The phone was acting like it was bricked.. not sure if it was a bad radio or a rom from another phone.. im really not sure... troubleshooting and looking into files now.
But..
I popped the back off (A few screws simple)
Covered the antenna leads with some non conductive tape and BOOM
Phone rebooted like new.
Here is the issue now
Its back on , i can use it, cell service seems fine and wifi seems fine.. so im assuming the ONE (of 3) antenna i had to leave covered to get to boot was GPS..
So not sure where to go from here.. Did hardreset , factory wipe, Darkside wipe, installed rom , kernal and radio, but still cant uncover the top center antenna lead or i get ZERO response when i close the phone back up.
Hopefully this could be an easy fix to some bricks out there.. ill update this when i find out why i cant uncover this last lead.
Depends what you mean by brick.. A lot of people lately been thinking low battery is bricked or even stuck buttons.
If your phone vibrates when trying to turn it on, then it isn't bricked.
Sent from my SGH-T989 using xda app-developers app
Teo032 said:
Depends what you mean by brick.. A lot of people lately been thinking low battery is bricked or even stuck buttons.
If your phone vibrates when trying to turn it on, then it isn't bricked.
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
The battery was cool, charged it over night, even tried my back up battery.. for some reason when i popped the back off (the screw on piece not the battery cover) it would turn right on.. but as soon as the contacts touched the back of the phone it would shut off and not respond.. i put tape over them.. wiped it to ****.. used odin to stock.. and then popped tape off the contacts popped the back back on and it works like a champ.. no idea why it worked.. but it did
Thanks for sharing your experience.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Hopefully I don't have to come back to this
But If I do, at least this is here
.
Sent from my SGH-T989 with Cyanogenmod 10 Alpha Power.
m0bmentality said:
The battery was cool, charged it over night, even tried my back up battery.. for some reason when i popped the back off (the screw on piece not the battery cover) it would turn right on.. but as soon as the contacts touched the back of the phone it would shut off and not respond.. i put tape over them.. wiped it to ****.. used odin to stock.. and then popped tape off the contacts popped the back back on and it works like a champ.. no idea why it worked.. but it did
Click to expand...
Click to collapse
Hey the bricked part I think gets thrown around too much I probably would of used a different word but can you help others who may have the same issue in the future and post a pic of exactly what you did to get it working again.
thx
Related
Ok my one and a half year old son got a hold of my Epic Touch and I dont know for how long he had it in the toilet.I knew this day would come but I was hoping for it to be my girlfriend's original Epic,lol.
So I took it apart,dryed it real good with paper towel first,then with air and baked it in oven for a minute or two.
I put it back together and it works!Its amazing because after my son diped it in water it layed wet for about twenty minutes before I found it.
I have one question for those that have more knowledge about Epic's internals:
Everything works except the POWER BUTTON!Yes I can use the power button one time to turn on the phone but after that it doesnt work anymore.
I cant turn off the phone,bring up the shutdown/airplane mode menu or anything else,in order to turn off the phone I need to pull battery.
Yes I took it apart again cleaned everything with rubbin alcohol inside and still same problem,any ideas?
Thanks in advance.
Oh,is there any apps out there that can map power button to search or home buttons?
lviv73 said:
Ok my one and a half year old son got a hold of my Epic Touch and I dont know for how long he had it in the toilet.I knew this day would come but I was hoping for it to be my girlfriend's original Epic,lol.
So I took it apart,dryed it real good with paper towel first,then with air and baked it in oven for a minute or two.
I put it back together and it works!Its amazing because after my son diped it in water it layed wet for about twenty minutes before I found it.
I have one question for those that have more knowledge about Epic's internals:
Everything works except the POWER BUTTON!Yes I can use the power button one time to turn on the phone but after that it doesnt work anymore.
I cant turn off the phone,bring up the shutdown/airplane mode menu or anything else,in order to turn off the phone I need to pull battery.
Yes I took it apart again cleaned everything with rubbin alcohol inside and still same problem,any ideas?
Thanks in advance.
Oh,is there any apps out there that can map power button to search or home buttons?
Click to expand...
