Hello moto!
I am trying to find a solution for weeks. i can't find on xda-developers forum or anywhere.
I have a problem that is driving me crazy!
I love my hd7/h7300 android.
If remorse could kill i.....
I was trying to flash my phone with a custom rom and i got a BRICK. :crying::crying::crying::crying::crying::crying::crying::crying:
I don't know what i did wrong.
My h7300 doesn't boot anymore. I can't acess recovery menu or anything.
What happens when trying to turn on.
Absolutely nothing.
Only the red led seems to turn on with an almost imperceptible weak light. it is hard to see.
When i connect the "smart phone flash tool" it doesn't find the device.
I got the original rom but can't install. The software keep searching my device infinitely.
Please help. I love my phone.
Thanks. :cyclops:
Please try searching in your devices Q&A or General forums for better results.
leoneiva said:
Not found
Click to expand...
Click to collapse
Not going to do your homework, sorry. You need to search and post in the correct forums to get the right answers.
Related
Hey all,
This is my official "first" post. I rooted the A100 while it was on Honeycomb. Everything was fine. I got an ota update and updated to 3.2.1. Rooted it again and everything SEEMED fine. I got the ota ICS update and the tab would hang at the green android and give me a "!" after about 5 seconds. I fiddled with the update for a while and took it to a friend that knows more about this than I. He proceded to try and unlock the bootloader with the ICS unlock, while it was on Honeycomb. Now my tab is bricked with the green Acer logo, it will not boot. I have no access to recovery, fastboot, adb, bootloader. I can get it to APX mode. I tried to NVflash it, but when I use any NVflash commands, device manager just kicks my device off and the command doesnt execute. I cant use the EUU, because it keeps telling me my CPU ID is wrong, even though I KNOW its correct. I have searched the forums and sent PM's to everyone that has experienced this and fixed it, but no one has answered. Could SOMEONE, ANYONE, PLEASE help!!!!!!
Thank you in advance!!!!!
Cory
Really
No one out there has any insight into this? Ive seen that there are a couple people in the forums that have fixed this issue, but in their posts it doesn't really describe how because they were being PM'd. PLEASE, any info would be GREATLY appreciated!!!!
cooki3monst3r77 said:
No one out there has any insight into this? Ive seen that there are a couple people in the forums that have fixed this issue, but in their posts it doesn't really describe how because they were being PM'd. PLEASE, any info would be GREATLY appreciated!!!!
Click to expand...
Click to collapse
Try using the search on the forums, it's been discussed several times and the only way to fix it currently is to send it in to acer for repair and hope they replace it with a different board that the euu works with. Please stop posting this same question when its been asked repediatly already there are 4 separate posts with this same question being asked by 3 different people
Sent from my MB860 using XDA
OK
I have searched the forums for the past I cant tell you, how many hours. I have looked and looked and in one forum, it looks as though someone fixed this issue because they were able to somehow get to fastboot. I would not just post this on here without my resources having been exhausted. The problem is, in EVERY FORUM I CHECK, the answers and such are PM'd to each other! I have even PM'd the people that seemed to get something working.......to which I have received no reply. Ive seen the posts on this, Ive tried NVflash, I tried to boot holding EVERY combination of buttons, EUU doesnt work, because of the CPUID being "wrong". I have done my research, sir. Please PM me if you think I have wronged you in some way by posting something in a forum meant for helping others, instead of putting me on blast because you think Ive been lazy and not searched the forums.
cooki3monst3r77 said:
No one out there has any insight into this? Ive seen that there are a couple people in the forums that have fixed this issue, but in their posts it doesn't really describe how because they were being PM'd. PLEASE, any info would be GREATLY appreciated!!!!
Click to expand...
Click to collapse
can you boot into fastboot mode?
dunno
Im not sure if I can get to fastboot. There are a couple of people that, it seems, could get to fastboot and APX. Could you direct me on the ways of getting to fastboot? Adb doesn't work for me. Only APX mode. It boots to the green Acer logo. When I try to get to recovery (VOL+PWR), it hangs and will not go to recovery.
