Related
Dear forum members,
Update on 21/9/2011
>> For the fastest and most reliable way to update hTC devices to Mango 7720 RTM see also my new threads:
>> [NEWS]Custom ROMs and xap 2 Update 2 Mango 7720 RTM for hTC 7 Phones by ansar
>> [XAP]Update to Mango 7720 RTM with any Stock and Custom ROM provided by ansar
Update on 30/7/2011
1. Guide updated to include both hTC and Samsung devices [Omnia 7 is used as a reference name]
2. Guide updated due to MS Release of ISV Beta 7403 and 7712 for MangoB2
3. All required files are included in the following 2 zip files:
3.1 NoDo_Public_by_ansar
3.2 MangoB2_Public_Trial_by_ansar
4. Backup is working in MangoB2
5. Required Windows Phone 7 Backup V1.2 and V1.4 are not included in above (3) zip files
6. An important note [NB] is added in my post #268, read it carefully
7. Users already updated and unlocked to MangoB2 7661 can proceed directly to ISV Beta 7712 update via zune and stay unlocked
If you do not have already update to OS 7392 [NoDo], you must 1st update using this Guide:
NoDo Update Guide: How To Pass ChevronWP7 from OS 7004 to OS February 2011 update and 7392 NoDo
that can be found in section [A.] bellow
If you already have update to OS 7392 [NoDo] using Guide [A.] then you can update to MangoB2 OS using the following Guide:
B. MangoB2 Update Guide: How To Pass ChevronWP7 from OS 7392 [NoDo] to OS 7403 and 7712
MangoB2 Prerequisites:
1. Download in your Laptop this file: Mangob2_Public_Trial_by_ansar.zip
2. Extract Mangob2_Public_Trial_by_ansar.zip using unzip /7zip to a folder and in your Laptop will have the following:
- folders
-- x64
-- x86
- files
-- msvcr90.dll
-- Setup-UpdateWP-x64.exe
-- Setup-UpdateWP-x86.exe
-- StartZuneLocal.exe
-- Unlock_Mango_XBMODDeployer.xap
-- Unlock_Mango.xml
-- Update_Mango_XBMODDeployer.xap
-- Update_Mango.xml
-- Wp7UsbStorageEnabler.exe
- On Laptop:
3. Install zune update by double clicking on StartZuneLocal.exe
-- Follow the on screen instructions, wait for update to complete and exit zune update
4. Run Application Deployment, click on browse
--- for hTC phones, click on TouchXplorer.xap
--- for Omnia 7, click on WP7RootTools 0.5 alpha.xap
-- and click on open
- On windows phone:
-- verify that is not in screen locked or in sleep mode
- On Laptop:
-- in Application Deployment click on Deploy and
-- wait for Status is XAP deployment complete
5. Take a backup of 7392 [NoDo] unlocked device
5.1 Double click on WPSupportTool-x86.msi / WPSupportTool-amd64.msi and then click on uninstall
5.2 Double click on Setup-UpdateWP-x86.exe / Setup-UpdateWP-x64.exe and then click on install
5.3 Download Windows Phone 7 BackupV1.4
5.4 Create backup
End of MangoB2 Prerequisites
Start of MangoB2 1st phase
For hTC devices:
- On Laptop:
-- in Application Deployment, click on browse, click on Update_Mango_XBMODDeployer.xap and click on open
- On windows phone:
-- verify that is not in screen locked or in sleep mode
- On Laptop:
-- in Application Deployment click on Deploy and
-- wait for Status is XAP deployment complete
- On windows phone:
-- tap on top right arrow
-- find and tap on XBMOD.Files.Deployer
-- tap on bottom left arrow to exit XBMOD.Files.Deployer
-- tap and hold on XBMOD.Files.Deployer, tap on uninstall and then tap on yes
-- tap on TouchXplorer
-- in My Device screen double tap on My Documents
-- in My Documents screen double tap on My Ringtones
-- in My Ringtones tap on CustClear.provxml
-- in My Ringtones tap on bottom right ...
-- in ... screen tap on copy
-- in My Ringtones tap on bottom left arrow to return in My Documents
-- in My documents tap on bottom left arrow to return in My Device
-- in My Device screen find and double tap on Windows and wait to appear
-- in Windows screen tap on bottom right ...
