Do I need to be on EL26 OR EL29 to flash CM9 or does it not matter? What do you guys recommend I do in order to flash this rom? Thanks guys!
EL26 but the ROM won't install if your not on a gingerbread Based ROM
Epic touch phone of xXHELLBoy91Xx
so restore to EL26 because currently i'm on EL29 and want to flash CM9.
Yea but are you on a gingerbread based rom?
Epic touch phone of xXHELLBoy91Xx
Yea i'm on a custom one
Sent from my SPH-D710 using xda premium
so as long as you not on a ics ROM when you go into EL26 in order to flash cm9 then you all good
Epic touch phone of xXHELLBoy91Xx
so if i'm on a ics ROM I use that SF restore thing right?
Sent from my SPH-D710 using xda premium
Darrien13 said:
so if i'm on a ics ROM I use that SF restore thing right?
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Correct. If you are on a ICS ROM use the Odin restore pack by Sfhub to go back to Gingerbread ROM then flash the CWM5 recovery as noted in the CM9 and install and boom! Ready to flash CM9
Sent from my SPH-D710 using xda premium
http://forum.xda-developers.com/showthread.php?t=1416477
This is what I did to get the ability to install CM9. I fubar'd the first time and got the unrooted stock flashed.
Vandam500 said:
use the Odin restore pack by Sfhub to go back to Gingerbread ROM
Click to expand...
Click to collapse
(Guess I should have read the replies closer)
Phone wont let me update prl or profile.......but i tried in blazer 4.1 and in frankens ego ics rom
So it must be phone?
Sent from my SPH-D710 using XDA
ScubaSteev said:
Phone wont let me update prl or profile.......but i tried in blazer 4.1 and in frankens ego ics rom
So it must be phone?
Sent from my SPH-D710 using XDA
Click to expand...
Click to collapse
Try on a completely stock rom like one of sfhubs Odin in clicks. Or it could just be sprint for now.
Sent from my SPH-D710 using Tapatalk
slick_rick said:
Try on a completely stock rom like one of sfhubs Odin in clicks. Or it could just be sprint for now.
Sent from my SPH-D710 using Tapatalk
Click to expand...
Click to collapse
I was told to but dont know hiw to use on mobile odin
Never wanted to take the chance of bricking
Sent from my SPH-D710 using XDA
slick_rick said:
Try on a completely stock rom like one of sfhubs Odin in clicks. Or it could just be sprint for now.
Sent from my SPH-D710 using Tapatalk
Click to expand...
Click to collapse
Do i just mobile odin the el26/CWM Kernel and then flash shfubs el26 stock rom?
Sent from my SPH-D710 using XDA
No go to his fe22 odin one click thread and use that to go to stock twiz. From there update prl/profile. Then you can go ahead and mobile Odin the el26 cwm kernel and ref lash to whatever rom.
Sent from my SPH-D710 using Tapatalk
slick_rick said:
No go to his fe22 odin one click thread and use that to go to stock twiz. From there update prl/profile. Then you can go ahead and mobile Odin the el26 cwm kernel and ref lash to whatever rom.
Sent from my SPH-D710 using Tapatalk
Click to expand...
Click to collapse
I thought since i have gb rom i have to use the el26?
And ive never used mobile odin to flash anything besides a el26 kernel so i have no clue how to flash a completely stock rom
Sent from my SPH-D710 using XDA
I think system update support was removed from Ego to save battery life.
Sent from my SPH-D710 using xda premium
TeamERA said:
I think system update support was removed from Ego to save battery life.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
It wont update on blazer 4.1 either
Im going to flash dazed ics rom in a bit
Sent from my SPH-D710 using XDA
ScubaSteev said:
It wont update on blazer 4.1 either
Im going to flash dazed ics rom in a bit
Sent from my SPH-D710 using XDA
Click to expand...
Click to collapse
I had that same problem on Frankenstein's last night. No matter what I tried they wouldn't update so I ended up going back to Calk's ROM. And I really liked Frankenstein's ROM and wish I could of stayed on it longer.
---------- Post added at 01:57 AM ---------- Previous post was at 01:49 AM ----------
ScubaSteev said:
I thought since i have gb rom i have to use the el26?
And ive never used mobile odin to flash anything besides a el26 kernel so i have no clue how to flash a completely stock rom
Sent from my SPH-D710 using XDA
Click to expand...
