Related
Stuck on the samsung logo.
The battery drained dead, and I waited until I got home to charge it. I plugged it in and the grey battery popped up and a loading wheel, but it froze.
Now it doesn't turn on. I switched batteries and it goes to the samsung logo and sits there. I tried VolUP+VolDown+HOME+Power and All the other button combos and still nothing just goes to samsung screen and reboots, then I notice the led light flashes red very faintly and once quickly then the logo comes back up.
Any ideas?
Did you root or install custom recovery?
kirkla79 said:
Did you root or install custom recovery?
Click to expand...
Click to collapse
No I haven't tried to do anything of the sort. I just got this phone when it got released, and haven't explored that much with it yet. It just suddenly doesn't work after the battery drained dead.
I would just go back from where you bought it a get it exchanged then.
kirkla79 said:
I would just go back from where you bought it a get it exchanged then.
Click to expand...
Click to collapse
Yeah I'm just going to hate to lose everything because I couldn't do a backup...
Sucks.
Root install recovery and clear cashe partition and dalvik cashe. Use stock rom image with SU injected and do not wipe. Or exchange and loose everything
Sent from my SAMSUNG-SGH-I317 using XDA Premium HD app
My girlfriend drained her battery until the phone shut off. Had to leave it on the charger for almost an hour before it would boot. I thought it should boot as soon as I plugged it in but that's not the case. Try letting it sit and charge for awhile.
jethro650 said:
My girlfriend drained her battery until the phone shut off. Had to leave it on the charger for almost an hour before it would boot. I thought it should boot as soon as I plugged it in but that's not the case. Try letting it sit and charge for awhile.
Click to expand...
Click to collapse
I left it on the charger for almost 3 hours. And nothing, not even the loading icon over the battery would disappear.
Could someone point me in the right direction for rooting etc... as the user described above?
PrestigeA said:
I left it on the charger for almost 3 hours. And nothing, not even the loading icon over the battery would disappear.
Could someone point me in the right direction for rooting etc... as the user described above?
Click to expand...
Click to collapse
Not sure your going to be able to root with a non-booting phone. Here are a couple links about rooting
Chainfire's method you need download mode
mrRobinson's root injected stock Roms, also need download mode
Good luck hope one of these works for you.
Just my $0.02 worth.
My suggestion is make sure you are using the original, Samsung battery. Let it charge for 8 - 10 hours. Take it off the charger, remove the battery from the phone, wait several minutes; then replace the battery and try to boot.
If that doesn't restore, I'd take it back to the store from which you purchased it, and see if a new, oem battery will let it boot. The store should try to do everything they can to help, short of replacing the phone. But it may just be your phone has gone bad -- in which case rooting isn't going to help...
Good luck.
PrestigeA said:
I left it on the charger for almost 3 hours. And nothing, not even the loading icon over the battery would disappear.
Could someone point me in the right direction for rooting etc... as the user described above?
Click to expand...
Click to collapse
Intall CWM with odin then reboot in recovery and install stock rooted .zip or stock based ROM. Its called a dirty install. You can do this by placing the .zip in a microSD then install from external in CWM. You will end up with all your old crap but the .zip will replace your corrupted files. I recommend you save everthing as soon as it boots and yhen do a clean install of whatever ROM you want even if its stock.
Sent from my SAMSUNG-SGH-I317 using XDA Premium HD app
reinstalled stock ROM, stuck on logo
I recently got an AT&T note 2. I rooted and installed cwm recovery. I tried installing Android Revolution HD 5.0 after running their superwipe script. Everything went smoothly except the SIM was not recognized. I couldn't get it to work so I tried 2 other ROMs and I had the same issue. I decided to go back to stock and wait for Cyanogen to release a ROM.
