Develop Bugs

[Q] Kindle Fire keeps looping Kindle Fire logo

So I've read the similar threads, no clear answer.
I've searched the forums with no real clear answer.
So before I continue, I just want to make sure that this is correct.
Kindle Fire turns on, I have fully charged it overnight, and it still boot loops. The Kindle Fire logo comes on, flashes on and off, logo shows again with the logo glimmering, and then turns off and back on. It starts the process over. Very rarely will it go all the way to the arrow that you slide but you can't ever slide it over to get in, it just restarts.
So from my understanding is that the shell is corrupt and I need a factory cable to force fastboot. Is this correct? Thank you for reading my post.

Not necessarily. If you are talking about the stock "Kindle Fire" logo. Skip to the second half.
If you are talking about the FFF1.3 Kindle Fire logo with the Andy above it, you should be able to get into recovery, so long as you flashed a recovery.
If this is the case, start the kindle and watch the power button. When it dims press it a few times. It should change to an orange/amber color after a few presses and then boot into your recovery. From there you can load a rom and get yourself back on track.
If you have the stock bootloader, I'm not sure this will work for you, but it won't hurt to try. Worst case you are out the time it took you to make the USB.
As I found out yesterday, fastboot occurs so quick that Windows might not have the chance to discover and install drivers. So if you have a USB drive, create a firekit LiveUSB.
Once you have a LiveUSB and have booted off it and started firekit, try running normal_boot and then, when powered off, plug the kindle into the computer. With luck, it will reboot and start up into your rom.
If you are unlucky, try install_fff_twrp. Again have the kindle off, and connect it to the USB.
If that does not work try again with install_fff_twrp_from_stock as a last ditch effort.
If that fails, get your factory cable. You can try the other commands too, but I wouldn't hold your breath. But, if it works great.

ok well first off when I first turn it on, I get the yellow fire warning sign that states at the bottom to push the power button for recovery.
I'm getting things to install just fine but anytime it has anything to do with ADB, it does not work. It doesn't work with a regular cable nor the factory cable. Everytime it states that device is not found.
From what I've read the drivers are working properly if I'm able to use fastboot and it shows up in the device manager as a Android Phone > Android ADB Device.
The only time I can keep it recognized by the computer is with the factory cable.
If I use the regular cable, it recognizes it for a second then boots into TWRP but the computer doesn't see the Kindle anymore.
All I'm needing to do is reinstall STOCK Firmware. When I first got it, it just boot looped.

Use the factory cable to change your bootmode to 4000. Reboot, then turn it off and let it charge. It sounds like you are stuck in fastboot mode (4002) with a dead battery, and if I'm not mistaken the device won't charge in fastboot. The factory cable forces fastboot mode, bypasses the battery and provides power directly to the device which is why you are able to issue fastboot commands with the cable.
Sent from my Amazon Kindle Fire using xda premium

Charged
When I am not working on it, I plug it back up to the charger to charge, so charging isn't the problem. TWRP states that the battery is 98% charged when I unplug it.

in twrp you have to manually mount the system and sd card from mount options!
Mount the sd card, save the kindle update bin file, renaming it to update.zip and install from twrp

[Note to self:] Avoid using XDA while on Ambien.
wiredextreme said:
I'm getting things to install just fine but anytime it has anything to do with ADB, it does not work. It doesn't work with a regular cable nor the factory cable. Everytime it states that device is not found.
From what I've read the drivers are working properly if I'm able to use fastboot and it shows up in the device manager as a Android Phone > Android ADB Device.
Click to expand...
Click to collapse
Not necessarily true when using Windows and KFU. Sometimes you still have to uninstall/delete your drivers and reinstall again.
The only time I can keep it recognized by the computer is with the factory cable.
Click to expand...
Click to collapse
If I use the regular cable, it recognizes it for a second then boots into TWRP but the computer doesn't see the Kindle anymore.
Click to expand...
Click to collapse
If it boots directly into TWRP, then you have your bootmode set to recovery.
All I'm needing to do is reinstall STOCK Firmware. When I first got it, it just boot looped.
Click to expand...
Click to collapse
If all you want to do is reinstall stock this is easy to fix. Go to the Amazon Kindle website and download the latest 6.3 update. It will be in a .bin format.
Change the name of the update.bin to update.zip
Boot your Kindle to TWRP
Go to "Mount" and mount your SDcard
You should see "[X] Unmount Sdcard" before pressing "Mount to USB"
Your device's sdcard will show up on your computer
Place the newly renamed update.zip on your sdcard
Go to "Install" and flash the update.zip
When installed, the update.zip will turn everything back the way it was when you turned it on for the first time.
Sent from my Kindle Fire using xda premium

