Develop Bugs

Wildfire S black screen recovery 1.26.401.3 hboot 1.09.0099

Hi
I bought my wfs in poland (sorry for my english and mistakes). I have problem because I updated my phone to 2.26.401.3 in phone jumped message about new soft and I update. Now I unlocked bootloader with htcdev and when I go into recovery (cwm installed by rom manager) I have black screen and under screen leds are light. I tried this but this isn't working now i downgraded phone to 2.13.401.3 and recovery (cwm) still not working. I tried another recovery but no one working. I want install new rom. What do? Can I install custom rom without recovery? or any solutions of this problem?

I had very similar problems, and could not find any solution, so I created custom recovery.img with appropriate kernel. Download attached recovery.img and using fastboot burn it:
$ fastboot flash recovery recovery,img
Phone needs to be in "fastboot usb" mode. Let me know if you have problems with it. Works for me.

lanaczko said:
I had very similar problems, and could not find any solution, so I created custom recovery.img with appropriate kernel. Download attached recovery.img and using fastboot burn it:
$ fastboot flash recovery recovery,img
Phone needs to be in "fastboot usb" mode. Let me know if you have problems with it. Works for me.
Click to expand...
Click to collapse
Dint work for me dude. Recovery is still a blank screen.

rajanand made a thread about this last time look for it and it works

ngoralph said:
rajanand made a thread about this last time look for it and it works
Click to expand...
Click to collapse
Thankyou! Found his post. I shall give it a shot now. Cheers

it dint work for me .. do you know any other way to get rid of this black screen on recovery.. or atleast findout the reason behind such a thing.

[TUTORIAL] How to Install ClockworkMod Recovery on wildfire s
I Hope you have SDK tools for Android, Java runtime, and HTC Sync installed on your Windows PC. After unlocking the bootloader and rooted your device follow this:
(Note: You only need to install HTC Sync for the drivers that come with it. But the program sometimes causes conflicts, so during this procedure, make sure it is not running. Open Task Manager in Windows and kill it. If you don’t use HTC Sync, you may also open Control Panel and uninstall it without uninstalling the drivers.)
[OPTIONAL] Update Android software version to 2.3.5
If you have a Marvel/A510e, It is recommended updating to 2.3.5 before proceeding (if possible), though you can root a 2.3.3 device. If you decide to root 2.3.3 now and install 2.3.5 later, you’ll loose your root, cwm and have to do it again.
Make sure the phone is connected in Charge only mode. Enable USB debugging by going to Settings > Applications > Development > USB. Also Disable "Fast boot" by go to Settings>Power>uncheck "Fast boot".
1. Download the official 5.0.2.8 image at ClockworkMod’s index of recoveries here: http://www.clockworkmod.com/rommanager/
Make sure you choose the right one for your device whether Marvel or MarvelC. If you downloaded the zip version, extract the img file from the zip you just downloaded.
2. Boot the phone into HBOOT. After it scans for PG7610.zip, select 'FASTBOOT' and press the <Power> button then connect the USB cable. The word 'FASTBOOT' will change into 'FASTBOOT USB'. If not, then either your USB drivers for the Wildfire S or Android SDK Tools is not installed properly.
3. Open command prompt in Windows and navigate to the folder where you extracted the recovery image in step 1.
4. Type the following command: fastboot flash recovery [image name.img]. For example:
c:\android\>fastboot flash recovery recovery-clockwork-5.0.2.8-marvel.img
Try the above method, if it fails then go down:
It's a full version, so just download the .zip put it in sdcard then replace battery, press <power> with Vol Down.
http://forum.xda-developers.com/showthread.php?t=1213229
____________________________________________
Hope this may be useful. (If really, Just press 'Thanks').

