Hi
I recently bought a HTC One X, and I must say that it has amazing speeds compared to both my HTC Mega and my phone before that, which was a Nokia N73. This leads me to an option I had on the N73, where I could tell the phone to prefer 3G and Hi-Speed(H), even if the EDGE(E) has a better connectivity than the others. But I can't seen to find any option in Android 4.0.4 which can help me do that. Is it possible at all? Do I have to get a specific app?
Open dialler and type *#*#4636#*#*
go to phone info
near bottom change wcdma preferred to wcdma only
Bear in mind if you go to somewhere that has no 3g coverage you will have no signal at all
and this change will drop off after a reboot
Sent from my HTC One X using xda app-developers app
Related
I have noticed people managed to change their network mode to GSM only mode??? How do you that?? I only have 2 options: WCMDA and GSM/WCDMA auto?? Is this thing vary due to your courier?? Currently I am with 3 Australia. I wish I have the option to switch only to GSM. From experience, it can save you a lot of battery.
If you don't have the option then you can't pick it. I don't know if that means it's been removed or if it's simply because 3 don't offer a 2G network service (GSM mode). They probably have some 2G sharing but only in spots without 3G so you still have the GSM/WCDMA auto mode.
That's the best I can offer since I know that's how it works with 3 over here in the UK where they have only their 3G network. The firmware likely has GSM mode disabled for that reason but wait for more to back me up or prove me wrong.
Dyonas said:
If you don't have the option then you can't pick it. I don't know if that means it's been removed or if it's simply because 3 don't offer a 2G network service (GSM mode). They probably have some 2G sharing but only in spots without 3G so you still have the GSM/WCDMA auto mode.
That's the best I can offer since I know that's how it works with 3 over here in the UK where they have only their 3G network. The firmware likely has GSM mode disabled for that reason but wait for more to back me up or prove me wrong.
Click to expand...
Click to collapse
I have a feeling it could be the ROM or firmware that comes with it has it disabled the GSM only option. My Desire HD is the UK version. I am not sure if the other Australian version (from Voda or 3) have that options. With my original desire (and also using 3), I have that GSM only option available. So I dont think it's because 3 doesnt offer 2G network.
Get Advanced settings from Market. You can set it to GSM Only in the phone information menu.
LecterMe said:
Get Advanced settings from Market. You can set it to GSM Only in the phone information menu.
Click to expand...
Click to collapse
Thank you for sharing..yes, it works....but I will try out and see if it does save a lot of battery life.
Type *#*#4636#*#* in the phone dialer to get to testing menu. Under phone info you can set different options that are not otherwise available. No app is required.
Sent from my HTC Desire using Tapatalk
ardsar said:
Type *#*#4636#*#* in the phone dialer to get to testing menu. Under phone info you can set different options that are not otherwise available. No app is required.
Sent from my HTC Desire using Tapatalk
Click to expand...
Click to collapse
Thanks for the info. I have tested both method...both work. But the only problem, how do we set it permanently?? I mean I have noticed every time you reboot the phone, the setting changes?? and I have to set it back to GSM only??
but even if you could technically switch it to gsm, would it actually make a difference? surely if the actual mobile network is pure 3g and no 2g, then switching on the phone wouldn't change a thing? as its not actually possible to use 2g on 3 network?(because they built network from scratch out of 3g is what they always boast about anyway..)
This is strange. I have an unbranded bought sim free HTC sensation here in the UK which Im using on the 3 network and I dont have the option under network to set it to gsm only. This option should be here on an unbranded handset, and its there on my old Desire which was also bought unbranded sim free when Im using that on the 3 network.
Anyone shed any light on this? I know the work arounds mentioned above, but Im more interested in why the option is missing on my handset.
Cheers
PS I know this is the Desire HD thread but its the only topic I could find on this subject so far.
I don't think it matters, just don't even bother with the settings menu for that in the first place. in the Testing menu just set the radio to either GSM Auto (PRL) or GSM Only. GSM gives more talk time.
Entering in the "secret" menu *#*#4636#*#*, i noticed that the default network mode is GSM/CDMA auto (PRL)
Aren't two completely different networks (and phone)? Or what that CDMA setting is referring?
Since my GNext is GSM and in my country there is no CDMA network operators, is that the best option regarding the battery life?
