Related
I was thinking about getting these, has anyone purchased and received this for their Vibrant? Was wondering if its any good. Thanks in advance.
http://cgi.ebay.com/3-Clear-Screen-...ewItem&pt=PDA_Accessories&hash=item2eaeab13cb
Refer to the screen protector thread.... Some like it and some don't because it's somewhat sticky..took me a while to get it on without bubbled and it still has a couple...also leaves a lot of marks and creases
Sent from my SGH-T959 using XDA App
Yes I just got mine.. they are CRAP! don't even waste the $3 on them... soo flimsy and they feel the same as the stuff that covers new electronics/screens... very thin and flimsy, imposible to install without bubbles b/c its soo flimsy, and using a CC to push the bubbles out of it i scratched and stretched all of them... worthless product
Mine was terrible at first..then used water to install and it's actually not bad...waiting for the clear freak to see what the hype is about but I'm guessing they're the same as these
Sent from my Samsung Vibrant using XDA App
I just got these in today.
These are made out of some sort of vinyl material. It seems like it would be impossible to install this without any bubbles.
Even if you were to get rid of the bubbles, the surface of this is not very good or smooth enough for finger scrolling.
I had ordered a screen protector from dealextreme.com for my old G1 and it was great. It was nice and thin and went on without any problems the first time. It's still on after over a year without any sign of coming off.
I would not recommend anybody to buy this.
So after a month of having this phone, I have decided that it is an absolute beast and has been made even beastlier with the hardworking developers on this site. However, I have (somehow) obtained a few scratches on my screen and as a result, have decided to invest in a good screen protector. My ideal screen protector is one that takes away minimal feeling of the "glass" on the screen, while simultaneously keeping the phone looking fresh and sharp as if there is nothing on there. In the worst case scenario, I'm looking to be able to cover up my current scratches, and then prevent future ones.
If anyone has any recommendations that would be great - thanks!
Just get the zagg at the tmobile store it looks weird the first day but give it 24 hours and it will be perfect. Also use the foursquare app to check in and you will get 30% off the screen protector. Oh and it comes with a lifetime warranty.
Sent from my SGH-T989 using XDA App
How did you get scratches? since launch and still no scratches, although i do make it a point to keep my phone in my right pocket and keys in the left.
charvin68 said:
Just get the zagg at the tmobile store it looks weird the first day but give it 24 hours and it will be perfect. Also use the foursquare app to check in and you will get 30% off the screen protector. Oh and it comes with a lifetime warranty.
Sent from my SGH-T989 using XDA App
Click to expand...
Click to collapse
Hmm okay, thanks for your input! I'm currently looking at SGP's Ultra Fine protector, it seems pretty good, not too sure though.
talltexan said:
How did you get scratches? since launch and still no scratches, although i do make it a point to keep my phone in my right pocket and keys in the left.
Click to expand...
Click to collapse
To be honest I have no idea. I have not been in a 50 mile radius of any sort of sand since I got the phone, nor have I ever dropped it or anything like that. The only thing I could think of would be that it got scratched while in one of my pockets? Although that is pretty unlikely since I always give my S2 its own pocket..
SGP
SGP, great protection and crystal clear.
SladeNoctis said:
SGP, great protection and crystal clear.
Click to expand...
Click to collapse
You would be referring to the Ultra Fine one, not the Ultra Crystal one by SGP, right?
Look into Realook. It looks and feels like it isn't there. If you look at my phone, you can't even tell it's there, covers the entire screen as well.
Realook is so perfect there is no way of knowing that its there. Only thing is its not as oleophobic or anti fingerprinting as it says. But all premium protectors are like that too - even though they advertise elsewise.
Sent from my SGH-T989 using xda premium
I discovered a tiny pinhead chip in mine yesterday over the menu button, so at least its not visible. I cant feel it when using the phone, but if you rub your fingernail on the screen you feel it.
I worried about it a bit, but its a phone, and i have the insurance.
The Realook protectors definitely seem to b getting some great reviews. I will most likely end up buying one of them, thanks again everyone!
