Develop Bugs

No Connection with official AT&T WM6 Rom

After many flashings of roms, I finally flashed back to the official AT&T WM6 rom located at the link below:
http://forum.xda-developers.com/showthread.php?t=334771
My phone, even with my new sim card doesn't pick up any reception at all. All I get is the two arrows with the "x" and that other weird symbol with the exclamation point next to it.
I have a tilt and when I pop my sim inside, it works perfectly, no hiccups what so ever.
I live here in Hawaii and we just recently turned on the 3G network and I'm not sure if it affects my 8525.
Any ideas on what may be wrong? I had used Black Majiks WM6 on my 8525 previously but this past Monday I had issues with it so I tried flashing a bunch of times and still no fix.
I've searched through the threads for the last 2 days and everything I've tried so far hasn't work and I'm really desperate and need input from more professional users. PLEASE!!!

More information regarding phone problem.
When I try hit the green phone button, it doesn't do anything. Also going to phone settings under the settings menu, and it doesn't go there! Don't know why, I try to click it and nothing. Other icons work, not that one though.
This is getting ever more frustrating and I'm still searching through the thread for possible solutions, but nothing. Someone out there has to have some clue as to what may be wrong!

Found out another thing that might be of importance.
When I reset my device, soft or just turning it off and on, I get a "No GSM" on the AT&T screen.

Man, I've even gone as far as visiting Mr. Vanx's site to downgrade everything back to WM5. I still get the "No GSM" on my startup screen and no connection!
WTF?????????????

Well if you can get to the boot loader try flashing the official rom from HTC's Site for your phone. I'm not saying the one you DLe'd from here was bad but maybe it's just not the right one for your phone for some reason.
http://www.america.htc.com/

Well not to say the ROM you DL'ed from here was bad or anything but if you can get to the bootloader flash the officially released ROM from http://www.america.htc.com/ for your phone and see if that fixes your problem. Maybe the ROM you got from here is just not the right one for your phone or something. Worh a try anyway as you can't really use it as is.

Scrambler001 said:
Well not to say the ROM you DL'ed from here was bad or anything but if you can get to the bootloader flash the officially released ROM from http://www.america.htc.com/ for your phone and see if that fixes your problem. Maybe the ROM you got from here is just not the right one for your phone or something. Worh a try anyway as you can't really use it as is.
Click to expand...
Click to collapse
You know, the weird thing is that I tried to download stuff from the American HTC site, and I can only max out at 10.0kbps and I can NEVER get the whole file, only 15% maybe.
Talk about running into one problem after the other.
Is there a mirror out there somewhere?

Xyberz
Check your PM's

Xyberz said:
You know, the weird thing is that I tried to download stuff from the American HTC site, and I can only max out at 10.0kbps and I can NEVER get the whole file, only 15% maybe.
Talk about running into one problem after the other.
Is there a mirror out there somewhere?
Click to expand...
Click to collapse
I agree, anyone have it I can download? I keep getting lockups on my 8525 with the Schapps build and I want to try the offical build to see if it's the device or the build........but it downloads SOOOO slow......

Just finnninshed uploading RUU_Hermes_CINGULAR_WWE_3.62.502.3_6275_1.54.07.00_108_UOOS_SVN05_Ship.exe the Official ATT/HTC America file to Media Share. Here is the link for you. Hope it helps, let me know.
http://www.mediafire.com/?e0wkzvgm6ym
or
http://www.mediafire.com/?sharekey=ab1a9d4d5155409591b20cc0d07ba4d2067ccab3e6e21d05

Ok thanks for the uploads. Got the file. I just want to make sure if I should upgrade to Hard-SPL V7 before I use the update the rom?
I went all the way back to Herm SPL 1.06 and Cingular WM5. Don't want to brick the phone so wanted confirmation before I do anything else. Can't afford for things to get more messed up.