I remember that in my previous htc desire, the default network mode was WCDMA preferred (WCDMA different from CDMA), even if i was using GSM auto (PRL) which mean that if the 3g is low it will use the 2g network...and i remember there was nothing about CDMA network
So my doubt is why the Galaxy Nexus GSM doesn't have GSM auto (PRL) or WCDMA preferred as default option? is that a bug?
here a reference about the network mode http://www.google.ie/support/forum/p/android/thread?tid=6a327a95211ac789&hl=en
GSM = GPRS (2g), EDGE(2g), UMTS(3g), WCDMA(3g), HSDPA(3g) {Cell Carrier examples: AT&T and T-Mobile}
CDMA = CDMA*(2/3g) EV-DO(3g) WiMax(3/4g) {Cell Carrier examples: Verizon and Sprint}
Now that the general stuff is out of the way, here's my take on the Preferred Network types:
WCDMA preferred - The GSM phone is capable of using both 2G and 3G data communication and when signal strength is low 3G is favored more.
GSM only - The GSM phone is capable of using only 2G data communication. When the 2G signal is too low you get nothing at all.
WCDMA only - The GSM phone is capable of using only 3G data communication. When the 3G signal is too low you get nothing at all.
GSM auto (PRL) - The GSM phone is capable of using both 2G and 3G data communication and when signal strength is low 2G is favored more. This one is a bit confusing to me since PRL is associated mostly with CDMA technology and not GSM technology.
CDMA auto (PRL) - The CDMA phone is capable of using both 2G and 3G data communication and when signal strength is low 2G is favored more.
CDMA only - The CDMA phone is capable of using only 2G data communication. When the 2G signal is too low you get nothing at all.
EvDo only - The CDMA phone is capable of using only 3G data communication. When the 3G signal is too low you get nothing at all.
GSM/CDMA auto (PRL) - Some phones are equipped with both GSM and CDMA capabilities. This setting appears to just have the phone attempt to stay connected to the data communication type that works the best.
Click to expand...
Click to collapse
In addition seems there is no way to change the network mode in that menu on my gnext, the option i choice doesn't stick
andQlimax said:
Entering in the "secret" menu *#*#4636#*#*, i noticed that the default network mode is GSM/CDMA auto (PRL)
Aren't two completely different networks (and phone)? Or what that CDMA setting is referring?
Since my GNext is GSM and in my country there is no CDMA network operators, is that the best option regarding the battery life?
I remember that in my previous htc desire, the default network mode was WCDMA preferred (WCDMA different from CDMA), even if i was using GSM auto (PRL) which mean that if the 3g is low it will use the 2g network...and i remember there was nothing about CDMA network
So my doubt is why the Galaxy Nexus GSM doesn't have GSM auto (PRL) or WCDMA preferred as default option? is that a bug?
here a reference about the network mode http://www.google.ie/support/forum/p/android/thread?tid=6a327a95211ac789&hl=en
In addition seems there is no way to change the network mode in that menu on my gnext, the option i choice doesn't stick
Click to expand...
Click to collapse
Id like to know why the options dont stick as well... Just seems stupid to me that they dont stay after you choose them.
I have also been wondering the same thing. On the Nexus One and Nexus S it would default to WCDMA prefered and if I were to force 3G on it then it would stick on a reboot. On the GN if I put it to WCDMA only or GSM only it will revert to the GSM/CDMA auto (PRL) network type. It did this on stock 4.0.2 and it's also doing it on CM9.
In that menu there is something about LTE ram dump too. Is there a little more ram the LTE guys are getting that's hidden on GSM?
Sent from my Galaxy Nexus using Tapatalk
GSM auto (PRL) won't stick but WCDMA did for me but I REALLY regret changing it. It caused my SMSC number to change to 00 and I couldn't change it back on my GNex. It took me a while to figure out that the SMSC had changed and it stopped me from sending text messages but I could still receive them. After wiping and flashing a few times I realised and I put the sim card into an old phone and changed the SMSC back and put it back in my GNex and it let me send texts again.
3bs11 said:
GSM auto (PRL) won't stick but WCDMA did for me but I REALLY regret changing it. It caused my SMSC number to change to 00 and I couldn't change it back on my GNex. It took me a while to figure out that the SMSC had changed and it stopped me from sending text messages but I could still receive them. After wiping and flashing a few times I realised and I put the sim card into an old phone and changed the SMSC back and put it back in my GNex and it let me send texts again.
Click to expand...
Click to collapse
I am going to eat my own words but iv just done the same thing, can't send SMS. I don't have an old phone to put my sim in. I'm not sure what my SMSC was to change it back. Ideas?
Sent from my Galaxy Nexus using Tapatalk
The Gingerbread Man said:
I am going to eat my own words but iv just done the same thing, can't send SMS. I don't have an old phone to put my sim in. I'm not sure what my SMSC was to change it back. Ideas?