Click to collapse
Maybe umm quickboot plus from the market can do it. Only $2
Sent from my SPH-D710 using Tapatalk 2
Do not power it back on.. Put it in a sealed bowl and fill it with rice. Leave it there for at least 24hrs. Even longer if you want the best result. It takes water damage a couple of weeks to really rear its ugly head. Sofar rice seems to be the best bet.
Good luck.. Report back to help out others with this same prob.
Definitely try the rice trick... I would recommend doing that before baking your motherboard in the oven.
The only time I've ever heard of baking any electronic device in the oven is for the Xbox 360...
Sent from my SPH-D710 using xda premium
Indrid Cole said:
Do not power it back on.. Put it in a sealed bowl and fill it with rice. Leave it there for at least 24hrs. Even longer if you want the best result. It takes water damage a couple of weeks to really rear its ugly head. Sofar rice seems to be the best bet.
Good luck.. Report back to help out others with this same prob.
Click to expand...
Click to collapse
I already took it apart and dried it,plus put it in oven.I would say that there is no need for rice now,rice is for those that want to dry inside without talkn the phone apart.Everything works but the power button which is really strange.
Mattix724 said:
Definitely try the rice trick... I would recommend doing that before baking your motherboard in the oven.
The only time I've ever heard of baking any electronic device in the oven is for the Xbox 360...
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
I just did that to make sure any remaing moisture was gone.Still no answer why I cant use the power button except to turn on the phone.
Are you on a custom ROM? if so, maybe its the ROM bugging out, not the phone. Just a wild guess.
Do the RICE deal as mentioned above it WORKS on all sorts of electronics!
Chew DZ said:
Are you on a custom ROM? if so, maybe its the ROM bugging out, not the phone. Just a wild guess.
Click to expand...
Click to collapse
Im starting to think that too,im gonna try reflashing and see what happens.Power button does work to turn the phone on but after this it doesn't.
I just don't want to reflash because i been running Blazer 4.0 for 3 months now(the longest i ever went without flashing,lol) and i added all types of custom apk"s to that rom.I would usually extract apk files from this rom and pit them in the new one but i odexed it,so no it looks like im going to have to make a whole new rom and that's a day gone.
He has already gone far and above the rice trick. That would be repetitive and unnecessary.
Also, rubbing alcohol is not a good solution. It leaves a film on the metal that is highly corrosive. You need denatured alcohol.
The power button has a two step contact. That button most likely needs to be replaced. You can order cheap on a wholesale parts website.
Sent from my SPH-D710 using Tapatalk 2
azyouthinkeyeiz said:
He has already gone far and above the rice trick. That would be repetitive and unnecessary.
Also, rubbing alcohol is not a good solution. It leaves a film on the metal that is highly corrosive. You need denatured alcohol.
The power button has a two step contact. That button most likely needs to be replaced. You can order cheap on a wholesale parts website.
Sent from my SPH-D710 using Tapatalk 2
Click to expand...
Click to collapse
Finally someone understands it.I don't think power button needs replacement because i use the power button to turn on the phone,lol.But after that power button doesn't work.The power button only works one time-to turn on the phone but that's it,so its not the button that's defective.Its gotta be software related or one of the chips that controls power button after the phone is on is fried.
I didnt kno the e4gt was out that long lol.. Either way anything could be going on.. It was dropped in water lol
Sent from my SPH-D710 using XDA
Try button remapper to resolve the power button ordeal. I personally would ditch the search button and use that as the new power button.
Sent from my SPH-D710 using xda premium
The likely reason its not functioning after you power on is a short somewhere created by the liquid. When powered off the short is not affecting but once on it disables the button. I dont think you can replace that button unless you've got some decent soldering skills and you cant really be sure that even that would fix it. Liquid is one of those wildcards when it comes to electronics. You dont know if your screwed from jump or if the liquid might rear its ugly head later... too unpredictable.
d12unk13astard said:
Try button remapper to resolve the power button ordeal. I personally would ditch the search button and use that as the new power button.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Just what i was thinking,what is the button remapper app called?
blackhawksnip3r said:
The likely reason its not functioning after you power on is a short somewhere created by the liquid. When powered off the short is not affecting but once on it disables the button. I dont think you can replace that button unless you've got some decent soldering skills and you cant really be sure that even that would fix it. Liquid is one of those wildcards when it comes to electronics. You dont know if your screwed from jump or if the liquid might rear its ugly head later... too unpredictable.