Click to collapse
You can still flash a GB kernel even though you have a ICS ROM installed. It won't boot the phone completely(it'll freeze on the Samsung Galaxy SII screen on startup). But you can still get into recovery and download modes. That's the benefit right there. You don't need to flash all that though. Which ROM do you want to be on? The part about using Odin to go to FE22 and then go to EL26 has an extra step in it. You really don't need to flash the FE22 before going to EL26.
MeWarning said:
I had that same problem on Frankenstein's last night. No matter what I tried they wouldn't update so I ended up going back to Calk's ROM. And I really liked Frankenstein's ROM and wish I could of stayed on it longer.
---------- Post added at 01:57 AM ---------- Previous post was at 01:49 AM ----------
You can still flash a GB kernel even though you have a ICS ROM installed. It won't boot the phone completely(it'll freeze on the Samsung Galaxy SII screen on startup). But you can still get into recovery and download modes. That's the benefit right there. You don't need to flash all that though. Which ROM do you want to be on? The part about using Odin to go to FE22 and then go to EL26 has an extra step in it. You really don't need to flash the FE22 before going to EL26.
Click to expand...
Click to collapse
Wait what? Lol
Im confused
Doesnt some ics roms have cwm
Sent from my SPH-D710 using XDA
ScubaSteev said:
Wait what? Lol
Im confused
Doesnt some ics roms have cwm
Sent from my SPH-D710 using XDA
Click to expand...
Click to collapse
Ya some of them have CWM or a different custom recovery. What ROM is it that you want to install? What I mean is you don't need to flash to multiple other kernels/ROMs before eventually going to whichever ROM you want.
Go to the dev section and find sfhubs fe22 Odin one click and flash your phone with that. The reason you do this is so you will be on a stock rom where you can update prl and profile. After you do this, using Odin (with only auto reboot checked in top right corner), flash the el26 cwm kernel. Boot into recovery and from here you can flash back to Frankenstein or blazer whatever you want. You will need a computer.
So...
1. Fe22 Odin one click
2. Boot into fe22 stock rom and update prl/profile
3. Odin the el26 cwm kernel
4. Flash whatever new rom you want.
Sent from my SPH-D710 using Tapatalk
slick_rick said:
Go to the dev section and find sfhubs fe22 Odin one click and flash your phone with that. The reason you do this is so you will be on a stock rom where you can update prl and profile. After you do this, using Odin (with only auto reboot checked in top right corner), flash the el26 cwm kernel. Boot into recovery and from here you can flash back to Frankenstein or blazer whatever you want. You will need a computer.
So...
1. Fe22 Odin one click
2. Boot into fe22 stock rom and update prl/profile
3. Odin the el26 cwm kernel
4. Flash whatever new rom you want.
Sent from my SPH-D710 using Tapatalk
Click to expand...
Click to collapse
Just the thing....I don't have a computer
Sent from my SPH-D710 using XDA
1. Mobile Odin el26 cwm kernel
2. Flash this rom http://forum.xda-developers.com/showthread.php?p=26478829
3. Boot into rom and update prl/profile
4. Mobile Odin el26 cwm kernel
5. Boot back into recovery and flash rom of choice
Sent from my SPH-D710 using Tapatalk
slick_rick said:
1. Mobile Odin el26 cwm kernel
2. Flash this rom http://forum.xda-developers.com/showthread.php?p=26478829
3. Boot into rom and update prl/profile
4. Mobile Odin el26 cwm kernel
5. Boot back into recovery and flash rom of choice
Sent from my SPH-D710 using Tapatalk
Click to expand...
Click to collapse
The fe22?
And sweet...easier then I thought,just gotta wait for download.
Thanks slick
Sent from my SPH-D710 using XDA
ScubaSteev said:
The fe22?
And sweet...easier then I thought,just gotta wait for download.
Thanks slick
Sent from my SPH-D710 using XDA
Click to expand...
Click to collapse
Doesn't need to be fe22, but needs to be stock touchwiz or close to so you can update prl/profile and that rom will let you do so. No problem, I'm ways here to help.
Sent from my SPH-D710 using Tapatalk
slick_rick said:
Doesn't need to be fe22, but needs to be stock touchwiz or close to so you can update prl/profile and that rom will let you do so. No problem, I'm ways here to help.
Sent from my SPH-D710 using Tapatalk
Click to expand...
Click to collapse
Well can I flash el26 stock rom ?
Sent from my SPH-D710 using XDA
ScubaSteev said:
Well can I flash el26 stock rom ?