-- in ... screen tap on paste
-- tap on bottom left arrow to exit Windows
-- tap on bottom left arrow to exit TouchXplorer
-- find and tap on Connection Setup
-- in SETTINGS screen of Connection Setup tap on tick (circled v)
-- wait for done to appear and tap on to exit Connection Setup
For Samsung devices:
- On Laptop:
-- disconnect Omnia 7 from usb cable
-- run zune
-- connect Omnia 7 usb cable to Laptop and wait for sync to complete
-- double, click on Wp7UsbStorageEnabler.exe and click on Enable
-- close zune
-- browse in folder of Update_Mango.xml right click on it and select copy
-- in windows explorer click on SAMSUNG OMNIA device and click on Storage folder in right window pane
-- right click on Storage and select paste
-- in Wp7UsbStorageEnabler click on Disable and then click on Quit
- On windows phone:
-- verify that is not in screen locked or in sleep mode
-- tap on top right arrow
-- find and tap on WP7RootTools
-- scroll up welcome screen and tap on continue
-- tap on circled + and create provxml folder
-- scroll registry screen left and tap on My Documents
-- in My Documents screen tap on Zune
-- in Zune screen tap on Content
-- in Content screen tap on 0400 folder
-- in 0400 screen tap on 00 folder
-- in 00 screen tap and hold on 0x.z file and tap on cut
-- tap on bottom left arrow until Explorer screen appears
-- tap on provxml folder to open it
-- tap on middle paste button
-- tap and hold on 06.z file, tap on rename and set as Update_Mango.xml and tap on save
-- tap on bottom left button up to exit WP7RootTools
-- tap on Phone app and from keyboard enter ##634# to run Diagnosis app
-- from Diagnosis app keyboard enter *#9908# to run GPRS Manager
-- in GPRS Manager tap on Select GPRS bar to enter relevant file list
-- tap on Update_Mango and then on save
-- after loading ... massage is displayed tap on close to exit GPRS Manager
-- tap on bottom left arrow to exit Diagnosis app
-- tap on bottom left arrow up to exit Phone app
For all devices:
- On Laptop:
-- click on zune View Sync Options
-- click on zune Update option
-- wait for zune An update is available screen to appear and click on UPDATE
-- wait for zune update your phone black screen to appear with available 7403 update
-- in zune update your phone black screen click on UPDATENOW
-- wait for zune update in progress 9 steps to complete
-- when zune new update available screen appears click on CLOSE
- On windows phone:
-- enter SIM pin when prompted
-- in An update is available screen tap on close
-- tap on right top arrow
-- find and tap on Settings
-- find and tap on about and then on more info to verify the OS 7403 update
-- tap on bottom left arrow to exit about
-- tap on bottom left arrow to exit SETTINGS screen
-- tap on TouchXplorer or Advanced Config to verify that is working
-- tap on bottom left arrow to exit TouchXplorere or Advanced Config
End of MangoB2 1st phase
It is recommended to take a backup of MangoB2 1st phase for future use
Start of MangoB2 2nd phase
For hTC devices:
- On Laptop:
-- in Application Deployment, click on browse, click on Unlock_Mango_XBMODDeployer.xap and click on open
- On windows phone:
-- verify that is not in screen locked or in sleep mode
- On Laptop:
-- in Application Deployment click on Deploy
-- wait for Status is XAP deployment complete
-- click on x button to exit Application Deployment
- On windows phone:
-- tap on top right arrow
-- find and tap on XBMOD.Files.Deployer
-- tap on bottom left arrow to exit XBMOD.Files.Deployer
-- tap and hold on XBMOD.Files.Deployer, tap on uninstall and tap on yes
-- tap on TouchXplorer
-- in My Device double tap on My Documents
-- in My Documents double tap on My Ringtones
-- in My Ringtones tap on CustClear.provxml
-- in My Ringtones tap on bottom right ...
-- in ... screen find and tap on copy
-- in My Ringtones tap on bottom left arrow to return in My Documents
-- in My Documents tap on bottom left arrow to return in My Device
-- in My Device find and double tap on Windows and wait to appear
-- in Windows tap on bottom right ...
-- in ... screen find and tap on paste and then tap on ok
-- in Windows tap on bottom left to exit Windows
-- tap on bottom left arrow to exit TouchXplorer
For Samsung devices:
- On Laptop:
-- disconnect Omnia 7 from usb cable
-- run zune
-- connect Omnia 7 usb cable to Laptop and wait to sync to complete
-- double, click on Wp7UsbStorageEnabler.exe and click on Enable
-- close zune
-- browse in folder of Update_Mango.xml right click on it and select copy
-- in windows explorer click on SAMSUNG OMNIA device and click on Storage folder in right window pane
-- right click on Storage and select paste
-- in Wp7UsbStorageEnabler click on Disable and then click on Quit
- On windows phone:
-- verify that is not in screen locked or in sleep mode
-- tap on top right arrow
-- find and tap on WP7 Root Tools
-- scroll Registry screen left and tap on My Documents
-- in My Documents screen tap on Zune
-- in Zune screen tap on Content
-- in Content screen tap on 0400 folder
-- in 0400 screen tap on 00 folder
-- in 00 screen tap and hold on 0x.z file and tap on cut
-- tap on bottom left arrow until Explorer screen appears
-- tap on provxml folder to open it
-- tap on middle paste button
-- tap and hold on 0x.z file, tap on rename and set as Unlock_Mango.xml and tap on save
-- tap on bottom left button up to exit WP7 Root Tools
For all devices:
- On Laptop:
-- click in zune View Sync Options
-- click in zune UPDATE option
-- wait for An update is available screen to appear and click on UPDATE
-- wait for zune update your phone black screen to appear with available 7712 update
-- in zune update your phone black screen click on UPDATENOW
-- wait for zune update in progress 9 steps to complete
-- when zune successful update screen appears click on FINISH
- On windows phone:
-- enter SIM pin when prompted
-- tap on close
-- tap on top right arrow
For hTC devices:
-- find and tap on Connection Setup
-- in SETTINGS screen of Connection Setup tap on tick (circled v)
-- wait for done to appear and tap on it to exit Connection Setup
-- find and tap on Settings
-- find and tap on about and then on more info to verify the OS 7712 update
-- tap on bottom left arrow to exit about
-- tap on bottom left arrow to exit SETTINGS
-- tap on TouchXplorer to verify that is working
-- None version up to AdvancedConfig.1.2.0.0.beta is working
-- RegistryEditor.1.1.0.0 is booting but all 4 options return to initial screen
For Samsung devices:
-- tap on Diagnosis app
-- from Diagnosis app keyboard enter *#9908# to run GPRS Manager
-- in GPRS Manager tap on Select GPRS bar to enter relevant file list
-- tap on Unlock_Mango and then on save
-- after loading ... massage is displayed tap on close to exit GPRS Manager
-- tap on bottom left arrow to exit Diagnosis app
-- tap on bottom left arrow up to exit Phone app
-- tap on Samsung Tools to verify that is working
-- tap on WP7 Root Tools to verify that is not booting
End of MangoB2 2nd phase
It is recommended to take a backup of MangoB2 2nd phase for future use
Congratulations, you have a MangoB2 OS 7712 updated and unlocked windows phone
Till next version enjoy XAPping!!!
