I am having a big problem with my GIO. I flashed Enhanced236 and whenever i want to connect to my wireless or switch to phone data, i always have to restart to make them work.
For wireless : If i had data on and when i got home, i have wireless router, so i can disable data. But, when i do that, i get the same message over and over again : Obtaining ip from ...
For data : If i had wireless on, i can`t switch to data. The phone option says it`s on, but it actually isn`t...
And another thing : when i enable Airplane mode, it does nothing --> actually it does, it turns off my wireless, and after i turn Airplane mode off, i can`t call anyone...and it doesn`t end the call
It`s driving me crazy !!!
Please help me, especially coccolino_dbro (maybe u can pm your Y!M id - i am from Romania too)
I can't reproduce any of these behaviours; all works fine here, including calling after I had Airplane mode activated. Have you formatted & wiped data during installation? Also, if you have formatted, did you by any chance restored some apps & settings with Titanium?
You can try to do a wipe data/factory reset in CWM and see if that fixes it.
It's common when you flash new custom ROM, to do a wipe data/factory default in CWM. Some ROM does not need that (for example SGS2 port), but more preferred that you do
do you activate airplane mode from notification bar or from setting menu?
I always do a factory reset, wipe cache partition, wipe dalvik before i install a new rom. I usually use Titanium Backup, but that was the first time i`ve flashed your rom, but the second time (after i`ve did factory reset, etc) i didn`t install TB and tried to activate wireless the first time it started (usually when u first start your phone, data is on), but the wireless didn`t start...stuck at obtaining ip. After a quick restart, all worked fine with the wifi, but when i left home and tried to deactivate wifi and switch to data, data wouldn`t connect....it said that it is on, but when i tried to browse or use Google Play, connection error.
Let me show you what i did :
1. i downloaded your rom.
2. i formated my ext to be ext4
3. i did a factory reset, wipe cache partition, wipe dalvik from recovery (CWM)
4. i flashed your rom (tried the full installation)
5. i did a factory reset, wipe cache partition, wipe dalvik from recovery (CWM)
6. the phone started, tried what i said before...
PS : i activated the airplane mode in notification bar with wireless on, and all it did was disable wireless, the signal bar was still at 4 lines and i couldn`t call
Related
Hi,
I've got a strange problem: i've tried to install severla Sense ROMs (sensevolution, revolution 4.0, now RunnymedeMod007) and each time phone crashes. It's going perfectly fine until i type PIN code. Than in some cases ROM works, until i press off button. While i want to wake phone again, there's nothing on the screen, except wallpaper. No upper bar, no menu bar. And the fone freezes - every time i have to take the battery off. what might it be? I've changed the radio, but nothing changed.
hilaran said:
Hi,
I've got a strange problem: i've tried to install severla Sense ROMs (sensevolution, revolution 4.0, now RunnymedeMod007) and each time phone crashes. It's going perfectly fine until i type PIN code. Than in some cases ROM works, until i press off button. While i want to wake phone again, there's nothing on the screen, except wallpaper. No upper bar, no menu bar. And the fone freezes - every time i have to take the battery off. what might it be? I've changed the radio, but nothing changed.
Click to expand...
Click to collapse
Depending on what recovery you use, the options might change. But:
Mounts & Storage
> format boot
> format system
> format data
> format cache
Advanced
> Wipe dalvic cache
Flash ROM again.
Worked perfectly, thanks a lot!
Hello guys.
I have an original note 3 (no root, no kernel no recovery, stock note 3). I have the polland rom.
Until today the phone works correctly; during last week i reboot the telephone removing battery 2 times (the phone was freezed).
Today after a freeze i removed the battery and turning on the phone again but the phone remain in a bootloop.
i try with a cache wipe but with no result.
Removing SD card, sim card and putting it on airplan mode the phone reboot after 30 seconds (instead of 5 seconds).
But now, how can i backup my personal data!?
There is a way?
thanks in advance
khael
Khael said:
Today after a freeze i removed the battery and turning on the phone again but the phone remain in a bootloop.
But now, how can i backup my personal data!?
There is a way?
Click to expand...
Click to collapse
Pulling the battery with files open can corrupt the file system. Your 'data' partition is probably corrupt, and these are the files you want to recover. If you can use ADB and mount '/data' without root access then you can recover some of the files by copying them to the host computer, but you might corrupt that host computer.