Sent from my SGH-T989 using XDA App
Ghost armor is the best for me. I have that with my vibrant, sensation and SGS2
shinigenEddy said:
You would be referring to the Ultra Fine one, not the Ultra Crystal one by SGP, right?
Click to expand...
Click to collapse
Ultra Fine is matte so the it adds a bit a of blurry effect, i was referring to the Ultra Crystal one a personal favorite of mines.
---------- Post added at 02:00 PM ---------- Previous post was at 01:54 PM ----------
peeturr said:
Realook is so perfect there is no way of knowing that its there. Only thing is its not as oleophobic or anti fingerprinting as it says. But all premium protectors are like that too - even though they advertise elsewise.
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
I had bad experiences with realook, with its own squeegee scratched the screen protector. And i didn't add alot of pressure, they sent me another one but i eventually had to get a refund because it was just so easy to get scratched. Remember my personal experience maybe others had it better than me, but the only two companies i would go for screen protectors is SGP(real good quality and great customer service) and Zagg(lifetime support).
I just put a reallook protector on mine and it didnt come with a squeegee. The instructions said to use the cloth to rub out the bubbles. Putting it on took some real effort though. About 30min into the process of application (i just couldnt get it aligned right) i dropped it sticky side down on the floor. I had to spend another 20 min cleaning it off using scotch tape but it ended up going on fine with no dust. It works great. Ive only had it a week though so i cant comment on the scratchproofness.
SladeNoctis said:
I had bad experiences with realook, with its own squeegee scratched the screen protector. And i didn't add alot of pressure, they sent me another one but i eventually had to get a refund because it was just so easy to get scratched. Remember my personal experience maybe others had it better than me, but the only two companies i would go for screen protectors is SGP(real good quality and great customer service) and Zagg(lifetime support).
Click to expand...
Click to collapse
I discovered this ebay sp supplier when I was a Sensation addict. They were the only ones that I found that would fit the Sensation's curved screen. I have since installed them on every phone in my household. I put that bleeeep on everything! They are a dry install product, superclear and not rubbery. I have paid many times more for equal or less quality product.
Code:
http://forum.xda-developers.com/showthread.php?t=1164740
I have the Zagg invisible shield on mine and i hate it. I just ordered the ultra tough ones from bodyguardz.
The Zagg has a real bad orange peel affect. It looks horrible if you are looking at an angle or using it outside.
Hekademos said:
I just put a reallook protector on mine and it didnt come with a squeegee. The instructions said to use the cloth to rub out the bubbles. Putting it on took some real effort though. About 30min into the process of application (i just couldnt get it aligned right) i dropped it sticky side down on the floor. I had to spend another 20 min cleaning it off using scotch tape but it ended up going on fine with no dust. It works great. Ive only had it a week though so i cant comment on the scratchproofness.
Click to expand...
Click to collapse
It only took me about 5 min to get it straightened up and applied on. Then maybe like a few seconds to get the air bubble out from there. Didn't get any dust/lint on the SP so for me it was perfect on the dot. Even if you look at it under the light, you won't know it's there. There is only one small tell, by the earpiece that you can see it's there
+1 for Ghost Armor. The local mall has a kiosk where they apply it for you...and only $5 to have them replace it. Best screen shield i ever used, great value, highly recommended
charvin68 said:
Just get the zagg at the tmobile store it looks weird the first day but give it 24 hours and it will be perfect. Also use the foursquare app to check in and you will get 30% off the screen protector. Oh and it comes with a lifetime warranty.
Sent from my SGH-T989 using XDA App
Click to expand...
Click to collapse
Worst advice ever, well perhaps not but definitely not a protector I would recommend. The problem with the Zagg invishield is that its very rubbery and more times the coefficient of friction will be too great to even enjoy doing anything on the phone.
I have the SGP ultra crystal and I'm very happy.
Had a zagg on a previous phone and didn't like it as much as this one.
Here is a GREAT ONE!