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
God it was a nightmare yesterday. I did a google search and found the number on vodafone forums for my country. What's your carrier? Even if you have the number maybe you won't be able to put it on your nexus like me but you can try. Another possible solution might be to get a new sim card but I'm not sure if that'll work. I just read it online.
Sent from my Galaxy Nexus using Tapatalk
The Gingerbread Man said:
I am going to eat my own words but iv just done the same thing, can't send SMS. I don't have an old phone to put my sim in. I'm not sure what my SMSC was to change it back. Ideas?
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
OK try +44-7973100973 for orange uk
Sent from my Galaxy Nexus using Tapatalk
Thanks shall give it a try!
Sent from my Galaxy Nexus using Tapatalk
The Gingerbread Man said:
Thanks shall give it a try!
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
Good luck. Let me know if it works or not.
3bs11 said:
Good luck. Let me know if it works or not.
Click to expand...
Click to collapse
Apparently not. The annoying thing is there is thing OEM specific carrier info button which is greyed out, I bet that would sort out my settings.
Sent from my Galaxy Nexus using Tapatalk
The Gingerbread Man said:
Apparently not. The annoying thing is there is thing OEM specific carrier info button which is greyed out, I bet that would sort out my settings.
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
Mine is greyed out too so maybe that doesn't change anything in this case. I guess your best bet is trying to put the sim card into another phone and set the SMSC number on that phone then plug it back into your GNex. I used an old blackberry
3bs11 said:
Mine is greyed out too so maybe that doesn't change anything in this case. I guess your best bet is trying to put the sim card into another phone and set the SMSC number on that phone then plug it back into your GNex. I used an old blackberry
Click to expand...
Click to collapse
Yeah, might be borrowing my mums Nokia at this rate lol Did you find if you tried to copy and paste numbers into the smsc area it caused a force close for 'phone'?
I did come across http://smsclist.com/downloads/default.txt which looks pretty handy to have around
Sent from my Galaxy Nexus using Tapatalk
The Gingerbread Man said:
Yeah, might be borrowing my mums Nokia at this rate lol Did you find if you tried to copy and paste numbers into the smsc area it caused a force close for 'phone'?
I did come across http://smsclist.com/downloads/default.txt which looks pretty handy to have around
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
Force close for phone as in the app?
3bs11 said:
Force close for phone as in the app?
Click to expand...
Click to collapse
Yeah haha I'm sorted now anyway thanks for your help, I can finally send messages again but had to set the message centre on my mums phone lol I'm relieved!
Sent from my Galaxy Nexus using Tapatalk
The Gingerbread Man said:
Yeah haha I'm sorted now anyway thanks for your help, I can finally send messages again but had to set the message centre on my mums phone lol I'm relieved!
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
Glad to see it worked. I actually went back to stock and rooted again and flashed AOKP and all that just to fix this and then realised all that wasn't necessary lol. I wonder if everyone switching to WCDMA only is having this issue or just us?
3bs11 said:
Glad to see it worked. I actually went back to stock and rooted again and flashed AOKP and all that just to fix this and then realised all that wasn't necessary lol. I wonder if everyone switching to WCDMA only is having this issue or just us?
Click to expand...
Click to collapse
Gutted! Mine doesnt want to stick with WCDMA but I'm happier with my phone fully working again. I hope no one else gets this and I'm grateful for your help. I never had this particular problem before and I'm glad I know how to sort it next time if needs be
Sent from my Galaxy Nexus using Tapatalk
SMSC update
for refenrece about the above problem updating the SMSC i found this link
http://community.windmobile.ca/windmobile/topics/nexus_s_smsc_advanced_menu_options
its for the nexus s, but it works also on our galaxy nexus
so basically with our nexus (also other samsung i guess) through the advanced menu *#*#4636#*#*, u can update the SMSC only putting the encoded value like described in the link above
also the important things are the 2 buttons near the SMSC field:
- the first on the left (nearest the field) mean refresh: basically should load ur actual SMSC (sometimes don't work)
- the second on the right (far from the filed) mean update: so it change ur SMCS with the actual value on the field..so be carefully if the field is empty
(in my language the translation of those button are wrong, and both have the same label..thats why im explaining it )
anyway i suggest to don't play with the *#*#4636#*#* menu at all, unless u have problems
hope this helps some future users
I need help. Im in the US on AT&T. Im having the same problem sending sms. I can receive them but just cant send them. I think i messed up my smsc. Messing around with*#*#4636#*#*.I dont know what to do. Im running stock rom. Can somebody help me and tell what number need to put in. Im kinda lost. Gsm galaxy nexus in the use on ATT
Geng ....