Sorry for being short earlier, Im just so frustrated with this. Ive been researching this issue for DAYS. (NVflash, APX, bootloaders, adb, etc....) No progress on it. I even have a DEV friend who may try to decompile the EUU and see if he can force push it to the tab....he just has to find the time. lol
done
At this point Im willing to use the tablet for target practice. If anyone wants it, to mess around with or whatever, you can pay for shipping and keep it.
cooki3monst3r77 said:
At this point Im willing to use the tablet for target practice. If anyone wants it, to mess around with or whatever, you can pay for shipping and keep it.
Click to expand...
Click to collapse
Well that is a hard offer to pass up...
Sent from my LG-P999 using Tapatalk 2
If you and orient fastboot and has the bootloader on the A200 prepare to unlock and install cwm recovery and is saved
hard-resset first try with the buttons
1 tablet off completely its
2 lock button on the screen is right
3 hold down power and volume - that is left
4 when the tablet vibrate release the power button and quickly move the screen lock button to the right and left without releasing the volume -
5 your tablet should start
but it works I say and try fastboot
I dont know if the boot loader is locked or not. I cant flash cwm because I cant get to recovery/adb/fastboot/etc. I tried the hard reset and the tablet hangs on the green Acer screen after reboot. NVflash doesnt work because ???, device manager just drops it when I try to send commands and nvflash says something about not being able to write to usb. And yes, I have the Nvidia apx drivers installed.
peporras said:
1 tablet off completely its ( holding it in landscape)
2 lock button on the screen is right
3 hold down power and volume - that is left
4 when the tablet vibrate release the power button and quickly move the screen lock button to the right and left without releasing the volume -
5 your tablet should start in fastboot mode
are you able to get fastboot going?
if so try to flashing a custom recovery from thor 17 ( google it)
i had a problem like this and was able to fix it by flashing the leak isc rom through this recovery. it might be worth a try.
Click to expand...
Click to collapse
I have a big issue, I was trying today to root my galaxy note 3 from t-mobile USA. When the phone re-started there was a message on the screen saying:
recovery booting
Set warranty bit : Recovery
and it does that over and over again, reboot every 5 seconds and the same message. I can't even put the phone on download or recovery mode. I can't do anything.
Pleaseeee help me out I'm so desperated.
Thanks in advance.
DjFearless said:
I have a big issue, I was trying today to root my galaxy note 3 from t-mobile USA. When the phone re-started there was a message on the screen saying:
recovery booting
Set warranty bit : Recovery
and it does that over and over again, reboot every 5 seconds and the same message. I can't even put the phone on download or recovery mode. I can't do anything.
Pleaseeee help me out I'm so desperated.
Thanks in advance.
Click to expand...
Click to collapse
Lol ............
They have like 30 diff threads asking the same exact thing you are. Take the time and read and self educate.
TWEAKED N3
Don't be so hard with me, I'm really new on this. Can you at least refer to me with one of those solutioned threads you say?
DjFearless said:
Don't be so hard with me, I'm really new on this. Can you at least refer to me with one of those solutioned threads you say?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2682396
Trust me it not personal and I have to be honest similar thread to yours was 5 down. I telling you this as someone who is not new to these forums. The guys here help out bid time but if they see you don't search or try and self help. When they see you don't search they will just ignore you. I have been one of the few guys who have helped guys out. Not for anything but I was once new as well a Dev pm me and set me straight and told me to stop asking questions.lol. I did and looked for my self and found my own way.
TWEAKED N3
I recently picked up the Z1 Compact, and since it was pretty easy to root and customize I dived into those sorts of things for the first time. For a while I had Cyanogenmod and made a back up and left it on my SD card. Later when the easy root method came out I switched back to stock. I installed dual recovery and made a back up. Some time later ,using my ever so careful brain, I tried to flash my Cyanogenmod back up instead of the stock back up. This leads me to where I am now. Can't get my phone into flash mode. When I hold down the power button it vibrates but nothing else. When I plug the phone into a power source it just keeps flashing a red notification light. I would really appreciate some help in fixing my phone, thank you.
potatobobguy said:
I recently picked up the Z1 Compact, and since it was pretty easy to root and customize I dived into those sorts of things for the first time. For a while I had Cyanogenmod and made a back up and left it on my SD card. Later when the easy root method came out I switched back to stock. I installed dual recovery and made a back up. Some time later ,using my ever so careful brain, I tried to flash my Cyanogenmod back up instead of the stock back up. This leads me to where I am now. Can't get my phone into flash mode. When I hold down the power button it vibrates but nothing else. When I plug the phone into a power source it just keeps flashing a red notification light. I would really appreciate some help in fixing my phone, thank you.
