Develop Bugs

[Q] Bricked

i have htc desire i updated it to latest update downloaded directly from Wifi but i disabled the signature toogle and there u go now my mobile is restarting again and again :
This is the information on bootloader:
Hboot : 0.93
Radio 0-5.22.05.27
I downloaded pre rooted foryo put it on sd and renamed it update.zip but wen i restore i get error of signature failure
What should i do now ??

msamiullah said:
i have htc desire i updated it to latest update downloaded directly from Wifi but i disabled the signature toogle and there u go now my mobile is restarting again and again :
This is the information on bootloader:
Hboot : 0.93
Radio 0-5.22.05.27
I downloaded pre rooted foryo put it on sd and renamed it update.zip but wen i restore i get error of signature failure
What should i do now ??
Click to expand...
Click to collapse
Have you tried a full wipe after the update?

yup i wiped the data but still !! its restarting on boot process !!

cjm1979 said:
Have you tried a full wipe after the update?
Click to expand...
Click to collapse
well i dnt understand wat u mean by full wipe i had selected the option of Clear Storage in bootloader !!! is it the full wipe ?

msamiullah said:
yup i wiped the data but still !! its restarting on boot process !!
Click to expand...
Click to collapse
Are you able to run an Ruu official rom while connected to a pc?

cjm1979 said:
Are you able to run an Ruu official rom while connected to a pc?
Click to expand...
Click to collapse
well i ran the exe but it does not recognize my mobile !!! becuz i thnk its not recognizing becuz m on bootloader screen !!

msamiullah said:
i have htc desire i updated it to latest update downloaded directly from Wifi but i disabled the signature toogle and there u go now my mobile is restarting again and again :
This is the information on bootloader:
Hboot : 0.93
Radio 0-5.22.05.27
I downloaded pre rooted foryo put it on sd and renamed it update.zip but wen i restore i get error of signature failure
What should i do now ??
Click to expand...
Click to collapse
I would try redownloading the ROM (from PC), place on SD card, go into recovery, full wipe from recovery, flash zip file from recovery.

Rumball said:
I would try redownloading the ROM (from PC), place on SD card, go into recovery, full wipe from recovery, flash zip file from recovery.
Click to expand...
Click to collapse
but recovery is giving me the error of signature failure.

Did you try and apply an update to a rooted phone????

Well, if you're on bootloader screen it usually doesnt recognize your phone.
Last time I flashed a RUU i used fastboot mode. Start your phone with the "back key" held. Then start the RUU.
If you get something like a Model ID Error then, you will have to create a Goldcard to apply the RUU.
CAUTION: Before you flash any RUU, check if it's compatible with your SLCD or AMOLED Device. SLCD Devices are incompatible with certain RUUs, flashing a wrong one results in a semi-brick (display not working, but ROM functioning).

You must be aware of having the correct RUU.then try to enter fastboot, when it is loaded, plug in your cable, you must see that it turns to 'hboot usb plug'. If it does so, you can flash the original RUU, if it is the right one

Scray said:
Well, if you're on bootloader screen it usually doesnt recognize your phone.
Last time I flashed a RUU i used fastboot mode. Start your phone with the "back key" held. Then start the RUU.
If you get something like a Model ID Error then, you will have to create a Goldcard to apply the RUU.
CAUTION: Before you flash any RUU, check if it's compatible with your SLCD or AMOLED Device. SLCD Devices are incompatible with certain RUUs, flashing a wrong one results in a semi-brick (display not working, but ROM functioning).
Click to expand...
Click to collapse
I tried to apply ruu it went all well but after some process like 30 % it gave me the error of wronge bootloader version

Bizzy_B said:
You must be aware of having the correct RUU.then try to enter fastboot, when it is loaded, plug in your cable, you must see that it turns to 'hboot usb plug'. If it does so, you can flash the original RUU, if it is the right one
Click to expand...
Click to collapse
can u give me the link of latest ruu for htc desire

hay guyz got it working !!! by latest version of RUU for Desire !! thnx a lot !!
GOT latest version from here !!
http://forum.xda-developers.com/showthread.php?t=869048&page=2
THNX Again !!

msamiullah said:
I tried to apply ruu it went all well but after some process like 30 % it gave me the error of wronge bootloader version
Click to expand...
Click to collapse
Hmm...Somehow the newest post was hidden from me..Glad you solved it.

Glad i could help you, i hate bricked desires, had a similar problem once...

