Develop Bugs

[ORIGINAL ROM] PJ46IMG_ENDEAVOR_U_JB_45_S_3.06.999.9_Radio_5.1204 .155.29

DO NOT REQUEST ADDITIONAL SUPPORT!!​
I have found this within a china board. This ROM is unpacked and it seems it's almost original.
ro.build.project=ENDEAVOR_U_JB_45_S:284179
ro.product.version=4.06.999.9
ro.build.languageremove=0
ro.build.sense.version=4.5
ro.build.description=4.06.999.9
CL112670
release-keys
ro.build.fingerprint=release-keys/endeavoru/endeavoru:4.1.1/JRO03C/112670.1:user
Click to expand...
Click to collapse
Hope you enjoy this!
Download: http://www.d-h.st/rKu
I attached the build.prop from the system.img for you to double check.

build.prop
Code:
ro.ril.enable.a53=1
ro.ril.enable.dtm=0
ro.ril.hsdpa.category=14
ro.ril.hsupa.category=6
ro.ril.hsxpa=4
ro.ril.def.agps.mode=2
ro.ril.fast.dormancy.rule=1
ro.ril.radio.svn=1
ro.ril.disable.fd.plmn.prefix=23402,23410,23411,23420,27202
ro.ril.enable.managed.roaming=1
ro.ril.enable.sdr=1
ro.ril.enable.amr.wideband=0
ro.ril.enable.r8fd=0
ro.ril.disable.cpc=0
ro.com.google.clientidbase=android-htc-rev
ro.product.model=HTC One X
ro.config.htc.enableCOTA=1
ro.ril.def.agps.mode=2
ro.da1.enable=true
ro.watch.appid=com.sdgtl.watch.enru_45_jb_s
ro.ril.fd.pre_r8_tout.scr_off=2
ro.ril.fd.pre_r8_tout.scr_on=3
ro.ril.fd.r8_tout.scr_off=0
ro.ril.fd.r8_tout.scr_on=0
persist.ril.silent.reset=1
dev.defaultwallpaper=/system/customize/resource/scene_wallpaper_htc_default.jpg
ro.ril.imc.fdn=0
ro.ril.imc.dtmclass=0
ro.ril.imc.band=900,1800,1900,850
ro.ril.imc.uband="UMTS_BAND_I","UMTS_BAND_II","UMTS_BAND_V","UMTS_BAND_VIII"
ro.ril.imc.darp=1
ro.ril.imc.enhanced.fdpch=1
ro.ril.imc.fdpch=1
ro.ril.imc.edpdch.pw.interpo=1
ro.ril.imc.hspa.dtx.drx=1
ro.ril.imc.uea2=0
ro.ril.imc.uia2=0
ro.ril.edpcch.pwr.boost=1
ro.ril.hspa.mac.ehs=1
dev.deviceimage_large=/system/customize/resource/endeavor-black_187x370.png
dev.deviceimage_small=/system/customize/resource/endeavor-black_32x58.png
ro.aa.rid=53
ro.cwkey=11111111
ro.aa.skulist=999
ro.aa.customizationid=414687
ro.aa.taskid=284179
ro.onecid=1
ro.aa.project=ENDEAVOR_U_JB_45_S
ro.aa.mainsku=0
ro.aa.modelid=PJ4610000
ro.aa.romver=4.06.999.9
ro.aa.maincid=11111111
ro.aa.report=eng
ro.aa.cidlist=11111111
ro.com.google.clientidbase=android-htc
ro.build.id=JRO03C
ro.build.display.id=endeavoru-userdebug 4.1.1 JRO03C eng..20120921.000120 release-keys
ro.build.version.incremental=112670.1
ro.build.version.sdk=16
ro.build.version.codename=REL
ro.build.version.release=4.1.1
ro.build.date=五 9月 21 00:02:23 CST 2012
ro.build.date.utc=1348156943
ro.build.type=userdebug
ro.build.user=
ro.build.host=ABM031
ro.product.model=EndeavorU
ro.product.name=endeavoru
ro.product.device=endeavoru
ro.product.board=
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=HTC
ro.product.locale.language=zh
ro.product.locale.region=CN
ro.wifi.channels=
ro.board.platform=tegra
ro.build.product=endeavoru
ro.build.description=4.06.999.9 CL112670 release-keys
ro.build.description=4.06.999.9 CL112670 release-keys
ro.build.changelist=112670
ro.build.fingerprint=release-keys/endeavoru/endeavoru:4.1.1/JRO03C/112670.1:userdebug/release-keys
ro.build.characteristics=default
ro.build.project=ENDEAVOR_U_JB_45_S:284179
ro.product.version=4.06.999.9
ro.build.languageremove=0
ro.build.sense.version=4.5
ro.build.description=4.06.999.9 CL112670 release-keys
ro.build.fingerprint=release-keys/endeavoru/endeavoru:4.1.1/JRO03C/112670.1:userdebug/release-keys
ro.build.characteristics=default
keyguard.no_require_sim=1
dalvik.vm.heapsize=128m
dalvik.vm.heapgrowthlimit=64m
ro.opengles.version = 131072
wifi.interface=wlan0
wifi.softap.interface=wlan1
wifi.softapconcurrent.interface=wlan1
rild.libpath=/system/lib/libhtc_ril.so
rild.libpath.ganlite=/system/lib/librilswitch.so
rilswitch.vendorlibpath=/system/lib/libhtc_ril.so
rilswitch.ganlibpath=/system/lib/libganril.so
rild.libargs=-e wwan0
ro.sf.lcd_density=320
ro.hwui.text_cache_width=2048
ro.hwui.text_cache_height=256
ro.telephony.default_network=0
ro.ril.enable.imc.feature=1
ro.ril.projectname=endeavoru
ro.ril.stkprof.param=FFFFFFFF7F0000DF9703021F2200000000000000000040100000000000000000
modem.fild.rootdir=/data/rfs
modem.fild.blocksize=65528
modem.fild.baudrate=3500000
modem.fild.hif=0
modem.fild.coredump=enabled
modem.fild.coredumpdir=/data/rfs/data/debug
modem.power.device=/sys/class/gpio/gpio32/value,0,1
ro.ril.devicename=/dev/ttyACM1
modem.powercontrol=disabled
# -----------------------------
# speaker volume is from 20 to 31
# this corresponds to -2dB to +8dB
# -----------------------------
audio.speaker.voice.0=20
audio.speaker.voice.1=21
audio.speaker.voice.2=24
audio.speaker.voice.3=26
audio.speaker.voice.4=28
audio.speaker.voice.5=31
# -----------------------------
# earpiece volume is from 20 to 31
# this corresponds to -2dB to +8dB
# -----------------------------
audio.earpiece.voice.0=20
audio.earpiece.voice.1=21
audio.earpiece.voice.2=24
audio.earpiece.voice.3=26
audio.earpiece.voice.4=28
audio.earpiece.voice.5=31
# -----------------------------------
# headset volume is from 9 to 14
# this corresponds to -34dB to -19dB
# ----------------------------------
audio.headset.voice.0=16
audio.headset.voice.1=19
audio.headset.voice.2=22
audio.headset.voice.3=25
audio.headset.voice.4=28
audio.headset.voice.5=31
persist.tegra.nvmmlite = 1
htc.audio.global.state=0
htc.audio.global.profile=0
persist.htc.audio.pcm.samplerate=48000
persist.htc.audio.pcm.channels=2
persist.audio.SupportHTCHWAEC=1
persist.audio.AutoSwitchMic=1
htc.audio.swalt.enable=1
htc.audio.swalt.mingain=14512
debug.nfc.fw_download=true
debug.nfc.se=true
ro.usb_host = 1
ro.phone_fat=1
ro.fat_rsvd=66
ro.bt.chipset = TI 1283
ro.bt.stack = TI BlueZ
ro.bt.stack.version = 1.1.0.3
ro.product.bluetooth = 4.0
ro.product.wifi = 802.11 a/b/g/n
init.svc.wpa_supplicant=
init.svc.dhcpcd_wlan0=
dhcp.wlan0.autoip=
dhcp.wlan0.dns1=
dhcp.wlan0.dns2=
dhcp.wlan0.dns3=
dhcp.wlan0.dns4=
dhcp.wlan0.gateway=
dhcp.wlan0.ipaddress=
dhcp.wlan0.leasetime=
dhcp.wlan0.mask=
dhcp.wlan0.ooxx=
dhcp.wlan0.pid=
dhcp.wlan0.reason=
dhcp.wlan0.result=
dhcp.wlan0.server=
net.wlan0.dns1=
net.wlan0.dns2=
wifi.wpa_supp_ready=
wlan.driver.status=
wifi.HostapdStarted=0
ro.product.display_resolution = 4.7 inch 720p resolution
ro.product.main_camera = 8M
ro.product.front_camera = 1.3M
ro.product.hwreset = 1
ro.product.hwreset.timer1 = 5
ro.product.hwreset.timer2 = 8
ro.htc.htcmode.data.path = /dev/ttyHSUSB3
ro.hdmi.enable=true
ro.product.processor = Quadcore
ro.product.ram = 1GB
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
drm.service.enabled=true
ro.setupwizard.mode=DISABLED
ro.com.google.gmsversion=4.1_r2
ro.da1.enable=true
ro.service.dpsvr.enabled=true
ro.vendor.extension_library=/system/lib/libhtc-opt2.so
dalvik.vm.lockprof.threshold=500
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
tf.enable=y
pm.sleep_mode=1
windowsmgr.max_events_per_sec=60
persist.sys.ui.hw=true
ro.telephony.call_ring.delay=0
debug.performance.tuning=1
persist.sys.NV_FPSLIMIT = 60
ro.config.nocheckin=1
ro.kernel.android.checkjni=0
ro.service.swiqi.supported=true
persist.service.swiqi.enable=1
af.resampler.quality=5
ro.ident=kingwolf
ro.build.user=kingwolf

