Hi, I hate to ask so much of you people but it seems that rwiclo is down and I really need a rooted one click file. I really don't mind if it's ICS or JB, I just borked my phone up a wee bit and lost my ability to boot and go into recovery, so the only method I know of to fix it is to install a one click. So if someone would be so kind as to spare me one I would greatly appreciate it.
NavalFluff said:
Hi, I hate to ask so much of you people but it seems that rwiclo is down and I really need a rooted one click file. I really don't mind if it's ICS or JB, I just borked my phone up a wee bit and lost my ability to boot and go into recovery, so the only method I know of to fix it is to install a one click. So if someone would be so kind as to spare me one I would greatly appreciate it.
Click to expand...
Click to collapse
checked the site and its down alright
http://www.sxtpdevelopers.com/showthread.php?t=166
just make sure you get the full restore so you can start fresh, this will fix it and it will also complety reset the phone
As far as I'm aware that thread links to the Android Repository, and none of the download links are working. Someone about moving hosts so I guess I'm just going to have to wait :/
The repository is up and running.
Sent from my SPH-D710 using xda premium
Just noticed, thanks guys
I rooted my GS4 yesterday and had no issues at all until i tried to flash a MOD to obtain wireless hotspot, but what i didnt notice was the MOD was for a Sprint version GS4. I know know if thats exactly what made my phone brick but im pretty positive because it was during the reboot that the phone got stuck on the TMO screen and apparently remaining soft-bricked. I spent the rest of the night and all of today reading and researching how to fix it myself before coming here to ask for help, so please bare with me.
I have already attempted to flash the official stock firmware using Odin, but it displays an error everytime saying it failed and something about AUTH. Sorry if im sounding vague, i am on a back up phone to use the internet and forgot to right down the exact message.. Anywho, i tried wiping everything and redoing the process and i even tried to flash the appropiate PIT file that i found but it still displays an error and says failed because of some AUTH or SEC problem.
Ive been at this diligently for almost 12 hours. My brain is filled with all these suggestions and methods that i have tried to use to restore my phone back to factory, but none of them have worked. I can still get into recovery and all that, so im assuming that there is still good chance i could fix the problem?
Also i am starting to get myself more and more confused about whether the firmware i downloaded is the right one i need for my phone, it seemed so at first but now i see theres TONS of region codes that can determine the firmware version?
Sorry if im all over the place, but i just dont know which step to take next..
I appreciate any help that is given, and im even willing to pay (some) bucks or maybe even (btc) for someone to walk me through what i need to do or what im doing wrong.
Thanks in Advance
Have you followed every single thing in the return to stock thread? Including updating your drivers, using the USB cable that came with your phone, running Odin as admin, etc?
Toleraen said:
Have you followed every single thing in the return to stock thread? Including updating your drivers, using the USB cable that came with your phone, running Odin as admin, etc?
Click to expand...
Click to collapse
No i havent tried that threads strategy, although i have done the same exact steps but only difference i see is that the firmware file name is:
M919UVUAMDL
While the one i was trying to use earlier was:
I9505XXUAMDM
This is where im getting very confused because i cant find a cut and dry way of knowing which firmware is the correct one..
koolbreez12 said:
No i havent tried that threads strategy, although i have done the same exact steps but only difference i see is that the firmware file name is:
M919UVUAMDL
While the one i was trying to use earlier was:
I9505XXUAMDM
This is where im getting very confused because i cant find a cut and dry way of knowing which firmware is the correct one..
Click to expand...
Click to collapse
You do have the T-Mobile SGS4, correct? Any files with I9505 in the name are for the international version, which is what you flashed (not the right file). All of ours will mention SGH-M919, M919, or jfltetmo in the file name. Pull the one in the thread I linked above and push that.
Crossing your fingers while doing so couldn't hurt...
Edit: I'd recommend using the "Download UVUAMDL Official TAR" in that thread as well, not the "stock tar (original)", since the MDL is official.
Toleraen said:
You do have the T-Mobile SGS4, correct? Any files with I9505 in the name are for the international version, which is what you flashed (not the right file). All of ours will mention SGH-M919, M919, or jfltetmo in the file name. Pull the one in the thread I linked above and push that.
Crossing your fingers while doing so couldn't hurt...
Edit: I'd recommend using the "Download UVUAMDL Official TAR" in that thread as well, not the "stock tar (original)", since the MDL is official.
Click to expand...
Click to collapse
Thanks so much, i feel stupid for not realizing the difference between the two haha. Im d/l the firmware from the thread you referenced as we speak so i definitely will keep my fingers crossed and let you know how it turns out!