The issue I am having now is that the stock ROM downloaded from http://forum.xda-developers.com/showthread.php?t=2004650 and another stock ROM (KIES_HOME_I317UCALJ2_I317ATTALJ2_215287_REV04_user_low_ship.tar) won't boot. I can successfully push them to the phone from Odin, but then they reboot and get stuck on the Samsung logo. The phone doesn't give any error messages, no strange leds on, no reboots, it just sits there with the Samsung logo pulsing. I can still boot into the download mode (vol down, home, power).
Any advice on how to get to a functoning ROM? At this point I don't care if it is stock or custom, I just need something that works. Any help would be greatly appreciated!
cdt710 said:
I recently got an AT&T note 2. I rooted and installed cwm recovery. I tried installing Android Revolution HD 5.0 after running their superwipe script. Everything went smoothly except the SIM was not recognized. I couldn't get it to work so I tried 2 other ROMs and I had the same issue. I decided to go back to stock and wait for Cyanogen to release a ROM.
The issue I am having now is that the stock ROM downloaded from http://forum.xda-developers.com/showthread.php?t=2004650 and another stock ROM (KIES_HOME_I317UCALJ2_I317ATTALJ2_215287_REV04_user_low_ship.tar) won't boot. I can successfully push them to the phone from Odin, but then they reboot and get stuck on the Samsung logo. The phone doesn't give any error messages, no strange leds on, no reboots, it just sits there with the Samsung logo pulsing. I can still boot into the download mode (vol down, home, power).
Any advice on how to get to a functoning ROM? At this point I don't care if it is stock or custom, I just need something that works. Any help would be greatly appreciated!
Click to expand...
Click to collapse
You should only flash ROMs from the "AT&T Galaxy Note II Android Development" section. I think Revolution HD is not an AT&T ROM, I don't know about the other ROMs you flashed (as you didn't say what they where). Those ROMs probably flash a non AT&T compatible radio on you phone. You should read and re-read and make sure you know what to do and what ROM can can flash before you start flashing.
Do you have a custom recovery installed, CWM or TWRP? Have you tried using a different computer and different cable?
Maybe try flashing the AT&T modem and them a correct ROM and see if that helps. Honestly, I'm not sure how to help you beyond that.
Good luck...
Back up and running
RojasTKD said:
You should only flash ROMs from the "AT&T Galaxy Note II Android Development" section. I think Revolution HD is not an AT&T ROM, I don't know about the other ROMs you flashed (as you didn't say what they where). Those ROMs probably flash a non AT&T compatible radio on you phone. You should read and re-read and make sure you know what to do and what ROM can can flash before you start flashing.
Do you have a custom recovery installed, CWM or TWRP? Have you tried using a different computer and different cable?
Maybe try flashing the AT&T modem and them a correct ROM and see if that helps. Honestly, I'm not sure how to help you beyond that.
Good luck...
Click to expand...
Click to collapse
I was able to get into the cwm recovery and load a new ROM onto the external SD card, then install it. I went with the Jedi ROM this time and it worked. I think you are correct that I was using ROMs for the wrong version of the phone. Everything is up and running and I have full functionality. Thanks for the tip!
cdt710 said:
I was able to get into the cwm recovery and load a new ROM onto the external SD card, then install it. I went with the Jedi ROM this time and it worked. I think you are correct that I was using ROMs for the wrong version of the phone. Everything is up and running and I have full functionality. Thanks for the tip!
Click to expand...
Click to collapse
Excellent, glad you were able to get it working.
Enjoy!
cdt710 said:
I was able to get into the cwm recovery and load a new ROM onto the external SD card, then install it. I went with the Jedi ROM this time and it worked. I think you are correct that I was using ROMs for the wrong version of the phone. Everything is up and running and I have full functionality. Thanks for the tip!
Click to expand...
Click to collapse
get yourself a jig dude, if you were really stuck you could have just put that badboy in and it would take you to dl mode, from there you could have odin'd yourself anywhere you wanted to. A thought for next time you get yourself into a situation you think isn't recoverable.
if you are a in a bloop you can usually get to recovery and from there sort yourself out. I know you are ok now, but this may still help someone else.