[Q] JB OTA fails with the red rectangular

I have an unlocked HTC One X, running Stock Rom and CMW recovery. CID 621. (never installed any custom roms, only CMW recovery and unlocking the phone)
I haven't updated my phone in a while since OTA failed due to the recovery. Last night I reverted back to the stock recovery and updated, successfully, OTA version 2.18.751.7.
After updating my One X informs me there's a JB OTA update, 3.14.751.20 but when I try to run it, it reboots, shows the green progress bar for about 30 seconds then shows the red rectangular of failure (rebooting starts up the device normally).
I tried reflashing the stock recovery, tried the recovery from the latest RUU for my CID (RUU_ENDEAVOR_U_ICS_40_S_Chunghwa_2.17.751.2_Radio_2.1204.136.21_release_275588_signed) but the OTA update keeps failing.
I also tried disabling SuperSU and used Voodoo Root Keeper to disable root, still the same red rectangular. Tried using the nandroid backup and running through the updates again, but same issue (2.18.751.7 installs correctly, but 3.14.751.20 fails).
Any help would be appreciated!
Thanks,
Maya

mayashoval said:
I have an unlocked HTC One X, running Stock Rom and CMW recovery. CID 621. (never installed any custom roms, only CMW recovery and unlocking the phone)
I haven't updated my phone in a while since OTA failed due to the recovery. Last night I reverted back to the stock recovery and updated, successfully, OTA version 2.18.751.7.
After updating my One X informs me there's a JB OTA update, 3.14.751.20 but when I try to run it, it reboots, shows the green progress bar for about 30 seconds then shows the red rectangular of failure (rebooting starts up the device normally).
I tried reflashing the stock recovery, tried the recovery from the latest RUU for my CID (RUU_ENDEAVOR_U_ICS_40_S_Chunghwa_2.17.751.2_Radio_2.1204.136.21_release_275588_signed) but the OTA update keeps failing.
I also tried disabling SuperSU and used Voodoo Root Keeper to disable root, still the same red rectangular. Tried using the nandroid backup and running through the updates again, but same issue (2.18.751.7 installs correctly, but 3.14.751.20 fails).
Any help would be appreciated!
Thanks,
Maya
Click to expand...
Click to collapse
Have you tried relocking your bootloader? 'fastboot oem lock'

Also, maybe try flashing the stock kernel as well?

Did you remove anything?
You might try running an RUU if you can one one new enough, or restoring a backup (there are threads here for both backups and RUU, but look on htcruu.com, the device is endeavoru)

ArmedandDangerous said:
Also, maybe try flashing the stock kernel as well?
Click to expand...
Click to collapse
I'm hesitant about flashing a kernel, as I did not change the original stock one, and it feels too risky.

BenPope said:
Did you remove anything?
You might try running an RUU if you can one one new enough, or restoring a backup (there are threads here for both backups and RUU, but look on htcruu.com, the device is endeavoru)
Click to expand...
Click to collapse
I thought about that, but the most recent RUU for my CID is older than what getvar is telling me (INFOversion-main: 2.18.751.7. latest RUU I found is: RUU_ENDEAVOR_U_ICS_40_S_Chunghwa_2.17.751.2_Radio_2.1204.136.21_release_275588_signed).
As to relock, I went through quite a few similar threads and in all relocking did not make any difference. Also, if that was the case, I don't think the first OTA update would have gone through.

mayashoval said:
I thought about that, but the most recent RUU for my CID is older than what getvar is telling me (INFOversion-main: 2.18.751.7. latest RUU I found is: RUU_ENDEAVOR_U_ICS_40_S_Chunghwa_2.17.751.2_Radio_2.1204.136.21_release_275588_signed).
As to relock, I went through quite a few similar threads and in all relocking did not make any difference. Also, if that was the case, I don't think the first OTA update would have gone through.
Click to expand...
Click to collapse
I think the update to hboot requires it to be locked, your previous update was most likely ok with the hboot it was on.

mayashoval said:
I thought about that
Click to expand...
Click to collapse
Then look for a backup of your ROM version in the backup thread.

BenPope said:
Then look for a backup of your ROM version in the backup thread.
Click to expand...
Click to collapse
Sorry to be a noob but what do you mean? I thought I couldn't use a backup older than the one listed under "main version". Or am I confusing things?
Edit:
Can I install the most recent RUU?
INFOversion-main: 2.18.751.7.
latest RUU is: RUU_ENDEAVOR_U_ICS_40_S_Chunghwa_2.17.751.2_Radio_ 2.1204.136.21_release_275588_signed.