I think is allready posted from baadnewz
http://forum.xda-developers.com/showthread.php?t=1909478

S-ON? All lenguage?
Sent from my HTC One X using xda premium

lulisat said:
I think is allready posted from baadnewz
http://forum.xda-developers.com/showthread.php?t=1909478
Click to expand...
Click to collapse
Yes! Sorry! I saw this in the Android Developement Thread.
And the ROM is not booting because you need to have S-OFF.
...please close this...

Closed

Any rom for forme discovery p1

Below is build.prob for this phone,rom or .pac file so as i can flash it.
help
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=MocorDroid2.3.5
ro.build.display.id=V2.03.07 (ID:34072)
ro.build.version.incremental=W12.20_P20.01
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=2.3.5
ro.build.date=2012年 11月 30日 星期五 14:04:11 CST
ro.build.date.utc=1354255451
ro.build.type=user
ro.build.user=edl
ro.build.host=EDL001
ro.build.tags=test-keys
ro.product.model=P1
ro.product.brand=sprd
ro.product.name=sprdroid_base
ro.product.device=hsdroid
ro.product.board=t550
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=sprd
ro.wifi.channels=
ro.board.platform=sprdbp
# ro.build.product is obsolete; use ro.product.device
ro.build.product=hsdroid
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=sprdroid_base-user 2.3.5 MocorDroid2.3.5 W12.20_P20.01 test-keys
ro.build.fingerprint=sprd/sprdroid_base/hsdroid:2.3.5/MocorDroid2.3.5/W12.20_P20.01:user/test-keys
persist.sys.timezone=Asia/Shanghai
ro.product.carrier=
ro.product.locale.language=en
ro.product.locale.region=US
ro.msms.phone_count=2sim
# end build properties
#
# system.prop for hsdroid
#
#rild.libpath=/system/lib/libsp_ril.so
#wifi.interface = tiwlan0
# Time between scans in seconds. Keep it high to minimize battery drain.
# This only affects the case in which there are remembered access points,
# but none are in range.
wifi.supplicant_scan_interval = 48
android.keylayout.sprd-keypad = /system/usr/keylayout/sprd-keypad.kl
android.keychar.sprd-keypad = /system/usr/keychars/sprd-keypad.kcm
ro.hardware =sphs
# Default network type
# 2 => AUTO Preferred.
ro.telephony.default_network = 2
# 1 => add volume control in in-call screen
ro.sprd.volume_control_icon = 1
# LCD_Density for WGVA
# ro.sf.lcd_density = 240
# LCD_Density for HVGA
ro.sf.lcd_density = 160
ro.sf.lcd_width = 45
ro.sf.lcd_height = 75
dalvik.vm.heapsize=32m
ro.opengles.version=131072
ro.internalstorage.threshold=95
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.config.notification_sound=01_Sherbet.ogg
ro.config.alarm_alert=Good_Morning.ogg
ro.config.ringtone0=S_Over_the_horizon.ogg
ro.config.ringtone1=S_Over_the_horizon.ogg
ro.com.android.dateformat=dd-MM-yyyy
ro.com.android.dataroaming=true
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt

[REQ] 1.54.401.10 build.prop

Hey all!
Is there anyone willing to dump his build.prop from the latest 1.54.401.10 who did an full update (so no custom rom one)
with regards,
Hawkysoft