Thanks again. Im not sure how to give a thanks on here or credit for you help but your help is definitely appreciated.
error post
If you can get into download mode i would suggest flashing stock with that then rerooting that way the program downloads all of the nessacary stuff on its own.
koolbreez12 said:
Thanks so much, i feel stupid for not realizing the difference between the two haha. Im d/l the firmware from the thread you referenced as we speak so i definitely will keep my fingers crossed and let you know how it turns out!
Thanks again. Im not sure how to give a thanks on here or credit for you help but your help is definitely appreciated.
Click to expand...
Click to collapse
Welcome!
Sent from my SGH-M919 using xda premium
I Got this phone in the mail off Ebay today. And within the first hour I updated it to 4.3 and rooted it. And now I'm getting another OTA update notification. I'm not new to rooting and stuff but I am new to Samsung. So I'm a little worried if I should do the update or not. I don't wanna get stuck in a bootloop or anything.
I'm rooted
I'm running 4.3
I have Clockwork flashed
Rom is stock
All I'd like to know is if I am safe to update? I heard you are and then I've heard you're not.
not sure but if you can unroot you can allways re root in 4.4
If no one else has done so yet, ive got a modded ota that should allow you to flash via cwm or twrp, and should preserve root.
Its uploading now.
DocHoliday77 said:
If no one else has done so yet, ive got a modded ota that should allow you to flash via cwm or twrp, and should preserve root.
Its uploading now.
Click to expand...
Click to collapse
Alright thanks! let me know when it's up. And are you from Huntsville Alabama too?
Ok, here is the modded OTA!
It should allow you to flash via TWRP or CWM recoveries, and it should also preserve root!
You will still need to be full stock for it to work as it still will go through its checks before flashing. It is not recommended to remove these checks because it could cause problems when patching files. Especially if the files being patched have been modded.
THIS IS UNTESTED! I do not have a working device at the moment, (dont have the I747 anyway), so I am unable to test on my own before releasing. I do not foresee any problems, but there just is no way to be positive until its been tried. If there is an issue, it should still just fail before the flash like it always has been supposed to do.
Please post back ASAP after trying this out so we know if it is working or not.
Modded_OTA_UCUEMJB-UCUFNE4.zip
Hope this proves helpful for some of you!
Doc
DocHoliday77 said:
Ok, here is the modded OTA!
It should allow you to flash via TWRP or CWM recoveries, and it should also preserve root!
You will still need to be full stock for it to work as it still will go through its checks before flashing. It is not recommended to remove these checks because it could cause problems when patching files. Especially if the files being patched have been modded.
THIS IS UNTESTED! I do not have a working device at the moment, (dont have the I747 anyway), so I am unable to test on my own before releasing. I do not foresee any problems, but there just is no way to be positive until its been tried. If there is an issue, it should still just fail before the flash like it always has been supposed to do.
Please post back ASAP after trying this out so we know if it is working or not.
Modded_OTA_UCUEMJB-UCUFNE4.zip
Hope this proves helpful for some of you!
Doc
Click to expand...
Click to collapse
I would test it but I just can't. I'm pretty sure it wouldn't break anything. But I haven't had this phone for 24 hours yet, I just bought it and it's the only one I got. I even paid my bill today too. And I'm looking for another job and you have to have a phone for that lol. Post it up on the forum and let someone who knows more than I do test it because I'm just gonna have to wuss out on this one. I appreciate it though!:good::good:
No sweat. I completely understand! I may go ahead and make a thread for it, but was hoping to verify it works first. Ill post it in the other ota thread for now.
And yes, I am close to Huntsville. Good luck on your job hunt!
Questions and Help issues belong in Q&A and Help section..thanks
Thread moved
FNSM
Hey guys, I am new to this forum here but before anyone flames me, I did read the faqs and tried to uninstall from there but it did not work out. Apparently I dont think you can get rid of CM11 since you cant install any stock firmware older than it? Before I installed CM11, I was on jellybean. I had tried to find the latest kitkat update for the s3 (att) and there is no file of it found online (tried sammobile). When I tried flashing an older firmware with ODIN, it just fails at "NAND!". Any help would be appreciated. I am COMPELETELY new at this so specific directions would be appreciated!
I really do love cyanogenmod but there are simply too many glitches and not enough guidance on how to fix em. I am, however, currently using it on my HP touchpad, if anyone remembers what it is . Maybe ill go back to using it in the future.
thanks!