Update: locking the phone did not help
I locked the phone, but the update still fails at the same location. The green bar expands for about 20 seconds, covering about a quarter of the bar, and the the red triangle appears.

You could always attempt to update the firmware/hboot manually download it here for your cid http://forum.xda-developers.com/showthread.php?t=1957376
Or there is a tool here http://forum.xda-developers.com/showthread.php?t=1924003

sorry for being a noob
gffmac said:
You could always attempt to update the firmware/hboot manually download it here for your cid http://forum.xda-developers.com/showthread.php?t=1957376
Or there is a tool here http://forum.xda-developers.com/showthread.php?t=1924003
Click to expand...
Click to collapse
the tool looks easy enough, but they ask to include the custom JB rom of my choice. I want the Stock update, so what do I do?
The manual update list points to a broken link. I did find it somewhere else. How do I manually update? are these the commands?
fastboot oem rebootRUU
fastboot flash zip firmware.zip
do I need to unlock my phone again? can I use the same Unlock_code.bin I got from HTC last time (saved it) or do I have to go through the process again?
I'm asking all these questions because I don't want to end up with a bricked phone.

mayashoval said:
the tool looks easy enough, but they ask to include the custom JB rom of my choice. I want the Stock update, so what do I do?
The manual update list points to a broken link. I did find it somewhere else. How do I manually update? are these the commands?
fastboot oem rebootRUU
fastboot flash zip firmware.zip
do I need to unlock my phone again? can I use the same Unlock_code.bin I got from HTC last time (saved it) or do I have to go through the process again?
I'm asking all these questions because I don't want to end up with a bricked phone.
Click to expand...
Click to collapse
There are a couple of really good stock looking ROMs on there with enhanced performance. There's one mentioned in my sig, it may also be the easiest route out of your issue using the tool posted above

exocetdj said:
There are a couple of really good stock looking ROMs on there with enhanced performance. There's one mentioned in my sig, it may also be the easiest route out of your issue using the tool posted above
Click to expand...
Click to collapse
Yes I am running to issues... turns out that manually flashing the firmware.zip just got my phone into a bootloop since it turns out you must install a custom rom after it. I did not want to install a custom rom just to get the OTA update to install. now my phone keeps rebooting and I'm waiting for ADHD to download (takes FOREVER! for some reason).
This really sucks. I wanted to stay with stock, and it looks like I can't even go back anymore, can't even restore with a RUU.

mayashoval said:
Yes I am running to issues... turns out that manually flashing the firmware.zip just got my phone into a bootloop since it turns out you must install a custom rom after it. I did not want to install a custom rom just to get the OTA update to install. now my phone keeps rebooting and I'm waiting for ADHD to download (takes FOREVER! for some reason).
This really sucks. I wanted to stay with stock, and it looks like I can't even go back anymore, can't even restore with a RUU.
Click to expand...
Click to collapse
There should be a RUU out for your region soonish but Until then, a stock style custom rom is a brilliant option beleive me

exocetdj said:
There should be a RUU out for your region soonish but Until then, a stock style custom rom is a brilliant option beleive me
Click to expand...
Click to collapse
don't really have a choice now...
downloading maXimus as per your recommendation (and because ADHD will take another 9 hours

You can restore an older backup, it's just like installing a custom ROM.
You might also be able to install a 2.17 RUU on 2.18, I'm not sure the hboot was updated. It's also possible to dissect an RUU and install the bits manually.
You have a few options.

i am having the same issue, I have the stock rom (never flashed) on a rooted phone. So i relocked the bootloader and flashed stock recovery, but im getting the red triangle when installing the update.
OP, did you already find a solution?

plaktoets said:
i am having the same issue, I have the stock rom (never flashed) on a rooted phone. So i relocked the bootloader and flashed stock recovery, but im getting the red triangle when installing the update.
OP, did you already find a solution?
Click to expand...
Click to collapse
Sorry did not find a solution. Ended up installing a custom rom, even though I wanted to keep using the stock one

plaktoets said:
i am having the same issue, I have the stock rom (never flashed) on a rooted phone. So i relocked the bootloader and flashed stock recovery, but im getting the red triangle when installing the update.
OP, did you already find a solution?
Click to expand...
Click to collapse
I hope you did this the other way around......first flash the recovery and the relock the bootloader.....
But if you are on stock rom, kernel and recovery you do not have to relock the bootloader, it updates fine with a unlocked one.

