Related
Here's my phone info:
AT&T Tilt 2 6.5 (says world phone when it starts up)
CE OS 5.2.21849
ROM: 1.59.502.3
Radio: 4.48.25.20
480 x 800 resolution
I've tried for several days to hack, install, flash, jailbreak, etc.
*~*NOTHING WORKS*~*
I've researched this sight until wee hours in the morning all this week - nothing helps...
Suggestions...comments...please, at least no bashing me...I waited several days to post this as I have done my research but I'm just too tired of looking and can't figure it out...
All I want to do is freakin' put a new rom on my phone...I like NRGZ28's roms and I've put the stupid Hard SPL Olinix or whatnot on my phone.
But beyond that I've read every manual and text file but it just won't work...
also...
what other rom's are out there that i can try???
You may complain what you want, but when you give us that little info, how do you expect us to help you?
Did you read this page? http://forum.xda-developers.com/showthread.php?t=550540
If you follow these instructions and something didn't work, then tell us where it goes wrong. If you want help, you have to help us.
kimnjace08 said:
Here's my phone info:
AT&T Tilt 2 (says world phone when it starts up)
CE OS 5.2.21849
ROM: 1.59.502.3
Radio: 4.48.25.20
480 x 800 resolution
I've tried for several days to hack, install, flash, jailbreak, etc.
*~*NOTHING WORKS*~*
I've researched this sight until wee hours in the morning all this week - nothing helps...
Suggestions...comments...please, at least no bashing me...I waited several days to post this as I have done my research but I'm just too tired of looking and can't figure it out...
All I want to do is freakin' put a new rom on my phone...I like NRGZ28's roms and I've put the stupid Hard SPL Olinix or whatnot on my phone.
But beyond that I've read every manual and text file but it just won't work...
Click to expand...
Click to collapse
You should post this in the NRG ROM thread, or even better the "Flashing ROM for NOOBs", you will get more support there. Also, list your current ROM. If you have hard SPL then all you need to do is download the NRG ROM, extract it from the 7-zip archive, and put both the files in a folder. Connect your phone via activesync, and then execute the custom RRU exe program. I have flashed several times.
You don't say what errors you are getting - people need as much information as possible.
@ Lennyz1988
thanks but the page you sent me would be one of those text files, explanations, etc that I already read a million times and isn't specific enough for me
one of the main problems is that when documents explain unzipping, unraring, etc, MOST (not always) of the time they never state specifically to where it must be unzipped/unrarred: to the computer desktop? a specific folder in the phone's memory? the sd card?
however, i did hard spl my phone, when i enter bootloader mode it does show the olinix thing on it, so is this the rom number i need to list?? does it have anything to do with rom?
@ stevedebi, isn't the rom number i listed the one that's needed? what other info is needed as i don't think there is anymore info i can get off my phone that i didn't list, but being a noob please explain away so i can get this straight
*~*~*~*~ wait, i think u mean this...it has the 6.5 rom that it came with when i bought it...is that what you're looking for??
kimnjace08 said:
thanks but the page you sent me would be one of those text files, explanations, etc that I already read a million times and isn't specific enough for me
one of the main problems is that when documents explain unzipping, unraring, etc, MOST (not always) of the time they never state specifically to where it must be unzipped/unrarred: to the computer desktop? a specific folder in the phone's memory? the sd card?
however, i did hard spl my phone, when i enter bootloader mode it does show the olinix thing on it, so is this the rom number i need to list?? does it have anything to do with rom?
@ stevedebi, isn't the rom number i listed the one that's needed? what other info is needed as i don't think there is anymore info i can get off my phone that i didn't list, but being a noob please explain away so i can get this straight
*~*~*~*~ wait, i think u mean this...it has the 6.5 rom that it came with when i bought it...is that what you're looking for??
Click to expand...
