Related
UPDATED:
Recently many members has posted that they have received these mercury protectors cut short of about 1-2mm and does not have the curved edges, I have personally seen these, and the package looks identical, it is confirmed that these are all authentic, the old version has the curved edges, new version are cut short.
What evers Mercury decisions was, they still have the sticker showing the curved foaming edges.
I would also suggest you contact the seller and ask them to confirm the actual protector are curved, and not based on the sticker.
I just purchased the lime green one for the fun of it, here is a simple review of it.
Before I start, the shop has put this protector on a few phone and has given me a warning about the curve of the protector, with this protector it will fit best with korean version of the S3 or a made in korea unit, as the glass are made in many countries the curve edge of the glass may vary due to specification, this isn't to say that you won't get a perfect fit on a international version or US version.
With the lime green protector that i have purchased, there are cut out for the sensor, camera, home button and the ear piece, the cut out are precise to about 0.2mm which is very good, the curves of the protector is also very good, and does goes right upto the edge of the metal bezel by 0.5mm which is considered one of the best edge to edge coverage.
The actual screen protector is a anti glare and matt finished, and is varly clear.
Does the bullkin have any rainbowing? Im hoping they popup on eBay as Im not a fan of matte protectors.
mbh87 said:
Does the bullkin have any rainbowing? Im hoping they popup on eBay as Im not a fan of matte protectors.
Click to expand...
Click to collapse
Yes they do, you can see the rainbow effect when the screen is turned off, or on a black screen.
kms108 said:
Yes they do, you can see the rainbow effect when the screen is turned off, or on a black screen.
Click to expand...
Click to collapse
Guess I should have read the review a little better, just noticed that you had already mentioned. Is it pretty bad or only only noticeable at extreme angles?
mbh87 said:
Guess I should have read the review a little better, just noticed that you had already mentioned. Is it pretty bad or only only noticeable at extreme angles?
Click to expand...
Click to collapse
I would say only if you shine a light against it or the sun.
kms108 said:
I would say only if you shine a light against it or the sun.
Click to expand...
Click to collapse
I shall continue my hunt for one then. I can deal with that. Not a fan of this Pebble Purple Samsung went with.
That's fantastic. I guess I'll check and see if I can get the red Bulkin one.
Does the black have a metallic finish like the Mercury brand?
Sorry if it was mentioned, didn't read the whole review
Edit: it is a solid color, thanks
A great review/overview, thanks - its a real shame that it's so difficult to find both of these (fully curved and fitting) online anywhere...
One question, just curious - you mention that you can get 4 Bullkin protectors for the price of 1 Mercury - what was the price of both protectors? (mercury seem to be around the $10 USD mark on ebay...)
Sent from my GT-I9300 using Tapatalk 2
beaver2233 said:
A great review/overview, thanks - its a real shame that it's so difficult to find both of these (fully curved and fitting) online anywhere...
One question, just curious - you mention that you can get 4 Bullkin protectors for the price of 1 Mercury - what was the price of both protectors? (mercury seem to be around the $10 USD mark on ebay...)
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
The price of my mercury was USD 11.5, I know on ebay the prices has dropped a little, but those on ebay, you're not sure if you will get the flat one or curved one, But for me, I buy direct from a local store, so I see the item before I make the purchase, the extra cost is worth it, if i'm sure to get the proper curved screen protector.
These bullkin only cost approximate USD 2.5 which are wholesale price.
first post updated with more information.
Can't wait to see what the reviews are going to be like. They look pretty nice!
kms108 said:
The price of my mercury was USD 11.5, I know on ebay the prices has dropped a little, but those on ebay, you're not sure if you will get the flat one or curved one, But for me, I buy direct from a local store, so I see the item before I make the purchase, the extra cost is worth it, if i'm sure to get the proper curved screen protector.
These bullkin only cost approximate USD 2.5 which are wholesale price.
Click to expand...