http://forum.xda-developers.com/showthread.php?t=1781105 this will work i bet ya dont say thanks just click it

cant work for me dear senior
Senthamil said:
I Hope you have SDK tools for Android, Java runtime, and HTC Sync installed on your Windows PC. After unlocking the bootloader and rooted your device follow this:
(Note: You only need to install HTC Sync for the drivers that come with it. But the program sometimes causes conflicts, so during this procedure, make sure it is not running. Open Task Manager in Windows and kill it. If you don’t use HTC Sync, you may also open Control Panel and uninstall it without uninstalling the drivers.)
[OPTIONAL] Update Android software version to 2.3.5
If you have a Marvel/A510e, It is recommended updating to 2.3.5 before proceeding (if possible), though you can root a 2.3.3 device. If you decide to root 2.3.3 now and install 2.3.5 later, you’ll loose your root, cwm and have to do it again.
Make sure the phone is connected in Charge only mode. Enable USB debugging by going to Settings > Applications > Development > USB. Also Disable "Fast boot" by go to Settings>Power>uncheck "Fast boot".
1. Download the official 5.0.2.8 image at ClockworkMod’s index of recoveries here: http://www.clockworkmod.com/rommanager/
Make sure you choose the right one for your device whether Marvel or MarvelC. If you downloaded the zip version, extract the img file from the zip you just downloaded.
2. Boot the phone into HBOOT. After it scans for PG7610.zip, select 'FASTBOOT' and press the <Power> button then connect the USB cable. The word 'FASTBOOT' will change into 'FASTBOOT USB'. If not, then either your USB drivers for the Wildfire S or Android SDK Tools is not installed properly.
3. Open command prompt in Windows and navigate to the folder where you extracted the recovery image in step 1.
4. Type the following command: fastboot flash recovery [image name.img]. For example:
c:\android\>fastboot flash recovery recovery-clockwork-5.0.2.8-marvel.img
Try the above method, if it fails then go down:
It's a full version, so just download the .zip put it in sdcard then replace battery, press <power> with Vol Down.
http://forum.xda-developers.com/showthread.php?t=1213229
____________________________________________
Hope this may be useful. (If really, Just press 'Thanks').
Click to expand...
Click to collapse
cant work for me dear

Soft Brick: Stuck at Huawei Ascend logo and unbale to Boot/access Recovery.

=> Install the Universal Android USB Driver from the link below:
http://adbdriver.com/upload/AdbDriverInstaller.exe
=> Download and install ADB and Fast Boot from thebelow link.
http://fs1.d-h.st/download/00103/KIP/adb-setup-1.2.exe
=> Extract the Stock ROM using the Tool "Huawei Update Extractor" in the computer.
=>"HuaweiUpdateExtractor download link:
http://dl.xda-developers.com/attachdl/a0f6b6cc9f19468bb6c24278361a3044/532549ec/2/6/3/0/2/4/2/HuaweiUpdateExtractor_0.9.7.9_Setup.zip
=> Copy and paste the Stock/TWRP Recovery and BOOT.img in the "ADB and Fast Boot" folder.
=> Connect the HAM to the computer using the supplied USB cable.
=> Press and hold the Power and Volume Down button.
=> HAM will be recognized as ABD device.
=> Leave the Power and Volume Down button.
=> Double click to open the installed "ADB and Fast Boot" from the Desktop or open the computer prompt to access the "ADB and Fast Boot" folder.
=> In the ADB and Fast Boot prompt:
=> Type: fastboot reboot-bootloader.
=> Type: fastboot flash BOOT BOOT.img
=> Type fastboot flash RECOVERY RECOVERY.img
Fastboot will flash the image and give you a success/failure notification. If successful, you're all set.
Finally, press and hold the Power button. HAM will boot now
fastboot: that's the executable tool
flash: that's the function we want the fastboot tool to perform
recovery: this is the name of the partition we want to flash into. since we are flashing a recovery image, it needs to go to the recovery partition.
recovery.img: this is the name of the actual file to flash. Your file name may be different. Just make sure it matches the actual file name.