Click to expand...
Click to collapse
I already thought of that,i was thinking if i run the phone for a while and internals get warm that this little drop of water will evaporate(if that's what it is because i heated in in the oven pretty good,i couldn't even touch it),i will have to see after few days of usage.
i thought the one problem... would be it smelled like ****. :good:
lviv73 said:
I already thought of that,i was thinking if i run the phone for a while and internals get warm that this little drop of water will evaporate(if that's what it is because i heated in in the oven pretty good,i couldn't even touch it),i will have to see after few days of usage.
Click to expand...
Click to collapse
Lol the water emits an electrical shock when put in water which can damage any part of the phone.. Heating it up in a microwave is only resoldering the phone.. Wont fix an electrical shock that could have damaged a chip or a hardware button a led etc.. What would happen if you had a pc plugged in and dropped it in water while it was on? Just throw it in the microwave and itd be fine?
Sent from my SPH-D710 using XDA
elliwigy said:
Lol the water emits an electrical shock when put in water which can damage any part of the phone.. Heating it up in a microwave is only resoldering the phone.. Wont fix an electrical shock that could have damaged a chip or a hardware button a led etc.. What would happen if you had a pc plugged in and dropped it in water while it was on? Just throw it in the microwave and itd be fine?
Sent from my SPH-D710 using XDA
Click to expand...
Click to collapse
Lol,microwave?Who said anything about microwave?Im talking about regular oven,microwave will fry everything in few seconds.
Damn it,now its serious,phone wont go into Download Mode.When i try to put it in download mode i push "up" key for "Yes" and it flashes for about one second download mode,well not exactly it flashes this:
ODIN MODE(in red letters)
Product Name:SPH-700
Custom Binary Download:NO
Current Binary:Samsung Official
Downloading do not turn off target
It flashes that for about one second then it starts to boot into android.Another thing that i noticed is when i power on the phone i get Samsung Galaxy S2 logo then it disappears then the phone reboots and i get Samsung Galaxy S2 logo second time and then it boots into android.
So it boots after second galaxy s logo.I can still boot into CWM though that's only good thing.
Has anyone encountered similar phenomenon before?
i dropped my phone last night during heavy rain and forgot about him for about 30-45 mins when i went back out and got it the battery was out. i turned him on and he booted up to the lock screen but then i couldnt unlock it so i turned it off and put it in rice for about 12 hours and i turned it on and it got stuck at the lock screen again. Then it wouldnt boot up past the kernel splash at all nor go into recovery. i got it in download mode and odined to stock but still no go. It seems to be going very very very slow because i just randomlly found it in recovery and the volume controls were very slow and the home button wouldnt do anything. can someone help me? any advice anything to try out? its like its water damaged and bricked.
Edit: i got it to boot but it is the slowest thing ive ever seen. any suggestions?
lilajrestnom said:
i dropped my phone last night during heavy rain and forgot about him for about 30-45 mins when i went back out and got it the battery was out. i turned him on and he booted up to the lock screen but then i couldnt unlock it so i turned it off and put it in rice for about 12 hours and i turned it on and it got stuck at the lock screen again. Then it wouldnt boot up past the kernel splash at all nor go into recovery. i got it in download mode and odined to stock but still no go. It seems to be going very very very slow because i just randomlly found it in recovery and the volume controls were very slow and the home button wouldnt do anything. can someone help me? any advice anything to try out? its like its water damaged and bricked.
Edit: i got it to boot but it is the slowest thing ive ever seen. any suggestions?
Click to expand...
Click to collapse
Sounds like you have a water logged defective unit on your hands. Aside from dismantling the thing and drying out the insides, you probably have a paper weight on your hands.
Sorry man.
nikon120 said:
Sounds like you have a water logged defective unit on your hands. Aside from dismantling the thing and drying out the insides, you probably have a paper weight on your hands.
Sorry man.
Click to expand...
Click to collapse
thanks for the reply. i guess i need to find a new phone somewhere.
So I ordered a replacment and the guy emphasized on the "as long as its not water damaged" part so does anyone know if theres like a water damage indicator inside the phone that may have changed or show that some water may have gotten in the phone?
lilajrestnom said:
So I ordered a replacment and the guy emphasized on the "as long as its not water damaged" part so does anyone know if theres like a water damage indicator inside the phone that may have changed or show that some water may have gotten in the phone?