Click to collapse
Thanks a lot - yeah I've being holding off buying from eBay due to reports of them not being curved and wow that's cheap!
Sent from my GT-I9300 using Tapatalk 2
@kms108
First thing. I envy you. I had my cousin in korea send me a mercury from there and still same issue with the gap. Second, have you seen these screen protectors in china? I've asked my cousin about them but she hasnt seen them in stores.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=280934039929&var=580120833302
I would love to get these if you've seen them with full coverage.
rlatjs17 said:
@kms108
First thing. I envy you. I had my cousin in korea send me a mercury from there and still same issue with the gap. Second, have you seen these screen protectors in china? I've asked my cousin about them but she hasnt seen them in stores.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=280934039929&var=580120833302
I would love to get these if you've seen them with full coverage.
Click to expand...
Click to collapse
I've also seen the mercury in china, all short without curved edge, wholesale price at less than USD 4, and no, i haven't seen the bulletproof one's yet, maybe they are just new boys on the street, may be later on.
rlatjs17 said:
@kms108
First thing. I envy you. I had my cousin in korea send me a mercury from there and still same issue with the gap. Second, have you seen these screen protectors in china? I've asked my cousin about them but she hasnt seen them in stores.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=280934039929&var=580120833302
I would love to get these if you've seen them with full coverage.
Click to expand...
Click to collapse
ignore this.
rlatjs17 I ordered one of those glasszone protectors, I'll post about it when i get it in my own thread.
those are nice! i just ordered my pb sgs3 and will probably buy one of theses. OP, sorry if i missed it in the FP but which one did you like more? thanks for your review
So the real Mercury ones have almost full coverage with curved screen if I have understand it well?
I'm looking for one with full coverage because like with the SGP I would have an ugly gap between my bumper and the glass protector then.
Looks promising, but I keep buying screenprotectors these days in the search for a good one
Send from my GT-I9300 with Tapatalk
Those Bullkin protectors looks promising. They are not that expensive and the quality looks good.:good:
So in around 2-3 weeks I will be uploading a new unboxing and review of one of the four brands listed above. If you have an opinion of which one I should get, then post what you think in the thread. I am leaning towards the ArmorSuit. This thread will look similar to my other thread about accessories. Here is the link for the other thread.
In the mean time, look at that thread
Oct. 9: I ordered the Skinomi. The unboxing and install video will come next week.
Oct. 17: Unboxing coming this Friday, October 19!
Oct. 19: I applied the screen protector and made an unboxing and applying video. Now I have to wait for 5 hours to turn my phone on . When it is done drying, i will make a second part of the video. So basically, it will be one 10-15 min long video.
Oct. 19: Here is the unboxing and applying video
I use the armor suite its great easy to put on and smooth as butter. And life time replace ments u can't go wronge
kitila said:
I use the armor suite its great easy to put on and smooth as butter. And life time replace ments u can't go wronge
Click to expand...
Click to collapse
OK thanks. Can you tell me EXACTLY how you installed it so i don't get it wrong? Also, I have dead pixels on my screen. Will the Armor Suit cover them?
Sent from my SAMSUNG-SGH-T989 using xda premium
Have you looked at Skinomi? That is what I use, and LOVE them
idbl_fanatic said:
Have you looked at Skinomi? That is what I use, and LOVE them
Click to expand...
Click to collapse
They are my second choice. I just forgot to out them in the title. In a little bit I will get back and post what I will get. If I get the Skinomi and don't like it, I will get the Armor Suit and Vice Versa.
Edit: How hard was it to put on? Also, i have dead pixels on my screen so would the Skinomi cover them? That is also a big factor for me.