Regards, ansar
End of [B.] MangoB2 Update Guide
******************************************************************************************
******************************************************************************************
******************************************************************************************
A. NoDo Update Guide: How To Pass ChevronWP7 from OS 7004 to OS February 2011 update and 7392 NoDo
NoDo Prerequisites:
- a windows phone with an unlocked SIM card is required
- a Laptop with at least Vista Windows OS x86 or x64
- a Wi-Fi router with UPS are preferred due to unexpected external power shutdown
- On Laptop:
-- download this file: NoDo_Public_by_ansar.zip
-- extract NoDo_Public_by_ansar.zip using unzip /7zip to a folder and you will have the following files:
--- AdvancedConfig 1.2.0.0 beta.xap
--- ChevronWP7.cer
--- ChevronWP7.exe
--- dotNetFx40_Full_setup.exe
--- SamsungTools.xap
--- TouchXplorer.xap
--- vm_web.exe
--- Win32OpenSSL_Light-1_0_0c.exe
--- WP7AdsSDK.msi
--- WP7RootTools 0.5 alpha.xap
--- WPSupportTool-amd64.msi
--- WPSupportTool-x86.msi
--- ZuneSetupPkg.exe
-- install, if not already, by clicking on the following:
--- vm_web.exe, optionally for MS Visual Studio 2010 Express
--- Win32OpenSSL_Light-1_0_0c.exe, optionally but requires MS C++ 2008 Redistributables
--- WPSupportTool-x86 for 32k bit OS or WPSupportTool-amd64.msi 64k bit OS
--- dotNetFx40_Full_setup.exe
--- WP7AdsSDK.msi
--- ZuneSetupPkg.exe
--- after above zune installation wait and install when prompted the latest zune version
--- run zune and in settings>software>general, if not, uncheck the Start the zune software...
--- click on x to close zune
--- send ChevronWP7.cer to an e-mail account
--- it is recommended to install Microsoft Visual Studio 2010 Express for Windows Phone
--- in order to do this click on vm_web.exe
--- reset Laptop, enter to Windows OS and connect to internet via Wi-Fi router
- On windows phone:
-- connect windows phone to Laptop with a usb cable
-- download and install Windows Phone 7 Backup V1.2
-- take a backup of current ROM
-- if current ROM is an 7004 may neglect the following steps
-- if the following steps are neglected then perform a hard reset
-- flash windows phone with a 7004 branded ROM
-- advanced users can experiment in this case a flash with a different SPL, branded or unbranded, non NoDo or NoDo
-- unexpected results as reset or screen flood can appear with newer non NoDo and NoDo SPL
-- alternatively you can flash an unbranded 7004 ROM
-- advanced users can experiment in this case a flash with a different SPL, branded or unbranded, non NoDo or NoDo
-- unexpected results as reset or screen flood can appear with newer non NoDo and NoDo SPL
End of NoDo Prerequisites
Start of NoDo 1st phase:
- On windows phone after hard reset or ROM flashing:
-- tap on get started
-- tap on desired language and tap on next
-- enter SIM pin and tap on enter
-- on windows phone terms of use tap on accept
-- on windows phone settings tap on custom
-- on custom windows phone settings tap on Allow cellular data usage ... to uncheck and tap on next
-- tap on desired time zone and tap on next
-- Setup correct date and time and tap on next
-- On Sign in with a windows live ID tap on not now
-- let install apps, if any, and tap on done
-- Connect windows phone to internet via Wi-Fi router
-- tap on bottom left arrow to return to main screen
-- tap on Email setup tile and then tap on other account
-- remember that e-mail account must be that of sent ChevronWP7.cer
-- tap on Email address and enter Email address
-- tap on password and enter password
-- tap on sign in and wait for your name to appear
-- tap on your name and enter a name
-- tap on sign in and wait for e-mail account to sync
-- on e-mail account find and tap on ChevronWP7.cer e-mail
-- tap on ChevronWP7.cer attachment and wait for downloading to complete (ChevronWP7.cer will be shielded)
-- tap on shielded ChevronWP7.cer, tap on install and tap on ok as prompted
-- press and hold windows phone Power on/off button until power off
-- wait for power on, enter SIM pin and tap on enter
- On Laptop:
-- run zune and wait for start black screen to appear
-- click on next for start step to complete and on next again for phone name step to complete
-- wait for zune update your phone screen to appear
- On windows phone:
-- verify that is in not in screen locked or in sleep mode
- On Laptop:
-- run ChevronWP7.exe, check both boxes and click on unlock
-- click on relock and unlock as a test, stay unlock and click on x to close ChevronWP7.exe
-- run Application Deployment, click on browse:
--- for hTC phones, click onAdvancedConfig.1.2.0.0.beta.xap
--- for Omnia 7, click on SamsungTools.xap
-- and click on open
- On windows phone:
-- verify that is not in screen locked or in sleep mode
- On Laptop:
-- in Application Deployment click on Deploy
-- when Status is XAP deployment complete, click on x to close Application Deployment
-- in zune click on update later and then click on x to close it
- On windows phone:
-- tap on close to An update is available message
-- tap on top right arrow
-- for hTC phones, tap on Advanced Config
--- in Advanced Config scroll screen right to enter Tweaks
--- in Tweaks tap twice to tick both allow and prevent
-- for Omnia 7, tap on SamsungTools
--- in dev. options screen tap to tick both Remove Sideload limit and Prevent Device Relocking
-- Press and hold Power on/off button until power off
-- Wait for power on, enter SIM pin and tap on enter
- On Laptop:
-- run zune
-- wait for zune update your phone black screen to appear with available February 2011 update
-- click on UPDATE NOW
-- wait for zune update in progress 9 steps to complete
-- when zune successful update screen appears click on finish
-- in zune click on x to close it
- On windows phone:
-- enter SIM pin when prompted
-- tap on top right arrow
-- for hTC phones, tap on the 1st app // is Advanced Config, bug: name not shown //
--- in Advanced Config slide screen right to enter Tweaks
--- in Tweaks you will see that both allow and prevent are ticked
-- for Omnia 7, tap on SamsungTools
--- in dev. options screen you will see that Remove Sideload limit is ticked
-- tap on bottom arrow to enter programs
-- find and tap on settings
-- find and tap on about and then on more info
-- HW and SW versions can be recorded if required
End of NoDo 1st phase
It is recommended to take a backup of NoDo 1st phase for future use
Start of NoDo 2nd phase
- On Laptop:
-- run zune and wait for start black screen to appear
-- click on next for start step to complete and on next again for phone name step to complete
-- wait for zune update your phone black screen to appear with available 7.0.7392.0 update
-- click on UPDATE NOW
-- wait for zune update in progress 10 steps to complete
-- when zune successful update screen appears click on FINISH
-- in zune click on x to close it
- On windows phone:
-- enter SIM pin when prompted
-- tap on top right arrow
-- for hTC phones, tap on 1st app // is Advanced Config, bug: name not shown //
--- in Advanced Config slide screen right to enter Tweaks
--- in Tweaks you will see that both allow and prevent are ticked
-- for Omnia 7, tap on SamsungTools
--- in dev. options screen you will see that Remove Sideload limit is ticked
-- tap on bottom arrow to enter programs
-- tap on settings and scroll down
-- tap on about and then on more info
-- HW and SW versions can be recorded if required
-- MAC address and SIM ID are now displayed
End of NoDo 2nd phase
It is recommended to take a backup of NoDo 2nd phase for future use
Congratulations, you have a NoDo OS 7392 updated and unlocked windows phone
Till next version enjoy XAPping!!!
