Develop Bugs

Major problems! Phone completely bricked nothing is fixing! Please help

I pulled my phone out of my pocket it and saw that it was on the HTC boot screen. It stayed like the for a while so i shut it down using Power, Volume UP&Down.
I tried to boot again but was freezing at the HTC boot screen.
I booted into recovery and it said it couldnt load /cach/x (command and log and last_log)
Ive tried everything from flashing RUU to new HBOOTS, nothing is working.
Now my laptop keeps saying a USB port is malfunctioning everytime i plug the phone in.
Im two seconds away from smashing this with a sledgehammer.
I was running Aeroevan's Unofficial CM10 Jelly Bean With the v12 Kernel w/ Video Drivers.

Have you tried the pg32img in bootloader?
Sent from my DROID SPYDER using Tapatalk 2

jamminjon82 said:
Have you tried the pg32img in bootloader?
Sent from my DROID SPYDER using Tapatalk 2
Click to expand...
Click to collapse
Yes, when i go to install it, it does a few things.
It p****s the zip
bypasses the bootload
and freezes at boot saying updating and at the bottom is says can not roll back hboot version.
Its been at this screen for about 45 minutes THIS TIME

May have to try one of the methods of bringing it back to stock. There is a good tutorial on rootzwiki. I'll post the link in a sec..
EDIT: Here you go. Follow everything to the T.
http://rootzwiki.com/topic/1579-how-to-restore-to-stock-from-alpharevx-incredible-2-vivow-only/
Sent from my Incredible 2 using Tapatalk 2

dirtsky said:
May have to try one of the methods of bringing it back to stock. There is a good tutorial on rootzwiki. I'll post the link in a sec..
EDIT: Here you go. Follow everything to the T.
http://rootzwiki.com/topic/1579-how-to-restore-to-stock-from-alpharevx-incredible-2-vivow-only/
Sent from my Incredible 2 using Tapatalk 2
Click to expand...
Click to collapse
The only issue now is I only have FastBoot Support but no ADB support. I have no idea why but my phone only shows up under fastboot devices and not adb devices. so i have no idea how to use that guide

The Inc 2 ports often go bad. Try wiggling and plugging it in not all the way. Also sometimes had to push on the cable and hold for it to recognize the USB.
________________________________
Easy as 3.1415926536

If your phone can be used via fastboot it should be able to via adb. Like CS said, It might be a bad micro-usb slot. I would try wiggling it to see if that helps. Being able to access fastboot means its not bricked, it just might be a hardware failure.

sjpritch25 said:
If your phone can be used via fastboot it should be able to via adb. Like CS said, It might be a bad micro-usb slot. I would try wiggling it to see if that helps. Being able to access fastboot means its not bricked, it just might be a hardware failure.
Click to expand...
Click to collapse
I did??
Sent from Kangdemnation

CondemnedSoul said:
I did??
Sent from Kangdemnation
Click to expand...
Click to collapse
What happens when you type
adb devices?
what about fastboot devices.
If you can do one you should be able to do the other, but i'm not sure how you have your adb folders setup. Its a weird error. Can you explain your setup some more.

sjpritch25 said:
What happens when you type
adb devices?
what about fastboot devices.
If you can do one you should be able to do the other, but i'm not sure how you have your adb folders setup. Its a weird error. Can you explain your setup some more.
Click to expand...
Click to collapse
When i type in Fastboot device my phone shows up, but when i type in adb devices it doesnt. i set up the android sdk and assorted tools the way i always have because i use them for development in eclipse, but ive never had a problem with adb before.

sjpritch25 said:
What happens when you type
adb devices?
what about fastboot devices.
If you can do one you should be able to do the other, but i'm not sure how you have your adb folders setup. Its a weird error. Can you explain your setup some more.
Click to expand...
Click to collapse
this is what it should look like.

