Xperia Arc S, big problem - Xperia Arc Q&A, Help & Troubleshooting

Well here it is, my Xperia Arc S originally had a problem where the display kept turning itself on so i did some reading and apparently it might have been some software, so i tried doing a factory reset and that didn't work. So i tried flashing it on Flashtool but then i realised i couldn't because everytime i turned my phone off it would turn itself back on so i couldn't put it in boot mode. And now i can't even get past the Sony Ericsson logo when i boot up so i think of anything to do now because i can't flash it and turn it on. Please can someone help me.
Side note i did drop my phone in water a few weeks ago and there were problems with it booting but i thought it was resolved because they disappeared.

PenguinJr said:
Well here it is, my Xperia Arc S originally had a problem where the display kept turning itself on so i did some reading and apparently it might have been some software, so i tried doing a factory reset and that didn't work. So i tried flashing it on Flashtool but then i realised i couldn't because everytime i turned my phone off it would turn itself back on so i couldn't put it in boot mode. And now i can't even get past the Sony Ericsson logo when i boot up so i think of anything to do now because i can't flash it and turn it on. Please can someone help me.
Side note i did drop my phone in water a few weeks ago and there were problems with it booting but i thought it was resolved because they disappeared.
Click to expand...
Click to collapse
Phone cannot turn on itself. Unless you have charging cable attached and it goes to charging mode.

Someguyfromhell said:
Phone cannot turn on itself. Unless you have charging cable attached and it goes to charging mode.
Click to expand...
Click to collapse
UPDATE: I was able to flash 4.0.4 firmware onto the phone after repeatedly trying to get it into flash mode but the problem still remains, the display keeps turning on by itself and whenever i switch the phone off i hear a small vibration and it turns itself on (with no charger attached), i'm thinking there might be a problem with the power button but i'm not sure.

bump

Does the button act any other way than normal?

Someguyfromhell said:
Does the button act any other way than normal?
Click to expand...
Click to collapse
You mean does it feel different? Like the clicking? It feels fine to me, plus when i'm using the phone the screen doesnt just turn off, its only when i put the phone to sleep it turns the display back on and then it turns off again and so on. It behaves as it should when i press it

I didnt drop it in water on purpose, i meant i dropped it and there were issues with it booting up, i left it in rice overnight and it was fine the next day

true true
PenguinJr said:
I didnt drop it in water on purpose, i meant i dropped it and there were issues with it booting up, i left it in rice overnight and it was fine the next day
Click to expand...
Click to collapse
I now what you mean, I have same problem with mine. The screen flash like if it had unanswered phone calls its really anoying. My phone never had any accident until now as well. The gap betwen screen flashing can go from 30s up to a minute. Sometimes it stops and goes again. any sugestion?

bloody27 said:
I now what you mean, I have same problem with mine. The screen flash like if it had unanswered phone calls its really anoying. My phone never had any accident until now as well. The gap betwen screen flashing can go from 30s up to a minute. Sometimes it stops and goes again. any sugestion?
Click to expand...
Click to collapse
In first case power button died from water probably (you fu**d it up by dropping it in water, rice wont help). Second is software problem try factory reset or flashing phone...