Xyberz said:
Ok thanks for the uploads. Got the file. I just want to make sure if I should upgrade to Hard-SPL V7 before I use the update the rom?
I went all the way back to Herm SPL 1.06 and Cingular WM5. Don't want to brick the phone so wanted confirmation before I do anything else. Can't afford for things to get more messed up.
Click to expand...
Click to collapse
Well I like using Hard-SPL V7 especially for the cooked roms as it gives you a bit of safety, but the rom I uploaded here is the Official HTC America / ATT Rom so you can follow their flash instructions for it. I even successfully flashed this ROM from VISTA 64 bit with no problem to my Herm 100.
As with any Flashing their is always a risk if something should go wrong that you will have a brick but your already near that point as you can't do anything with the phone at this point anyway.
GL & let us know how you make out.

Invalid Tool Error

So..my phone is rather useless at the moment. Won't load the rom after freezing up while i slept last night. I go into bootloader and try to reflash but get the error "Invalid update tool" and it says something about a newer version. Has anyone had this error or know how to fix it? I am in desperate need of assistance here. Thank you for all replies in advance.
Edit: The exact error is as follows
Code:
ERROR[300]: INVALID UPDATE TOOL
This Update Utility cannot be used for your PDA Phone. Please get newer Update Utility.
I was running Kavana cooked rom 6.1.
I have tried to reflash with atleast 5 different roms and they all present this error.

Just checking, but did you try the default ROM for your device? If it is a T-mobile Dash, you will want to use one the the Tmobile stock ROM's first.

cswroe said:
Just checking, but did you try the default ROM for your device? If it is a T-mobile Dash, you will want to use one the the Tmobile stock ROM's first.
Click to expand...
Click to collapse
Yeah, I tried them and got the same error. Thanks, though.

OxR said:
So..my phone is rather useless at the moment. Won't load the rom after freezing up while i slept last night. I go into bootloader and try to reflash but get the error "Invalid update tool" and it says something about a newer version. Has anyone had this error or know how to fix it? I am in desperate need of assistance here. Thank you for all replies in advance.
Edit: The exact error is as follows
Code:
ERROR[300]: INVALID UPDATE TOOL
This Update Utility cannot be used for your PDA Phone. Please get newer Update Utility.
I was running Kavana cooked rom 6.1.
I have tried to reflash with atleast 5 different roms and they all present this error.
Click to expand...
Click to collapse
I know this might be a stupid question of me but, did you do a hard reset?
Why would you make another thread regarding issues with your phone, when you already have a thread going about problems with your phone?
Please post accordingly You should've posted this other issue on your previous thread, rather than making a new one! Can you imagine if everyone would make a thread for every little issue with their phone?

roloracer said:
I know this might be a stupid question of me but, did you do a hard reset?
Why would you make another thread regarding issues with your phone, when you already have a thread going about problems with your phone?
Please post accordingly You should've posted this other issue on your previous thread, rather than making a new one! Can you imagine if everyone would make a thread for every little issue with their phone?
Click to expand...
Click to collapse
It won't hard reset. I made a new topic because this is a completely different problem. I apologize if it was not necessary.

Bump.
Any ideas at all?

Ah yes.
My bomb didn't detonate until some time Wed/Thu night. 6am Thu morning I had to be at my local Polling Station where I was to be the 'Presiding Officer'.
Bad, bad timing.
Still, I managed a hard reset without the SD card in, (this took a few attempts), and having basic phone function, off I went to do my bit for European Democracy - honestly, the whole thing would be chaos without me ...
Anyway, I digress. I do that quite a lot. There was this one time ...
... I didn't get 'round to trying to sort it all out until Sat afternoon, (the phone, not the European Parliament), and as I have flashed this phone to buggery and beyond I expected it to take little time.
Ha. Ha. Ha.
I downloaded the latest version of the Energy ROM, (love it, love it, love it), ran the .bat file and; error 270.
I sparked up the bootloader and, of course, no connected device meant no update. I tried various 'stock' ROMs and got the same error you describe.
In UK, my provider is BT and there is no image link in the stickies, (I have finally found one, I will send a Mod a link), and tracking a full basic .exe image proved really difficult.
However, once found, all my problems evaporated.
So, find an executable basic ROM image from the phones' original provider, fire up the bootloader, run the .exe and a few minutes later you will be able to reflash.
Honest.
I believe you can also load the image as a .cab file onto the SD card and install from there but I didn't have to investigate this so can't promise anything. Sorry.
The ROM image is the key.
Once the bomb detonates, hard reset etc seems to become a bit flakey - keep trying.
I'm rambling again, aren't I?
Another beer I think ...
** Edit **
Yes, of course the BT ROM is now working.
Now I don't need it.
Ah well.