Sent from my SAMSUNG-SGH-T989 using xda premium
I decided on the ArmorSuit for a couple of reasons. I was reading some threads earlier that said that the Skinomi Skin's are beeter than ArmorSuit's Skin's. I also read in the same thread that ArmorSuit's Screen Protectors are better than the Skinomi Screen Protectors. I am only getting a screen protector because I already have a case. So the obvious winner is the ArmorSuit. I also read that the ArmorSuit has more items in the kit that it comes in. It has a "lint-free (lol)" cloth and the squeegee in the ArmorSuit is better. The cloth isn't really important to me, but I need a good squeegee. Both of the screen protectors are also the same price. BTW, this is my first good screen protector. Before this, on all of my phones, I had one of those 5 for a dollar screen protectors on my phone. So stay tuned for an unboxing and review in a couple of weeks. I will be posting pictures and a video.
Sent from my SAMSUNG-SGH-T989 using xda premium
theandroidrooter88 said:
I decided on the ArmorSuit for a couple of reasons. I was reading some threads earlier that said that the Skinomi Skin's are beeter than ArmorSuit's Skin's. I also read in the same thread that ArmorSuit's Screen Protectors are better than the Skinomi Screen Protectors. I am only getting a screen protector because I already have a case. So the obvious winner is the ArmorSuit. I also read that the ArmorSuit has more items in the kit that it comes in. It has a "lint-free (lol)" cloth and the squeegee in the ArmorSuit is better. The cloth isn't really important to me, but I need a good squeegee. Both of the screen protectors are also the same price. BTW, this is my first good screen protector. Before this, on all of my phones, I had one of those 5 for a dollar screen protectors on my phone. So stay tuned for an unboxing and review in a couple of weeks. I will be posting pictures and a video.
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
Skinomi comes with a rubber squeegie, VERY good, best I have ever seen. and a cloth as well (truly lint free)
idbl_fanatic said:
Skinomi comes with a rubber squeegie, VERY good, best I have ever seen. and a cloth as well (truly lint free)
Click to expand...
Click to collapse
Oh really? Thanks for telling me that! I read that it didn't come with one. I an still probably going to still get the ArmorSuit because it still has a better screen protector. If for whatever reason I don't like it, I will get the Skinomi. I am not ordering a screen protector for a couple of days so I will still have time to compare. I really won't decide until the last minute. Anything else you want to tell me about the Skinomi? Also, was it hard to install it? How does it look? Does it cover dead pixels?
Sent from my SAMSUNG-SGH-T989 using xda premium
theandroidrooter88 said:
Oh really? Thanks for telling me that! I read that it didn't come with one. I an still probably going to still get the ArmorSuit because it still has a better screen protector. If for whatever reason I don't like it, I will get the Skinomi. I am not ordering a screen protector for a couple of days so I will still have time to compare. I really won't decide until the last minute. Anything else you want to tell me about the Skinomi? Also, was it hard to install it? How does it look? Does it cover dead pixels?
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
Wasn't hard to install at all, comes with a spray that you spray it with, no bubbles at all, I can't even tell it is on there, except where my case pulled it up on a side a little. good thing with them, is that there is a lifetime replacement on them.
AS for the dead pixels, I am not sure anything will cover that, I am not sure what you are expecting there.
idbl_fanatic said:
Wasn't hard to install at all, comes with a spray that you spray it with, no bubbles at all, I can't even tell it is on there, except where my case pulled it up on a side a little. good thing with them, is that there is a lifetime replacement on them.
AS for the dead pixels, I am not sure anything will cover that, I am not sure what you are expecting there.
Click to expand...
Click to collapse
OK, thanks. I think you changed my mind because I don't have any input on the ArmorSuit and by what you are saying, the Skinomi is a great screen protector.
Sent from my SAMSUNG-SGH-T989 using xda premium
how does the lifetime replacements work with armor suit? like what do i have to do to get another one. I have one on my S2 and i love it but i recently got a smudge of gorilla glue on it and i just ordered some more screen protectors off of amazon, the "RND Power Solutions Ultra Crystal Clear Screen Protector" to be exact. they have good reviews so i just went with them and plus you get 3 of them
850Mda said:
how does the lifetime replacements work with armor suit? like what do i have to do to get another one. I have one on my S2 and i love it but i recently got a smudge of gorilla glue on it and i just ordered some more screen protectors off of amazon, the "RND Power Solutions Ultra Crystal Clear Screen Protector" to be exact. they have good reviews so i just went with them and plus you get 3 of them
Click to expand...