Hawkysoft said:
Hey all!
Is there anyone willing to dump his build.prop from the latest 1.54.401.10 who did an full update (so no custom rom one)
with regards,
Hawkysoft
Click to expand...
Click to collapse
Code:
ro.customer.HTC__J15=PROJECT_G0005_flag, 0x0034
ro.language.HTC__J15=LANGUAGE_ARA_flag, 0x0019
ro.customer.HTC__K18=PROJECT_G0005_flag, 0x0034
ro.language.HTC__K18=LANGUAGE_ISR_flag, 0x0038
ro.ril.enable.a52=0
ro.ril.enable.a53=1
ro.ril.enable.dtm=0
ro.ril.hsdpa.category=24
ro.ril.hsupa.category=6
ro.ril.hsxpa=4
ro.ril.fast.dormancy.rule=1
ro.ril.disable.fd.plmn.prefix=23402,23410,23411,23420,23594,27202,27205
ro.ril.enable.managed.roaming=1
ro.ril.enable.sdr=1
ro.ril.n-roaming.mcclist=219,204,234,272,222,240,232
ro.ril.show.all.plmn=1
ro.ril.enable.amr.wideband=1
ro.ril.enable.r8fd=1
ro.ril.disable.cpc=1
ro.product.locale.language=en
ro.product.locale.region=US
ro.com.google.clientidbase=android-htc-rev
ro.telephony.default_network=0
ro.ril.vmail.23415=1571,BT,121,VDF UK
ro.ril.vmail.27203=171
ro.ril.vmail.65502=181
ro.ril.vmail.27211=171
ro.ril.vmail.65510=100
ro.ril.vmail.22299=4133,3ITA
ro.ril.vmail.23410=901,O2 UK,905,TESCO,443,giffgaff
ro.ril.vmail.22201=41901,I TIM
ro.ril.vmail.22210=42020,Vodafone IT
ro.ril.vmail.22288=4200,I WIND
ro.ril.vmail.20801=888
ro.ril.vmail.20810=123
ro.ril.vmail.20826=777
ro.product.model=HTC One_M8
ro.config.htc.enableCOTA=1
ro.ril.enable.pre_r8fd=1
ro.ril.fd.pre_r8_tout.scr_off=2
ro.ril.fd.pre_r8_tout.scr_on=3
ro.ril.fd.r8_tout.scr_off=2
ro.ril.fd.r8_tout.scr_on=3
ro.ril.ltefgi=1578105984
ro.ril.ltefgi.rel9=2147483648
ro.ril.lte3gpp=35
ro.customer.default=PROJECT_G0005_flag, 0x0034
ro.language.default=LANGUAGE_WWE_flag, 0x0000
ro.ril.enable.enhance.search=1
ro.ril.gsm.amrwb=1
dev.defaultwallpaper=/system/customize/resource/wallpapers_00.jpg
ro.telephony.bl=27202
ro.wifi.sim=1
# begin build properties
htc.build.stage=2
ro.aa.customizationid=802213
ro.aa.project=M8_UL_K44_SENSE60_SECURITY
ro.aa.maincid=HTC__001
ro.prot=true
ro.aa.modelid=0P6B10000
ro.aa.cidlist=HTC__001,HTC__102,HTC__203,HTC__E11,HTC__405,HTC__Y13,HTC__304,HTC__A07,HTC__032,HTC__J15,HTC__016,HTC__M27,HTC__K18,HTC__A48,HTC__002
ro.aa.rid=1453
ro.aa.taskid=377296
ro.aa.report=com
ro.aa.skulist=401
ro.aa.mainsku=401
ro.aa.romver=1.54.401.10
ro.onecid=
ro.cwkey=CWS__001
# autogenerated by buildinfo.sh
ro.build.id=KOT49H
ro.build.display.id=KOT49H release-keys
ro.build.version.incremental=325784.10
ro.build.version.sdk=19
ro.build.version.codename=REL
ro.build.version.release=4.4.2
ro.build.date=二 5月 13 18:52:23 CST 2014
ro.build.date.utc=1399978343
ro.build.type=user
ro.build.user=buildteam
ro.build.host=abm022
ro.build.tags=release-keys
ro.product.brand=htc
ro.product.name=htc_europe
ro.product.device=htc_m8
ro.product.board=MSM8974
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=HTC
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=msm8974
# ro.build.product is obsolete; use ro.product.device
ro.build.product=htc_m8
ro.build.description=1.54.401.10 CL325784 release-keys
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=1.54.401.10 CL325784 release-keys
ro.build.changelist=325784
ro.build.fingerprint=htc/htc_europe/htc_m8:4.4.2/KOT49H/325784.10:user/release-keys
ro.build.characteristics=default
ro.build.project=M8_UL_K44_SENSE60_SECURITY:377296
ro.build.sku=HTC Europe
ro.product.version=1.54.401.10
ro.build.languageremove=0
ro.build.sense.version=6.0
ro.build.version.htcsdk=HTCExt:HTCExtension_Sense60_442_3;SDK:6.17;hdkbase:19.1
ro.build.description=1.54.401.10 CL325784 release-keys
ro.build.fingerprint=htc/htc_europe/htc_m8:4.4.2/KOT49H/325784.10:user/release-keys
keyguard.no_require_sim=1
# end build properties
#
# from device/htc/htc_m8/system.prop
#
#
# system.prop for msm8974
#
rild.libpath=/vendor/lib/libril-qc-qmi-1.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1
# Default network type.
# 9 => GSM/UMTS/LTE mode preferred.
ro.telephony.default_network=9
#
# system props for display
#
debug.sf.hw=1
debug.egl.hw=1
debug.composition.type=gpu
persist.hwc.mdpcomp.enable=true
ro.hwui.renderer.disable_opaque=true
ro.sf.lcd_density=480
debug.mdpcomp.logs=0
# Display Info
ro.product.display_resolution = 5 inch 1080p resolution
dalvik.vm.heapsize=512m
dalvik.vm.heapgrowthlimit=192m
dalvik.vm.heapstartsize=8m
dalvik.vm.heapmaxfree=8m
dalvik.vm.heapminfree=2m
dev.pm.dyn_samplingrate=1
persist.demo.hdmirotationlock=false
# +SSD_RIL
ro.baseband.arch=msm
# +SSD_RIL Enable fill EONS
persist.radio.fill_eons=1
# Enable IMS service by default
persist.radio.jbims=1
# Current VT project need to be added
persist.rmnet.mux=enabled
persist.data.iwlan.enable=true
# -SSD_RIL
ro.hdmi.enable=true
tunnel.decode=true
tunnel.audiovideo.decode=true
lpa.decode=true
lpa.use-stagefright=true
persist.speaker.prot.enable=false
qcom.hw.aac.encoder=true
use.voice.path.for.pcm.voip=true
#
# system props for the cne module
#
persist.cne.feature=1
#system props for the MM modules
media.stagefright.enable-player=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-fma2dp=true
media.stagefright.enable-scan=true
mmp.enable.3g2=true
mm.enable.smoothstreaming=true
media.aac_51_output_enabled=true
#37491 is decimal sum of supported codecs in AAL
#codecs: AVI AC3 ASF AAC QCP DTS 3G2 MP2TS
mm.enable.qcom_parser=37491
# VIDC: debug_levels
# 1:ERROR 2:HIGH 4:LOW 0:NOLOGS 7:AllLOGS
vidc.debug.level=3
#
# system props for the data modules
#
ro.use_data_netmgrd=true
persist.data.netmgrd.qos.enable=true
ro.data.large_tcp_window_size=true
#system props for time-services
persist.timed.enable=true
# System props for audio
# System props for soundhound
persist.htc.audio.pcm.samplerate=48000
persist.htc.audio.pcm.channels=2
# System prop to select audio resampler quality
af.resampler.quality=4
# System props for global effect
htc.audio.global.state=0
htc.audio.global.profile=0
htc.audio.q6.topology=0
htc.audio.global.speaker=1
#
# system prop for opengles version
#
# 196608 is decimal for 0x30000 to report version 3
ro.opengles.version=196608
#
# system prop for Bluetooth Dialup Networking
#
ro.qualcomm.bluetooth.dun=false
# system prop for Bluetooth FTP profile
ro.qualcomm.bluetooth.ftp=true
#
# system property for Bluetooth Handsfree Profile Wide Band Speech
#
ro.qualcomm.bluetooth.hfp.wbs=false
#
#system prop for Bluetooth hci transport
ro.qualcomm.bt.hci_transport=smd
#
# system prop for requesting Master role in incoming Bluetooth connection.
#
ro.bluetooth.request.master=true
#
# system prop for Bluetooth Auto connect for remote initated connections
#
ro.bluetooth.remote.autoconnect=true
# system property for Bluetooth discoverability time out in seconds
# 0: Always discoverable
#debug.bt.discoverable_time=0
# system property for Bluetooth Hardware information
ro.product.bluetooth=4.0
# config fm rssi threshold
#service.qct.fm.rssi=116
#SSD_BT- bluetooth
# system property for qcom Bluetooth stack
ro.qc.bluetooth.stack=bluedroid
# system property for bdaddr
ro.bt.bdaddr_path = /sys/module/htc_bdaddress/parameters/bdaddress
# BLE TAG (HtcBluetoothLeProfiles)
ro.bt.ble_tag = 1
# System property for cabl
#ro.qualcomm.cabl=1
#
# System props for telephony
# System prop to turn on CdmaLTEPhone always
#+ SSD_RIL: disable default value by MASD request
#telephony.lteOnCdmaDevice=1
#- SSD_RIL: disable default value by MASD request
#Simulate sdcard on /data/media
#
persist.fuse_sdcard=true
# ro.storage_structure: define the storage structure of this project
# FUSE: 0x8, FAT: 0x4, SD: 0x2, INS: 0x1
# Example: If the project has FUSE with SD card, the value should be defined as 10 (dec)
ro.storage_structure = 10
# ro.storage_encryption_type: define the storage encryption type of this project
# not support encryption: 0x0 block level: 0x1 file level: 0x2
ro.storage_encryption_type = 2
#For usb storage
ro.usb_host = 1
#
#snapdragon value add features
#
ro.qc.sdk.audio.ssr=false
##fluencetype can be "fluence" or "fluencepro" or "none"
ro.qc.sdk.audio.fluencetype=none
ro.qc.sdk.sensors.gestures=true
ro.qc.sdk.gestures.camera=false
ro.qc.sdk.camera.facialproc=false
#property to enable user to access Google WFD settings.
persist.debug.wfd.enable=1
#property to choose between virtual/external wfd display
persist.sys.wfd.virtual=0
# Following property will be reference by Settings.
ro.product.main_camera =HTC UltraPixel Camera
ro.product.front_camera = 5M
# Support HW rest
ro.product.hwreset = 1
ro.product.hwreset.timer1 = 6
ro.product.hwreset.timer2 = 9
# M8 HW info
ro.product.ram = 2GB
# wifi
wifi.softap.interface=wlan0
wifi.softapconcurrent.interface=softap.0
wifi.miracastconcurrent.scan=WCN3680
init.svc.wpa_supplicant=
init.svc.dhcpcd_wlan0=
dhcp.wlan0.autoip=
dhcp.wlan0.dns1=
dhcp.wlan0.dns2=
dhcp.wlan0.dns3=
dhcp.wlan0.dns4=
dhcp.wlan0.gateway=
dhcp.wlan0.ipaddress=
dhcp.wlan0.leasetime=
dhcp.wlan0.mask=
dhcp.wlan0.ooxx=
dhcp.wlan0.pid=
dhcp.wlan0.reason=
dhcp.wlan0.result=
dhcp.wlan0.server=
net.wlan0.dns1=
net.wlan0.dns2=
wifi.wpa_supp_ready=
wlan.driver.status=
wifi.interface=wlan0
wifi.supplicant_scan_interval=15
persist.wifi.v6=true
persist.wifi.v6.rs.count=5
persist.wifi.v6.rs.timeout=5
ro.product.wifi = 802.11 a/b/g/n/ac
sys.stt.ssr.no_prompt=1
tunnel.audio.encode = true
# For Embadded DIAG
ro.chipset.vendor=QCT
ro.chipset.model=MSM8974
ro.chipset.version=1.x
# ro.storage_encryption_type: define the storage encryption type of this project
# not support encryption: 0x0 block level: 0x1 file level: 0x2
ro.storage_encryption_type = 2
#
# ADDITIONAL_BUILD_PROPERTIES
#
persist.preload.common=1
persist.zygote.preload_threads=3
persist.camera.antibanding=50
persist.camera.tuning_spec=htc
ro.com.android.dataroaming=false
persist.sys.logkit.ctrlcode=0
keyguard.no_require_sim=true
ro.config.ringtone=Ring_Synth_04.ogg
ro.config.notification_sound=pixiedust.ogg
ro.carrier=unknown
drm.service.enabled=true
ro.setupwizard.mode=OPTIONAL
ro.com.google.gmsversion=4.4.2_r1
ro.config.alarm_alert=Alarm_Classic.ogg
ro.vendor.extension_library=/vendor/lib/libqc-opt.so
persist.sys.dalvik.vm.lib=libdvm.so
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.qc.sdk.izat.premium_enabled=0
ro.qc.sdk.izat.service_mask=0x0
persist.gps.qc_nlp_in_use=0
ro.gps.agps_provider=1

