Related
just tried flashing xplod, after the boot animation just got a black screen.
flashed blazer 3.7, doesnt go past the sgs2 screen, waited like 10-15 minutes twice.
restored miui backup, no problems...
i feel like im probably forgetting something stupid, wiped everything a couple times and all that.
badname said:
just tried flashing xplod, after the boot animation just got a black screen.
flashed blazer 3.7, doesnt go past the sgs2 screen, waited like 10-15 minutes twice.
restored miui backup, no problems...
i feel like im probably forgetting something stupid, wiped everything a couple times and all that.
Click to expand...
Click to collapse
Did you go to advanced in clockwork and clear the dalvik cache?
sure did
this is how it all went down exactly
from miui rebooted into recovery
used calks wipe all 2 times
flashed xplod .05 or whatever it is with a 5
after boot animation black screen, but the screen is on
hold power, reboot, hold vol up and power
booted into rogue recovery, so rogue flashed
wiped everything from the wipe menu: factory restore, cache, dalvik, calks wipe all again just in case
reboot, same deal with black screen after boot animation
reboot into recovery wipe everything flash blazer
stuck at sgs2 screen
reboot into recovery, restore backup
MIUI is back up and running
Make sure you format the system and data before you flash touchwiz or aosp. I usually go to the mounts and storage, and format system, data, and cache. Also, are the roms your trying to install modified in any way?
I think I may have just bricked my phone. I tried to install the hulu app with the new flash player and stuff. And after I flashed hulu.zip, i rebooted it and got stuck on the white "HTC EVO 4G" screen. What should I do?
Your ok. Just pull the battery, get to Hboot (Vol down +Power til the Hboot screen comes up) go to recovery and wipe cache and dalvik cache and try again. If it doesn't boot, go back and wipe everything, except SD Card: and Battery Stats, reflash your ROM and go from there
Installed gederom, kept wiping, caches, dalviks, flash, reboot, always go past TWRP and into that boot animation - robot with CM9 near it.
Never goes past this point.
What am I to do?
Factory Reset flash the ROM again followed by gapps. should be fine then
yeah wipe all just dont wipe your sd card flash rom flash gaps if needed and go to mount and make sure there are no checks in the boxes of system and data if so uncheck them then reboot
acmys said:
Installed gederom, kept wiping, caches, dalviks, flash, reboot, always go past TWRP and into that boot animation - robot with CM9 near it.
Never goes past this point.
What am I to do?
Click to expand...
Click to collapse
Did you charge full your KF battery?
Hi you guys. Im have a bit of trouble whit the CWM. Im stuck in a kind of bootloop after updating to latest CM10. It boots up and i can access my homscreen for like 6-7 sec, but then it reboots to bootscreen.
So i thought i have to wipe my data, get it back to factory state. So i do that, wipes cache to. I have even tried the Mount and storage > format /system /cache and /data.
But when i re-install my rom allmy apps, wallpaper and that, are all where i put them. I can even mange to open some of the apps whitin the 6-7 sec window i have before the phone will reboot. The CWM says it done all things right. No error messages at any time ...
Any one whit an idea to get this back on track ?
Runge2970 said:
Hi you guys. Im have a bit of trouble whit the CWM. Im stuck in a kind of bootloop after updating to latest CM10. It boots up and i can access my homscreen for like 6-7 sec, but then it reboots to bootscreen.
So i thought i have to wipe my data, get it back to factory state. So i do that, wipes cache to. I have even tried the Mount and storage > format /system /cache and /data.
But when i re-install my rom allmy apps, wallpaper and that, are all where i put them. I can even mange to open some of the apps whitin the 6-7 sec window i have before the phone will reboot. The CWM says it done all things right. No error messages at any time ...
Any one whit an idea to get this back on track ?
Click to expand...
Click to collapse
flash twrp recovery via fastboot
simms22 said:
flash twrp recovery via fastboot
Click to expand...
Click to collapse
okay, just did. Tried the wipe and cleat options on that, but whit same results...
Runge2970 said:
okay, just did. Tried the wipe and cleat options on that, but whit same results...
Click to expand...
Click to collapse
are you wiping data(factory reset) or are you just wiping your dalvik and cache?
Runge2970 said:
Hi you guys. Im have a bit of trouble whit the CWM. Im stuck in a kind of bootloop after updating to latest CM10. It boots up and i can access my homscreen for like 6-7 sec, but then it reboots to bootscreen.
So i thought i have to wipe my data, get it back to factory state. So i do that, wipes cache to. I have even tried the Mount and storage > format /system /cache and /data.
But when i re-install my rom allmy apps, wallpaper and that, are all where i put them. I can even mange to open some of the apps whitin the 6-7 sec window i have before the phone will reboot. The CWM says it done all things right. No error messages at any time ...
Any one whit an idea to get this back on track ?
Click to expand...
Click to collapse
OK do what simms22 has explained. That should work.