i can't download Huawei Update Extractor
Azharla08 said:
=> Install the Universal Android USB Driver from the link below:
http://adbdriver.com/upload/AdbDriverInstaller.exe
=> Download and install ADB and Fast Boot from thebelow link.
http://fs1.d-h.st/download/00103/KIP/adb-setup-1.2.exe
=> Extract the Stock ROM using the Tool "Huawei Update Extractor" in the computer.
=>"HuaweiUpdateExtractor download link:
http://dl.xda-developers.com/attachdl/07eee0ca707d998e0074fe7066df2e1b/5324e778/2/6/3/0/2/4/2/HuaweiUpdateExtractor_0.9.7.9_Setup.zip
=> Copy and paste the Stock/TWRP Recovery and BOOT.img in the "ADB and Fast Boot" folder.
=> Connect the HAM to the computer using the supplied USB cable.
=> Press and hold the Power and Volume Down button.
=> HAM will be recognized as ABD device.
=> Leave the Power and Volume Down button.
=> Double click to open the installed "ADB and Fast Boot" from the Desktop or open the computer prompt to access the "ADB and Fast Boot" folder.
=> In the ADB and Fast Boot prompt:
=> Type: fastboot reboot-bootloader.
=> Type: fastboot flash BOOT BOOT.img
=> Type fastboot flash RECOVERY RECOVERY.img
Fastboot will flash the image and give you a success/failure notification. If successful, you're all set.
Finally, press and hold the Power button. HAM will boot now
fastboot: that's the executable tool
flash: that's the function we want the fastboot tool to perform
recovery: this is the name of the partition we want to flash into. since we are flashing a recovery image, it needs to go to the recovery partition.
recovery.img: this is the name of the actual file to flash. Your file name may be different. Just make sure it matches the actual file name.
Click to expand...
Click to collapse
i can't download Huawei Update Extractor,there is something wrong with the link?

enlove said:
i can't download huawei update extractor,there is something wrong with the link?
Click to expand...
Click to collapse
link updated

Azharla08 said:
link updated
Click to expand...
Click to collapse
i can't download also

enlove said:
i can't download also
Click to expand...
Click to collapse
Get it from here
http://forum.xda-developers.com/showthread.php?t=2433454

svvv said:
Get it from here
http://forum.xda-developers.com/showthread.php?t=2433454
Click to expand...
Click to collapse
thinks!

can i use this to huawei y320-u10
because i tried to go to recovery mode and it pops out to android laying down and saying no command

kllnn8 said:
can i use this to huawei y320-u10
because i tried to go to recovery mode and it pops out to android laying down and saying no command
Click to expand...
Click to collapse
Yes you can do it provided if you have update.app file for your mobile and boot.img/recovery.img extracted from your update.app

where can i find update.app for huawei y320-u10?

Huawei ascend mate -
I rooted the device few days back and i also intastalled few fonts and was working like charm, i wanted to change the font and downloaded new font, apply -- restart--- disaster.... gone.. Now my PHONE is not starting up .. it stays awake in start up screen.. i tried Hard RESET .. but there were no files in cache as well recovery ..when i try to charge the update.app into sd in recovery mode, the phone don't see the file inside...plz help me.

No help for me? Please, i'm desperate.....

cloche said:
No help for me? Please, i'm desperate.....
Click to expand...
Click to collapse
Jus try this rom http://forum.xda-developers.com/showthread.php?t=2688699
Its b923 emui 2.0 beta version
Install as per the steps provided in the link
Make sure you put ur phone in Bootloader mode(Power + Vol down) before executing the .bat file.
Once installed and booted to OS copy the update.app file to dload folder in ur external sdcard goto settings and update using local mode that should install automatically.

But I cannot make the phone in USB debugging if it's stuck........and another thing.......I don't have the bootloader unlocker....

cloche said:
But I cannot make the phone in USB debugging if it's stuck........and another thing.......I don't have the bootloader unlocker....
Click to expand...
Click to collapse
Just put the mobile in bootloader mode and run the bat file. No need to enable debugging mode.
ignore first three installation steps in the above link...u start from step 4
no need to have unlocked bootloader

Many many Thanks for your help,
but I can not enter in bootloader mode, if i press vol down and power the phone remains with the written "Huawei Ascend".....instead i have no problem to enter in recovery with vol up + down + power.......i do not understand why.....

cloche said:
Many many Thanks for your help,
but I can not enter in bootloader mode, if i press vol down and power the phone remains with the written "Huawei Ascend".....instead i have no problem to enter in recovery with vol up + down + power.......i do not understand why.....
Click to expand...
Click to collapse
Press and hold the Power button and then press and hold the volume UP button to enter into fast recovery mode.
Then, download and extract the file Bootloader unlock from the link "http://goo.im/devs/joestone/Mate/MT1_BL_unlock.EXE" and Flash the files in fastboot.