CondemnedSoul said:
I did??
Sent from Kangdemnation
Click to expand...
Click to collapse
Lol I think he had just looked at your contact picture. They look very similar at a glance

If your phone isn't booting past HTC screen it won't usually show up as an adb device.
Are you s-off?
Have you tried the return to stock that I posted?
http://forum.xda-developers.com/showthread.php?t=1599767
This does not change hboot version so you shouldn't get that error but will put un-rooted stock and stock recovery back on your phone. Then you can install custom recovery, flash su bins and be ready to go again...... hopefully

CondemnedSoul said:
If your phone isn't booting past HTC screen it won't usually show up as an adb device.
Are you s-off?
Have you tried the return to stock that I posted?
http://forum.xda-developers.com/showthread.php?t=1599767
This does not change hboot version so you shouldn't get that error but will put un-rooted stock and stock recovery back on your phone. Then you can install custom recovery, flash su bins and be ready to go again...... hopefully
Click to expand...
Click to collapse
Everything i try keeps freezing in the bootloader screen when i go to install any RUU or image file or zip including that PG32IMG thing or whatever.
My phone recognizes it in fastboot but not adb.
I am S-Off. I rooted the phone the day i got it 6 months ago and have flashed a new rom weekly. never had a problem like this before.

dirtsky said:
May have to try one of the methods of bringing it back to stock. There is a good tutorial on rootzwiki. I'll post the link in a sec..
EDIT: Here you go. Follow everything to the T.
http://rootzwiki.com/topic/1579-how-to-restore-to-stock-from-alpharevx-incredible-2-vivow-only/
Sent from my Incredible 2 using Tapatalk 2
Click to expand...
Click to collapse
The download links in this do not work or else id try that too.

Try it
Try putting a random rom on the Sd of the phone then try and get it to root ClockWork through the volume down method. Wipe and run the other Rom. try it ive been stuck before and it sounds something like this

flydoug9 said:
Try putting a random rom on the Sd of the phone then try and get it to root ClockWork through the volume down method. Wipe and run the other Rom. try it ive been stuck before and it sounds something like this
Click to expand...
Click to collapse
Yes i would try this except ClockWorkMod isnt working when i attempt to boot into it. It starts to load then freezes.

I'm having this very same issue. Turned the phone off Friday night, turned it on Saturday morning to the white HTC screen. Stock RUUs don't do anything.
Sent from my Ally using xda app-developers app

TheValk said:
I'm having this very same issue. Turned the phone off Friday night, turned it on Saturday morning to the white HTC screen. Stock RUUs don't do anything.
Sent from my Ally using xda app-developers app
Click to expand...
Click to collapse
Yeah i've been trying everything. When i install any RUU or anything it keeps getting hung up at recovery and i tried flashing that seperately and that isnt doing anything.

Have you tried doing anything in fast boot like wiping data and cache?
Sent from my Incredible 2 using xda premium

[Q] Help to fix my phone

I used a video to unroot my phone and now it will not come out of boot mode, I turn it on it acts like it is booting up but never does just stays in the same position. and when I try to go into fastboot mode I get an error, it shows an android laying down and a red triangle over him how do I fix this? PLEASE HELP

follow this exactly as its written: http://forum.xda-developers.com/showthread.php?t=1626895

I will try this, but I am not sure that the computer is reading the phone, I can get odin to work but it is not helping I tried putting stock files using odin but same thing. when i tried cmd and fastboot devices it brings up nothing

when I plug my phone in my computer does not recognize it, now what do I do?

Zepius said:
follow this exactly as its written: http://forum.xda-developers.com/showthread.php?t=1626895
Click to expand...
Click to collapse
did everthing step by step, I am able to see the device in my device manager, but when I get to the part where I put it in bootloader and and type fastboot devices it does not recognize it. any suggestions?

pamelak38 said:
did everthing step by step, I am able to see the device in my device manager, but when I get to the part where I put it in bootloader and and type fastboot devices it does not recognize it. any suggestions?
Click to expand...
Click to collapse
You need to install the fastboot driver.
Sent from my Galaxy Nexus using Tapatalk 2

Petrovski80 said:
You need to install the fastboot driver.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
I cannot turn my phone on to put it on usb debugging, could this be my problem? and how do I install fastboot driver I thought I had it with sdk tools

pamelak38 said:
I cannot turn my phone on to put it on usb debugging, could this be my problem? and how do I install fastboot driver I thought I had it with sdk tools
Click to expand...
Click to collapse
When you are booted into bootloader but a "fastboot devices" does not list your device, it's almost always caused by having installed either no driver at all or the wrong one. Use the naked driver, follow the link in my signature to find it.
Sent from my Galaxy Nexus using Tapatalk 2