Energy ROM semi bricked my Dash, help needed! (And appreciated)

Hello everyone, I am really new to this forum having received the Dash 2 days ago. Looking to get it up to speed I flashed the 6.5 Energy Rom according to instructions. I think that was a very bad move, because now the cellphone is stuck on the Loading Energy Rom screen. I have searched the forum for answer and have already tried the following:
1- Entering bootloader and flashing original ROM. No luck because EVERY rom I have gotten, be it from here and T-Mobile, it says invalid vendor ID.
2-Tried to perform a hard reset. Did not work.
3-Flash the original ROM through the memory card. No avail.
The phone cannot connect to active sync, so I can't install any cooked ROMS. I think the solution is installing the original ROM by the bootloader, but I cant seem to find a compatible one. My cell information is the following:
Bootloader screen info: ONBL 1.22.0000 SPL 1.22.0000 IU
EXCA 100 S/N SZ713FE05873.
Is there any way with that information someone can tell me which ROM to use? Or any other tip/hint/suggestion? Any help will be greatly appreciated!

I have the same Bootloader screen info: ONBL 1.22.0000 SPL 1.22.0000 IU value and i was able to restore my phone to working status with the following ROM
http://www.megaupload.com/?d=IJIVTIMF
Hope this help
10507

Thank you very much 10507! I'll download it now and see if it works.

Thanks for the file but it appears that it is for the SDA. It dit not work

luisro said:
Thanks for the file but it appears that it is for the SDA. It dit not work
Click to expand...
Click to collapse
That's odd, I was able to restore my Excalibur/Dash after flashing the corrupted EnergyRom.
Hope you will find a way to resolve your problem.
10507

But how did you do it? Flashing it through USB or through the memory card? The weird thing is that when I run the EXE the cellphone that appears in the picture of the program is an SDA. But well I will try it again and thank you for the help!

I used bootloader method and connected my phone through USB for flashing. Remember to remove your memory card when flashing.

well, I've been in your situation for almost 3 days now, and still no solution for it, maybe it's time to put it in the box and purchase a new one , all thanks to the broken EnergyROM ...

Ok guys. Don't give up. Believe it or not, a Dash is NOT easy to brick like some other devices. the steps are fairly clear but let me refresh:
- Go into bootloader by holding the camera button and powering on the phone
- Connect the USB cable, you will hear the ba-bing USB connect sound on your PC (if u don't thats why you're having issues flashing)
- Download and unpack a "factory sealed" signed ROM. I use this one: http://rapidshare.com/files/7886560...S_1.33.422.1_4.1.13.51_03.07.90_Ship.exe.html
- With USB connected and the phone in the multicolor bootloader, run RomUpdateUtility.exe, check the boxes, it next, bla bla bla.
- It will look for your device for 20 seconds. then hit "update" and next.
- It should then start flashing the Excalibur Brightpoint Factory ROM back onto your phone
- If you can't get this far or it fails, try a different PC or Flash from the SDcard
** NOTE: If flashing from USB, REMOVE the SD CARD! This is the biggest mistake of most people trying to flash from USB.
Good luck.