To simply fix your device I think you must do a factory data reset.
Frank
thanks for your suggestion!
I'll try!
Khael said:
thanks for your suggestion!
I'll try!
Click to expand...
Click to collapse
Today i try also a new original battery without success.
And i can't save data with ADB :/
Update:
there is an issue on the wifi module.
Turning it off, the phone doesn't reboot. Problem is that there is something that turn on it automatically!
The phone is in airplane mode.
When phone boot up, i fastly turn off wifi and until that it turn on doesn't reboot.
But then automatically turn on i can't disable it because it reboot to fast.
Do u have any suggestion?
i really need backup of some data files....
Khael said:
Update:
there is an issue on the wifi module.
Turning it off, the phone doesn't reboot. Problem is that there is something that turn on it automatically!
The phone is in airplane mode.
When phone boot up, i fastly turn off wifi and until that it turn on doesn't reboot.
But then automatically turn on i can't disable it because it reboot to fast.
Do u have any suggestion?
i really need backup of some data files....
Click to expand...
Click to collapse
As mentioned above, the user is correct, do a factory reset. Should clear the issues.
Good Luck
Äx
hello guys.
Unfortunately isn't enough a factory reset (
After 1 day i have the same problem and so i proceded to:
1) wipe data and cache
2) flash last original firmware with odin
3) new wipe data and cache
Now it's works correctly...
Thanks for your help anyway
Hello,
today my phone start in to a bootloop again.
But on first time reboot on safe mode. I turn off wifi and try installing avg and avira....but without result.
Do u have any suggestione?
is possibile to check some logs and discover problems?
Thanks in advance
Khael
Hello,
I'm having issues with my M8 after a ROM install went south. I have an HTC M8 on Rogers, SuperCID, Rooted and S-OFF. The ROM I was using (CandyROM) locked up requiring a hard boot. After the hard boot it wouldn't go past the boot screen. I decided to reflash (dirty) and so my dire issues began.
First reboot > no change hung on bootscreen
-reboot into recovery > Factory Reset > reinstall ROM > booted directly to desktop > no-wifi no data connection
-at this time started getting write errors to DATA and unable to mount storage red errors in TWRP
-WIPE DATA > install ROM > boots to activation but after choosing country no cellular activation screen just goes to WIFI > cannot connect
-try this for hours FINALLY get a cellular screen at activation but cannot to the service "at this time" (no outages) > finish activation, go to bed very sleepy man.
-Wake up all apps reinstalled but now the data connection just turns on for a sec then off for a few then on and off and soo on.
-Flash RUU > no change.
-try a wipe and activate again but now I am back to the red data errors in TWRP and the device boots right to the homescreen not even an option to activate. (using the latest Banks GAPPS as well)
-I have tried flashing with and without GAPPS and now will try another rom.
Please help, how the heck do I get this thing back up and running, been flashing for years and have never had this much frustrations. Please let me know if there is info you need I have missed.
TIA.
Hello everyone,
Yesterday, after I tried to charge my LG G4, it stopped booting properly: it seems to boot "normally" under the hood, except that the system UI is not properly loading so instead I get a black screen and a message "Unfortunately system UI stopped working". If I click "ok", it comes back within two seconds (the screen stays black apart from the error message). I cannot do anything, like unlock the phone or access anything on it, despite the fact that I can hear notifications coming in.
Unfortunately phone is not rooted, developper mode isn't enabled, and I don't have a custom recovery. I would do a factory reset if it weren't for my Google Authenticator codes, some of which I haven't properly backed up like an idiot. Thus I was wondering what I could do to back up my phone or solve the issue.
Here is what I've already tried:
Press down VOLUME DOWN + POWER to enter recovery mode, but since I don't have custom recovery this only gives me the option to do a hard factory reset and lose all my data.
Use adb commands to access my phone, but I get "unauthorized device" because I haven't enabled developper tools on the phone.
Use the app "LG Bridge" on my mac, but it also doesn't work for the above reason.
I see three possibilities, but I don't know whether any is genuinely doable:
Solve the issue of the error message, which from what I've read requires me to wipe the cache. But how to do that without custom recovery?
Somehow bypass the UI to unlock the phone and unable developer tools
Manage to backup the phone from my computer while its locked without developper tools enabled.
Note that obviously this is my phone, I know my passwords, I have access to my Google account, etc.