This one is very good quality, its also VERY cheap, I ordered 2 of them which is a total of 4 Screen Protectors,
Its Crystal clear, feels great on the fingers and doesn't feel cheap.
Perfect size, no cutting required an theres holes for the FFC and Speaker and stuff
Its absolutely great! and only 2 dollars (free shipping) for two of them!
I seriously can't even tell i have a screen protector on, it came out perfect!
Last but not least, there ya go!
http://www.amazon.com/gp/product/B005Z2B8QS/ref=oh_o00_s00_i00_details
Hey guys, if you guys are looking for a cheap full body film protection like zagg check out xtremeguard its $5 on amazon + free shipping no tax (gotta love amazon).
I've been through a couple of these full body protections on various devices: zagg, bodyguardz, skinomi, and xtremeguard. They are all virtually the same, the rubbery kind. I actually just order these and should be on its way soon. From what I remember it's not orange peel.. it only gets that "peel" look when you squeegy too hard or stretch the film.
I assume it won't be as nice as ghost armor, but it's only $5 compares to $30 + tax... and honestly, my phone is white and I prefer the clear look.. and i bet many others would too.
If you don't like the rubber feel screen protector, feel free to leave that off and apply your preferred protection (magnum)
you said its not as nice as the GA, but my question to you is that does it stick well like GA? im thinking of trying out your product since im using a white SG2 as well but can you give us your user input after using it? is it like a smooth surface or carbon like GA?
thanks,
ugotproblemz said:
you said its not as nice as the GA, but my question to you is that does it stick well like GA? im thinking of trying out your product since im using a white SG2 as well but can you give us your user input after using it? is it like a smooth surface or carbon like GA?
thanks,
Click to expand...
Click to collapse
It's the same as the other products i mentioned... Like zagg. it's a smooth surface... Not carbon because well it's not carbon designed. Not sure how else to describe it, if you seen or used zagg before then yeah.
Adhesion sticks well. I haven't received it yet for the gs2 but if it's like how it was for other devices. It's a good cheap product. Other users have mentioned it somewhere
Sent from my SGH-T989 using XDA App
I used it as a screen protector, it sucked because it didn't feel like the same as the screen.
Husam2011 said:
I used it as a screen protector, it sucked because it didn't feel like the same as the screen.
Click to expand...
Click to collapse
It does add a tiny bit of a rubbery feel but I've had no issues at all typing / using the touchscreen. I've had mine on here over a month and it still looks new. The only issue is with the textured battery door. The skin leaves little bubbles because of it. I left it on just for the added protection. I'm also using a tpu case and feel safer having an extra barrier between it and the phone ( dust particles can scratch up a phone pretty bad when they get between the skin and the phone) .
Sent by my SGH-T989 from the Darkside ©
Wow this thing isn't bad at all, xtremeguard really did well on this one.
each film provided goes all the way to the edges.. The screen i actually had to trim a part or two because i wasn't able to place it on perfectly but no big deal at all. the rubbery feel on the screen isn't bad at all. It actually feels better than the cheap plain screen protectors that leaves you grease smudges. This actually prevents that quite a bit. i have the white gs2 so mine sticks on my back really well.
Complaint is that it left the top corners pretty exposed. But i just cut a couple strips from the left over film and placed them on.
I'll add some pictures.. If it is even visible lol
The film thickness isn't bad, it makes the screen about the same height as the surrounding bezel.
I have yet to put on my flex d3o case but i know that'll give the fit problems... Probably have to get a tpu case
When i say trim... It's like a very very small like .5mm strip. I assume it's a perfect fit on the screen thus if you can't put it on perfectly expect some lifts
Sent from my SGH-T989 using Tapatalk
ebay currently has it for $2.49 shipped. i bought just the screen protector a while ago, and i wasn't too fond of that wet install, but did manage to stick it on. the fitment is kinda poor, although i did trim a little bit of here and there, but it still didn't quite fit perfect. i emailed the vendor and they sent me a new one pretty fast, but i didn't bother to try it again. i bought two cheap ones from amazon recently and the fitment was a little bit smaller than the screen, but at least it wouldn't bubble up with my d30 case on
ebay link fyr:
http://www.ebay.com/itm/T-Mobile-Sa...ccessories&hash=item336d48f37a#ht_2709wt_1397
thanks for the update, just picked one up, we'll see how well it works for me
MMakoto said:
ebay currently has it for $2.49 shipped
ebay link fyr:
http://www.ebay.com/itm/T-Mobile-Sa...ccessories&hash=item336d48f37a#ht_2709wt_1397
Click to expand...