Click to expand...
Click to collapse
Majority of phones have a water saturation indicator on in the inside. However, I couldn't tell you where that is located in our's. You could search a bit on the internet, I'm sure you could find a tear down video or something.
Nikon said:
Majority of phones have a water saturation indicator on in the inside. However, I couldn't tell you where that is located in our's. You could search a bit on the internet, I'm sure you could find a tear down video or something.
Click to expand...
Click to collapse
I did a little search and apparently the only indicator is on the battery so I should have no problems. The phone does turn on it just takes about an hour to get passed the Samsung screen so hopefully they wont look too deep for any water problems.
Okay, so after letting my phone sit with no battery for like 5 hours i tried to turn it on and it worked 100%. It was back on stock since i odin'd stock FC09 on it. Then I flashed cwm and restored my backup and i ended up with the same touch screen problems. So now I'm back at the point where i just odin'd stock on my phone and it still won't boot passed the samsung screen. I'm going to take out the battery and let it sit. Can anyone explain why this is happening? Could this one time working event be just a random thing or is it from leaving the phone alone for the few hours I did? Any suggestions or thoughts?
lilajrestnom said:
Okay, so after letting my phone sit with no battery for like 5 hours i tried to turn it on and it worked 100%. It was back on stock since i odin'd stock FC09 on it. Then I flashed cwm and restored my backup and i ended up with the same touch screen problems. So now I'm back at the point where i just odin'd stock on my phone and it still won't boot passed the samsung screen. I'm going to take out the battery and let it sit. Can anyone explain why this is happening? Could this one time working event be just a random thing or is it from leaving the phone alone for the few hours I did? Any suggestions or thoughts?
Click to expand...
Click to collapse
The touch screen problems sound like it's hardware related. As for it not booting passed the sammy screen idk.
Hey guys
So my phone has for a while randomly froze and nothing but pulling the battery can fix it. I will say I believe it was from a water incident. What happened is I went out riding and it began to poor. My phone was in a water proof pocket but I got to a point where I could get shelter and I needed GPS to get back home. I pulled it out of my pocket and it was a bit wet to the touch. Moments after the screen went all horizontal lines and died. I pulled the batter immediately and went home and stuck it in a bag of rice. The water damage indicator is slightly tripped on the batter but nothing to bad I felt I should worry.
Anyway since then ive noticed it to freeze up. Ive tried reflashing and what not with no luck. The freezing seems to happen every few days and its just getting annoying. Im planning on going back to stock today so I can get the 4.3 update but wanted to see what else I should try too to get my phone working fully again.
Any advice would be great.
Thanks in advance
Water damage is water damage.
Sorry to here for your troubles...
If the components inside got wet and shot circuited slightly. Then that's why your getting that freezing. Because they might be minor moisture still inside the device.
Which is causing the problem. You could ultimately take the device apart, to make sure all the moisture is gone. But then you can run into problems from taking the device apart, if you don't put everything back together correctly.
Just my 2¢®™
Sent from my SAMSUNG-SGH-I317 using Tapatalk
brianmay27 said:
Hey guys
So my phone has for a while randomly froze and nothing but pulling the battery can fix it. I will say I believe it was from a water incident. What happened is I went out riding and it began to poor. My phone was in a water proof pocket but I got to a point where I could get shelter and I needed GPS to get back home. I pulled it out of my pocket and it was a bit wet to the touch. Moments after the screen went all horizontal lines and died. I pulled the batter immediately and went home and stuck it in a bag of rice. The water damage indicator is slightly tripped on the batter but nothing to bad I felt I should worry.
Anyway since then ive noticed it to freeze up. Ive tried reflashing and what not with no luck. The freezing seems to happen every few days and its just getting annoying. Im planning on going back to stock today so I can get the 4.3 update but wanted to see what else I should try too to get my phone working fully again.
Any advice would be great.
Thanks in advance
Click to expand...
Click to collapse
Sorry for the long response, wanted to be sure my process worked. Anyway What I did was restore to the stock rom using odin and used a PIT file I pulled from the forums. After that I went to dirty unicorn (my new favorite!) and now it works fine!! No problems what so ever. It has not froze at all since I have flashed it about 2 weeks ago.