Petrovski80 said:
When you are booted into bootloader but a "fastboot devices" does not list your device, it's almost always caused by having installed either no driver at all or the wrong one. Use the naked driver, follow the link in my signature to find it.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
Ok I got it up and running! My only concern is I did every step but the radio step failed every time, is this a problem?????
THANK YOU SO MUCH, I HAVE LEARNED A LOT FROM THIS!!

pamelak38 said:
Ok I got it up and running! My only concern is I did every step but the radio step failed every time, is this a problem?????
THANK YOU SO MUCH, I HAVE LEARNED A LOT FROM THIS!!
Click to expand...
Click to collapse
Lte radio? Anyway if your connection is ok I'd say it's not an issue.
Good you figured it out.
Sent from my Galaxy Nexus using Tapatalk 2

still cant get into recovery mode
can anyone help, I got the phone back to where I can get into it, but if I try to go into recovery mode I still get the dead android with the red triangle and can anyone tell me where to find a lte radio

pamelak38 said:
can anyone help, I got the phone back to where I can get into it, but if I try to go into recovery mode I still get the dead android with the red triangle and can anyone tell me where to find a lte radio
Click to expand...
Click to collapse
What you see is the stock recovery. Android will flash it back automatically even after you've flashed a custom recovery. To prevent this, you must either rename/delete /etc/install-recovery.sh OR rename/delete /system/recovery-from-boot.p.
LTE radios are in the factory images. Read this: http://forum.xda-developers.com/showthread.php?t=1626895

Petrovski80 said:
What you see is the stock recovery. Android will flash it back automatically even after you've flashed a custom recovery. To prevent this, you must either rename/delete /etc/install-recovery.sh OR rename/delete /system/recovery-from-boot.p.
LTE radios are in the factory images. Read this: http://forum.xda-developers.com/showthread.php?t=1626895
Click to expand...
Click to collapse
Ok, I have never had to rename/delete,ect before, can you help walk me thru that, I know I am asking a lot but I would sure appreciate it

pamelak38 said:
Ok, I have never had to rename/delete,ect before, can you help walk me thru that, I know I am asking a lot but I would sure appreciate it
Click to expand...
Click to collapse
Do you have root? In that case it's a matter of launching your file manager.
Sent from my Galaxy Nexus using Tapatalk 2

Petrovski80 said:
Do you have root? In that case it's a matter of launching your file manager.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
Yes I have root, now what do I need to do?

pamelak38 said:
Yes I have root, now what do I need to do?
Click to expand...
Click to collapse
Navigate to the folder /etc with a file manager. Remount with RW rights (root explorer has a convenient button for this) and rename the file install-recovery.sh to install-recovery.sh.bak.
Then reflash a custom recovery. This time it will stick.
Sent from my Galaxy Nexus using Tapatalk 2

Petrovski80 said:
Navigate to the folder /etc with a file manager. Remount with RW rights (root explorer has a convenient button for this) and rename the file install-recovery.sh to install-recovery.sh.bak.
Then reflash a custom recovery. This time it will stick.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
I got it back to stock and locked, THANK YOU so much you are awesome!!!!

No operating system on phone

I did a factory reset on my galaxy nexus. I also by mistake erased my internal SD card. So now my phone only boots as far as the google screen because there is not ROM to boot into and when you connect to a computer it doesn't recognize the phone. How do I get a rom on my phone so it works again.
Thanks
Sent from my HTC-X710a using XDA Premium App

AshleyPem28 said:
I did a factory reset on my galaxy nexus. I also by mistake erased my internal SD card. So now my phone only boots as far as the google screen because there is not ROM to boot into and when you connect to a computer it doesn't recognize the phone. How do I get a rom on my phone so it works again.
Thanks
Sent from my HTC-X710a using XDA Premium App
Click to expand...
Click to collapse
Can you boot into fastboot? (Hold the power button and both volume buttons). I would boot into fastboot and reflash the Stock images. Also want to specify which variant you have.. GSM or CDMA if CDMA, verizon or Sprint?