ookba said:
Ok guys. Don't give up. Believe it or not, a Dash is NOT easy to brick like some other devices. the steps are fairly clear but let me refresh:
- Go into bootloader by holding the camera button and powering on the phone
- Connect the USB cable, you will hear the ba-bing USB connect sound on your PC (if u don't thats why you're having issues flashing)
- Download and unpack a "factory sealed" signed ROM. I use this one: http://rapidshare.com/files/7886560...S_1.33.422.1_4.1.13.51_03.07.90_Ship.exe.html
- With USB connected and the phone in the multicolor bootloader, run RomUpdateUtility.exe, check the boxes, it next, bla bla bla.
- It will look for your device for 20 seconds. then hit "update" and next.
- It should then start flashing the Excalibur Brightpoint Factory ROM back onto your phone
- If you can't get this far or it fails, try a different PC or Flash from the SDcard
** NOTE: If flashing from USB, REMOVE the SD CARD! This is the biggest mistake of most people trying to flash from USB.
Good luck.
Click to expand...
Click to collapse
Thanks ookba for cheering us up. I'm having the same problem like many, many people in this forum hopeless seeing our dash not responding to every solution proposed in this forum and the only thing that we have right now is keep trying to flash and see if it works. I will try again in different PC and see what happens. I'll let all of you know if I finally resurrect my s621.

Thanks everyone for all the help! It's hard to find people that are so helpful on internet forums. I'm still in the same situation as gmaniac and alexalexoe but hopefully we can find something that will fix our problems

luisro said:
Thanks everyone for all the help! It's hard to find people that are so helpful on internet forums. I'm still in the same situation as gmaniac and alexalexoe but hopefully we can find something that will fix our problems
Click to expand...
Click to collapse
This problem is ridiculously weird to why some members are able to restore their phone to original factory condition, and others are not able. Therefore, I have search from trustworthy sites and from friends for difference made ROM. Hopefully, one of these ROMs with help out anyone...........
1.33.422.1 (Worldwide English, WM6)
http://rapidshare.com/files/7886560...S_1.33.422.1_4.1.13.51_03.07.90_Ship.exe.html
1.27.405.1 (Worldwide English, WM6)
http://rapidshare.com/files/100235639/HTC_S620_WWE_1.27.405.1.exe
1.22.531.6 (T-Mobile USA, WM6)
http://www.mediafire.com/download.php?z4vjgzxisrz
1.22.531.4 (T-Mobile USA, WM6)
http://www.mediafire.com/download.php?yygkw1d5xmc
1.11.531.1 (T-Mobile USA, WM5)
http://rapidshare.com/files/104641948/T-Mobile_DASH_WM5_V_1.11.531.1.exe.html
Excalibur_BRIGHTSTAR_PTB_1.30.514.2_4.1.13.47_ 02.98.90_Ship
http://www.mediafire.com/?9gbwdzd2omg

Thanks 105507 but no success at all, I even found 2 more factory roms in the web and also they don't work. I own an unbranded international version s621 manufactured by Brightstar corporation (I tried to flash Brightstar's stock rom but it didn't work) and I noticed this because in the warranty docs it says brigthstar corporation and originally the phone came with WM5.

not that this will help. but this is one of the reasons why people should be really installing the hardspl so if you have a bad flash, you dont have to install a stock rom. any rom whether be it cooked or not will work. but this hardspl must be done prior to installing ANY rom. the hard spl is done by jockyw2001. send him a pm to see if theres anyway to get that on the phone, even in its current state.
edit: here's the link to the hardspl: http://forum.xda-developers.com/showthread.php?t=329605

luisro said:
Hello everyone, I am really new to this forum having received the Dash 2 days ago. Looking to get it up to speed I flashed the 6.5 Energy Rom according to instructions. I think that was a very bad move, because now the cellphone is stuck on the Loading Energy Rom screen. I have searched the forum for answer and have already tried the following:
1- Entering bootloader and flashing original ROM. No luck because EVERY rom I have gotten, be it from here and T-Mobile, it says invalid vendor ID.
2-Tried to perform a hard reset. Did not work.
3-Flash the original ROM through the memory card. No avail.
The phone cannot connect to active sync, so I can't install any cooked ROMS. I think the solution is installing the original ROM by the bootloader, but I cant seem to find a compatible one. My cell information is the following:
Bootloader screen info: ONBL 1.22.0000 SPL 1.22.0000 IU
EXCA 100 S/N SZ713FE05873.
Is there any way with that information someone can tell me which ROM to use? Or any other tip/hint/suggestion? Any help will be greatly appreciated!
Click to expand...
Click to collapse
My phone is the same your phone but ONBL 1.33.0000 and SPL 1.33.0000
I'm trying to find the original rom of this line but not found. Please help me!