Doesnt' work for me...
Out an errore message, Can not find the unlock.bat file...

cloche said:
Many many Thanks for your help,
but I can not enter in bootloader mode, if i press vol down and power the phone remains with the written "Huawei Ascend".....instead i have no problem to enter in recovery with vol up + down + power.......i do not understand why.....
Click to expand...
Click to collapse
first u have to connect the USB cable then switch off the mobile, now press the power button along with the volume down button the screen should say Huawei Ascend and will stay in that screen. Make sure all the drivers are installed only then it will get detected in ur PC check the Device manager in ur PC for android device if its there then ur mobile is detected. After all these steps execute the batch file.

MY FRIEND!!!!!!!!!!!!!!
The phone it's running now!!!!!!!!!
But actually i have a 4.2.2. chinese rom.........how i made to put the stock firm???
Thanks in advance, your are the best!!!!!!

cloche said:
MY FRIEND!!!!!!!!!!!!!!
The phone it's running now!!!!!!!!!
But actually i have a 4.2.2. chinese rom.........how i made to put the stock firm???
Thanks in advance, your are the best!!!!!!
Click to expand...
Click to collapse
Thats great...
Jus copy the update.app file to dload folder in ur external sdcard goto settings->about and update using local mode that should install automatically.

Nokia N1 bootloop

My N1 suddenly reboot and then it can't start, just continuosly bootloop and can't boot into droidboot or recovery by pressing Power+ Vol-. Any help!!!

anyone help me!

same problem

We need to know more to be able to help. What did you do before updating? root? update? nothing?

syddd said:
We need to know more to be able to help. What did you do before updating? root? update? nothing?
Click to expand...
Click to collapse
I followed this instruction http://forum.xda-developers.com/showpost.php?p=60925623&postcount=44. Root has been established successfully, then installed GApps and after the tablet does not boot

Shvonder said:
I followed this instruction http://forum.xda-developers.com/showpost.php?p=60925623&postcount=44. Root has been established successfully, then installed GApps and after the tablet does not boot
Click to expand...
Click to collapse
That's it, now it not work anymore, just reboot and play bootanimation then reboot

alan_greece said:
My N1 suddenly reboot and then it can't start, just continuosly bootloop and can't boot into droidboot or recovery by pressing Power+ Vol-. Any help!!!
Click to expand...
Click to collapse
I have same problem
Help me!!! Please

help us!

For me its working flawlessly.... may be u have done something wrong. Had u turned off mpt mode ? Did u format and cleared catch before installing gapps ?

still waiting for solution...

( help me

When my one was boot loop.
I 've solved loop problems like following process.
1. Open windows device manger for check N1 is ready to use ADB.
2. Ready CMD for use ADB.
3. Connect to PC and wait until can see ADB Device on windows device manager.
4. ADB devices
5. ADB reboot bootloader
6. Select recovery with volume button.
7. If success on recovery mode. just push once power button. (can see some menu)
8. select factory reset. ( I can't remember correct menu name) or wipe cache / data?
After this okay to boot initial setup.
I can't remember well what I do before .
It's passed 2weeks.
And My one on the way from seller cause fix from another problems.