Anyway I suggest others do this if they have the same issue. HOWEVER!!!! Please be sure to read how to use PIT files and make sure the PIT is for your device.
brianmay27 said:
Sorry for the long response, wanted to be sure my process worked. Anyway What I did was restore to the stock rom using odin and used a PIT file I pulled from the forums. After that I went to dirty unicorn (my new favorite!) and now it works fine!! No problems what so ever. It has not froze at all since I have flashed it about 2 weeks ago.
Anyway I suggest others do this if they have the same issue. HOWEVER!!!! Please be sure to read how to use PIT files and make sure the PIT is for your device.
Click to expand...
Click to collapse
You could write a " how too" thread. ..
Just a short tutorial telling us the steps. ..
It's a great way to record it for later. ..g
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
I fell in the water with my phone. Salt water at that. Once I came to, my phone had a blinking light coming from the camera flash. I took battery out and let dry. Today I got up, took phone completely apart, cleaned with contact cleaner. Was ALOT of salt inside the phone. Anyways I got it cleaned up as best I could, pretty clean. Let dry again for a few hours.
Its back together now, turns on. Screen goes all crazy, pink and fuzzy. Pulsing blue led on front for about 10 seconds. Then nothing. Tried USB to PC nothing.
I found these phone don't come fully apart. I can take out main board, camera and a few plastic parts. But that's it. Lots of phone to take apart but no guides past this point and all the teardowns bring me to the same point.
Any ideas? Maybe bath the screen and what left for electrical components in alcohol?
Thanks
Sent from my Nexus 7 using XDA Premium HD app
Can a mod move this to galaxy s3 i747 section? My bad
Sent from my Nexus 7 using XDA Premium HD app
Sea water messes up components, think you should consider a new phone
Yea bro I'm gunna say that trying to fix it is more money and effort then just buying a new one
I already bought a new phone. Got another i747m. $400 didn't wanna mess with used phones again, last 3 used phones all ended up having an issue one way or another. Save a few bucks gain a few headaches.
Thanks for confirming what I thought though.
I am going to investigate fixing the phone. Still.
I got it to boot more now, pulsing boot led, vol buttons make a sound when I press them. I used my multimeter to test most of the connections. Everything I could check is fine. I think there is more salt behind the screen and behind the 2 small PCB chips that I couldn't get off. Going to try excessive force this time. Nothing to loose.
Is it safe to use the battery still? Its not swollen or nothing. Or should I not bother being as the water mark on the battery is pink?
Sent from my Nexus 7 using XDA Premium HD app
ronedogg said:
I already bought a new phone. Got another i747m. $400 didn't wanna mess with used phones again, last 3 used phones all ended up having an issue one way or another. Save a few bucks gain a few headaches.
Thanks for confirming what I thought though.
I am going to investigate fixing the phone. Still.
I got it to boot more now, pulsing boot led, vol buttons make a sound when I press them. I used my multimeter to test most of the connections. Everything I could check is fine. I think there is more salt behind the screen and behind the 2 small PCB chips that I couldn't get off. Going to try excessive force this time. Nothing to loose.
Is it safe to use the battery still? Its not swollen or nothing. Or should I not bother being as the water mark on the battery is pink?
Sent from my Nexus 7 using XDA Premium HD app
Click to expand...
Click to collapse
The battery *should* be fine for a while. I've used a water damaged one for the longest time but it did spend a couple days in a bag of rice.