Related

[Q] Help!! a100 Blackscreen

i have a a100 with the latest flexreaper rom installed and im stuck with a pretty serious issue:
a couple of days ago the tab was acting real slow and sluggish and getting bad battery life didnt think nothing of it so i just rebooted a couple times and left it alone . all was good untill the battery hit 10% and i plugged it up using the factory ac adapter. the next day (maybe 6-7 hours later) i went to turn it on and nothing no vibrate no screen flash nothing; other than the power button turning blue as i pressed it and it would stay on for a couple hours but still no other response from the tablet.
im at my wits end on what could be wrong and now i got my wife with her foot on my neck till i get it fixed. can anyone help me?
ive tried to do a hard reset with the reset button tried to boot into recovery /bootloader no dice
(also my home button flashed a couple time i pressed the power button) dont know if its relevant but wanna get as much info out as possible
wondering if anyone can help me...
frenize said:
wondering if anyone can help me...
Click to expand...
Click to collapse
It may take awhile for someone to see this and form something to try, random bricking for no reason is rare, its almost always some error by the user. However have you attempted adb connection to it? Leave it powered off, connect to the PC you used to unlock the boot loader then power on. Does the PC make the USB connect sound? Does the Acer vibrate? Did the home key blink again?
It really sounds like your boot partition is wrecked which wouldn't normally happen outside of flashing. If boot loader is trash then it won't know what to do and just sit there. No recovery or anything else.
Tapatalked from my Galaxy S II.
pio_masaki said:
It may take awhile for someone to see this and form something to try, random bricking for no reason is rare, its almost always some error by the user. However have you attempted adb connection to it? Leave it powered off, connect to the PC you used to unlock the boot loader then power on. Does the PC make the USB connect sound? Does the Acer vibrate? Did the home key blink again?
It really sounds like your boot partition is wrecked which wouldn't normally happen outside of flashing. If boot loader is trash then it won't know what to do and just sit there. No recovery or anything else.
Tapatalked from my Galaxy S II.
Click to expand...
Click to collapse
it made something like the connect sound but instead of the regular duh doom sound it did a dadadoom (kinda hard to describe the sound) but it was faster than ive ever heard the connect sound before which is weird. the tab didnt vibrate and it seems the home button blinks when the tab is dead and needs recharged
frenize said:
it made something like the connect sound but instead of the regular duh doom sound it did a dadadoom (kinda hard to describe the sound) but it was faster than ive ever heard the connect sound before which is weird. the tab didnt vibrate and it seems the home button blinks when the tab is dead and needs recharged
Click to expand...
Click to collapse
Yeah I know that sound it means USB connected but error for some reason. Its been shown if this thing dies all the way down it wont read the battery correctly and probably needs to be sent in. Before that I personally would unplug it open it up and remove the battery for awhile, maybe an hour then put it back and plug it in. But thats me, not the advice I'm giving. If you have warantee on it use that.
The batteries on a lot of devices and laptops etc have something of a fail safe, if the voltage drops below a certain point it trips to prevent cell damage, however it renders the battery useless.
I haven't searched out much past that if a reset is possible by us, but it seems the pack is trash after or needs sent in.
Since this is a sealed unit you void warranty opening it (well unlocking the boot loader did too) so you can't send it in for repairs without paying for it.
I hope someone can jump in and help figure this out, and prove me wrong.
Tapatalked from my Galaxy S II.
Weird, This exact same thing happened to me. Used it in the morning and now after work it won't turn on. I had already tried disconnecting the battery, but hadn't thought to leave it disconnected for an hour. My tablet has been running the leaked ICS since it came out and The last factory reset it had was about a month ago. It was working fine up until this. The power button seems to be responding correctly, the issue is that after the LEDs light up, there is no vibration or display. I hope someone can help us with this issue.
EDIT:
It won't connect in ADB mode. It will only appear on my computer as an APX device and since there is no vibration I am unable to boot into fastboot. Any help or suggestions? All the threads I have found have involved booting into fastboot.
i am also having this problem. i set ti backup last night to save to box i turned it on this morning it.worked set it on the charger came back to a frozen screen. I turned it off now just a black screen it turns on or the home button dose but nothing comes up on the screen
same thing here.
max69power said:
i am also having this problem. i set ti backup last night to save to box i turned it on this morning it.worked set it on the charger came back to a frozen screen. I turned it off now just a black screen it turns on or the home button dose but nothing comes up on the screen
Click to expand...
Click to collapse
I have been using ICS the leaked one, and last night I was goint to check my email and it did not turn on, I though the battery died. I plugged to the charger and this morning I tried to turning it on but it failed. I did the reset pin but nothing. I connected to the computer and it was recognized as a APX device and installed a driver ACER Picasso USB recover but i cant access anything. I am a nob. Thanks
A100 blackscreen
i am also having this problem. last night. just a black screen it turns on or the home button dose but nothing comes up on the screen. :crying: Help!!!!!!
Has anyone tried holding the power button for a while? Laptops do this too, if someone felt ventures, try taking the battery out and hold the power button. No promises, might work.
sent from my ICONia
same here
Having the exactly same issue, here...
I also tried to hit the hardware reset button and it does not help.
If the screen is blank while powered on its in failsafe mode, in other words is bricked, has to go to Acer.
Tapatalked from my Galaxy S II.
This just happened to me a few weeks ago as well. If you are still under warranty send it in to Acer, thats what I did. I just got an email saying they had fixed it and were sending it back for free!!
At the time I was on the 9/02 JB build. I wonder if this issue is caused by faulty hardware or if it is an issue that was made by rooting and unlocking it? I don't know enough about this stuff to answer that though, but it does make me think whether I should root/unlock it when I get it back or leave it stock.
Also thanks Pio_masaki for helping me a few weeks back wasn't sure if I was even going to send it in until you said they most likely won't be able to tell.
I highly doubt they even CARE when sending these in. They will void for physical damage most likely.
tshm55 said:
Having the exactly same issue, here...
I also tried to hit the hardware reset button and it does not help.
Click to expand...
Click to collapse
Ohmygod,
Same here, but it's 3 years ago. Sorry for digging the topic. Still no hope? I still keep the tablet and have just buy another refurbished mainboard to replace but still no vibrate and blacksreen still there.