Thanks mate
Sent from my HTC One_M8 using XDA Premium 4 mobile app

[STOCK ROM][FTF] Xperia T3 (D5103) 18.1.A.1.14 3 SE

Xperia™ T3 (D5103) 3 SE firmware FTF
Android version: 4.4.2
Kernel: 3.4.0 [email protected] #1 Fri Jun 6 14:55:30 CST 2014
Build number: 18.1.A.1.14
File System Version: GLOBAL-LTE_18.1.A.1.14
Customization Version: 1285-5313_R4B
Branding: 3 SE (branded)
Country: Sweden
This works on ANY Xperia™ T3 (D5103).
Your Xperia™ T3 does NOT have to be rooted.
Your Xperia™ T3 does NOT have to be bootloader unlocked.
This does NOT re-lock a SIM unlocked phone (unlocking is ONCE and PERMANENT).
This does NOT unlock your bootloader.
Download:
D5103 18.1.A.1.14 FTF ( 982.5 MB )
Build Prop
Code:
##### Merging of the /util/data/semc_kernel_time_stamp.prop file #####
ro.build.date=Fri Jun 6 14:55:30 CST 2014
ro.build.date.utc=1402037730
ro.build.user=user
ro.build.host=SB2
##### Final patch of properties #####
ro.build.product=D5103
ro.build.description=D5103-user 4.4.2 18.1.A.1.14 8ft_bw release-keys
ro.product.brand=Sony
ro.product.name=D5103
ro.product.device=D5103
ro.build.version.incremental=8ft_bw
ro.build.tags=release-keys
ro.build.fingerprint=Sony/D5103/D5103:4.4.2/18.1.A.1.14/8ft_bw:user/release-keys
######################## Customized property values #########################
ro.semc.version.cust=1285-5313
ro.semc.version.cust_revision=R4B
ro.somc.customerid=59
#############################################################################
################# Updating of the SW Version #################
ro.semc.version.fs_revision=18.1.A.1.14
ro.build.id=18.1.A.1.14
ro.build.display.id=18.1.A.1.14
##### Values from product package metadata #####
ro.semc.product.model=D5103
ro.semc.ms_type_id=PM-0730-BV
ro.semc.version.fs=GLOBAL-LTE
ro.semc.product.name=Xperia T3
ro.semc.product.device=D51
ro.product.model=D5103
# begin build properties
# autogenerated by buildinfo.sh
ro.si.version.sw_revision=2.24.J.1.26
ro.build.version.sdk=19
ro.build.version.codename=REL
ro.build.version.release=4.4.2
ro.build.type=user
ro.product.board=MSM8226
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=Sony
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=msm8226
# ro.build.product is obsolete; use ro.product.device
# Do not try to parse ro.build.description or .fingerprint
ro.build.characteristics=default
# end build properties
#
# from device/somc/seagull_lte/system.prop
#
#
# system.prop for msm8226
#
# Use reference RIL for initial bringup
#rild.libpath=/system/lib/libreference-ril.so
rild.libpath=/vendor/lib/libril-qc-qmi-1.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1
persist.radio.msgtunnel.start=false
# Start in cdma mode
#ro.telephony.default_network=5
#
# system props for the cne module
#
persist.cne.feature=1
# Skip /sys/power/wait_for_fb_* nodes and
# force FB to be always on
debug.sf.fb_always_on=1
debug.sf.hw=1
debug.egl.hw=1
debug.composition.type=c2d
persist.hwc.mdpcomp.enable=true
debug.mdpcomp.mixedmode.disable=true
debug.mdpcomp.logs=0
dalvik.vm.heapsize=36m
dev.pm.dyn_samplingrate=1
persist.demo.hdmirotationlock=false
ro.hdmi.enable=true
qcom.hw.aac.encoder=true
#system props for the MM modules
media.stagefright.enable-player=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-fma2dp=true
media.stagefright.enable-scan=true
mmp.enable.3g2=true
mm.enable.smoothstreaming=true
#9273 is decimal sum of supported codecs in AAL
#codecs:(PARSER_)AVI AC3 ASF AAC QCP DTS 3G2 MP2TS
mm.enable.qcom_parser=37491
# VIDC: debug_levels
# 1:ERROR 2:HIGH 4:LOW 0:NOlogs 7:AllLogs
vidc.debug.level=1
#
# system props for the data modules
#
ro.use_data_netmgrd=true
persist.data.netmgrd.qos.enable=true
#system props for time-services
persist.timed.enable=true
#+{WP1L2P2-PC-DISTINGUISH_PROJECTS_VIA_SYSTEM_PROPERTY-01
# add product type property
ro.telephony.fxn_product_type=SEAGULL_LTE
#WP1L2P2-PC-DISTINGUISH_PROJECTS_VIA_SYSTEM_PROPERTY-01}+
#
# system prop for opengles version
#
# 196608 is decimal for 0x30000 to report version 3
ro.opengles.version=196608
#
# System props for telephony
# System prop to turn on CdmaLTEPhone always
#telephony.lteOnCdmaDevice=1//-WP1L2P2-PC-SET_CDMA_DEVICE_PROPERTY_TO_FALSE-01
#+{WP1L2P2-PC-SET_CDMA_DEVICE_PROPERTY_TO_FALSE-01
telephony.lteOnCdmaDevice=0
#WP1L2P2-PC-SET_CDMA_DEVICE_PROPERTY_TO_FALSE-01}+
#//+{WP1L2P2-AS-NETWORK_LIST_RAT_SUPPORT-01
persist.radio.rat_on=combine
#WP1L2P2-AS-NETWORK_LIST_RAT_SUPPORT-01}+
# simulate sdcard on /data/media
#
persist.fuse_sdcard=true
#
#snapdragon value add features
#
ro.qc.sdk.audio.ssr=false
##fluencetype can be "fluence" or "fluencepro" or "none"
ro.qc.sdk.audio.fluencetype=none
#+{WP1L2P3-AC-SET_RIL_LOG_LVL-01
#
# Set default adb_log_on value
#
persist.radio.adb_log_on=1
#WP1L2P3-AC-SET_RIL_LOG_LVL-01}+
persist.audio.fluence.voicecall=true
persist.audio.fluence.voicerec=false
persist.audio.fluence.speaker=true
#/* MM-KW-DISPLAY-00+{ */
# Enable/disable cabl
ro.qualcomm.cabl=0
#/* MM-KW-DISPLAY-00+} */
#MobileBraviaEngine2
ro.service.swiqi2.supported=true
persist.service.swiqi2.enable=1
# system prop for NFC DT
ro.nfc.port=I2C
#property to enable user to access Google WFD settings
persist.debug.wfd.enable=1
##property to choose between virtual/external wfd display
persist.sys.wfd.virtual=0
tunnel.audio.encode = true
#use VERY_HIGH_QUALITY for audio resampler
af.resampler.quality=4
#Buffer size in kbytes for compress offload playback
# System prop for drm
drm.service.enabled=true
#Added system property for xLoud and ClearPhase
ro.somc.clearphase.supported=true
ro.semc.xloud.supported=true
persist.audio.hp=true
audio.offload.buffer.size.kb=32
#/* MM-CL-Offload-00*{ */
#disbale tunnel mode playback by default
audio.offload.disable=1
#disbale offload audio video playback by default
av.offload.enable=false
#/* MM-CL-Offload-00*} */
#enable voice path for PCM VoIP by default
use.voice.path.for.pcm.voip=true
#enable dsp gapless mode by default
audio.offload.gapless.enabled=true
# disable AssetAtlas service.
config.disable_atlas=true
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.product-res-path=framework/SemcGenericUxpRes.apk
persist.sys.logkit.ctrlcode=0
keyguard.no_require_sim=true
ro.com.android.dataroaming=false
ro.com.android.dateformat=MM-dd-yyyy
ro.config.ringtone=xperia.ogg
ro.config.notification_sound=notification.ogg
ro.config.alarm_alert=alarm.ogg
ro.config.wallpaper=hero_flow_black.png
ro.nfc.on.default=true
ro.carrier=unknown
ro.vendor.extension_library=/vendor/lib/libqc-opt.so
persist.radio.apm_sim_not_pwdn=1
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=96m
dalvik.vm.heapsize=256m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=2m
dalvik.vm.heapmaxfree=8m
ro.setupwizard.mode=DISABLED
ro.com.google.gmsversion=4.4_r3
ro.com.google.clientidbase=android-sonyericsson
ro.com.google.clientidbase.ms=android-sonymobile
persist.sys.dalvik.vm.lib=libdvm.so
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.qc.sdk.izat.premium_enabled=1
ro.qc.sdk.izat.service_mask=0x5
persist.gps.qc_nlp_in_use=1
persist.loc.nlp_name=com.qualcomm.services.location
ro.gps.agps_provider=1
ro.drm.active.num=7
ro.drm.active.0=marlin,1
ro.drm.active.1=playready,1
ro.drm.active.2=dtla,1
ro.drm.active.3=marlin_import,1
ro.drm.active.4=ckb,1
ro.drm.active.5=widevine,1
ro.drm.active.6=dcp,1
ro.sony.fota.encrypteddata=supported
Mirrors Are Welcomed
Credits
M.Allen
Please Hit
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If It Helps You

