I have a big issue, I was trying today to root my galaxy note 3 from t-mobile USA. When the phone re-started there was a message on the screen saying:
recovery booting
Set warranty bit : Recovery
and it does that over and over again, reboot every 5 seconds and the same message. I can't even put the phone on download or recovery mode. I can't do anything.
Pleaseeee help me out I'm so desperated.
Thanks in advance.
DjFearless said:
I have a big issue, I was trying today to root my galaxy note 3 from t-mobile USA. When the phone re-started there was a message on the screen saying:
recovery booting
Set warranty bit : Recovery
and it does that over and over again, reboot every 5 seconds and the same message. I can't even put the phone on download or recovery mode. I can't do anything.
Pleaseeee help me out I'm so desperated.
Thanks in advance.
Click to expand...
Click to collapse
Lol ............
They have like 30 diff threads asking the same exact thing you are. Take the time and read and self educate.
TWEAKED N3
Don't be so hard with me, I'm really new on this. Can you at least refer to me with one of those solutioned threads you say?
DjFearless said:
Don't be so hard with me, I'm really new on this. Can you at least refer to me with one of those solutioned threads you say?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2682396
Trust me it not personal and I have to be honest similar thread to yours was 5 down. I telling you this as someone who is not new to these forums. The guys here help out bid time but if they see you don't search or try and self help. When they see you don't search they will just ignore you. I have been one of the few guys who have helped guys out. Not for anything but I was once new as well a Dev pm me and set me straight and told me to stop asking questions.lol. I did and looked for my self and found my own way.
TWEAKED N3
Related
i was upgrading to that new htc rom using the free cid unlock method.
i kept doing it but i kept getting that vendor id error.
then i ran the bat one more time and the screen on my dash went white.
then i ran the ruu and it was like at 50 percent but i didnt know that it was actually installing so i opened the task manager on my pc and i closed it.
then i rebooted the phone and it just stays in a htc screen.
and i didnt have the htc rom, i had the rogers rom.
so i realized it WAS installing while on the white screen and i shouldnt have cancelled it.
so now idk what to do.
is it bricked?
can someone help me please.
flash it again from the bootloader mode
can you give me threough the process please?
or can anyone help me on how to do this through any instant messenger?
im a noob at this
For future reference "noob's" have no place flashing firmware with uncertified firmware and procedures. One should read up fully on what to do if it fails before going at it.
Just a note
merwin said:
For future reference "noob's" have no place flashing firmware with uncertified firmware and procedures. One should read up fully on what to do if it fails before going at it.
Just a note
Click to expand...
Click to collapse
sorry mister a+ certified-senior-know-it-all-member
bootleg16 said:
can you give me threough the process please?
or can anyone help me on how to do this through any instant messenger?
im a noob at this
Click to expand...
Click to collapse
turn it off. hold camera key for three seconds and press power button.
Hey all,
This is my official "first" post. I rooted the A100 while it was on Honeycomb. Everything was fine. I got an ota update and updated to 3.2.1. Rooted it again and everything SEEMED fine. I got the ota ICS update and the tab would hang at the green android and give me a "!" after about 5 seconds. I fiddled with the update for a while and took it to a friend that knows more about this than I. He proceded to try and unlock the bootloader with the ICS unlock, while it was on Honeycomb. Now my tab is bricked with the green Acer logo, it will not boot. I have no access to recovery, fastboot, adb, bootloader. I can get it to APX mode. I tried to NVflash it, but when I use any NVflash commands, device manager just kicks my device off and the command doesnt execute. I cant use the EUU, because it keeps telling me my CPU ID is wrong, even though I KNOW its correct. I have searched the forums and sent PM's to everyone that has experienced this and fixed it, but no one has answered. Could SOMEONE, ANYONE, PLEASE help!!!!!!
Thank you in advance!!!!!
Cory
Really
No one out there has any insight into this? Ive seen that there are a couple people in the forums that have fixed this issue, but in their posts it doesn't really describe how because they were being PM'd. PLEASE, any info would be GREATLY appreciated!!!!
cooki3monst3r77 said:
No one out there has any insight into this? Ive seen that there are a couple people in the forums that have fixed this issue, but in their posts it doesn't really describe how because they were being PM'd. PLEASE, any info would be GREATLY appreciated!!!!
Click to expand...
Click to collapse
Try using the search on the forums, it's been discussed several times and the only way to fix it currently is to send it in to acer for repair and hope they replace it with a different board that the euu works with. Please stop posting this same question when its been asked repediatly already there are 4 separate posts with this same question being asked by 3 different people
Sent from my MB860 using XDA
OK
I have searched the forums for the past I cant tell you, how many hours. I have looked and looked and in one forum, it looks as though someone fixed this issue because they were able to somehow get to fastboot. I would not just post this on here without my resources having been exhausted. The problem is, in EVERY FORUM I CHECK, the answers and such are PM'd to each other! I have even PM'd the people that seemed to get something working.......to which I have received no reply. Ive seen the posts on this, Ive tried NVflash, I tried to boot holding EVERY combination of buttons, EUU doesnt work, because of the CPUID being "wrong". I have done my research, sir. Please PM me if you think I have wronged you in some way by posting something in a forum meant for helping others, instead of putting me on blast because you think Ive been lazy and not searched the forums.
cooki3monst3r77 said:
No one out there has any insight into this? Ive seen that there are a couple people in the forums that have fixed this issue, but in their posts it doesn't really describe how because they were being PM'd. PLEASE, any info would be GREATLY appreciated!!!!
Click to expand...
Click to collapse
can you boot into fastboot mode?
dunno
Im not sure if I can get to fastboot. There are a couple of people that, it seems, could get to fastboot and APX. Could you direct me on the ways of getting to fastboot? Adb doesn't work for me. Only APX mode. It boots to the green Acer logo. When I try to get to recovery (VOL+PWR), it hangs and will not go to recovery.
Sorry for being short earlier, Im just so frustrated with this. Ive been researching this issue for DAYS. (NVflash, APX, bootloaders, adb, etc....) No progress on it. I even have a DEV friend who may try to decompile the EUU and see if he can force push it to the tab....he just has to find the time. lol
done
At this point Im willing to use the tablet for target practice. If anyone wants it, to mess around with or whatever, you can pay for shipping and keep it.
cooki3monst3r77 said:
At this point Im willing to use the tablet for target practice. If anyone wants it, to mess around with or whatever, you can pay for shipping and keep it.
Click to expand...
Click to collapse
Well that is a hard offer to pass up...
Sent from my LG-P999 using Tapatalk 2
If you and orient fastboot and has the bootloader on the A200 prepare to unlock and install cwm recovery and is saved
hard-resset first try with the buttons
1 tablet off completely its
2 lock button on the screen is right
3 hold down power and volume - that is left
4 when the tablet vibrate release the power button and quickly move the screen lock button to the right and left without releasing the volume -
5 your tablet should start
but it works I say and try fastboot
I dont know if the boot loader is locked or not. I cant flash cwm because I cant get to recovery/adb/fastboot/etc. I tried the hard reset and the tablet hangs on the green Acer screen after reboot. NVflash doesnt work because ???, device manager just drops it when I try to send commands and nvflash says something about not being able to write to usb. And yes, I have the Nvidia apx drivers installed.
peporras said:
1 tablet off completely its ( holding it in landscape)
2 lock button on the screen is right
3 hold down power and volume - that is left
4 when the tablet vibrate release the power button and quickly move the screen lock button to the right and left without releasing the volume -
5 your tablet should start in fastboot mode
are you able to get fastboot going?
if so try to flashing a custom recovery from thor 17 ( google it)
i had a problem like this and was able to fix it by flashing the leak isc rom through this recovery. it might be worth a try.
Click to expand...
Click to collapse
Hello everyone I have bricked my note 2 and suddenly I can't boot because it's stucked on the Samsung Logo. After i installed a font program it said that I had to reboot and then I did.
And then I was trying to recover with "recovery-cwm-6.0.1.5-N7100"
But right now it doesn't display more than Samsung galaxy note 2...
Would be awesome if you guys can help me
Well youre in luck because if it showing a Samsung logo its not bricked.
Second just flash the factory image found in the android development forum. You can do this by booting into download mode by holding the power button and home button and volume down as it boots and then use odin to flash the .tar factory image you just downloaded...its simple really. So dont panic because its entirely fixable!
Just go find a guide on how to flash factory images and youll find step by step Instructions
Sent from my SGH-T889 using Tapatalk 2
ssCISengineer said:
Well youre in luck because if it showing a Samsung logo its not bricked.
Second just flash the factory image found in the android development forum. You can do this by booting into download mode by holding the power button and home button and volume down as it boots and then use odin to flash the .tar factory image you just downloaded...its simple really. So dont panic because its entirely fixable!
Just go find a guide on how to flash factory images and youll find step by step Instructions
Sent from my SGH-T889 using Tapatalk 2
Click to expand...
Click to collapse
Thank you so much! I fixed it as well!
zorritokris said:
use ths stock rom ,this not mine a just put the links all the credit is for teshxx (stock rom) http://forum.xda-developers.com/showthread.php?t=1969551
the guide credit is for Intratech(guide) http://forum.xda-developers.com/showthread.php?t=1671969
i hope that your problem can be fixed
Click to expand...