Factory reset from stock or a custom recovery will not wipe the system partition. If you formatted the system partition from a custom recovery you can boot back into the custom recovery and adb push a ROM to your sdcard

Install the drivers on the computer. Then put the phone in fastboot mode like uber mentioned. Then push the rom to the phone and flash it in recovery. If you didnt install a recovery either, youll need one of those too.
Yeah hard to tell by her post if her bootloader is unlocked or not. I didnt think it was possible to wipe system without unlocking the boot loader and flashing a new recovery. Which means she needs knowledge of fastboot to even set that up.
The more i read the OP the more it sounds like unless she bought a used rooted phone off ebay. This thing is stock and just needs to boot to stock recovery and perform a factory reset from there. And that her system is fine.
With then phone off, hold down both volume buttons. Then hold down the power button, once it boots , use the volume keys to cycle and the power button to select. Navigate to recovery and perform a factory reset.
Sent from my Galaxy Nexus using Tapatalk 2

Lol i just fixed this on my brothers phone, Odin a stock tar, then reroot/install and CWM
Sent from my Galaxy Nexus using Tapatalk 2

Fire n mage said:
Lol i just fixed this on my brothers phone, Odin a stock tar, then reroot/install and CWM
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
No.

Thanks for all the replies. My bootloader is unlocked. I'll give it a try and let you know how it turns out, thank you
Sent from my HTC-X710a using XDA Premium App

Also my phone was rooted and GSM
Sent from my HTC-X710a using XDA Premium App

AshleyPem28 said:
Also my phone was rooted and GSM
Sent from my HTC-X710a using XDA Premium App
Click to expand...
Click to collapse
Doesn't matter if its GSM or rooted. Fastboot is independent.

I can boot into fastboot and clockworkmod recovery, but the SD storage is blank. The computer won't recognize the phone. I can't seem to fix it and it's driving me crazy not having a phone. Please help!!
Sent from my HTC-X710a using xda premium

Plug in your phone via USB, in Fastboot mode.
Does it show in the device manager? It might not be called 'Galaxy Nexus', might be called something Fastboot related. It might be in the USB section.
XP:To open Device Manager, click Start, and then click Control Panel. Click Performance and Maintenance, and then click System. On the Hardware tab, click Device Manager.
7: Hit windows key, type in "Device Manager"
If there's a yellow triangle next to the device, the drivers on your PC may be not working correctly.
If it is working correctly, the easiest option is to load the Galaxy Nexus Toolkit, and flash stock ROM.

You installed the drivers as mentioned I take it?

AshleyPem28 said:
I can boot into fastboot and clockworkmod recovery, but the SD storage is blank. The computer won't recognize the phone. I can't seem to fix it and it's driving me crazy not having a phone. Please help!!
Sent from my HTC-X710a using xda premium
Click to expand...
Click to collapse
[HOW-TO] [GSM & CDMA] Convert to latest yakju/takju/mysid (incl JB) / Return to stock
Take a look at step A. Install the drivers. Note you should also be able to set up the adb drivers while your phone is booted into a custom recovery.

follow the instructions here: https://developers.google.com/android/nexus/images

Install the drivers, then flash the stock image in fastboot, nothing to it.

Whoa there are females on this forum!!!!????? <Sound of a hundred myths shattering>
But anyway, why dont u just flash fastboot stock images?
Whoops, ninja'ed.

psycho2097 said:
females
Click to expand...
Click to collapse
Pluralizing the word is likely over-optimism on your part :laugh:

CMNein said:
Pluralizing the word is likely over-optimism on your part :laugh:
Click to expand...
Click to collapse
Damn, it's getting sexist!

Mach3.2 said:
Damn, it's getting sexist!
Click to expand...
Click to collapse
Well its bound to when there's 40k males n 40 females(i m taking 1-2 per current device)
THIS. IS. NEXUS.

Ash just install the drivers for the galaxy nexus, download a rom like aokp (the "maguro" version is the gsm version. Dont flash "toro" versions those are for cdma ) and then push it to the sd card using fastboot. All those steps are listed in a lot of posts in great detail by the author mskip and are stickied in the dev section here. Just read his posts for questions or drivers . Its all pretty straight forward once you read the right posts. Id avoid using any toolkits though, its all fairly simple stuff. And dont worry about the geeks here being surprised about seeing females. Some of them have never left the basement before. ( no offence guys , i got no problem with the homosexuals )
Sent from my Galaxy Nexus using Tapatalk 2

Wanted: Step-by-step noob guide to re-locking and returning to stock

Bit of background
I rooted initially using wugfresh toolkit.
Tried re-locking a few times using wugfresh, would get to end of process and nothing happened.
I need to re-lock the device and flash the factory rom asap. Not sure if I have adp or fastboot since I used the tool.
Can anyone point me in the right direction? I'm on windows 7 if that matters at all.
Thank you for your patience and assistance.

