A friend gave me a (seemingly working - it vibrates when you press the power button) HTC G2, apart from the screen; the previous owner dropped the phone, left a crack diagonally down the screen, and it remains blank when powered on.
Anyway, I already have a G2 and a Nexus, and don't really have a use for it, so I wouldn't mind selling it, but if I can replace the screen and get it fully working I'm sure it would sell for more. Any idea how much a screen replacement for it should cost? I have quite a few cell phone repair shops in my area, but no idea if all of them charge a lot more than they should for it or something (and I can just go a little out of my way to save a lot or something).
not sure how much it would cost to have someone else fix your phone but parts are cheap and fairly easy to replace. if you have a g2 that's fully working you may want to use it to test what needs replaceing on the broken one. it sounds like you need a digitizer about $20 on ebay and then either a lcd or flex cable. lcd is about $25 and flex about $35. I would start out by swapping the lcd from the good to the bad and see if it lights up, if not you would have to buy the flex. there are video walk throughs on you tube how to do this
Sent from my HTC Vision using xda premium
Call the shops and ask. I got my water damaged g2 fixed for 70. Including parts, labor, and a new battery
Sent from my SGH-T999 using xda premium
Related
Ive never dropped a cellphone but today was that day. I had bought an invisible shield to put it on today when i got home. Right when i got home i put the phone in my pocket but it had it had hole. BAM. it dropped down my leg and hit the concrete face down. It shattered the digitizer but the lcd is intact. My question was, would i be able to buy a digitizer and change it without having to pay 180 for a new digitizer/lcd ? any help would be appreciated.
Sent from my SGH-T999 using xda app-developers app
I'm fairly sure I've read that the digitizer is fused with the screen.
Yeah there's no way going around it. They're glued together as one piece.
FFFFFFFUUUUUUUU dammit
Sent from my SGH-T999 using xda app-developers app
I spoke to some rep from samsung yesterday on my phone and they said it would be 179.99 to fix it. But my question is, do i have to include the lcd ? Because my lcd isnt broke and they sell the glass on ebay for 20 bucks. I would rather try and fix it myself and break it, THEN send it to samsung if i cant fix it instead of paying 180 bucks for just some glass since my lcd is not broken and have them rip me off because they will def reuse my lcd and win anyways.
kobe4rings said:
I spoke to some rep from samsung yesterday on my phone and they said it would be 179.99 to fix it. But my question is, do i have to include the lcd ? Because my lcd isnt broke and they sell the glass on ebay for 20 bucks. I would rather try and fix it myself and break it, THEN send it to samsung if i cant fix it instead of paying 180 bucks for just some glass since my lcd is not broken and have them rip me off because they will def reuse my lcd and win anyways.
Click to expand...
Click to collapse
It's been answered.. if you want to do it yourself you're going to end up breaking your LCD and need to buy the part or send it to Samsung anyways. There is no way around it.
There is a video on YouTube with somebody changing only the glass. Check on YouTube so you will have an idea about how to do it and if you will be able.
Sent from my GT-I9300 using Tapatalk 2
I dont believe they are "fused" together. from my history in repairing phones, there is just a small sliver of double sided tape holding the digitizer to the LCD screen. and all you need to do is use a plastic seperating tool to slowly seperate the two. Also, use a good hot hair dryer to help melt away the adhesive. good luck!
Go to a hardware store and pick up a heat gun. Take the phone completely apart, take out all the electronics. Heat the screen evenly and slowly start pulling the screen up little by little while hitting it with the heat gun.
Take your time and don't rush. It can be done but it's not easy and can damage the LCD.
Sent from my SGH-T999 using Tapatalk 2
If you do this HEAT the **** out of the LCD and digitizer. It will be very hard to separate the two. Please take pictures and tell us you're approach to help other S3 users.