In TWRP, it will not let me select Mount SD Card, it will only let me select Mount System. :X

The only option I know of besides Linux liveUSB Firekit, would require you to format your sdcard and you would lose all of your data. You might be able to mount your system folder to transfer files and just flash it in TWRP from there but I've never tried it. If that doesn't work and you don't mind erasing your whole sdcard...
Boot into recovery (TWRP)
Get your command prompt ready with adb in your present working directory (if you're not sure type: dir )
adb shell
echo /dev/block/mmcblk0p12 > /sys/devices/platform/usb_mass_storage/lun0/file
That will mount sdcard to your computer like an external drive. You'll probably have to format it. In Windows, select Quick Format > FAT32 > block size 4096.
Just make sure that the volume you are formatting is your sdcard (>5Gb) You should be able to move your update.zip to it then.

soupmagnet said:
You'll probably have to format it
Click to expand...
Click to collapse
May be am missing something here, but why can't he "adb push update.zip sdcard/Download" and Flash it from twrp?

I tried to install [JB 4.3.1] CM10.2/SGT7 [20131022] and now bootlogo CM is looping. Tried reinstall but result is the same. I can enter in FFF, TWRP is installed. What should i do?

Kindle Fire. Device Manager Sees but Kindle Fire Utility Doesn't

My Kindle was rooted but I decided to try my hand at installing a custom ROM. However, the ROM I tried would not work and the screen stayed black. However, thanks to TWRP I could install Kindle from Amazon again. The installation went thru smoothly, or so I thought. Now, when I boot the Kindle, I see the Kindle Fire Logo and it stays there. The Computer can see the Kindle as an Android device, Android Composite Device. But Kindle Fire Utility cannot see it so I could try and re-install it again. Any suggestions?

Lacking information, so I'll just fill the voids with assumptions.
I *assume* you didn't wipe cache, dalvik-cache and most important when switching from a ROM to another, Factory Reset - this is the reason said custom ROM wouldn't work, and the reason flashing back update.zip (as you said you installed it, rather than restoring a backup) caused your KF to get stuck in a semi brick.
The most important question here is, do you have FFF installed?
If you do, fixing this is trivial. Just get into TWRP from FFF, wipe cache, dalvik-cache and factory reset and then install whatever ROM you'd like to try or use.
If you don't have FFF installed, then your solutions are to either get a factory cable (recommended) or to crack open the case and do the USB pin short trick. From there you can use fastboot to install FFF and boot into TWRP.
Alternatively, you can try "fastboot getvar product" or "adb shell idme bootmode 5001" to see if you get lucky.

Dasanko said:
Lacking information, so I'll just fill the voids with assumptions.
I *assume* you didn't wipe cache, dalvik-cache and most important when switching from a ROM to another, Factory Reset - this is the reason said custom ROM wouldn't work, and the reason flashing back update.zip (as you said you installed it, rather than restoring a backup) caused your KF to get stuck in a semi brick.
The most important question here is, do you have FFF installed?
If you do, fixing this is trivial. Just get into TWRP from FFF, wipe cache, dalvik-cache and factory reset and then install whatever ROM you'd like to try or use.
If you don't have FFF installed, then your solutions are to either get a factory cable (recommended) or to crack open the case and do the USB pin short trick. From there you can use fastboot to install FFF and boot into TWRP.
Alternatively, you can try "fastboot getvar product" or "adb shell idme bootmode 5001" to see if you get lucky.
Click to expand...
Click to collapse
I tried the USB pin short trick but now my Kindle won't turn on at all nor will it charge. Thanks anyways!

i have similar problem ......please need help
After successfully rooting kf with kfu and making a backup ... I did factory reset and flashed a custom rom ... now kindle is stuck on " kindle fire" logo and just keeps flashing and rebooting . My computer recognizes it as android phone ( android adb ) and kfu does too but only for a couple of seconds . During those few seconds I try recovery ... fast boot ...normal boot... n none seem to work . Kf just reboots n returns to boot loop . Any advice is appreciated .. thanks

Start a new thread when you're posting your own issues.
What colour is the "kindle fire" logo when you turn on your KF?