Your rom (cm) has nothing to do with what firmware you can or cannot flash. Once you have updated to 4.3 firmware or newer, you can only flash the same or newer firmware in odin from now on. (Regardless of firmware you can still flash older roms btw)
Using terminal emulator, enter this to find your current firmware build:
getprop ro.bootloader
I suspect you are on a 4.3 build. So odin flash that same firmware. You can find it in these forums. After that you can get the ota to update fully to kk.
There are other methods of updating. Just check the General section. (enewman17 has a few threads that will help)
Note: anytime you go between touchwiz and non touchwiz roms, you will have to factory reset or it'll hang at boot.
DocHoliday77 said:
Your rom (cm) has nothing to do with what firmware you can or cannot flash. Once you have updated to 4.3 firmware or newer, you can only flash the same or newer firmware in odin from now on. (Regardless of firmware you can still flash older roms btw)
Using terminal emulator, enter this to find your current firmware build:
getprop ro.bootloader
I suspect you are on a 4.3 build. So odin flash that same firmware. You can find it in these forums. After that you can get the ota to update fully to kk.
There are other methods of updating. Just check the General section. (enewman17 has a few threads that will help)
Note: anytime you go between touchwiz and non touchwiz roms, you will have to factory reset or it'll hang at boot.
Click to expand...
Click to collapse
..
I am on "I747UCUEMJB"
and i am not sure what build i am on but according to my "build number"this is what it says: "cm_d2att-userbug 4.4.2 KOT49H"
The main issue is, I cannot find 4.3 update anywhere on the internet
The MJB is your current firmware/bootloader build/version.
The build number displayed in settings only represents the rom, which is often different, and doesnt really matter to much.
From this post/thread
http://forum.xda-developers.com/showthread.php?p=52341560
Direct link to MJB firmware
http://www.androidfilehost.com/?fid=23329332407590581
DocHoliday77 said:
The MJB is your current firmware/bootloader build/version.
The build number displayed in settings only represents the rom, which is often different, and doesnt really matter to much.
From this post/thread
http://forum.xda-developers.com/showthread.php?p=52341560
Direct link to MJB firmware
http://www.androidfilehost.com/?fid=23329332407590581
Click to expand...
Click to collapse
i have no idea what MJB means (i google'd it) and i just found out what my bootloader version is via download mode (its at the very bottom) and i have version 2.0?
ok downloading the giant file now. will report details. just follow instructions in the first link?
[sorry, like i said, im a noob so i really apologize for the lack of terms here]
MJB is just short for I747UCUEMJB. Sorry if I confused you. And the S/W revision being 2.0 is what Odin uses to know what firmware it is allowed to flash. In this case 2.0 tells odin it can flash the MJB firmware, or anything newer.
And yes, follow the instructions he posted and you should be fine.
Oh, and if you did not run the getprop command I posted before, please do so before flashing....just to be on the safe side. If it returns I747UCUEMJB, you are good to go. If it returns anything else, let me know before flashing.
DocHoliday77 said:
MJB is just short for I747UCUEMJB. Sorry if I confused you. And the S/W revision being 2.0 is what Odin uses to know what firmware it is allowed to flash. In this case 2.0 tells odin it can flash the MJB firmware, or anything newer.
And yes, follow the instructions he posted and you should be fine.
Oh, and if you did not run the getprop command I posted before, please do so before flashing....just to be on the safe side. If it returns I747UCUEMJB, you are good to go. If it returns anything else, let me know before flashing.
Click to expand...
Click to collapse
Cool! Got it. I think that was my main problem. I could only find 4.0 (or 4.1) and have been trying to use that on ODIN. Perhaps that was the main issue....
Oh already ran it and got "I747UCUEMJB", sorry if didnt say it properly.
Really appreciate the help! Ive at this for days and no solutions. Sometimes the hacking/custom firmware isnt for everybody
Ill update what happens. Download is taking forever.
EDIT: BTW, for the first link, which poster am I gonna have to follow? im assuming "garbage guy"?
I though you did run the command already, but just wanted to be certain is all. For some reason AT&T stopped releasing their firmware, which has been causing all kinds of problems for people.
Anyway, it sounds like you are good to go! Good luck!
Oh, and if the firmware you're downloading is a .zip or .7z file, make sure you extract it first. Odin only flashes .tar and .tar.md5 files.
DocHoliday77 said:
I though you did run the command already, but just wanted to be certain is all. For some reason AT&T stopped releasing their firmware, which has been causing all kinds of problems for people.
Anyway, it sounds like you are good to go! Good luck!
Oh, and if the firmware you're downloading is a .zip or .7z file, make sure you extract it first. Odin only flashes .tar and .tar.md5 files.
Click to expand...