I had a long ass post written but now it's gone. boo.
anyways. Here's something to consider as to why you can't separate it. If you believe there's a way to get around it then good luck.
http://www.youtube.com/watch?v=es8gezSdKv4&feature=youtu.be
Dropped my phone on asphalt today and got a big hairline crack across the screen . (Attached pics)
It really hurts cause i always baby this phone and just the rush to get to work and in my car, completely missed my pocket.
The screen is still responsive to touch and seems to be working normal thank god the lcd screen wasnt damaged and the digitizer didn't shatter.
Got a few questions t
1) just wanted to clarify that the digitizer lies ontop the LCD screen?
2) and that is all that needs replacing?(from damage seen in the pics)
3) also mine is branded just HTC(no carrier, so it's international GSM version?)
4) would it matter if i bought a replacement digitizer meant for the at&t version or not?
5) should be getting a one x that had some water damage and is no longer working. would the digitizer from this phone be a viable option for me to use as a replacement or should i just order the part online.( I really want it replaced fast and if i have to order the replacement it will take about a week to 2 weeks to arrive in my country
so apparently i can't attach any urls until i make 10 posts or i'd show u guys the part i wanted to order but its basically just a screen digitizer from ebay with tools needed for about $17.86.(is that cheap, good or expensive price considering the item + tools)
can you guys please search for it on ebay?the title of the post/part is Touch Screen Digitizer Glass Lens Replacement For HTC One X S720 + Free Tools
the link above is the item i'm looking to order for replacement. is it the right part i'm looking at?and would that be all i need or is there anything else i should add?also quality wise would it be top pick or are there any better options available?
Attached some pics also.Advice would be greatly appreciated.
You are unlikely to be able to separate the digitizer and lcd without damaging the LCD.
A water damaged phone may have a water damaged screen.
Search one of the other broken screen threads for more information.
I've replaced several screens on captivate.easiest way is get replacement(LCD+digetizer) from ebay,Google procedure.watch or read as many times as needed to feel confident to take apart phone.the hardest part is seperating LCD from phone(they use adhesive to secure LCD to phone).I used razor to carefully cut adhesive.
Most components are plug&play.just follow guide completely,u should be fine.
My LCD was $85 on ebay.good luck.
Sent from my SGH-I897 using xda app-developers app
I have an LS970 and I recently dropped it pretty hard onto a desk. The bottom quarter of the screen stopped working after the drop along with the capacitive touch buttons at the bottom. I was able to deal with this but today when I sat on the couch my phone fell again and a crack went down the middle of the digitizer. Now only some areas work and I am not able to unlock it. Before I buy a new digitizer and lcd I want to know if it could have also been main board issues that made the bottom part of the screen not work since no cracks appeared after dropping it on a desk. Thanks
I am about 99% sure its ya digitizer/LCD ... The main bored is tucked well in the middle of the phone ....I have pictures up on the sim card mod thread if u wanna c ...
Sent from my LG-LS970 using Tapatalk 4
Alright thanks. I'll go ahead and order a new lcd/digitizer tonight. I hate how they're combined as my lcd is fine but I'd rather fix it than buy another phone.
Thanks again.
bigfdaddy2 said:
I am about 99% sure its ya digitizer/LCD ... The main bored is tucked well in the middle of the phone ....I have pictures up on the sim card mod thread if u wanna c ...
Sent from my LG-LS970 using Tapatalk 4
Click to expand...
Click to collapse
It's the digitizer. I have a wonderful wife whom I love very much who has broken her screen three times. Each time that the screen broke, the digitizer went with it. It has to do with the fact that there is essentially no separation between the two on our phones, so drops that damage the screen almost always damage the digitizer.
Xiutehcuhtli said:
It's the digitizer. I have a wonderful wife whom I love very much who has broken her screen three times. Each time that the screen broke, the digitizer went with it. It has to do with the fact that there is essentially no separation between the two on our phones, so drops that damage the screen almost always damage the digitizer.
Click to expand...
Click to collapse
I just picked up a broken LG Optimus G off craigslist and toward the bottom of the screen it has a hairline crack. Also the capacitive buttons do not work either....my problem sounds exactly like the OP.