Force Kindle into Fastboot
Ok, so I have finally got my Kindle to turn on, using the USB Short Trick. Now my only question is about getting the Kindle to boot into fastboot mode so I can re-format the sdcard partition and finally load a new ROM. I have tried several different commands and they all seem to miss the window of opportunity to start the kindle in fastboot mode. Is there any way, short of a factory cable, that one can make the kindle start in fastboot mode?

Not fastboot get var
ComputerGenuis2.0 said:
Ok, so I have finally got my Kindle to turn on, using the USB Short Trick. Now my only question is about getting the Kindle to boot into fastboot mode so I can re-format the sdcard partition and finally load a new ROM. I have tried several different commands and they all seem to miss the window of opportunity to start the kindle in fastboot mode. Is there any way, short of a factory cable, that one can make the kindle start in fastboot mode?
Click to expand...
Click to collapse
fastboot getvar product doesn't seem to do the trick. The kindle seems to be in fastboot mode but the adb shell cannot access the device.

The problem is that you don't have the fastboot drivers installed (also, ADB will not work while fastboot is active) - Windows is painfully slow at detecting a device and installing its drivers, so by the time it even notices anything, the fastboot window is already over.
To solve this, use firekit: http://forum.xda-developers.com/showthread.php?t=1430038
The script that will probably suit your needs the most is usb_install_fff_twrp.

Used Firekit
Dasanko said:
The problem is that you don't have the fastboot drivers installed (also, ADB will not work while fastboot is active) - Windows is painfully slow at detecting a device and installing its drivers, so by the time it even notices anything, the fastboot window is already over.
To solve this, use firekit: http://forum.xda-developers.com/showthread.php?t=1430038
The script that will probably suit your needs the most is usb_install_fff_twrp.
Click to expand...
Click to collapse
I have TWRP and FFF installed. However, upon booting into TWRP, the sdcard partition cannot be mounted, to the Kindle that is, and as such, I cannot mount the sdcard to the computer. When I researched this some more, I found that I can fix this by using a command via adb shell. The guide instructed using fastboot to achieve this. When would be the best time to use adb shell?

What's the output of partitions.txt? (type the following from TWRP)
adb shell parted /dev/block/mmcblk0 p > partitions.txt

Can't use adb
Dasanko said:
What's the output of partitions.txt? (type the following from TWRP)
adb shell parted /dev/block/mmcblk0 p > partitions.txt
Click to expand...
Click to collapse
The problem at hand is using adb. I can never time it exactly right to open adb. I always get an "error: device not found". Windows even recognizes that Android ADB Interface is plugged in.

Okay, things are getting awfully confusing here.
What exactly is it that you can do and that you cannot do?
For example, are FFF and TWRP functional?

GOT IT!
Thank you! I finally figured out that the wrong driver had reinstalled and that was causing my computer to not be able to use adb shell. I fixed that and voila, I am now running CM9. Thanks again!

Kindle Fire stuck in TWRP boot loop, wont mount, not recognized.

I foolishly let someone try to root my Kindle Fire, and now it is stuck in what seems to be the TWRP boot loop (the kindle fire is blue and white). If I leave it alone unplugged it will occasionally continue to the Kindle Fire orange and white screen but will not go any farther. From the Blue/white screen I can hit the power button to enter the boot menu where I get Normal Boot, Recovery, and Reset Boot Mode. I can enter TWRP recovery menus, but otherwise it just keeps rebooting. Once in the TWRP recovery screen I can only navigate for a short time before it locks up and I have to reboot by holding the power button in. The sd card will not mount, and they did not backup anything before they started messing with the os. Ive tried the Kindle Fire utility but it says device not found. The Kindle showed up in my device manager as Other-Kindle before I installed the android drivers mentioned in another thread, and now it is under Android Phone- Android ADB Interface. It doesnt show up in My Computer at all. I've read about the factory cable but cant find on in the US so it would take 2 weeks to get here from China. Any suggestions on how to fix this, or do I now have a $200 paperweight? Thanks in advance.