Click to collapse
Man do not use this stuff this guy posted. That guide and firmware in the guide is for the s3. The first link is good firmware.Hes been posting a bunch of garbage on these forums lately. Im going to report him again before he bricks someones phone giving out wrong firmware links
Sent from my SGH-T889 using Tapatalk 2
I'd have to be shown it is possible to brick a high end samsung device. Between recovery and in the worst cases Odin or in some cases emergency recovery in Kies I have recovered from a complete non bootable phone. No vibrate, no splash screen, nothing. One of the real positives to Samsung and their software. An, as far as I am concerned, virtually unbrickable smartphone.
jonjon68 said:
I'd have to be shown it is possible to brick a high end samsung device. Between recovery and in the worst cases Odin or in some cases emergency recovery in Kies I have recovered from a complete non bootable phone. No vibrate, no splash screen, nothing. One of the real positives to Samsung and their software. An, as far as I am concerned, virtually unbrickable smartphone.
Click to expand...
Click to collapse
Ill tell you a way. Go flash some roms from other phones see what kind of damage that does. Most people dont make efs backups until its too late. See jow many times you can flash in correct roms before you lose that all important imei
Sent from my SGH-T889 using Tapatalk 2
post edited
i only make 2 mistakes and theres people saying tath i post a lot of garbage oh please ,sorry im human im not perfect like you sorry and a have a nice day,please moderator erase this post
zorritokris said:
i only make 2 mistakes and theres people saying tath i post a lot of garbage oh please ,sorry im human im not perfect like you sorry and a have a nice day,please moderator erase this post
Click to expand...
Click to collapse
It will be ok i promise everyone gets ,mad sometimes, i did a couple minutes ago:crying: >>>>>>>> Op: when you try to recover from bad situation use odin and this...http://forum.xda-developers.com/showthread.php?t=1975560
zorritokris said:
i only make 2 mistakes and theres people saying tath i post a lot of garbage oh please ,sorry im human im not perfect like you sorry and a have a nice day,please moderator erase this post
Click to expand...
Click to collapse
Yea well your mistakes cost people money thats the problem. Dont post or give instucrion when you dont know what youre doing. You dont have to post to use this forum. Just read.
What is so hard to understand about this?
Sent from my SGH-T889 using Tapatalk 2
solidvu said:
Hello everyone I have bricked my note 2 and suddenly I can't boot because it's stucked on the Samsung Logo. After i installed a font program it said that I had to reboot and then I did.
And then I was trying to recover with "recovery-cwm-6.0.1.5-N7100"
But right now it doesn't display more than Samsung galaxy note 2...
Would be awesome if you guys can help me
Click to expand...
Click to collapse
If you soft-bricked your phone because you messed up the fonts like me just now, you don't have to reflash the entire ROM!
Instead it's enough to just restore the fonts via one of the zip files found [URL="]http://tips4droid.com/how-to-install-jelly-bean-font-by-flashing-it-through-cwm-recovery/#.US8t2Ddc1ic"here:[/URL]
I copied the zip file to my external SD card and then used CWM Recovery to install it to my phone.
To enter CWM Recovery, press Volume UP, Home and Power Button at the same time.
Hope this is helpful!
Cheers, FW
Although Im sure he appreciates the tip, this thread is almost 4 months old, and Im sure its been fixed and/or replaced by now.
jonjon68 said:
I'd have to be shown it is possible to brick a high end samsung device. Between recovery and in the worst cases Odin or in some cases emergency recovery in Kies I have recovered from a complete non bootable phone. No vibrate, no splash screen, nothing. One of the real positives to Samsung and their software. An, as far as I am concerned, virtually unbrickable smartphone.
Click to expand...
Click to collapse
I had the first note and trust me... the eMMC bug bricked many folks... brick, bricked... bricked
stevessvt said:
Although Im sure he appreciates the tip, this thread is almost 4 months old, and Im sure its been fixed and/or replaced by now.
Click to expand...
Click to collapse
There might be others, such as me, you know...
what i did the other day was.....
i was installing different ROMs. maybe 3 or 4 a day just to get a feel for different ones. Since i am using a t889 on NET10's ATT network, i wanted to ATTEMPT to change over my phones hardware or internal settings to pick up the ATT towers better... my phone is already unlocked for ATT, so whatever im attempting is not needed. not knowing exactly what I'm doing I confused myself a bit. I went to the GooManager recovery page and was wiping all my information so i can install another ROM. while wiping the information off my phone, i was browsing through my SD card i had in the phone and saw a modem pack i put on it. FORGETTING that i just deleted everything i went ahead and just installed the modem pack and rebooted my phone. lol it got stuck on the SAMSUNG GALAXT NOTE 2 page. my MAC, PC & KIES on both weren't picking up my phone via USB. i left the phone attached to my PC and went to get dinner. came back 2 hours later and saw that my phone was connected to the computer. I ran ODIN, put a stock image of tmobiles system on the phone and had to start over with my ROM experiment.
needless to say, i was bummed thinking that i just broke such a nice phone.