soondin said:
When my one was boot loop.
I 've solved loop problems like following process.
1. Open windows device manger for check N1 is ready to use ADB.
2. Ready CMD for use ADB.
3. Connect to PC and wait until can see ADB Device on windows device manager.
4. ADB devices
5. ADB reboot bootloader
6. Select recovery with volume button.
7. If success on recovery mode. just push once power button. (can see some menu)
8. select factory reset. ( I can't remember correct menu name) or wipe cache / data?
After this okay to boot initial setup.
I can't remember well what I do before .
It's passed 2weeks.
And My one on the way from seller cause fix from another problems.
Click to expand...
Click to collapse
but when i run adb reboot bootloader, it said my device was unauthorized

soondin said:
When my one was boot loop.
I 've solved loop problems like following process.
1. Open windows device manger for check N1 is ready to use ADB.
2. Ready CMD for use ADB.
3. Connect to PC and wait until can see ADB Device on windows device manager.
4. ADB devices
5. ADB reboot bootloader
6. Select recovery with volume button.
7. If success on recovery mode. just push once power button. (can see some menu)
8. select factory reset. ( I can't remember correct menu name) or wipe cache / data?
After this okay to boot initial setup.
I can't remember well what I do before .
It's passed 2weeks.
And My one on the way from seller cause fix from another problems.
Click to expand...
Click to collapse
i cant use ADB now, always unauthorized device....

Anyone who had a way to fix it? I tried but my N1 dont connect with the PC..

plz help us!

i can not open recovery by pressing vol- + power. I got a bootloop N1,too.

kaikool said:
i can not open recovery by pressing vol- + power. I got a bootloop N1,too.
Click to expand...
Click to collapse
Iam russian... Use the phone flash tool intel v444. connect you device via usb. reboot rebooot rebooot.... when programm detect your device. check in "custom flash" option fastboot or adb. and flash ifwi file. wait min 15.... WHEN YOU DEVICE TURN ON BOOTLOADER CANCEL FLASH (PULL USB CABBLE!!!) volume - to recovery. open recovery menu and factory reset and cache clear. update with sideload and wipe data/ reboot!

@Andreko777 thank you, ill try it. Hope it works! But i think it doesnt work because, when i plug my usb cable to my computer and run Intel flashtool, it can not regconize my device. So i cant do anything else,........
@alan_greece i have found another method in a Chinese forum, but i dont have my device here to do. you can try this.
1. Tools required:
1, Nokia N1 ROOT tools:
link: http: //pan.baidu.com/s/1c0i1KU8 Password: c7i3
2, Nokia ROM package:
link: http: //pan.baidu.com/s/1c06OrhI Password: zfg3
above package Zhongguancun Forum "installed Daitou", "expect Dawn c466469156" offer. Some pictures cut from below "expectations dawn c466469156" rescue brick tutorial (need only be able to enter the official REC tutorial) Step:
Prerequisite: There is a station has already authorized under the USB debugging mode N1 computer; N1 boot card after death, in The computer's device manager can see Android Composite ADB Interface device.
1, the N1 is turned on, connected to the computer.
2, download IntelAndroid-FBRL-05-16-2015-PTR.rar, unzip it into a directory in the root directory of the disk,
Right-click launcher.bat, choose Run as administrator.
Follow the onscreen prompts for capital ACCEPT OK. (Must be capitalized, because LINUX is case-sensitive)
viewing screen, if the device is connected, a blue-green word, if the word is red, was not connected, carefully check the above-mentioned process is correct.
3. After the device is connected, press the T1 diagram interface, Enter. N1 will restart, and N1 official BOOTLOADER screen appears, and writes in execution. Until an error message. Stop.
4, according to N1 volume keys, select the recovery, press the power button to confirm. Reboot into official REC. Then select Options apply update from adb and even computers.
5, put the package before downloading rename the file update.zip pulled platform-tools folder unzipped. Open a command indicator cd into this folder.
6, in the command prompt, type adb sideload update.zip Enter.
7, prompted reboot the N1.