theboywonder said:
Bit of background
I rooted initially using wugfresh toolkit.
Tried re-locking a few times using wugfresh, would get to end of process and nothing happened.
I need to re-lock the device and flash the factory rom asap. Not sure if I have adp or fastboot since I used the tool.
Can anyone point me in the right direction? I'm on windows 7 if that matters at all.
Thank you for your patience and assistance.
Click to expand...
Click to collapse
Return to stock thread in general. Search is hard
Sent from my Galaxy Nexus using Tapatalk 4

Zepius said:
Return to stock thread in general. Search is hard
Sent from my Galaxy Nexus using Tapatalk 4
Click to expand...
Click to collapse
im trying to install the SECOND DRIVER and having issues. im in fastboot (i think, the screen with the android's stomach open)
unfortunately, in device manager there isn't anything that's unrecognized so i can't get the second driver installed.
any assistance?

Try this. http://forum.xda-developers.com/showthread.php?t=2387088
[Q] Need to go back to Stock Rom without USB
Sent from my Galaxy Nexus using XDA Premium 4 mobile app

Volte/Advanced calling fix

Here's a fairly simple fix to a lingering issue that affected the VZW m9. The fix came about during a discussion with the repair efforts @beaups made on one of the many phones that either end up without service or dead in his hands. Guess you could say this was a lemons to lemonade moment. The key to this was the realization that unlike the m8, the stock recovery on the m9 forward NO LONGER resets the golden nv radion settings. This process will do just that....
Remove volte from account. (If already enabled).
Then latest ruu and factory reset
Run this fastboot commands while booted to the white bootloader screen. For the HTC 10 remove the _ from the modem name.
fastboot erase modem_st1
fastboot erase modem_st2
Then reboot and try volte activation.

Thanks for this, will be testing out once i have the chance to go through the process.

Hey gang-
Just wanted to drop a note that i'm moving on. As such, I have requested my threads to be closed as I won't be around to support them much anymore. Any download links (if applicable) will also be removed shortly as well.
Thanks and peace out.

@dottat thanks for reopening the thread and I know you don't offer much support but could you shed some light on the details on how to remove Volte from your account and if you can flash custom ruu vs going back to stock and flashing stock ruu with stock recovery.
Sent using Tapatalk

I did the steps and I get "We encountered a problem activating Advanced Calling 1.0. Please try again later." Any ideas @dottat?
EDIT: Went to my account and enabled it on VZW. Rebooted my device and it was enabled on my device. Awesome!

Flyhalf205 said:
I did the steps and I get "We encountered a problem activating Advanced Calling 1.0. Please try again later." Any ideas @dottat?
EDIT: Went to my account and enabled it on VZW. Rebooted my device and it was enabled on my device. Awesome!
Click to expand...
Click to collapse
How did you deactivate it? Did you flash custom ruu or stock
Sent using Tapatalk

Tommydorns said:
How did you deactivate it? Did you flash custom ruu or stock
Sent using Tapatalk
Click to expand...
Click to collapse
I deactivated using the MyVerizon app. Once loaded up just turn deactivate the feature.

Flyhalf205 said:
I deactivated using the MyVerizon app. Once loaded up just turn deactivate the feature.
Click to expand...
Click to collapse
OK. Thank you what about the ruu which one did you flash? Are you using the new venom rom
Sent using Tapatalk

Tommydorns said:
@dottat thanks for reopening the thread and I know you don't offer much support but could you shed some light on the details on how to remove Volte from your account and if you can flash custom ruu vs going back to stock and flashing stock ruu with stock recovery.
Sent using Tapatalk
Click to expand...
Click to collapse
The basic premise of this fix has nothing to do with stock recovery. It's actually about doing what stock recovery USED to do for us. It used to reset nv radio info by wiping the modems during a factory reset. It no longer does so manually wiping them does the same thing. You probably could do it without RUU'ing as long as you know you are on vzw firmware/radios only.