A jig is like a condom... protection even if you think you don't need it, you should prolly use it.
Hello all. Let me first thank you for your time in reading my post. I appreciate it. I'm not a fan of only posting for help but I suppose that the site suggesting to always search first is to thank for that because I am usually able to find answers. So please forgive me if this is posted elsewhere but I really have searched and asked around but haven't seen anything similar to my issue. If there is something like it I do not know what to call it. I at first thought it was a sudden death, but realized I think my device model & the symptoms have disproved this theory.
My story...
I bought my AT&T Galaxy S3 feb 2013. I have had it, spent a month or two stock everything. The past month & a half I have flashed CM 10.1 & most recently PK-2.32 for about 3 weeks. Have ran it and loved it with no issues. Used the kernel that comes with both ROMs.
4 days ago
I was charging my phone at work, picked it up after a while, and it wouldn't turn on. It was stuck in a loop of 2 of the screens in my attachments(the battery screen & the SGS3 logo). The battery screen is not in motion, it is stationary like that so that the circle doesn't move.
I have tested quite a few things in regard to what I thought might be the issue...other batteries, chargers, cables pull sim & SD and still no luck...etc.
While the phone is unplugged I get no indication of life. Only when I plug it in will it show me the battery symbol & the logo.
After some playing with it while it is plugged in I have been able to get it into download mode quite frequently with no issue as seen in the third attachment.
So yes I can get into download mode but I'm still "fairly new" and not sure where to proceed from here. I'm not sure what my options are as this is new to me and I can't find anything related, nor can my much more experience friend who is not so new at it that got me into wanting to load custom ROMs.
And yes, as you can see it has tripped my flash counter up once, from what I've read there's only one way to fix that if I need to send it in.
So...If you are able and willing to help I would greatly appreciate it and any options you might give me. I'm willing to try almost anything as my phone is of no use to me at this moment.
if you can access download mode,one option is to connect the device to your PC and flash the stock firmware via odin. untick the Auto Reboot option. once you get a PASS, pull the battery, replace and immediately hit vol up + home + power button. when the device vibrates, release just the power button. in recovery, wipe data/factory reset, wipe cache. reboot.
first, can you boot into recovery at all?
xBeerdroiDx said:
if you can access download mode,one option is to connect the device to your PC and flash the stock firmware via odin. untick the Auto Reboot option. once you get a PASS, pull the battery, replace and immediately hit vol up + home + power button. when the device vibrates, release just the power button. in recovery, wipe data/factory reset, wipe cache. reboot.
first, can you boot into recovery at all?
Click to expand...
Click to collapse
First of all, thank you for your reply. I will definitely use your suggestion if that turns out to be my best option.
Secondly, it's funny you should ask about recovery. I have tried and tried to get into recovery, I have only been able to boot into it one time while it is on a charger, did not try anything because I thought that if I could get in it once I could get in it again, but since then no I have not...
UNTIL just now when you asked, I tried again and I am in TWRP. It is still in recovery at this moment, again only because I have it plugged in so I am open to your advice.
Well, since you're in recovery, I would consider wiping data/factory reset, wipe cache and dalvik, flash rom again and gapps. Reboot to see if that got you cleared up. This would mean you have to reset up your phone for the most part.
You could also consider wiping cache and dalvik, and flashing the rom and gapps. maybe this would correct your issue without wiping the device data.
Sou your device just did this? You weren't trying to flash a new kernel or anything?
moose0003 said:
First of all, thank you for your reply. I will definitely use your suggestion if that turns out to be my best option.
Secondly, it's funny you should ask about recovery. I have tried and tried to get into recovery, I have only been able to boot into it one time while it is on a charger, did not try anything because I thought that if I could get in it once I could get in it again, but since then no I have not...
UNTIL just now when you asked, I tried again and I am in TWRP. It is still in recovery at this moment, again only because I have it plugged in so I am open to your advice.
Click to expand...