Click to collapse
I believe warranty is same as zagg. Contact them, tell them it failed. They send new one, and ask you send the old one back.
i still have the tmobile brand screen protector. but i will use next the armor one. so i look forward to this review
imsuchahotdog said:
i still have the tmobile brand screen protector. but i will use next the armor one. so i look forward to this review
Click to expand...
Click to collapse
So what should i get? ArmorSuit or Skinomi? At first I was leaning towards ArmorSuit but than I didn't get any feedback on that but i got a lot of good feedback on the Skinomi.
Sent from my SGH-T989 using xda premium
theandroidrooter88 said:
So what should i get? ArmorSuit or Skinomi? At first I was leaning towards ArmorSuit but than I didn't get any feedback on that but i got a lot of good feedback on the Skinomi.
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
I have used Skinomi with most of my phones, and if I have any issues, I just email them with my order number, and I usually have a replacement within the week
idbl_fanatic said:
I have used Skinomi with most of my phones, and if I have any issues, I just email them with my order number, and I usually have a replacement within the week
Click to expand...
Click to collapse
Final Decision: Skinomi because I only got feedback from people with that screen protector. If I don't like of, I will change to ArmorSuit.
Sent from my SGH-T989 using xda premium
OP Updated!
Sent from my SGH-T989 using xda premium
theandroidrooter88 said:
OP Updated!
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
lol they are both the same ive had ArmorSuit and it is an no go with a case it comes off on the side also ArmorSuit didnt fit 100 i think it had some slag coming off the side might had been the reason for it not staying other then that i liked that it was removeale but really unless the screen protector can give more then just protect its not needed on s2 or s3 well unless you drop or just stab with a blade
i would want if it can give us no oil or other thing that make us have to wipe or clean the screen after talking
Dexster said:
lol they are both the same ive had ArmorSuit and it is an no go with a case it comes off on the side also ArmorSuit didnt fit 100 i think it had some slag coming off the side might had been the reason for it not staying other then that i liked that it was removeale but really unless the screen protector can give more then just protect its not needed on s2 or s3 well unless you drop or just stab with a blade
i would want if it can give us no oil or other thing that make us have to wipe or clean the screen after talking
Click to expand...
Click to collapse
I'm mostly getting it so I can hide the scratches on my screen.
Sent from my SGH-T989 using xda premium
OP updated!
Can someone please tell me what the best screen protector is for the One?
Cheers
You can't go wrong with ZAGG, Skinomi or Ghost Armor. Ghost Armor is my favorite but I paid priority mail and it got lost in the mail. It shipped on 4/9 and USPS has the screen protector on transit. I had to beg to get the shipping refunded and it took several days of voice messages and emails for anyone to get back to me. I asked them to send me a new one but fed ex it for free and they wouldn't. I was disappointed with that decision. I think each company has a Facebook page and you can see what people say about the screen protectors.
any had any experience with the mediadevil ones?
Anyone have experience with the AT&T ones for $10?
SPG's are the best I've seen reviewed and used. There is one model for the One right now, but they usually have 2 or 3 different ones for each phone (for different functions).
I used the Official HTC protectors and i found that the edges never stay stuck down properly and bubble up. Ive now changed it to a FoneM8 one and it fits perfectly, no bubbles and the surface is smooth.
I went with some cheaper ones because their reviews on other phones have been really good as far as I can tell. Their the Fosmon Crystal Clear, I'll post when I get my phone and give it a try but they were $2 shipped for 3 protectors and arrived in 4 days.