But from what I am interpreting is that you are doing cache not wipe. So you go to "wipe data/factory reset" menu and hit/press yes. It should wipe it and done. BTW it might have been in a boot loop because you might of dirty flashed or you didn't wipe cache and dalvik cache. That is very important to remember. Never dirty flash and also wipe cache and dalvik cache.
Also did you play with tweaks and such before this was happening. Like voltage or over clock because that could be the problem too.
Dalvik cache and cache are hash signed by the last rom that was flashed. New rom, new hash sign. No need to wipe caches, just data.
Sent from my i9250
Cwm is notorious for failed wipes.
Definitely upgrade to twrp, and if your phone is so messed up twrp can't wipe it, use the android revolution wipe script.
Sent from my Galaxy Nexus using xda premium
If you're backed up and don't mind losing EVERYTHING, yes, EVERYTHING in /data, then boot into fastboot mode and run
Code:
fastboot erase userdata
from your computer. (Might need root privileges if running on Linux)
Hi guys. I got it to work finally. I didt some tweaking whit the DPI. Maybe that was the cause of the crash ??
But i went to use the Galaxy Nexus toolkit, first of all to flash the other recovery program. But since it dint work either i flashed it whit sock rom, from the same toolkit at started all over. That did work, but hell of a way to go
I have a ATT Samsung Galaxy S3, running Android 4.2.2. I was putting Clockwork on and when I got done and rebooted system, nothing. It vibrates once and the words Samsung comes up then total black screen. Bootloader and downloader still work fine. I formatted, put a rom back on but the same thing happens. It just seems like there is a missing file that is stopping it from continuing to start up. Can someone give me some guidance. I jailbroke my phone 2 years ago so I am very rusty. Thanks for the help.
Clear data, dalvik, and cache in recovery, then reboot.
WARNING: doing this will wipe your data off the phone.
audit13 said:
Clear data, dalvik, and cache in recovery, then reboot.
WARNING: doing this will wipe your data off the phone.
Click to expand...
Click to collapse
cleared both, then even formatted. Like I said before, when I turn it on it vibrates, then the Samsung (in white) comes up then it goes to the black screen and stays there. Like its getting hung up. All happened after rebooting system in clockwork.
What ROM was on your phone. You mentioned 4.2.2 but I don't think ATT released a 4.2.2 ROM.
audit13 said:
What ROM was on your phone. You mentioned 4.2.2 but I don't think ATT released a 4.2.2 ROM.
Click to expand...
Click to collapse
I had a cyanogen mod on couldn't tell you which one exactly. My android version was the 4.2.2
what do you think of turning it back to stock, not that I want too?
You need to know which bootloader was on your phone before trying to restore to stock. The bootloader will determine how to restore the stock ROM.
First of all, boot into download mode and tell me what it says on the screen.
actually I had both twrp and clockwork both on there. Here is what is says on a start up downloader screen: A custom OS can cause critical problems in phone and installed applications.
If you want to download a custom OS, press the volume up key.
Otherwise, press the volume down key to cancel.
if you have terminal emulator on your phone , type in
getprop ro.bootloader (you need the space) and press enter. this will tell you your bootloader version.
err on the side of kindness
Either do what Mrrocketdog suggested or go past the warning message to the download mode.
oooopps! forgot about going past warning message. been a very long long time since been there. :thumbup:
err on the side of kindness
I never put emulator on my phone. Here is what I just did, I followed the Cyanogen d2lte to the T. Rebooted and now it is stuck on the Samsung GalaxySlll screen with the little blue android. I flashed both files thru my recovery. Again, everything started after I rebooted my system for the first time after installing the clockwork mod
I have no idea, but jst a though. Would it help to go to advanced, mounts and storage, in clockwork and format everything except my sd card?
bootloader is clockwork v6.0.4.7
CWM is the recovery, not the bootloader.
Boot to recovery. Format system, cache, data, flash cm11, reboot
thanks for being patient with me. i will try and let you know
. this site would be nothing without people like you.
here is what i did,(1) wipe dalvik and cache. (2) reboot(3)apply cynaogen bootloader update. (4) in this step it tried rebooting to recovery and not before applying cm11. when i reboot the system it gets stuck on the samsung galaxyiii with the blue android guy, the screen gets stuck right before it would boot to the cynagogen screen. again all my problems started when i added clockwork mod and rebooted. at that time i already had twrp. what would i have to do to remove clockwork mod or just help me just start from the begining drawing board. thanks.
tepeee said:
here is what i did,(1) wipe dalvik and cache. (2) reboot(3)apply cynaogen bootloader update. (4) in this step it tried rebooting to recovery and not before applying cm11. when i reboot the system it gets stuck on the samsung galaxyiii with the blue android guy, the screen gets stuck right before it would boot to the cynagogen screen. again all my problems started when i added clockwork mod and rebooted. at that time i already had twrp. what would i have to do to remove clockwork mod or just help me just start from the begining drawing board. thanks.
Click to expand...
Click to collapse
You need to wipe data, cache, dalvik, mount system, format system, install CM11, reboot.
audit, i did exactly what you said and nothing the same results. stuck on the samsung blue android screen.