Click to collapse
With the HARD SPL you now can use custom roms because youre TP2 is not Vendor locked anymore ;-)
But he is not SIM unlocked
ok...
sleurhut said:
With the HARD SPL you now can use custom roms because youre TP2 is not Vendor locked anymore ;-)
But he is not SIM unlocked
Click to expand...
Click to collapse
-------------
no offense...but what does this mean?
For example, I go to NRGZ28's ROM page. I've already hard spl-ed my phone. Check.
Next, I unzip (just 5minutes ago) the 7z file that comes with the customruu.exe and try to set it up on my phone. Fail.
The attachment is what I see every time without fail. No progress beyond this point...help?
THANKS - PROBLEM SOLVED ON THE FLASHING ROM PAGE!!! THANKS A MILLION TO STEVIEWEVIE!!!!
kimnjace08 said:
-------------
no offense...but what does this mean?
For example, I go to NRGZ28's ROM page. I've already hard spl-ed my phone. Check.
Next, I unzip (just 5minutes ago) the 7z file that comes with the customruu.exe and try to set it up on my phone. Fail.
The attachment is what I see every time without fail. No progress beyond this point...help?
THANKS - PROBLEM SOLVED ON THE FLASHING ROM PAGE!!! THANKS A MILLION TO STEVIEWEVIE!!!!
Click to expand...
Click to collapse
Since you took the time to post your problem on THIS forum, please respond with WHAT you actually did to fix your issue. It is kinda not cool to get everyone to help you, then when you solve your issue, just say problem solved and not say what you did. No offense, not bashing you, just let everyone else know what worked to fix your issue.
solution
PROBLEM SOLVED! SOLUTION BELOW:
i guess i never actually extracted the folder like i thought i had already done - PLUS i also moved to a separate folder to keep it apart from ALL other rom's i was trying to flash
I got a file and some apps & drivers.
You can find a PDF file in the attachement.
Please read it to see whether it can help.
Apps & Drivers:
http-//rapidshare.com/files/455584224/KinTwoSetupApp.rar
( - should be replaced with : )
Hi guys, here is another USB driver for KIN TWO which is a little bit different to the one uploaded above.
http-//rapidshare.com/files/456921463/KUSBDrivers.rar
( - should be replaced with : )
Thanks to every one here.
Let's work together/
This looks to be exactly what we are looking for. This will definitely open up the possibilities of modifying the current kin os, or porting a new os to the device. However, this guide is useless without the tools and files mentioned in the document. You said you had some files as well, do you have these files?
SPST Vn.n.n.msi.
PB10ZUnPB20ZU (Lab) Vn.n.n.msi.
SPSTUSBDriverInstall.msi.
InstallPMXMTP.msi
With these files we be able to finally successfully hack this phone.
This is great. We have the resources, now we must figure out how to get a modified os on the phone using the tools.
Awesome find KinPhoneLover; not sure how and where you got this SPST, but it could be the very thing that is needed. For people who bricked their kin phones, they should try the "refurbish feature" to see if that will successfully reset their phones back to "factory mode". As for getting a new OS on the phone, in the pdf at the "Upgrade section", when you browse for the firmware file, it is a .ecn file. Not sure how flashing is done for Cyanogen and those other Android custom firmwares, or their file type extensions. If SPST only supports/allows .ecn files, that could be a problem trying to use those Android custom firmwares.
wow, this is exactly what we needed....did this get leeked or something? it says its from the sharp corp., so im guessing they got it somehow by chatting with them? why isnt there a lot of buzz about this??? i can read my phone number and everything off of this...so close to getting android, or just putting java apps on it..
Too bad its only 32 bit But yes. This is one step closer. Please, people with brick kin, test it out. See if we can get the ball rolling again.
Radar2004 said:
Too bad its only 32 bit But yes. This is one step closer. Please, people with brick kin, test it out. See if we can get the ball rolling again.
Click to expand...
Click to collapse
yes, i have to use my slow home computer, instead of using my quad core 64bit laptop
Just got everything up in running. Is anyone else having a problem with the SPST constantly dropping the connection with the phone and reconnecting? I'm not sure if this is due to running XP in a virtual box or if its something I can readily fix.