My Xperia Arc S doesn't want to turn on anymore

Hey
My phone stopped working.
A few weeks ago it suddenly didnt turn on anymore
The evening before i put it in charge coz it only had 6% left.
The next morning it didnt do anything
no led light, didnt turn on.
When i try to boot fastboot mode, the light doesnt turn on. when i put it in charger, the light doesnt turn on, my computer doesnt recognize it.
i tought lost case, its dead.
but this morning i tried to turn it on one time, it didnt work. i put it on my desk. i accidently wiped the phone off my desk, it turned on.
It showed Sony Ericsson logo, as im used to, the screen lights up very bright for a second, normaly the key lights and the led should turn on, that didnt happen.
then it went to a black screen, and turned off after a few seconds.
after that it didnt turn on anymore
Maybe the worst part: coz my father is going to buy an iPhone 5, he wants to give me his 4
is there anything i can do? I no longer have warranty.
Have you tried removing the battery, pressing power, then letting it charge for a couple of minutes, and then try to turn it on? Maybe it's really completely empty.
You had anything custom in there?
Did you use the original charger?
As I can understand, phone does not go into flashmode (while turned off, back button and connect USB cable) or fastboot mode (same thing but menu button)?
sdk16420 said:
Have you tried removing the battery, pressing power, then letting it charge for a couple of minutes, and then try to turn it on? Maybe it's really completely empty.
Click to expand...
Click to collapse
Yes. And i put the fully charged battery off my friends arc s in.
No luck
Someguyfromhell said:
You had anything custom in there?
Did you use the original charger?
As I can understand, phone does not go into flashmode (while turned off, back button and connect USB cable) or fastboot mode (same thing but menu button)?
Click to expand...
Click to collapse
It is unlocked and running x-gamer rom
It doesnt work in fastboot either flashmode
But its somehow a little working.
I got it booted up! But the screen changes in a snow-like fuzzy screen, makes a weird noice and turns off.
I think its fried, isnt it?
Sent from my sending thing..
Stupid Macbook Air can't fly
WTF it turned on and is working
But its not useable and turns off every 10 minutes :sly:
Sent from my severe damaged phone..
Motherboard severe damaged
Help
I had my arc s running on official ics. i rooted the mobile just 2 days back and i installed font installer and installed a custom font. but when i restored my original files it restored and asked for a reboot when i pressed yes the phone went black then turned on partially (sony screen>xpeia screen) then after that the phone restarts please help me with this issue im a new android user...
malith1995 said:
I had my arc s running on official ics. i rooted the mobile just 2 days back and i installed font installer and installed a custom font. but when i restored my original files it restored and asked for a reboot when i pressed yes the phone went black then turned on partially (sony screen>xpeia screen) then after that the phone restarts please help me with this issue im a new android user...
Click to expand...
Click to collapse
Repair the firmware with PC Companion, or if you wish to take the advanced way - Flashtool.