Hey.. I flashed cm12 unofficial ROM 2-3 months ago on my lg d855.. There weren't any major bugs.. But recently I noticed that sometimes when I press the power button to unlock it .. The touch screen seems to stop working.. This happens only on the lock screen... I Also tried holding the power button and try to tap the "power off / reboot" buttons.. It doesn't work too.. But.. The weird part is..when I sort of slap the screen it starts to work again .. My question is .. Is it a ROM bug? Or is it a hardware issue.. If its a software issue.. Then why does it start working when I slap it.. And if its a hardware issue.. Why does it only occur on the lock screen? Please help.. Thanks
Sent from my LG-D855 using XDA Free mobile app
2000ftt said:
Hey.. I flashed cm12 unofficial ROM 2-3 months ago on my lg d855.. There weren't any major bugs.. But recently I noticed that sometimes when I press the power button to unlock it .. The touch screen seems to stop working.. This happens only on the lock screen... I Also tried holding the power button and try to tap the "power off / reboot" buttons.. It doesn't work too.. But.. The weird part is..when I sort of slap the screen it starts to work again .. My question is .. Is it a ROM bug? Or is it a hardware issue.. If its a software issue.. Then why does it start working when I slap it.. And if its a hardware issue.. Why does it only occur on the lock screen? Please help.. Thanks
Sent from my LG-D855 using XDA Free mobile app
Click to expand...
Click to collapse
Its not hardware issue for sure. Try to unlock with 3 fingers i think i saw this solution somewhere in the forum.
2000ftt said:
Hey.. I flashed cm12 unofficial ROM 2-3 months ago on my lg d855.. There weren't any major bugs.. But recently I noticed that sometimes when I press the power button to unlock it .. The touch screen seems to stop working.. This happens only on the lock screen... I Also tried holding the power button and try to tap the "power off / reboot" buttons.. It doesn't work too.. But.. The weird part is..when I sort of slap the screen it starts to work again .. My question is .. Is it a ROM bug? Or is it a hardware issue.. If its a software issue.. Then why does it start working when I slap it.. And if its a hardware issue.. Why does it only occur on the lock screen? Please help.. Thanks
Sent from my LG-D855 using XDA Free mobile app
Click to expand...
Click to collapse
I haven't had this problem on the D851, but I would try updating your device to the newest version of Cyanogenmod.
Also, back when I had the G2 I went through this problem a lot and actually had about five of them because they were under warranty. The problem was that the seal for the screen would come undone, and it's hard to notice since the screen is literally the entire front of the phone. When this seal broke, water would seep in and cause chaos with the screen. Wouldn't work in certain parts and so much more. I haven't had this happen on the G3, but my seal has broken and I can see it, so it's only a matter of time before water gets in there (or until I get the screen replaced). I've always had this problem with LGs they're just so damn good that I live with it. I'd bet this is what's going on if it's not the hardware.
ItsJacobee said:
I haven't had this problem on the D851, but I would try updating your device to the newest version of Cyanogenmod.
Also, back when I had the G2 I went through this problem a lot and actually had about five of them because they were under warranty. The problem was that the seal for the screen would come undone, and it's hard to notice since the screen is literally the entire front of the phone. When this seal broke, water would seep in and cause chaos with the screen. Wouldn't work in certain parts and so much more. I haven't had this happen on the G3, but my seal has broken and I can see it, so it's only a matter of time before water gets in there (or until I get the screen replaced). I've always had this problem with LGs they're just so damn good that I live with it. I'd bet this is what's going on if it's not the hardware.
Click to expand...
Click to collapse
Absolutely... I can see... Whenever I press on the edges on any of the sides.. It sort of gets pushed in.. It looks like its not glued properly.. Its a bummer as the "screen" is the reason y I bought this.. From ur experience , does it stop working completely at some point?
Sent from my LG-D855 using XDA Free mobile app
2000ftt said:
Absolutely... I can see... Whenever I press on the edges on any of the sides.. It sort of gets pushed in.. It looks like its not glued properly.. Its a bummer as the "screen" is the reason y I bought this.. From ur experience , does it stop working completely at some point?
Sent from my LG-D855 using XDA Free mobile app
Click to expand...
Click to collapse
If you can push it in then the seal is definitely broken.
On my G2, when in a moist and humid environment condensation would form on the inside of the device, but it was nothing too big and went away after a while. However, when too much fluid built up in the inside it began typing on its own. Furthermore, it got to the point where certain parts of the screen were unresponsive. This is why I had about five of them because over time it did get bad.
Although if there is water in the device rice usually absorbs it. Get a ziplock bag and fill it with rice. Take your battery, sim card, and sd card out, then place the phone in the bag full of rice. Seal it and shake it up a bit and let it sit over night. Keep the back cover off as well. If this is an option. I understand you might need your phone, but if you get a time where about eight hours are free I would highly recommend this. I have no idea how it works, but it takes the moisture out of the phone. I've done this with waterlogged phones, my G2, etc.