Short Answer: doesnt work.
Long Story: This needs your phone to be ON even for refurbish option and then, able to connect to a COM port. Unfortunately, that doesnt happen in SBL / APX mode and phone doesnt boot (autoreboots) so no COM mode available.
Just another software installed (for me).
No news in the front, guys. I guess i just need to get rid of verizon software (the one trying to get an OTA), not something from "normal" kin states.
Okay so now that we have a tool to upgrade the software all we need are custom firmware files to flash to it. However I don't see any option to read/dump the firmware using this software.
dezgrz seems to be correct, there don't seem to be a way to read/dump the current OS to make a backup of it. The PRL and ERI options don't seem to be what we want. The Provision option is the only option where we can read stuff from the phone. Could someone run that option, check all those settings (NAM1, security, feature, data, etc) and write it to a file and upload it? Maybe there will be something useful in there.
I gotta order a new battery, then I'll see if I can get anywhere with this... need to load up a 32bit OS first, apparently.
Either way, this is a huge step. Maybe not complete, but still a huge step. Thanks OP.
Hm..??
This seems interesting. I been watching this site until someone "Exploited" the phone. I have a mac, and does this work for kin? What does it do?
zero2duo said:
Could someone run that option, check all those settings (NAM1, security, feature, data, etc) and write it to a file and upload it? Maybe there will be something useful in there.
Click to expand...
Click to collapse
That features seem to be available already with "QPST" software... which didnt make anything advance (yet).
As i said, i renamed my NAM succesfully, and changed some security options (which i guess that doesnt matter, cause i *was* able to work anyway).
not much you can do that you cant do already, besides looking at your phones info. I was able to change voicemail numbers, was *86, i changed it to to just 8, and it says voicemail, but doesnt connect. Still playing around.
Why don't you just take it back to Verizon and get a replacement. How would they ever know you messed it up trying to hack it?
MicroNateDram said:
Why don't you just take it back to Verizon and get a replacement. How would they ever know you messed it up trying to hack it?
Click to expand...
Click to collapse
You should read the whole threads and/or other threads to understand why.
This phone needs to get hacked. I love my phone but i dont like the OS that the phone has. If this phone isnt hacked by the time summer comes, ill be glad to participate. I've hacked many phones but this may be a challenge. I would like to see apps on this phone.
PS I know the phone has java so where can i go to play games or apps for java?
Kinuser1 said:
PS I know the phone has java so where can i go to play games or apps for java?
Click to expand...
Click to collapse
Javascript
johnkussack said:
Javascript
Click to expand...
Click to collapse
Out of all the things I know, why wouldn't I know that its Javascript? Jeeezus. I would happily spend time on this phone but my grades are more important. Now what site could I go to on my phone to play apps/games.
P.S your post didn't really help me.
Im stupid stuck on the first step and Ive been at it for a week now, I just want to Root, then Ill never need to PC plug the phone again.
The problem is my Evo 4G ONLY connects to the pc to charge. Ive tried fixes, sorry, Ive wasted time on fixes and help posts; I did just successfully install 3.29.651.5IMG.zip from
http://forum.xda-developers.com/showthread.php?t=838448, but that was just been an update.
Anything Terminal Emulator, HBOOT or RECOVERY I can do, thanks for the help, google searching is pulling up all androids, allphone models, all Dates, I keep getting 2009 results.
ALSO, to anyone interested in Metro Flash, the 10 dollar phone flashing service from Metro PCS; in Nevada, found out yesterday, MetroFlash isnt available because the setup or network is/are changing or something. I forgot the specifics, but the rep said that even if I went and did it in CA, it wouldnt work in NV because of that.
Supersonic EVT2-3
Hboot 97
MicroP-041f
Radio 2.15.00.09.01
Build 3.29.651.5 cl252548 release-keys
Hardware v003
PC36IMG
Do you have HTC Sync downloaded to your cpu. IF you don't you need to, so that you will have the drivers that you need to start the process.