Click to collapse
Thank you so much! It finally worked! I got the reset notification and I am now back on JB
Thank you! should I take any more steps to ensure I made a clean installation or am I good after flashing it?
david12795 said:
Thank you so much! It finally worked! I got the reset notification and I am now back on JB
Thank you! should I take any more steps to ensure I made a clean installation or am I good after flashing it?
Click to expand...
Click to collapse
Weird, I went straight to update phone and it said my phone is up to date? I thought the official 4.4 update came out for the S3?
david12795 said:
Thank you so much! It finally worked! I got the reset notification and I am now back on JB
Thank you! should I take any more steps to ensure I made a clean installation or am I good after flashing it?
Click to expand...
Click to collapse
Awesome!
really glad to hear that! The only thing I can think of thst you might want to do next is backing up your nv data. The following is a copy/past from a post I made a few min ago... root is required to fo this btw, just so you know.
(Since you are looking to update though, I recommend waiting till you have updated before rooting and running this backup)
It's a super simple procedure and will create an on device backup of your nv data. The backup will be stored on a couple of partitions we never touch, not even with firmware flashes. This essentially makes it a permanent backup. The cool thing about it is every time you reboot, the system checks for any corruption, and if detected, it will automatically restore from this backup. So if it were to ever happen, you probably wouldn't ever even notice it!
Install the Terminal Emulator from the play store. Open and enter this:
su
reboot nvbackup
Thats it! Device will reboot and create your backup. This should prevent you from ever suffering from a lost IMEI!
david12795 said:
Weird, I went straight to update phone and it said my phone is up to date? I thought the official 4.4 update came out for the S3?
Click to expand...
Click to collapse
That has been released, but OTA's are generally rolled out in stages over several weeks. Usually done by region. So it msy not have started in your area just yet.
Two alternatives you can try though, install kies on your computer and update through that. Or there are a couple if threads in the General section that provide the ota for download.
Enewman17 has a few threads helping folks to update so I recommend checking them out as well.
Ive heard that some people have gone to best buy and they were able to initiate the update there. I dont know much more about this though.
DocHoliday77 said:
Awesome!
really glad to hear that! The only thing I can think of thst you might want to do next is backing up your nv data. The following is a copy/past from a post I made a few min ago... root is required to fo this btw, just so you know.
(Since you are looking to update though, I recommend waiting till you have updated before rooting and running this backup)
It's a super simple procedure and will create an on device backup of your nv data. The backup will be stored on a couple of partitions we never touch, not even with firmware flashes. This essentially makes it a permanent backup. The cool thing about it is every time you reboot, the system checks for any corruption, and if detected, it will automatically restore from this backup. So if it were to ever happen, you probably wouldn't ever even notice it!
Install the Terminal Emulator from the play store. Open and enter this:
su
reboot nvbackup
Thats it! Device will reboot and create your backup. This should prevent you from ever suffering from a lost IMEI!
Click to expand...
Click to collapse
Thank you! I will look into this. I just figured for some reason...I would have some data left from cyanogenmod, if that makes sense. In other words, i want my phone to be as fresh as possible. I only ask this because when I had CM, i accidentally made a backup of it through rom manager (or clockwork) and I am not sure if its in my partition somewhere.
That has been released, but OTA's are generally rolled out in stages over several weeks. Usually done by region. So it msy not have started in your area just yet.
Two alternatives you can try though, install kies on your computer and update through that. Or there are a couple if threads in the General section that provide the ota for download.
Enewman17 has a few threads helping folks to update so I recommend checking them out as well.
Ive heard that some people have gone to best buy and they were able to initiate the update there. I dont know much more about this though.
Click to expand...
Click to collapse
TIL that OTA arent as fast. Ill download KIES and give it a try.
Just installed KIES and it said my phone has the latest firmware?
david12795 said:
Thank you! I will look into this. I just figured for some reason...I would have some data left from cyanogenmod, if that makes sense. In other words, i want my phone to be as fresh as possible. I only ask this because when I had CM, i accidentally made a backup of it through rom manager (or clockwork) and I am not sure if its in my partition somewhere.
TIL that OTA arent as fast. Ill download KIES and give it a try.
Click to expand...
Click to collapse
Factory resetting with stock recovery installed wipes all data except the external sdcard. I am so sorry I should've mentioned this before. I was thinking you had already done one at some point and didn't have anything left to worry about. Still, I should have asked and I do apologize for that. Hopefully if it was really important it was saved to the external sdcard....
david12795 said:
Just installed KIES and it said my phone has the latest firmware?
Click to expand...