Click to collapse
You have a few options at this point. You can access recovery and download mode so this is good. You can try and flash a new ROM through TWRP. You can also go into download mode and install a stock rom to start over. With TWRP choose a ROM of your choice (as long it is intended for your model). You could just restore a nandroid of one that you know worked...if you made any.
xBeerdroiDx said:
Well, since you're in recovery, I would consider wiping data/factory reset, wipe cache and dalvik, flash rom again and gapps. Reboot to see if that got you cleared up. This would mean you have to reset up your phone for the most part.
You could also consider wiping cache and dalvik, and flashing the rom and gapps. maybe this would correct your issue without wiping the device data.
Sou your device just did this? You weren't trying to flash a new kernel or anything?
Click to expand...
Click to collapse
Thanks again for your reply. I will try this and check back.
You are correct, it just did this, no kernel or anything. I will try wiping the device the data doesn't bother me. I won't lose much.
Have you or anyone else heard of this happening or know a cause? I could not find anything.
aybarrap1 said:
You have a few options at this point. You can access recovery and download mode so this is good. You can try and flash a new ROM through TWRP. You can also go into download mode and install a stock rom to start over. With TWRP choose a ROM of your choice (as long it is intended for your model). You could just restore a nandroid of one that you know worked...if you made any.
Click to expand...
Click to collapse
Thanks for your reply. I have a few backups. I will try stock first and see where that takes me and go from there.
Sorry about the delay. I was in recovery but I could not get it to recognize my SD card. So I took it out to try to load it in the computer and I'm having the worst time getting either of my computers to recognize either SD card I have even with 2 different readers. Still working on it though...
moose0003 said:
Sorry about the delay. I was in recovery but I could not get it to recognize my SD card. So I took it out to try to load it in the computer and I'm having the worst time getting either of my computers to recognize either SD card I have even with 2 different readers. Still working on it though...
Click to expand...
Click to collapse
Ouch sounds like your sd card is corrupted, you may not be able to get any info off it. You may have to use Odin to flash a stock ROM. You can still get to Download right?
metalsnakebite said:
Ouch sounds like your sd card is corrupted, you may not be able to get any info off it. You may have to use Odin to flash a stock ROM. You can still get to Download right?
Click to expand...
Click to collapse
Thanks for commenting. You were correct, my sd card was corrupted. Had my 4gb card that was working so I was able to determine that was the case.
Latest update
I was frustrated at the most recent attempt to load recovery, which I never succeeded in doing. I then decided to load a stock ROM from odin. Started this process, and it was going well until the reboot phase, which is what I was fearing the most.
Once it attempted the reboot, it attempted to reboot, then would just vibrate shortly over and over and over, with nothing on the screen.
Unplugged the device hoping for the best, yet nothing happened upon my attempts to power on.
Plugged back in and would initiate the same sequence in my original post, with the image of the battery, to the image of the SGS3 logo.
So...hoping for any good news someone has to offer, but have come to terms with the worst.
Again, appreciate any comments toward the struggles with my phone.
xBeerdroiDx said:
Well, since you're in recovery, I would consider wiping data/factory reset, wipe cache and dalvik, flash rom again and gapps. Reboot to see if that got you cleared up.......
Click to expand...
Click to collapse
Forgot to mention in my last post...I did the steps above while in recovery then I tried to reboot with nothing happening still. I did this before doing anything in ODIN.
moose0003 said:
Forgot to mention in my last post...I did the steps above while in recovery then I tried to reboot with nothing happening still. I did this before doing anything in ODIN.
Click to expand...
Click to collapse
after flashing stock via odin, you generally have to boot into stock recovery to wipe data/factory reset and wipe cache. reboot.
moose0003 said:
Thanks for commenting. You were correct, my sd card was corrupted. Had my 4gb card that was working so I was able to determine that was the case.
Latest update
I was frustrated at the most recent attempt to load recovery, which I never succeeded in doing. I then decided to load a stock ROM from odin. Started this process, and it was going well until the reboot phase, which is what I was fearing the most.