Click to collapse
wow nice find, but yeah wet installs are a pain in the butt! But if done correctly, it ends up pretty nice.
I can guess why the fitment might be off and people should take note especially for the screen... they made the screen a very tight fit and when peeling off the film make sure not to stretch it! once it's stretched, it doesn't go back to its original form right away.
tips on wet install:
-bowl of your solution (soap plus water) better than using a spray
-don't use too much solution, just enough so you can easily take on and off the film, but not to the point where its all slippery
-steamy room (keeps dust down)
-alcohol wipes, don't bother drying
-for screen avoid the bubbles! like most protectors the bubbles will go away, but for this material... when it goes away it, it creates that orange peel effect in that small area.. otherwise its a smooth surface.
-do not squeegee too hard, this causes it to stretch.. use the cloth to soak up the water being squeezed out. I've heard people use the squeegee and the cloth together... haven't done it myself.
-wait until one film fully stays down before applying the next piece... total of 6 easy pieces.
If you don't like the screen protector.. I know there are quite a few who doesn't like the invisible armor rubber feel, you can just use another screen protector
HOWEVER, i recommend using the full body part though. It's really good stuff for those who don't want to put out money for zagg or ghost armor. $2.50 you can't go wrong with that lol.
@mmakoto, you should try out the full body part, I've used this material for every phone i have and it prevents it from the minimal scratches you get from hard cases.. leaving the phone on the table or hard surfaces... keys, low drops.. you get the gist.. It keeps the phone having that smooth slick feel once removed. Oh and it's thinner than zagg. It usually keeps my resale value for the phone high.. like $50 over the average.. thats some good ROI.
D3O FLEX fitment: the flex is a bit looser than the 2 tone ones.. i have both but i doubt the 2 tone one would do well with this.. don't want to risk it
It is able to conform around the phone with the protection on nicely.. If you know about the d3o case... it covers right above the bezel area.. so my screen which had minimal amount of screen protector resting on the bottom right bezel area is barely being lifted (this is user application fault) I can press the screen back down easily.. i will have to trim that area just a tad.
NOTE: the other parts of the screen that i was able to perfectly apply my screen protector (not on the bezel) it fits wonderfully.
TL;DR: Cheap alternative to full body protection (ZAGG). Use a different screen protector if you don't like the rubber feel (not that rubbery though). D3O flex case fits well over it. TPU would probably be a better choice (more room for error)
EDIT no pictures yet... I don't have another camera.. gonna have to wait for the lady to come back from cheating on me in vegas (jk).
I installed this last night. I only did the edges and the battery door since I don't use a screen protector anyway. The back door looks like it has a lot of porosity right now and not sure if that'll go away. The edges work well though I didn't place them that great. It works though. I bought an extra set too. Really cheap!
I may end up doing ghost armor in the near future as this was most to see how I like this style.
Sent from my SGH-T989 using XDA App
Thinking of getting one, for the ones that still have it on how it holding?
Like most full body ones. it gets old and discolored. It held on really well but it started making my white phone look dirty so i just switch it out. It's cheap so i don't mind. Just make sure the corners are down well. I kept taking mine in and out of my case and it started to make the corners peel.
Sent from my SGH-T989 using xda app-developers app
I am normally not the type to write a review of a product just simply because I'm not usually impressed by a product. Upon purchasing this phone I looked at it as an investment a year down the line something new come out and I want to protect this in order to get the best resale value of the phone. I hate using a screen protector I always have felt that no matter what I used it took away from the color and clarity of my screen and also ended up getting a lot of a fine scratches on it that I never really noticed on the gorilla glass.