[Q] Problems with RUU

hi
Its difficult to explain but i try.
In phone was installed cyagenmod 10.1. I decided to install stock rom. First i locked bootlader and then try to install RUU_ENDEAVOR_U_JB_45_S_HTC_Europe_3.14.401.31_R_Radio_5.1204.162.29_release_302015_signed
But now i get error when i try install that RUU update. Error 140, bootloader version error. Phone is now totaly empty. Even no CWM recovery.
What to do ? i have no ideas anymore. All RUU updates are with older bootloader
version-main: 3.20.401.3

ufo56 said:
hi
Its difficult to explain but i try.
In phone was installed cyagenmod 10.1. I decided to install stock rom. First i locked bootlader and then try to install RUU_ENDEAVOR_U_JB_45_S_HTC_Europe_3.14.401.31_R_Radio_5.1204.162.29_release_302015_signed
But now i get error when i try install that RUU update. Error 140, bootloader version error. Phone is now totaly empty. Even no CWM recovery.
What to do ? i have no ideas anymore. All RUU updates are with older bootloader
version-main: 3.20.401.3
Click to expand...
Click to collapse
Instal this stock rom and stock recovery and do software update from the system software update

Thant said:
Instal this stock rom and stock recovery and do software update from the system software update
Click to expand...
Click to collapse
Ok and how install this zip? adb push or sideload or what ?
EDIT: now i have another problem also. it says that phone battery is to low. I cant even turn off phone. If i remove usb then shuts down when choose that. And if usb get plugged in then starts phone.
EDIT2: Can not find [android-info.txt] in zipped image! With your rom. I used one x toolkit (flash factory RUU ZIP)
EDIT3: I have tried everything but version stays 3.20.401.3
EDIT4: Finally successsss!! i downloaded nandroid backup from here http://forum.xda-developers.com/showthread.php?t=1975140 and (flash first the recovery.img (from nand.zip) then restore nandroid backup))

[Q] Need Help restoring to Stock

I have an Unlocked HTC One M8
it is the malaysian version so reads "HTC One_M8x" occasionally
CID is HTC_621
i am on software # 3.28.709.6
i am having difficulties restoring to stock, all RUU's from htc or any third party fail
due to either incorrect model id, or signing failure. As well as using any OTA's.
I went from stock in this order.
>Unlocked Bootloader from htc-dev
>Installed TWRP
>Installed SuperSU
> Backed up my rom
-did this under the assumption root is okay with OTA's
> Then i attempted to S-Off, turns out the malaysian version is not supported by
Sunshine S-off yet.
>Following all of this i found out Lollipop was released for my phone.
>I proceeded to revert my phone to the backup in TWRP
>Relocked my bootloader.
>Then i installed a stock recovery, i am not at a point where i recieve and download the OTA but am
uunable to install it, the process begins and then red triangles.
I have tried manually doing the OTA's via ADB
i have tried both a 4.4.4 kkitkat RUU for unlocked HTC M8, and the one for 5.0 lollipop HTC M8
neither pass and say model id is incorrect
If anyone has had these issues and knows a way to fix it, or has the same phone as me
and has links or files i would greatly appreciate it, till then i guess im stuck with 4.4.4.
any questions just ask! And thankyou ahead of time!

Why lock bootloader? More importantly, why lock bootloader before you even flashed back the recovery?
There are no RUU's(As far as I know) for Asian Models, only for WWE International(Not widely/freely available though) and definitely only for US Variants(Sprint, T-Mobile, AT&T, Developer Edition & Verizon). Of course the RUU's won't work on your device, you'd need to change the MID of the device or SuperCID(Need S-OFF for both).
Did your stock recovery flash back? Boot into recovery and make sure you have stock recovery flashed back. No need to lock bootloader, only time you need to do that is when you manually flash firmware or for the RUU(Both instances ONLY IF you are S-ON).
If you don't have stock recovery, unlock again and flash stock recovery.