Regards, ansar
End of [A.] NoDo Update Guide
Is there away to get the hack built in in to a rom like in the hd2 roms...?
Sent from my HD7 T9292 using XDA Windows Phone 7 App
When I got my HTC Mozart, I unlocked it with chevron. The firmware version was 7004 on a t-mobile branded rom.
After that I connected my phone to zune with flight mode on (easiest way to prevent relock) and updated it to 7008, and after that that to 7392.
Everything is working fine, I can deploy whatever I want to my phone, also with chevron I can only "relock", like ansar said.
lathera said:
Is there away to get the hack built in in to a rom like in the hd2 roms...?
Sent from my HD7 T9292 using XDA Windows Phone 7 App
Click to expand...
Click to collapse
Hi,
Eventually not before mango but in any case there is no special need about it
I am working on something else right now and will see
Thnx for commenting!!
Regards, ansar
GB1337 said:
When I got my HTC Mozart, I unlocked it with chevron. The firmware version was 7004 on a t-mobile branded rom.
After that I connected my phone to zune with flight mode on (easiest way to prevent relock) and updated it to 7008, and after that that to 7392.
Everything is working fine, I can deploy whatever I want to my phone, also with chevron I can only "relock", like ansar said.
Click to expand...
Click to collapse
Hi,
I will try on unbranded phones to see if it works
Thnx for commenting!!
Regards, ansar
UNLOCKING
I have been all over these threads trying to get the best and most out os my phone. I have finally got it unlocked. Not if someone can help explain how to keep it unlocked without having to use flight mode? My last attempt lasted the first update but the second update caused it to lock so had to downgrade back to 7004 and start over.
If it has to be done through the registry can someone please explaine the process I downloaded the latest registry editor found on TouchEperience : http://forum.touchxperience.com/viewtopic.php?f=20&t=593
Thanks in advance for all help very appreciated.
So what exactly did you do ansar? Just updating your phone via Zune to "NoDo" and it still was "chevroned"? Which phone did you use?
Maybe you can give us more details. I would also like to update my phone but i dont want to loose the advanced config app
There are several threads that discuss and detail the prevent relock reg edit...
Sent from my Focus using XDA Windows Phone 7 App
Yes There Are...
munkeyphyst said:
There are several threads that discuss and detail the prevent relock reg edit...
Sent from my Focus using XDA Windows Phone 7 App
Click to expand...
Click to collapse
Yes there are but with having an idea of what the end result of doing something wrong noobs like myself (to WP7) need a little spoon feeding when it comes to Registry changing.
I apologize if I am asking for a lot but I have always been one that if I understand something better than someone else I have no problem with breaking it down simpler. And maybe with understanding how to do this will also help me to understand how to do background changing which also only done through the register editor.
Thanks in advance for any and all help.
The details for keeping your phone unlocked are in my sig. Follow instructions from "How To Keep Your Phone Unlocked" part 1 and 2. Once you have set these reg keys the phone will not relock with updates.
Sent from my LG-C900 using XDA Windows Phone 7 App
Striving said:
I have been all over these threads trying to get the best and most out os my phone. I have finally got it unlocked. Not if someone can help explain how to keep it unlocked without having to use flight mode? My last attempt lasted the first update but the second update caused it to lock so had to downgrade back to 7004 and start over.
If it has to be done through the registry can someone please explaine the process I downloaded the latest registry editor found on TouchEperience : http://forum.touchxperience.com/viewtopic.php?f=20&t=593
Thanks in advance for all help very appreciated.
Click to expand...
Click to collapse
Hi,
I did test on 2 devices with branded ROMs and needed some different settings
An update to the thread with a guide will be performed after phone monitoring
Regards, ansar
derausgewanderte said:
The details for keeping your phone unlocked are in my sig. Follow instructions from "How To Keep Your Phone Unlocked" part 1 and 2. Once you have set these reg keys the phone will not relock with updates.
Sent from my LG-C900 using XDA Windows Phone 7 App
Click to expand...
Click to collapse
Thank you and I appreciate you response and help I just have 1 question before I attempt this. My question is will this work on the HTC HD7 which is what I have?
Striving said:
Thank you and I appreciate you response and help I just have 1 question before I attempt this. My question is will this work on the HTC HD7 which is what I have?
Click to expand...