Edit : Oh and it doesn't come with a squeegee but a credit card or whatever will work. Definitely recommend the hinge method!
http://www.amazon.com/Fosmon-Crysta...=1366477959&sr=8-2&keywords=fosmon+htc+one+m7
Here are some reviews for the same screen protector for other phones,
http://www.amazon.com/Fosmon-Crysta...qid=1366478143&sr=1-3&keywords=fosmon+samsung
http://www.amazon.com/Fosmon-Crysta...id=1366478003&sr=1-3&keywords=fosmon+iphone+5
D3luSi0n4L said:
I went with some cheaper ones because their reviews on other phones have been really good as far as I can tell. Their the Fosmon Crystal Clear, I'll post when I get my phone and give it a try but they were $2 shipped for 3 protectors and arrived in 4 days.
Edit : Oh and it doesn't come with a squeegee but a credit card or whatever will work. Definitely recommend the hinge method!
http://www.amazon.com/Fosmon-Crysta...=1366477959&sr=8-2&keywords=fosmon+htc+one+m7
Here are some reviews for the same screen protector for other phones,
http://www.amazon.com/Fosmon-Crysta...qid=1366478143&sr=1-3&keywords=fosmon+samsung
http://www.amazon.com/Fosmon-Crysta...id=1366478003&sr=1-3&keywords=fosmon+iphone+5
Click to expand...
Click to collapse
I got the fosman too. They haven't come yet. I usually get spg, and I still will but bought the fosman because of the price and then I googled them and they seemed good.
I'm against wet installs, zagg, skinomi, best skin ever.... I won't do them. I don't trust the liquid application. Plus they always seem to have a grippy feel, I like the feeling of glass, like the spg ultra crystal.
Sent from my Nexus 4 using Tapatalk 2
Always been buying spigen cases
Sent from my Nexus 7 using xda premium
Long813 said:
SPG's are the best I've seen reviewed and used. There is one model for the One right now, but they usually have 2 or 3 different ones for each phone (for different functions).
Click to expand...
Click to collapse
Is ti SGP or Steinheil?
Tanquen said:
Is ti SGP or Steinheil?
Click to expand...
Click to collapse
I believe spg and steinheil are the same company.
Sent from my Nexus 4 using Tapatalk 2
I highly suggest anything that is not a ZAGG Invisible Shield.
The texture is incredibly rough and compared to a more standard screen protector, harder to use on the phone. Plus, depending on what kind of case you use, it's prone to peeling on the edges.
giper54 said:
You can't go wrong with ZAGG, Skinomi or Ghost Armor. Ghost Armor is my favorite but I paid priority mail and it got lost in the mail. It shipped on 4/9 and USPS has the screen protector on transit. I had to beg to get the shipping refunded and it took several days of voice messages and emails for anyone to get back to me. I asked them to send me a new one but fed ex it for free and they wouldn't. I was disappointed with that decision. I think each company has a Facebook page and you can see what people say about the screen protectors.
Click to expand...
Click to collapse
I stopped trusting facebook pages for companies. Several times I posted negative information on comments on different company's pages, mostly because it was near impossible to get a hold of anyone, and my post was quickly deleted without any notice to me. I say this should be illegal as it takes away my freedom of speech on the page, but whatever... Not a fight I wanna take
Sent from my Evo 3D CDMA using xda app-developers app
SirSigma said:
I highly suggest anything that is not a ZAGG Invisible Shield.
The texture is incredibly rough and compared to a more standard screen protector, harder to use on the phone. Plus, depending on what kind of case you use, it's prone to peeling on the edges.
Click to expand...
Click to collapse
I don't know why people like zagg. There are so many better options out there. Zagg feels "rubbery" and I know the orange peel look has been a bit better but it still looks like crap to me. Something like spg ultra clear is what I call the perfect screen protector for any device. It's almost invisible and feels pretty much like a naked screen. Not to mention zagg is a wet install.
Sent from my Paranoid Nexus 7 using Tapatalk 2
Do you guys think HTC one x screen protector are cross compatible with HTC one?
Sent from my HTC One using xda app-developers app
jags_the1 said:
Do you guys think HTC one x screen protector are cross compatible with HTC one?
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
I don't think so...the H1 is taller and the screen is narrower.
Sent from my Paranoid Nexus 7 using Tapatalk 2
Waiting for the tempered glass screen protector from Spigen
YoungAceAtlanta said:
Waiting for the tempered glass screen protector from Spigen
Click to expand...
Click to collapse
Are they doing the glas t for the H1? I thought I read they stopped making it. That would be awesome if they do! Love that glas t!
Sent from my Paranoid Nexus 7 using Tapatalk 2
Go with Steinheil....by far the best I have used. The second best would be ghost armor.
Sent from my HTCONE using xda premium
dirtyhamster73 said:
Are they doing the glas t for the H1? I thought I read they stopped making it. That would be awesome if they do! Love that glas t!
Sent from my Paranoid Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
Yeah, they manufactured it previously, but there were some problems with capacitive button response. I have my doubts that they will make a version that works. Seems like the button sensitivity on the One is just a little on the weak side.
Old thread: http://forum.xda-developers.com/showthread.php?t=2211418
I've seen a few posts for the spigen glas.t, but not much for the glas.tr for this phone, so I thought I would share my experience. I took the plunge and bought one recently. Let me preface this by saying that I hate, and I mean hate screen protectors, but I just got it installed and I must say this thing is awesome. I can't hardly tell the thing is on there, clarity is great, and it feels just like the screen. I'm using it with a poetic atmosphere case and they both work together perfectly (I actually hate cases too but this phone I am scared of :silly. The lip of the case comes almost right to the edge of the glass, and the rounded edges make it seem almost part of the design. I will say my first one had issues, as the edges didn't stick to the phone so it had bubbles around it, I took it off almost immediately. Amazon overnighted me a second one and that's the one I have on right now, it has no issues at all. So if anybody is interested I would totally recommend this thing, coming from a screen protector hater
How bout some pics bro?
Sent from my HTC One using Tapatalk 4 Beta
Pure+ said:
How bout some pics bro?
Sent from my HTC One using Tapatalk 4 Beta
Click to expand...
Click to collapse
Ask and you shall receive
A few more
Thanks for the pics. In #2, 5 & 7 It looks like the glass is not flush with the bottom or sides and has a gap. Wont you have issues with dust in those areas
sbihue said:
Thanks for the pics. In #2, 5 & 7 It looks like the glass is not flush with the bottom or sides and has a gap. Wont you have issues with dust in those areas
Click to expand...
Click to collapse
The glass lies flat with the screen, but the round part of the rounded edges don't go all the way to the bottom, it created an edge part of the way down, so this edge catches a little dust.
Thanks for the guide... I want to use glass tr. But in my country no many seller sell glass tr..
resusonline said:
Thanks for the guide... I want to use glass tr. But in my country no many seller sell glass tr..
Click to expand...
Click to collapse
Which country if you don't mind me asking?
resusonline said:
Thanks for the guide... I want to use glass tr. But in my country no many seller sell glass tr..
Click to expand...
Click to collapse
ebay my friend.. i want a glass protector also.. but sgp glastr is too expensive.. 35$ plus shipping.. there is other brand 14$-25$ but i dont know the quality.. tsk.. i think il wait for some reviews..
I got my glas.tr installed few hours ago. I failed couple of times, but now I took a shower first and put it on at the bathroom, less dust.
OP, did they send you the second one free or did you have to pay?
Sent from my HTC One using xda app-developers app
Lekerstein said:
OP, did they send you the second one free or did you have to pay?
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
Given their policy on there site most likely for free. You can see the policy whenever you visit the page for either the t or tr
Sent from my HTC One using Tapatalk 4 Beta
Lekerstein said:
OP, did they send you the second one free or did you have to pay?