When I did that on the G2 it fixed my problems until moisture got back in there. I don't take care of my phones too well, so moisture got back in fast. Try this out and if it works just avoid keeping your phone in moist places (like playing music in shower, being on it while raining, etc.). If this fixes the problem it should hold you off until you can get the screen resealed or a new screen.
If it is with the hardware and its still under warranty I would get a replacement. I would revert to the stock ROM (if you made a backup) or find one and make sure it's updated. I would then do a full unroot, and attempt to make it so they cannot tell it was rooted. I would then attempt to get the replacement. Rooting voids the warranty, but if you unrooted I doubt they could tell. Furthermore, if you have insurance on the phone this could also work.
Edit: If you try the rice then try to replace the screen I would ensure that the current screen works properly after the rice. Make sure all the moisture is out before you replace the screen that way no moisture is trapped in there.
ItsJacobee said:
If you can push it in then the seal is definitely broken.
On my G2, when in a moist and humid environment condensation would form on the inside of the device, but it was nothing too big and went away after a while. However, when too much fluid built up in the inside it began typing on its own. Furthermore, it got to the point where certain parts of the screen were unresponsive. This is why I had about five of them because over time it did get bad.
Although if there is water in the device rice usually absorbs it. Get a ziplock bag and fill it with rice. Take your battery, sim card, and sd card out, then place the phone in the bag full of rice. Seal it and shake it up a bit and let it sit over night. Keep the back cover off as well. If this is an option. I understand you might need your phone, but if you get a time where about eight hours are free I would highly recommend this. I have no idea how it works, but it takes the moisture out of the phone. I've done this with waterlogged phones, my G2, etc.
When I did that on the G2 it fixed my problems until moisture got back in there. I don't take care of my phones too well, so moisture got back in fast. Try this out and if it works just avoid keeping your phone in moist places (like playing music in shower, being on it while raining, etc.). If this fixes the problem it should hold you off until you can get the screen resealed or a new screen.
If it is with the hardware and its still under warranty I would get a replacement. I would revert to the stock ROM (if you made a backup) or find one and make sure it's updated. I would then do a full unroot, and attempt to make it so they cannot tell it was rooted. I would then attempt to get the replacement. Rooting voids the warranty, but if you unrooted I doubt they could tell. Furthermore, if you have insurance on the phone this could also work.
Edit: If you try the rice then try to replace the screen I would ensure that the current screen works properly after the rice. Make sure all the moisture is out before you replace the screen that way no moisture is trapped in there.
Click to expand...
Click to collapse
First of all.. Thank you soo much.. Thank you for the time.u put into these posts.. It has really helped me.out a lot.. I can totally see how the rice method could work.. But it has not got to the point where its un-usable.. As I said, its only in the lock screen.. It has never ever occurred during actually using it.. I haven't found any dead spots.. Nothing.. If I use the rice trick to take out the moisture,, and if I can use the same screen (which should still work) can I just take it out and glue it in to place? What type of adhesive should be good... I'm asking this because I got this from abroad.. And it's not an international warranty. So there's no way I'm getting a warranty replacement .. So ive gotta make with what I have.. But this is very sad though, specially from such a big company.. I mean gluing a screen is not that hard.. I played loads.. Lol.. I really hope hot glue works lol..
Sent from my LG-D855 using XDA Free mobile app
2000ftt said:
First of all.. Thank you soo much.. Thank you for the time.u put into these posts.. It has really helped me.out a lot.. I can totally see how the rice method could work.. But it has not got to the point where its un-usable.. As I said, its only in the lock screen.. It has never ever occurred during actually using it.. I haven't found any dead spots.. Nothing.. If I use the rice trick to take out the moisture,, and if I can use the same screen (which should still work) can I just take it out and glue it in to place? What type of adhesive should be good... I'm asking this because I got this from abroad.. And it's not an international warranty. So there's no way I'm getting a warranty replacement .. So ive gotta make with what I have.. But this is very sad though, specially from such a big company.. I mean gluing a screen is not that hard.. I played loads.. Lol.. I really hope hot glue works lol..
Sent from my LG-D855 using XDA Free mobile app
Click to expand...