Kamakookie said:
I foolishly let someone try to root my Kindle Fire, and now it is stuck in what seems to be the TWRP boot loop (the kindle fire is blue and white). If I leave it alone unplugged it will occasionally continue to the Kindle Fire orange and white screen but will not go any farther. From the Blue/white screen I can hit the power button to enter the boot menu where I get Normal Boot, Recovery, and Reset Boot Mode. I can enter TWRP recovery menus, but otherwise it just keeps rebooting. Once in the TWRP recovery screen I can only navigate for a short time before it locks up and I have to reboot by holding the power button in. The sd card will not mount, and they did not backup anything before they started messing with the os. Ive tried the Kindle Fire utility but it says device not found. The Kindle showed up in my device manager as Other-Kindle before I installed the android drivers mentioned in another thread, and now it is under Android Phone- Android ADB Interface. It doesnt show up in My Computer at all. I've read about the factory cable but cant find on in the US so it would take 2 weeks to get here from China. Any suggestions on how to fix this, or do I now have a $200 paperweight? Thanks in advance.
Click to expand...
Click to collapse
Maybe go into twrp and do a factory reset. Can you get to that menu? Click wipe and then factory reset.

I've tried the factory reset but it seems to have no effect on it. How do I do the adb push? I've tried using the command prompt to run some of the commands on other threads but I'm not doing something right. I always get an 'adb' is not recognized as an internal or external command, operable program or batch file error.
I'll apologize now for my stupidity on this one- I have never worked with android software before this.
The kindle fire utility reads:
ADB status: Offline
Boot Status: Unknown
I can get it to boot in normal and recovery mode, but each time I try to boot in Fastboot I get an error message 'Oops... something went wrong. We are unable to locate your Kindle Fire. Make sure it is plugged in and powered on.' The Kindle shows up in Device Manager under Android Phone as Android ADB Interface
When using the twrp, anything that involves writing to or wiping the sd card receives this error E:failed to mount /sdcard (invalid argument)
I'd appreciate any help I can get. I'm at a standstill on this one.

im in the same position you can open it as a USB by selecting mount in TWRP and selecting mount USB Storage

do you have drivers / ADB on your computer ?
I did manage to get my kindle go into a recovery boot loop by doing the root procedure for the original 6.3 original Amazon ROM while my kindle had the 6.2 ROM . After i realized that the root procedure (intended for ver 6.3) didn't work for me, I had to try the procedure for rooting ver. 6.2.
It worked but after a couple of resets, the tablet went into a recovery boot loop.
what i did was to use ADB comands:
enter windows - > start command prompt (start - > run -> cmd)
check if kindle is connected: adb devices
if the device is found then use:
adb shell
su
idme bootmode 4000
exit

Hi all, I'm having a problem with my Kindle Fire. It is automatically booting into TWRP no matter what I do.
I have wiped everything, and installed the stock ROM, and when I reboot it just goes back to TWRP.
There is always a message of *verifying file system and *verifying partition. I can mount it and move files via USB.
In the fire utility it reads
ADB Status: Online
Boot Status: Unknown
If I try to change the bootmode it comes back waiting for device. I then got into the command line.
Doing "adb devices" shows it as being in recovery. I can reboot it from here, but goes right back to twrp.
I tried to do the adb shell--> su--> idme bootmode 4000
but after I do the shell it comes back that "su" isn't valid. I'm assuming I am doing something wrong, but I can't
for the life of me figure it out...any suggestions? Thanks in advance!

lukebunny said:
Hi all, I'm having a problem with my Kindle Fire. It is automatically booting into TWRP no matter what I do.
I have wiped everything, and installed the stock ROM, and when I reboot it just goes back to TWRP.
There is always a message of *verifying file system and *verifying partition. I can mount it and move files via USB.
In the fire utility it reads
ADB Status: Online
Boot Status: Unknown
If I try to change the bootmode it comes back waiting for device. I then got into the command line.
Doing "adb devices" shows it as being in recovery. I can reboot it from here, but goes right back to twrp.
I tried to do the adb shell--> su--> idme bootmode 4000
but after I do the shell it comes back that "su" isn't valid. I'm assuming I am doing something wrong, but I can't
for the life of me figure it out...any suggestions? Thanks in advance!
Click to expand...
Click to collapse
At startup hold thepower button untill you see the bootmenu come up and select "normal boot"

On the Kindle itself you mean? There is no bootmenu. I get the Kindle Fire (Orange) text, then goes straight to twrp, and if I do normal reboot from there, just straight back to twrp.

lukebunny said:
On the Kindle itself you mean? There is no bootmenu. I get the Kindle Fire (Orange) text, then goes straight to twrp, and if I do normal reboot from there, just straight back to twrp.
Click to expand...
Click to collapse
What version of TWRP do you have?

