Related
Hey guys i have a big problem.
I my phone won't start at all. I was just to format my sd card with rom manager to use A2SD+. My phone is rooted and fresh flashed with the newest leedroid rom.
The format of the sd started, then screen turned black, i waited for 20 min after no change i tried to reboot, put out batterie etc. but no succes
So anyone have any idea what to do?
Tycorc said:
Hey guys i have a big problem.
I my phone won't start at all. I was just to format my sd card with rom manager to use A2SD+. My phone is rooted and fresh flashed with the newest leedroid rom.
The format of the sd started, then screen turned black, i waited for 20 min after no change i tried to reboot, put out batterie etc. but no succes
So anyone have any idea what to do?
Click to expand...
Click to collapse
i need more info...
1- you can enter into recovery menu?
2- which is your current clockworkmod version? be careful and don´t do partition sd with previous CWM than 3.0.2.6 you can brick your device
http://forum.xda-developers.com/archive/index.php/t-1043160.html
waiting for that you don´t did it!!
i can't enter the recovery menu.
I don't know witch version it was. i just used the the newes relases from the leedroid page, and haven't done any changes to the preset.
So propably don't look good for me
Just to rule it out, remove the SD card then try starting the phone (turn it off first even you have to pull battery out).
Tycorc said:
i can't enter the recovery menu.
I don't know witch version it was. i just used the the newes relases from the leedroid page, and haven't done any changes to the preset.
Click to expand...
Click to collapse
ooh dear... waiting for that your device don´t be bricked...
your device don´t boot since you was flashed a new rom? only this? or you wasn´t did anymore??
SERGI.3210 said:
ooh dear... waiting for that your device don´t be bricked...
your device don´t boot since you was flashed a new rom? only this? or you wasn´t did anymore??
Click to expand...
Click to collapse
it worked with the flashed rom, i probably think its bricked
Its dead after i tryed to format the sd card.
to bad that he recommeds using rom manager....
tried nearly everthing: without sd card, without sim, connected to charger with another battery....
Can you power on the phone?
When does the boot sequence stop?
Maybe this helps:
Performing a factory reset using phone buttons
If you cannot turn on your phone or access the phone settings, you can still perform a factory reset by using the buttons on the phone.
1. With the phone turned off, press and hold the VOLUME DOWN button, and then briefly press the POWER button.
2. Wait for the screen with the three Android images to appear, and then release the VOLUME DOWN button..
3. Press VOLUME DOWN to select CLEAR STORAGE, and then press POWER.
4. Press VOLUME UP to start the factory reset.
Click to expand...
Click to collapse
Source: HTC- Support- Side for HTC Desire
Sent from my HTC Desire using XDA App
MatDrOiD said:
Can you power on the phone?
When does the boot sequence stop?
Maybe this helps:
Manual from HTC- Support- Side for HTC Desire
Sent from my HTC Desire using XDA App
Click to expand...
Click to collapse
I can't power it on, i don't get any respond.
Tycorc said:
I can't power it on, i don't get any respond.
Click to expand...
Click to collapse
Manual could although work:
If you cannot turn on your phone
Click to expand...
Click to collapse
MatDrOiD said:
Can you power on the phone?
When does the boot sequence stop?
Maybe this helps:
Source: HTC- Support- Side for HTC Desire
Sent from my HTC Desire using XDA App
Click to expand...
Click to collapse
Thank you for the information, it would not have occurred to me...
MatDrOiD said:
Manual could although work:
Click to expand...
Click to collapse
yeah i mean also NOt in manual way...it really seemed its bricked.
thx 4 your help
SERGI.3210 said:
Thank you for the information, it would not have occurred to me...
Click to expand...
Click to collapse
Sarcasm? Sorry for question, i am new here ;-)
Sent from my HTC Desire using XDA App
MatDrOiD said:
Sarcasm? Sorry for question, i am new here ;-)
Sent from my HTC Desire using XDA App
Click to expand...
Click to collapse
No mate! only been grateful... its the true....
can be that my english is poor...
i was staid thinking about the problem exposed in this thread and was not occured to me that you was said....
in adition i pressed your thanks button for teaching myself slightly more
EDIT: sarcasm do not helps anyone... and i think that in XDA we are always learning (without exception)
SERGI.3210 said:
No mate! only been grateful... its the true....
can be that my english is poor...
i was staid thinking about the problem exposed in this thread and was not occured to me that you was said....
in adition i pressed your thanks button for teaching myself slightly more
EDIT: sarcasm do not helps anyone... and i think that in XDA we are always learning (without exception)
Click to expand...