BerndM14 said:
Why lock bootloader? More importantly, why lock bootloader before you even flashed back the recovery?
There are no RUU's(As far as I know) for Asian Models, only for WWE International(Not widely/freely available though) and definitely only for US Variants(Sprint, T-Mobile, AT&T, Developer Edition & Verizon). Of course the RUU's won't work on your device, you'd need to change the MID of the device or SuperCID(Need S-OFF for both).
Did your stock recovery flash back? Boot into recovery and make sure you have stock recovery flashed back. No need to lock bootloader, only time you need to do that is when you manually flash firmware or for the RUU(Both instances ONLY IF you are S-ON).
If you don't have stock recovery, unlock again and flash stock recovery.
Click to expand...
Click to collapse
I believe i do have stock recovery, should i unlock my bootloader again?
"Android system recovery <3e>
KTU84L release-keys"

Bamboostew said:
I believe i do have stock recovery, should i unlock my bootloader again?
"Android system recovery <3e>
KTU84L release-keys"
Click to expand...
Click to collapse
Ok then try the OTA update again, when you get the error press Volume UP and Tap the power button to view the installation log. It'll tell you there what the reason is it won't install.

BerndM14 said:
Ok then try the OTA update again, when you get the error press Volume UP and Tap the power button to view the installation log. It'll tell you there what the reason is it won't install.
Click to expand...
Click to collapse
Finding update package...
opening update package...
verifying update package...
installing update...
L50QCT.01.101.007
Packages expects build fingerprint of htc/htc_asia_tw/htc_m8:
4.4.4/KTU84P/389838,6:user/release-keys: this device has
htc/brightstarus_wwe/htc_m8:4.4.3/KTU84L/365360.3:user/
release-keys.
installation aborted.
Write host_mode:0 done
Does this mean i have the incorrect recovery then?

Bamboostew said:
Finding update package...
opening update package...
verifying update package...
installing update...
L50QCT.01.101.007
Packages expects build fingerprint of htc/htc_asia_tw/htc_m8:
4.4.4/KTU84P/389838,6:user/release-keys: this device has
htc/brightstarus_wwe/htc_m8:4.4.3/KTU84L/365360.3:user/
release-keys.
installation aborted.
Write host_mode:0 done
Does this mean i have the incorrect recovery then?
Click to expand...
Click to collapse
Looks like you have developer edition on there, BrightStar US is Developer Edition. So yes, make sure you have stock HTC TW ROM/Recovery on there and try again.

BerndM14 said:
Looks like you have developer edition on there, BrightStar US is Developer Edition. So yes, make sure you have stock HTC TW ROM/Recovery on there and try again.
Click to expand...
Click to collapse
i have a similar issue here i am s-on at 4.4.3 and i recieve the OTA notification update for 4.4.4 and when i install it stops with the red triangle i believe that it is bright star too .. but i dont know what exactly u r talking about ..what should i do ? Thanks in advance

[Q] Can't install Lollipop update..

Guys, I got the new update, but I can't install it. It gives me red icon during installation. I have installed the stock recovery, but still can't install the update... Can someone help me? My device is rooted and the last time I got an update, I installed stock recovery and installed the update successfully, but now I can't install lollipop update, although I have done the same, can someone help me?

KabbozZ said:
Guys, I got the new update, but I can't install it. It gives me red icon during installation. I have installed the stock recovery, but still can't install the update... Can someone help me? My device is rooted and the last time I got an update, I installed stock recovery and installed the update successfully, but now I can't install lollipop update, although I have done the same, can someone help me?
Click to expand...
Click to collapse
this problem happen to no-root, no unlocked bootloader user too
i don't know why?

Seriously, none got a solution for this problem?

Relock the bootloader, unroot.
Might have to RUU.

FoxyDrew said:
Relock the bootloader, unroot.
Might have to RUU.
Click to expand...
Click to collapse
Don't even how to unroot. Whenever I hit "full unroot", it deletes super SU from my device and asks for a reboot, but when I reboot it, it gets back again..
And I don't even have a nanodroid backup..

FoxyDrew said:
Relock the bootloader, unroot.
Might have to RUU.
Click to expand...
Click to collapse
Yeah i went back to stock unrooted and flashed the stock recovery from your ruu post and then relocked the bootloader but whenever i try to install the update, it doesnt boot into the recovery. It goes straight to the bootloader i think im going to run the ruu zip you provided and then try again.
Sent from my 710C using XDA Free mobile app

Flashing the ruu allowed me to install the update with no problems.
Sent from my 710C using XDA Free mobile app

The_Greatest_Juan said:
Flashing the ruu allowed me to install the update with no problems.
Sent from my 710C using XDA Free mobile app
Click to expand...
Click to collapse
a5ul asia x.xx.707.x has no ruu :crying::crying:

bigbear1308 said:
a5ul asia x.xx.707.x has no ruu :crying::crying:
Click to expand...
Click to collapse
this one should work http://forum.xda-developers.com/desire-816/general/rom-backup-htc-desire-816-single-sim-4g-t2890824

Can someone tell me what to do? What does RUU mean? and how could I know to which region my device belong? like Europe, Arabic etc...
and how could I flash this RUU?
I know how to lock bootloader though..

terrybear2k said:
this one should work http://forum.xda-developers.com/desire-816/general/rom-backup-htc-desire-816-single-sim-4g-t2890824
Click to expand...
Click to collapse
i can't use this
this edited platform.xml so install update abort when around 10-15%

Yeah, same thing is happening to me. My bootloader is unlocked, and the phone is unrooted. I'll download the update, but whenever I hit install, it'll go to the install page, and the green bar starts loading, then it goes to the pre-recovery screen thing with the red triangle with the exclamation point. So I've tried two things. Number one is pressing and holding the volume up and tapping the power button, which gets me to the stock recovery screen. It says that the update was aborted. So I go and restart the device. This seems to have deleted the update, so I have to download it all over again. I do that, then install. Again, I get to the triangle ! screen, so instead, I press and hold both the power button and volume up (which is basically the equivalent of a battery-pull. I get the same result. The update has to download again. What do I do? I was contemplating locking the bootloader and even factory reseting the device. I've kind of been waiting for this update since 5.0 was released period, so I would like some guidance as to what to do next. Oh, and just for helps-sake, I'm using a mac, not a pc. I don't own a pc, only an iMac, and this MacBook Pro.
Anyone know what's going one? Please do help
Thanks!
Noah

KabbozZ said:
Can someone tell me what to do? What does RUU mean? and how could I know to which region my device belong? like Europe, Arabic etc...
and how could I flash this RUU?
I know how to lock bootloader though..
Click to expand...
Click to collapse
After flashing stock recovery and relocking bootloader you need to flash RUU with your CID number.To find out your CID number install CID Getter from Play Store.After you find out your CID number you need to download RUU.And that is hard part of problem... I didn't find my RUU anywhere on web,but you maybe will have better luck.
When you have your RUU just rename file in OP9CIMG.zip and put it in to your sd card.After booting into bootloader phone will search for OP9CIMG.zip file and if CID number is same on phone that file will be flashed.

Aimbot91 said:
After flashing stock recovery and relocking bootloader you need to flash RUU with your CID number.To find out your CID number install CID Getter from Play Store.After you find out your CID number you need to download RUU.And that is hard part of problem... I didn't find my RUU anywhere on web,but you maybe will have better luck.
When you have your RUU just rename file in OP9CIMG.zip and put it in to your sd card.After booting into bootloader phone will search for OP9CIMG.zip file and if CID number is same on phone that file will be flashed.
Click to expand...
Click to collapse
k, my CID is HTC J_15.. How could I find my RUU now?

My VMUSA 816 is still upgrading, but it looks like the solution for some people will be running the last version of ruu???.exe from HTC for your particular version of the 816 before downloading and installing the OTA update for Lollipop. Before running the ruu???.exe file the OTA would just reboot into the bootloader. Note that you should run ruu even if you already have that rom version installed. I already was running 1.50.652.3 but the OTA just wouldn't work. So the ruu just reflashed a clean version of the same rom.
As others have done I unrooted, installed stock recovery and then relocked bootloader before running ruu???.exe and installing OTA update for Lollipop.

The reason flashing a stock recovery would work before is because when doing a smaller update that stayed within kitkat it didn't do an entire system check, when upgrading to lollipop it checks EVERYTHING so the only way it'll install is having a nice fresh stock ROM from an RUU with a locked bootloader and stock recovery.

If s-offed is it necessary to relock bootloader?

KabbozZ said:
k, my CID is HTC J_15.. How could I find my RUU now?
Click to expand...
Click to collapse
Search on web you maybe get lucky...
---------- Post added at 05:57 PM ---------- Previous post was at 05:56 PM ----------
marcukial said:
If s-offed is it necessary to relock bootloader?
Click to expand...
Click to collapse
No its not necessary...

Aimbot91 said:
Search on web you maybe get lucky......
Click to expand...
Click to collapse
Don't even know how to search for it. Still don't know what to type on google, so i could get results.. Could you help me more? I know I have asked much..

KabbozZ said:
Don't even know how to search for it. Still don't know what to type on google, so i could get results.. Could you help me more? I know I have asked much..
Click to expand...
Click to collapse
Did you check the HTC site yet? Look for ROM updates there first. I assume they have country specific sites that will list ROMs for your region. For me in they show all their ROMs for US carriers.