I tried versions 2.something and the version on the htc support site, thanks though.
log3an said:
I tried versions 2.something and the version on the htc support site, thanks though.
Click to expand...
Click to collapse
And you are sure you are downloading the correct version. Are you on windows? 32bit? 64bit? Mac? All of that matters so you D/L the correct version otherwise your cpu will not recognize your phone and install the drivers. If its not doing that then it has to be that you aren't having the drivers installed correctly.
I've had a bad USB cable be the culprit of my computer not recognizing my phone. Mine would say "unrecognized USB device" though.
I would try another cable and report back.
Dude i friggin LOVE the help, but the port on the phone is screwed. i actually came back to elaborate on my response; Ive downloaded Most of what I could to ADB if it were working- JDK, Android SDK full, super 1 click, autoroot, unrevoked3, and several RUUs. Initially I followed directions, after nothing working, I experimented. Then I did a faulty usb port search, and all of the suggestions were 'unplug and replug' and such. Its defected.
Spencer my computer isnt responding at all to the USB plug, but thats what posts said, it could be the port or the cord or the pc usb port/hub. its my phone.
log3an said:
Dude i friggin LOVE the help, but the port on the phone is screwed. i actually came back to elaborate on my response; Ive downloaded Most of what I could to ADB if it were working- JDK, Android SDK full, super 1 click, autoroot, unrevoked3, and several RUUs. Initially I followed directions, after nothing working, I experimented. Then I did a faulty usb port search, and all of the suggestions were 'unplug and replug' and such. Its defected.
Click to expand...
Click to collapse
Oooooooh, well you're probably looking for help in the wrong place. You need to take the phone for repair. But I did see a thread on here someone posted about how to root without using a computer, but I didn't actually open it to see what the process was. Maybe that will help you out.
You know what Swaze, Im un and re-installing right now, its HTC Sync SETUP 3.0.551, the other was htc sync2.0.35. Be back after the reboot.
-Went into SERVICES too, Id 'manualed' a few items that I hadnt considered..
I didnt answer either, but I have win7 32 and 64bits installed on this pc, Ive been on the 32bit since the first day.
--And that wasnt it. I was hopeful it was the windows COM thing id disabled.
Try mailing the files to u then use a file explorer to move where u want them. Unless ur using an ruu I don't think u actually need connection.
If I remember right unrevoked has set it up where u can do everything. from your phone using a web site. Maybe I'm wrong.
Sent from my PC36100 using XDA App
Do you have USB Debugging enabled on the phone?
sand thats actually something worth trying, use a root file explorer to copy/paste the flash-image files since I dont have S-Off. Nice, thanks dude.
This will probably sound like the dumbest idea EVER but why can't you just buy a card reader and put the images on the SDCard the old fashioned way? Seems easy enough to me, am I missing something? Also couldn't use just copy the files over using your DropBox? Thats how I do it.
or how about WiFi Explorer? its an app in the market lets you browse and copy files to your SDCard via WiFi.
sand thats actually something worth trying, use a root file explorer to copy/paste the flash-image files since I dont have S-Off. Nice, thanks dude.
Update- Root Manually
Following Sand's suggestion, I began google searches of the manual root processes, supporting information, etc.
Here's where we're at
I began by copying the flash-image to the proper system folders, using Root Explorer, File Expert works too. If you copy files to system/protected folders with an ordinary file manager, the permissions fail.
http://forum.xda-developers.com/archive/index.php/t-918275.html
So, the next step was to learn how to chmod to 775, for those lost READ THIS, its a nice guide on linux permissions and how to set them.
http://forum.xda-developers.com/archive/index.php/t-918275.html
And now Im watching Old Christine, eating a burrito. Ill post more if anyone's interested, if anyone has any tips or shortcuts for me, thatd be awesome.