Click to collapse
Allright, thanks.
And i agree upon: sarcasm helps nobody
Sent from my HTC Desire using XDA App
sry, i have to tell you that the clockworkmod recovery has formatted your nand-partition, what means that your phone is bricked.
as far as i remember there is no way to fix this.
you had to update your clockworkmod recovery before doing anything. you should´ve read the fat stickie in the android development section.
CWM had a bug which causes bricked phones, because it doesn't partition the sdcard, but the nand memory. this means hard brick.
sry bro.
EDIT: oh^^ just saw, someone posted a link already.
So what happened when you removed the SD card from the phone and tried turning the phone on? <<-- Ignore, I didn't see the bit where you said you'd tried it. Sorry.
Mr_JMM said:
So what happened when you removed the SD card from the phone and tried turning the phone on?
Click to expand...
Click to collapse
EI MATE!! we meet again.. LIKE THE ALL THE DAYS! LOLOL
"Always at the foot of the canion"
he said that tried it and nothing.. no results..
i think too that its a hard brick...
what are you thinking about?
sorry i´ve a poor english
Thanks Sergi, I didn't see that bit.
I agree, if you can't get to HBoot (hold down vol- and press power button) then it looks like it is bricked. But that would mean he used an older version of clockwork recovery and I don't know where it says to use an older version.
Summary: Bricked. Send away for repair. Just don't tell them what you were doing.
Can't he JTAG the unit and flash NAND that way?
How does HTC do it?
Mr_JMM said:
Thanks Sergi, I didn't see that bit.
I agree, if you can't get to HBoot (hold down vol- and press power button) then it looks like it is bricked. But that would mean he used an older version of clockwork recovery and I don't know where it says to use an older version.
Summary: Bricked. Send away for repair. Just don't tell them what you were doing.
Click to expand...
Click to collapse
yeah thats what i gone do. Send it to htc und just say it stopped working...
so I have a rooted Nitro, and I just installed CM9 RC2 (previously running RC1)
When I boot up, it gets stuck on the animation, which I know happens a lot
however, I can't get back into recovery to wipe and reflash
when I start my phone while holding Volume Down, it goes to the factory hard reset screen like it should, I press Power twice, but instead of booting into recovery, it restarts and tries to boot CM9
I don't really know what to do since I can't get into recovery
Is your battery low, by any chance? If it is, see if you can get it to boot into the charging mode by plugging in power while it's off.
Sent from my LG-P930 using Tapatalk 2
Malnilion said:
Is your battery low, by any chance? If it is, see if you can get it to boot into the charging mode by plugging in power while it's off.
Sent from my LG-P930 using Tapatalk 2
Click to expand...
Click to collapse
the battery was at around 90% when I flashed RC2 so it's probably still pretty high
it boots into the charging mode fine
keep trying!!!!!
\
1
!!!!!!!1
seriously. 100 times try. no ****.
scott0 said:
keep trying!!!!!
\
1
!!!!!!!1
seriously. 100 times try. no ****.
Click to expand...
Click to collapse
I've probably tried 15-20 times so far
I don't think it'll work
Oh gosh...this just scares me. Knowing my luck this will happen to me next. I mean my phone is working why should i break it lol
Edit #1: Just flashed it, its optimizing the apps so i guess im on the clear
Edit #2: Works well, but has its flaws, will flash back to RC1
atineiatte said:
I've probably tried 15-20 times so far
I don't think it'll work
Click to expand...
Click to collapse
I hope your can get it into download mode cause it's lookin like the un-brick process for you...
Sent from my LG-P930 using xda app-developers app
Hutch89 said:
I hope your can get it into download mode cause it's lookin like the un-brick process for you...
Sent from my LG-P930 using xda app-developers app
Click to expand...
Click to collapse
yeah, I can get it into download mode
is there any other way? I did that unbricking process once (because the previous owner updated the phone) and I would really rather not have to do it again
atineiatte said:
yeah, I can get it into download mode
is there any other way? I did that unbricking process once (because the previous owner updated the phone) and I would really rather not have to do it again
Click to expand...