Once it attempted the reboot, it attempted to reboot, then would just vibrate shortly over and over and over, with nothing on the screen.
Unplugged the device hoping for the best, yet nothing happened upon my attempts to power on.
Plugged back in and would initiate the same sequence in my original post, with the image of the battery, to the image of the SGS3 logo.
So...hoping for any good news someone has to offer, but have come to terms with the worst.
Again, appreciate any comments toward the struggles with my phone.
Click to expand...
Click to collapse
Well usually after a fresh Stock Install using Odin you need to to go into the recovery and wipe data, cache/dalvic cache, factory reset. That should fix your problem.
Lol...beerdroid bro i didnt hit the next page you said what i just did.
metalsnakebite said:
Lol...beerdroid bro i didnt hit the next page you said what i just did.
Click to expand...
Click to collapse
haha. i've done that before. cheers, buddy.
xBeerdroiDx said:
after flashing stock via odin, you generally have to boot into stock recovery to wipe data/factory reset and wipe cache. reboot.
Click to expand...
Click to collapse
metalsnakebite said:
Well usually after a fresh Stock Install using Odin you need to to go into the recovery and wipe data, cache/dalvic cache, factory reset. That should fix your problem.
Lol...beerdroid bro i didnt hit the next page you said what i just did.
Click to expand...
Click to collapse
Thanks for the input guys. I'm having a difficult time to get it to stay into recovery now again. It acts like it wants to go in but it will just reboot. I will keep trying and if I need anymore help I will come back. Thanks so much again.
Back again. So I kept playing and was finally able to get into recovery as you guys suggested. Once I got in it finished the odin process and actually booted up! First time in a week. So ran through setup and then was able to determine that wifi is not working with stock ROM. Not sure if it's the phone or the ROM.
After it booted up and turned on was able actually do most functions, didn't test a lot wanted to see if it would work without being plugged in...this answer was no.
So after much testing I think what determines what will power it on and off is determined by what it is plugged into. I still think it is having hardware issues though because of the lack of powering on, but I am fairly certain that I can start it every time with a certain cable/charging dock.
I think the next thing I might try since I can get it to turn on is to root it again, load TriangleAway from an SD card, fix flash counter, unroot, load stock & see if they will warranty for hardware issues on the battery connection or whatever it is.
Haven't done this yet but will start tonight & have it finished by tomorrow is the plan. If anyone has any better suggestions I would gladly take them.
So this should be my last post unless a question arises for me.
moose0003 said:
.....I think the next thing I might try since I can get it to turn on is to root it again, load TriangleAway from an SD card, fix flash counter, unroot, load stock & see if they will warranty for hardware issues on the battery connection or whatever it is.....
Click to expand...
Click to collapse
This is what I said I was going to try to do. Took it to work and found time to do the above. TriangleAway worked a lot better than I ever thought it would. Flash counter reset, loaded unrooted stock and have a replacement on the way. Went very smoothly.
So doubt I will root & rom again until out of warranty. I appreciate everyone's help with my issue.
XDA is a great place.
Hello.. So today I attempted to flash a new version of TWRP for installing cleanrom and it bricked my phone. I can get into download mode though
So using ODIN i've been trying to install custom recoveries. Everytime it says pass, but I cannot get a recovery to show up. If I hold up, power and home buttons, the Galaxy note 2 will flash (as if its about to load a recovery) but then just goes back to galaxy note 2 screen. I can still make it to download mode, but cannot seem to get anywhere else.
Also, currently there is no rom on my phone.
Please help!
Thanks,
AC
AC2020x said:
Hello.. So today I attempted to flash a new version of TWRP for installing cleanrom and it bricked my phone. I can get into download mode though
So using ODIN i've been trying to install custom recoveries. Everytime it says pass, but I cannot get a recovery to show up. If I hold up, power and home buttons, the Galaxy note 2 will flash (as if its about to load a recovery) but then just goes back to galaxy note 2 screen. I can still make it to download mode, but cannot seem to get anywhere else.