Click to collapse
Hi,
Yes, in HD7 it was most easy and you can try this simple steps:
- Flash a 7004 branded ROM
- Setup e-mail account and send ChevronWP7.cer
- Install ChevronWP7.cer
- Install Application Deployment and optional Visual Studio 2010 express
- Run zune, sync and let pass all steps but not upgrade yet
- Run ChevronWP7.exe and unlock
- Relock and unlock as a test and stay unlock
- Deploy AdvanchedConfig 1.2.0.0 beta, to keep unlock
- Now let zune upgrade
- At the end you will have an 7008
- Run ChevronWP7.exe and check if it is unlock
- If not let me know
- If yes, let zune to upgrade 7392
- At the end you will have a working 7008 backup to return in case of emegency
- Run ChevronWP7.exe and check if it is unlock
Regards, ansar
Nice work ansar. Will this also apply to my HTC Mozart 7, T-Mobile DE, currently chevroned, prevented from re-lock and on 7004? I want to update to Nodo
Two Computers
ansar.ath.gr said:
Hi,
Yes, in HD7 it was most easy and you can try this simple steps:
- Flash a 7004 branded ROM
- Setup e-mail account and send ChevronWP7.cer
- Install ChevronWP7.cer
- Install Application Deployment and optional Visual Studio 2010 express
- Run zune, sync and let pass all steps but not upgrade yet
- Run ChevronWP7.exe and unlock
- Relock and unlock as a test and stay unlock
- Deploy AdvanchedConfig 1.2.0.0 beta, to keep unlock
- Now let zune upgrade
- At the end you will have an 7008
- Run ChevronWP7.exe and check if it is unlock
- If not let me know
- If yes, let zune to upgrade 7392
- At the end you will have a working 7008 backup to return in case of emegency
- Run ChevronWP7.exe and check if it is unlock
Regards, ansar
Click to expand...
Click to collapse
Hi Ansar,
Thanks a whole lot I will do this now I do have one question. After this is done can you connect to another computer I recently got a new laptop (running windows 7) and it is what I have been doing these things with my phone now before I got the laptop I was using my computer (which run XP) last night I connected it to my computer to download my audio and pictures this morning it was back lock and I had it on airplane mode. Will I be limit to only connecting to my laptop or will the permnant unlock continue to keep it unlocked?
Does anyone have a direct link to the AdvanchedConfig 1.2.0.0 beta when I searched here all 3 results bring me back here and when I google it it takes me to TouchXperience site and the I only see versions 3.0; 3.1; 3.2; and 3.3.
Question in continuing to find Advanced Config I came across this:
How to sideload more than 10 apps ?
Unlock your device with a modded ChevronWP7 version:
ChevronWP7_NoSideloadLimit.zip ( 83.27K ) Number of downloads: 26
Credits to xda user hounsell on http://www.red-gsm.net/t48485/
Is this better that the one I've been using?
Thanks in Advance
Striving said:
Hi Ansar,
...Will I be limit to only connecting to my laptop or will the permnant unlock continue to keep it unlocked?
Does anyone have a direct link to the AdvanchedConfig 1.2.0.0 beta when I searched here all 3 results bring me back here and when I google it it takes me to TouchXperience site and the I only see versions 3.0; 3.1; 3.2; and 3.3.
Question in continuing to find Advanced Config I came across this:
How to sideload more than 10 apps ?...
Thanks in Advance
Click to expand...
Click to collapse
Hi,
You cannot use XP, at least Vista to any PC/Laptop
DL it from here: AdvancedConfig_1.2.0.0_beta.xap
This has more than you need to keep unlock, maximum apps etc
Regards, ansar
Visual Studio 2010 express
ansar.ath.gr said:
Hi,
You cannot use XP, at least Vista to any PC/Laptop
DL it from here: AdvancedConfig_1.2.0.0_beta.xap
This has more than you need to keep unlock, maximum apps etc
Regards, ansar
Click to expand...
Click to collapse
Thanks been waiting for your reply before I did anything. downloading now and will follow your instructions. will let you know how things turn out.
Muchly appreciated.
I just noticed you added Visual Studio 2010 express is it included in something i've downloaded already im searching for it but if you have a link i'll take it.
It's been over 2 hours and I don't see it in any thread.
Striving said:
Thanks been waiting for your reply before I did anything. downloading now and will follow your instructions. will let you know how things turn out.
Muchly appreciated.
I just noticed you added Visual Studio 2010 express is it included in something i've downloaded already im searching for it but if you have a link i'll take it.
Click to expand...
Click to collapse
Hi,
Visual Studio is Optional for Developing WP7 apps
At least you should dl WPSupportTool-x86.msi [32bit] or WPSupportTool-amd64.msi [64bit]
All can be dl from http://download.microsoft.com
Regards, ansar
ansar.ath.gr said:
Hi,
Visual Studio is Optional for Developing WP7 apps
At least you should dl WPSupportTool-x86.msi [32bit] or WPSupportTool-amd64.msi [64bit]
All can be dl from http://download.microsoft.com
Regards, ansar
Click to expand...
Click to collapse
Are these apps/programs for the phone itself or for the computer? I put WPSupportTool-amd64.msi [64bit] in the search and got: Results for:"WPSupportTool-amd64.msi"
Sorry, no results were found. It may help to:
Okay I realized I wasn't searching Microsoft when I did choose it I still got the same results then google open up leading me to http://forum.xda-developers.com/showthread.php?t=1021920 where the Windows Phone Support Tools can be downloaded. Now to find the Visual Studio. Which I am still a little confused because I thought your instructions these were things to install on the phone and if that is the case then what I'm doing is wrong and therefore I can't find the right things .
Okay I found it but again I am still confused becase you said: "Install Application Deployment and optional Visual Studio 2010 express" but what I have to my knowledge is not a XAP app.
hello ansar..
i have an HD7 branded for o2 and i unlock it on 7004 and prevent it from locking
now i have it on the last update and i can deploy any xap =)
so can i help you?!