Click to collapse
I'm not 100 percent positive it's the ONLY way, but it's definitely A way. And I feel your pain, it took 8 hours of trial and error to unbrick mine. (long, ****y story) you may be able to just flash the Korean kdz, root, install Rom manager to get cwm, and flash from there, skipping moving all the img files and adb stuff, that's what I did. If you do it that way flash honos ics leak first to get your baseband and stuff right though
Sent from my LG-P930 using xda app-developers app
atineiatte said:
so I have a rooted Nitro, and I just installed CM9 RC2 (previously running RC1)
When I boot up, it gets stuck on the animation, which I know happens a lot
however, I can't get back into recovery to wipe and reflash
when I start my phone while holding Volume Down, it goes to the factory hard reset screen like it should, I press Power twice, but instead of booting into recovery, it restarts and tries to boot CM9
I don't really know what to do since I can't get into recovery
Click to expand...
Click to collapse
Same here, try to restore LG ROM now, hope good luck!
looks like your gonna be the 1st to try the new unbricking guide!! :good: let's us know how it goes................................
unbricked on korean firmware
I forgot to rename the .kdz
EDIT- rooted on fourth try
Restore LG ROM Done! After restored, do wipe, now, go back to LG ROM.
just updating my thread
I have RC2 running on it now with no problems
general use feels a lot faster than RC1 so I'm pretty happy with it
quadrant score is also now slightly above the Atrix 4G, which makes me feel a bit better about upgrading from that (it broke)
however, when I'm going to the homescreen or leaving the homescreen, my homescreen with a black background pops up for a fraction of a second before doing whatever (don't know how to better describe it)
it's obviously just a bug and it doesn't really bother me, but I thought I would point it out
nice works, always good to see peeps get it done.
hey, could you link from here to the successful de-bricking guide that worked for you?
scott0 said:
nice works, always good to see peeps get it done.
hey, could you link from here to the successful de-bricking guide that worked for you?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1597488
a few notes:
I don't think you need any of the image files if you're just flashing CM9 or HO!NO! or something
when you download the .kdz file, you have to rename it to V10F_00.kdz or else it will not work because the name is too long (seriously, I spent hours on this)
when you flash the .kdz file, if it stops at 4%, and within 60 seconds it says something about a connection failure, it didn't work. if it stops at 4% but doesn't say anything, keep waiting and watch your phone's screen
the good ole machzelot debrick always works for me too!
one more question, might as well ask it in here
how do I get my 64gb microSD card working in CM9?
I know the card works and the phone can read it because it works fine when mounted in recovery, but when I put it in my phone, it just says it's damaged, and when I try to format it, it says it's being checked then says it's damaged again
atineiatte said:
http://forum.xda-developers.com/showthread.php?t=1597488
a few notes:
I don't think you need any of the image files if you're just flashing CM9 or HO!NO! or something
when you download the .kdz file, you have to rename it to V10F_00.kdz or else it will not work because the name is too long (seriously, I spent hours on this)
when you flash the .kdz file, if it stops at 4%, and within 60 seconds it says something about a connection failure, it didn't work. if it stops at 4% but doesn't say anything, keep waiting and watch your phone's screen
Click to expand...
Click to collapse
First I even posted but i'm having exactly the same problem
installed CM9, stuck on the blue guy at boot, no recovery mode.
please tell me the steps you followed, been searching to solve this for a while!