2.2.0

From twrp try booting into recovery that worked once for me to get a normal boot. Then make sure you put the fire fire fire bootloader on there so it never happens again
Sent from my DROID SPYDER using Tapatalk 2

jamminjon82 said:
From twrp try booting into recovery that worked once for me to get a normal boot. Then make sure you put the fire fire fire bootloader on there so it never happens again
Sent from my DROID SPYDER using Tapatalk 2
Click to expand...
Click to collapse
Tried it, no go.

This is what I get in the command line

The "<[6n" is likely the result of pressing the up or down arrow with number lock turned off and it is causing the command to be unrecognized.

Regardless, there's no need to use the "adb shell su -c..." command to get into fastboot. Instead use Pokey9000's bootmode binary "fbmode".
http://forum.xda-developers.com/showpost.php?p=20755810

Have you tried reboot to bootloader?
Sent from my Galaxy Nexus using Tapatalk 2

hey i got your answer I think? lol anyways...
soupmagnet said:
The "<[6n" is likely the result of pressing the up or down arrow with number lock turned off and it is causing the command to be unrecognized.
Click to expand...
Click to collapse
i'm pretty sure it's bla bla bla \platform-tools in that picture anyways that my answer anyways, maybe not but goodluck anyways........... and this 5 mins between post for low posting users is for the birds

digital_cha0s said:
i'm pretty surs it's bla bla bla \platform-tools in that picture anyways that my answer anyways goodluck
Click to expand...
Click to collapse
As you can see, the "adb shell" command is successful because of the change in the prompt.
~ # <-indicates the shell is working and active, so the actual /path of adb is irrelavent.

soupmagnet said:
Regardless, there's no need to use the "adb shell su -c..." command to get into fastboot. Instead use Pokey9000's bootmode binary "fbmode".
http://forum.xda-developers.com/showpost.php?p=20755810
Click to expand...
Click to collapse
That seems promising, but this is what I got when I tried it.

Also, thanks for your help everyone, I'm learning a lot as I go here!

Kindle Fire stuck on boot triangles

I was told to post this here:
The Problem:
I tried to take the crappy amazon software that only works in the US off this kindle fire, Installed JandyKane and Gapps with no problems (i cleared dalvik cache, regular cache, and factory reset) Also installed Clockwork Recovery (which i read somewhere that might have been the problem).
(note: I used the KF utility)
Now when i turn the device on, it shows the Kindle fire logo for a second or two, then a bunch of triangles float on the screen forever and nothing happens.
Ive tried a few unbrick utilities but it keeps saying it cant find the device. Im having troubles booting into recovery mode. (the utility says device not found)
This isnt even my Kindle Fire and its causing me so many problems >.>

Justos said:
I was told to post this here:
The Problem:
I tried to take the crappy amazon software that only works in the US off this kindle fire, Installed JandyKane and Gapps with no problems (i cleared dalvik cache, regular cache, and factory reset) Also installed Clockwork Recovery (which i read somewhere that might have been the problem).
(note: I used the KF utility)
Now when i turn the device on, it shows the Kindle fire logo for a second or two, then a bunch of triangles float on the screen forever and nothing happens.
Ive tried a few unbrick utilities but it keeps saying it cant find the device. Im having troubles booting into recovery mode. (the utility says device not found)
This isnt even my Kindle Fire and its causing me so many problems >.>
Click to expand...
Click to collapse
Is this what you're refering to when you say you see floating triangles?
http://androidbootanimation.com/wp-content/uploads/2012/08/nexus-7-bootanimation.jpg
If so, That is the jandycane/Jellybean Boot animation. On first boot that could take a few minutes before it finishes. It does, however, sound like you are having other problems... have you tried contacting the kindle using fastboot?
Also, I would highly suggest flashing TWRP (team win recovery project) rather than CWM on the Kindle Fire, on most devices I would recommend CWM but on this one it doesn't work as well and leads to problems >>
I also assume that you flashed firefirefire because you said you saw the kindlefire logo before it went to the triangles so you should be fine on that front.

nschiwy said:
Is this what you're refering to when you say you see floating triangles?
If so, That is the jandycane/Jellybean Boot animation. On first boot that could take a few minutes before it finishes. It does, however, sound like you are having other problems... have you tried contacting the kindle using fastboot?
Click to expand...
Click to collapse
Yes thats it! Im going to leave it on for about 5-15 minutes and see what happens. il let you know
I have tried to boot into fastboot mode with the utility and it says cannot find the file specified.
btw: i dont think i installed firefirefire...
EDIT: Yep, after letting the animation run for 10 minutes still nothing.
Im going to try using TWRP now. Il let you know if it helped.
EDIT2: Nope im getting random errors in the command prompt. Is it 100% necessary to use this program?