Can anyone suggest a good place to buy a cheap digitizer/glass/ LCD?? I'm lookin on ebay and they seem to be about $80
Thanks,
Kevin
I've been looking around ebay too and they're all about 80 for the cheapest. I checked out a few phone repair websites and prices are much higher there. If you find anything cheaper let me know. I plan on buying it soon.
EDIT: The best I found on ebay was 78 was from the US and 69 from China. I know they are all from china but it's just a shipping time thing.
Nurmi_CEO said:
I just picked up a broken LG Optimus G off craigslist and toward the bottom of the screen it has a hairline crack. Also the capacitive buttons do not work either....my problem sounds exactly like the OP.
Can anyone suggest a good place to buy a cheap digitizer/glass/ LCD?? I'm lookin on ebay and they seem to be about $80
Thanks,
Kevin
Click to expand...
Click to collapse
Based on the dialogue I had when my wife's screen broke not only with the insurance carrier but also a repair shop, replacing the screen or digitizer on this phone is always going to be very expensive because both parts almost always have to be replaced together. $80 sounds very inexpensive to me based on those conversations.
Xiutehcuhtli said:
Based on the dialogue I had when my wife's screen broke not only with the insurance carrier but also a repair shop, replacing the screen or digitizer on this phone is always going to be very expensive because both parts almost always have to be replaced together. $80 sounds very inexpensive to me based on those conversations.
Click to expand...
Click to collapse
U can separate them but their is a special jig that has to be used ....
Sent from my LG-LS970 using Tapatalk 4
Unfortunately I dropped my phone yesterday and I think I broke either the digitizer or lcd or both. Funny thing is the screen didn't break at all. No damage on the outside, but you can see what appears to be some lines (possibly black) under the screen. You used to be able to see the screen (had a lot of distorted colors and lines) and I'd be able to plug in a mouse (unresponsive touch screen) and still use my phone, but just recently my screen won't even turn back on. Did I end up breaking my digitizer and/or lcd? I can confirm that the phone still powers on since I am able to use it via voice commands. I was wondering if any of you had any suggestions? I was going to attempt to repair it, but if it costs me $100+ I may as well just buy a new phone, thinking nexus 5. Anyway, is there anything else I can try?
Thanks
If you broke the LCD and want to replace your self you can buy a kit from Amazon or eBay. They usually have some kits for around $10-$20 if you don't want to pay $100+ for someone then going for a new phone would be a better choice
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Really? I've seen kits going for $100 at the very least. Maybe it was the lcd plus digitizer? How do I find out if my lcd and digitizer are broke or if it's just one of them?
xSharpi said:
If you broke the LCD and want to replace your self you can buy a kit from Amazon or eBay. They usually have some kits for around $10-$20 if you don't want to pay $100+ for someone then going for a new phone would be a better choice
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
If the phone wasn't responding to touches when you were able to see the screen after the drop your digitizer is fubar.
dntesinfrno said:
If the phone wasn't responding to touches when you were able to see the screen after the drop your digitizer is fubar.
Click to expand...
Click to collapse
Ok thanks. Guess it's time to get a new phone.
Im not sure where to put this.
The screen is cracked and the LCD is done also, the phone still rings and makes noise.
Most places want 250 to fix thats 200 more then i paid for the phone.
I searched amazon for a replacement to do myself, however, im not sure what to buy. I do not want to buy the wrong thing.
Anyone have any experience in fixing both screen and LCD, and could point me in the correct direction. Thank you.
Nobody on this site has had this happen to them?
I did. It cost me 200$ to have the official samsung screen put on it. Not the cheap 2$ fix that most people do (which looks like crap, makes the screen less sensitive, less bright, and lets dust between the screen and lcd).
The official samsung screen is pretty much the front half of the phone. Sounds like that's what you need.
And if I remember correctly, the official screen replacement cost is around 150-175$, then the remaining 25-50$ was labor
Sent from my SGH-I747 using xda app-developers app