Installation for this product literally only took me about five minutes and I am no expert when it comes to installing screen protectors. Though the screen protector does not have any healing abilities due to its surface like other screen protectors of finish on it is absolutely smooth as silk which is what I was looking for since I use Swype to text. The other ones with the healing ability the surface is just too sticky to use swipe texting in an efficient manner.
The product is a little bit pricey I picked it up at a local Best Buy store for about $27 with tax but it is well worth it to a protect my investment that I plan on selling in the future.
It comes with a lifetime warranty so I do not even have to worry about damaging the screen protector as I will be able to get a new one in replacement of this for the longevity of the phone. I'm not a rich person by any means and $27 for a thin piece of film for my phone is a lot to me but I have to say it's definitely worth it.
Pros – silky smooth finish that easily wipes off any smudges that may occur. Very tough military grade scaring protector used helicopter blades. Amazing see-through clarity zero opaqueness. Very easy application takes literally minutes.
Cons – price is a little bit high probably could've got a cheaper online but I did not want to wait. Removing the extra water and bubbles seems almost impossible to get every single square inch of it out I'm hoping they will evaporate in a few days.
I hope you all enjoyed my first review of a product.
Good review. I have the HD on my phone as well. I was a bit worried at first, as there seemed to be some "orange peel" effect after installing. After a couple days, I'd say 90% is gone. Fortunately, I got mine for free using a BB gift card. If I had to choose one to purchase, I'd probably just go with the SGP Ultra Nano Clear. Cheaper, much larger install base, and easier to lay on - plus, I wouldn't be fuelling Best Buy.
Sent from my SCH-I535 using xda premium
I bought 4 and I've used Invisishield on other phones. I do recommend it to a lot of people. While the HD is clearer than the regular, it can eventually become riddled with dents and scratches. Thankfully, as you said, there is a lifetime warranty on the screen protectors so send it back for a new one. Just pay the shipping and handling.
sekigah84 said:
I bought 4 and I've used Invisishield on other phones. I do recommend it to a lot of people. While the HD is clearer than the regular, it can eventually become riddled with dents and scratches. Thankfully, as you said, there is a lifetime warranty on the screen protectors so send it back for a new one. Just pay the shipping and handling.
Click to expand...
Click to collapse
The lifetime warranty is a plus. I've also found that scratches / dents on the screen will repair itself in about an hour or so. Kinda spooky.
I don't have the HD version, just the regular zagg invisibleshield, but I'm really disappointed with it. They actually put a zagg logo on the damn thing, which is ironic considering "invisible" is in the product name. It's really quite noticeable on the white s3, pretty big bummer, in addition to the terrible feel and poor cutout quality. I will never buy another zagg product.
It's funny, I I asked the guy working at a zagg kiosk about the branding, and noticed his iphone did not have it. He said it was because of the size of the screen. Then blamed the logo on the fact that some company called body armor or something also started offering phone skins. So if another company offers a similar product you differentiate by making yours worse?
Does the HD version still have the zagg logo in the bottom right?
I seem to remember reading the HD version does not repair itself well or at all? The thread (which I can not find) even quote's a Zagg CSR explaining that the HD is thinner than the original, and because of that it doesn't have the same healing advantages... DON'T SHOOT THE MESSENGER, I'M SIMPLY REPEATING WHAT I READ HERE. And it was because of that thread when I bought MINE, I bought the original NON-HD version, because I was familiar with it and KNEW it repairs itself. I can live with the slight orange peel knowing that if I put the phone in my pocket with my keys, my phone case + screen will be protected. :good:
I keep going back and forth on buying one of these, the HD version. Your review may push me to try it. I had the original on a previous phone and I didn't like the orange peel and the sticky feeling. Thanks for the review.