kaikool said:
@Andreko777 thank you, ill try it. Hope it works! But i think it doesnt work because, when i plug my usb cable to my computer and run Intel flashtool, it can not regconize my device. So i cant do anything else,........
@alan_greece i have found another method in a Chinese forum, but i dont have my device here to do. you can try this.
1. Tools required:
1, Nokia N1 ROOT tools:
link: http: //pan.baidu.com/s/1c0i1KU8 Password: c7i3
2, Nokia ROM package:
link: http: //pan.baidu.com/s/1c06OrhI Password: zfg3
above package Zhongguancun Forum "installed Daitou", "expect Dawn c466469156" offer. Some pictures cut from below "expectations dawn c466469156" rescue brick tutorial (need only be able to enter the official REC tutorial) Step:
Prerequisite: There is a station has already authorized under the USB debugging mode N1 computer; N1 boot card after death, in The computer's device manager can see Android Composite ADB Interface device.
1, the N1 is turned on, connected to the computer.
2, download IntelAndroid-FBRL-05-16-2015-PTR.rar, unzip it into a directory in the root directory of the disk,
Right-click launcher.bat, choose Run as administrator.
Follow the onscreen prompts for capital ACCEPT OK. (Must be capitalized, because LINUX is case-sensitive)
viewing screen, if the device is connected, a blue-green word, if the word is red, was not connected, carefully check the above-mentioned process is correct.
3. After the device is connected, press the T1 diagram interface, Enter. N1 will restart, and N1 official BOOTLOADER screen appears, and writes in execution. Until an error message. Stop.
4, according to N1 volume keys, select the recovery, press the power button to confirm. Reboot into official REC. Then select Options apply update from adb and even computers.
5, put the package before downloading rename the file update.zip pulled platform-tools folder unzipped. Open a command indicator cd into this folder.
6, in the command prompt, type adb sideload update.zip Enter.
7, prompted reboot the N1.
Click to expand...
Click to collapse
Now i cant authorized my device anymore

ASAP Help!I think i bricked my k012 :/

Hi.
Well as i said in my last topic,My tablet went on a auto rotation and etc.
http://forum.xda-developers.com/fonepad-7/help/stuck-boot-screen-fonepad-7-k012-t3267240
Selected recovery,Gave me an error.
So,Now i used a Jellybean firmware on Asus site.
Used those delete userdata and cache and system and etc.
Then loaded those 3 img files,It worked fine in droidbot.
But when i choosed recovery,It gave me an error after some seconds(Around 20 sec)
Well,Then i thought maybe i should use kitkat,So i download its firmware on Asus site.
Done those steps,Used SD update,It gave me same error again.
What should i do now dudes?
Please someone help me its URGENT! :crying: :crying:
P.S:Errors i told,I meant that andriod guy resting with a red attention...
Steps i have done already:
Used With/Without Wipe data button,Then used fastboot erase system and fastboot erase userdata and fastboot erase cache
Then load splashscreen and etc.
With both JB-KK firmwares.
I renamed firmwares to k012_sdupdate.zip and put it in an external SD.
Any way to save me? :/
---------------
IFWI VERSION:64.25
DROIDBOT:10.32.1.22.1

NOTE: MAKE SURE YOUR DEVICE IS MODEL NO. K012 FE170CG
BEFORE YOU CONTINUE
1. Download ADB and Fastboot : [TOOL] [WINDOWS] ADB, Fastboot and Drivers - 15 seconds ADB Installer v1.4.2
2. Install ADB drivers : Intel Android USB Drivers
3.Download Previous Firmware from Asus support site.
4. Download this for temporary tethered cwm
ACTUAL PROCEDURE
1. copy the firmware (.zip) to an external sd card
2. Extract downloaded recovery.rar
3. Put your device in Droidboot mode by holding both power button and vol down while device is turned off.
4. Connect device to computer. Open cmd and type "fastboot device" to verify.
5.Open launcher.bat in the extracted folder.
-Type ACCEPT
-Type T2
6. Some stuff will appear after that. Dont do anything. In a few moments CWM will load.
7.Next part is pretty self explanatory. use volume keys to go up and down and press power to select option. choose install zip. in the next menu choose install from external sd card*. Choose the zip file you downloaded from Asus website, if installation fails download another version from the support website.
FISRT BOOT MIGHT TAKE SOME TIME.
* I dont remember the exact wordings.
------Hit thanks if this helped you------------