Update
Just updated another post, and this is what I put
in no particular order,
ADB Over TCP/IP Help
this was the most recent attempt, Android lacks adhoc support though
ADB For Beginners
Commands like 'cp' and 'cat' are used interchangeably it seems, when I find a fuller command list incorporating more, this one will be replaced
Always Up To Date Root Guide
This is a great place for ideas if you're stuck, theyve put all the verified instruct-files on one page. I guess thats what moderators on forum sites do, consolidate information, this was just easy to read without weeding through any unrelated information
Evo 4G Root/Android Root
This was another promising page I came across, but the the 300mb zip failed installation. 'Main Version is Older', all the files in the zip were for like 1.0 and my Evo's radio is 2.15. Changing the Android-info.text in rom .zips to match my devices information was my next idea. Do not do it though, scanning google result lines said it could brick your android.
Visionary, No ADB
This is last because it was a bastard, long story short its not even for the Evo. The jerk.
Updated Again - ADB over Tcp/Ip Works, How to Root?
I was tethering when I found the Adb over wifi so I didnt test it- shouldve though. I connect now cmd tells me, but the 1 step rooters arent working. Before I waste another weeks chasing bad paths, what should I use?
After wasting so much time with your issue, why haven't you used the time to get the phone fixed/replaced?
I had similar issues when I rooted my phone. My phone kept disconnecting while the rooting process was taking place. The issue I found out was my USB cord. I went to the Sprint store and got a new one, then my computer (W7) detected my phone through disk drive.
The new cord worked, using the AutoRoot program found in the rooting section here, and it completed my root.
I hadnt thought of that
SteveGrandRapids said:
After wasting so much time with your issue, why haven't you used the time to get the phone fixed/replaced?
Click to expand...
Click to collapse
SteveGrandRapids, youre a fricken GENIUS. Or an ass; I dont have Sprint. From another of my posts asking the same question:
''Uminchu I wish the problem was the port or plug. Then again if it were, the original owner wouldnt have sold it to me. My friend has had this phone sprint serviced twice, once at best buy when we thought it was the powermat malfunctioning. third time he just got a new phone, now I have this one and metro pcs; an account that Ive had for years now and have flashed two other phones to. ''
Thanks for the pollution.
log3an said:
SteveGrandRapids, youre a fricken GENIUS. Or an ass; I dont have Sprint. From another of my posts asking the same question:
''Uminchu I wish the problem was the port or plug. Then again if it were, the original owner wouldnt have sold it to me. My friend has had this phone sprint serviced twice, once at best buy when we thought it was the powermat malfunctioning. third time he just got a new phone, now I have this one and metro pcs; an account that Ive had for years now and have flashed two other phones to. ''
Thanks for the pollution.
Click to expand...
Click to collapse
wow ever think flashing to another company might be doin something? my phone was a pita to root im a total noob ran unrevoked stopped pulled the bat. red triangle restarted unrev picked up quit third time it restarted the whole process but ran thru and rooted me so i dont know metro pcs..i see their booths but sprints always been good to me
Just got this tablet a couple days ago.
Zeki Tablet TBDG874. It has 4.2.2 Jelly bean. I have been trying to find a way to root it. Have tried several different ways to root(including the update.zip, and crystalroot.zip) and they fail which a expected considering it is a different version of Android OS. Also cant even seem to find a usb driver that works for it either. If i could find a usb driver could dig further in but can't seem to find one anywhere. Called Zeki customer support and they informed me the tablet is very new and they don't have any drivers for it either. Was rather surprised by it, and was also notified they didn't know what rooting was even though i tried to explain it, that was in vain.
Anywho, I am wondering if somebody could send me perhaps there working drivers for usb and maybe they might work on it, or if any other ideas i'm open to try them If you need more info let me know. . If this is in the wrong place, please move accordingly. I have been lingering on here for quite some time but never needed to post before due to great people on here always having a answer for nearly every problem i have had with any android device.
slick97477 said:
Just got this tablet a couple days ago.