This works and is easy.
1. Go to shipping-roms.com and download your applicable Rom, for your phone, from your service provider. Click on Android, scroll to bottom of list and click on "Vision", then scroll to the file called "RUU_Vision_BellMobility_WWE_1.34.666.1_Radio_12.28b.60.140e_26.03.02.18_M2_release_154437_signed.exe". This is the one you want!
2. Make sure you have HTC Sync installed on your Windows based laptop, this is what provides the driver for your usb to connect to your phone.
3. Make sure "USB Debugging" is set on your phone. It can be found by going to: Applications/Development, then check it off at the top.
4. Power Down Phone, or choose "restart" from your "rooted" phone and select "BootLoader" in the option list that comes up.
5. (If you chose bootloader from list as mentioned above, skip this step) With your phone powered down, hold the power button and "up" volume switch simultaneously to get to bootloader menu. This could take a few tries to get right. Keep trying, you'll get it. Hopefully though, you'll have the option in the "restart" menu of your rooted phone.
6. With "usb debugging" on and your phone in "bootloader" mode, it is time to fire up the executable file your downloaded in step 1. After it installs, you will get a grey screen program that shows your phone. Check the box and select next, on the next screen, check the box again and select next. Wait for the rewrite of the original ROM to your phone. You'll know it's working as your phone will display the HTC logo with a green progress bar.
Note: While the original ROM is being installed, your phone may power down a couple of times. No worries, it is expected behaviour. When the program is done, it will tell you it is finished, and your phone will reboot to it's fresh from Bell state.
Hope this helps. Wish these instructions were here when I had to do it. Lol!
Enjoy the Day!
If anyone is having luck with this, and this post was helpful, I could use the "Thank Yous". This allows me to post the direct links to the items you"ll need for unroots.
Actually i was getting ERR 155 but, it was because i was not on bootloader... thanks for the clear and easy to follow steps.
Now i got it working with stock Froyo!!
I have a big problem on my HTC Droid Incredible.
Bypassing the activation screen really irritates me and i can't turn on the USB Debugging which is the key to root and s-off my phone and to bypass the activation screen.
The procedure i did for bypassing the activation screen are: tap 4 corners, safe mode, call *228 and end call after few seconds (did this several times), cdma workshop, ##778 change the nam setting, and non of them works for me.
cmlusco member of xda told me that the best way to bypass it is to change the build.prop in any rom i'm going to flash on my phone. Then he give me this link http://forum.xda-developers.com/showthread.php?t=1306400 and i think this is it, but in the end still failed because i need to turn on my USB Debugging.
Please help me to bypass my Droid Incredible.
I'm here in Philippines and there is no Verizon network provider here.
I already solve this problem and I can use my Droid Incredible. Sweet!!!View the 3rd post how did i do that.
Click to expand...
Click to collapse
are you able to fix this?im having EXACTLY the same problem.
yup I already fix it, just follow this procedure.
1) try to enable usb debugging mode by doing this procedures.
for this,you should need wi-fi.
so,let's start
1)when the phone calls to *228 tap contacts icon,right to the "end call"
2)try to add a new contact and enter facebook or other socialnet dialog.
phone asks you to enable wifi, do this and connect your wifi network
3)next hold the search button and (via voice search) search in google "market"
4)tap to the official market page, phone asks you about opening this page,choose market app.login in the google accounts,if you need.
5)search in market "usb debug" app. install it and tap "open' in the market app
6)enable usb debugging and enjoy)
and for those who don't have a wifi connection in there home, this procedure is for you.
1. call *228 and tap the contact on the right side of end call.
2. add contact and put any information.
3. try to connect it in facebook to prompt the setting window.
4. tap setting.
5. tap search softkey and type application.
6. finally you can enable usb debugging without any problem.
thanks to ramazancik94 for giving this life saver step for enabling usb debugging mode.
2) root and s-off your phone by following this procedure root 2.3.4,downgrade,and s-off
3) if you already have CWM, rooted, and s-off your phone try to install some ROM using CWM in development section. Double check if your phone is s-off via hboot (press and hold power button and volume down), your phone is rooted if you install CWM, and find some ROM that suits your need.
4) Try to use the "end call bypass" if this method doesn't work with you this will be your last resort. Delete the phone.apk before you install the rom, to delete the phone.apk open the "blah blah blah rom.zip" and go to data> system app> find phone.apk and please don't extract the rom and delete the phone.apk or i won't work, just delete it from the zip.
Note: Deleting the phone.apk will result for disable your phone signal. So you're going to use your phone for music, game, watch some movies and wifi internet. You won't be able to use it for call, text and mobile data, and also please read it carefully so you won't **** your phone. You've been warned
For more information visit this thread: help bypass the activation
All big thanks to cmlusco, ramazancik94 and tiny4579 for their help
need help
sir maybe you can help me with this...im new to android phones and i dont think i can make it
can you please send me the step by step procedure of the things i need to do after i put my phone in USB debugging mode?hope you dont mind
my email is [email protected]
my tcp account is kian0926, im here in the Philippines as well and im glad that you were able too fix yours, hoping that i can use mine as well, saving this device from a trash can
many thanx in advance...
i can't get my ADB working
after i extracted mini-adb under c drive (c:\mini-adb_inc) i extracted adb inside of it
but icant get adb working
when i tried to open adb it just flashes (like blink of an eye) and closes itself immediately
i cant proceed
pls help..............
Kian0926 said:
i can't get my ADB working
after i extracted mini-adb under c drive (c:\mini-adb_inc) i extracted adb inside of it
but icant get adb working
when i tried to open adb it just flashes (like blink of an eye) and closes itself immediately
i cant proceed
pls help..............
Click to expand...