I had a similar Zagg branding on my old HTC vivid. Turned out that Zagg logo scratched right off. Almost like scratching off a lottery ticket. Might give your Zagg logo a gentle scratching - bet it comes off.
Sent from my Galaxy Nexus using Tapatalk 2
I have the HD installed presently. I like it. It's a good protector. ...until I think about how much I paid for it. It is a couple bucks less than the XGearlive tempered glass protector that is coming out later this month.
Friend works at Future Shop, got it for $7 and did professional installation ( or experienced ), and yes its silky smooth
I generally dislike screen protectors and have posted many times how they aren't necessary. That being said, I had a Zagg HD installed at a local Best Buy Mobile just to see if I'd like it. It's been on several weeks now but every day I contemplate ripping it off because of the dents and orange peel effects along with some tiny debris that collects along the edges sometimes but I've held back so far. I don't think it'll last much more than a few weeks though........ I miss my perfect and bare screen but I don't miss my paranoid expectation that a screen scratch is inevitable.
Sent from my SGH-T999 using xda premium
Yeah, mine is starting to get lint dingleberries every time I pull it out of my pocket. Oddly, the one on my Thunderbolt is still going strong, although it wrinklier than an elderly elephant's nutsack. I think I'm gonna pull it off my S3 and use a Nano Ultra Clear that came with my SPG case.
Sent from my ADR6400L using xda premium
+1 for the spg clear. I won some from there website and they're amazing. Its like I don't even have a screen protector on.
Sent from my SAMSUNG-SGH-I747 using xda premium
Does anyone use a case with their InvisiShield HD? I have the Body Glove case, which I really like... but the lip around the front of the screen is so tight, it pushes the edges of the InvisiShield up off the screen. Luckily I was able to push the shield back down with apparently no damage, but now I can't use my case. I still have time to return it, but now I'm wondering what case is compatible with the screen protector?
jlczl said:
It's been on several weeks now but every day I contemplate ripping it off because of the dents and orange peel effects along with some tiny debris
I miss my perfect and bare screen but I don't miss my paranoid expectation that a screen scratch is inevitable.
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
That's it...... I ripped it off today. What a waste.
Sent from my SGH-T999 using xda premium
perigee said:
Does anyone use a case with their InvisiShield HD? I have the Body Glove case, which I really like... but the lip around the front of the screen is so tight, it pushes the edges of the InvisiShield up off the screen. Luckily I was able to push the shield back down with apparently no damage, but now I can't use my case. I still have time to return it, but now I'm wondering what case is compatible with the screen protector?
Click to expand...
Click to collapse
I'm using a SPIGEN Ultra Air case. Doesn't seem to be disturbing the ZaggShield at all.
I work for bestbuy so I get the shields for like. 10 bucks. Love the HD ones.
Sent from my SAMSUNG-SGH-I747 using xda premium
This screen protector is beautiful. And the good thing about zagg is every 3 months or so they have a 50% off sale. However you could cause a rip in yours send it back to zagg and they will replace it no questions asked..
Lifetime warranty...
The original zagg is a LOT stronger but not as sexy... This hd version feels a lot better!
Sent from my SAMSUNG-SGH-I747 using xda premium
Started as a kickstarter for an ultra durable screen protector. I can't even tell it's there, but it is thicker than the average protector - I can feel it on the edges.
Everyone keeps telling me to put it to the test, see if it really lives up to the demo videos on the site. I'm not sure I want to risk actually breaking my One in any way... Sorry. Maybe next time my brother asks, I'll tell him he can test it for me if he pays for any repairs needed
http://www.evolutivelabs.com/rhinoshield/
The screen protector feels as smooth as the glass under it, doesn't hamper the capacitive buttons on the bottom (yes, it covers them and yes I have the update that made them more sensitive), and the protector went on very easy. Bubbles were no problem to squeeze out, I don't even have any micro bubbles lingering anywhere.
Also, early adopters seem to be eligible for an improved version free in July - not sure if this only applies to kickstarter backers or not.