Zeki Tablet TBDG874. It has 4.2.2 Jelly bean. I have been trying to find a way to root it. Have tried several different ways to root(including the update.zip, and crystalroot.zip) and they fail which a expected considering it is a different version of Android OS. Also cant even seem to find a usb driver that works for it either. If i could find a usb driver could dig further in but can't seem to find one anywhere. Called Zeki customer support and they informed me the tablet is very new and they don't have any drivers for it either. Was rather surprised by it, and was also notified they didn't know what rooting was even though i tried to explain it, that was in vain.
Anywho, I am wondering if somebody could send me perhaps there working drivers for usb and maybe they might work on it, or if any other ideas i'm open to try them If you need more info let me know. . If this is in the wrong place, please move accordingly. I have been lingering on here for quite some time but never needed to post before due to great people on here always having a answer for nearly every problem i have had with any android device.
Click to expand...
Click to collapse
Well finally found drivers for this tablet. If anyone needs them send me a message and i will try and send it. Cant post things yet or i would put them here. However have not found a way to root it yet. Have tried many tools and methods so far to no avail. If anyone has any ideas i'm willing to try anything. I really dont want to have to send it back but it may be looking like i have to. It keeps locking up and have to reset it alot to make it usable again.
slick97477 said:
Well finally found drivers for this tablet. If anyone needs them send me a message and i will try and send it. Cant post things yet or i would put them here. However have not found a way to root it yet. Have tried many tools and methods so far to no avail. If anyone has any ideas i'm willing to try anything. I really dont want to have to send it back but it may be looking like i have to. It keeps locking up and have to reset it alot to make it usable again.
Click to expand...
Click to collapse
send me your email address,I will send you the stock rom to fix the problem.
tubekeeper said:
send me your email address,I will send you the stock rom to fix the problem.
Click to expand...
Click to collapse
Has any progress been made on your endeavor? Just bought this tablet and looking for a root procedure.
RobBrotherton2 said:
Has any progress been made on your endeavor? Just bought this tablet and looking for a root procedure.
Click to expand...
Click to collapse
Same here my gf just got it for xmas and i wanna root it for her.
tubekeeper says he has but I have nto gotten it yet. Please let me know if anyone gets. Thanks!
mandamelo
ami mandame los drivers mi correo es [email protected] mandamelo porfavor lo necesito
King root was the only way I could root mine, but the tablet went crazy after about 2 months and quit booting.
The only other way I could think of that I didn't try was to push /system/xbin through adb.
Another useful tool was called Uberizer, but it requires full adb access to push superuser.
Lmk how you make out...
Sent from my BLU Studio 5.3ii using XDA Free mobile app
Could you please send me my mail [email protected] update.zip?
If the driver is recommended you use Android tablet Multi Tools v1.02b will serve to remove the screen lock or wipe cache, etc ...
I know this is super old... but...
hey this prob sounds stupid but would the"drivers" you speak of fix my tablet that won't boot fully? it won't factory reset either. I've never tried rooting or anything.. it just stopped booting past where it says "Android" back in like 2012 or something & I just decided to pull it outa the closet and see if I could find a solution. thx!
Hey guys,
I really need to find at least the stock ROM for the new-ish Blu Advance 4.0L (model A010U), because the most recent OTA update unforgivingly bricked mine. Now I want to try to re-flash the stock ROM, but I am also open to custom ROMs, if there are any available. Please help me out! Thanks in advance
I am really surprised no one has replied yet, but again I am facing the same problem and I've been searching the Internet for one month now and I found absolutely nothing for this phone (specifically for version A010U).
So I am going to post a different question in the hopes that someone will read it and help us out:
I have two Blu Advance 4.0 L A010U phones, which are identical except for the color (white and green). They were manufactured a month apart one in 10/2015 and one in 9/2015.