Have you done a reset? My friend fixed his by trying reset a few times. He reset it, walked away...., it took long time to see whether it booted over; if not, do it again...
By the way, he leave the sim card in; and, you need to remove your micro sd card.

On an official site it is possible download ROM for your phone. It is flashing from bootloder mode. It some times helped me, while I have not flashed hard SPL.

luisro said:
Thanks everyone for all the help! It's hard to find people that are so helpful on internet forums. I'm still in the same situation as gmaniac and alexalexoe but hopefully we can find something that will fix our problems
Click to expand...
Click to collapse
Hi my friend, I wish you lucky!!!
by the way, where country you're from, I have some Shipped Roms here for brazilian Excalibur (S621), maybe it could help, if the answer is yes, let me know to made this one come to you

http://wiki.xda-developers.com/index.php?pagename=Elf_GoldCard

Furious Girlfriend (oh My beloved Helloween died with my ROM's)
Boy oh Boy...
My ROM's are now in heaven
Girlfriend deleted they (I'm so sorry...)
But, pay attention in this thread
http://forum.xda-developers.com/showthread.php?t=381726
In there have a sort of shipped ROM's and maybe coud help you
Good luck my friends
A friend from XDA have some Shipped Rom's and will upload it for you, shortly he'll post something here

ROM Recommendations (see inside)

Hey there,
After lots of problems with my P3300 (see this thread), I've decided to flash it to see if that helps. I'm not too bothered about getting the GSM working again as I have another phone, but I'd like to be able to run all apps again.
So... I'd like some advice please.
What would be the best ROM for me to use if I just want to use the phone as a GPS device, portable wifi web browser and notepad?
Basically something pretty stripped down with as good battery life as possible.
Is there any advantage with going for WM6 over WM5?
Bear in mind I've never done this before and am currently reading up on all of it.
From what I've read so far I'll have to do the CID unlock first (currently have WM5 in french installed and would like an english ROM)? I think it may be unlocked already but am not sure. Is there a way to check? Do I risk anything if I run USPL even though the phone is already unlocked?
Thanks in advance for any advice!

You can check if your phone is CID unlocked if the SPL number which comes up while booting during the big white HTC screen says 1.11.0000. If it says anything other than that then it's not unlocked.
Best stripped rom for me is Sheen's clean base version 3. Check it out, it's on the first page of the thread.

alternatively, if u want fast and stripped, go for yues extraclean (see my signature)
greetz

ferfecir Clean
This is the best clean rom which is a modified version of Yues clean with 30mb free ram.
http://forum.xda-developers.com/showthread.php?t=531972&highlight=ferfecir

mta33 said:
This is the best clean rom which is a modified version of Yues clean with 30mb free ram.
http://forum.xda-developers.com/showthread.php?t=531972&highlight=ferfecir
Click to expand...
Click to collapse
Pagepool 4 MB
RAM 32 MB
ROM 69 MB

Thanks for the replies. My SPL says 1.12.0000 so I guess I need to do the CID unlock.
Ferfecir Build 20931 looks like the most promising from those.
Can anyone please point me to a good tutorial for flashing the ROM via activesync? I'd rather not have to format the memory card if I can avoid it and my soft reset button is broken. (I have serached but had no luck)
Thanks!