[Q] Help - Glide crashes and restarts

I bought a Samsung Glide i927 phone last month in the US, i bought it unlocked as i am from argentine, and i wanted to use it with movistar.
Recently the phone started to crash a lot, by that i mean that the screen starts going white, with horizontal lines and pixels of different colors appearing, then just turn off or restarts itself, only to crash again as soon as it starts an then turns off.
When this happens i try to start the phone and select the shut down option myself to see if the next time it starts it doesnt crash. But sooner or later it happens again.
This problem its happening too often, and not while doing something in particular like running an app or something. Sometimes it crashes just by plugging it to the power adapter, it even shows the white screen with the lines instead of the charging battery image when i charge it while turned off. I have already try to fix it upgrading android or doing a factory reset, but that didnt work.
Anyone have any idea of how to resolve the problem, or if its a hardware malfunction that cant be fixed?
To make things more difficult, as i said earlier im from argentine, and i cant go to AT&T or Samsung to get it fixed or get a replacement. English is not my first language, so please forgive my orthographic mistakes.
Thanks
This really sounds like some hardware problem, but to be safe, learn how to use Odin and use it to revert your phone to completely stock condition (cleaner than factory reset).
Sent from Samsung Captivate Glide @ CM10.1.2
AndyYan said:
This really sounds like some hardware problem, but to be safe, learn how to use Odin and use it to revert your phone to completely stock condition (cleaner than factory reset).
Sent from Samsung Captivate Glide @ CM10.1.2
Click to expand...
Click to collapse
I tried to do that, but the first times when Odin try to reboot the phone it just freezes and i have to unplug it. After many tries it finally finished, but the phone keeps freezing and crashing.
The phone even crashes while turned of and conected to the power adapter.
Do you think that with LiteROM 0.9.0, that might fix this issues?
I've got reboots too, try to disable auto brighness
It helps for me
Sent from my SGH-I927 using xda app-developers app
Power button issue
I am having a similar problem. At first, it just happened on rare occasions. However, today, it started doing it repeatedly. The phone was unusable. I did some checking around, and it appears that the power buttons on Samsung phones are prone to sticking. Some people suggest you actually remove the battery and slam the power button against a table. I wasn't going to do that, because I could just see it doing even more damage. What I did instead was firmly tap the power button repeatedly. It seemed to unstick the power button and allow the phone to function again.
Another alternative is to have the power button replaced, but that might be a hassle.
First of all, sorry for my bad english.
I bought it on amazon a few days ago, I have the same problem...
I thing aznemesis is right, because my power buttom is very sensitive, in fact, some times, when I press the button smooth and fast, to turn off the display like, the typical menu appears as if I had pressed the button for much longer period. Which proves your theory. The problem is if I hit the button over a table and the button breaks here in Chile do not exist spares of the terminal
Well, I did. I couldn't stand the desire to do so. After nearly 18 hours, the terminal isn't rebooted again.
Panchon1978 said:
I bought a Samsung Glide i927 phone last month in the US, i bought it unlocked as i am from argentine, and i wanted to use it with movistar.
Recently the phone started to crash a lot, by that i mean that the screen starts going white, with horizontal lines and pixels of different colors appearing, then just turn off or restarts itself, only to crash again as soon as it starts an then turns off.
When this happens i try to start the phone and select the shut down option myself to see if the next time it starts it doesnt crash. But sooner or later it happens again.
This problem its happening too often, and not while doing something in particular like running an app or something. Sometimes it crashes just by plugging it to the power adapter, it even shows the white screen with the lines instead of the charging battery image when i charge it while turned off. I have already try to fix it upgrading android or doing a factory reset, but that didnt work.
Anyone have any idea of how to resolve the problem, or if its a hardware malfunction that cant be fixed?
To make things more difficult, as i said earlier im from argentine, and i cant go to AT&T or Samsung to get it fixed or get a replacement. English is not my first language, so please forgive my orthographic mistakes.
Thanks
Click to expand...
Click to collapse
The horizontal lines on the screen sound as if it is an overheating issue. What were you doing before your phone shut off? Are you using the factory charger?
cure found
take the battery out...blow on the power button with some compressed gas to get the dust out....then pour a drop of silicone based lubricant on the power button so that most of it gets in the gaps...then hit the power button a few times....haven't had any reboots since then