Sent from my SPH-D710 using XDA
Click to expand...
Click to collapse
Fixed in the new update, sorry. Hey scubaSteve, I remember that "sisters friend" thing
Sent from my SPH-D710 using xda premium
Did you try booting into recovery, wipe cache and dalvik, reboot, then try to update again?
I just rooted my ET4G and I am wanting to install CM9 but i am sort of comfused. Am I still supposed to flash EL26 kernel via odin before I do!? Or do I just straight download and flash ROM + Gapps? With this kernel/recovery... I installed team rouge CWM that the guide shows any help thatnks!
Sent from my SPH-D710 using XDA
Yes odin/mobile odin to el26+cwm. El29 has rogue repack recovery which can brick when flashing to or from ICS. EL26+cwm was the last kernel to have official cwm recovery.
Here's a link to stockcwm-el26.tar.md5: http://db.tt/0QJkleJR
Sent on HyDrA with S Voice using Tapatalk 2
Ok so I install this via odin mobile and then I can just download and flash normally?
Sent from my SPH-D710 using XDA
DroidManIc said:
Ok so I install this via odin mobile and then I can just download and flash normally?
Sent from my SPH-D710 using XDA
Click to expand...
Click to collapse
Yes, but when you flash a new rom the kernel is replaced with whatever kernel is included in the rom. So you will have to reflash the el26cwm kernel every time before switching to a new rom. ICS roms won't boot with the kernel, so when switching from ICS to ICS or ICS to GB you will have to hold power+volume up as soon as phone starts to reboot to get into recovery.
Sent on HyDrA with S Voice using Tapatalk 2
I would also suggest having the rom/gapps/kernel you want to flash already downloaded and on your phone before going to el26cwm kernel once your on any ICS ROM.
Sent on HyDrA with S Voice using Tapatalk 2
Cool thanks ill give that a shot.
Sent from my SPH-D710 using XDA
http://forum.xda-developers.com/showthread.php?t=1671356
sfhub one click that solve ur problems
Can i just use calks format all with the included recovery in the cm9 nightly? Then just install blend, or will i run into problems doing it this way? Any ideas would be helpful thanks.
If its chris41 safe CWM recovery you can. If not just mobile odin el26 kernel and flash from there
Sent from my SPH-D710 using xda premium
nicson8 said:
If its chris41 safe CWM recovery you can. If not just mobile odin el26 kernel and flash from there
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Isnt that the one that comes bundled in the nightlies? I am on the 7/9 nightly....if its not, should i just go to Chris41g's post and d/l the AOSP CWM 5.xx and flash it with the current nightly recovery??
I would just Odin to el26 and flash from there to be 100% safe, doesn't really take much longer
Sent from my SPH-D710 using xda app-developers app
Can someone give me a link to what
I have to flash to get down to el29 and then flash calks rom. I'm on the ff18 blu kuban if I can just do it from this rom. Thanks
Sent from my SPH-D710 using XDA
Are you familiar with using Odin out better yet do you have mobile Odin installed on your phone?
Sent from my SPH-D710 using Tapatalk 2
DaMan90 said:
Can someone give me a link to what
I have to flash to get down to el29 and then flash calks rom. I'm on the ff18 blu kuban if I can just do it from this rom. Thanks
Sent from my SPH-D710 using XDA
Click to expand...
Click to collapse
As long as you are on a safe kernel/ recovery whick blu kuban comes with kuban kernel is safe. You can wipe and flash to calks rom.
Sent from my SPH-D710 using XDA
---------- Post added at 03:30 AM ---------- Previous post was at 03:29 AM ----------
im0rtalz said:
Are you familiar with using Odin out better yet do you have mobile Odin installed on your phone?
Sent from my SPH-D710 using Tapatalk 2
Click to expand...
Click to collapse
Yeah, mobile odin will save you time over odin.
Sent from my SPH-D710 using XDA
Can I just wipe format all flash the el29 and the flash the rom or do it backwards?
Sent from my SPH-D710 using XDA
DaMan90 said:
Can I just wipe format all flash the el29 and the flash the rom or do it backwards?
Sent from my SPH-D710 using XDA
Click to expand...
Click to collapse
What??? Ok what kernel are you on? If you on a safe kernel your just adding extra steps.
If you want. Odin or mobile odin el29 direct boot kernel.
Then wipe everything (calkulin's format all zip)
Flash rom
Reboot
Sent from my SPH-D710 using XDA