Please read forum rules before posting
Questions and help issues go in Q&A
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator
And bricked means brick...paperweight...no life, no lights
I prefer Sponged=soft-bricked means you can odin in stock firmware and restore service
I have a s3 and I went to use chainfire and I clicked install and reboot and now it's stuck on the Samsung logo I really really don't wanna lose any photos or anything on my phone someone please help please ASAP need to fix this tonight thank you
What options did you choose before the reboot? hold home, power, and Volume up... where does it take you, and what does it say?
mt3g said:
What options did you choose before the reboot? hold home, power, and Volume up... where does it take you, and what does it say?
Click to expand...
Click to collapse
i was trying to install it and i clicked install and reoot and now its stuck on the samsung logo and i tried that and it just rebooted and stayed on the samsung logo untill my battery died and now im charging it liek the battery comes on it but when i try to turn it back on it stays on the samsung logo still
Just use ODIN http://forum.xda-developers.com/showthread.php?t=1949687 Read more before posting and refer a specific question after you've read. Help us, help you.
mt3g said:
Just use ODIN http://forum.xda-developers.com/showthread.php?t=1949687 Read more before posting and refer a specific question after you've read. Help us, help you.
Click to expand...
Click to collapse
i dont wanna lose anything on my phone this happen out of no where and didnt back up anything is there a way you can help me or if someon can help me tonight
Eli9144 said:
i dont wanna lose anything on my phone this happen out of no where and didnt back up anything is there a way you can help me or if someon can help me tonight
Click to expand...
Click to collapse
You don't have a choice. And, punctuation helps people read your posts better.
Sent from my Galaxy Nexus using xda premium
I've never lost anything using ODIN. You need to stop panicking and breathe and read.
mt3g said:
I've never lost anything using ODIN. You need to stop panicking and breathe and read.
Click to expand...
Click to collapse
please check your pm thank you
I'm helping you hear and giving you the same answers I'm going to check in my PM inbox. I get about 10 PMs a day I'm tired of them lol. Just say what you want here and read.
mt3g said:
I'm helping you hear and giving you the same answers I'm going to check in my PM inbox. I get about 10 PMs a day I'm tired of them lol. Just say what you want here and read.
Click to expand...
Click to collapse
my phone isn't going into recovery or download mode its staying stuck on the samsung logo
are you sure you're doing the process right? hold until you see something on the screen and let go, usually like 2 seconds for download mode
Eli9144 said:
i dont wanna lose anything on my phone this happen out of no where and didnt back up anything is there a way you can help me or if someon can help me tonight
Click to expand...
Click to collapse
Just about every root method, including videos, tells you to store all important files in a safe location, such as a pc, BEFORE beginning the root process as doing so may cause potential bootloops and such, forcing you to do a factory reset right then and there. Judging by the OP you really haven't done much reading have you? I suggest you start doing so. Reading, watching, and working through your own mistakes are the keys to success..
Sent from my Nexus 4 using xda premium
Hello, Everyone,
I'm so glad that I find this forum here.
Please help me out!!! I tried to root my Note2 last night.(I bought the verizon version two weeks ago) I thought it was almost done and it showed PASS! Then the cell started rebooting but could not stop.
I called Costco, where I bought the phone. But they said we can't help you. Now I can't receive phone called because basically the phone can't be on. It just keeps rebooting itself. Please help...
Thanks a lot in advance!
Henry
upwind32 said:
Hello, Everyone,
I'm so glad that I find this forum here.
Please help me out!!! I tried to root my Note2 last night.(I bought the verizon version two weeks ago) I thought it was almost done and it showed PASS! Then the cell started rebooting but could not stop.
I called Costco, where I bought the phone. But they said we can't help you. Now I can't receive phone called because basically the phone can't be on. It just keeps rebooting itself. Please help...
Thanks a lot in advance!
Henry
Click to expand...
Click to collapse
Wrong forums... you have a Verizon model.
However, check here and read section 1A as this can help you return to stock. Good luck.
Thanks, but where shall I post my thread?
Thanks, but where shall I post my help?
Darth Pooh said:
Wrong forums... you have a Verizon model.
However, check here and read section 1A as this can help you return to stock. Good luck.
Click to expand...
Click to collapse
upwind32 said:
Thanks, but where shall I post my help?
Click to expand...
Click to collapse
http://forum.xda-developers.com/forumdisplay.php?f=1886
Right here would be a good start.
Thanks
Thank you.
I might have to post again over there. so far, i checked a lot of ways but none fits my situation. The problem is that the phone can't be put into download mode [with phone off, hold vol. down + home + power ]. When you do that, it pops up the starting image and keeps rebooting itself. It can not be connected to computer as it is always dead.
Darth Pooh said:
http://forum.xda-developers.com/forumdisplay.php?f=1886
Right here would be a good start.
Click to expand...
Click to collapse