Total Nub's guide to rooting Qmobile Q Infinity & Micromax Canvas Inifinity

After failing some 1-click rooting methods, for the first time I tried to do it the hard way.
That turned out to be a pretty easy way thanks to some handy links to drivers and other files I found.
Infinity thanks to the thread I found platform-tools from and the website called "getdroidtips" for the Custom TWRP for the HS2.
NOTE: THIS GUIDE WILL WIPE YOUR DEVICE SO BE PREPARED
Standard warning: FOLLOW THIS GUIDE AT YOUR OWN RISK. REMEMBER, AS PER MY NAME I AM A TOTAL NUB. I DO NOT TAKE RESPONSIBILITY FOR YOUR PHONE MALFUNCTIONING, BRICKING, BLOWING UP OR DROWNING IN COOKING OIL (rip my Elephone S7)
Pastebin code for missing links: F2RGqM1A
1) Preparation
Download the latest Flashable.Zip from [ ]
Place SuperSu.zip in your sd card or internal storage
Enable Developer Options by going to Settings -> "About Phone" -> Click "Software Version" 7-8 times
Go to developer Options in Settings
Enable OEM Unlocking
Enable USB Debugging
Shutdown your phone by holding the power button
Boot into fastboot by holding the Volume Up key + Power Button
Press Volume Down key to get into fastboot
2) On your Windows PC:
Download the file from [ ] and extract the platform-tools folder (I extract to "D:\Downloads" in this example)
Download the Custom TWRP from [ ] and place it inside the platform-tools folder
Connect your device to your computer
press Win+R, type cmd and press enter
2.1) (not always needed)
If your device won't connect or the steps below don't work, try updating drivers:
Connect your phone while it's in fastboot
open start menu, search and open Device Manager
check inside Portable Devices or Android Devices for your phone's name
or look for Android Bootloader Interface
if it's not there, it might be named something else, with an icon that has a yellow triangle inside it.
Right click it, Update Driver
> Browse my computer for driver software
> Let me pick from a list of available drivers on my computer
> select Android Bootloader Interface
to check if you are connected, type "fastboot devices" in cmd and you'll see a device code
3) Unlocking Bootloader
In cmd, enter the following commands:
Code:
D:
cd D:\Downloads\platform-tools
fastboot oem unlock-go
THIS STEP WILL WIPE YOUR DEVICE DATA
wait for restart
4) Booting into TWRP
Go to device Settings again and ensure OEM Unlocking and USB Debugging are still Enabled. Reboot into fastboot.
In cmd:
Code:
fastboot boot twrp-3.1.1-0-20171128-UNOFFICIAL-HS2.img
(In case above cmd line doesn't work, type "fastboot boot twrp" and press Tab)
5) Backing up your rom and data (Optional but recommended)
Inside TWRP, Click Backup, tick everything, select desired directory and swipe to backup.
Reboot and follow step 5 again if needed
6) Installing SuperSU with root privileges
Inside TWRP, Click Install and select SuperSU.zip
Swipe to install and reboot
Enjoy