Unfortunately after only a couple of months of light use and for no apparent reason (did not drop it, or wet it, etc) it started going through a boot loop. It will start, show the "bold like us" logo then restart again without making it to the operating system at all. Like I said I've been looking for over a month to find a ROM (stock or modded) to reflash but with no luck. Then I had an idea. Since I have the other identical phone that's working fine, is there a trick I can do using the working phone to create a ROM that I can use in my broken one. By the way, the non working phone will allow me to get into the recovery menu, but unfortunately nothing happens if I wipe the cache or even if I reset to factory defaults.
Anyone knows what's causing that "boot loop", how to fix it and where to find a ROM or even "extract" or "create" one using a working Advance 4.0 L ???
Thank you very much!
Man I wish I knew. I'm kinda a novice. I have the same phone with a similar problem... I downloaded the recent ota update and the first time it said it couldn't unzip it. I tried again and it seemed to work but when it rebooted into recovery it said there was an error... So it won't boot up, it just goes to the screen that says "no command". I'm pretty sure the there's a way to make a copy of the working ROM but since I don't use a PC for anything I've never taken the time to learn the method.
Deuler93 said:
Hey guys,
I really need to find at least the stock ROM for the new-ish Blu Advance 4.0L (model A010U), because the most recent OTA update unforgivingly bricked mine. Now I want to try to re-flash the stock ROM, but I am also open to custom ROMs, if there are any available. Please help me out! Thanks in advance
Click to expand...
Click to collapse
I just got ahold of a couple of these devices myself and am in the process of going through all the in's and out's of them....I'm a Samsung nerd so I haven't messed with something like these in a while but I got one (that was supposedly dead bricked per the lady friend of mine I got them from) at least able to boot into factory mode and recovery via ADB and just as I'm posting this I'm in adb shell going through the device's internal memory.....so we'll see what all I find and can pull out of this one and possibly know enough to post an intelligible reply with solutions next time
The boot looping sounds like a common problem with these and when I get to that point I'm going to get rid of the stock bootanimation.zip ASAP and try something else. I get the idea that these things aren't exactly power houses built for much so the littlest thing or small bug in their coding could lead to this kind of crap happening.
Hopefully you figure yours out before I toss these out the window! lol
Cheers y salud!
---------- Post added at 02:27 AM ---------- Previous post was at 02:20 AM ----------
good.m. said:
Man I wish I knew. I'm kinda a novice. I have the same phone with a similar problem... I downloaded the recent ota update and the first time it said it couldn't unzip it. I tried again and it seemed to work but when it rebooted into recovery it said there was an error... So it won't boot up, it just goes to the screen that says "no command". I'm pretty sure the there's a way to make a copy of the working ROM but since I don't use a PC for anything I've never taken the time to learn the method.
Click to expand...
Click to collapse
Forgot to add a couple things about your post, sorry! I beleive (and I just started digging into this phone) that the no command part is the locked bootloader these phones appear to have. I think it was a combo of holding both volume buttons down from a powered off state then pressing power button on that came up with the option for factory mode or recovery (which led to the sad 'no command' droid), i went into factory mode and theres an option for Tp Upgrade which Im assuming is F/W or something similar but I just hooked up to the PC and in that mode it's reading the internal and external memory of the phone and that's about where I'm at so far.
Wow! I'm surprised this thread is still going.
Anywho, I found a repository that is storing the default ROM for the 4.0L. The files were just added recently. I would have liked to have seen a custom Lollipop ROM made by now, but this device is far too irrelevant to get any attention, unfortunately. Just root and forget, I guess.
I can't wait to try it, thank you! And btw, were you able to get root successfully and if so, how?
Deuler93 said:
Wow! I'm surprised this thread is still going.
Anywho, I found a repository that is storing the default ROM for the 4.0L. The files were just added recently. I would have liked to have seen a custom Lollipop ROM made by now, but this device is far too irrelevant to get any attention, unfortunately. Just root and forget, I guess.
Click to expand...
