wait for the official version for wfs.
Click to expand...
Click to collapse
Life's no fun if you don't go unofficial every once in awhile.
Ok modpunk finally did it. I flashed it via terminal emulator and it works perfectly this thread is dead now.
Sent from my Wild(sexy)fire S
its working
arifater said:
i think i'll wait for the official version for wfs.
Click to expand...
Click to collapse
Yes its working fine m also using it
The backups are more light after update !
Ex:
before update size was 480 mo,
after update and redo my backup size is 330 mo .
Sent from my HTC Wildfire S A510e using xda app-developers app
shasher said:
hey
clockworkmod v6 is now available for wildfire s unofficially but u can't install it from hboot to install the lastest cwm v6
you need :
1. Terminal emulator
2. Recovery file (in attachment download from there)
how to :
1. Copy recovery.img into ur sdcard
2. Open terminal emulator and type "su"
3. Grand the superuser access
4.then type "flash_image recovery /sdcard/recovery.img"
5.congrats your new recovery is installed see your recovery now :d:d:d:d
i am not responsible for any damage or bricking of your phone please do it at your own risk
Click to expand...
Click to collapse
Sir, you appear to have mistakenly attached the wrong file.
arifater said:
i think i'll wait for the official version for wfs.
Click to expand...
Click to collapse
Official is just a word. If it goes official, koush will use exactly what modpunk ported..
parasthakur37 said:
*****, that attachment was the twrp recovery. Asshole! >_<
Click to expand...
Click to collapse
You're downloading from the wrong place, go to modpunk's CM9 google-code page.
What are the changes!?
Sent from my Wildfire S A510e using xda premium
parasthakur37 said:
*****, that attachment was the twrp recovery. Asshole! >_<
Click to expand...
Click to collapse
I suggest a rapid readjustment of your attitude and a lot more thought before posting in future. I will not hesitate to remove you from these forums if I see such a post again.
This is not the kind of behaviour we expect from our members.
conantroutman said:
I suggest a rapid readjustment of your attitude and a lot more thought before posting in future. I will not hesitate to remove you from these forums if I see such a post again.
This is not the kind of behaviour we expect from our members.
Click to expand...
Click to collapse
Sorry. :\ But the file I flashed changed my CWM, and installed TWRP. The Guy's A Fraud.
parasthakur37 said:
Sorry. :\ But the file I flashed changed my CWM, and installed TWRP. The Guy's A Fraud.
Click to expand...
Click to collapse
Why you downloading off a random members post when we all know modpunk's work is always released on google code?
I initially rooted with http://downloadandroidrom.com/file/GalaxyS3ATT/rooting/GalaxyS3RootATT.zip that I got from here yesterday but feel like it has been al ittle glitcht.y http://galaxys3root.com/galaxy-s3-root/how-to-root-att-galaxy-s3-sgh-i747/
the newer version is recovery-clockwork-5.8.4.5-d2att sI don't want it to conflict with the old version of CWM or anything it leaves behind. hould I just do it through odin?
the best route would be to flash from rom manager.....and if not, grab the latest from the interwebz and run this from terminal
su
if=/sdcard/ recovery.img of=/dev/block/mmcblk0p18
reboot recovery
hapticxchaos said:
the best route would be to flash from rom manager.....and if not, grab the latest from the interwebz and run this from terminal
su
if=/sdcard/ recovery.img of=/dev/block/mmcblk0p18
reboot recovery
Click to expand...
Click to collapse
Should I use the CWM that I already installed or install the CWM that comes with rom manager (in the drop down menu it only offers galaxy s2...fyi I've always flashed with CWM without ROM manager)?
zetsui said:
I initially rooted with http://downloadandroidrom.com/file/GalaxyS3ATT/rooting/GalaxyS3RootATT.zip that I got from here yesterday but feel like it has been al ittle glitcht.y http://galaxys3root.com/galaxy-s3-root/how-to-root-att-galaxy-s3-sgh-i747/
the newer version is recovery-clockwork-5.8.4.5-d2att sI don't want it to conflict with the old version of CWM or anything it leaves behind. hould I just do it through odin?
Click to expand...
Click to collapse
I just updated CWM through Rom Manager. The latest version is 6.xxxx, and it now reads exSd.
Sent from my SGH-I747 using xda premium
geomax45 said:
I just updated CWM through Rom Manager. The latest version is 6.xxxx, and it now reads exSd.