I'm living in Japan and using Softbank as carrier.
I got the One X international version (from Plemix Hong Kong), and I installed the ARHD after rooting my device (Also I tried several custom ROMs).
The problem is there is no 3G connection anyhow, when I switch to 3G it always says disconnected..!!
previously, I have had my HTC Desire HD, and it is working well in 3G and the data transfer is good.
- I'm using the same SIM card (after I cut it to micro one) from Desire HD to One X.
- In both devices the APN settings are the same.
- When I put back the SIM card to my Desire HD, it works very well..!!
So, somebody help me and tell me where is the problem.
Sorry for long message and wish to find a solution..!!
I got the same on my One X. My carrier is Tele2 ans they claim that their network is down due rebuilding, which is not true. Somehow I regret that I took this phone at them.
They will send a new SIM to see if that helps. Otherwise a reparation is needed.
Sent from my HTC One X using xda premium
Have you made sure you have the right radio? Not sure what your should be, but you get them here;
http://forum.xda-developers.com/showthread.php?t=1689679
Guessing it should be Radio_1.1204.103.14 （Asia Pasific）
Long-shot: Not sure if this will help, but whenever my phone occasionally refuses to reconnect to 3G I toggle the settings in the Phone Information Menu from WCDMA Preferred to CDMA Auto (PRL)
After a few seconds the phone automatically jumps back to WCDMA Preferred and it can then reconnect the 3G network. Sometimes toggling airplane mode doesn't do it.
Does 3G on the One X work when stock on SoftBank? I'm considering buying this phone from Expansys and using it on SoftBank's network.
Hello
I have a problem with my one x, it does not capture well the mobile network, while on another one x and others smartphone that captures very well the network
I gave him a flash with ruu last updated 2.17; May I always the problem
So I wonder if this is just a software problem that I can adjust itself, or it is a hardware problem and that I should return the phone in this case to the dealer
thank you
octopus82 said:
Hello
I have a problem with my one x, it does not capture well the mobile network, while on another one x and others smartphone that captures very well the network
I gave him a flash with ruu last updated 2.17; May I always the problem
So I wonder if this is just a software problem that I can adjust itself, or it is a hardware problem and that I should return the phone in this case to the dealer
thank you
Click to expand...
Click to collapse
Some roms and some versions come with the radio configured to WCDMA only, meaning that it will only connect to 3G and HSPDA networks, most phones are set to WCDMA when available and GSM when not, so the phone skips from one to another depending in signal strengh.
in settings go to mobile network, there should be an option there called network mode, see if its set to WCDMA only or GMS/WCDMA Auto.
Aevum said:
Some roms and some versions come with the radio configured to WCDMA only, meaning that it will only connect to 3G and HSPDA networks, most phones are set to WCDMA when available and GSM when not, so the phone skips from one to another depending in signal strengh.
in settings go to mobile network, there should be an option there called network mode, see if its set to WCDMA only or GMS/WCDMA Auto.
Click to expand...
Click to collapse
Thank's
when I put this option in gsm only I have not network at all; but when put it into gsm an dcma I have network but it is unstable, sometimes I have one bar network, sometimes two and sometimes full but it leaves immediately after, and when I called I got a notification for setting the time zone so that it is already set
thank you again
I hace an htc m9 sprint. I have some issue because I cant select just 2G (when I'm in bad reception area), or in my signal bar there is just a G (dont know If I'm on 3G or 2G).
So I want to know if its ok to select that my device is not sprint in aroma (for custom roms of course). I'm not S-OFF.
Or there is any way to force my sprint version to show H, H+, E Icons on signal bar instead of GSM?
Nope, it is what it is. G is for gprs which is basically 1.5G. If your phone cannot lock onto a higher bandwidth there is nothing you can do because it simply isnt there.
No matter how many rain dances you do or human sacrifices you make, you can't make the phone do it.
Beamed in by telepathy.
Please search via google for the difference between GSM and CDMA. Since those are two different technologies chances are high that you can't get high speed connections if you try to use a CDMA device on a GSM network or vice versa. Hardware and partition layout differ between the CDMA and the GSM versions of the M9.
The options in the aroma installer are meant to be chosen according to the hardware you're using and not according to your actual carrier.
Sent from my HTC One S using XDA Labs
I know about that, but the speeds are good. Like any other 3G phones. I just want the options to force for example just 2G when I'm on 3G low signal area. and show the corrects icons. The phone was from a friend first, and he told me that before upgrading, shows H on signal bars. If I go to about, network, here say HSPA