[Q] Phone stuck in screensaver mode

Hi!
I brought my Xperia Play phone USED two years ago and I've never had any problems with it.
However, recently, the phone has started to freeze itself in "screensaver" mode (Where the screen goes black after 15 seconds and locks the phone), but the screen won't light up no matter which button I press. I've had to restart the phone every time this happens.
It's been behaving strange at start up as well, as it sometimes take 20 minutes just for it to turn on, while on other occasions, it won't turn on at all!
Is this problem caused by the battery, or is it the hardware?
Is it with stock firmware?
Vortelf said:
Is it with stock firmware?
Click to expand...
Click to collapse
Yes.
I've never modded it or installed custom firmware/apps.
Have you tried factory resetting it?
Vortelf said:
Have you tried factory resetting it?
Click to expand...
Click to collapse
Yes, but it didn't fix it. The problem still occurs.
tldr: Black screen, no display, everything works "under" (I can answer the phone etc). Not a flex cable problem because occurs randomly, regardless of the slider being open or closed. The problem also occurs during boot up, so rather not a software problem.
I think I have something similiar. Everything was fine until a few days ago the screen didn't want to unlock..or at least I thought it was that.
Basically the phone sometimes works OK but sometimes if I turn off (lock) the screen, it won't go back. To be precise, the phone works and if someone calls me I can pick it up moving the finger where the slider should be, it's just the display doesn't turn on. Same goes for booting, bootloader logo etc, so IMO it's not a software problem.
Strange thing is that it just randomly pops back, sometimes when I move the gamepad slider, sometimes when I put in a jack cable or if I hard reset the phone (remove battery). I've had problems with the flex cable in the past and this time I know that it's not it (no difference if I open/close the slider).
My guess would be some power supply or LCD driver IC issues, because the screen stops working almost everytime if I put the phone into the dock. Moreover, if the screen doesn't work, the orange charging LED is not working (green and blue are OK). The moment the screen starts working, the orange charging LED starts working too.
it's very strange but I'm used to electronics doing strange stuff. Just wondering if I should give a try disassembling the phone and trying to fix it or just buy a new one or something?
I might add that I have bought a new battery ~3 months ago, but it's been working fine to this point. I have tried if the same problem occurs with the old/original battery and it's the same.
well, any ideas?
edit: This video shows something very similiar (except the backlight): https://www.youtube.com/watch?v=m4p0-kv1cxA
Same problem. And I guess this guy has it too.
http://forum.xda-developers.com/xperia-play/help/problem-flex-cable-brightness-t2803991
Any help?