Click to collapse
You cant just click on the adb.exe file, it is a cmd line program. Open a cmd prompt on your pc and type " cd C:\mini-adb_inc " then type in your adb command, example " adb devices " this should show the serial number of your phone if connected to the pc and adb and drivers are setup correctly.
thnx for the reply
but this " cd C:\mini-adb_inc " seems to be invalid when im trying to enter n the command prompt window
i already tried removing those that i downloaded and download them again but still the same thing...
---------- Post added at 02:19 AM ---------- Previous post was at 02:11 AM ----------
also inside of mini-adb extracted on my c drive theres no adb.exe.it just say's adb
under that is AdbWinApi....so cunfused now
Kian0926 said:
thnx for the reply
but this " cd C:\mini-adb_inc " seems to be invalid when im trying to enter n the command prompt window
i already tried removing those that i downloaded and download them again but still the same thing...
---------- Post added at 02:19 AM ---------- Previous post was at 02:11 AM ----------
also inside of mini-adb extracted on my c drive theres no adb.exe.it just say's adb
under that is AdbWinApi....so cunfused now
Click to expand...
Click to collapse
What makes you think the cd command didnt work, did it give an error? All cd does is change the directory to C:\mini-adb_inc where the adb file is located. It is ok if it says just adb and not adb.exe, your pc is just set to hide extensions. When you first open the cmd prompt to the left of where you type it will say something like C:\users\your_user_name\desktop >, when you type cd C:\mini-adb_inc it should go to the next line, and to the left of where you type now it should say C:\mini-adb_inc >Then type adb devices and see if a serial number comes up.
"C:\users\your_user_name\desktop" his is what i exactly saw on my laptop and when i tried enterring "c:\mini-adb_inc" a message appears say's like "incorrect path/directory"
im gonna try using another PC and hope this time it works..
Kian0926 said:
"C:\users\your_user_name\desktop" his is what i exactly saw on my laptop and when i tried enterring "c:\mini-adb_inc" a message appears say's like "incorrect path/directory"
im gonna try using another PC and hope this time it works..
Click to expand...
Click to collapse
You have to type " cd C:\mini-adb_inc " or what ever the path is to the adb file. here actually try this. Go to the folder where the adb file you unziped is. Then hold ctrl + shift and right click on an empty space in that folder, and select open cmd prompt here. then type in your adb command, ie adb devices.
after i successfully activated,rooted to 2.3.7 with cm7 ROM my droid incredible it was working perfectly fine,but after a couple of hours using my droid it unexpectedly shut itself down and left me with just a blinking orange led at the top of it..last application running is viber,im on a call actually..and my phone is on charge...
what might be the cause of it?and can this be fixed?..my phone is completely dead
i even tried resetting the phone(pressing volume down button and power button but still no reponse..
Kian0926 said:
after i successfully activated,rooted to 2.3.7 with cm7 ROM my droid incredible it was working perfectly fine,but after a couple of hours using my droid it unexpectedly shut itself down and left me with just a blinking orange led at the top of it..last application running is viber,im on a call actually..and my phone is on charge...
what might be the cause of it?and can this be fixed?..my phone is completely dead
i even tried resetting the phone(pressing volume down button and power button but still no reponse..
Click to expand...
Click to collapse
Sorry to say, but if you cant enter hboot, or boot up to the os or recovery, then the phone is more thsn likley bricked. Unless its a battery issue. Does it vibrate at all when trying to start?
Kian0926 said:
after i successfully activated,rooted to 2.3.7 with cm7 ROM my droid incredible it was working perfectly fine,but after a couple of hours using my droid it unexpectedly shut itself down and left me with just a blinking orange led at the top of it..last application running is viber,im on a call actually..and my phone is on charge...
what might be the cause of it?and can this be fixed?..my phone is completely dead
i even tried resetting the phone(pressing volume down button and power button but still no reponse..
Click to expand...
Click to collapse
Does it boot when plugged in? There MAY be some help if it can boot when connected to AC power.
Kian0926 said:
after i successfully activated,rooted to 2.3.7 with cm7 ROM my droid incredible it was working perfectly fine,but after a couple of hours using my droid it unexpectedly shut itself down and left me with just a blinking orange led at the top of it..last application running is viber,im on a call actually..and my phone is on charge...
what might be the cause of it?and can this be fixed?..my phone is completely dead
i even tried resetting the phone(pressing volume down button and power button but still no reponse..
Click to expand...
Click to collapse
I've experience this, just a blinking orange led. What did I do was i charge it and a couple of minute the the blinking orange led stops and it become a steady orange led.
Easier way (offline)
Found what could be an easier way, I'm playing with my sister's incredible and I can get usb debugging enabled by using any of the official verizon update packages (could be a rom, but I downloaded the smallest hboot upgrade from htcdev), it appears to send some commands in usb mode that trigger the activation of usb debugging, what's funny if that if you either disconnect before it's done, or it fails, it leaves usb debugging on.
Non-sense.
EDIT: You just have to open the utility, you don't to flash or disconnect.
Such and old thread but I have a Incredible that a friend gives me and I couldn't access the market app by search function. What I did was search anything with voice commands, then a navigator window opens and change the URL to: market://details?id=usb, it opens the market app and I can install the USB debug app
Simple method, without the use of USB Debudding/rooting flashing:
Go to Emergency dialer,
Enter ##778, and press 'call'
Select 'Edit Mode'.
Password is: 000000
Select 'NAM Settings'
Make the following changes:
MDN = your 10 digit phone# (0000000000)*
MIN1 = your 7 digit phone# (0000000)
MIN2 = the area code of your phone# (000)
Press the 'back' key and go to 'HOME SID/Home NID' settings
Select 'Home SID/NID #1', and change the first value to '189' (Leave the 65535 alone).
Now press your 'menu' key
Press 'commit modifications' "button"
Phone Should reboot now.