Also, currently there is no rom on my phone.
Please help!
Thanks,
AC
Click to expand...
Click to collapse
Maybe use odin to start over fresh? Is the recovery separate from the kernel in the Note II?
Sent from my Apple IIe
billyjed said:
Maybe use odin to start over fresh? Is the recovery separate from the kernel in the Note II?
Sent from my Apple IIe
Click to expand...
Click to collapse
I think it is separate. The last thing I had was beanstalk with neak kernel. Then I wiped everything (not sure if that affect kernel or not) to prepare for cleanrom.
How do I use odin to start fresh?
Thanks!
AC2020x said:
I think it is separate. The last thing I had was beanstalk with neak kernel. Then I wiped everything (not sure if that affect kernel or not) to prepare for cleanrom.
How do I use odin to start fresh?
Thanks!
Click to expand...
Click to collapse
Install a factory image (probably with root and custom recovery) then proceed to flash whatever from there.
Sent from my Apple IIe
billyjed said:
Install a factory image (probably with root and custom recovery) then proceed to flash whatever from there.
Sent from my Apple IIe
Click to expand...
Click to collapse
Okay thanks,
I will have to try this after work. This may be a stupid question, but if anyone knows a good location where I can find this that would be really helpful.
I can search around for it more later.
Thanks
I bet Google knows.
Sent from my Apple IIe
SamMobile is a great site for firmwares.
After the screen turns on, let go of power and continue to hold up and home. Try it out.
johntortorella said:
SamMobile is a great site for firmwares.
Click to expand...
Click to collapse
mertin said:
After the screen turns on, let go of power and continue to hold up and home. Try it out.
Click to expand...
Click to collapse
Thanks.. I'm downloading from Sam Mobile now on my laptop at work.
And thanks for the tip. I will try this out as soon as I get home. I really hope my phone isn't pertinently bricked!
AC2020x said:
Thanks.. I'm downloading from Sam Mobile now on my laptop at work.
And thanks for the tip. I will try this out as soon as I get home. I really hope my phone isn't pertinently bricked!
Click to expand...
Click to collapse
If you need something to follow, this will help too.
Link
when you're "bricked" that means you can NOT get into download mode, so you are NOT bricked....
wase4711 said:
when you're "bricked" that means you can NOT get into download mode, so you are NOT bricked....
Click to expand...
Click to collapse
Oh sorry, I wasn't sure what the term bricked actually encompassed. I guess I was stuck in bootloop then.
Well, good and bad news. I got out of the bootloop, and finally got twrp installed on my phone. I did a recovery of beanstalk and also a fresh install of cleanrom. While they boot, they both have been going extremely slowly. Also just loading into recovery is taking super long. I don't know why. I am also not getting any signal, I can however connect to wifi. Anyone have any ideas or any thoughts on how to fix this?
Thanks again!
hey
if you can get into download mode try this find your provider and phone model and download the firware the nice thing this has root already installed so then you can just download goo and install twrp easy i always use this
http://forum.xda-developers.com/showthread.php?t=2004650
make sure you read it all so you have no problems all done with odin make sure you double check the check mark boxes well read and you will know what i am talking about
bigtomcat said:
if you can get into download mode try this find your provider and phone model and download the firware the nice thing this has root already installed so then you can just download goo and install twrp easy i always use this
http://forum.xda-developers.com/showthread.php?t=2004650
make sure you read it all so you have no problems all done with odin make sure you double check the check mark boxes well read and you will know what i am talking about
Click to expand...
Click to collapse
Just tried it out and it had the same problem. installed with ODIN no problem, but I still have no signal and it is still running very choppy.
When I go to mobile networks in settings it tells me "Insert SIM card to access network services" I have a sim and have tried reinserting it multiple times. I don't know whats going on. Also, it seems I do not have any internal storage. It says 200mb in storage that are fully used. When I have cleared everything but the rom.