Click to collapse
Ok, I wasn't sure about that. I personally never need or use kies so I didn't know if it was tied to the staged rollouts. It would appear that it is though.
Give me a few min and ill post links to the threads where you can download the ota or update via a different method.
---------- Post added at 03:56 AM ---------- Previous post was at 03:40 AM ----------
UCUEMJB to UCUFNE4 firmware update - thread by enewman17
http://forum.xda-developers.com/showthread.php?t=2808654.
How to update SGH-I747 yo UCUFNE4_4.4.2 - thread by enewman17
http://forum.xda-developers.com/showthread.php?t=2789917
[Download] AT&T Kitkat OTA file - thread by bkong
http://forum.xda-developers.com/showthread.php?t=2788012
I suggest trying the third one by bkong first. He posted a pure OTA file you can try to update with.
The first option is a recovery flashable firmware, but does not include the /system (ROM) portion. To fully update using this you'll flash the firmware per his instructions and then go to his development thread for the stock rom. It is here: http://forum.xda-developers.com/showthread.php?t=2788357
The second option is the OTA file, but it has been slightly modified to skip certain file checks. If the original OTA doesnt work, theres a good chance this will. (Since you are full stock now either one should flash without issue).
Hope those help! I recommend doing a bit of reading about each one (at least the OP and last few pages) and start with whichever you are most comfortable with.
Or, you could always use that most valuable tool, patience, and wait for the OTA to roll out for your area.
Good luck!
DocHoliday77 said:
Factory resetting with stock recovery installed wipes all data except the external sdcard. I am so sorry I should've mentioned this before. I was thinking you had already done one at some point and didn't have anything left to worry about. Still, I should have asked and I do apologize for that. Hopefully if it was really important it was saved to the external sdcard....
Ok, I wasn't sure about that. I personally never need or use kies so I didn't know if it was tied to the staged rollouts. It would appear that it is though.
Give me a few min and ill post links to the threads where you can download the ota or update via a different method.
---------- Post added at 03:56 AM ---------- Previous post was at 03:40 AM ----------
UCUEMJB to UCUFNE4 firmware update - thread by enewman17
http://forum.xda-developers.com/showthread.php?t=2808654.
How to update SGH-I747 yo UCUFNE4_4.4.2 - thread by enewman17
http://forum.xda-developers.com/showthread.php?t=2789917
[Download] AT&T Kitkat OTA file - thread by bkong
http://forum.xda-developers.com/showthread.php?t=2788012
I suggest trying the third one by bkong first. He posted a pure OTA file you can try to update with.
The first option is a recovery flashable firmware, but does not include the /system (ROM) portion. To fully update using this you'll flash the firmware per his instructions and then go to his development thread for the stock rom. It is here: http://forum.xda-developers.com/showthread.php?t=2788357
The second option is the OTA file, but it has been slightly modified to skip certain file checks. If the original OTA doesnt work, theres a good chance this will. (Since you are full stock now either one should flash without issue).
Hope those help! I recommend doing a bit of reading about each one (at least the OP and last few pages) and start with whichever you are most comfortable with.
Or, you could always use that most valuable tool, patience, and wait for the OTA to roll out for your area.
Good luck!
Click to expand...
Click to collapse
No no! Its fine, I wasnt planning using it or anything, I just wanted to get rid of it since I have no use for it, no need to apologize. , I was fully aware that I would lose all files, other than SD ext drive. I just wanted to make sure that all files are in the right place and none of the unnecessary files are taking up space (e.g. files from cyanogenmod)
As for the update, I talked to a samsung representative and they said one can go to Best Buy and get it updated there through a technician, so Ill try that later since I am close to it ATM. If it back fires, Ill try your suggestions.
I really do appreciate for the help , I have been completely lost for days but it turns out I was just using the wrong firmware. Thanks for pointing it out. Good karma is coming your way . Hopefully one day, I will be here again and trying out a new custom firmware.
Glad I could help!
If I remember right, someone who mentioned the best buy thing had said at the time that the first store they went to did not have the update yet. But I think they found another in their area did. So if they say its up to date and cant help, you might find another store close by can. (If there is one of course!)
Just fyi so you're not too surprised if that happens.
DocHoliday77 said:
Glad I could help!
If I remember right, someone who mentioned the best buy thing had said at the time that the first store they went to did not have the update yet. But I think they found another in their area did. So if they say its up to date and cant help, you might find another store close by can. (If there is one of course!)
Just fyi so you're not too surprised if that happens.
Click to expand...
Click to collapse
Ill hope for the best and prepare for the worst.
Of course, if the worst happens, I can just use one of your links you mentioned. :good::good: