Related
i was curious to get get android market on my kindle today.. and looked up how. i used the kindle fire utility to root it. then my KF it started to go into a loop of the boot logo. it just flashes on and flashes off over and over again.hard reset doesnt affect it at all, it wont even turn off unless i unplug it. it doesnt show up on my computer either.
i dont know if this helps but when i ran the Kf utility it said 'findstr' not recognized.. blah blah blah. and it didnt give me the 1234567 options on there. i just typed in '2' and pressed enter because thats what the video told me .-. it doesnt have a triangle, or a blue screen logo either just the kindle fire logo flashing off and on. I honestly am lost. please keep this noob friendly
i am running win 7. 64 bit.
josepho1997 said:
It seems like your stuck in fastboot mode. You need to reinstall the drivers manually and then go into KFU. Press 1(bootmode)and 1(normal). If you still want to root it, when it gets to installing fff, and if it says <waiting for device>, you need to do a hard reset and your Kindle, unplug, plug it back in, and manually install the drivers. Then it will finish rooting.
Click to expand...
Click to collapse
How do you reinstall the drivers manually? and also when i go into the kindle fire utility it doesnt give me 1,2,3,4,5,6,7 options... it just says findstr is not a recognized as an internal or external command, operable program or batch file. and another thing i tried another utility on here and it said it said my device was not found when i plugged it in , is it because it turns off every 5 seconds?
First before you mess with your drivers shift+ right click on the tools folder in kfu select open command window here power your device off completely leave it unplugged type fastboot -i 0x1949 getvar product when it says waiting for device plug in your powered off kindle it should then power on in fastboot mode if you get the response product: kindle then type fastboot -i 0x1949 oem idme bootmode 4000 it will say okay hopefully the type fastboot -i 0x1949 reboot it should then reboot in normal mode
Edit: hit enter after each command
zellerax said:
How do you reinstall the drivers manually? and also when i go into the kindle fire utility it doesnt give me 1,2,3,4,5,6,7 options... it just says findstr is not a recognized as an internal or external command, operable program or batch file. and another thing i tried another utility on here and it said it said my device was not found when i plugged it in , is it because it turns off every 5 seconds?
Click to expand...
Click to collapse
Sounds like there's some sort of PATH problem with your setup, which is why KFU won't work properly. You'll have to manually use ADB/fastboot commands if you want to get things done.
About it turning off constantly, it's probably out of battery. Use the stock wall charger (it provides a greater power output, don't bother with USB or a random clone) so it can refill some. The bootloops may be due to a bad boot mode, but it's a bit hard to pinpont with your description of the issue.
You may want to have a read here, it'll help you to better understand what's going on and how to express yourself about the problems you are experiencing: http://forum.xda-developers.com/showthread.php?t=1552547
zellerax said:
How do you reinstall the drivers manually? and also when i go into the kindle fire utility it doesnt give me 1,2,3,4,5,6,7 options... it just says findstr is not a recognized as an internal or external command, operable program or batch file. and another thing i tried another utility on here and it said it said my device was not found when i plugged it in , is it because it turns off every 5 seconds?
Click to expand...
Click to collapse
You might have corrupt drivers. Here's how to reinstall them:
Try going to your Control Panel >> Device Manager. If you see an entry for "Android Phone," (Android ADB interface) delete it (and any associations with Portable Devices >> KF or Kindle Fire).
Restart computer.
Then go to your KFU utility folder, open "install_drivers.bat" (right-click "Run Administrator"). This shouldn't take long at all.
You might want to restart here too after.
Then open KFU utility, plug in Kindle - if all went well here, you should read something along the lines of "Online" and "4000".
I am a similar situation
Hi Guys,
I rooted my KF with no issues, was able to copy the Jellybean and Gapp zip file to the SD and thought I flashed with no issues. Then rebooted. Now the KF is stuck in a boot loop. If I boot to recovery, that works and allows me the recovery options. if I boot up to normal, it constantly reboots, if I boot to fastboot, it displays the Kindle Fire logo and says "press power button to boot menu" at the bottom and does nothing else. My computer recognizes it as Android ADB interface but will not allow to access the SD ram. Any help would be greatly appreciated.
It's usually better to start your own thread here on Q&A.
Are you able to access the SD Card from TWRP? (Mount USB)
If so and the ROM is still in there, wipe cache, dalvik-cache, factory reset and system, then flash/install the ROM again (don't install gapps yet) and reboot. If it boots all the way to the desktop, reboot to recovery and install gapps.
You may also want to check the ROM's hash.
You haven't mentioned what versions of TWRP and FFF do you have, either. Hopefully 2.1.1 or 2.2 for TWRP and 1.4a (blue "fire" on the kindle fire logo) for FFF.
Dasanko said:
It's usually better to start your own thread here on Q&A.
Are you able to access the SD Card from TWRP? (Mount USB)
If so and the ROM is still in there, wipe cache, dalvik-cache, factory reset and system, then flash/install the ROM again (don't install gapps yet) and reboot. If it boots all the way to the desktop, reboot to recovery and install gapps.
You may also want to check the ROM's hash.
You haven't mentioned what versions of TWRP and FFF do you have, either. Hopefully 2.1.1 or 2.2 for TWRP and 1.4a (blue "fire" on the kindle fire logo) for FFF.
Click to expand...
Click to collapse
Thanks for the info and sorry for the incomplete initial info. I will check this as soon as I get home and can work on it again.
Thanks for your help. It turns out that I didnt even have TWRP installed. Thats fixed. I was able to get roms installed and have different problems. (Will start a new thread in another area) Thank you very much for your help.
My Kindle was rooted but I decided to try my hand at installing a custom ROM. However, the ROM I tried would not work and the screen stayed black. However, thanks to TWRP I could install Kindle from Amazon again. The installation went thru smoothly, or so I thought. Now, when I boot the Kindle, I see the Kindle Fire Logo and it stays there. The Computer can see the Kindle as an Android device, Android Composite Device. But Kindle Fire Utility cannot see it so I could try and re-install it again. Any suggestions?
Lacking information, so I'll just fill the voids with assumptions.
I *assume* you didn't wipe cache, dalvik-cache and most important when switching from a ROM to another, Factory Reset - this is the reason said custom ROM wouldn't work, and the reason flashing back update.zip (as you said you installed it, rather than restoring a backup) caused your KF to get stuck in a semi brick.
The most important question here is, do you have FFF installed?
If you do, fixing this is trivial. Just get into TWRP from FFF, wipe cache, dalvik-cache and factory reset and then install whatever ROM you'd like to try or use.
If you don't have FFF installed, then your solutions are to either get a factory cable (recommended) or to crack open the case and do the USB pin short trick. From there you can use fastboot to install FFF and boot into TWRP.
Alternatively, you can try "fastboot getvar product" or "adb shell idme bootmode 5001" to see if you get lucky.
Dasanko said:
Lacking information, so I'll just fill the voids with assumptions.
I *assume* you didn't wipe cache, dalvik-cache and most important when switching from a ROM to another, Factory Reset - this is the reason said custom ROM wouldn't work, and the reason flashing back update.zip (as you said you installed it, rather than restoring a backup) caused your KF to get stuck in a semi brick.
The most important question here is, do you have FFF installed?
If you do, fixing this is trivial. Just get into TWRP from FFF, wipe cache, dalvik-cache and factory reset and then install whatever ROM you'd like to try or use.
If you don't have FFF installed, then your solutions are to either get a factory cable (recommended) or to crack open the case and do the USB pin short trick. From there you can use fastboot to install FFF and boot into TWRP.
Alternatively, you can try "fastboot getvar product" or "adb shell idme bootmode 5001" to see if you get lucky.
Click to expand...
Click to collapse
I tried the USB pin short trick but now my Kindle won't turn on at all nor will it charge. Thanks anyways!
i have similar problem ......please need help
After successfully rooting kf with kfu and making a backup ... I did factory reset and flashed a custom rom ... now kindle is stuck on " kindle fire" logo and just keeps flashing and rebooting . My computer recognizes it as android phone ( android adb ) and kfu does too but only for a couple of seconds . During those few seconds I try recovery ... fast boot ...normal boot... n none seem to work . Kf just reboots n returns to boot loop . Any advice is appreciated .. thanks
Start a new thread when you're posting your own issues.
What colour is the "kindle fire" logo when you turn on your KF?
Force Kindle into Fastboot
Ok, so I have finally got my Kindle to turn on, using the USB Short Trick. Now my only question is about getting the Kindle to boot into fastboot mode so I can re-format the sdcard partition and finally load a new ROM. I have tried several different commands and they all seem to miss the window of opportunity to start the kindle in fastboot mode. Is there any way, short of a factory cable, that one can make the kindle start in fastboot mode?
Not fastboot get var
ComputerGenuis2.0 said:
Ok, so I have finally got my Kindle to turn on, using the USB Short Trick. Now my only question is about getting the Kindle to boot into fastboot mode so I can re-format the sdcard partition and finally load a new ROM. I have tried several different commands and they all seem to miss the window of opportunity to start the kindle in fastboot mode. Is there any way, short of a factory cable, that one can make the kindle start in fastboot mode?
Click to expand...
Click to collapse
fastboot getvar product doesn't seem to do the trick. The kindle seems to be in fastboot mode but the adb shell cannot access the device.
The problem is that you don't have the fastboot drivers installed (also, ADB will not work while fastboot is active) - Windows is painfully slow at detecting a device and installing its drivers, so by the time it even notices anything, the fastboot window is already over.
To solve this, use firekit: http://forum.xda-developers.com/showthread.php?t=1430038
The script that will probably suit your needs the most is usb_install_fff_twrp.
Used Firekit
Dasanko said:
The problem is that you don't have the fastboot drivers installed (also, ADB will not work while fastboot is active) - Windows is painfully slow at detecting a device and installing its drivers, so by the time it even notices anything, the fastboot window is already over.
To solve this, use firekit: http://forum.xda-developers.com/showthread.php?t=1430038
The script that will probably suit your needs the most is usb_install_fff_twrp.
Click to expand...
Click to collapse
I have TWRP and FFF installed. However, upon booting into TWRP, the sdcard partition cannot be mounted, to the Kindle that is, and as such, I cannot mount the sdcard to the computer. When I researched this some more, I found that I can fix this by using a command via adb shell. The guide instructed using fastboot to achieve this. When would be the best time to use adb shell?