download uspl from here http://forum.xda-developers.com/showthread.php?t=311403
and any rom you want...
unpack the uspl
plug the cable in the device and establish a usb connection
run the "start_uspl.exe" be patient...after being prompted to click some "next buttons" follow the procedure...and i mean it...follow the procedure...that with 50% battery,no programs running on the pc,no unplugging the cable and so on...
and you will have the uspl flashed
go to boot loader...The bootloader is invoked by pressing down the Power and Voicedialer buttons simultaneously, and using the stylus at the same time to press the RESET button at the left side. Continue pressing the two buttons for a few seconds after pressing and releasing the reset button until the bootloader screen appears.
if uspl says 1.11.000 then you are good to go
now you can flash any rom (cooked for artemis) and any artemis radio (i recommend you the 3.34.90.) onto your artemis
simply download,extract,run the rom update utility (RUU) ,follow the procedure and watch the show...
if you ever get an error during flash or anywhere else in the rom update utility...refer to this page and troubleshoot your troubles http://wiki.xda-developers.com/index.php?pagename=RUU_Errors
if you get an error saying invalid file size or something like that (you will get it if you try eg this rom..http://forum.xda-developers.com/showthread.php?t=465291)
go to this thread http://forum.xda-developers.com/showthread.php?t=521406 download the file and flash it if it is an ordinary rom...just run the RUU
afterwards just check it in the bootloader if it says 1.11.cmon it is ok....and you will be able to flash virtually any rom cooked for artemis onto yours

i must be damn crazy to post this thing...because it is all there in the wiki and the forum stickies,believe it or not

Thank you very much for the detailed instructions.
Just two more questions!
My reset button is broken. Can I just turn the phone off and back on to check if I have 1.11.0000 instead of using the bootloader?
And the RUU is this one? http://code.google.com/p/htc-flasher/downloads/list (only file I have for the new Ferfecir ROM is a .nbh, is that all I need?)
Thanks again.

this is a very open-ended question.
Everyone on here will have their own favourite rom....if there was 1 definate fits-all "best" rom ...everyone would be using it..but there isnt and we are all using the rom that suits us best
some people want their phone to be more like an iPod and so the multimedia aspect is a priority along with decent graphics and animated menus
some people want the PDA functionality most so they want a really stripped-down fast rom that is reliable and handles email well
everyone wants to use it their own way....thats why this site exists.
The guys who make these ROMS are the guys who say "this is good, but i want it to be more like THIS."
Follow farukb's (excellent) instructions....unlock your device properly....if you get any problems, search for the answer before asking for help....chances are hundreds of people will have had the same problem and hundreds of people will have already given the answer...and then ....just look around the site. See which roms are available that fit YOUR needs, and flash it....if you dont like it, try another.
I'm trying 6.5 roms at the moment and love it....i've flashed it probably once a week with a new ROM each time a new version is released and have seen the OS evolve....right now i'd say PDhee's Mega 6.5 M2D rom is the best of the bunch providing you're not planning on installing LOTS of exra programs.
that's the beauty of these things, if you dont like the ROM, just try another. Sometimes the ROM won't work quite right (especially if flashing ROMs between different cooks) so just try flashing it again to make sure it resets everythin correctly. If it's still not right, try a different ROM.
farukb said:
i must be damn crazy to post this thing...because it is all there in the wiki and the forum stickies,believe it or not
Click to expand...
Click to collapse
yeah, unfortunately (and it seems to have increased over the last year or so) nost people on here are noobs who can't be bothered to read through some threads or use the search and we just get the same questions asked constantly.
I dont minds helping people....providing they've looked for the answer themselves first.
every time a new rom is released there will be people asking what error 260 or 270 means?, do they need to USPL? etc etc
it's easier to ask someone else to take time out of their day to aswer your question than just type "error 260" into the search box and find out for yourself. They dont consider that people are having to answer these questions 10 times a week, in their own time, for no thanks, just to have the same question asked the next day. Purely becuase they couldn't be bothered to see if anyone else has asked that question before.
sorry...rant over....i love you all