“I don't think you need any of the image files if you're just flashing CM9 or HO!NO! or something
when you download the .kdz file, you have to rename it to V10F_00.kdz or else it will not work because the name is too long (seriously, I spent hours on this)"
Me too I was pist when I finally figured out the bane of my existence for 4 hours was a simple name edit
Sent from my LG-P930 using xda app-developers app
I'm fairly a noob when it comes to rooting and whatnot, however i've learned quite a bit since i've started. I rooted nexus s with no hassel. My friend the other day gave me a LG Nitro HD, the phone boots shows the LG logo then goes to the Clockworkmod touch 5.8.2. I have tried installing roms on it, it will install the rom and run then when i try to reboot, the soft keys will flash for 2 mins before showing the LG logo and going back to the Clockworkmod again. Keep in mind there is nothing on the SD card besides the signed_HO!NO!_p930 i have tried other os's too. I don't know exactly what he did to his phone. Please help me out. Thanks a bunch guys :laugh:
luqman91 said:
I'm fairly a noob when it comes to rooting and whatnot, however i've learned quite a bit since i've started. I rooted nexus s with no hassel. My friend the other day gave me a LG Nitro HD, the phone boots shows the LG logo then goes to the Clockworkmod touch 5.8.2. I have tried installing roms on it, it will install the rom and run then when i try to reboot, the soft keys will flash for 2 mins before showing the LG logo and going back to the Clockworkmod again. Keep in mind there is nothing on the SD card besides the signed_HO!NO!_p930 i have tried other os's too. I don't know exactly what he did to his phone. Please help me out. Thanks a bunch guys :laugh:
Click to expand...
Click to collapse
I am having the exact same issue here for two days now... I did a full back up prior to flashing yet still nothing and no matter what ROM I try I wind up back in CWM....
I am going to stop bye a shop were I know a guy that does rooting and such and take the phone to see...Will keep you posted from this side anxious to read what others may say.
Try following machzelets or mattman86's unbricking guide. Well thats if you can get into download mode.
Sent from my LG-P930 using xda premium
rani9990 said:
Try following machzelets or mattman86's unbricking guide. Well thats if you can get into download mode.
Sent from my LG-P930 using xda premium
Click to expand...
Click to collapse
I know I cannot get into download mode, Will be interested to see if Lugman can or not ... So unbricking is not an option at this point for me. Tried that yesterday also.
Lugman please post any progress sounds though we are in the same river of CWM... Why the HOX is so easy compared to this ....
Try charging it then do a battery pull then plug in the USB while holding the volume update. This should bring up a screen saying download mode. Then unbrick from there.
Sent from my LG-P930 using xda premium
rani9990 said:
Try charging it then do a battery pull then plug in the USB while holding the volume update. This should bring up a screen saying download mode. Then unbrick from there.
Sent from my LG-P930 using xda premium
Click to expand...
Click to collapse
Yes that worked that specific method, its in download mode however my laptop says that the device driver software was not successfully installed. I dunno what to do after this.
luqman91 said:
Yes that worked that specific method, its in download mode however my laptop says that the device driver software was not successfully installed. I dunno what to do after this.
Click to expand...
Click to collapse
You can go here:
http://www.lg.com/us/support-mobile/lg-P930#software
Download the drivers and have a blast... I dropped mine off at the shop to see if the guy can do something... He mentioned that he has seen some of this going on with CWM sticking he tried some methods and a couple different ROMS and also nothing. So I left it hoping I get the call that all is well in the AM.
Anyway GOOD LUCK ..
Thanks alot man, am gonna try all this out and see how it all works. I appreciate your help. am gonna post here what the progress is and whatnot. so check back!
luqman91 said:
Thanks alot man, am gonna try all this out and see how it all works. I appreciate your help. am gonna post here what the progress is and whatnot. so check back!
Click to expand...
Click to collapse
Great let us know... I have mine at the shop the guy is using the inbricking guide from here to do some magic (I hope) thought I would have the phone back today but told maybe tomorrow as it takes a long time to do the process...
Not sure I ever want to use CMW first will have to read up more on it....
So i rooted, freegee my phone. Installed CM 10 everything was working great. Made a back up of stock through through twrp before i flashed cm10. After a couple of hours i restarted my phone and now it wont boot. The lg screen pops up and then just goes blank the lcd still on. I cant boot into recovery, download mode, factory wipe or anything. Same LG splash screen pops it and then screen goes blank. Someone please help me! i have literally had my optimus g for 2 days.
PoseyBAH said:
So i rooted, freegee my phone. Installed CM 10 everything was working great. Made a back up of stock through through twrp before i flashed cm10. After a couple of hours i restarted my phone and now it wont boot. The lg screen pops up and then just goes blank the lcd still on. I cant boot into recovery, download mode, factory wipe or anything. Same LG splash screen pops it and then screen goes blank. Someone please help me! i have literally had my optimus g for 2 days.
Click to expand...
Click to collapse
Hold the power button down for about 10 secs, keep doing it until you don't see the lg screen pop up then you know its off, then enter download mode and flash stock again using the tools in the general section. I done something similar, I have been on stock for over a week and couldn't be happier, I'm not taking any more chances with this brilliant phone!!