Justos said:
Yes thats it! Im going to leave it on for about 5-15 minutes and see what happens. il let you know
I have tried to boot into fastboot mode with the utility and it says cannot find the file specified.
btw: i dont think i installed firefirefire...
EDIT: Yep, after letting the animation run for 10 minutes still nothing.
Im going to try using TWRP now. Il let you know if it helped.
EDIT2: Nope im getting random errors in the command prompt. Is it 100% necessary to use this program?
Click to expand...
Click to collapse
If you're talking about KFU, then no. It is not 100% necessary, It is just designed to make it easier for users so they don't have to use command prompt on their own. I am uploading KindleADB from the burrito root method to help us with what you need to do. I will post a link here when it is finished uploading. Do you know how to use command prompt/adb at all?
KindleADB.zip: http://www.mediafire.com/?1fb30q3wqf95b3i
download this file and unzip and then place it on the root directory of your C:/ Drive (this is not completely necessary, it is just for convenience)
Then try seeing if your device shows up in adb by typing in:
Code:
cd /
cd kindleadb
adb devices
OR
Code:
cd /
cd kindleadb
fastboot getvar product
Either way you want it to show either a series of numbers or say something like amazon kindle or something to that degree, if it is blank or does not leave the <waiting for device> status then we will need to go in another direction. My suggestion for fastboot would be to turn the kindle completely off and then do those commands and then plug in your kindle when it says <waiting for device>... get back to me on your results and we can go from there

Did both of them. On the first part it says
List of Devices attached: (nothing shows up)
second time i did exactly what you said. it was waiting for device before i turned the kindle on, nothing happened.
EDIT: Okay I tried using the utility again, whenever i try to fastboot or boot into recovery it gives me this error
The system cannot find the path specified.
The system cannot find the path specified.
The system cannot find the path specified.
The system cannot find the path specified.
The system cannot find the path specified.
The kindle has been told to reboot in Fastboot Mode.
Press any key to continue . . .

I'm having the same issue here.
The triangles keep turning and nothing happens.
In the KFU the devices keep showing OFFLINE and Boot Status UNKNOW.
The cd /
cd kindleadb
adb devices
don't show the device and
cd /
cd kindleadb
fastboot getvar product
show waiting for device
Edited:
I dunno what i've done, but im KFU appears Online in normal boot (4000), but the options don't work anymore.

Justos said:
Did both of them. On the first part it says
List of Devices attached: (nothing shows up)
second time i did exactly what you said. it was waiting for device before i turned the kindle on, nothing happened.
EDIT: Okay I tried using the utility again, whenever i try to fastboot or boot into recovery it gives me this error
The system cannot find the path specified.
The system cannot find the path specified.
The system cannot find the path specified.
The system cannot find the path specified.
The system cannot find the path specified.
The kindle has been told to reboot in Fastboot Mode.
Press any key to continue . . .
Click to expand...
Click to collapse
As long as you have CWM instead of TWRP, you're just wasting your time trying to install Jelly Bean. Install TWRP and try again.

same problem
I have the same exact problem with my fire, it happened two days ago but i hadn't seen anyone else with the problem. I couldn't fix it so i ordered a factory cable on ebay, I'm waiting on that now...

no fff? how about just booting to recovery and flashing a new rom after a full wipe or restoring a backup or have the normal ways of doing things just become obsolete lol I mean so you cant flash isc or jelly bean mount your sd card in recovery transfer one of a few different cm7 roms which will flash right on cwmr and your golden ...