seebasso said:
Thank you very much for the detailed instructions.
Just two more questions!
My reset button is broken. Can I just turn the phone off and back on to check if I have 1.11.0000 instead of using the bootloader?
And the RUU is this one? http://code.google.com/p/htc-flasher/downloads/list (only file I have for the new Ferfecir ROM is a .nbh, is that all I need?)
Thanks again.
Click to expand...
Click to collapse
no
you need to use the reset button (stick the stylus in the reset hole) .
Reset is like turning your computer off and on again
Power button is like turning the monitor off....it doesnt stop programs running and it doesnt properly reboot the device.
Your only alternative is taking the batter out i think (just like pulling the plug out will also reboot your computer).
If you havent already run USPL, then you probably WILL need to do it.
i dont know the specific ROM you're talking about, but just an NBH file will NOT work. You need the EXE file to run it.
Just download any suitable ROM off this site and it will have the whole package....if you're downloading from another site you'll have to ak that other site for help

my reset button doesn't work. i took the phone apart to change the touchscreen and must have misaligned something when putting it back together. sticking the stylus in the hole doesn't do anything anymore. will take the battery out instead, thanks.
regarding the rom, it is one i downloaded from here: http://forum.xda-developers.com/showthread.php?t=531972&highlight=ferfecir
the rar file downloaded from 4share (http://www.4shared.com/file/112067347/72728603/ARTEIMG-Ferfecir_-_20931_en_gncel_hali.html) only contains the nbh, no exe.
and for the record, i've spent all afternoon/evening researching this, searching this forum and the wiki etc! i appreciate it's annoying answering the same noob questions over and over again but i thought my thread was specific enough to warrant it and am grateful for all the replies.

seebasso said:
regarding the rom, it is one i downloaded from here: http://forum.xda-developers.com/showthread.php?t=531972&highlight=ferfecir
the rar file downloaded from 4share (http://www.4shared.com/file/112067347/72728603/ARTEIMG-Ferfecir_-_20931_en_gncel_hali.html) only contains the nbh, no exe.
and for the record, i've spent all afternoon/evening researching this, searching this forum .....
Click to expand...
Click to collapse
...yeah, and if you read ferfercirs description fully, you will come past "sd-card-flashing" which is the way to flash the *.nbh -part of your rom in a way without needing an activesync connecton
greetz

i did read that bit
but as mentioned a couple of times in this thread already, my reset button is not operational so i cannot use bootloader (afaik). so i assumed there was another way.
but i guess i'll find a rom that comes an an exe and save myself some trouble

no need to keep searching,
u can simple take the provided *.nbh file that came without an exe, rename it to ruu_signed.nbh, exchange the existing RUU from a complete installer-routine and off u go, provided u have used uspl first
greetz

ok thank you once again, i'll try it tonight.
one final question! do i need to have a sim card inserted while running USPL or does it not matter?

It is recommended to remove both your SIM card and your MicroSD card during any type of flashing, whether it be USPL or ROM. Even my reset button is not working anymore, my phone got dropped in water and I had to give it for repairs. After motherboard change they assembled it slightly wrong I guess, and it doesn't work. But I can still get into bootloader by just pressing the Voice record and power buttons together for 10 seconds. Try that.
Secondly, I hate to be plugging myself here, but I have just cooked a clean 6.1 ROM myself, with the latest build of 6.1 that is 21054. you might want to check that out, it comes with the full package and not just the nbh
here it is - (http://forum.xda-developers.com/showthread.php?t=551728)
Again, sorry, but Im giving you an option thats all

thormdac said:
no need to keep searching,
u can simple take the provided *.nbh file that came without an exe, rename it to ruu_signed.nbh, exchange the existing RUU from a complete installer-routine and off u go, provided u have used uspl first
greetz
Click to expand...
Click to collapse
ok i need help again sorry! i tried this but i got an error after 5% saying the .nbh was an invalid size
i used the ROMUpdateUtility.exe from Arte_WM65_23009_M2D_Mega_beta1 ROM (i removed Arte_WM65_23009_Mega_b1.nbh from the folder and replaced it with Ferfecir's .nbh which I had renamed to ruu_signed.nbh)
What did I do wrong?
I ended up flashing with Arte_WM65_23009_Mega_b1.nbh and it worked great but that ROM is too much for me and I want Ferfecir's simpler one.
Thanks

You need to flash the newer USPL which allows nbh files of a smaller size to be flashed.

thanks! it worked. everything working perfectly and my gsm works again too. woohoo.

Keyboard still not mapped correctly after cab install!

I was not the only user having this problem. There was actually a bounty set for a fix, but I havent seen one yet. Flashed Energy Rom Sense 2.5 and 2.1, provisioning didn work, and neither did cab install for correct key layout. Numbers still across the top row, and most symbols still incorrectly mapped. Seems to be first tilt configuration and nothing will change it back.
The strange thing in my case was before I ever flashed ANYTHING SPL, ROM radio...anything...,(bone stock) my HW keyboard would auto remap to these settings out of nowhere. Two different devices had this problem, i took the first one back, and this one being the second. a soft reset would set configuration back to stock before flash, but now even the cabs available will not change anything. I got a $20 for a .cab fix or a detailed xplnation of how to fix this, and have the entire HW keyboard mapped in english and to at&t tilt 2 configuration that will work on this device
Please Forgive the rant in the prior post concerning this issue, as this has become quite frustrating lol, and I have owned every HTC device at&t has sold and loved em all, but had to hunt fixes for every single one. Ive learned a lot in the process, but sometimes time is limited to be able to constantly search for what would seem to be a simple fix. If you will notice, for as long as long as I have been a member of this great community, I have made very few posts, and asked few questions on my different devices ...I read searched and read some more. I had xda google search as my homepage for a loooong time, help on this issuue would be greatly appreciated!!!

What cab did you use? There's a few floating around. I've tried dozens of roms and only seen this issue with one or two ROMs (both 2.5 roms) but went away after a hard reset. Are you hard resetting your device after flash?

Toleraen said:
What cab did you use? There's a few floating around. I've tried dozens of roms and only seen this issue with one or two ROMs (both 2.5 roms) but went away after a hard reset. Are you hard resetting your device after flash?
Click to expand...
Click to collapse
mskip said:
1. Make sure your microSD is Formatted to fat32 (you dont have to delete all files but it is safer if you do)
2. Download your prefered Rom from the Rhodium Rom Develpoment Page and unzip/unrar it to your PC
3. Goto the Roms Folder and rename the .nbh file to RHODIMG.nbh
4. Copy the RHODIMG.nbh file to the root of your MicroSD Card
5. Plug the MicroSD Card into the phone
6. Enter the BootLoader screen, you will first see a tri-color screen with the phone and SPL Information at the top
7. Follow the On Screen instructions to start the update
8. After flash has completed, press the reset button with the stylus to reset the device.
Click to expand...
Click to collapse
I thought it odd not to have to do a hard reset as left out in tutorial. I should have done it out of habit from flashing kaiser, and fuze, but no. I did not hard reset. I will try a new flash and do the reset this time. Hopefully thats all thats the problem! thank you very much, and cross your fingers for me lol. If it works I will def keep my word on 20!

DaIn BrAmAgE said:
I thought it odd not to have to do a hard reset as left out in tutorial. I should have done it out of habit from flashing kaiser, and fuze, but no. I did not hard reset. I will try a new flash and do the reset this time. Hopefully thats all thats the problem! thank you very much, and cross your fingers for me lol. If it works I will def keep my word on 20!
Click to expand...
Click to collapse
Just to help troubleshoot after you hard reset just install whichever keyboard cab you're using, soft reset, and test it out before installing anything or syncing.

thank you thank you thank you!
I cant believe thats all it was! Even more so I cant believe I didn even try the H R after flash. I never once failed to do this when flashing any other device, I guess b/c it was in the directions for noobs to do so in other forums, lol may ought to suggest adding it to the dir for flashing tp2 lol!
THANK YOU BIGTIME, once again! I had become frustrated after tryin multi cabs and reading where it worked for everyone else. all i did was re flashed, h-reset. cab was in uc folder, but that didn work, ended up using att provisioning provided by NRG, and there she was...working like a charm again!

Glad to hear it worked! Thanks for following up to, you're the first person with this issue I've tried helping that actually posted a followup.