Sent from my LG-E973 using xda premium
Without usb cable plugged in, i cant enter boot or anything else, phone immediately restarts.
Tim4 said:
Without usb cable plugged in, i cant enter boot or anything else, phone immediately restarts.
Click to expand...
Click to collapse
Like mark dexter said. You need to hold the power button down for at least 10 seconds until it turns off. From what I've read it's soft bricked 4 or 5 phones already. The exact same thing happened to me. I am back on stock rom and not taking any more changes.
Sent from my LG-E973 using xda app-developers app
gentledroid17 said:
Like mark dexter said. You need to hold the power button down for at least 10 seconds until it turns off. I believe that cm 10 rom is bad news. From what I've read it's soft bricked 4 or 5 phones already. The exact same thing happened to me. I am back on stock rom and not taking any more changes.
Sent from my LG-E973 using xda app-developers app
Click to expand...
Click to collapse
Is your E973 in full english ? or u have korean stuff in it ?
iEthos said:
Is your E973 in full english ? or u have korean stuff in it ?
Click to expand...
Click to collapse
I downloaded the appropriate kdz file for my phone and it went back to original stock.
Sent from my LG-E973 using xda app-developers app
Nothing wrong with cm ROM. Don't AME user error on a ROM.
Sent from my Optimus G using xda premium
Been searching forever for the kdz in english. Ressurected with the Korean version on my phone now, but no radio. Where can I find the English kdz? thanks all
stubull05 said:
Been searching forever for the kdz in english. Ressurected with the Korean version on my phone now, but no radio. Where can I find the English kdz? thanks all
Click to expand...
Click to collapse
I guess you didnt look the warning on the korean kdz ? Welcome to the land of no more radio.
WARNING: If you don't have a Korean Phone and you flash
these images you might risk bricking your modem / radio meaning if
you flash back to your original stock you wont have working radio.
At least that is from the leaked rom, maybe the official one dont break your radio.
I Guess that reading a bit more was hard. This is some firmware that would have fixed your phone :
http://forum.xda-developers.com/showthread.php?t=2036404
And here is the kdz you were looking for :
http://forum.xda-developers.com/showthread.php?t=2010624
LOL, this is actually what I followed to bring the phone back. An update showed up on my phone 2 days ago and it wouldn't start the next day (virus? iono). Thanks for your help though, guess I should have looked harder.
Steps
Oops. Posted in the wrong thread.
This might not work for you as it did not work for me but it is the only way I have been able to pass the low battery message so it might work for some. I get a connection problem after step 3
Step 1.
Download tool and LG drivers (if you don't have them) from here and here and install them normally
Step 2.
Remove battery and note down your device model and serial number. Boot phone in to download mode by switching phone off or pulling battery if soft bricked, then hold down both of the volume keys and plug in the USB data cable
Step 3.
Run LG Mobile Tool and wait for the software to tell you it recognises the handset as either being the latest software or a new update is available. Unplug the handset but keep it in download mode then in LG Mobile Tools click on options then update recovery. It will now prompt you to enter your handset details, fill out the top 2 boxes and click ok. You will soon be prompted by a message asking you to plug your handset in, plug it in then press retry. Wait EXACTLY 5 seconds (count 1 Mississippi, 2 Mississippi, 3 Mississippi, 4 Mississippi, 5 Mississippi) then unplug the phone as quickly as possible! Very important, it might take a few tries to get it so just alter the speed at which you are saying Mississippi lol!. If you get the same error message about battery too low then you have failed and need to try it again. Once you have succeeded you can do either of the 2 things below:
3a. Plug phone back in immediately and wait for the file to download and flash (recommended) (I am currently trying this and will report back as soon as I can)
3b. If you are soft bricked and scared you have limited battery then don't plug it back in, pull your battery out and let the program run and it will do everything including download the required software for flashing. When the software is almost completely downloaded, boot back in to download mode and let the downloaded software flash to your phone. (might have an error at software installation this method. I couldn't get it to work I think due to the phone being disconnected for so long.)
Step 4.