Click to collapse
Hey Deuler93 -
You have my respect for digging out that BLU ROMs link and sharing with the rest of us. I downloaded the one for my Advance and used SP flash tool to flash the phone that was stuck on a boot-loop. Of course first I had to download and install the MediaTeK drivers for USB connectivity with my PC. Everything worked flawlessly, no glitches what so ever. All these links are easily found and widely available online if anyone is interested I can share here too. I just hope that this boot-loop was due to some software glitch and not hardware failure. Everything seems to work fine for now, keepint my fingers crossed it will NOT happen again.
Well, one less headache to worry about. By the way we're not that far, if you're ever in the Chicago area, I owe you a beer or something. Thank you!
Hi guys !
Thank you very much for the Advance 4.0L Roms.
I have successfuly recovered my phone, but the IMEI got lost.
So, I need to root it in order to recover the IMEI, but I just can´t get success on any method :
Kingroot
Framaroot
Towelroot
is there another way to root it ?
Thank you very much.
I got temporary root using the kingroot apk. But it messed things up and I don't trust it anymore. None of the other mentioned methods worked for me either, maybe try the PC kingroot method
well this helps one thing
good.m. said:
Man I wish I knew. I'm kinda a novice. I have the same phone with a similar problem... I downloaded the recent ota update and the first time it said it couldn't unzip it. I tried again and it seemed to work but when it rebooted into recovery it said there was an error... So it won't boot up, it just goes to the screen that says "no command". I'm pretty sure the there's a way to make a copy of the working ROM but since I don't use a PC for anything I've never taken the time to learn the method.
Click to expand...
Click to collapse
umm. . . when the no command option comes up just press the power button and the rest of options will appear. doesnt exactly solve your problem however unless you have the ZIP file to install, which is what I'm looking for.
What might happen if a ROM is used for another blu phone. ??
A similar phone as well.
Plz advise.
Damn! This thread just keeps going!
I haven't even looked here in a while, so I will bunch my commentary here. I'm also salaried now, so I bought into a OnePlus X (onyx), a more expensive cheapo device, so I do not use the 4.0L anymore.
As for rooting tools, I used the Kingroot APK successfully in the stock environment. I never tried flashing something SuperSU myself, but it could work. Is flashing a SU app possible from the fastboot interface?
And to Steve's question - it is technically possible to flash a ROM for a different device onto your own device, but is considered a bad idea due to the possibility of introducing incompatibilities and missing proprietary requirements. I feel like this would hold especially true to stock ROMs because the manufacturer probably has no interest in supporting anything more than the device that they are manufacturing for. Doing so removes many possible "compatibility" issues from even having to be considered, but I digress. In short, try to find a ROM made for your device and your device only.
Did you find the zip file for the recovery
Marya Wynter said:
umm. . . when the no command option comes up just press the power button and the rest of options will appear. doesnt exactly solve your problem however unless you have the ZIP file to install, which is what I'm looking for.
Click to expand...
Click to collapse
i root my blu advance 4.0l a010u with the kingoroot PC apk, but i got some issues with the lock screen and some apps, so, i need some advice..
i was looking for a zip to use it via recovery but i can't find any..
Recover IMEI
srspinho said:
Hi guys !
Thank you very much for the Advance 4.0L Roms.
I have successfuly recovered my phone, but the IMEI got lost.
So, I need to root it in order to recover the IMEI, but I just can´t get success on any method :
Kingroot
Framaroot
Towelroot
is there another way to root it ?
Thank you very much.
Click to expand...
Click to collapse
You dont need root to recover imei all you have to do is type *#*#84666364#*#* in your dialer and you will be entered in EngineerMode then go into connectivity ,CDS information and radio information phone 1 or 2 then you will see AT+ type something eg.A then backspace and select the first thing you see. Put a space after AT+ and then put you imei code here "IMEI" between these "" You can find your imei by removing your battery it willl be there. After sending command reboot and imei is back.
links are down....check this instead
Hey guys, links here seems to be down .
Maybe this link would be useful for you all... stock firmware can be downloaded and useful help on videos is available too... Enjoy