I may attempt to return the phone tomorrow.
hey
AC2020x said:
Just tried it out and it had the same problem. installed with ODIN no problem, but I still have no signal and it is still running very choppy.
When I go to mobile networks in settings it tells me "Insert SIM card to access network services" I have a sim and have tried reinserting it multiple times. I don't know whats going on. Also, it seems I do not have any internal storage. It says 200mb in storage that are fully used. When I have cleared everything but the rom.
I may attempt to return the phone tomorrow.
Click to expand...
Click to collapse
nope a lot of people have that problem you have to remove your sim card and sd card and flash again then reboot i have seen people do this 3 times to clear all the bad flashes stuck on there phones make sure to factory reset too after by being off then hold down home power and volume up when you see the words pop up let go of all but volume up get into the system setting there factory all and restart then once you give it about 10 min put you sim card and sd card back and before wipe the sd card it has been know to cause some problems if that all doesn't work then ya maybe there is something else
good luck
I searched but seems like everyone else has a slightly different situation than I do and I don't want to screw my phone up any more.
I picked up a Galaxy S5 and wanted to give my Galaxy S3 to my mom.
(This next process happened almost a month ago, so I forgot many of the useful details, I'm really sorry about that)
I don't remember which ROM I was running, I'm fairly certain it was CM10 that hasn't been updated in almost a year. I ended up rebooting and flashing a stock rom that I had backed up on my computer. I flashed it and I got a weird message. The phone wouldn't boot to the ROM and kept going to the home screen. I tried a different stock ROM that I got online, got the same issue, so I tried another source's stock ROM. I got a weird error, phone shut down, and wouldn't power back up.
It would vibrate once when I held the power button, but it didn't do ANYTHING else. I tried doing the power+volume down trick, vibrated twice, did nothing more than that. I got fed up, took the battery out and the memory card, and let it sit in a drawer.
At this moment the only thing the phone does is a short vibration when I do either the power button or power button + volume down.
Today I decided to try to recover it and saw something about a USB Jig I can buy on eBay that may help.
Is this something that may work or is my phone permanently bricked? If the Jig does work, where should I get the stock ROM for this phone, and if it matters, how do I know which stock ROM to install?
It's an AT&T Galaxy S3 16gb model.
here is a thread for stock ROMs.
do you know your bootloader and baseband version?
http://forum.xda-developers.com/showthread.php?t=2939781
"all i can really do , is stay out of my own way and let the will of heaven be done"
mrrocketdog said:
here is a thread for stock ROMs.
do you know your bootloader and baseband version?
http://forum.xda-developers.com/showthread.php?t=2939781
"all i can really do , is stay out of my own way and let the will of heaven be done"
Click to expand...
Click to collapse
I don't know any of that.
Also what's the difference between MJ2, LK3, LG1, and LEM?
Sounds like you flashed an incorrect ROM and/or bootloader onto your phone.
The bootloader is important because if you have the mjb and newer bootloader, flashing an older bootloader will brick the phone.
audit13 said:
Sounds like you flashed an incorrect ROM and/or bootloader onto your phone.
The bootloader is important because if you have the mjb and newer bootloader, flashing an older bootloader will brick the phone.
Click to expand...
Click to collapse
I can see me flashing the wrong rom, but is the bootloader attached to the rom package?
If the bootloader is ****ed, will the jig work for me or am I out of luck?
Where did you get the last ROM you flashed? Provide a link if you can.
Have a look at the debrick thread as it may be helpful if your phone can't get into download mode. The jig may or may not help but it's good to have one for Samsung phones.
audit13 said:
Where did you get the last ROM you flashed? Provide a link if you can.
Have a look at the debrick thread as it may be helpful if your phone can't get into download mode. The jig may or may not help but it's good to have one for Samsung phones.
Click to expand...
Click to collapse
I honestly have no clue, the only rom I could find in my downloads folder on my computer that I can't identify as a custom rom is "pac_d2lte", and I remember the d2lte part throwing me off even though thats what a few sites said to download.