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
I bought it through Amazon, contacted their customer service, and explained the issue with the first one. She said since the item listing said no exchanges, she told me to buy a new one with overnight shipping, she then removed the shipping charges, and gave me a label to return the other one. So essentially a free exchange, but in a roundabout way.
I've been wondering how these were, thanks!
Ive never used a glass screen protector before. What are the main benefits over something like a Zagg? Have you noticed any reduction in sensitivity for the screen or capacitive buttons?
Snakemanc6 said:
Ive never used a glass screen protector before. What are the main benefits over something like a Zagg? Have you noticed any reduction in sensitivity for the screen or capacitive buttons?
Click to expand...
Click to collapse
you cant really compare this to Zagg. this screen protector feels exactly the same as no screen protector.
how is the responsivness of the screen with the OP tr. glass ?
(I see on the other topic with Mime tr. glass, the responsivness was a bit affected, so I'm curiuous about this one)
dinoc said:
how is the responsivness of the screen with the OP tr. glass ?
(I see on the other topic with Mime tr. glass, the responsivness was a bit affected, so I'm curiuous about this one)
Click to expand...
Click to collapse
I haven't noticed a difference in sensitivity, sometimes it's a little weird to hit the rounded edge when you go for the home/back button. But everything works just as it did without the glass on.
ryan09266 said:
A few more
Click to expand...
Click to collapse
you got the same phone color, the same case de same color and the same HTC ONE X and im thinking on buying this glass XD
Will this work with UAG Case?
Hi all,
I bought this screen protector: XunEda Asus Zenfone 6 ZS630KL 6.4", link: https://www.amazon.de/XunEda-Panzer...4"+Panzerglas&qid=1560808402&s=gateway&sr=8-3
Just wanted you to know not to try this one. It is too small (missing some mm at the bottom) and has a black border that covers a few pixels.
Never take a screen protector with black bars.
NEVER.
AhhdafunK01 said:
Never take a screen protector with black bars.
NEVER.
Click to expand...
Click to collapse
Didn't took notice of this before. I haven't even considered that this is existing...
stevejoshua said:
Just came across that gadgetshieldz taking orders for Asus Zenfone 6Z. Here is the link
Click to expand...
Click to collapse
Does this screen protector offers any camera protection??
NormanBakes said:
Does this screen protector offers any camera protection??
Click to expand...
Click to collapse
Yes. The one ordered from gadgetshieldz with full cover protection does cover your camera lense
If you don't mind leaving a very small part of your bezels exposed. Get a good quality borderless tempered glass meant for Huawei Nova 5. It will cover the display but leave the side and bottom bezels slightly exposed. With a case, maybe 1/2mm on the side and 1-2 mm at the bottom.
I bought this one :
https://www.amazon.fr/gp/product/B07RZR3WXJ/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
It fits very well, screen full covered and no bubbles.
Theres any good quality tempered glass protector for this phone?
I'm looking everywhere and i can't find it. So far i used Orzly and Nillkin on my phones but i can't find none for this one. All i find is non-brand name / chinese cheaping looking glass. I want something really good to protect the screen in a eventual fall. I already ordered a flip-case but i want extra-protection.
I saw those gadgetshieldz but it seems it's not tempered glass. Do they protect in case of a fall?
DoubleM101 said:
Theres any good quality tempered glass protector for this phone?
I'm looking everywhere and i can't find it. So far i used Orzly and Nillkin on my phones but i can't find none for this one. All i find is non-brand name / chinese cheaping looking glass. I want something really good to protect the screen in a eventual fall. I already ordered a flip-case but i want extra-protection.
I saw those gadgetshieldz but it seems it's not tempered glass. Do they protect in case of a fall?
Click to expand...
Click to collapse
I asked Nillkin of they're planning to make it for this phone. They said no ETA. I found couple on Amazon with/out black trim. Might order couple and test it out.