Any help would be greatly appreciated, without my Google Authenticator data I'll be locked out of an important email account.
satiricon22 said:
Hello everyone,
Yesterday, after I tried to charge my LG G4, it stopped booting properly: it seems to boot "normally" under the hood, except that the system UI is not properly loading so instead I get a black screen and a message "Unfortunately system UI stopped working". If I click "ok", it comes back within two seconds (the screen stays black apart from the error message). I cannot do anything, like unlock the phone or access anything on it, despite the fact that I can hear notifications coming in.
Unfortunately phone is not rooted, developper mode isn't enabled, and I don't have a custom recovery. I would do a factory reset if it weren't for my Google Authenticator codes, some of which I haven't properly backed up like an idiot. Thus I was wondering what I could do to back up my phone or solve the issue.
Here is what I've already tried:
Press down VOLUME DOWN + POWER to enter recovery mode, but since I don't have custom recovery this only gives me the option to do a hard factory reset and lose all my data.
Use adb commands to access my phone, but I get "unauthorized device" because I haven't enabled developper tools on the phone.
Use the app "LG Bridge" on my mac, but it also doesn't work for the above reason.
I see three possibilities, but I don't know whether any is genuinely doable:
Solve the issue of the error message, which from what I've read requires me to wipe the cache. But how to do that without custom recovery?
Somehow bypass the UI to unlock the phone and unable developer tools
Manage to backup the phone from my computer while its locked without developper tools enabled.
Note that obviously this is my phone, I know my passwords, I have access to my Google account, etc.
Any help would be greatly appreciated, without my Google Authenticator data I'll be locked out of an important email account.
Click to expand...
Click to collapse
Well at least you can backup your phone in download mode with SALT ( https://bit.do/SALTatXDA ) but restoring is another story.
Sent from my LG-H815 using XDA Labs
Thanks a lot for your reply! I'll try backing up with SALT tonight. There are two things I'm wondering:
How do you think I could extra data from the backup?
Will I be able to wipe the cache or enable usb debugging with SALT? That might solve the issue.
satiricon22 said:
Thanks a lot for your reply! I'll try backing up with SALT tonight. There are two things I'm wondering:
How do you think I could extra data from the backup?
Will I be able to wipe the cache or enable usb debugging with SALT? That might solve the issue.
Click to expand...
Click to collapse
You can mount the userdata partition on Linux (e.g in FWUL) and then browse through it like it's on your phone.
You can wipe the cache paetition in SALT yes. It's in the advanced menu there (erase partitions -> select cache and only that). It will not wipe the dalvik cache though.
I dunno about the USB debugging though. Maybe there is a way but if so you would need a very unrestricted download mode (depends on model and firmware). And the whole process is not easy.
It requires again SALT and there you have in the advanced menu the option to open a shell.
Here you can mount userdata with
mount /data
But it's usually mounted already. Then it's a try and error. You could e. G. try to delete the dalvik cache etc.
Sent from my LG-H815 using XDA Labs
steadfasterX said:
You can mount the userdata partition on Linux (e.g in FWUL) and then browse through it like it's on your phone.
You can wipe the cache paetition in SALT yes. It's in the advanced menu there (erase partitions -> select cache and only that). It will not wipe the dalvik cache though.
I dunno about the USB debugging though. Maybe there is a way but if so you would need a very unrestricted download mode (depends on model and firmware). And the whole process is not easy.
It requires again SALT and there you have in the advanced menu the option to open a shell.
Here you can mount userdata with
mount /data
But it's usually mounted already. Then it's a try and error. You could e. G. try to delete the dalvik cache etc.
Sent from my LG-H815 using XDA Labs
Click to expand...
Click to collapse
Hi!
I've found out that the Google Auth keys are in /data/data/com.google.android.apps.authenticator2/databases/databases. So I need to backup /data/. However, when I show the list of partitions with SALT, I don't see /data/. Is there a way to backup /data/ on my unrooted device?
Secondly, I haven't managed to wipe the dalvik cache with the command shell, would you be able to point me in the right direction?
Thank you so much!
Hello
I have this problem, I wipe all my data, I log out in all my Google account, I have the last update when I wipe all data, and now when I try to configure the phone I can't get out to " Checking information " he pull me back. in all options I select.
I don't know what things to do now, I can't use anymore