Changing MDN using cdmaDevTerm
In some phones MDN cannot be changed, in this case you need to connect the phone to the computer as a "modem" device, and use the opensource cdmaworkshoptool / cdmaDevTerm from here:
http://code.google.com/p/cdmaworkshoptool/
Connect the tool, select manually / automatically the COMPORT for your HTC device, Read from device, Change the MDN to 0000000000 Select write
Disconnect and reboot your device.
It should now by pass the activation.
most of the ref. from
http://androidforums.com/incredible...g-activation-screen-no-service-available.html
This guide is similar to my Moto G5 Plus guide, but is a bit more complicated due to not having a signed image with the correct EFS items.
WARNING: These tools can easily brick your phone, use this entirely at your own risk. Only advanced users should attempt this.
Requirements
Moto E4 Qualcomm version (tested on Verizon XT1767, but should work on all)
QXDM software (specifically, EFS Explorer) and basic knowledge of how to use it
Steps
Ensure you have a working QXDM setup, you can follow this tutorial step 1, then from step 4 until step 9 only
Insert Freedom SIM, boot up phone and ensure it can connect properly
Shut down phone. Hold the volume up and down buttons at the same time while pressing power
Press volume down button until you get to the "BP TOOLS" item, tap the power button once on it
After the phone boots up, start up EFS Explorer from the QXDM suite, connect to the phone (it will show up as "MSM8917" under QPST Configuration). You can do this by selecting the phone from the QPST Configuration screen and going to the "Start Clients" menu item and choosing "EFS Explorer." Choose the same port on the next screen, leaving SPC code as is, and press OK. Refer to the linked tutorial above.
Navigate to nv -> item_files -> wcdma -> rrc. In this folder, right click in the file list on the right hand side, select "Copy Item File from PC" and select each of the files in the attached zip (wcdma_rrc_fast_return_to_lte_after_csfb_timer, wcdma_rrc_fast_return_to_lte_after_csfb, and rrc_b66_plmn_support) and press ok (do this one by one). Ensure "Overwrite Allowed" is selected.
Go to the phone menu -> reset phone. Then reboot your phone.
Proof
Note: If you remove the SIM card you may have to do this over again.
I have implemented this fix and it works great.
Just some tips to save others some time.
1. You do not need USB debugging/Developer options on or the Motorola USB drivers installed.
2. The archive in the linked QXDM/QPST tutorial is no longer available but someone reposted in the last few pages of that thread.
https://forum.xda-developers.com/showpost.php?p=73160851&postcount=1187
3. If using Windows 10 you must boot your phone into BP Tools mode before you connect to the PC. After connecting the phone under Device Manager you must go to View > Show hidden devices to see the Moto E4 appear 4 times under Other devices.
4. You must force install the HTC driver that came with the archive I talked about in step 2. However to do this you must disable signed driver enforcement in Windows 10. Unfortunately I could not disable this with the command line option so you have to do the following:
Click the Start Start menu and select Settings.
Click Update and Security.
Click on Recovery.
Click Restart now under Advanced Startup.
Click Troubleshoot.
Click Advanced options.
Click Startup Settings.
Click on Restart.
On the Startup Settings screen press 7 or F7 to disable driver signature enforcement.
5. Once Windows 10 boots up connect the phone that booted in BP Tools mode. Once you are in the Device Manager > Other devices you will update the driver of the 2nd instance of Moto E4 in the list of 4.
6. After installing the HTC driver you should see the HTC Modem appear under Modems in Device manager. Right click > Properties and get the COM port of the HTC modem to use with QPST.
Hope this helps someone.
Hello guys,
I want to share with you a working mathod to access engineering mode in android 12 oos or cos
Just follow these steps
StratOS_HTC said:
You need to enable Developer Options and USB Debugging in the Phone
Download the Oppo_Free_Unlock_v1.0.zip
Secrecy Auto Unlocker :
Open the dialer app on the phone , dial *#9434#
Open Device Manager (Win+R : devmgmt.msc )and expand the Network Adapters category.
Disable all your ethernet adapters except the wifi adapter .
Click on the action tab, then choose add legacy hardware.
Click next.
Choose install the hardware that I manually select from a list (Advanced) and click next.
Click network adapters, then click next.
Select Microsoft and choose Microsoft KM-TEST Loopback Adapter, then click next.
Click next, then click finish.
In the device manager,browse the Network adapters and double click on Microsoft KM-TEST Loopback Adapter to open its properties.
Go to the Advanced tab and find the Network Address option
Click the blank chackbox and paste 704D7B61ABCD in the text box .
View attachment 5464595
Close the properties window and close Device Manager.
Go to where you extracted the unlock tools. Open Sec5.exe.
Make sure your device is in MTP mode, and then press the Unlock button.
After about a second, a string of numbers and letters should show up in the left pane. A few seconds later, "OK" should start flashing in the right pane. Press "Stop unlocking" and close the window.
View attachment 5464597
Open the dialer app on the phone , dial *#9434#
View attachment 5464599
Then enter *#649010# and to unlock any option You need to enter Confirm code which is 6776 and You are ready to go to backup or restore IMEI and many more …
View attachment 5464613
Hit the thx button if it was helpfull 4 U
Click to expand...
Click to collapse
Credit: StratOS_HTC
Click to expand...
Click to collapse
Original thread since OP couldn't be bothered to give credit...
Secrecy unlock
WARNING - THIS (ORIGINAL) METHOD IS NOT WORKING WARNING - BE CAREFULL REGARDING (your) IMEI SHARING ! You need to enable Developer Options and USB Debugging in the Phone Download the Oppo_Free_Unlock_v1.0.zip Secrecy Auto Unlocker : Open the...
forum.xda-developers.com
This works, however, Rndis,diag switch is missing, meaning you can't use QPST on OOS 12.
full ports activate and pdc works ,efs explorer works
Don't work for me my one question I can connect the internet phone or pc or both