Sent from my SM-G970U1 using Tapatalk
x1tymez said:
I asked Nillkin of they're planning to make it for this phone. They said no ETA. I found couple on Amazon with/out black trim. Might order couple and test it out.
Sent from my SM-G970U1 using Tapatalk
Click to expand...
Click to collapse
In the end i bought this one:
https://www.ebay.co.uk/itm/Asus-Zen...654623?hash=item547136921f:g:0hEAAOSwqzJdCTiX
Theres a clear version also.
As soon as i got it i will leave my feedback about it.
DoubleM101 said:
Theres any good quality tempered glass protector for this phone?
I'm looking everywhere and i can't find it. So far i used Orzly and Nillkin on my phones but i can't find none for this one.
Click to expand...
Click to collapse
Get nillkin for nova 5. It does not cover the entire screen but just enough for the sides and slightly more for the top and bottom. With a case..the exposed surface is less then 2mm.
x1tymez said:
I asked Nillkin of they're planning to make it for this phone. They said no ETA. I found couple on Amazon with/out black trim. Might order couple and test it out.
Click to expand...
Click to collapse
Those with black borders will cover part of the led light.
DoubleM101 said:
In the end i bought this one:
https://www.ebay.co.uk/itm/Asus-Zen...654623?hash=item547136921f:g:0hEAAOSwqzJdCTiX
Theres a clear version also.
As soon as i got it i will leave my feedback about it.
Click to expand...
Click to collapse
Looks interesting..please do share with us your experience.
I've tried so many from amazon and all of them have been completely crap - Amazon must hate me as I've returned like 6 different brands and left bad reviews lol.
hexxor93 said:
I've tried so many from amazon and all of them have been completely crap - Amazon must hate me as I've returned like 6 different brands and left bad reviews lol.
Click to expand...
Click to collapse
Which kinds did you try? Black trim or clear glass.
Sent from my SM-G970U1 using Tapatalk
All clear ones without the black boarder
eRRoRist said:
Looks interesting..please do share with us your experience.
Click to expand...
Click to collapse
I already got it but unfortunately still no phone to test it.
However i'm surprised how flexible it is. Every tempered glass i used in the past was hard, inflexible. This one isn't one of those platics films, it feels more hard but still flexible. I'm not sure what kind of material is this.
hexxor93 said:
All clear ones without the black boarder
Click to expand...
Click to collapse
Nothing is decent on Amazon. I've tested clear/black borderline. They all have adhesive problem.
Sent from my ASUS_I01WDX using Tapatalk
x1tymez said:
Nothing is decent on Amazon. I've tested clear/black borderline. They all have adhesive problem.
Sent from my ASUS_I01WDX using Tapatalk
Click to expand...
Click to collapse
Saying that I actually bought one which actually works. Have a look - it's way better than all the others I've tried and returned haha
hexxor93 said:
Saying that I actually bought one which actually works. Have a look - it's way better than all the others I've tried and returned haha
Click to expand...
Click to collapse
No adhesive problem? All the one I tired is on front page after searching. 4 brands all failed. Hopefully Amazon don't email me lol. I'll tried that next. Thanks.
Sent from my ASUS_I01WDX using Tapatalk
x1tymez said:
No adhesive problem? All the one I tired is on front page after searching. 4 brands all failed. Hopefully Amazon don't email me lol. I'll tried that next. Thanks.
Sent from my ASUS_I01WDX using Tapatalk
Click to expand...
Click to collapse
So far no, even got some dust stuck underneat when I applied it and it didn't seem to care (stuck on the phone very nicely anyway lol) - had it for a week now
hexxor93 said:
So far no, even got some dust stuck underneat when I applied it and it didn't seem to care (stuck on the phone very nicely anyway lol) - had it for a week now
Click to expand...
Click to collapse
I received it today. It's not full adhesive on corner, but they use liquid glue to fill in. If you use a case too tight it will push out the filling. Failed in my book.
Sent from my ASUS_I01WDX using Tapatalk