Click to collapse
Well then I'd try to fix it before it does get unstable! Thing with the lock screen is you're swiping and the moisture defuses the area you're touching which could cause problems. Definitely try the rice! However, I wouldn't recommend gluing it yourself. I imagine it requires some sort of water and heat resistant glue to be effective, and on top of that a professional application. Hot glue definitely won't work! I imagine you want something that looks nice and I can only seeing that being messy and leaving residue. Furthermore, I'm not entirely sure on what lies beneath the screen and if disturbing that could cause further problems. However, I understand you're probably planning on it so please watch a guide such as: https://www.youtube.com/watch?v=PcoEQVtUwYQ to see how it's done and what you need. There seems to be a lot more to it than just placing some glue on the screen and pressing it back down.
I'm sure you can get a replacement kit with instructions and all the required tools to do it properly for not too steep of a price. Check this out: http://www.ebay.com/itm/Replacement...46?pt=LH_DefaultDomain_15&hash=item54198f441a
Or you could take it to a professional like those at Broke Ass Phone: http://www.brokeassphone.com/smartphone-repair-selection/lg-smartphone-repair/lg-g3/ The price is steep, but it's professionally done and comes with a warranty.
Good luck to you!
ItsJacobee said:
I haven't had this problem on the D851, but I would try updating your device to the newest version of Cyanogenmod.
Also, back when I had the G2 I went through this problem a lot and actually had about five of them because they were under warranty. The problem was that the seal for the screen would come undone, and it's hard to notice since the screen is literally the entire front of the phone. When this seal broke, water would seep in and cause chaos with the screen. Wouldn't work in certain parts and so much more. I haven't had this happen on the G3, but my seal has broken and I can see it, so it's only a matter of time before water gets in there (or until I get the screen replaced). I've always had this problem with LGs they're just so damn good that I live with it. I'd bet this is what's going on if it's not the hardware.
Click to expand...
Click to collapse
Hi, ItsJacobee,
Sorry for breaking in, I have the same issue with 2000ftt, and I did tried "rice trick" but no luck. I think the screen is perfectly fitted in the case, when I press the edges, the feel is solid and no room for further pressing in.
My device is D855, I flashed many custom roms (resurrectionremix, CM12, Nameless ROM, CloudyG3 2.1), the mentioned issue happens to many of them but never happened in CloudyG3 & stock rom.
Any idea?
Best regards.
D855Lover said:
Hi, ItsJacobee,
Sorry for breaking in, I have the same issue with 2000ftt, and I did tried "rice trick" but no luck. I think the screen is perfectly fitted in the case, when I press the edges, the feel is solid and no room for further pressing in.
My device is D855, I flashed many custom roms (resurrectionremix, CM12, Nameless ROM, CloudyG3 2.1), the mentioned issue happens to many of them but never happened in CloudyG3 & stock rom.
Any idea?
Best regards.
Click to expand...
Click to collapse
Is it under warranty or do you have insurance on the phone?
ItsJacobee said:
Is it under warranty or do you have insurance on the phone?
Click to expand...
Click to collapse
Yes, it is under warranty, I am going to restore stock ROM and take it to service center. But I don't know how to trigger the issue (touch screen no response at lock screen while using power button to wake up), in stock rom and cloudyG3, this problem never happen.
Best regards,
D855 Lover.
D855Lover said:
Yes, it is under warranty, I am going to restore stock ROM and take it to service center. But I don't know how to trigger the issue (touch screen no response at lock screen while using power button to wake up), in stock rom and cloudyG3, this problem never happen.
Best regards,
D855 Lover.
Click to expand...
Click to collapse
Restore Stock ROM AND do a full unroot beforehand.
ItsJacobee said:
Restore Stock ROM AND do a full unroot beforehand.
Click to expand...
Click to collapse
Thanks for reminding. I restored the phone to stock with the downloaded .TOT file, then go to service center.
I can't trigger the problem in front of the service guy, however, they ask me to left the phone for checking, one day later, they confirmed that my phone is working fine no need to do anything, nothing to be replaced.
CM12 is already good enough, its speed and battery friendly....
I wish developers of CM12 would somehow fix the problem in future updates, as I knew some D855 user (but not much) also having the same issue.
Best regards,
D855Lover.