MAKE SURE YOU DO A FACTORY RESET STRAIGHT AFTER THE SOFTWARE HAS INSTALLED
Step 5. (Optional)
Download the older version of FreeGee from here if you are still a bit unsure if the latest version will soft brick your handset again.
I have managed to use LG Flash Tools now, even after being affected. I would not advise trying this though, as it was an accident for me. I had the back cover off while flashing a custom rom with CWM. After the rom file was installed, I rebooted my phone from CWM. As the phone was rebooting (was on the rom boot animation) the battery fell out. After I put the battery back in the phone would load to the rom boot animation, but it would freeze on this screen and then reboot and do the same thing over and over (bootloop to animation) - I then tried to factory reset and flash the rom again, with the same thing happening again) - I then went in to restore my phone using a backup through CWM. After the restoration, then phone would still hang at boot animation and then bootloop. I retried restoring and flashing multiple roms and re root the phone with a saved zip file on my phone. None of this was working. I decided to try to use LG Flast Tools again, only this time it actually passed the low battery warning. The funny thing is, I have tried thousands of times even at 100% battery level and lower (when there was nothing wrong with my phone at all) and it has never worked. This time it did (even though I had 66% battery) and still works now, as I just tried it again.
I've tried this method but unfortunately, the update stoped..
i passed through step 3a but when installing the software, around 80%, the lg mobile support tool suddenly disappear.
i'm trying it again for the second time, i'll update after my attempt.
thanks.
reymartsantos11 said:
I've tried this method but unfortunately, the update stoped..
i passed through step 3a but when installing the software, around 80%, the lg mobile support tool suddenly disappear.
i'm trying it again for the second time, i'll update after my attempt.
thanks.
Click to expand...
Click to collapse
- It's so frustrating that it gets so close, I am going to try 3a now and see how I go. There must be a way
3a also didn't work for me oh well, back to the drawing board
uppon2 said:
- It's so frustrating that it gets so close, I am going to try 3a now and see how I go. There must be a way
Click to expand...
Click to collapse
tried it for the thrid time, still no luck. i'll wait for your update.. thanks
Same here..so damn frustrating..
Sent from my GT-I9500 using xda app-developers app
---------- Post added at 10:59 AM ---------- Previous post was at 10:58 AM ----------
Unplugging and connecting when asks for retry helps in bypassing the battery error.still.its just a visual gimmick.
Sent from my GT-I9500 using xda app-developers app
I got in such situation twice... bricked device and getting battery level error (3) even when i had my battery at 100%. Found out after several flash attempts that this problem was solved by flashing the oldest official kdz i could find (v10A). :silly:
Isamu_Dyson said:
I got in such situation twice... bricked device and getting battery level error (3) even when i had my battery at 100%. Found out after several flash attempts that this problem was solved by flashing the oldest official kdz i could find (v10A). :silly:
Click to expand...
Click to collapse
I might give that a shot.
HONESTLY WHY! I am starting to get so frustrated that nobody can figure this out! Surely there is somebody out there that can someone reverse the damage that FreeGee caused by way of ADB commands? I just wish I knew what the hell I was looking for
OK guys.. After exhausting all known tricks but failure I just walked into LG service centre andgot stock ROM installed. It took just ten minute for them to install.
I just though given an opportunity, I will steal their laptop n take it home..hahhha..
Anyway as I of now I am jut **** scared to o anything with the phone. I just rooted it and playing around with DPI settings using closed framework.
Sent from my LG-E988 using XDA Premium HD app
vnsriniwas said:
OK guys.. After exhausting all known tricks but failure I just walked into LG service centre andgot stock ROM installed. It took just ten minute for them to install.
I just though given an opportunity, I will steal their laptop n take it home..hahhha..
Anyway as I of now I am jut **** scared to o anything with the phone. I just rooted it and playing around with DPI settings using closed framework.
Sent from my LG-E988 using XDA Premium HD app
Click to expand...
Click to collapse
What exactly did they do? Did you see any of the software? It's not that easy for me as this phone was never released in my country.
uppon2 said:
What exactly did they do? Did you see any of the software? It's not that easy for me as this phone was never released in my country.
Click to expand...
Click to collapse
I could not see what they did. But I am damn sure he didn't do anything like using button combination to get into recovery or download mode etc. I saw him remove the battery n then reinstate then just plugged in the USB cable!