Sent from my SGH-I747 using xda premium
Click to expand...
Click to collapse
what do you mean "through" rom manager. Did you flash an image through it? Could you provide the link for that image?
OR
Rom Mangaer has an install CWM recovery option...but underneath that option I do not see the Galaxy S3 listed...so what phone did people select?
zetsui said:
what do you mean "through" rom manager. Did you flash an image through it? Could you provide the link for that image?
OR
Rom Mangaer has an install CWM recovery option...but underneath that option I do not see the Galaxy S3 listed...so what phone did people select?
Click to expand...
Click to collapse
The first option in RM is to flash a recovery. Upon pressing that you are given a list of phones. Scroll down to the Samsung GS3 and choose it. It will then flash the recovery within RM.
Sent from my SGH-I747 using xda premium
zetsui said:
.but underneath that option I do not see the Galaxy S3 listed...so what phone did people select?
Click to expand...
Click to collapse
zetsui said:
Should I use the CWM that I already installed or install the CWM that comes with rom manager (in the drop down menu it only offers galaxy s2...fyi I've always flashed with CWM without ROM manager)?
Click to expand...
Click to collapse
Sent from my SGH-I747 using xda premium[/QUOTE]
AhAh! I knew i wasn't crazy... I have the same problem with Rom Manager , it won't show the S3 in the Menu. I tried uninstalling, wiping app data, reinstalling, Nothing, Nada, Niet ...... Let me know if you find a solution to this
I've had issues getting ROM manager to recognize me as a gs3 as well that's why I learned the terminal commands lol
hapticxchaos said:
I've had issues getting ROM manager to recognize me as a gs3 as well that's why I learned the terminal commands lol
Click to expand...
Click to collapse
Anyone find an easier way? And how would you do this through terminal commands? What are the commands
zetsui said:
Anyone find an easier way? And how would you do this through terminal commands? What are the commands
Click to expand...
Click to collapse
Terminal is as easy as the rest. I posted the commands up top, I see you didn't read the whole thread ;p ****, terminal is easier BC you can pick any recovery you want. Besides, it makes u feel like a true dev ;p
cool
I do not have any SG3 as an option to flash. How do i fix this?
geomax45 said:
The first option in RM is to flash a recovery. Upon pressing that you are given a list of phones. Scroll down to the Samsung GS3 and choose it. It will then flash the recovery within RM.
Sent from my SGH-I747 using xda premium
Click to expand...
Click to collapse
hapticxchaos said:
the best route would be to flash from rom manager.....and if not, grab the latest from the interwebz and run this from terminal
su
if=/sdcard/ recovery.img of=/dev/block/mmcblk0p18
reboot recovery
Click to expand...
Click to collapse
Hey my md5 checksum has a mismatch, but I know the files are fine. is there a terminal command to recompile the md5 for a given image?
Also I noticed the new version of CWM has teh option to backup files as TAR, wouldn't that be better since Odin flashes Tar? If you couldn't get into CWM for some reason you can just flash for Odin?
Forgive me if I'm being newb here had my phone for three days after a motorola bravo
Hi,
I just rooted my SIII and than installed CWM Touch Recovery and works fine
I installed the ROM Manager it says it was never installed.
My question is should I have installed CWM Recovery and than install the Touch version or it doesnt matter and something else is wrong?
Thanks.
cuat420 said:
Hi,
I just rooted my SIII and than installed CWM Touch Recovery but it wont autoboot into it and when I installed the ROM Manager it says it was never installed.
However when I use android terminal I can boot into it no problem.
My question is should I have installed CWM Recovery and than install the Touch version or it doesnt matter and something else is wrong?
Thanks.
Click to expand...
Click to collapse
This thread found right below my post will be of the most importance to you involving your current situation with your recovery. If you go to the CWM team website, I have linked here and browse the list of phones you'll find that the touch recovery for the AT&T variant is at 6.0.1.4. Just right click on the version number, (Don't left click as it will come up with a page full of random symbols.) and press save as and save it to the desktop. This is the bare .img file. It will have the full file name but before saving it rename it to; (without quotes) "recovery.img". After that follow the steps in the link below in order to flash it with ADB. (Since the other recommended ways aren't working for you).