Thepooch said:
no fff? how about just booting to recovery and flashing a new rom after a full wipe or restoring a backup or have the normal ways of doing things just become obsolete lol I mean so you cant flash isc or jelly bean mount your sd card in recovery transfer one of a few different cm7 roms which will flash right on cwmr and your golden ...
Click to expand...
Click to collapse
I'm trying to but, but when I try to enter in recovery mode, i get this:
The system cannot find the drive specified.
Failed to Copy 'files\rcmode' to 'data/local/rcmode' : permission denied
unable do chmode /data/local/rcmode: no such file or directory
/system/bin/sh: data/local/rcmode: not found

recovery?
Reinaque said:
I'm trying to but, but when I try to enter in recovery mode, i get this:
The system cannot find the drive specified.
Failed to Copy 'files\rcmode' to 'data/local/rcmode' : permission denied
unable do chmode /data/local/rcmode: no such file or directory
/system/bin/sh: data/local/rcmode: not found
Click to expand...
Click to collapse
i'm seeing that too when i try to change it to recovery on KFU, but now its actually showing adb online and boot status 4000 as oppposed to when it said offline and unknown for me

What are all the ways to boot into recovery mode? It wont do it with the KFU.
I understand what I need to do now, Factory reset, then install TWRP, then firefirefire, then flash the rom and Gapps?
How am i supposed to do this if i cant get into recovery mode?

Justos said:
What are all the ways to boot into recovery mode? It wont do it with the KFU.
I understand what I need to do now, Factory reset, then install TWRP, then firefirefire, then flash the rom and Gapps?
How am i supposed to do this if i cant get into recovery mode?
Click to expand...
Click to collapse
First I would try using the kindle unbrick utility:
I couldn't find the thread for this so I just have it uploaded to my mediafire account: http://www.mediafire.com/download.php?6kxjs8kbmgn8h3l
I also found this Kindle Fire Unbrick Utility, it might actually be a newer version of the one I provided above with a Graphic UI: http://forum.xda-developers.com/showthread.php?t=1428428
If that doesn't work I would suggest trying a linux environment to contact your device, as Android is linux based and therefore can communicate with a linux machine better than a windows machine. (plus drivers are always a giant mess in windows)
Use this guide to make a portable linux box to try to save your kindle:
http://forum.xda-developers.com/showthread.php?t=1670405
If all else fails, you're probably going to need a factory cable to get your Kindle back up and running:
http://forum.xda-developers.com/showpost.php?p=20380015&postcount=9
Once you have this you can run commands from linux very easily to unbrick your kindle. If you need help with this feel free to PM me.

Kindle won't boot **PLEASE HELP**

This all started when I accidentally wiped /system in TWRP. I tried to sideload a .zip but it wouldn't install, then I realized I still had my cm11 images on the internal storage. Got that flashed, then I flashed the gapps. I tried to restart the Kindle from TWRP, then all of a sudden this slide thing came up. It was something that had something to do with SuperSU and the words "Do Not Install" in caps. Also it showed up right as I was sliding to restart. Now it's sitting at the white and orange Kindle Fire startup screen. I hope I'm not bricked, because I don't have access to recovery, I don't have access/money for a fastboot cable, nor can I make one. If I have to, I might be able to make one. Thanks for your help if you can.

kernelpanic_ said:
This all started when I accidentally wiped /system in TWRP. I tried to sideload a .zip but it wouldn't install, then I realized I still had my cm11 images on the internal storage. Got that flashed, then I flashed the gapps. I tried to restart the Kindle from TWRP, then all of a sudden this slide thing came up. The only thing I got from it before it restarted was DO NOT INSTALL and SuperSU, but it showed up right as I was sliding to restart. Now it's sitting at the white and orange Kindle Fire startup screen. I hope I'm not bricked, because I don't have access to recovery, I don't have access/money for a fastboot cable, nor can I make one. If I have to, I might be able to make one. Thanks for your help if you can.
Click to expand...
Click to collapse
This is the screen atm.

kernelpanic_ said:
This is the screen atm.
Click to expand...
Click to collapse
Assuming you have the fastboot drivers installed, this should work even without a fastboot cable. First, unplug your kindle from the USB cable and make sure it's completely powered off. Next, in a command prompt (Windows) or a Terminal (Ubuntu), type "fastboot -i 0x1949 getvar product" without quotes, and press enter. You should see a message looking like "< waiting for device >", plug your kindle in if so. The kindle should now display the orange-and-white logo like in your screenshot, and then after a few seconds, it should change into a "fastboot mode" screen. If you can get this far, then you shouldn't be completely bricked.