Black Screen

When I was using this phone the screen suddenly turned black. No powering off or anything, the phone was nearly fully charged anyway. Nothing seems to be working anymore. I tried turning it back on but it's completely unresponsive. It won't even charge anymore. I was wondering if there was any solutions to this and if other people where having this problem or did my phone just brick itself
Are you able to get to the bootloader? by pressing volume + and power at the same time. It may be worth trying to flash stock also. I am no expert its just what I would try.
MrPureskill said:
When I was using this phone the screen suddenly turned black. No powering off or anything, the phone was nearly fully charged anyway. Nothing seems to be working anymore. I tried turning it back on but it's completely unresponsive. It won't even charge anymore. I was wondering if there was any solutions to this and if other people where having this problem or did my phone just brick itself
Click to expand...
Click to collapse
try using spflash all format + download flash stock rom
MrPureskill said:
When I was using this phone the screen suddenly turned black. No powering off or anything, the phone was nearly fully charged anyway. Nothing seems to be working anymore. I tried turning it back on but it's completely unresponsive. It won't even charge anymore. I was wondering if there was any solutions to this and if other people where having this problem or did my phone just brick itself
Click to expand...
Click to collapse
look here and flash stock rom again
http://forum.xda-developers.com/elephone-p8000/help/how-to-guideline-install-mtk-drivers-t3334698
Hello there. I have the same problem, phone suddenly stopped to show anything on the screen, it is comleptely black. Tried to reflash few original roms, without a succsess. Replacing lcd did also not solved the problem. Did anyone find a solution?
Thanx
Did you try to format + reflash using spflash? Check out my video walk thru.
https://youtu.be/rzKll-HG6rQ
Sent from my p8000 using Tapatalk
Of course I did. But at no avail. Today, I found out, that the new screen is partially working. I can see very dark picture, it means, I have no back light. Tried to set it up from engineers mode, but no luck.
So the new screen is on, but without back light, and the phone heats pretty much in the top area.
storm525 said:
Of course I did. But at no avail. Today, I found out, that the new svreen is partialy working. I can see very dark picture, it means, I have no backlight. Tried to set it up from engineers mide, but no luck.
So the new screen is on, but without bacjlight, ans the phone heats pretty much in the top area.
Click to expand...
Click to collapse
If so. Try to pull down the statusbar and swipe a bit under the statusbar line, in the top of the screen from left to right, with some luck you will tap the brightness switcher
Gesendet von meinem Metal mit Tapatalk
I can connect to the phone through Vysor, and when I change the brightness level there, there is no change at all. The Phone does not react to any settings change at all.
Tried eragon rom, but still no change....
storm525 said:
Hello there. I have the same problem, phone suddenly stopped to show anything on the screen, it is comleptely black. Tried to reflash few original roms, without a succsess. Replacing lcd did also not solved the problem. Did anyone find a solution?
Thanx
Click to expand...
Click to collapse
Better hope you still have your garantie, because theres legit no way to restore it. You just have to send it back for it to get fixed. This happened to me once and yesterday twice. sadly I am to dissapointed from this. I am never buying an Elephone again ! PS bro it isnt worth sending this hell of a **** peace back. It costs and the blackscreen thing is gonna happen again in 6-8 months. SO go out there and buy yourself a real phone not this bull****. I have to do the same rn.
P8000 unrespnosive Fix
MrPureskill said:
When I was using this phone the screen suddenly turned black. No powering off or anything, the phone was nearly fully charged anyway. Nothing seems to be working anymore. I tried turning it back on but it's completely unresponsive. It won't even charge anymore. I was wondering if there was any solutions to this and if other people where having this problem or did my phone just brick itself
Click to expand...
Click to collapse
Just happened to me with my 3 year old phone. Left overnight with enough charge. Pressed the side button and nothing - held it down to restart and then complete blank.
Repalced the battery about 1 month ago with one from AliExpress for £5.
So using the kit provided with the battery or a watchmakers screwdriver - undo the 12 tiny screws and remove the white surround and then the inner back with the phone's number on it. Next disconnect the battery socket but be careful as it is tiny - use a torch and magnifier if vision not good. Remove the sim card. Wait 10 minutes - did this with the blue light flashing - it stopped finally on disconnection.
Put it all back together and hey presto fully working phone

Categories

Resources