Sent from my HTCONE using xda app-developers app
gk1984 said:
Started as a kickstarter for an ultra durable screen protector. I can't even tell it's there, but it is thicker than the average protector - I can feel it on the edges.
Everyone keeps telling me to put it to the test, see if it really lives up to the demo videos on the site. I'm not sure I want to risk actually breaking my One in any way... Sorry. Maybe next time my brother asks, I'll tell him he can test it for me if he pays for any repairs needed
http://www.evolutivelabs.com/rhinoshield/
The screen protector feels as smooth as the glass under it, doesn't hamper the capacitive buttons on the bottom (yes, it covers them and yes I have the update that made them more sensitive), and the protector went on very easy. Bubbles were no problem to squeeze out, I don't even have any micro bubbles lingering anywhere.
Also, early adopters seem to be eligible for an improved version free in July - not sure if this only applies to kickstarter backers or not.
Sent from my HTCONE using xda app-developers app
Click to expand...
Click to collapse
Thanks for posting this, I'm not contented with the screen protector that came with my Otterbox Commuter.
Sent from my HTC_PN071
I was also looking up these protectors.
Two things worry me though:
Its only what.. 4H hardness? Not nearly as hard as GG. Let me (well, us) know if yours gets scratched up soon...
They've had issues with "denting" and "peeling." A mk. 2 version is in the works and all owners of mk. 1 will get a free replacement (I have this in writing from them via Kickstarter).
So I might either buy it soon or wait for mk. 2 to be released to avoid the trouble.
They make them look really tough in their demos. I didn't realize it was a 4H hardness, but I also don't know what gorilla glass is rated at to compare with. And yes, I did get a letter saying I'm getting the mk2 version too.
I'll share my experiences with it. 2 days and not a mark on it so far. I keep forgetting it's even on there until I feel the edges.
Sent from my HTCONE using xda app-developers app
gk1984 said:
They make them look really tough in their demos. I didn't realize it was a 4H hardness, but I also don't know what gorilla glass is rated at to compare with. And yes, I did get a letter saying I'm getting the mk2 version too.
I'll share my experiences with it. 2 days and not a mark on it so far. I keep forgetting it's even on there until I feel the edges.
Sent from my HTCONE using xda app-developers app
Click to expand...
Click to collapse
It is very tough from what I understand. From an impact point of view anyway.
But its 4H compared to GG which is reported to be around 7H. SGP's Glas.t and Glas.tr are 8H (but not impact-resistant).
Glad to hear you have no scratches so far. Supposedly oleophobic coatings also help prevent scratches (at least it does according to Corning's demonstrations of coated vs uncoated gorilla glass) So hopefully that will help as well.
Looking forward to your future impressions, may or may not buy this soon. To-date, I've never dropped and cracked a screen (except the one time I got pissed and threw my phone at the wall...). Hopefully I'm not jinxing myself lol.
Well... 4 days with my Rhino Shield and I'm starting to see what looks like a layer of material rippling slightly. It's near one edge that I think messed up putting it on (it's not sticking too well, I accidentally slid a rough edge there under the adhesive). It's only noticeable in harsh glare though, still prefer this to micro bubbles I've had in other protectors.
Still no scratches or other imperfections - the ones showing up are likely my own fault.
Sent from my HTCONE using xda app-developers app
Looks interesting but I'll wait for the next gen to come out. I never like getting in on the ground floor of anything
Sent from my HTC One using Tapatalk 4 Beta
I'm in the market for a new screen protector. I'm stuck between a cheapo off amazon, a glas.tr and this. This seemed to be the best option until I read this:
Scratch Proof
Special coating technology provides strong hardness of up to 3H thereby preventing direct scratch damage to your screen.
Click to expand...
Click to collapse
Gorilla glass is way harder than that, and glas.tr is way way harder than that. I am gonna use a TPU case, so impact resistance isn't as important to me as feel and scratch resistance. As others have said, I'd like to hear how this fares over time.
How to buy
When Im promoted to buy the rhino shield.I must sign to pay some company that represents rhino for a contract of a year ?
What is that?