Tommydorns said:
OK. Thank you what about the ruu which one did you flash? Are you using the new venom rom
Sent using Tapatalk
Click to expand...
Click to collapse
I used the only one that is available right now. I use my own stock rom.

dottat said:
The basic premise of this fix has nothing to do with stock recovery. It's actually about doing what stock recovery USED to do for us. It used to reset nv radio info by wiping the modems during a factory reset. It no longer does so manually wiping them does the same thing. You probably could do it without RUU'ing as long as you know you are on vzw firmware/radios only.
Click to expand...
Click to collapse
Thank you for the clarification. I thought I had to go back to stock rom, that's why I thought stock recovery. So as long as I have Verizon firmware / radios I can those fast boot flash those commands on Viper 5.0 after removing HD voice from my plan than reactive it after the commands ...
Sent using Tapatalk

Tommydorns said:
Thank you for the clarification. I thought I had to go back to stock rom, that's why I thought stock recovery. So as long as I have Verizon firmware / radios I can those fast boot flash those commands on Viper 5.0 after removing HD voice from my plan than reactive it after the commands ...
Sent using Tapatalk
Click to expand...
Click to collapse
Can't hurt it...

dottat said:
Can't hurt it...
Click to expand...
Click to collapse
OK... After setting up adb and fastboot, deactivating HD voice, putting the phone in Download Mode, making sure fastboot works by testing the reboot command. I tried those commands and it's basically saying that "erase" is not a valid command for modem_st1 and modem_st2 in CMD. Rebooted and reactivated HD voice on plan and phone and trying and it's saying I don't have a Verizon SIM on the phone, (It was saying this before) so I reboot to get data working again. I'm still on Viper 5.0. I did flash the Marshmellow RUU before flashing 4.3 back in February. Could I have lost a radio or something. @hallstevenson did you ever try it and get it to work?
Sent using Tapatalk

Tommydorns said:
OK... After setting up adb and fastboot, deactivating HD voice, putting the phone in Download Mode, making sure fastboot works by testing the reboot command. I tried those commands and it's basically saying that "erase" is not a valid command for modem_st1 and modem_st2 in CMD. Rebooted and reactivated HD voice on plan and phone and trying and it's saying I don't have a Verizon SIM on the phone, (It was saying this before) so I reboot to get data working again. I'm still on Viper 5.0. I did flash the Marshmellow RUU before flashing 4.3 back in February. Could I have lost a radio or something. @hallstevenson did you ever try it and get it to work?
Sent using Tapatalk
Click to expand...
Click to collapse
Take away the _ on the modem name
Sent from my HTC6545LVW using Tapatalk

dottat said:
Take away the _ on the modem name
Sent from my HTC6545LVW using Tapatalk
Click to expand...
Click to collapse
Thank you for the help.. It's keeps telling me failure, erase st1 is not supported. It will also say partition table does not exist. Ive verified I do have the corrected radio and firmware. I've tried both commands with modemst1 and modem_st1 with the same failure message in CMD.
Sent using Tapatalk

Tommydorns said:
Thank you for the help.. It's keeps telling me failure, erase st1 is not supported. It will also say partition table does not exist. Ive verified I do have the corrected radio and firmware. I've tried both commands with modemst1 and modem_st1 with the same failure message in CMD.
Sent using Tapatalk
Click to expand...
Click to collapse
In bootloader or download mode?
Sent from my HTC6545LVW using Tapatalk

Both. It doesn't have a fastboot where it says fastboot mode like on previous devices so I take it you use download mode. So I tried it in both. fastboot reboot command works in both modes.
Sent using Tapatalk

Tommydorns said:
Both. It doesn't have a fastboot where it says fastboot mode like on previous devices so I take it you use download mode. So I tried it in both. fastboot reboot command works in both modes.
Sent using Tapatalk
Click to expand...
Click to collapse
You are doing it wrong.
Sent from my HTC6545LVW using Tapatalk

Oh Ok, what am I doing wrong? I would love to get this to work. Thank you for your help.
Sent using Tapatalk

dottat said:
You are doing it wrong.
Sent from my HTC6545LVW using Tapatalk
Click to expand...
Click to collapse
OK, these are my steps, USB debugging enabled on Dev Options. Disabled HD Voice from My Verizon go into bootloader hook phone to PC type in CMD Those commands it says FAILED (remote: Partition modest 2 erase not supported) I've also typed in fastboot oem rebootRUU which it takes me to a blank screen HTC logo on it and gives me a warning then I typed those commands still same Failed message in CMD. Is there something I'm missing. Haven't had anybody come out and say they were successful. Only thing I haven't done it go all to stock RUU bit I have the latest radios and firmware so I don't know
Sent using Tapatalk