I just need a link or some information on how to install cyanogenmod 9 from EL29, I'm currently running Calkulin's EL29 v3.0, and then I was wondering how do I come back from ICS without bricking?
I'd appreciate the response so i don't screw up my wonderful new phone! ^^
Sent from my SPH-D710 using XDA
Always check stickies.
http://forum.xda-developers.com/showthread.php?t=1525495
Nabbu said:
I just need a link or some information on how to install cyanogenmod 9 from EL29, I'm currently running Calkulin's EL29 v3.0, and then I was wondering how do I come back from ICS without bricking?
I'd appreciate the response so i don't screw up my wonderful new phone! ^^
Sent from my SPH-D710 using XDA
Click to expand...
Click to collapse
http://e4gtcm.blogspot.com/p/cm9-install-guide.html?m=1
To go back to GB just flash the EL26 kernel with CWM through Odin. When rebooting hold power + volume up until it boots into recovery and flash from there.
Sent from my SPH-D710 using Tapatalk 2 Beta-6
FYI - OP on the CM9 page for the rom the very first post has it notated that for the CM9 install guide which is the link that has been posted above. I commend you on being careful but just so you know this forum has more than enough info in it to ensure you do everything correct and minimize your chances of bricking..
http://e4gtcm.blogspot.com/p/cm9-install-guide.html?m=1
http://forum.xda-developers.com/showthread.php?t=1525495
http://forum.xda-developers.com/showthread.php?t=1504808
Just a few links which have helped me stay away from issues to date..
nitro_c4 said:
http://e4gtcm.blogspot.com/p/cm9-install-guide.html?m=1
To go back to GB just flash the EL26 kernel with CWM through Odin. When rebooting hold power + volume up until it boots into recovery and flash from there.
Sent from my SPH-D710 using Tapatalk 2 Beta-6
Click to expand...
Click to collapse
I've heard to odin just the el26 kernel + cwm and also the whole el26 rom before flashing ICS, more specifically the AOsP variations so which is it? Or which is safer? It would kind of make sense to Odin the whole rom to restore a gb nandroid. There's just so many conflicting methods its cornfuzzling
Sent from my SPH-D710 using xda premium
-EViL-KoNCEPTz- said:
I've heard to odin just the el26 kernel + cwm and also the whole el26 rom before flashing ICS, more specifically the AOsP variations so which is it? Or which is safer? It would kind of make sense to Odin the whole rom to restore a gb nandroid. There's just so many conflicting methods its cornfuzzling
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
No not really conflicting if you look at them slowly. Its basically get back to a GB kernel at the end of the day. They say to odin it since you do not want to or have any other way to get a GB kernel on your phone if you are on ICS. Now you could flash from ICS but that is what people are trying to avoid since it could cause a brick.
Basically: When on ICS
1. Odin a GB CWM recovery(now others have used EL29 and Rogue recoveries as well) I personally use a stock CWM recovery from CM7 and Miui
2. From there you can wipe and flash and do nandroids as normal.
Option: Safest bet
1. One Click Odin your choice of any of the GB stock roms by sfhub
I have used both methods so far with no problems. I had CM9 on my phone then used odin to go back to the recovery used with CM7 and then I nandroid back my UnNamed Rom. I did this a few times without issue. I have never heard of any issues with anyone using any of the above two methods I mentioned. If someone has please inform us
playya said:
No not really conflicting if you look at them slowly. Its basically get back to a GB kernel at the end of the day. They say to odin it since you do not want to or have any other way to get a GB kernel on your phone if you are on ICS. Now you could flash from ICS but that is what people are trying to avoid since it could cause a brick.
Basically: When on ICS
1. Odin a GB CWM recovery(now others have used EL29 and Rogue recoveries as well) I personally use a stock CWM recovery from CM7 and Miui
2. From there you can wipe and flash and do nandroids as normal.
Option: Safest bet
1. One Click Odin your choice of any of the GB stock roms by sfhub
I have used both methods so far with no problems. I had CM9 on my phone then used odin to go back to the recovery used with CM7 and then I nandroid back my UnNamed Rom. I did this a few times without issue. I have never heard of any issues with anyone using any of the above two methods I mentioned. If someone has please inform us
Click to expand...
Click to collapse
I was more confused about whether to Odin(mobileodin) just the kernel + cwm or the entire rom, all the install instructions say Odin kernel with cwm(usually el26) which is what I'm using for ics, I use rogue gunslinger for GB, but then I've seen ppl say to Odin the entire rom before restoring/upgrading/changing roms so i was like
Wtf which is it do I Odin the kernel or the whole rom when i upgrade :-| I've been trying to figure that out for a cpl days b4 I upgrade my AOKP to build 31, cuz I really don't want a paperweight
Sent from my SPH-D710 using xda premium
-EViL-KoNCEPTz- said:
I was more confused about whether to Odin(mobileodin) just the kernel + cwm or the entire rom, all the install instructions say Odin kernel with cwm(usually el26) which is what I'm using for ics, I use rogue gunslinger for GB, but then I've seen ppl say to Odin the entire rom before restoring/upgrading/changing roms so i was like
Wtf which is it do I Odin the kernel or the whole rom when i upgrade :-| I've been trying to figure that out for a cpl days b4 I upgrade my AOKP to build 31, cuz I really don't want a paperweight
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
I've searched around and I don't know how to just odin a kernel, so I use sfhubs one-click back to el26 then I use autoroot to install el26 +cwm.
I would like to just odin a kernel and flash from there, but i am unsure of the procedure, do you do this:
phone to download mode and connect to odin, use PDA slot and browse to kernel, hit start or GO or whatever it is, then when it starts to reboot, pwr+vlm up to get into recovery, then get my flash on from there?
I use mobile Odin for the kernel alone but I believe in PC Odin you can just select PDA and choose the kernel. Tar and flash it that way then when it starts to reboot either catch the volume up + power on the splash screen or do like I do and snatch the battery real quick and the boot to recovery, everytime I try to hit it while its rebooting Im too slow
Sent from my SPH-D710 using xda premium
-EViL-KoNCEPTz- said:
I use mobile Odin for the kernel alone but I believe in PC Odin you can just select PDA and choose the kernel. Tar and flash it that way then when it starts to reboot either catch the volume up + power on the splash screen or do like I do and snatch the battery real quick and the boot to recovery, everytime I try to hit it while its rebooting Im too slow
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
I havent used mobile odin, but I hear nothing but good things, so I think I am gonna grab it and try it out. That way I wont need to be at a PC to get my flash on.
With mobile odin, do I keep the kernel on my sdcard, same place I put roms and such? And when using mobile odin, if the file is *.tar.md5, do I remove the .md5 from the file name first? Do I use the flash firmware option?
I've done this at least 25 times recently; so easy, I'll post instructions here again.
1. get Mobile Odin(time saver to the max)
2. Get EL26 kernel (TAR version)
3. flash EL26 kernel in Mobile Odin (takes 10 seconds)
4. Boot into recovery(you will have the proper one now!)
5. Flash away
if you do this either coming from A GB rom to ICS, or going back to one, Guaranteed success...
Simple as can be; not sure why this keeps getting asked.....
The kernel is 8.1 mb, which exceeds the attachment size, so I can't post it here, but its all over this forum..
krook250 said:
I havent used mobile odin, but I hear nothing but good things, so I think I am gonna grab it and try it out. That way I wont need to be at a PC to get my flash on.
With mobile odin, do I keep the kernel on my sdcard, same place I put roms and such? And when using mobile odin, if the file is *.tar.md5, do I remove the .md5 from the file name first? Do I use the flash firmware option?
Click to expand...
Click to collapse
Yea u can keep em in a folder on internal SD that's what I do and just open the location it will find all tar files in that location then just select and follow directions, mOdin works really good its quick and no flash counter in crease or yellow triangle. Its alot easier to flash ics than having to go to the PC cuz u can just Odin el26+cwm kernel boot to recovery and get ur flash on without all the hassle of drivers and connecting a USB etc
Sent from my SPH-D710 using xda premium
-EViL-KoNCEPTz- said:
Yea u can keep em in a folder on internal SD that's what I do and just open the location it will find all tar files in that location then just select and follow directions, mOdin works really good its quick and no flash counter in crease or yellow triangle. Its alot easier to flash ics than having to go to the PC cuz u can just Odin el26+cwm kernel boot to recovery and get ur flash on without all the hassle of drivers and connecting a USB etc
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
sweet thanks, gonna grab the app and go grab the kernel as well. can't wait!!!
If I just cut my 30 min. flashing time down to 10 mins, that means I can flash 3x more, frick yeah!! Now I just need the new cna to drop so I can flash that girl.
wase4711 said:
I've done this at least 25 times recently; so easy, I'll post instructions here again.
1. get Mobile Odin(time saver to the max)
2. Get EL26 kernel (TAR version)
3. flash EL26 kernel in Mobile Odin (takes 10 seconds)
4. Boot into recovery(you will have the proper one now!)
5. Flash away
if you do this either coming from A GB rom to ICS, or going back to one, Guaranteed success...
Simple as can be; not sure why this keeps getting asked.....
The kernel is 8.1 mb, which exceeds the attachment size, so I can't post it here, but its all over this forum..
Click to expand...
Click to collapse
My question was for when going back to gb from ics if I needed to Odin the whole rom, I had seen both kernel+cwm only and whole rom and just wanted to make sure if I just flashed the kernel only I'd be OK more for clarification than an actual how to for me since I know how to Odin both, just wanted to make sure I was odining the right things b4 I jumped and landed on a brick after I had seen someone say to Odin the whole rom I wanted to be sure I was doing it right since I had seen both ways mentioned. Its a little more confusing than my damn evo where I'm always on the same recovery no matter what, and a bit scary with the bricks flying around like a construction site filled with monkeys on meth
Sent from my SPH-D710 using xda premium
-EViL-KoNCEPTz- said:
My question was for when going back to gb from ics if I needed to Odin the whole rom, I had seen both kernel+cwm only and whole rom and just wanted to make sure if I just flashed the kernel only I'd be OK more for clarification than an actual how to for me since I know how to Odin both, just wanted to make sure I was odining the right things b4 I jumped and landed on a brick after I had seen someone say to Odin the whole rom I wanted to be sure I was doing it right since I had seen both ways mentioned. Its a little more confusing than my damn evo where I'm always on the same recovery no matter what, and a bit scary with the bricks flying around like a construction site filled with monkeys on meth
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
[email protected] monkeys on Meth!!!
Yeah, flashing with this phone is different from the htc stuff, but once you get the hang of it, its just as easy!
wase4711 said:
[email protected] monkeys on Meth!!!
Yeah, flashing with this phone is different from the htc stuff, but once you get the hang of it, its just as easy!
Click to expand...
Click to collapse
Yea ur post cleared it up for me, just gets confusing when. Theres multiple methods recommended I was 99% sure I just needed to Odin the kernel only but wanted the clarification before I jumped off that bridge, not too comfortable jumping off a bridge when I'm not sure how deep the water is
Sent from my SPH-D710 using xda premium
well, like the asshole who pushed me in the deep end of the pool when I was 12 and didn't know how to swim told me, "figure it out or else", sometimes you gotta just go for it!!
Actually, I am nervous too when I try something new the first time, but, once you figure out who really knows what they are talking about, its easy to just pm them and ask them how they do it..
You obviously know your stuff man, so you will be an expert with this phone in no time!!
I did this going from Blazer 4.1 to CM9 with out any issues.
wase4711 said:
I've done this at least 25 times recently; so easy, I'll post instructions here again.
1. get Mobile Odin(time saver to the max)
2. Get EL26 kernel (TAR version)
3. flash EL26 kernel in Mobile Odin (takes 10 seconds)
4. Boot into recovery(you will have the proper one now!)
5. Flash away
if you do this either coming from A GB rom to ICS, or going back to one, Guaranteed success...
Simple as can be; not sure why this keeps getting asked.....
The kernel is 8.1 mb, which exceeds the attachment size, so I can't post it here, but its all over this forum..
Click to expand...
Click to collapse
Quick question.. I can flash EL26 kernel again in mobile odin and should be able to restore my Blazer backup without any issues, correct? Blazer was backed up using Rogue EL29 kernel. Thanks!
Plus there's 5 android devices in my house all with different flashing methods it gets confusing keeping em all straight, got the evo4g, et4g, kindle fire, MoPho, and a gNote the et4g is the first Sammy I've used with Odin, my first android was an intercrap I mean intercept and it used the patched swupdater instead of Odin, so I'm still getting the hang of this method. I can flash the evo, kindle, intercept and photon blindfolded and drunker than a slut on prom night
Sent from my SPH-D710 using xda premium
Nico^APEX said:
I did this going from Blazer 4.1 to CM9 with out any issues.
Quick question.. I can flash EL26 kernel again in mobile odin and should be able to restore my Blazer backup without any issues, correct? Blazer was backed up using Rogue EL29 kernel. Thanks!
Click to expand...
Click to collapse
yes sir, that is correct!
---------- Post added at 04:03 PM ---------- Previous post was at 04:01 PM ----------
-EViL-KoNCEPTz- said:
Plus there's 5 android devices in my house all with different flashing methods it gets confusing keeping em all straight, got the evo4g, et4g, kindle fire, MoPho, and a gNote the et4g is the first Sammy I've used with Odin, my first android was an intercrap I mean intercept and it used the patched swupdater instead of Odin, so I'm still getting the hang of this method. I can flash the evo, kindle, intercept and photon blindfolded and drunker than a slut on prom night
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
I don't know how you keep all that **** straight; in my house, we ALL go with one "brand" of product, just to avoid that nightmare!!
If someone doesn't like it, I tell them that they get no tech support from me if they don't go with "the flow"!
OK! I am so scared to be flashing an ICS rom but I want to take the plunge now, I am on Calkuins E4GT 2.9.2 rom and want to flash AOKP, what must I do before I flash? I also want to know what I have to do to restore back to this rom say if I don't like ICS?
Can you please include the links to anything I need? Thanks
Darrien13 said:
OK! I am so scared to be flashing an ICS rom but I want to take the plunge now, I am on Calkuins E4GT 2.9.2 rom and want to flash AOKP, what must I do before I flash? I also want to know what I have to do to restore back to this rom say if I don't like ICS?
Can you please include the links to anything I need? Thanks
Click to expand...
Click to collapse
Make a nandroid backup. Then Odin the stock EL26 build with CWM recovery. From there you can go to AOKP. And use Calkulin's Format All to do the wiping if you use CWM to flash anything.
First off, read this so you know what mistakes not to make:
http://forum.xda-developers.com/showthread.php?t=1525495
Here's the link for EL26:
http://forum.xda-developers.com/showthread.php?t=1416477
And for AOKP:
http://forum.xda-developers.com/showthread.php?t=1514665
If you don't like ICS and want to revert back to what you had just Odin One-Click EL26 again, use the Auto Root Package to install CWM and restore the nandroid in recovery. If you do any wiping in recovery mode use Calkulin's Format All. It's much safer than manually wiping.
The link for the AOKP build has a really good how-to included with it. Takes you step by step through it.
Okay I have a question? Why do we have to Odin back to el26? why not EL29? Just wondering thats all...
davidstjohn1 said:
Okay I have a question? Why do we have to Odin back to el26? why not EL29? Just wondering thats all...
Click to expand...
Click to collapse
Because el26 has the clockwork recovery you need
Sent from my SPH-D710 using XDA
davidstjohn1 said:
Okay I have a question? Why do we have to Odin back to el26? why not EL29? Just wondering thats all...
Click to expand...
Click to collapse
Ya it has CWM5 on it that's be shown to be the safest to flash over to ICS. A lot of people ended up with bricked phones to discover that, lol.
I've flashed many times from EL29. It's flashing back that kills it. Wrong partition or something. Going forward is fine. Use Calk's Format all. And try not to restore data. It sometimes breaks things.
I think the issue is that you want to be using a certain version of CWM, and not any other recoveries like Rogue builds (no offense). That being said, I have flashed ICS from EL29 plenty of times. Get Mobile Odin Lite and our flash kernel from XDA (only available from XDA). Get the CWM EL26 kernel that everyone is using. Mobile Odin the kernel and hold the power button and up volume on reboot. It isn't much different or take much longer than rebooting into recovery.
Darrien13 said:
OK! I am so scared to be flashing an ICS rom but I want to take the plunge now, I am on Calkuins E4GT 2.9.2 rom and want to flash AOKP, what must I do before I flash? I also want to know what I have to do to restore back to this rom say if I don't like ICS?
Can you please include the links to anything I need? Thanks
Click to expand...
Click to collapse
Honestly OP there are stickys and instructions in every thread on how to do these things safely and (no offense) but if those were not enough and you still had to make a thread to ask again.... Maybe just maybe you should chill till they come up with a solid no problems method. I believe MeWarning gave you a lot of info as well as a few others.
Also they say to use EL26 but it seems that all recoveries EL29 and lower can be used with out issue. I would follow what the masses are doing though and not question too much especially if you are afraid....IMHO
Cut and dry as long as you flash and do everything you need too out of a GB kernel and CWM you will be ok..
playya said:
Honestly OP there are stickys and instructions in every thread on how to do these things safely and (no offense) but if those were not enough and you still had to make a thread to ask again.... Maybe just maybe you should chill till they come up with a solid no problems method. I believe MeWarning gave you a lot of info as well as a few others.
Also they say to use EL26 but it seems that all recoveries EL29 and lower can be used with out issue. I would follow what the masses are doing though and not question too much especially if you are afraid....IMHO
Cut and dry as long as you flash and do everything you need too out of a GB kernel and CWM you will be ok..
Click to expand...
Click to collapse
I wouldnt use an el29 rogue repack to flash any aosp ics roms, might be safe for TW ics but aosp all recommend el26+cwm5 because that was the last build with stock cwm actually baked into the kernel and is the safest for flashing aosp ics. Mobile Odin and el26+cwm are 2 good items to keep on your SD card for flashing ics its quick and easy and doesn't take much longer to flash using that method than just booting to baked in recovery to flash
Sent from my SPH-D710 using xda premium
Hello everyone, I'm a new to the et4g , i just came from an evo 3d a few weeks ago. Right now I'm a running calks latest fd26 with the help of acs test recovery. I've been searching spool over the threads but can not find links for any of the custom recoveries. So what i would like to know is what do you think is the best recovery in your opinion and if you can drop links/point me in the right direction thanx!
Sent from my SPH-D710 using xda premium
You should NOT be using custom recovery in ICS if you are not absolutely certain how it all works. I know that the Calk's 1.5 FD26 kernel came with one but if you use it incorrectly, you will have a very nice paperweight.
The only recovery that is recommended while on ICS is the STOCKCWM-EL26.TAR recovery that you can get here and it should be flashed from Odin:
http://chris41g.devphone.org/index.php?dir=EpicTouch/Stock+Repack/EL26/
Thank you, i have read that about it could cause many problems but wasn't sure which could be used
Sent from my SPH-D710 using xda premium
kazp3r17 said:
Thank you, i have read that about it could cause many problems but wasn't sure which could be used
Click to expand...
Click to collapse
If you were on Gingerbread it wouldn't matter. But, you're using ICS so it makes a huge difference.
Since you are on Calk's 1.5 like me, I will try to tell you how to use the built-in recovery as safely as possible with the FD26 kernel.
I use the recovery to backup or restore the FD26 rom only while I am using it! (Do NOT use it to flash another rom or restore a different version of Android, if you plan on going to a different rom, see below!) You can do other simple stuff that won't harm anything like wipe cache and davlik too.
If you plan on flashing a different kernel or modem, use ODIN:
If you plan on going to a different ROM, use ODIN to flash the EL26 stock recovery I gave you a link for.
Once you flash the EL26, you will no longer be able to boot into ICS, so be prepared and have the ROM you want to flash (with EL26) already downloaded to the phone. Always wipe manually or use Calkulin's 'format all' before flashing a rom.
If you are not certain about using the EL26 recovery or get stuck in some other way, just use this easy guide I wrote to bring you back to stock rooted with CWM recovery:
http://forum.xda-developers.com/showpost.php?p=24158551&postcount=9980
Edit: Corrected link posted above. Thanks.
Just rooted phone using Odin el29 plus root now I would like to flash an ics ROM AOKP I need to know the latest method to get clock work mod on phone please help,,, please dying for a piece of ice cream
Sent from my SPH-D710 using xda app-developers app
Search for autoroot + cwm.. would link it but mobile atm..
Sent from my SPH-D710
kennwoodkenn said:
Just rooted phone using Odin el29 plus root now I would like to flash an ics ROM AOKP I need to know the latest method to get clock work mod on phone please help,,, please dying for a piece of ice cream
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
For starters you can use this gb kernel that will directly boot into cwm (won't boot system until something is flashed over it) : here
Then I suggest reading about some of the options available to kernel/recoveries that are safe to use to wipe/backup/restore once in ICS.
New and Need Your Help. Thank you.
Hello. I am brand new to this, but can follow directions really well. I Rooted my Galaxy S II EL29 w/o a problem and followed the directions here... http://forum.xda-developers.com/showthread.php?t=1721229... to get a ROM version of ICS.
Now, my questions are (After searching through the forum for two days):
What is the BEST and SAFEST way to try and install other leaked ROMs?
I currently have 'Android system recovery <3e>'. Do you recommend something better or stick with what I have?
Also, Which ROM do you believe is the best one that comes close (w/o bugs) to the latest ICS/Jelly Bean?
P.S. ~ How can I add Beats Audio after flashing a ROM?
Thank you in advance for your prompt replies.
So you have stock rooted FF18 Rom and kernel now. You need a kernel with custom recovery to flash anything. The safest way is to go to sfhub's thread where you got ICS tar file and click on the Auto Root link in that thread. That will tell you how to add Clockwork Mod recovery to the setup you have now. It's a script you run on your pc with the phone plugged in. Pretty easy and he explains it pretty thoroughly. After you have CWM, good idea to boot into recovery and backup your phone before you go any further. Hold volume up and power at the same time and hold them until you are in recovery mode. Select backup and let it run.
Once you've done that and want to get on another ICS Rom, flash Calkulin's format all zip made especially for this phone. It will wipe everything except your sd card in the proper order and has never bricked a phone as far as I know. It will clear all your apps and data the same way flashing the FF18 tar file did so you'll have to reinstall all your apps. Get it here.
http://db.tt/sUM1uH72
When the format all its done, flash your new Rom. Wicked Sensations and Agat63's Rom are a couple of my favorites but there are several I haven't tested yet. If you want to try AOKP roms or Cyanogen Mod, better do more reading. They are different animals than the Touchwiz based roms so you have to know what you are doing with the recoveries on those.
We don't have jelly bean for this phone yet and I can't help you with beats audio except I think a couple of Mijjah's roms might have it built in. I don't think you can flash it on top of a Rom but I could be wrong. Good luck
Edit: Wicked Sensations was just updated and has a few elements from jelly bean in it. I plan on trying out over the weekend
I'll second Agats rom as a rock solid product... I also really like m'ics lately.
Sent from my SPH-D710 using xda premium
What do you suggest... Thank you.
Hello and thank you for your response.
After waiting awhile for a response decided to read and read and read more. Basically doing some more research so I DO NOT BRICK my mobile phone.
This is what I did... I flashed back to EL29 Rooted, installed Clockwork Mod recovery, and installed Team VeNuM Blue Boa v0.2. Everything seems to work fine. I did find and installed 'Beats Audio Mod' an hour ago. Oh yeah, I did do a Backup right after installing CWM.
Now, is it SAFE to flash another ICS ROM, like Wicked Sensations or Agat63's ROM, after flashing Calkulin's Format All Zip? QBKING77 stated that he recommends going back to Ginger Bread and installing CWM before flashing another ICS. He does not recommend going from ICS to ICS. What do you think about that? Also, can you send me the links that has the instructions to install the ROMS you like? Thank you.
You are doing things right by reading up and waiting until you are confident you know what to do. That's why I am more than willing to help. This stuff has all been covered but there are still plenty of new people who are tired of waiting for ICS rooting this phone recently. The Odin method QBking describes IS the safest way and I did it that way quite a few times when the leaks became available. It involves more steps and you need your pc. Since you already know how to use Odin maybe you would feel safer doing it that way. However, many of us have used the format all zip to switch ICS roms and its been done probably thousands of times with no problems. Never heard of a brick yet using it. Also keep in mind most of the custom roms such as Boa already have a custom recovery built in so you won't have to keep using Auto Root to add CWM. Good job
Hello all - Relatively new to all this. Have mostly just followed qbking77's videos and have successfully rooted, installed AGATS, and then updated to JB FK23 . My second phone is not cooperating at all and has multiple bugs. I have been able to unroot it back to stock FI27 and have now rerooted it on FI27 again successfully as well. Now I am not sure if I need to first put on some sort of custom recovery or go straight to installing JB. I think the part that got screwed up the first attempt was installing the custom recovery AGATS. First of all I really am not sure what that does/if I need it at all before I proceed with installing the JBFK23 update. Can I update to FK23 without any sort of custom recovery? Is AGATS the one I should use or CWM? This whole recovery process is what is really confusing to me and could use some more explaining! The install procedure for the custom recovery video was somewhat fuzzy to me as well. It simply said to drag the 2 files onto your phone from the PC (the AGAT FI27 repack.tar and MobileOdinLitev3.57.apk files) Where do I put them on the phone??? Any particular folder? I am comfortable with the Odin OneClick method qbking uses as far as the installing of the FK23 part, I just need some guidance about this recovery stuff...thanks in advance
notsodroid said:
Hello all - Relatively new to all this. Have mostly just followed qbking77's videos and have successfully rooted, installed AGATS, and then updated to JB FK23 . My second phone is not cooperating at all and has multiple bugs. I have been able to unroot it back to stock FI27 and have now rerooted it on FI27 again successfully as well. Now I am not sure if I need to first put on some sort of custom recovery or go straight to installing JB. I think the part that got screwed up the first attempt was installing the custom recovery AGATS. First of all I really am not sure what that does/if I need it at all before I proceed with installing the JBFK23 update. Can I update to FK23 without any sort of custom recovery? Is AGATS the one I should use or CWM? This whole recovery process is what is really confusing to me and could use some more explaining! The install procedure for the custom recovery video was somewhat fuzzy to me as well. It simply said to drag the 2 files onto your phone from the PC (the AGAT FI27 repack.tar and MobileOdinLitev3.57.apk files) Where do I put them on the phone??? Any particular folder? I am comfortable with the Odin OneClick method qbking uses as far as the installing of the FK23 part, I just need some guidance about this recovery stuff...thanks in advance
Click to expand...
Click to collapse
As far as I know you can one click straight to fk23 without being rooted. Don't use any ics kernel repacks though because the emmc bug is still enabled in them which will brick your phone. The Kuban kernel is safe, and so are any of agat's besides the repacked one. To be completely safe a lot of people just use el26 CWM to flash/wipe to be safe for sure. That's where mobile odin (requires root) comes in. You use it to flash the kernel, and boot into recovery to do whatever you need to do. So in that sense you need to be rooted. That is if you're going to use a custom recovery to flash fk23.
Sent from my SPH-D710 using xda app-developers app
FC809 said:
As far as I know you can one click straight to fk23 without being rooted. Don't use any ics kernel repacks though because the emmc bug is still enabled in them which will brick your phone. The Kuban kernel is safe, and so are any of agat's besides the repacked one. To be completely safe a lot of people just use el26 CWM to flash/wipe to be safe for sure. That's where mobile odin (requires root) comes in. You use it to flash the kernel, and boot into recovery to do whatever you need to do. So in that sense you need to be rooted. That is if you're going to use a custom recovery to flash fk23.
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
Well thanks for the quick reply...maybe I should have said I was totally new then instead of relatively new because that was pure Greek to me. I am sorry and don't mean to be rude but I have absolutely no idea what most of what you said means. I guess I'll have to blindly follow the qbking videos without really knowing what I'm actually accomplishing in each step. And isn't AGAT_FI27_repack.tar an "ics kernel repack" (from your reply above)? Why would he tell users to use that repack? And what is a kernel anyway?
Thx
Ah I see lol. Well read the e4gt wiki then.
http://forum.xda-developers.com/wiki/Samsung_Epic_4G_Touch
Sent from my SPH-D710 using xda app-developers app
FC809 said:
As far as I know you can one click straight to fk23 without being rooted. Don't use any ics kernel repacks though because the emmc bug is still enabled in them which will brick your phone. The Kuban kernel is safe, and so are any of agat's besides the repacked one. To be completely safe a lot of people just use el26 CWM to flash/wipe to be safe for sure. That's where mobile odin (requires root) comes in. You use it to flash the kernel, and boot into recovery to do whatever you need to do. So in that sense you need to be rooted. That is if you're going to use a custom recovery to flash fk23.
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
Keep reading and this will all make sense soon. Good advice, I prefer odin from pc over mobile odin.