I take no credit for what is posted below all credit goes to the author. Be sure to thank him.
http://forum.xda-developers.com/showthread.php?t=1903913
[Howto] Install a Recovery
Sent from my T&K Blessed SGH-I747
jaysoblitzed said:
This thread found right below my post will be of the most importance to you involving your current situation with your recovery. If you go to the CWM team website, I have linked here and browse the list of phones you'll find that the touch recovery for the AT&T variant is at 6.0.1.4. Just right click on the version number, (Don't left click as it will come up with a page full of random symbols.) and press save as and save it to the desktop. This is the bare .img file. It will have the full file name but before saving it rename it to; (without quotes) "recovery.img". After that follow the steps in the link below in order to flash it with ADB. (Since the other recommended ways aren't working for you).
I take no credit for what is posted below all credit goes to the author. Be sure to thank him.
http://forum.xda-developers.com/showthread.php?t=1903913
[Howto] Install a Recovery
Sent from my T&K Blessed SGH-I747
Click to expand...
Click to collapse
Thanks I already installed it the manual way however the Rom Manager doesnt recognize it.
cuat420 said:
Thanks I already installed it the manual way however the Rom Manager doesnt recognize it.
Click to expand...
Click to collapse
ROM manager does not recognize the touch recovery since technically it is still considered experimental. Only the basic volume control recovery is recognized. This goes with saying with the free version of this app installed. I however, am not sure as to whether it recognizes it after upgrading to premium as it is a premium feature of ROM Manager.
Sent from my T&K Blessed SGH-I747
jaysoblitzed said:
ROM manager does not recognize the touch recovery since technically it is still considered experimental. Only the basic volume control recovery is recognized. This goes with saying with the free version of this app installed. I however, am not sure as to whether it recognizes it after upgrading to premium as it is a premium feature of ROM Manager.
Sent from my T&K Blessed SGH-I747
Click to expand...
Click to collapse
Thanks I will try the premium version.
EDIT: no didnt work
cuat420 said:
Thanks I will try the premium version.
EDIT: no didnt work
Click to expand...
Click to collapse
Its alright if it isn't recognized by ROM Manager. As I said it is still considered "experimental" so it isn't supported by the app. I have had the premium version installed and it wouldn't let me flash the CWM-T through the app. Only when I used ADB did I get through. Still says nothing is installed. Just a little glitch on the developer's side if anything. Don't stress about it, once you can boot into your recovery your good.
Sent from my SGH-I747 using xda app-developers app
jaysoblitzed said:
Its alright if it isn't recognized by ROM Manager. As I said it is still considered "experimental" so it isn't supported by the app. I have had the premium version installed and it wouldn't let me flash the CWM-T through the app. Only when I used ADB did I get through. Still says nothing is installed. Just a little glitch on the developer's side if anything. Don't stress about it, once you can boot into your recovery your good.
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
I did a so called "workaround" I installed the regular CWM with the rom manager app than updated to the touch version manually and now the program functions normally
twrp 2.3.0 for the sgh-t989 i cant find anywhere...if someone has a zip file that i can just flash ill give you 50 thanks...lol...every the teanwin website says there is one compatible for our phone...???which doesn't even make sense...lol,,,thanks in advance...
twrp 2.3
phordych05 said:
twrp 2.3.0 for the sgh-t989 i cant find anywhere...if someone has a zip file that i can just flash ill give you 50 thanks...lol...every the teanwin website says there is one compatible for our phone...???which doesn't even make sense...lol,,,thanks in advance...
Click to expand...
Click to collapse
here is the link..
http://forum.xda-developers.com/showthread.php?t=1768742&highlight=twrp
pjt12 said:
here is the link..
http://forum.xda-developers.com/showthread.php?t=1768742&highlight=twrp
Click to expand...
Click to collapse
i just found it...crazy...i like how you can use the space bar now when typing a backup name...i always had to use --- as my spaces...lol...anyway what is that new feature under wipe...android secure...???...why would you want to format that...isn't that where all ur apps go...?
phordych05 said:
twrp 2.3.0 for the sgh-t989 i cant find anywhere...if someone has a zip file that i can just flash ill give you 50 thanks...lol...every the teanwin website says there is one compatible for our phone...???which doesn't even make sense...lol,,,thanks in advance...
Click to expand...
Click to collapse
New version just released this morning. (2.3.1) and works great. Don't use 2.3.0 as there have been issues.