Sent from my LG-E988 using XDA Premium HD app
Isamu_Dyson said:
I got in such situation twice... bricked device and getting battery level error (3) even when i had my battery at 100%. Found out after several flash attempts that this problem was solved by flashing the oldest official kdz i could find (v10A). :silly:
Click to expand...
Click to collapse
I deal with this situation 3 time...last time little scary with only boot to cwm ( fix with flash twrp hack by madmack and install rom )...never get same sollution to by pass low bat warning...
I think we just have to uninstall and reinstall all LG driver..restart..and keep trying with 100% batt..
May be LG decide flash or not when we connect via Lg mobile tool via internet..
Because once i have succed flash with only 20 % battery...last time i get low batt warning with 60% batt...
Once you get low batt warning it keep rejecting flash even with 100% battery..
Lol never give up trying is best sollution
Sent from my LG-E980 using xda app-developers app
Isamu_Dyson said:
I got in such situation twice... bricked device and getting battery level error (3) even when i had my battery at 100%. Found out after several flash attempts that this problem was solved by flashing the oldest official kdz i could find (v10A). :silly:
Click to expand...
Click to collapse
I think we have a hint here!
This morning when service centre guys flashed new ROM I got v10a!!
The moment I reached home I got a notification saying update available. Then. I got v10e !
Sent from my LG-E988 using XDA Premium HD app
vnsriniwas said:
I think we have a hint here!
This morning when service centre guys flashed new ROM I got v10a!!
The moment I reached home I got a notification saying update available. Then. I got v10e !
Sent from my LG-E988 using XDA Premium HD app
Click to expand...
Click to collapse
maybe yes ... maybe not ... since my last flash failed 10a and succeeded with 10e firmware...
Maybe different way to flash...
still a mystery
vnsriniwas said:
OK guys.. After exhausting all known tricks but failure I just walked into LG service centre andgot stock ROM installed. It took just ten minute for them to install.
I just though given an opportunity, I will steal their laptop n take it home..hahhha..
Anyway as I of now I am jut **** scared to o anything with the phone. I just rooted it and playing around with DPI settings using closed framework.
Sent from my LG-E988 using XDA Premium HD app
Click to expand...
Click to collapse
sorry for my noob question.
you just walked into LG service centre? they didn't question you about how your phone got into that situation?
i'm afraid that lg might ignore my phone because i rooted and attempt to disable the scurity through freegee..
They have asked me. I just said I was trying to do factory reset n it got struck. But I am not sure if he completely beloved me. It all boils down to how friendly that guy in the counter is. After all ,for them, its just a 10 main job. No parts or labour involved. Just pushing some files.
So just go ahead n try. My phone is also rooted n flashed freegee. But I got the service.
Sent from my LG-E988 using XDA Premium HD app
Worked for me
Waited 5 secs unpluged, LG Support tool shot up to 100% and the download started! Thanks man pro tip
--->Droid DNA FTW<------
Hi guys,
I'm facing the same problem here but with a G Pad. Can't pget past the low battery error.
I figured a way to make the mobile tool download the files but when it comes to flashing it I get the same error again.
How did you flash the file after downloading it?
Any help will be really appreciated.
Allah5580 said:
Waited 5 secs unpluged, LG Support tool shot up to 100% and the download started! Thanks man pro tip
--->Droid DNA FTW<------
Click to expand...
Click to collapse
Bam ... i got it! :laugh:
For all with the low battery error, here is my solution (on Win8 machine):
1. Flashed E988 V5 rom with cwm
I think its editional, because i got low battery error error after i tried to flashed stock rom.
2. Flashed stock at&t rom V10g
3. Flashed E980H Panama ROM V10a
And it works, i dont get low battery error, even with ~65% battery... Maybe a try for all with same problem? :fingers-crossed:
elvitas said:
Bam ... i got it! :laugh:
For all with the low battery error, here is my solution (on Win8 machine):
1. Flashed E988 V5 rom with cwm
I think its editional, because i got low battery error error after i tried to flashed stock rom.
2. Flashed stock at&t rom V10g
3. Flashed E980H Panama ROM V10a
And it works, i dont get low battery error, even with ~65% battery... Maybe a try for all with same problem? :fingers-crossed:
Click to expand...
Click to collapse
how can i flash v5 with cwm? how can i boot to cwm?