Please port miui 9 or lineage os 15 for micromax canvas infinity hs2

NubbyMcNubNub said:
After failing some 1-click rooting methods, for the first time I tried to do it the hard way.
That turned out to be a pretty easy way thanks to some handy links to drivers and other files I found.
Infinity thanks to the thread I found platform-tools from and the website called "getdroidtips" for the Custom TWRP for the HS2.
NOTE: THIS GUIDE WILL WIPE YOUR DEVICE SO BE PREPARED
Standard warning: FOLLOW THIS GUIDE AT YOUR OWN RISK. REMEMBER, AS PER MY NAME I AM A TOTAL NUB. I DO NOT TAKE RESPONSIBILITY FOR YOUR PHONE MALFUNCTIONING, BRICKING, BLOWING UP OR DROWNING IN COOKING OIL (rip my Elephone S7)
Pastebin code for missing links: F2RGqM1A
1) Preparation
Download the latest Flashable.Zip from [ ]
Place SuperSu.zip in your sd card or internal storage
Enable Developer Options by going to Settings -> "About Phone" -> Click "Software Version" 7-8 times
Go to developer Options in Settings
Enable OEM Unlocking
Enable USB Debugging
Shutdown your phone by holding the power button
Boot into fastboot by holding the Volume Up key + Power Button
Press Volume Down key to get into fastboot
2) On your Windows PC:
Download the file from [ ] and extract the platform-tools folder (I extract to "D:\Downloads" in this example)
Download the Custom TWRP from [ ] and place it inside the platform-tools folder
Connect your device to your computer
press Win+R, type cmd and press enter
2.1) (not always needed)
If your device won't connect or the steps below don't work, try updating drivers:
Connect your phone while it's in fastboot
open start menu, search and open Device Manager
check inside Portable Devices or Android Devices for your phone's name
or look for Android Bootloader Interface
if it's not there, it might be named something else, with an icon that has a yellow triangle inside it.
Right click it, Update Driver
> Browse my computer for driver software
> Let me pick from a list of available drivers on my computer
> select Android Bootloader Interface
to check if you are connected, type "fastboot devices" in cmd and you'll see a device code
3) Unlocking Bootloader
In cmd, enter the following commands:
THIS STEP WILL WIPE YOUR DEVICE DATA
wait for restart
4) Booting into TWRP
Go to device Settings again and ensure OEM Unlocking and USB Debugging are still Enabled. Reboot into fastboot.
In cmd:
(In case above cmd line doesn't work, type "fastboot boot twrp" and press Tab)
5) Backing up your rom and data (Optional but recommended)
Inside TWRP, Click Backup, tick everything, select desired directory and swipe to backup.
Reboot and follow step 5 again if needed
6) Installing SuperSU with root privileges
Inside TWRP, Click Install and select SuperSU.zip
Swipe to install and reboot
Enjoy
Click to expand...
Click to collapse
Hi please help me, after flashing recovery my phone is on bootloop now, what do i do

Hem97 said:
Please port miui 9 or lineage os 15 for micromax canvas infinity hs2
Click to expand...
Click to collapse
I wish I could.
Sudhangshu said:
Hi please help me, after flashing recovery my phone is on bootloop now, what do i do
Click to expand...
Click to collapse
Did you try "flashboot boot twrp..." like in my guide or "flashboot flash twrp..."?
And which twrp image did you use?
In any case, if you can still get to the fastboot screen, try booting with the twrp image in Step 4 above (download links in the pastebin link)

NubbyMcNubNub said:
I wish I could.
Did you try "flashboot boot twrp..." like in my guide or "flashboot flash twrp..."?
And which twrp image did you use?
In any case, if you can still get to the fastboot screen, try booting with the twrp image in Step 4 above (download links in the pastebin link)
Click to expand...
Click to collapse
Hi, "flashboot boot twrp" wasnt working at all, so i tried "flashboot flash twrp" and all i have is a bootloop. So after flashing recoveru i booted my phone to fastboot and run the command, " flashboot boot recovery recovery.img" where recovery is the custom recovery image and it booted into recovery. Then there is one more step to do that allowed me to finally boot into my os. Its working fine and i still have twrp installed on my phone
---------- Post added at 06:53 PM ---------- Previous post was at 06:49 PM ----------
NubbyMcNubNub said:
I wish I could.
Did you try "flashboot boot twrp..." like in my guide or "flashboot flash twrp..."?
And which twrp image did you use?
In any case, if you can still get to the fastboot screen, try booting with the twrp image in Step 4 above (download links in the pastebin link)
Click to expand...
Click to collapse
Btw i dont find any pastebin links, im sorry im just a noob too..... Lol

Want custom rom for Qmobile Qinfinity
I want a custom rom for Qmobile Qinfinity.
Because its own rom lags and does not have full features. Please give the rom like lineage os,RR,Or Stock
Please Help?:good:

hi bro,recently i just buy a new phone which is micromax canvas infinity.i have rooted my phone successfully,but there are no custom roms available for this phone.can you develop any custom rom for this phone?that will be very helpful...