What's the output of partitions.txt? (type the following from TWRP)
adb shell parted /dev/block/mmcblk0 p > partitions.txt
Can't use adb
Dasanko said:
What's the output of partitions.txt? (type the following from TWRP)
adb shell parted /dev/block/mmcblk0 p > partitions.txt
Click to expand...
Click to collapse
The problem at hand is using adb. I can never time it exactly right to open adb. I always get an "error: device not found". Windows even recognizes that Android ADB Interface is plugged in.
Okay, things are getting awfully confusing here.
What exactly is it that you can do and that you cannot do?
For example, are FFF and TWRP functional?
GOT IT!
Thank you! I finally figured out that the wrong driver had reinstalled and that was causing my computer to not be able to use adb shell. I fixed that and voila, I am now running CM9. Thanks again!
I foolishly let someone try to root my Kindle Fire, and now it is stuck in what seems to be the TWRP boot loop (the kindle fire is blue and white). If I leave it alone unplugged it will occasionally continue to the Kindle Fire orange and white screen but will not go any farther. From the Blue/white screen I can hit the power button to enter the boot menu where I get Normal Boot, Recovery, and Reset Boot Mode. I can enter TWRP recovery menus, but otherwise it just keeps rebooting. Once in the TWRP recovery screen I can only navigate for a short time before it locks up and I have to reboot by holding the power button in. The sd card will not mount, and they did not backup anything before they started messing with the os. Ive tried the Kindle Fire utility but it says device not found. The Kindle showed up in my device manager as Other-Kindle before I installed the android drivers mentioned in another thread, and now it is under Android Phone- Android ADB Interface. It doesnt show up in My Computer at all. I've read about the factory cable but cant find on in the US so it would take 2 weeks to get here from China. Any suggestions on how to fix this, or do I now have a $200 paperweight? Thanks in advance.
Kamakookie said:
I foolishly let someone try to root my Kindle Fire, and now it is stuck in what seems to be the TWRP boot loop (the kindle fire is blue and white). If I leave it alone unplugged it will occasionally continue to the Kindle Fire orange and white screen but will not go any farther. From the Blue/white screen I can hit the power button to enter the boot menu where I get Normal Boot, Recovery, and Reset Boot Mode. I can enter TWRP recovery menus, but otherwise it just keeps rebooting. Once in the TWRP recovery screen I can only navigate for a short time before it locks up and I have to reboot by holding the power button in. The sd card will not mount, and they did not backup anything before they started messing with the os. Ive tried the Kindle Fire utility but it says device not found. The Kindle showed up in my device manager as Other-Kindle before I installed the android drivers mentioned in another thread, and now it is under Android Phone- Android ADB Interface. It doesnt show up in My Computer at all. I've read about the factory cable but cant find on in the US so it would take 2 weeks to get here from China. Any suggestions on how to fix this, or do I now have a $200 paperweight? Thanks in advance.
Click to expand...
Click to collapse
Maybe go into twrp and do a factory reset. Can you get to that menu? Click wipe and then factory reset.
I've tried the factory reset but it seems to have no effect on it. How do I do the adb push? I've tried using the command prompt to run some of the commands on other threads but I'm not doing something right. I always get an 'adb' is not recognized as an internal or external command, operable program or batch file error.
I'll apologize now for my stupidity on this one- I have never worked with android software before this.
The kindle fire utility reads:
ADB status: Offline
Boot Status: Unknown
I can get it to boot in normal and recovery mode, but each time I try to boot in Fastboot I get an error message 'Oops... something went wrong. We are unable to locate your Kindle Fire. Make sure it is plugged in and powered on.' The Kindle shows up in Device Manager under Android Phone as Android ADB Interface
When using the twrp, anything that involves writing to or wiping the sd card receives this error E:failed to mount /sdcard (invalid argument)
I'd appreciate any help I can get. I'm at a standstill on this one.
im in the same position you can open it as a USB by selecting mount in TWRP and selecting mount USB Storage
do you have drivers / ADB on your computer ?
I did manage to get my kindle go into a recovery boot loop by doing the root procedure for the original 6.3 original Amazon ROM while my kindle had the 6.2 ROM . After i realized that the root procedure (intended for ver 6.3) didn't work for me, I had to try the procedure for rooting ver. 6.2.
It worked but after a couple of resets, the tablet went into a recovery boot loop.
what i did was to use ADB comands:
enter windows - > start command prompt (start - > run -> cmd)
check if kindle is connected: adb devices
if the device is found then use:
adb shell
su
idme bootmode 4000
exit
Hi all, I'm having a problem with my Kindle Fire. It is automatically booting into TWRP no matter what I do.
I have wiped everything, and installed the stock ROM, and when I reboot it just goes back to TWRP.
There is always a message of *verifying file system and *verifying partition. I can mount it and move files via USB.
In the fire utility it reads
ADB Status: Online
Boot Status: Unknown
If I try to change the bootmode it comes back waiting for device. I then got into the command line.
Doing "adb devices" shows it as being in recovery. I can reboot it from here, but goes right back to twrp.
I tried to do the adb shell--> su--> idme bootmode 4000
but after I do the shell it comes back that "su" isn't valid. I'm assuming I am doing something wrong, but I can't
for the life of me figure it out...any suggestions? Thanks in advance!
lukebunny said:
Hi all, I'm having a problem with my Kindle Fire. It is automatically booting into TWRP no matter what I do.
I have wiped everything, and installed the stock ROM, and when I reboot it just goes back to TWRP.
There is always a message of *verifying file system and *verifying partition. I can mount it and move files via USB.
In the fire utility it reads
ADB Status: Online
Boot Status: Unknown
If I try to change the bootmode it comes back waiting for device. I then got into the command line.
Doing "adb devices" shows it as being in recovery. I can reboot it from here, but goes right back to twrp.
I tried to do the adb shell--> su--> idme bootmode 4000
but after I do the shell it comes back that "su" isn't valid. I'm assuming I am doing something wrong, but I can't
for the life of me figure it out...any suggestions? Thanks in advance!
Click to expand...
Click to collapse
At startup hold thepower button untill you see the bootmenu come up and select "normal boot"
On the Kindle itself you mean? There is no bootmenu. I get the Kindle Fire (Orange) text, then goes straight to twrp, and if I do normal reboot from there, just straight back to twrp.
lukebunny said:
On the Kindle itself you mean? There is no bootmenu. I get the Kindle Fire (Orange) text, then goes straight to twrp, and if I do normal reboot from there, just straight back to twrp.
Click to expand...
Click to collapse
What version of TWRP do you have?
2.2.0
From twrp try booting into recovery that worked once for me to get a normal boot. Then make sure you put the fire fire fire bootloader on there so it never happens again
Sent from my DROID SPYDER using Tapatalk 2
jamminjon82 said:
From twrp try booting into recovery that worked once for me to get a normal boot. Then make sure you put the fire fire fire bootloader on there so it never happens again
Sent from my DROID SPYDER using Tapatalk 2
Click to expand...
Click to collapse
Tried it, no go.
This is what I get in the command line
The "<[6n" is likely the result of pressing the up or down arrow with number lock turned off and it is causing the command to be unrecognized.
Regardless, there's no need to use the "adb shell su -c..." command to get into fastboot. Instead use Pokey9000's bootmode binary "fbmode".
http://forum.xda-developers.com/showpost.php?p=20755810
Have you tried reboot to bootloader?
Sent from my Galaxy Nexus using Tapatalk 2
hey i got your answer I think? lol anyways...
soupmagnet said:
The "<[6n" is likely the result of pressing the up or down arrow with number lock turned off and it is causing the command to be unrecognized.
Click to expand...
Click to collapse
i'm pretty sure it's bla bla bla \platform-tools in that picture anyways that my answer anyways, maybe not but goodluck anyways........... and this 5 mins between post for low posting users is for the birds
digital_cha0s said:
i'm pretty surs it's bla bla bla \platform-tools in that picture anyways that my answer anyways goodluck
Click to expand...
Click to collapse
As you can see, the "adb shell" command is successful because of the change in the prompt.
~ # <-indicates the shell is working and active, so the actual /path of adb is irrelavent.
soupmagnet said:
Regardless, there's no need to use the "adb shell su -c..." command to get into fastboot. Instead use Pokey9000's bootmode binary "fbmode".
http://forum.xda-developers.com/showpost.php?p=20755810
Click to expand...
Click to collapse
That seems promising, but this is what I got when I tried it.
Also, thanks for your help everyone, I'm learning a lot as I go here!
Not sure what's going on here.. I unrooted my kindlefire with update.zip but I forgot to wipe to factory reset before i flashed update.zip and when i rebooted my kindle i noticed that A ! symbol popped up with "Sorry" that says "The application Calendar Storage (process com.android.providers.calendar) has stopped unexpectedly. Please try again" That isn't the only problem, i click force close and another prompt comes up saying "The process android.process.acore has stopped unexpectedly. Please try again" It waits a few seconds, then proceeds to do a fast reboot? It comes up with the yellow kindle fire and immediately after it boots up it shows the errors.
Not sure what to do. Tried installing TWRP but the kindle doesn't stay on long enough so right now I'm pretty unconvinced of anything..
Any help would be greatly appreciated.
You just need to fast quickly get to factory reset and reset it try from a powered off position it may give you a few seconds extra to complete the task...
Thepooch said:
You just need to fast quickly get to factory reset and reset it try from a powered off position it may give you a few seconds extra to complete the task...
Click to expand...
Click to collapse
I'm not sure how to get there.. I don't have any form of backup installed. It's on the complete default rom
Edit: Found out how to get to factory reset, only to discover that I need a 40% charge, when mine is less than 5% and won't charge any more because of my problem
Still haven't figured this out. Can't use my kindle at all until this is fixed :/
iKrotos said:
Still haven't figured this out. Can't use my kindle at all until this is fixed :/
Click to expand...
Click to collapse
You're most likely going to have to put the device into fastboot mode to fix this problem. You can quickly send a sequence of adb commands to put the device into fastboot before the system crashes...
http://forum.xda-developers.com/showthread.php?t=1638452
by using the "Getting to fastboot mode" section above. That seems sketchy at best. Otherwise, you can get a factory cable...
http://forum.xda-developers.com/showthread.php?t=1550999
and put it into fastboot mode that way. In either case, you'll want to delete the userdata partition...
Code:
fastboot -i 0x1949 erase userdata
Then the next time you boot the device normally (by changing the bootmode back to 4000 if it isn't already), the system software will remake that partition and it should boot normally.
kinfauns said:
You're most likely going to have to put the device into fastboot mode to fix this problem. You can quickly send a sequence of adb commands to put the device into fastboot before the system crashes...
http://forum.xda-developers.com/showthread.php?t=1638452
by using the "Getting to fastboot mode" section above. That seems sketchy at best. Otherwise, you can get a factory cable...
http://forum.xda-developers.com/showthread.php?t=1550999
and put it into fastboot mode that way. In either case, you'll want to delete the userdata partition...
Code:
fastboot -i 0x1949 erase userdata
Then the next time you boot the device normally (by changing the bootmode back to 4000 if it isn't already), the system software will remake that partition and it should boot normally.
Click to expand...
Click to collapse
Read the beginners guide for KF, Found about about ADB fastboot etc. Going to install ADB tomorrow and try to figure this all out. Thanks.
I can't do this. It's been over a month. My kindle is finished..
iKrotos said:
I can't do this. It's been over a month. My kindle is finished..
Click to expand...
Click to collapse
"I can't do this"
Well that explains everything, doesn't it? It's a good thing you explained your problem in such great detail or I might spend time trying to help you fix your Kindle thinking you "could" do it. Phew. Saved us all a lot of time, thank you.
I made the same mistake of flashing the stock update without wiping and factory resetting.
The device will boot, then immediately give the calendar and android.process.acore errors for about 20 seconds before rebooting. It doesn't give me enough time to do a factory reset through the menu before it restarts.
After reading up on basic guides and downloading the necessary software, I can't find a way to get to fastboot, and I'm afraid even the noob guides are just confusing me more at this point.
From what I can understand, I'll probably have to get a factory cable to force the device into fastboot, because the Kindle reboots before the PC has a chance to recognize it, but what happens then? I've read the ADB for dummies guides, and searched the forum for and I still can't really understand how to execute the commands.
Can anyone link a relevant thread, or maybe give some dumbed-down advice?
LaszloToth said:
I made the same mistake of flashing the stock update without wiping and factory resetting.
The device will boot, then immediately give the calendar and android.process.acore errors for about 20 seconds before rebooting. It doesn't give me enough time to do a factory reset through the menu before it restarts.
After reading up on basic guides and downloading the necessary software, I can't find a way to get to fastboot, and I'm afraid even the noob guides are just confusing me more at this point.
From what I can understand, I'll probably have to get a factory cable to force the device into fastboot, because the Kindle reboots before the PC has a chance to recognize it, but what happens then? I've read the ADB for dummies guides, and searched the forum for and I still can't really understand how to execute the commands.
Can anyone link a relevant thread, or maybe give some dumbed-down advice?
Click to expand...
Click to collapse
Get a factory cable and then we can work on fixing your device.
One thing you have to know about entering commands is that computers have no more intelligence than, say, an ordinary rock. Meaning, they are not able to think on their own. They don't have the capacity to make their own decisions. Everything is laid out for them via sets of instructions. ADB and fastboot are programs with their own sets of instructions embedded into them, so in order to use them, you must direct the computer to those programs. When entering commands from the command line, the computer will search only the present working directory for those commands (plus any directories in it's PATH, but that is a subject for another time). When you open a command prompt in Windows, it will start in a specific directory (folder). Normally in Windows its the "Documents and Settings" folder (if I remember correctly). When you enter a command like "adb devices", the computer will search it's own set of built in commands for the first word (command) in the command line (in this case, adb). If that command isn't in it's set of built in commands, it searches the present working directory. In all likelihood, adb will not be in in the first present working directory when the command prompt opens up so you have to redirect it. There are several ways to do this. You can make sure the directory containing adb is in your PATH, but there's a little bit of learning involved and it's unnecessary unless you intend to enter a LOT of adb commands. You can change directories (cd) to the correct folder, but if you don't know what you're doing it can get very confusing and frustrating. The easiest and most straight forward way of doing this is to locate the directory containing adb and fastboot then "Shift + right-click, on that folder and select "Open command window here". The command window that opens is where you'll enter your adb/fastboot commands. Apart from that, you must really know the commands you're using, how they're used and what they do, or you're just wasting your time.
Does or kindle gets recognized.. if so there is a chance to recover
Sent from my MB526 using Tapatalk 2
soupmagnet said:
Get a factory cable and then we can work on fixing your device.
One thing you have to know about entering commands is that computers have no more intelligence than, say, an ordinary rock. Meaning, they are not able to think on their own. They don't have the capacity to make their own decisions. Everything is laid out for them via sets of instructions. ADB and fastboot are programs with their own sets of instructions embedded into them, so in order to use them, you must direct the computer to those programs. When entering commands from the command line, the computer will search only the present working directory for those commands (plus any directories in it's PATH, but that is a subject for another time). When you open a command prompt in Windows, it will start in a specific directory (folder). Normally in Windows its the "Documents and Settings" folder (if I remember correctly). When you enter a command like "adb devices", the computer will search it's own set of built in commands for the first word (command) in the command line (in this case, adb). If that command isn't in it's set of built in commands, it searches the present working directory. In all likelihood, adb will not be in in the first present working directory when the command prompt opens up so you have to redirect it. There are several ways to do this. You can make sure the directory containing adb is in your PATH, but there's a little bit of learning involved and it's unnecessary unless you intend to enter a LOT of adb commands. You can change directories (cd) to the correct folder, but if you don't know what you're doing it can get very confusing and frustrating. The easiest and most straight forward way of doing this is to locate the directory containing adb and fastboot then "Shift + right-click, on that folder and select "Open command window here". The command window that opens is where you'll enter your adb/fastboot commands. Apart from that, you must really know the commands you're using, how they're used and what they do, or you're just wasting your time.
Click to expand...
Click to collapse
Thanks, I've read up a bit more about the ADB and Fastboot commands, and I think I have a better grasp on them now, and your explanation of where I need be as far as changing directories in the command prompt really clears things up.
From reading your advice earlier in this thread, my best option would probably be to wipe the existing user data on the device that I forgot about before re-flashing the stock Kindle update by changing directories to the folder which contains ADB.exe and Fastboot.exe, then running the "fastboot -i 0x1949 erase userdata" command once I've connected the device with a factory cable. By doing this, would I be essentially restoring the device as if it were brand new again? Aside from erasing user data, are there any other ADB or Fastboot commands that I should run?
Also, assuming the ADB drivers are installed properly, once I've plugged in the device with the factory cable, will KFU immediately recognize the device, or will I need to first run the "fastboot -i 0x1949 erase userdata" command to get it back to stock first before I get 4000 status in KFU? I'm wondering if I could just plug in the factory cable, root and flash TWRP via KFU, then wipe and factory reset the user data from within TWRP, or would that be going about it backwards?
Thanks again fro the help!
---------- Post added at 02:31 PM ---------- Previous post was at 02:24 PM ----------
kishorev said:
Does or kindle gets recognized.. if so there is a chance to recover
Sent from my MB526 using Tapatalk 2
Click to expand...
Click to collapse
No, the KFU status is "unknown" and Windows doesn't even really have time to recognize that the device is connected via USB, since the Kindle will reboot every 15-20 seconds.
I've ordered a factory cable, so hopefully it will be a pretty straight-forward fix once I get it.
Had a similar problem of rebooting every 10 sec or so..I left it on charge overnight and it worked..it got charged decent enough for me to help recover it..
Just try charging it overnight it might just work..I always feel using factory cable shd be the last resort
Sent from my Kindle Fire using Tapatalk 2
LaszloToth said:
Thanks, I've read up a bit more about the ADB and Fastboot commands, and I think I have a better grasp on them now, and your explanation of where I need be as far as changing directories in the command prompt really clears things up.
From reading your advice earlier in this thread, my best option would probably be to wipe the existing user data on the device that I forgot about before re-flashing the stock Kindle update by changing directories to the folder which contains ADB.exe and Fastboot.exe, then running the "fastboot -i 0x1949 erase userdata" command once I've connected the device with a factory cable. By doing this, would I be essentially restoring the device as if it were brand new again? Aside from erasing user data, are there any other ADB or Fastboot commands that I should run?
Also, assuming the ADB drivers are installed properly, once I've plugged in the device with the factory cable, will KFU immediately recognize the device, or will I need to first run the "fastboot -i 0x1949 erase userdata" command to get it back to stock first before I get 4000 status in KFU? I'm wondering if I could just plug in the factory cable, root and flash TWRP via KFU, then wipe and factory reset the user data from within TWRP, or would that be going about it backwards?
No, the KFU status is "unknown" and Windows doesn't even really have time to recognize that the device is connected via USB, since the Kindle will reboot every 15-20 seconds.
I've ordered a factory cable, so hopefully it will be a pretty straight-forward fix once I get it.
Click to expand...
Click to collapse
One thing you need to realize, is that once you get custom recovery installed, you will rarely ever need to use fastboot commands. Fastboot commands really only need to be used when everything else fails. Custom recovery and the latest version of the FireFireFire bootloader have probably 90% of the functionality that fastboot has, so unless those options aren't available to you, try to avoid fastboot altogether.
Most Kindle Fire problems are fixed by wiping the system, data & cache (factory reset) partitions and reinstalling the ROM.
Your first course of action should be to get TWRP and FireFireFire installed, if they aren't already. For this you will need fastboot commands. In order to issue fastboot commands, you need to be in fastboot mode. I'm guessing this is most likely not the case. Unfortunately, without a system to boot to, or the FireFireFire bootloader (blue Kindle Fire logo) installed, you have no chance of getting into fastboot without a factory cable.
The factory cable will get you into fastboot so you can reinstall custom recovery and reinstall a new ROM. You can then use the custom recovery to install a new bootloader (never wipe to install a bootloader BTW). Chances are, that is all you need to fix your device. You should keep your device powered off (hold power button for 20 seconds), until the factory cable arrives.
Hope that helps.
soupmagnet said:
One thing you need to realize, is that once you get custom recovery installed, you will rarely ever need to use fastboot commands. Fastboot commands really only need to be used when everything else fails. Custom recovery and the latest version of the FireFireFire bootloader have probably 90% of the functionality that fastboot has, so unless those options aren't available to you, try to avoid fastboot altogether.
Most Kindle Fire problems are fixed by wiping the system, data & cache (factory reset) partitions and reinstalling the ROM.
Your first course of action should be to get TWRP and FireFireFire installed, if they aren't already. For this you will need fastboot commands. In order to issue fastboot commands, you need to be in fastboot mode. I'm guessing this is most likely not the case. Unfortunately, without a system to boot to, or the FireFireFire bootloader (blue Kindle Fire logo) installed, you have no chance of getting into fastboot without a factory cable.
The factory cable will get you into fastboot so you can reinstall custom recovery and reinstall a new ROM. You can then use the custom recovery to install a new bootloader (never wipe to install a bootloader BTW). Chances are, that is all you need to fix your device. You should keep your device powered off (hold power button for 20 seconds), until the factory cable arrives.
Hope that helps.
Click to expand...
Click to collapse
So instead of using fastboot to wipe the user data, I should use it to install TWRP? Can you give me the fastboot command for that? Or can I do that with KFU once I plug in the factory cable?
http://forum.xda-developers.com/showpost.php?p=23747804
Thanks soupmagnet, I got the factory cable today and was able to flash FFF and TWRP with fastboot commands, and it's working like it should again. You help has been much appreciated.
same problem with kindle fire.
LaszloToth said:
Thanks soupmagnet, I got the factory cable today and was able to flash FFF and TWRP with fastboot commands, and it's working like it should again. You help has been much appreciated.
Click to expand...
Click to collapse
hi, i am new here and i got exact the same problem with you, i just ordered the factory cable, can you please give the step by step procedure on solving this problem with the factory cable. your help will be appreciated, thanks.
Thepooch said:
You just need to fast quickly get to factory reset and reset it try from a powered off position it may give you a few seconds extra to complete the task...
Click to expand...
Click to collapse
:good::good::good::good::good::good: works for me thank you
ok, today i had the same problem because i didn't wipe the factory restore!
The solution WASN'T the Factory Cable (I was considering buying one)!
Very easy:
Linux and SOUPKIT! were the solution, when the tablet boots up immediately hit the install recovery, after installing recovery, just set to boot into recovery.
Now is very much you can do (ex. wipe everything and than install update.zip all over)
Very much thank you to the guy who made SOUPKIT! (u've saved my S many many times )
I've read through hundreds of similar threads and haven't been able to find a solution - I'll gladly give up my firstborn (and/or make a paypal donation) to anyone who is able to help solve my issue!!
From my research, I seem to have no OS installed on the Kindle, and as far as I can tell, I'm booting into fastboot mode (screen hangs on the blue/white Kindle Fire logo, screen does not ever dim). I AM able to access TWRP Recovery, but don't have any backup to load from, am unable to successfully flash the ROM that I have saved to my SD card. My device manager recognizes the Kindle as a Kindle Fire (Android ADB Interface), no yellow triangles. Typing ADB Devices into Command Prompt gets me: [device number ] offline. Typing fastboot devices into Command Prompt gets me nothing (blank line).
Background/How I 'Bricked' It: I have a Kindle Fire 2 and was able to successfully unroot/flash Cyanogenmod 10 onto it. Worked perfectly for about 6 months, when I decided that it would be a good idea to flash back to stock so that I could give it to a relative. I have TWRP 2.3.3.0, so I used a guide on xda to do the following:
I used a guide from xda and followed these instructions
-Download latest KF2 stock software from amazon. Re-name the file to update.zip
-Moved it to the root of the SD card
-Booted in to TWRP
-Factory Wipe/Restore
-Wiped Cache
-Wiped Dalvik Cache
-Wiped System
-Installed the "update.zip"
-Wiped cache/dalvik again
-Rebooted
Unfortunately, wiping the system seems to have wiped the CM10 OS (ROM) that I had installed, and there was a failure in installing the amazon stock:
Installing '/sdcard/download/update.zip...
assert failed: is_substring ("Otter2 , file_getstring("/proc/product_name"))
E: Error in /sdcard/download/update.zip
(Status 7)
Error flashing zip '/sdcard/download/update.zip'
Updating partition details...
Trying to reboot the system from TWRP results in a message that states: "No OS installed! Are you sure you wish to reboot?"
Investigating using ADB: So it looks like I have no OS on the Kindle Fire 2. This seems to be a problem because without an OS, I am unable to use adb (from what I've read, no OS = no way to accept/authenticate the computer RSA fingerprint to whitelist the kindle and allow adb to function). Trying to use KFU, KFFirstAide, or the Kindle UnBrick Utility results in Error: Device offline or Error: Device not found types of messages (I am assuming due to the fact that I can't "turn" adb on by accepting the RSA fingerprint prompt)
What does Device Manager tell me? My computer can 'see' the Kindle Fire in device manager [as I stated earlier: My device manager recognizes the Kindle as a Kindle Fire (Android ADB Interface), no yellow triangles] but going to My Computer and looking under mass storage devices, the computer doesn't seem to recognize the device as a USB storage device, which is a problem because I can't drag/drop or push/pull files to the SD card so I can't try to flash anything *other* than the original file that failed.
Fastboot Mode...? From what I can tell (http://forum.xda-developers.com/showthread.php?t=1668159), my device is in fastboot mode. My Kindle screen hangs on the blue/white Kindle Fire logo screen, which from what I understand is hashcode's bootloader/fastboot screen. However, when I look at the Hardware IDs in the device manager, it tells me that my hardware IDs are:
USB\VID_1949&PID_0006&REV_0216
USB\VID_1949&PID_0006
So...my kindle seems to be stuck on the blue/white fastboot screen, but register on my computer as the stock kindle fastboot? I'm not really sure what's going on there, and couldn't find too many people with the same discrepancy that I have...
I tried plugging in my cord (making sure to use a USB 2.0 port), going into Command Prompt and using some fastboot commands. (ie: fastboot flash bootloader \path\update.zip) but all I get is a <waiting for device> for a LONG time. As in, a few hours. Some basic googling/investigation seems to indicate that I don't have fastboot drivers installed, OR that I wasn't running fastboot in an 'elevated mode' but I haven't been able to find too many details about how to fix those, IF that is the problem.
TWRP 2.3.3.0: I can get into TWRP recovery just fine, although I can't seem to figure out how to get files onto my device. So I've tried re-installing the original update.zip file that failed the first time several times, with no success. trying to 'Mount' the device doesn't seem to do anything (at least, my computer doesn't see the device as USB storage regardless of whether it's mounted or not) I tried using Advanced --> ADB Sideload, but trying to send the file in Command Prompt using the adb sideload <filename> command just gets me an Error: Device not Found message. I thought maybe I could try Advanced --> Terminal Command, but have no idea how to do that or what it does, and most sites are very vague about the step-by-step details, so I didn't really touch it.
Not sure if this is relevant or not, but when my KF2 is plugged into (attached) to my computer with the cord and is in TWRP, device manager shows the device under 'Other Devices' --> Amazon Kindle Fire2, and there is a yellow triangle on it. Not sure why...going back to 'fastboot' mode gets rid of yellow triangles and is recognized as a Kindle Fire again.
At this point - I'm pretty much stumped and have (hopefully) demonstrated that I've done my best to do my own research/read through threads/done due diligence. Is there anyone out there that might have any suggestions? Or do I now have a very large paperweight?
ANY input/suggestions/encouragement is welcome! I absolutely and sincerely appreciate your time in reading through this thread and trying to help noobs like me!
Use fast boot mode to recover to stock: http://forum.xda-developers.com/showthread.php?t=2096888
Or
If you have access to twrp. Use the ADb sideload feature to push CyanogenMod or another ROM over.
One thing though- if you can boot into TWRP you didn't wipe the system partition. Twrp for kf2 requires a file named stack to be there.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
...tried those, but maybe am doing them incorrectly?
mindmajick said:
Use fast boot mode to recover to stock: http://forum.xda-developers.com/showthread.php?t=2096888
Or
If you have access to twrp. Use the ADb sideload feature to push CyanogenMod or another ROM over.
One thing though- if you can boot into TWRP you didn't wipe the system partition. Twrp for kf2 requires a file named stack to be there.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
Trying to use the ADB sideload feature to push CM or another ROM over doesn't seem to be working for me (unless I'm doing it wrong?)
I tried using Advanced --> ADB Sideload, but trying to send the file in Command Prompt using the "adb sideload C:\users\Name\update.zip command just gets me an Error: Device not Found message". Could I be using the command incorrectly?
Trying to use any fastboot command in Windows Command Prompt results in <waiting for device> to hang for hours, with no changes to command prompt and no changes to the kindle (still sits at the blue/white boot logo).
Ah. Sorry. Missed that in the OP.
Sounds like you probably need the drivers installed.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Fastboot Drivers
mindmajick said:
Ah. Sorry. Missed that in the OP.
Sounds like you probably need the drivers installed.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
Are there difference drivers for fastboot and adb? I don't get a 'yellow triangle' and my device manager identifies the device as a Kindle Fire [Android ADB Interface], so I thought I was okay.
Should I be looking for fastboot drivers?
And btw, thanks so much for your willingness to help and input!
ME TOO
Just purchased a KF from someone...thay had rooted it...I tried to unroot...got stuck...now mine is doing the same as yours. I hope someone has a fix for you as I too have a large paperweight.
Follow Up
tessa33 said:
I've read through hundreds of similar threads and haven't been able to find a solution - I'll gladly give up my firstborn (and/or make a paypal donation) to anyone who is able to help solve my issue!!
From my research, I seem to have no OS installed on the Kindle, and as far as I can tell, I'm booting into fastboot mode (screen hangs on the blue/white Kindle Fire logo, screen does not ever dim). I AM able to access TWRP Recovery, but don't have any backup to load from, am unable to successfully flash the ROM that I have saved to my SD card. My device manager recognizes the Kindle as a Kindle Fire (Android ADB Interface), no yellow triangles. Typing ADB Devices into Command Prompt gets me: [device number ] offline. Typing fastboot devices into Command Prompt gets me nothing (blank line).
Click to expand...
Click to collapse
tessa33,
I just sent you a response. Call me at 707-774-5923 when you have a moment.
Solution?
I figured I could post in this thread before staring my own because I am having a very similar issue trying to revert my Kindle Fire 2 back to stock from cyanogen so I can sell it. I downloaded the official software from Amazon but every time I try to flash it through TWRP I get the exact same error you were getting. Did anyone ever figure out how to resolve the issue for you?
Had the same problem, so I chatted with an Amazon associate, told him I turned it on one day and it showed the grey triangle and he sent me a new Kindle Fire 2nd Gen for free. Try that...
Sent from my iPhone using Tapatalk
Hello
I have rooted KF2 and I did factory reset I lost TWRP&Os I can see the device as ADB device, Howeverm when the device in fastboot the pc not recognize it.
issuing fastboot devices command return nothing.
I used ubuntu and windows still the same issue. any idea?