1) Install GooManager from the Play Store
2) Open GooManager and provide root permissions
3) Hit Menu (or the button with the 3 dots on your screen) and then Install OpenRecovery
rahilkalim said:
New version just released this morning. (2.3.1) and works great. Don't use 2.3.0 as there have been issues.
1) Install GooManager from the Play Store
2) Open GooManager and provide root permissions
3) Hit Menu (or the button with the 3 dots on your screen) and then Install OpenRecovery
Click to expand...
Click to collapse
One issue with 2.1.3.0, can't rename backups prior to making them. Could rename them afterwards.
Sent from my SGH-T989 using xda premium
LoopDoGG79 said:
One issue with 2.1.3.0, can't rename backups prior to making them. Could rename them afterwards.
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
Just checked from my end. I'm getting the same bug. It allows me to rename the backup, but there is no response from the keyboard when doing so.
rahilkalim said:
Just checked from my end. I'm getting the same bug. It allows me to rename the backup, but there is no response from the keyboard when doing so.
Click to expand...
Click to collapse
2.3.1.1 fixed this issue.
Sent from my SGH-T989 using xda premium
LoopDoGG79 said:
2.3.1.1 fixed this issue.
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
Absolutely right!!! now its perfect. Thanks for the heads up.
i flashed the rocovery through odin so i can root. can i flash the official CWM recovery over this? would like to stay updated through rom manager if possible. thanks for any help
mike216 said:
i flashed the rocovery through odin so i can root. can i flash the official CWM recovery over this? would like to stay updated through rom manager if possible. thanks for any help
Click to expand...
Click to collapse
If you're rooted you should be able to install rom manager, and then install CWM from there.
Toleraen said:
If you're rooted you should be able to install rom manager, and then install CWM from there.
Click to expand...
Click to collapse
im already on CWM but i want the official through rom manager. i flashed a recoveryimg. from the odin flashable thread
If you install Rom Manager while rooted, go into the app, it should install the official CWM over your current install.
Sent from my SGH-M919 using xda premium
Toleraen said:
If you install Rom Manager while rooted, go into the app, it should install the official CWM over your current install.
Sent from my SGH-M919 using xda premium
Click to expand...
Click to collapse
thanks thats what i was waiting to hear
U should press the thanks button, just sayin.
Sent from my SGH-M919 using xda app-developers app
I still don't see why anyone would rather have CWM over TWRP.... just sayin'
TeknoGodz said:
I still don't see why anyone would rather have CWM over TWRP.... just sayin'
Click to expand...
Click to collapse
I've never used it. What's the advantage of TWRP over CWM?
Sent from my SGH-M919 using xda premium
TeknoGodz said:
I still don't see why anyone would rather have CWM over TWRP.... just sayin'
Click to expand...
Click to collapse
I loved TWRP when I was on the S3, but on the S4 it appears to be too sensitive. When I try to install a zip file and scroll down the list of folder using my finger it will enter that folder i did not pick.
dhonzik said:
I loved TWRP when I was on the S3, but on the S4 it appears to be too sensitive. When I try to install a zip file and scroll down the list of folder using my finger it will enter that folder i did not pick.
Click to expand...
Click to collapse
It will be fixed
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
I have many app ideas, but don't have the skill or the time to learn how to make an app. if you would like to know an idea and attempt to make one, just message me.
ArianaGrande said:
It will be fixed
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
I have many app ideas, but don't have the skill or the time to learn how to make an app. if you would like to know an idea and attempt to make one, just message me.
Click to expand...
Click to collapse
Great, I'll switch back when that is fixed. Right now I am using the OUDHS CWM based Recovery cause the text is readable. The text in the regular CWM is too tiny to read, I have to use a magnifying glass to read the options
Toleraen said:
I've never used it. What's the advantage of TWRP over CWM?
Sent from my SGH-M919 using xda premium
Click to expand...
Click to collapse
Honestly, just about everything. Just look at pictures of it and you'll see.
dhonzik said:
I loved TWRP when I was on the S3, but on the S4 it appears to be too sensitive. When I try to install a zip file and scroll down the list of folder using my finger it will enter that folder i did not pick.
Click to expand...
Click to collapse
Yes, there is an issue with that since the touch screen is so much more sensitive on the S4, but it will be fixed soon. Team Win is working on it.