@Ben Ling Can u please upload kernel.sin from it? Mega seems down and I'll have to download whole of the ftf just for the kernel
Cheers,
AJ

Abhinav2 said:
@Ben Ling Can u please upload kernel.sin from it? Mega seems down and I'll have to download whole of the ftf just for the kernel
Cheers,
AJ
Click to expand...
Click to collapse
okay sure
there you go...
http://d-h.st/z20

Ben Ling said:
okay sure
there you go...
http://d-h.st/z20
Click to expand...
Click to collapse
Thanks BTW u own the device
EDIT: or know someone who does? @Ben Ling
Cheers,
AJ

Abhinav2 said:
Thanks BTW u own the device or no someone who does?
Cheers,
AJ
Click to expand...
Click to collapse
I didn't own it,I only have the Xperia Z...

Ben,
thank you very much for posting this .ftf for us!
I own a T3 and unlocked the bootloader however once I did it, the phone entered boot loop. After trying to flash a different kernel it doesn't leave the SONY screen at all. I tried using the flashtool by Androxyde but I always get "cannot open bundle error". Below are the messages I always get:
0/056/2014 17:56:14 - INFO - Selected Bundle for D5103. FW release : 18.1.A.1.14. Customization : 3 [email protected]
20/056/2014 17:56:14 - INFO - Preparing files for flashing
20/057/2014 17:57:24 - ERROR - .\firmwares\prepared\elabel-D5103-row_201406131600.1_18.1.A.1.14.sin (Acess denied)
20/057/2014 17:57:24 - INFO - Cannot open bundle. Flash operation canceled
Once I connect the phone to the USB while pushing the volume down button flashtool quickly recognizes it's in flashmode but then it appears to have lost the connection.
How can I successfully return my phone to factory status?
Thanks for your help!
JZ
---------- Post added at 08:00 PM ---------- Previous post was at 07:18 PM ----------
Ok, I passed the "access denied error". For some reason even though I was running flashtool as root the application wasn't being able to create the files on its directory. I transferred all files to my user folder and flashtool prepared the files correctly. Now I have a working phone again! I wish I was able to remove the branding though.
Best Regads,
JZ
jzeuro2 said:
Ben,
thank you very much for posting this .ftf for us!
I own a T3 and unlocked the bootloader however once I did it, the phone entered boot loop. After trying to flash a different kernel it doesn't leave the SONY screen at all. I tried using the flashtool by Androxyde but I always get "cannot open bundle error". Below are the messages I always get:
0/056/2014 17:56:14 - INFO - Selected Bundle for D5103. FW release : 18.1.A.1.14. Customization : 3 [email protected]
20/056/2014 17:56:14 - INFO - Preparing files for flashing
20/057/2014 17:57:24 - ERROR - .\firmwares\prepared\elabel-D5103-row_201406131600.1_18.1.A.1.14.sin (Acess denied)
20/057/2014 17:57:24 - INFO - Cannot open bundle. Flash operation canceled
Once I connect the phone to the USB while pushing the volume down button flashtool quickly recognizes it's in flashmode but then it appears to have lost the connection.
How can I successfully return my phone to factory status?
Thanks for your help!
JZ
Click to expand...
Click to collapse

Ben Ling said:
Xperia™ T3 (D5103) 3 SE firmware FTF
Android version: 4.4.2
Kernel: 3.4.0 [email protected] #1 Fri Jun 6 14:55:30 CST 2014
Build number: 18.1.A.1.14
File System Version: GLOBAL-LTE_18.1.A.1.14
Customization Version: 1285-5313_R4B
Branding: 3 SE (branded)
Country: Sweden
This works on ANY Xperia™ T3 (D5103).
Your Xperia™ T3 does NOT have to be rooted.
Your Xperia™ T3 does NOT have to be bootloader unlocked.
This does NOT re-lock a SIM unlocked phone (unlocking is ONCE and PERMANENT).
This does NOT unlock your bootloader.
Download:
D5103 18.1.A.1.14 FTF ( 982.5 MB )
Build Prop
Code:
##### Merging of the /util/data/semc_kernel_time_stamp.prop file #####
ro.build.date=Fri Jun 6 14:55:30 CST 2014
ro.build.date.utc=1402037730
ro.build.user=user
ro.build.host=SB2
##### Final patch of properties #####
ro.build.product=D5103
ro.build.description=D5103-user 4.4.2 18.1.A.1.14 8ft_bw release-keys
ro.product.brand=Sony
ro.product.name=D5103
ro.product.device=D5103
ro.build.version.incremental=8ft_bw
ro.build.tags=release-keys
ro.build.fingerprint=Sony/D5103/D5103:4.4.2/18.1.A.1.14/8ft_bw:user/release-keys
######################## Customized property values #########################
ro.semc.version.cust=1285-5313
ro.semc.version.cust_revision=R4B
ro.somc.customerid=59
#############################################################################
################# Updating of the SW Version #################
ro.semc.version.fs_revision=18.1.A.1.14
ro.build.id=18.1.A.1.14
ro.build.display.id=18.1.A.1.14
##### Values from product package metadata #####
ro.semc.product.model=D5103
ro.semc.ms_type_id=PM-0730-BV
ro.semc.version.fs=GLOBAL-LTE
ro.semc.product.name=Xperia T3
ro.semc.product.device=D51
ro.product.model=D5103
# begin build properties
# autogenerated by buildinfo.sh
ro.si.version.sw_revision=2.24.J.1.26
ro.build.version.sdk=19
ro.build.version.codename=REL
ro.build.version.release=4.4.2
ro.build.type=user
ro.product.board=MSM8226
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=Sony
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=msm8226
# ro.build.product is obsolete; use ro.product.device
# Do not try to parse ro.build.description or .fingerprint
ro.build.characteristics=default
# end build properties
#
# from device/somc/seagull_lte/system.prop
#
#
# system.prop for msm8226
#
# Use reference RIL for initial bringup
#rild.libpath=/system/lib/libreference-ril.so
rild.libpath=/vendor/lib/libril-qc-qmi-1.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1
persist.radio.msgtunnel.start=false
# Start in cdma mode
#ro.telephony.default_network=5
#
# system props for the cne module
#
persist.cne.feature=1
# Skip /sys/power/wait_for_fb_* nodes and
# force FB to be always on
debug.sf.fb_always_on=1
debug.sf.hw=1
debug.egl.hw=1
debug.composition.type=c2d
persist.hwc.mdpcomp.enable=true
debug.mdpcomp.mixedmode.disable=true
debug.mdpcomp.logs=0
dalvik.vm.heapsize=36m
dev.pm.dyn_samplingrate=1
persist.demo.hdmirotationlock=false
ro.hdmi.enable=true
qcom.hw.aac.encoder=true
#system props for the MM modules
media.stagefright.enable-player=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-fma2dp=true
media.stagefright.enable-scan=true
mmp.enable.3g2=true
mm.enable.smoothstreaming=true
#9273 is decimal sum of supported codecs in AAL
#codecs:(PARSER_)AVI AC3 ASF AAC QCP DTS 3G2 MP2TS
mm.enable.qcom_parser=37491
# VIDC: debug_levels
# 1:ERROR 2:HIGH 4:LOW 0:NOlogs 7:AllLogs
vidc.debug.level=1
#
# system props for the data modules
#
ro.use_data_netmgrd=true
persist.data.netmgrd.qos.enable=true
#system props for time-services
persist.timed.enable=true
#+{WP1L2P2-PC-DISTINGUISH_PROJECTS_VIA_SYSTEM_PROPERTY-01
# add product type property
ro.telephony.fxn_product_type=SEAGULL_LTE
#WP1L2P2-PC-DISTINGUISH_PROJECTS_VIA_SYSTEM_PROPERTY-01}+
#
# system prop for opengles version
#
# 196608 is decimal for 0x30000 to report version 3
ro.opengles.version=196608
#
# System props for telephony
# System prop to turn on CdmaLTEPhone always
#telephony.lteOnCdmaDevice=1//-WP1L2P2-PC-SET_CDMA_DEVICE_PROPERTY_TO_FALSE-01
#+{WP1L2P2-PC-SET_CDMA_DEVICE_PROPERTY_TO_FALSE-01
telephony.lteOnCdmaDevice=0
#WP1L2P2-PC-SET_CDMA_DEVICE_PROPERTY_TO_FALSE-01}+
#//+{WP1L2P2-AS-NETWORK_LIST_RAT_SUPPORT-01
persist.radio.rat_on=combine
#WP1L2P2-AS-NETWORK_LIST_RAT_SUPPORT-01}+
# simulate sdcard on /data/media
#
persist.fuse_sdcard=true
#
#snapdragon value add features
#
ro.qc.sdk.audio.ssr=false
##fluencetype can be "fluence" or "fluencepro" or "none"
ro.qc.sdk.audio.fluencetype=none
#+{WP1L2P3-AC-SET_RIL_LOG_LVL-01
#
# Set default adb_log_on value
#
persist.radio.adb_log_on=1
#WP1L2P3-AC-SET_RIL_LOG_LVL-01}+
persist.audio.fluence.voicecall=true
persist.audio.fluence.voicerec=false
persist.audio.fluence.speaker=true
#/* MM-KW-DISPLAY-00+{ */
# Enable/disable cabl
ro.qualcomm.cabl=0
#/* MM-KW-DISPLAY-00+} */
#MobileBraviaEngine2
ro.service.swiqi2.supported=true
persist.service.swiqi2.enable=1
# system prop for NFC DT
ro.nfc.port=I2C
#property to enable user to access Google WFD settings
persist.debug.wfd.enable=1
##property to choose between virtual/external wfd display
persist.sys.wfd.virtual=0
tunnel.audio.encode = true
#use VERY_HIGH_QUALITY for audio resampler
af.resampler.quality=4
#Buffer size in kbytes for compress offload playback
# System prop for drm
drm.service.enabled=true
#Added system property for xLoud and ClearPhase
ro.somc.clearphase.supported=true
ro.semc.xloud.supported=true
persist.audio.hp=true
audio.offload.buffer.size.kb=32
#/* MM-CL-Offload-00*{ */
#disbale tunnel mode playback by default
audio.offload.disable=1
#disbale offload audio video playback by default
av.offload.enable=false
#/* MM-CL-Offload-00*} */
#enable voice path for PCM VoIP by default
use.voice.path.for.pcm.voip=true
#enable dsp gapless mode by default
audio.offload.gapless.enabled=true
# disable AssetAtlas service.
config.disable_atlas=true
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.product-res-path=framework/SemcGenericUxpRes.apk
persist.sys.logkit.ctrlcode=0
keyguard.no_require_sim=true
ro.com.android.dataroaming=false
ro.com.android.dateformat=MM-dd-yyyy
ro.config.ringtone=xperia.ogg
ro.config.notification_sound=notification.ogg
ro.config.alarm_alert=alarm.ogg
ro.config.wallpaper=hero_flow_black.png
ro.nfc.on.default=true
ro.carrier=unknown
ro.vendor.extension_library=/vendor/lib/libqc-opt.so
persist.radio.apm_sim_not_pwdn=1
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=96m
dalvik.vm.heapsize=256m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=2m
dalvik.vm.heapmaxfree=8m
ro.setupwizard.mode=DISABLED
ro.com.google.gmsversion=4.4_r3
ro.com.google.clientidbase=android-sonyericsson
ro.com.google.clientidbase.ms=android-sonymobile
persist.sys.dalvik.vm.lib=libdvm.so
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.qc.sdk.izat.premium_enabled=1
ro.qc.sdk.izat.service_mask=0x5
persist.gps.qc_nlp_in_use=1
persist.loc.nlp_name=com.qualcomm.services.location
ro.gps.agps_provider=1
ro.drm.active.num=7
ro.drm.active.0=marlin,1
ro.drm.active.1=playready,1
ro.drm.active.2=dtla,1
ro.drm.active.3=marlin_import,1
ro.drm.active.4=ckb,1
ro.drm.active.5=widevine,1
ro.drm.active.6=dcp,1
ro.sony.fota.encrypteddata=supported
Mirrors Are Welcomed
Credits
M.Allen
Please Hit
If It Helps You
Click to expand...
Click to collapse
Can you make a zip file of System? @Ben Ling