Click to expand...
Click to collapse
this guy had a similar problem, take a look, at this thread
Tonio78r said:
this guy had a similar problem, take a look, at this thread
Click to expand...
Click to collapse
Oh wow that helps so much. I guess my googling skills were not on point when I first tried to find a solution. My phone is completely fine now.
potatobobguy said:
Oh wow that helps so much. I guess my googling skills were not on point when I first tried to find a solution. My phone is completely fine now.
Click to expand...
Click to collapse
Such a great news :good:
You can update thread name with [Solved] tag I guess, It may help somebody else
The f*ck
Tonio78r said:
this guy had a similar problem, take a look, at this thread
Click to expand...
Click to collapse
This leads to another post, which leads to anoher post. How can I get my hard-bricked Z1c back?
Alan Revuelta said:
This leads to another post, which leads to anoher post. How can I get my hard-bricked Z1c back?
Click to expand...
Click to collapse
If you bricked it the same way I did as described above, just try to enter flashmode and flash a stock ftf using Flashtool , the page linked shows you how.
potatobobguy said:
If you bricked it the same way I did as described above, just try to enter flashmode and flash a stock ftf using Flashtool , the page linked shows you how.
Click to expand...
Click to collapse
Flasmode doesn't work.
Greetings everyone. I bought a Proscan PLT7044-k tablet to use as a chromecast remote, but doesn't work out how i planned. Anyway, I started messing around with it, bricked it, and figured out how to unbrick it through putting the original firmware back on it. THAT got all this Android stuff real interesting to me. Now, where my brain gets stumped at is putting CWM on this thing, so I can put custom ROMs on it and play with it more. I have tried EVERYTHING that I can find on google and all of the forums, nothing has worked! There is no bootloader, at least I'm pretty sure there isn't. I can't get into fastboot. When I try to rebbot into any kind of recovery or bootloader mode, I get a black screen. Rebooting into recovery mode just shuts my tablet off.. This has stumped me for about 3 weeks now. Endless nights of frustration just to get CWM! uugghh!! Can anyone help!? I know it's an older tablet, so I'm hoping someone figured it out a long time ago. Thanks folks, in advance. Whatever I need to paste on here for you guys/gals to see, just ask.
This is the wrong section to ask, there's no porting involved if you got an android device. youd get more replies in a more general section
Hello xda community,
I have a serious problem, as per title, with my beloved Z00D device.
I unlocked the bootloader and struggled for over three hours to let it get TWRP Recovery.
Once finally done, I moved on to flash the RussianBear CFW.
Sadly, at the end of the installation, it gave an error I had no time to write down (E: unable to mount, is what i can remember).
Since then it is stuck on the Intel Inside logo an reboots every few minutes just to go back to the same logo.
Holding volume up while powering won't open the bootloader, giving a usb logo instead.
Holding volume down render absolutely nothing.
I tried to follow an umbricking guide already that uses xFSTK. This program doesn't even start when prompted. So I'm officially stuck and with no cellphone. Abroad. Alone.
Help?
silly question did you open app as administrator?
You can do it as you are on the right road, just search and look for CHuvaCK21 advice and raw firmware.
Start here: hxxp://4pda.ru/forum/index.php?showtopic=657946&st=1160#entry46287238
In the end please make a tutorial for others as it could be useful some day ...
relu666 said:
You can do it as you are on the right road, just search and look for CHuvaCK21 advice and raw firmware.
Start here: hxxp://4pda.ru/forum/index.php?showtopic=657946&st=1160#entry46287238
In the end please make a tutorial for others as it could be useful some day ...
Click to expand...
Click to collapse
I'm afraid two main issues will pop up.
First of all, I can't access the device's bootloader to push a stock recovery in it.
The second is a simple and plain problem: I can't understand russian nor russian alphabet.
I moved on to flash the RussianBear CFW. :P[/QUOTE said:
Too late to speak about Russian alphabet and being afraid now
Use your common sense, google translate and go on as nobody can do it in your place.
Click to expand...
Click to collapse
Same problem man, what did you do? please help me