The Jig worked, btw, I'm at the download screen with the phone plugged into my pc, should my PC be showing it as an external device? Cause it doesn't show it in "My Computer".
Can I just take an SGH-I747 rom off this page and flash it with ODIN?
http://forum.xda-developers.com/showthread.php?p=33570269#post33570269
I would not flash any stock rom until you know the bootloader version on your phone.
Since you can get into download mode, flash philz touch recovery for the d2lte and flash a custom rom such as cm11 onto your phone to at least get it booted so you can confirm the bootloader and baseband.
netchemica said:
Can I just take an SGH-I747 rom off this page and flash it with ODIN?
http://forum.xda-developers.com/showthread.php?p=33570269#post33570269
Click to expand...
Click to collapse
I actually just did just that. It seemed to restore my phone to working condition. It seemed a little buggy during set up, but I don't know if it's because I was running it without a sim card or not. So far it looks like it's running just fine.
In other words, this is what I did (in case someone has the same problem and stumbles across this thread):
Purchased a Samsung Galaxy Jig from Amazon
Downloaded one of the LK3 ROMs from this thread
Downloaded Odin 307
Connected the Jig to my phone to allow it to boot to download mode
Once in download mode I unplugged the Jig and plugged the phone into my PC
I launched Odin and it found my phone right off the bat.
With the settings "Auto Reboot", "F. Reset Time", and "PDA" checked, I clicked on PDA and selected the ROM I just downloaded.
I clicked start, Odin did its magic, and my phone rebooted to the setup screen
audit13 said:
I would not flash any stock rom until you know the bootloader version on your phone.
Since you can get into download mode, flash philz touch recovery for the d2lte and flash a custom rom such as cm11 onto your phone to at least get it booted so you can confirm the bootloader and baseband.
Click to expand...
Click to collapse
I didn't see your post before I flashed. I took a gamble and it seems to have worked.
Went to go flash a custom rom.......wiped out phone by accident without backing up custom rom ended up not being able to install...phone now stuck on htc powered by android screen...can't do anything. I'm praying to god someone can help me and FAST
itz_stitch said:
Went to go flash a custom rom.......wiped out phone by accident without backing up custom rom ended up not being able to install...phone now stuck on htc powered by android screen...can't do anything. I'm praying to god someone can help me and FAST
Click to expand...
Click to collapse
Hold down Volume Up and Power until the phone shuts off. Then you can just boot into recovery and attempt flashing again, or a new ROM, or a backup, or even flash a RUU.
FoxyDrew said:
Hold down Volume Up and Power until the phone shuts off. Then you can just boot into recovery and attempt flashing again, or a new ROM, or a backup, or even flash a RUU.
Click to expand...
Click to collapse
I have no backup how can I flash a new rom without putting it on my sd card.....and do u have a rom I can use. I just need to get my phone phone up and running again. I have the dual sim htc desire 816
FoxyDrew said:
Hold down Volume Up and Power until the phone shuts off. Then you can just boot into recovery and attempt flashing again, or a new ROM, or a backup, or even flash a RUU.
Click to expand...
Click to collapse
I finally got a place where I'm not in panic mode but now I have the cm12 rom and I dont like it at all...absolutely no apps....nothing I would like to get back to stock if thats possible. The only one I found won't even copy on to my sd card guess its to big. Hope I can get this fixed by monday cause I have to go out of town. Your help will be greatly appreciated
itz_stitch said:
I finally got a place where I'm not in panic mode but now I have the cm12 rom and I dont like it at all...absolutely no apps....nothing I would like to get back to stock if thats possible. The only one I found won't even copy on to my sd card guess its to big. Hope I can get this fixed by monday cause I have to go out of town. Your help will be greatly appreciated
Click to expand...
Click to collapse
If you are booted up to CM12 download a new ROM, you can download a stock backup for your variant in the Q&A section, and like I said you can always do a RUU.