Bro can u port cyanogenmod rom for t3 d5102
Ben Ling said:
Xperia™ T3 (D5103) 3 SE firmware FTF
Android version: 4.4.2
Kernel: 3.4.0 [email protected] #1 Fri Jun 6 14:55:30 CST 2014
Build number: 18.1.A.1.14
File System Version: GLOBAL-LTE_18.1.A.1.14
Customization Version: 1285-5313_R4B
Branding: 3 SE (branded)
Country: Sweden
This works on ANY Xperia™ T3 (D5103).
Your Xperia™ T3 does NOT have to be rooted.
Your Xperia™ T3 does NOT have to be bootloader unlocked.
This does NOT re-lock a SIM unlocked phone (unlocking is ONCE and PERMANENT).
This does NOT unlock your bootloader.
Download:
D5103 18.1.A.1.14 FTF ( 982.5 MB )
Build Prop
Code:
##### Merging of the /util/data/semc_kernel_time_stamp.prop file #####
ro.build.date=Fri Jun 6 14:55:30 CST 2014
ro.build.date.utc=1402037730
ro.build.user=user
ro.build.host=SB2
##### Final patch of properties #####
ro.build.product=D5103
ro.build.description=D5103-user 4.4.2 18.1.A.1.14 8ft_bw release-keys
ro.product.brand=Sony
ro.product.name=D5103
ro.product.device=D5103
ro.build.version.incremental=8ft_bw
ro.build.tags=release-keys
ro.build.fingerprint=Sony/D5103/D5103:4.4.2/18.1.A.1.14/8ft_bw:user/release-keys
######################## Customized property values #########################
ro.semc.version.cust=1285-5313
ro.semc.version.cust_revision=R4B
ro.somc.customerid=59
#############################################################################
################# Updating of the SW Version #################
ro.semc.version.fs_revision=18.1.A.1.14
ro.build.id=18.1.A.1.14
ro.build.display.id=18.1.A.1.14
##### Values from product package metadata #####
ro.semc.product.model=D5103
ro.semc.ms_type_id=PM-0730-BV
ro.semc.version.fs=GLOBAL-LTE
ro.semc.product.name=Xperia T3
ro.semc.product.device=D51
ro.product.model=D5103
# begin build properties
# autogenerated by buildinfo.sh
ro.si.version.sw_revision=2.24.J.1.26
ro.build.version.sdk=19
ro.build.version.codename=REL
ro.build.version.release=4.4.2
ro.build.type=user
ro.product.board=MSM8226
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=Sony
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=msm8226
# ro.build.product is obsolete; use ro.product.device
# Do not try to parse ro.build.description or .fingerprint
ro.build.characteristics=default
# end build properties
#
# from device/somc/seagull_lte/system.prop
#
#
# system.prop for msm8226
#
# Use reference RIL for initial bringup
#rild.libpath=/system/lib/libreference-ril.so
rild.libpath=/vendor/lib/libril-qc-qmi-1.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1
persist.radio.msgtunnel.start=false
# Start in cdma mode
#ro.telephony.default_network=5
#
# system props for the cne module
#
persist.cne.feature=1
# Skip /sys/power/wait_for_fb_* nodes and
# force FB to be always on
debug.sf.fb_always_on=1
debug.sf.hw=1
debug.egl.hw=1
debug.composition.type=c2d
persist.hwc.mdpcomp.enable=true
debug.mdpcomp.mixedmode.disable=true
debug.mdpcomp.logs=0
dalvik.vm.heapsize=36m
dev.pm.dyn_samplingrate=1
persist.demo.hdmirotationlock=false
ro.hdmi.enable=true
qcom.hw.aac.encoder=true
#system props for the MM modules
media.stagefright.enable-player=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-fma2dp=true
media.stagefright.enable-scan=true
mmp.enable.3g2=true
mm.enable.smoothstreaming=true
#9273 is decimal sum of supported codecs in AAL
#codecs:(PARSER_)AVI AC3 ASF AAC QCP DTS 3G2 MP2TS
mm.enable.qcom_parser=37491
# VIDC: debug_levels
# 1:ERROR 2:HIGH 4:LOW 0:NOlogs 7:AllLogs
vidc.debug.level=1
#
# system props for the data modules
#
ro.use_data_netmgrd=true
persist.data.netmgrd.qos.enable=true
#system props for time-services
persist.timed.enable=true
#+{WP1L2P2-PC-DISTINGUISH_PROJECTS_VIA_SYSTEM_PROPERTY-01
# add product type property
ro.telephony.fxn_product_type=SEAGULL_LTE
#WP1L2P2-PC-DISTINGUISH_PROJECTS_VIA_SYSTEM_PROPERTY-01}+
#
# system prop for opengles version
#
# 196608 is decimal for 0x30000 to report version 3
ro.opengles.version=196608
#
# System props for telephony
# System prop to turn on CdmaLTEPhone always
#telephony.lteOnCdmaDevice=1//-WP1L2P2-PC-SET_CDMA_DEVICE_PROPERTY_TO_FALSE-01
#+{WP1L2P2-PC-SET_CDMA_DEVICE_PROPERTY_TO_FALSE-01
telephony.lteOnCdmaDevice=0
#WP1L2P2-PC-SET_CDMA_DEVICE_PROPERTY_TO_FALSE-01}+
#//+{WP1L2P2-AS-NETWORK_LIST_RAT_SUPPORT-01
persist.radio.rat_on=combine
#WP1L2P2-AS-NETWORK_LIST_RAT_SUPPORT-01}+
# simulate sdcard on /data/media
#
persist.fuse_sdcard=true
#
#snapdragon value add features
#
ro.qc.sdk.audio.ssr=false
##fluencetype can be "fluence" or "fluencepro" or "none"
ro.qc.sdk.audio.fluencetype=none
#+{WP1L2P3-AC-SET_RIL_LOG_LVL-01
#
# Set default adb_log_on value
#
persist.radio.adb_log_on=1
#WP1L2P3-AC-SET_RIL_LOG_LVL-01}+
persist.audio.fluence.voicecall=true
persist.audio.fluence.voicerec=false
persist.audio.fluence.speaker=true
#/* MM-KW-DISPLAY-00+{ */
# Enable/disable cabl
ro.qualcomm.cabl=0
#/* MM-KW-DISPLAY-00+} */
#MobileBraviaEngine2
ro.service.swiqi2.supported=true
persist.service.swiqi2.enable=1
# system prop for NFC DT
ro.nfc.port=I2C
#property to enable user to access Google WFD settings
persist.debug.wfd.enable=1
##property to choose between virtual/external wfd display
persist.sys.wfd.virtual=0
tunnel.audio.encode = true
#use VERY_HIGH_QUALITY for audio resampler
af.resampler.quality=4
#Buffer size in kbytes for compress offload playback
# System prop for drm
drm.service.enabled=true
#Added system property for xLoud and ClearPhase
ro.somc.clearphase.supported=true
ro.semc.xloud.supported=true
persist.audio.hp=true
audio.offload.buffer.size.kb=32
#/* MM-CL-Offload-00*{ */
#disbale tunnel mode playback by default
audio.offload.disable=1
#disbale offload audio video playback by default
av.offload.enable=false
#/* MM-CL-Offload-00*} */
#enable voice path for PCM VoIP by default
use.voice.path.for.pcm.voip=true
#enable dsp gapless mode by default
audio.offload.gapless.enabled=true
# disable AssetAtlas service.
config.disable_atlas=true
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.product-res-path=framework/SemcGenericUxpRes.apk
persist.sys.logkit.ctrlcode=0
keyguard.no_require_sim=true
ro.com.android.dataroaming=false
ro.com.android.dateformat=MM-dd-yyyy
ro.config.ringtone=xperia.ogg
ro.config.notification_sound=notification.ogg
ro.config.alarm_alert=alarm.ogg
ro.config.wallpaper=hero_flow_black.png
ro.nfc.on.default=true
ro.carrier=unknown
ro.vendor.extension_library=/vendor/lib/libqc-opt.so
persist.radio.apm_sim_not_pwdn=1
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=96m
dalvik.vm.heapsize=256m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=2m
dalvik.vm.heapmaxfree=8m
ro.setupwizard.mode=DISABLED
ro.com.google.gmsversion=4.4_r3
ro.com.google.clientidbase=android-sonyericsson
ro.com.google.clientidbase.ms=android-sonymobile
persist.sys.dalvik.vm.lib=libdvm.so
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.qc.sdk.izat.premium_enabled=1
ro.qc.sdk.izat.service_mask=0x5
persist.gps.qc_nlp_in_use=1
persist.loc.nlp_name=com.qualcomm.services.location
ro.gps.agps_provider=1
ro.drm.active.num=7
ro.drm.active.0=marlin,1
ro.drm.active.1=playready,1
ro.drm.active.2=dtla,1
ro.drm.active.3=marlin_import,1
ro.drm.active.4=ckb,1
ro.drm.active.5=widevine,1
ro.drm.active.6=dcp,1
ro.sony.fota.encrypteddata=supported
Mirrors Are Welcomed
Credits
M.Allen
Please Hit
If It Helps You
Click to expand...
Click to collapse
Bro can u port CM rom for T3 D5102 (Indian Version) or a stock android 4.4.4 , will be very helpful for us:good::good::good::good::good:

[FTF] Xperia T3 D5103 - 18.1.A.1.17 - Generic FR

Xperia™ T3 (D5103) Generic FR firmware FTF​
Android version : 4.4.2
Build number: 18.1.A.1.17
Customization Version: 1285-3451_R7B
Branding: Generic FR
Country: France
This works on ANY Xperia™ T3 (D5103).
Your Xperia™ T3 does NOT have to be rooted.
Your Xperia™ T3 does NOT have to be bootloader unlocked.
This does NOT re-lock a SIM unlocked phone (unlocking is ONCE and PERMANENT).
This does NOT unlock your bootloader.
Link :
Mediafire
Build.prop :
Code:
##### Merging of the /util/data/semc_kernel_time_stamp.prop file #####
ro.build.date=Wed Jul 2 06:19:37 CST 2014
ro.build.date.utc=1404253177
ro.build.user=user
ro.build.host=SB2
##### Final patch of properties #####
ro.build.product=D5103
ro.build.description=D5103-user 4.4.2 18.1.A.1.17 7vt_bw release-keys
ro.product.brand=Sony
ro.product.name=D5103
ro.product.device=D5103
ro.build.version.incremental=7vt_bw
ro.build.tags=release-keys
ro.build.fingerprint=Sony/D5103/D5103:4.4.2/18.1.A.1.17/7vt_bw:user/release-keys
######################## Customized property values #########################
ro.semc.version.cust=1285-3451
ro.semc.version.cust_revision=R7B
ro.somc.customerid=324
#############################################################################
################# Updating of the SW Version #################
ro.semc.version.fs_revision=18.1.A.1.17
ro.build.id=18.1.A.1.17
ro.build.display.id=18.1.A.1.17
##### Values from product package metadata #####
ro.semc.product.model=D5103
ro.semc.ms_type_id=PM-0730-BV
ro.semc.version.fs=GLOBAL-LTE
ro.semc.product.name=Xperia T3
ro.semc.product.device=D51
ro.product.model=D5103
# begin build properties
# autogenerated by buildinfo.sh
ro.si.version.sw_revision=2.24.J.1.34
ro.build.version.sdk=19
ro.build.version.codename=REL
ro.build.version.release=4.4.2
ro.build.type=user
ro.product.board=MSM8226
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=Sony
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=msm8226
# ro.build.product is obsolete; use ro.product.device
# Do not try to parse ro.build.description or .fingerprint
ro.build.characteristics=default
# end build properties
#
# from device/somc/seagull_lte/system.prop
#
#
# system.prop for msm8226
#
# Use reference RIL for initial bringup
#rild.libpath=/system/lib/libreference-ril.so
rild.libpath=/vendor/lib/libril-qc-qmi-1.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1
persist.radio.msgtunnel.start=false
# Start in cdma mode
#ro.telephony.default_network=5
#
# system props for the cne module
#
persist.cne.feature=1
# Skip /sys/power/wait_for_fb_* nodes and
# force FB to be always on
debug.sf.fb_always_on=1
debug.sf.hw=1
debug.egl.hw=1
debug.composition.type=c2d
persist.hwc.mdpcomp.enable=true
debug.mdpcomp.logs=0
dalvik.vm.heapsize=36m
dev.pm.dyn_samplingrate=1
persist.demo.hdmirotationlock=false
ro.hdmi.enable=true
qcom.hw.aac.encoder=true
#system props for the MM modules
media.stagefright.enable-player=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-fma2dp=true
media.stagefright.enable-scan=true
mmp.enable.3g2=true
mm.enable.smoothstreaming=true
#9273 is decimal sum of supported codecs in AAL
#codecs:(PARSER_)AVI AC3 ASF AAC QCP DTS 3G2 MP2TS
mm.enable.qcom_parser=37491
# VIDC: debug_levels
# 1:ERROR 2:HIGH 4:LOW 0:NOlogs 7:AllLogs
vidc.debug.level=1
#
# system props for the data modules
#
ro.use_data_netmgrd=true
persist.data.netmgrd.qos.enable=true
#system props for time-services
persist.timed.enable=true
#+{WP1L2P2-PC-DISTINGUISH_PROJECTS_VIA_SYSTEM_PROPERTY-01
# add product type property
ro.telephony.fxn_product_type=SEAGULL_LTE
#WP1L2P2-PC-DISTINGUISH_PROJECTS_VIA_SYSTEM_PROPERTY-01}+
#
# system prop for opengles version
#
# 196608 is decimal for 0x30000 to report version 3
ro.opengles.version=196608
#
# System props for telephony
# System prop to turn on CdmaLTEPhone always
#telephony.lteOnCdmaDevice=1//-WP1L2P2-PC-SET_CDMA_DEVICE_PROPERTY_TO_FALSE-01
#+{WP1L2P2-PC-SET_CDMA_DEVICE_PROPERTY_TO_FALSE-01
telephony.lteOnCdmaDevice=0
#WP1L2P2-PC-SET_CDMA_DEVICE_PROPERTY_TO_FALSE-01}+
#//+{WP1L2P2-AS-NETWORK_LIST_RAT_SUPPORT-01
persist.radio.rat_on=combine
#WP1L2P2-AS-NETWORK_LIST_RAT_SUPPORT-01}+
# simulate sdcard on /data/media
#
persist.fuse_sdcard=true
#
#snapdragon value add features
#
ro.qc.sdk.audio.ssr=false
##fluencetype can be "fluence" or "fluencepro" or "none"
ro.qc.sdk.audio.fluencetype=none
#+{WP1L2P3-AC-SET_RIL_LOG_LVL-01
#
# Set default adb_log_on value
#
persist.radio.adb_log_on=1
#WP1L2P3-AC-SET_RIL_LOG_LVL-01}+
persist.audio.fluence.voicecall=true
persist.audio.fluence.voicerec=false
persist.audio.fluence.speaker=true
#/* MM-KW-DISPLAY-00+{ */
# Enable/disable cabl
ro.qualcomm.cabl=0
#/* MM-KW-DISPLAY-00+} */
#MobileBraviaEngine2
ro.service.swiqi2.supported=true
persist.service.swiqi2.enable=1
# system prop for NFC DT
ro.nfc.port=I2C
#property to enable user to access Google WFD settings
persist.debug.wfd.enable=1
##property to choose between virtual/external wfd display
persist.sys.wfd.virtual=0
tunnel.audio.encode = true
#use VERY_HIGH_QUALITY for audio resampler
af.resampler.quality=4
#Buffer size in kbytes for compress offload playback
# System prop for drm
drm.service.enabled=true
#Added system property for xLoud and ClearPhase
ro.somc.clearphase.supported=true
ro.semc.xloud.supported=true
persist.audio.hp=true
audio.offload.buffer.size.kb=32
#/* MM-CL-Offload-00*{ */
#disbale tunnel mode playback by default
audio.offload.disable=1
#disbale offload audio video playback by default
av.offload.enable=false
#/* MM-CL-Offload-00*} */
#enable voice path for PCM VoIP by default
use.voice.path.for.pcm.voip=true
#enable dsp gapless mode by default
audio.offload.gapless.enabled=true
# disable AssetAtlas service.
config.disable_atlas=true
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.product-res-path=framework/SemcGenericUxpRes.apk
persist.sys.logkit.ctrlcode=0
keyguard.no_require_sim=true
ro.com.android.dataroaming=false
ro.com.android.dateformat=MM-dd-yyyy
ro.config.ringtone=xperia.ogg
ro.config.notification_sound=notification.ogg
ro.config.alarm_alert=alarm.ogg
ro.config.wallpaper=hero_flow_black.png
ro.nfc.on.default=true
ro.carrier=unknown
ro.vendor.extension_library=/vendor/lib/libqc-opt.so
persist.radio.apm_sim_not_pwdn=1
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=96m
dalvik.vm.heapsize=256m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=2m
dalvik.vm.heapmaxfree=8m
ro.setupwizard.mode=DISABLED
ro.com.google.gmsversion=4.4_r3
ro.com.google.clientidbase=android-sonyericsson
ro.com.google.clientidbase.ms=android-sonymobile
persist.sys.dalvik.vm.lib=libdvm.so
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.qc.sdk.izat.premium_enabled=1
ro.qc.sdk.izat.service_mask=0x5
persist.gps.qc_nlp_in_use=1
persist.loc.nlp_name=com.qualcomm.services.location
ro.gps.agps_provider=1
ro.drm.active.num=7
ro.drm.active.0=marlin,1
ro.drm.active.1=playready,1
ro.drm.active.2=dtla,1
ro.drm.active.3=marlin_import,1
ro.drm.active.4=ckb,1
ro.drm.active.5=widevine,1
ro.drm.active.6=dcp,1
ro.sony.fota.encrypteddata=supported
Credits
IaguCool for XperiFirm (I downloaded the firmware with this tool)